morgue/autopsy room planning

25

25

25

25

25

25

20

25

25

25

25

25

25

Dissection/Autopsy Facility Planning20

155Thermo Shandon International: +44 (0) 1928 562600 • Fax: +44 (0) 1928 562627 • Freephone (UK): 0800 0189396Thermo Shandon Latin America/Canada: 1-412-788-2460 • Fax: 1-412-788-2480 Thermo Shandon USA: 1-800-547-7429 • 1-412-788-1133 • Fax: 1-412-788-1138

•• E-mail: [email protected]• Internet: http://www.thermoshandon.com

Morgue/Autopsy Room Planning

www.thermoshandon.com

http://www.thermoshandon.com

25

25

25

25

25

25

20

25

25

25

25

25

25

Dissection/Autopsy Facility Planning

P#156

20

Thermo Shandon International: +44 (0) 1928 562600 • Fax: +44 (0) 1928 562627 • Freephone (UK): 0800 0189396Thermo Shandon Latin America/Canada: 1-412-788-2460 • Fax: 1-412-788-2480 Thermo Shandon USA: 1-800-547-7429 • 1-412-788-1133 • Fax: 1-412-788-1138


General ConsiderationsRegardless of size, the following items needto be taken into consideration:

1. Sanitation, including provision forappropriate infection control and disinfection, specimen and tissue disposal and instrument sterilization.

2. Ventilation.

3. Gross specimen and body photography.

4. X-ray facilities, if medico-legal work is performed.

5. Collections of microbiological and toxicological specimens, includingsafeguards for specimens requiringchain of custody.

6. Refrigeration for specimens and supplies.

7. Dictation equipment.

Much thought should be given to the ventilation system. Consider a downdrafttable, when appropriate, instead of ventilation hoods. Surfaces should bedurable enough to withstand cutting, exposure to strong cleaning agents such as bleach, and exposure to chemicals such as formaldehyde. Surfaces should also be easy to clean.

LocationAccess for gurneys to the morgue must be provided. The location is further dictatedby the location of the loading ramp, to provide access for funeral directors to pick up bodies. The room should beaccessible to physicians and students to attend autopsies.

Work Flow The following suggestions are to serve as a guide. Data to be considered whendetermining the size and design of theAutopsy/Morgue suite include the following:

1. The number of autopsies to be performed yearly.

2. The number of autopsies to be performed simultaneously.

3. The number of general hospital autop-sies performed versus medical/legalautopsies.

4. Attendance of medical staff, students,law enforcement and other interestedparties at autopsies.

5. The number of bodies to be held at a given time in the morgue refrigerators.

Cadaver HandlingAppropriate gurneys must be provided totransport cadavers to the morgue. Once inthe morgue, movable lifts are required toraise and lower cadavers onto tables, storage racks and refrigerators. Considerthe ergonomics of the equipment and roomlayout. Will it be safe (and convenient) tolift, lower and move an 82" x 23" (208 x 58cm) body tray with an average 200 lb. load?

Functional Areas The most efficient morgue designs considerwork-flow patterns that allow for handling,post-mortem evaluation, and storage ofbodies. Consider providing rooms for specific activities such as the following:

1. Shower and Dressing Area.2. Preparations - Wash Room.3. Autopsy Area.4. Isolation Area.5. Dissection Area.6. Storage Area.7. Viewing Area.

Autopsy AreaAccommodations must be made for eviscer-ation to be done in this area. It will be ahigh activity area that will require a greatdeal of cleaning. This area should includetables and sinks and a dictation system.There are many models of autopsy andnecropsy tables available. Some are stationary, while others are mobile. Thetables should be at a comfortable workingheight. Adjustable tables such as theShandon LM-4 or LM-10 models allow thework surface to be raised or lowered to suitthe user. Check with local codes for built-ingarbage disposal use, vacuum breaker require-ments and liquid wastedisposal or collection.

Isolation AreaAn area isolated from therest of the morgue is need-ed for working on high-riskcases. It should bedesigned to decrease the potential spread ofpathogens. The areashould have its own autopsy table and sink. It is preferable for theinfectious area to have aventilation system that isseparate from the rest ofthe morgue facility.

Dissection AreaThis area should be designed to performdetailed organ dissection after evisceration.There should be adequate overhead lightingand dictation system. It may be part of theautopsy table, such as the LM-9 L-ShapedTable or at a specific dissection center such as the Grosslab Senior. If a cryostat s used for rapid diagnosis, the equipmentand the histologic slide staining should beplaced in the preparation room, not in theautopsy room.

Storage The design and layout should include somemeans of keeping the cadaver cold to inhibitdecay. A variety of refrigeration options isavailable including models with telescopingracks, roller systems and walk-in models.Racking systems should also be consideredin planning this section of the project.Consider installing double end-opening storage systems so that funeral home personnel can receive the body withoutentering the autopsy room.

Viewing AreaConsider including an area that is separatefrom the rest of the morgue facility wherethe family of the deceased can view thebody. Some options include the following:

1. A room with a viewing window or a curtained section.

2. Refrigerator with a telescopic racking system (preferably open at both ends).

3. Walk-in refrigerators with a window.

4. Video-tape viewing.

The Planning Process

Concrete FloorConcrete Floor



25

25

25

25

25

25

20

25

25

25

25

25

25




Total System ApproachEarly in the planning stages, we apply our“Total System” approach. We look at youroverall needs, thinking of body-handling interms of space utilization and work flow.Shandon can offer you as much or as littlehelp as you need.

• A world-wide sales staff to assist in project development.

• In-house engineering with computer-aideddrafting (CAD) capabilities.

• Expert manufacturing.

• Installation services.

• Technical support and service.

No other manufacturer of medical/mortuaryequipment offers this kind of personalizedconcept-to-completion support. It all addsup to greater savings and efficiency inspace, construction costs and productivityfor you.

Quality Certified–ISO 9001 Registered CompanyOur crafts people have perfected their skills and strive to build fine products. It is a tradition of pride that is reflectedthroughout the entire company in achievingISO 9001 Registration. The ISO registrationsignifies that at all levels of the companyconsistent quality systems are in place. It also means that we at Shandon havecarefully scrutinized our suppliers to be certain that only quality materials andgoods become Shandon products. We are audited semi-annually by an independent agency to maintain the ISO 9001 certification.

Pathology Laboratory Equipment, MorgueEquipmentShandon can equip your facility with dissecting, autopsy or necropsy tables,sinks, refrigerators, grossing stations andcabinetry. From simple work surfaces tocomplicated tables with integral downdraftsystems, sinks and hydro-aspirators, wehave a wide range of standard products to fit your needs.

Shandon CapabilitiesAnimal Research EquipmentVeterinary researchers know they candepend on a quality-built product. Shandonproduces equipment for veterinary and animal research, including the large animal necropsy table, grossing stationsand downdraft necropsy tables.

Free Autopsy/Mortuary Capabilities VideoSee the “Total System Approach” in action.The 7-minute video tours our fabricationfacility and lets you take a close look at thecraftsmanship that goes into Shandonproducts. Call or fax in your request for afree video today. Ask for “Total SystemSolutions”. Specify English or Spanish version and VHS, NTSC, PAL or PAL-M tape format.

Free Floor Layouts And DrawingsOur engineers and computer-aided draftingoperators can provide you with quick, complete drawings of your project on diskand as hard output.



Water supply lines on Shandon tablesare equipped with a special in-linevacuum breaker to act as an anti-siphoning device. The vacuum breakerprotects your facility’s potable watersupply by making it impossible forwater to accidentally re-enter thesupply line.

25

25

25

25

25

25

20

25

25

25

25

25

25


P#158

20



No Job Too Big Or Too SmallWhether it’s fabricating a small bracket attachment or designingand installing an entire facility, our staff welcomes the challenge.Our plant is equipped with state-of-the-art fabricating machine toolsto build products of the finest quality, regardless of size.

Custom Products Crafted To Your SpecificationShandon’s team of sales personnel, engineers and craftspeopleexcel in producing custom products to meet your unique space,ventilation and budgetary requirements. Of course, there is NOCHARGE for consultation. See the Quotation Request For CustomEquipment Worksheet on pages 164-166. This simple form outlinesthe type of questions that Shandon will need to answer to give youthe exact product that you want.

Custom Built To Your Specifications

Within the autopsy room, odors and fumes maybe present. To increase the safety of the area,particular attention should be paid to theinstallation of an efficient ventilation system.Shandon has a series of tables with a simpleyet effective design that pulls fumes down andaway from workers.

Shandon downdraft tables provide apassageway for fumes to be exhausted bydrawing air from the work surface to aroof vent.

Typically, a duct extends from the base of thetable through the floor. Waste water and airseparate in the table pedestal. Air drawn bythe facility-supplied fan vents to the roof ofthe building.

The underside of the pedestal is open to allowfor the optimal placement of utility tie-ins.

Shandon has an in-house air-flow specialistwho can assist your architects and engineersin designing a system that will provideexcellent efficiency.

Other ventilation system are available.Please call for specifics.

VaporsWater

Roof

FanWith Motor

ConcreteFloor

Work Surface

Shandon DowndraftVentilation Assembly

A Word About Ventilation Vacuum BreakersProtect WaterSupply

Safety Built In

TableBase

Plumbing

Exhaust Duct



25

25

25

25

25

25

20

25

25

25

25

25

25




Features And AccessoriesTabletop ConstructionShandon fabricates tabletops from 14-gauge stainless steel.Tabletops have a 14-gauge side stiffener welded into the long sides of the tables to provide maximum strength and durability.

Acoustical CoatingA special coating is applied to the undersides of autopsy tables for sound-deadening and to prevent condensation. It is finished in silver enamel.

Quality-Built for Easy SanitationCorners and sink bottoms of tables have large radii for easy,thorough cleaning. Welds in work areas are ground and polished for a smooth finish that requires minimal maintenance.

Anti-shock ReceptaclesPower-equipped 110/120V tables are provided with a GFCI (GroundFault Circuit Interrupter). The GFCI automatically stops the electricalsupply in the event of a ground fault condition. It is designed tominimize the potential of injury to the user. Units designed for220/240V have duplex receptacle which does not automatically stop current. You may connect the duplex receptacle to an RCD(Residual Current Device) to halt the electrical supply in the case of a ground fault condition.

Hand Spray Hose Most tables are equipped with a spray nozzle with on/off thumbcontrol and 6' of durable, reinforced tubing. It provides a strongstream of water for rinsing instruments and work surfaces.

Hydro-Aspirator with Reverse FlowStandard on several Shandon tables and available as an option on others. It provides powerful suction and areverse flow feature that relieves anyblockage in the line.

OptionsScale and Scale Bracket A 9kg scale (3kg x 10g) is available as an accessory for Shandon tables. It isavailable with a factory installed tablemount or on a portable autopsy scalestand. (See page 138.)

Slats Tabletops may be fitted with removableslats to support bodies instead of gridplates. Slats provide excellent fluid drainage.

OptionsDisposer UnitsHeavy-duty disposer units can befactory-installed on most tables. The unit comes complete with watersolenoid valve, vacuum breaker,water-tight on-off switch and thermaloverload protector. Standarddisposers are 3/4 HP. All plumbing and wiring is done at the factory. The unit is available for 110/120V or 220/240V tables.

Please check local ordinances beforeordering equipment with a disposer.

Metric and/or EnglishMeasurementMarkingsMost tables are available with optional engravedmeasurement markings. These markings can beetched into the top front orback edge of the table in

either metric units (cm/mm) or English units (inches/feet). Be sure to specify this feature at the time the table is ordered.

Continuous-Flow Table RinseA row of nozzles integrated into the table header sprays a continuous flow of water to flush away waste from the table surface.

Perimeter TableFlushing SystemPrecisely perforatedstainless steel tubefits the perimeter ofthe table worksurface. Use it towash over the entiretable surface at onetime. A flexible lineand control valveconnect the perimetertable flushing systemto the water supply. It is removable andcan be made to fit any Shandon table.

Lever DrainTables withoutdisposer systems may be produced with lever drains. The lever closes off the drain to preventaccidental loss of specimens during rinsing. The drain opens by simply lifting the lever.



25

25

25

25

25

25

20

25

25

25

25

25

25


P#160

20



Sinks Quick Comparison Chart

Standard Specifications

Models AN-68-C Wall-Mounted Sink AN-68-L Wall-Mounted Sink, AN-68-R Wall-Mounted SinkCenter Approach Left Approach Right Approach

#68105 AN-68-C W/Disposer, 110/120V #68125 AN-68-L W/Disposer, 110/120V #68145 AN-68-R W/Disposer, 110/120V

#68100 AN-68-C W/O Disposer, 110/120V #68120 AN-68-L W/O Disposer, 110/120V #68140 AN-68-R W/O Disposer, 110/120V

#68115 AN-68-L W/Disposer, 220/240V #68135 AN-68-L W/Disposer, 220/240V #68155 AN-68-R W/Disposer, 220/240V

#68110 AN-68-L W/O Disposer, 220/240V #68130 AN-68-L W/O Disposer, 220/240V #68150 AN-68-R W/O Disposer, 220/240V

Catalog Page 167-168 169-170 171-172

Configuration Stationary, Wall-Mounted Stationary, Wall-Mounted Stationary, Wall-Mounted

Work Surface 2 Rectangular, Sloped With 1 Rectangular, Sloped With 1 Rectangular, Sloped With Grid Plates for Flat Work Area Grid Plates for Flat Work Area Grid Plates for Flat Work Area

Rotation No No No

Height Adjustment No No No

Slats, Qty. No No No

Perforated Grid Plates 2 1 1

Sink Type Single Basin, Center Single Basin, Left Side Single Basin, Right Side

Sink Dimensions, in. 34 x 21 x 6 33 x 21 x 6 33 x 21 x 6

Sink Dimensions, cm. 85 x 53 x 15 85 x 53 x 15 85 x 53 x 15

Plumbing Yes Yes Yes

Hot/Cold Water Yes Yes Yes

Faucet 2 1 1

Vacuum Breaker Yes Yes Yes

Aspirator with Tubing Yes Yes Yes

Disposer Models #68105 and #68115 Models #68125 and #68135 Models #68145 and #68155

Storage

Shelves 1 1 1

Drawers 2 1 1

Venting System Duct Connection (Without Blower) Duct Connection (Without Blower) Duct Connection (Without Blower)

Electrical Outlets

110/120V, Qty., Type 2 Duplex GFCI 1 Duplex GFCI 1 Duplex GFCI

220/240V, Qty., Type 2 Duplex 1 Duplex 1 Duplex

Lights Two Double-Tube Fluorescent Fixtures One Double-Tube Fluorescent Fixture One Double-Tube Fluorescent Fixture

Dimensions L x W x H in inches 114 x 28 x 74 84 x 28 x 74 84 x 28 x 74

Dimensions L x W x H in centimeters 290 x 71 x 188 214 x 71 x 188 214 x 71 x 188

Weight in Pounds 900 700 700

Weight in Kilograms 408.2 317.5 317.5



25

25

25

25

25

25

20

25

25

25

25

25

25





Models LM-1 Standard Autopsy Table LM-4 Elevating Autopsy Table LM-8 Autopsy Table

#10085, LM-1 W/Disposer, 110/120V #10135, LM-4 W/Disposer, 110/120V #10105, LM-8 W/Disposer, 110/120V

#10080, LM-1 W/O Disposer, 110/120V #10130, LM-4 W/O Disposer, 110/120V #10100, LM-8 W/O Disposer, 110/120V

#10095, LM-1 W/Disposer, 220/240V #10145, LM-4 W/Disposer, 220/240V #10115, LM-8 W/Disposer, 220/240V

#10090, LM-1 W/O Disposer, 220/240V #10140, LM-4 W/O Disposer, 220/240V #10110, LM-8 W/O Disposer, 220/240V

Catalog Page 177-178 179-180 181-182

Configuration Stationary Stationary Stationary

Work Surface Rectangular Rectangular RectangularGrid Plates for Flat Work Area Grid Plates for Flat Work Area Grid Plates for Flat Work Area

Rotation No No No

Height Adjustment No Electrohydraulic No

Slats Optional Optional Optional

Perforated Grid plates 4 4 3

Sink Integral Integral Integral

Type Single Basin Single Basin Single Basin

Dimensions, in. 14 x 12 x 9.75 14 x 14 x 5 14 x 12 x 9.75

Dimensions, cm. 35.6 x 30.5 x 24.8 35.6 x 35.6 x 12.7 35.6 x 30.5 x 24.8



Faucet 1 1 1


Built-in Table Rinse Yes Yes Yes

Aspirator With Tubing Yes Yes Yes

Spray Hose Yes Yes Yes

Disposer Models #10085 and #10095 Models #10135 and #10145 Models #10105 and #10115

Storage No Yes No

Shelves No No No

Drawers Optional Optional No

Venting System Down draft Down draft Down draft

Electrical Outlets



Lights No No No

Dimensions L x W x H in inches 102 x 29.5 x 36 102 x 30 x 32 x 37 60 x 29.5 x 36

Dimensions L x W x H in centimeters 259.1 x 76.2 x 91.4 259.1 x 76.2 x 81.3 to 94.0 152.4 x 74.9 x 91.4



Autopsy Tables Quick Comparison Chart



25

25

25

25

25

25

20

25

25

25

25

25

25


P#162

20




Models LM-9 L Shaped Autopsy Table LM-10 Elevating, Rotating Autopsy Table

#10155, LM-9 W/Disposer, 110/120V #10175, LM-10 W/Disposer, 110/120V

#10150, LM-9 W/O Disposer, 110/120V #10170, LM-10 W/O Disposer, 110/120V

#10165, LM-9 W/Disposer, 220/240V #10185, LM-10 W/Disposer, 220/240V

#10160, LM-9 W/O Disposer, 220/240V #10180, LM-10 W/O Disposer, 220/240V

Catalog Page 183-184 185-186

Configuration Stationary Stationary

Work Surface L-Shaped RectangularGrid Plates for Flat Work Area Grid Plates for Flat Work Area

Rotation No 180°

Height Adjustment No Electrohydraulic

Slats Optional Optional

Perforated Grid plates 4 4

Sink Integral No

Type Single Basin

Dimensions, in. 14 x 12 x 9.75

Dimensions, cm. 35.6 x 30.5 x 24.8

Plumbing Yes Yes

Hot/Cold Water Yes Yes

Faucet 1 No

Vacuum Breaker Yes Yes

Built-in Table Rinse Yes Yes

Aspirator With Tubing Yes Yes

Spray Hose Yes Yes

Disposer Models #10155 and #10165 Models #10175 and #10185

Storage No Yes

Shelves No No

Drawers Optional Optional

Venting System Down draft Down draft

Electrical Outlets

110/120V, Qty., Type 1 Duplex GFCI 1 Duplex GFCI

220/240V, Qty., Type 1 Duplex 1 Duplex

Lights No No

Dimensions L x W x H in inches 102 x 29.5 x 36 Side Wing: 60 x 24 x 36 88.5 x 29.5 x 32 to 37

Dimensions L x W x H in centimeters 229 x 75 x 91 Side Wing: 152 x 61 x 91 224.8 x 74.9 x 81.3 to 94.0

Weight in Pounds 900 745

Weight in Kilograms 408.2 337.9

Autopsy Tables Quick Comparison Chart



25

25

25

25

25

25

20

25

25

25

25

25

25





Models AN-59 Necropsy Dissecting Table DU-11 LM-8 Autopsy Table

#10275, AN-59, W/Disposer, 110/120V #10415, DU-11 W/Disposer, 110/120V #10105, LM-8 W/Disposer, 110/120V

# 10280, AN-59, W/O Disposer, 110/120V #10410, DU-11W/O Disposer, 110/120V #10100, LM-8 W/O Disposer, 110/120V

# 10285, AN-59, W/Disposer, 220/240V #10425, DU-11, W/Disposer, 220/240V #10115, LM-8 W/Disposer, 220/240V

# 10270, AN-59, W/O Disposer, 220/240V #10420, DU-11 W/O Disposer, 220/240V #10110, LM-8 W/O Disposer, 220/240V

Catalog Page 187-188 189-190 191-192

Configuration Stationary Stationary Stationary

Tabletop Rectangular, Sloped With Rectangular, With Rectangular, WithGrid Plates for Flat Work Area Grid Plates for Flat Work Area Grid Plates for Flat Work Area

Rotation No No No

Height Adjustment No No No

Slats, Qty. No No No

Perforated Grid Plates 3 3 3

Sink Type Integral, Single Basin Integral, Single Basin Integral, Single Basin

Dimensions, in. 14 x 12 x 9.75 14 x 12 x 9.75 14 x 12 x 9.75

Dimensions, cm 35.6 x 30.5 x 24.8 35.5 x 30.5 x 24.8 35.5 x 30.5 x 24.8



Faucet 1 1 1


Built-in Table Rinse No Yes Yes

Aspirator With Tubing Optional Yes Yes

Disposer On Models #10275 and #10285 On Models #10415 and #10420 On Models #10105 and #10115

Storage No No No

Shelves

Drawers

Venting System Backdraft Down Draft Down Draft

Electrical Outlets



Lights Double-Tube Fluorescent Fixture No No

Dimensions L x W x H in inches 60 x 25 x 58 114 x 28 x 74 60 x 29.5 x 36

Dimensions L x W x H in centimeters 152.4 x 63.5 x 147.3 289.6 x 71 x 187.9 152.4 x 74.9 x 91.4



Stationary Necropsy Tables Quick Comparison Chart



25

25

25

25

25

25

20

25

25

25

25

25

25


P#164

20



Quotation Request For Shandon Custom EquipmentShandon can match your specification. Please copy the following form. Fill it in and fax it to us at (814) 833-8642 (Export Customers fax (412) 788-2480). We will promptly respond to your request.

Contact Information

1 Sales Rep. Name: 2 Today’s Date: 3 Quotation Due Date:

4 Customer Name: 5 Account Number:

6 E-mail: 7 Phone:

8 Contact: 9 Fax:

10 Customer Address:

11 Project Name (End User):

12 Type of Quotation: ■■ Firm ■■ Budget 13 Type of Request: ■■ New ■■ Revised

Equipment Profile

14 Equipment Description:

15 Describe the application:

16 Critical dimensions of unit (L x W x H):

17 Modified from/similar to Shandon Inc model number:

18 Electrical Voltage: 19 Hertz 20 Phase:

21 Plumbing Requirements:

22 Agency Approvals Required (UL, IEC 1010, CSA, CE):

23 Special Requirements

Delivery/Installation Access

24 Room location: (Floor of Building):

25 Is a loading dock available: 26 Elevator Size:

27 Lowest door or ceiling height: 28 Narrowest opening:

29 Is moving equipment available: (lift, hoist, crane etc):

30 Requested Items 31 Installation 32 Construction Specifications

■■ Approval Drawing ■■ Union Installation ■■ New Construction

■■ Reference Drawing ■■ Non-Union Installation ■■ Existing (No construction)

■■ Utility Tie-In Drawing ■■ Installation Not Required ■■ Renovations

■■ Facility Drawing

■■ Quotation

■■ Written Specification

(page 1 of 3)



25

25

25

25

25

25

20

25

25

25

25

25

25




■■ Downdraft Ventilation Assembly

■■ Dual Exhaust Duct

■■ Single Exhaust Duct

■■ Disposer, 1/2 Hp Voltage:

■■ Disposer, 3/4 Hp Voltage:

■■ Fluorescent Light, 110/120V

■■ Fluorescent Light, 220/240V

■■ 110/120V GFCI

■■ 220/240V Hospital Grade Duplex Receptacle

■■ Air Cock

■■ Built-In Table Rinse

■■ Deluxe Aspirator Assembly

■■ Eye Wash Station

■■ Hand Spray (Standard)

■■ Hand Spray (Stainless Steel)

■■ Perimeter Rinse

■■ Grid Plates

■■ Slats - 5" (12.7 cm) Wide

■■ Slats - 7" (17.78 cm) Wide

■■ Gas Cock

■■ Scale Support Bracket (For No. 1320 Or No. 1330 Scale)

■■ Centimeter Markings

■■ Inch/Foot Markings

■■ Lever Handle Drain With Overflow (W/O Disposer Only)

■■ Lever Handle Drain Without Overflow (W/O Disposer Only)

Quotation Request Continued (page 2 of 3)

33 Select Options

34 Outlet Type Required (Export only-If different from American Standard)

European

EU1-15R EU1-15P

15 Ampere 250 VoltEuropean “SHUKO”receptacle and plug Non-polarizedReceptacle CEE 7Plug CEE 7-7

Australia

AU1-10R AU1-10P

10 Ampere 250 VoltAustralian receptacle andplugPolarized (AS/NZS3112 1993)

Denmark

DE1-10R DE1-10P

10 Ampere 250 VoltDanishreceptacle and plug Polarized (A1SNII 107-2-01)

France

FR1-15R EU1-15P

15 Ampere 250 VoltFrench receptacleGrounding Pin at6:00 positionPolarized CEE 7-7 Plug

AU2-15R AU2-15P

15 Ampere 250 VoltAustralian receptacle andplugPolarized (AS/NZS3112 1993)

Israel

IS1-15R IS1-15P

15 Ampere 250 VoltIsraelireceptacle and plug Polarized (S1-32)

United Kingdom

UK1-13R UK1-13P

13 Ampere 250 VoltUnited Kingdomreceptacle andfused plug Polarized (BS1363A)

Italy

IT1-10R IT-10P

10 Ampere 250 VoltItalianreceptacle and plug Non-polarized (CE 23-16/VII 1971)

Japan

JA1-15R JA1-15P

15 Ampere 125 VoltJapanesereceptacle and plug Polarized (JIS 8303)

UK2-15R UK2-15P

15 Ampere 250 VoltUnited Kingdomreceptacle and plug Polarized (85 546A)

IT2-15R IT2-15P

15 Ampere 250 VoltItalianreceptacle and plug Non-polarized (CE 23-16/VII 1971)

JA1-15R JA1-15P

15 Ampere 125 VoltJapaneselocking receptacleand plug Polarized (JIS 8303)

UK3-5R UK3-5P

5 Ampere 250 VoltUnited Kingdomreceptacle and plug Polarized (85 546A)

Switzerland

SW1-10R SW1-10P

10 Ampere 250 VoltSwissreceptacle and plug Polarized (SEV1011, 1959)

Other (Please sketch)

Configuration CodeEU=Europe, FR=France, DE=Denmark, SW=Switzerland, IT=Italy, UK=United Kingdom, AU=Australia, IS=Israel, JA=JapanNote: The nominal voltage for European single phase systems (not UK) will be changed to 220/240V/50Hz/1ø by 2003.

35 NotesPlease attach room/refrigerator sketch including: extrusions/recesses in walls, ceiling height, and all dimensions. If desired, sketch andlabel equipment onto layout as required. Please include any personal sketches of custom equipment. Please include any photographs that may be useful during design. Also attach a list of any standard equipment to be included with quotation/drawings.



25

25

25

25

25

25

20

25

25

25

25

25

25


P#166

20



Quotation Request Continued (page 3 of 3)

Refrigerator/Freezer Specifications

36 Critical Dimensions of the unit (L x W x H):

37 ■■ Use the dimensions of the standard size unit (smaller) which are closest to specified critical dimension (from line 36)

38 ■■ Use the critical dimension (from line 36)

39 Type Of Unit 40 Box Location 41 Indoor Location Level

■■ Refrigerator ■■ Outdoor ■■ Basement (No level below)

■■ Freezer ■■ Indoor ■■ Main Floor (Level below)

■■ Combination ■■ Other Floor (Specify)

42 Exterior Front/Door 43 Exterior Remaining 44 Interior Walls/Ceiling

■■ 22 ga S/S (Standard) ■■ 26 ga Stucco Galvalume (Std.) ■■ 26 ga Stucco Galvalume (Std.)

■■ Custom (Specify) ■■ Custom (Specify) ■■ Custom (Specify)

45 Interior Floor 46 Floor Type

■■ 14 ga Galvanized Steel (Reinforced) ■■ Type 1: Standard (Interior or Exterior Ramp)

■■ Other (Specify) ■■ Type 2: Recessed without Ramp

■■ Type 4: Floorless

47 Door Type 48 Thermometer

■■ In-fitting, Standard (42” x 84”) ■■ 2.5” (5.08 cm) Diameter Dial (Standard)

■■ In-fitting, Custom (Specify L x W x H) ■■ Digital with Alarm (Optional Modularm 75b)

■■ Manual Sliding Door, Standard (48” x 84”) ■■ 6” (15.24 cm) Temperature Recorder (Optional Dickson KTx7 Day Electric)

■■ Sliding Door, Custom (Specify L x W x H) ■■ Digital with Alarm (Optional Modularm 75b)

Lighting

■■ 49 Additional Vaporproof Incandescent Lights. Specify Quantity:

■■ 50 Additional Fluorescent Lights. Specify Quantity:

51 Closure Panels And Trim Strips

■■ No ■■ Yes (Specify)

52 Accessories

■■ Shelving ■■ Viewport ■■ Bumper Rail ■■ Other (Specify)

Condenser

53 Volts: 54 Hz: 55 Phase:

Evaporator

56 Volts: 57 Hz: 58 Phase:

59 Evaporator Coil

■■ Standard ■■ Low-Profile Center Mounted

60 Condenser Type

■■ Air-cooled (Standard) ■■ Water-cooled

61 Condenser Location

■■ Indoor/Top Mount ■■ Indoor/Side Mount ■■ Other Indoor Location (Specify)

■■ Outdoor/Concrete Pad ■■ Outdoor/Roof

Distance from Box (Horizontal and Vertical):

Note: Shandon Inc. is not responsible for final utility connections.



morgue/autopsy room planning

Documents

Transcript of morgue/autopsy room planning