Vol.:02. Issue: 06 June 2018 Kala Surabhi-2018
Transcript of Vol.:02. Issue: 06 June 2018 Kala Surabhi-2018
1
Vol.:02. Issue: 06 June 2018
Kala Surabhi-2018
Angadi Institute of Technology and Management has organized 18th Visvesvaraya Technological University inter-
college Technological youth festival ―Kala Surabhi-2018‖ for 3 days from April 11th to 13
th 2018 at Angadi Institute of
Technology and Management, Belagavi. Over 5,000 students from more than 150 engineering colleges spread across
four regions of VTU were competed in various cultural events — fine arts, music, drama, dance and literature with
25 sub-events.
Inaguration of ―Kala-Surabhi‖ by Dr. Chandrashekhar Kambar, Dr. Karisiddappa, Dr. Annigeri, Dr. Spoorti Patil,
Dr. Sanjay Pujari and Prof. Anilkumar Korishetti.
Speech by Dr. Sanjay Pujari and Dr. Chandrashekhar Kambar
SURESH ANGADI EDUCATION FOUNDATION’S
ANGADI INSTITUTE OF TECHNOLOGY & MANAGEMENT
Savagaon Road, Belagavi-590009
2
Facilitation
3
Students Performance in Kala Surabhi-2018
4
5
Prize Distribution
6
STUDENTS ACHIEVEMENTS
Mr. Vishesh P Upparamani, Mr.Roshan V Suvarnkar, Miss Ruksar M Devadi and Miss Tejaswini M
Jorapur Computer Science And Engineering final year student‘s project entitled ―Automated Green
House‖ got sponsored by VTU Belagavi with financial assistance of Rs 5000.
Participants of ―Srishti State Level Engineering Student Project Exhibition‖ held at Dayanand Sagar College of
Engineering Bangalore on 22,23 and 24 May 2018 .
Vishesh P Upparamani, Mr.Roshan V Suvarnkar, Miss Ruksar M Devadi and Miss Tejaswini M Jorapur
student‘s final year project entitled ―Automated Green House‖ Participated in ‗Shristi –Project
Exhibition 2018‘ held at Dayanand Sagar College of Engineering, Bengaluru.
7
Rohan Bhatkande student of 8th Semester, CSE Successfully completed the course "Introduction to
Human Computer Interaction" with a consolidated score of 65% which was held by National
Programme on Technology Enhanced Learning (NPTEL) Online Certification.
Miss Bibi Fatima Telgi student of 8th Semester, CSE Successfully completed the course "Cloud
Computing" with a consolidated score of 60% which was held by National Programme on Technology
Enhanced Learning (NPTEL) Online Certification.
Miss Akshata Patil student of 8th Semester, CSE Successfully completed the courses "Introduction to
Modern Application Development‖ and ―Introduction to Human Computer Interaction‖ with a
consolidated score of 41% and 61% which was held by National Programme on Technology Enhanced
Learning (NPTEL) Online Certification.
PROJECT SPONSORSHIP
Students of AITM have received funding for their innovative projects from various organizations.
Visvesvaraya Technilogial University, Belagavi
Vishesh P Upparamani, Mr.Roshan V Suvarnkar, Miss Ruksar M Devadi and Miss Tejaswini M Jorapur
of Computer Science And Engineering department final year student‘s project entitled ―Automated
Green House‖ got sponsored by VTU Belagavi
Nasreen T., Misbah K., Nikita D. and Priyadarshini N. of Electronics and Communication Engineering
department project entitled ―Agriculture Bot‖ under the guidance of Prof. Anilkumar C. Korishetti, sponsored
by FOSS VTU Project exhibition 2018.
Karnataka State Council for Science and Technology, (KSCST):
Anita Heggond, Sushmita Thakkanavar, Sushma Dalal and Shweta Pujari of Electronics and Communication
Engineering department project entitled‖ Image Quality Improvement in kidney stone using Computed
Tomography Images.‖ under the guidance of Prof. Aravind Jadhav
Dundaya Hiremath and team members of Mechanical Engineering department project entitled ―Development and
Fabrication of Seed Storage System for Community Level Seed Bank and Marginal Farmers‖ under the guidance
of Prof.R H Angadi
8
Puneet Demashetti and team members of Mechanical Engineering department project entitled ―Development and
modification of pallet making machine using agriculture waste as residue as raw material and to calculate
calorific value for different compositions‖ under the guidance of Prof.V. Sushantkumar
Participation in Technical Events:
Students have participated and won in technical events organized by various organization
Avinash K. of 6th semester of EEE Participated in the ―SHRISTI‖ State level Project exhibition held at ―
Dayanand Sagar College of Engg , Bangalore on 24th May 2018.
Soumya Tubachi, Sushmita B., Prakash A. and Sreenivas B. of Electronics and Communication Engineering
department, under the guidance of Prof. Shriram K. V., participated in the ―SHRISTI‖ State level Project
exhibition held at ― Dayanand Sagar College of Engineering and demonstrated their innovative project entitled
―Information security for Image processing applications‖
Praveen kumar N. L., Mallappa Rachappanavar, Yallaling M. Kichadi and Deepali Wadekar Electronics and
Communication Engineering department, under the guidance of Prof. Anand Deshpande, participated and
demonstrated their innovative project entitled Smart Text Reader for visually challenged persons‖
Vishesh Upparamani, student of 8th Semester, CSE participated in JIGYASA‘18 NATIONAL EVENT
FESTIVAL held at Shaikh College of Engineering and Technology, Belagavi and secured the FIRST place in
Blind Coding.
9
Vishesh Upparamani, student of 8th Semester, CSE participated in JIGYASA‘18 NATIONAL EVENT
FESTIVAL held at Shaikh College of Engineering and Technology, Belagavi and secured the SECOND place in
Paper Presentation.
Mr. Shripad Patil, student of 8th Semester, CSE participated in JIGYASA‘18 NATIONAL EVENT
FESTIVAL held at Shaikh College of Engineering and Technology, Belagavi and secured the FIRST
place in Slow Biking.
10
The KSCST 41st
series Nodal Evaluation centre by IISC Scientis held at KLS GIT Belagavi on 24/5/2018
Participate the Dundayya Hiremath and group members.
The KSCST 41st
series Nodal Evaluation centre by IISC Scientis held at KLS GIT Belagavi on 24/5/2018
Participate the Puneet Demashetti and group members.
11
STUDENTS INNOVATIVE PROJECTS
Design &Fabrication of two stage Sarvonious & three blade Darrious Vertical axis wind turbine.
Design & Fabrication of improved Parabolic trough.
12
Design & Fabrication of Mixed mode type solar dryer using sensible heat storage material.
Invelox wind Turbine.
13
Mini Project Exhibition in ECE department: Department of Electronics and Communication has organized Mini Project
Exhibition for pre final year students on 18/05/2018. Mini projects for engineering students gives an edge over the race
of recruitment to work hard to ensure a good career. The importance of making mini-projects cannot be over stressed. In
spite of employment practices in recent times, students are progressively taking up mini-projects to pad up their skill-set
they add, where students have been placed in their third year before the final-year project. By doing electronics mini
projects, students can gain practical knowledge. In spite of theory concept we acquire, various industries also need to
know the capacity to complete projects using specific initiative. So, it is recommended that students do mini
engineering projects in their four years of engineering and try to present as many papers as possible in the engineering
third year.
STAFF ACHIEVEMENTS
Under the guidance of Prof. Manjunath Patil the FOSS project entitled ―Automated Green House‖ got
sponsored by VTU Belagavi with financial assistance of Rs 5000.
Under the guidance of Prof. Manjunath Patil the project entitled ―Automated Green House‖ Participated in
‗Shristi –Project Exhibition 2018‘ held at Dayanand Sagar College of Engineering, Bengaluru.
Prof. Satish changond and Prof R H Angadi Attended the one day workshop on ― AICTE Model Curriculum
2018-19‖ organized by VTU Belagavi on 17/05/2018.
Prof.R H Angadi and Mr.Akshay Harugoppa , Dundayya V H, Ajay S D, Mahindra B Published the paper on
―Development and Fabrication of Seed Storage System for Community Level Seed Bank and Marginal Farmers”
on IRJET (-International Research Journal of Engineering and Technology)- e-ISSN: 2395-0056 Volume: 05
Issue: 05 | May-2018.
14
STUDENT ARTICLES
Fastest Growing Technologies:
Wireless Communication Definition:
Wireless communication is the fastest growing and most vibrant technological areas in Mobile phones, GPS receivers,
Remote controls, Bluetooth audio and Wi-Fi etc . The communication field. Wireless communication, or simply
sometimes wireless, is the transfer of information or power between two or more points that are not connected by an
electric conductor. We live in a world of communication and wireless communication, in particular is a key part of our
daily lives. Some of the commonly used wireless communication systems s in our day to day life are:
Types of Wireless Communication:
Wireless communication technology is categorized into different types depending on the distance of communication, the
range of data and type of devices used. The following are the different types of wireless communication technologies.
1. Television and Radio Broadcasting: Radio is considered to be the first wireless service to be broadcast. It is an
example of simplex communication system where the information is transmitted only in one direction and all the users
receiving the same data.
2. Satellite Communication: Satellite Communication System is an important type of wireless communication. Satellite
Communication System offer telecommunication, positioning and navigation.
3. Wireless Local Area Network (Wi-Fi): Wi-Fi is a low cost and low power wireless communication, that is used by
various electronic devices like smart phones, laptops etc. in this setup, a router works as a communication hub
wirelessly.
4. Global Positioning System (GPS): GPS is solely a subcategory of satellite communication. GPS provides different
wireless services like navigation, positioning, location, speed etc. with the help of dedicated GPS receivers and satellite.
5. Mobile Communication System: The advancement of mobile networks is enumerated by generations. Many users
communicate across a single frequency band through mobile phones. Similar to GPS devices, some phones make use of
signals from satellite to communicate.
Advantages of Wireless Communication:
Information can be transmitted quickly with a high speed and accuracy.
The internet can be accessed from anywhere, at any time without any cables or wires.
Emergency situations can be alerted through wireless communication.
Wireless, no bunches of wire running out.
Communication can reach where wiring is not feasible and costly.
15
Disadvantages of Wireless Communication:
An unauthorized person can easily misuse the wireless signals which spread through the air.
It is very important to secure the wireless network to protect information.
Continuous exposure to any type of radiation can be hazardous and affect the health.
Applications of Wireless Communication:
Wireless Communication has wide applications in the areas of Space, Military, telecommunications, Wireless
power transmission, IOT, Radar communication, Artificial intelligence, Fiber optics and intelligent transport systems.
-Misbah Karnool.
(Electronics and Communication Dept)
2AG14EC018
REAL VALUE OF LIFE
I asked a rupee,
―What can you do?‖
It replied,
―I can break the love between a husband and wife,
I can turn mothers‘ and child‘s affection into hatred,
I can break long friendship within a few seconds,
I can cut and build and relations in the small age,
Like, between two brothers or sisters‖
I would never let such a rupee to come into my life,
This will force me to forget HUMANITY.
Nayan Palekar
2AG16EC020
16
Poornachandra Salian(2AG14ME069) of 8th
Sem Mechanical Eng Student drawn a Free hand sketch for
Somesh Kolvekar
Manthan Revankar (2AG15ME041) of 6th Sem Mechanical Eng Student drawn a Free hand sketch for Sir M.
Visvesvaraya.