PRODUCTION AND TEST PACKER and Test Packer - Retrievable.pdf · PDF filePRODUCTION AND...

Click here to load reader

  • date post

    03-Feb-2018
  • Category

    Documents

  • view

    233
  • download

    2

Embed Size (px)

Transcript of PRODUCTION AND TEST PACKER and Test Packer - Retrievable.pdf · PDF filePRODUCTION AND...

  • PRODUCTION AND TEST PACKER RETRIEVABLE____________________________________________________BOTIL MODEL BM MECHANICALSET PACKERProduct No. BI 643-01

    DESCRIPTION & APPLICATIONThe BOTIL Model BM is mechanical setretrievable high performance productionPacker. It is designed to meet the demandsof high pressure fracturing procedures, aswell as production applications. The Packeris set in compression, allowing finalpositioning in compression, tension orneutral.

    FEATURES/BENEFITS

    Ease of setting and release, onefourth turn right-hand rotation to set,one forth right-hand rotation torelease

    Superior sealing system with threeelement stack

    Independent lower and upper JayAssemblies contributing to short,compact design

    No O-ring required Built in un loader with bonded deal

    for bypass Bypass opens before release of

    upper slips for safety and ease ofrelease

    Rated to 10,000 psi @ 350F Fully tested in minimum to maximum

    API tolerances for each specifiedcasing weight

    Temperature tested with multiplePressure reversals

    Tension loads compatible withtubing string @ 10,000 psi

    Staged upper slip release with solidupper cone

    Full tubing ID Packer bore

    SPECIFICATION GUIDECasing Packer Casing

    OD WeightRange

    PackerSize

    GageRing OD

    PackerI.D.

    Min ID Max ID

    In. mm (lb/ft) In. In. In. In.

    5-1/2 139.720-23 45A2 4.500

    2.375

    4.578 4.86817-20 45A4 4.600 4.696 4.976

    15.5-17 45B 4.720 4.819 5.031

    7 177.826-29 47B2 6.174 6.174 6.38123-26 47B4 6.256 6.266 6.46620-23 47B 6.239 6.239 6.570

    62.I

  • PRODUCTION AND TEST PACKER RETRIEVABLE

    ____________________________________________________ BOTIL MODEL BTCN MECHANICAL SET PACKER Product No. BI 643-02 DESCRIPTION & APPLICATION The Botil Model BTCN Retrievable Production Packer meets several zone isolation, production, and injection requirements. Full opening design gives unrestricted flow and allows Wireline tools to pass. Mechanical lock-setting action holds substantial pressure from above or below without tubing weight or tension. No hydraulic anchor is required to prevent packer movement, even with differential pressures. Packers ability to absorb tubing expansion or contraction forces makes the BTCN right for both pumping and injection wells. The large internal bypass reduces swabbing effect when running-in or retrieving. When packer is set, by pass is automatically sealed. The BTCN also features of upper slip releasing system that reduces the strain required to release the slips by dislocating a key non-directional slip first which automatically releases the other slips. this mechanical feature replaces the hold down system found in other tools making it independent of pressure variations.

    FEATURE & BENEFITS:

    Tension set for shallow applications

    Three assemblies are available; small bore, large bore and high pressure

    Can leave the tubing in a tension, compression or neutral condition

    Holds pressure from above or below

    Right hand set, right hand release

    jay setting and releasing mechanism

    internal by-pass internal pressure unloader seal

    is located below the upper slips; this allows debris to be flushed away from hold-down slips before releasing

    botilmailText Box62.II

  • PRODUCTION AND TEST PACKER RETRIEVABLE

    ____________________________________________________ SPECIFICATION GUIDE

    CASING CASING ID RANGE MAX OD OF

    TOOL

    PACKER

    BORE

    THREAD CONNECTIO

    N BOX UP/

    PIN DOWN

    PACKER SIZE SIZE

    WEIGHT (LBS/FT)

    MIN (IN)

    MAX

    (IN)

    5 1/2

    20-23 4.629 4.852 4.500 2.000 2 3/8 EU 8 RD 450-200 14-17 4.851 5.075 4.625 462-200 15.5-17 4.851 5.016 2.375 2 7/8 EU 8 RD 462-237 20-23 4.629 4.852 4.500 450-237

    7

    29-35 5.952 6.237 5.812 2.500 2 7/8 EU 8 RD

    581-250 26-32 6.042 6.342 5.875 587-250 17-26 6.224 6.611 6.000 600-250 26-32 6.042 6.361 5.875 3.000 3 1/2 EU 8 RD 587-300 17-26 6.224 6.611 6.000 600-300

    9 5/8 43.5-53.5 8.463 8.866 8.250 4.000 4 1/2 EU 8 RD 825-400 32.3-43.5 8.683 9.101 8.500 850-400

    botilmailText Box62.III

  • PRODUCTION AND TEST PACKER RETRIEVABLE

    ____________________________________________________ BOTIL MODEL BTCN-1 MECHANICAL SET PACKER Product No. BI 643-03 DESCRIPTION & APPLICATION The Botil Model BTCN-1 Retrievable Production Packer meets several zone isolation, production, and injection requirements. Full opening design gives unrestricted flow and allows Wireline tools to pass. Mechanical lock-setting action holds substantial pressure from above or below without tubing weight or tension. No hydraulic anchor is required to prevent packer movement, even with differential pressures. Packers ability to absorb tubing expansion or contraction forces makes the BTCN-1 right for both pumping and injection wells. The large internal bypass reduces swabbing effect when running-in or retrieving. When packer is set, by pass is automatically sealed. The BTCN-1 also features of upper slip releasing system that reduces the strain required to release the slips by dislocating a key non-directional slip first which automatically releases the other slips. this mechanical feature replaces the hold down system found in other tools making it independent of pressure variations.

    FEATURE & BENEFITS:

    Tension set for shallow applications

    Three assemblies are available; small bore, large bore and high pressure

    Can leave the tubing in a tension, compression or neutral condition

    Holds pressure from above or below

    Right hand set, right hand release

    jay setting and releasing mechanism

    internal by-pass internal pressure unloader seal

    is located below the upper slips; this allows debris to be flushed away from hold-down slips before releasing

    botilmailText Box62.IV

  • PRODUCTION AND TEST PACKER RETRIEVABLE

    ____________________________________________________ SPECIFICATION GUIDE

    CASING CASING ID RANGE MAX OD OF

    TOOL

    PACKER

    BORE

    THREAD CONNECTIO

    N BOX UP/

    PIN DOWN

    PACKER SIZE SIZE

    WEIGHT (LBS/FT)

    MIN (IN)

    MAX

    (IN)

    5 1/2

    20-23 4.629 4.852 4.500 2.000 2 3/8 EU 8 RD 450-200 14-17 4.851 5.075 4.625 462-200 15.5-17 4.851 5.016 2.375 2 7/8 EU 8 RD 462-237 20-23 4.629 4.852 4.500 450-237

    7

    29-35 5.952 6.237 5.812 2.500 2 7/8 EU 8 RD

    581-250 26-32 6.042 6.342 5.875 587-250 17-26 6.224 6.611 6.000 600-250 26-32 6.042 6.361 5.875 3.000 3 1/2 EU 8 RD 587-300 17-26 6.224 6.611 6.000 600-300

    9 5/8 43.5-53.5 8.463 8.866 8.250 4.000 4 1/2 EU 8 RD 825-400 32.3-43.5 8.683 9.101 8.500 850-400

    botilmailText Box62.V

  • MODEL BHRL HYDRAULIC RETRIEVABLE PACKER MODEL BHRL HYDRAULIC RETRIEVABLE PACKER PRODUCT No. BI 646-90 DESCRIPTION: Botil Model BHRL is a hydraulically set, straight-pull, shear release retrievable packer. It is used in vertical and deviated wellbore or in application in which single or multiple packers are set after the wellhead has been installed. A modular shell and body design for low to medium pressure differentials allows configuration as a single-string production packer. Its compact, modular design makes the BHRL an economical choice for production applications. The BHRL is installed with the completion tubing and is set by applying pressure to the tubing. Retrieval of the BHRL is accomplished with a straight upward pull on the tubing. Once the tension on the tubing string exceeds the shear value of the release pins, the slips disengage the casing, and the element relaxes. Set at the factory to a standard value, the packer-shear release mechanism can be adjusted in the field just before installation. FEATURES: No Tubing Manipulation required while setting of the Packer. The Packer

    can be set after the well is flanged up and the tubing is displaced. Opposed Double grip slips (Bi-Directional) prevent movement of the

    Packer in either direction due to pressure differentials. Large Flow Path ID. Straight pull shear release. Adjustable shear release. Field proven sealing element Minimized end effect on shear-release screws. Slips located below the Packing Elements. Double Piston design prevents tubing movement while setting. Double Lock ring sustain Pack-off and Slip grip mechanically after setting.

    BENEFITS: Simplified operations reduce rig costs. Eliminates tubing movement during installation. Prevents debris build up above slips. Facilitates circulating out debris before retrieval. Positive casing grip secures packer.

    botilmailText Box68.I

  • MODEL BHRL HYDRAULIC RETRIEVABLE PACKER

    APPLICATIONS: Single string completion Zonal Isolation. Vertical, deviated or horizontal well bores.

    SPECIFICATION GUIDE:

    Casing Size

    Casing Weight

    Max O.D Packer I.D* * Differential Rating(Psi)

    Min. tubing Setting

    Pressure(psi) 7 23-26 6.090 2.426,2.992 7,000

    3500

    7 26-29 6.000 2.426,2.992 7,000 7 29-32 5.910 2.426,2.992 7,000 7 32-35 5.850 2.426,2.992 7,000

    7 5/8 24-29.7 6.690 2.992 7,000 3000 7 5/8 33.7-39 6.440 2.992 7,000

    9 5/8 40-47 8.463 2.992,3.910,4.733 7,000 3000 9 5/8 47-