Oracle University | Contact Us: +27 (0)11 319-4111

PTR Only Entry Level-Servers and Oracle Hardware Support Principles (TDC-1001) - SP

Duration: 5 Days

What you will learnDay 1 Introductions About the course Sun System Handbook Electrostatic Discharge Day 2 Service processors, with LABs on tip, ALOM and ILOM setup and connection ( serial and network ) Oracle X86hardware range overview Oracle X86 machine architecture X4270 Service manual and Lab on FRU replacement on X86HW .

Day 3 Sparc Entry-level machine power on sequence POST + OBP ( Variables and their meaning, as well as OBP upgrades )Physical Device Paths Sparc Entry-level range and Architecture overview Fault management in Sparc hardware ashandled by the SP How faults are monitored How faults are reported How faults arre cleared ( with or without actual HWreplacement ) POST and PSH fault handling Lab on T1000s covering Connection to SP Finding the fault Preparing forfix actual HW fix ( and HW lab ) test and verify the fix return the machine to normal state. Day 4 T5240 Service manual HW FRU replacement LAB on T5220 Blade 6000 overview Blade 6000 HW lab ( and Blade 8000demo ) Blade 6000 configuration through ILOM Disk Blade management in Blade 6000 ( including REM & NEM basics) Day 5 Enterprise Installation Standards ( EIS ) History and why structure of DVD Setup standard ( + LAB ) Patching using EISdvd ( + LAB ) EIS checklists Solaris Utility Environment ( SUE ) Where to get How to use Certification Test on week 1contents.

Copyright 2012, Oracle. All rights reserved. Page 1