Production and Test Packer - Retrievable

8/17/2019 Production and Test Packer - Retrievable

1/30


2/30


3/30


4/30

PRODUCTION AND TEST PACKER RETRIEVABLE

____________________________________________________

BOTIL MODEL “BM” MECHANICALSET PACKER

Product No. BI 643-01

DESCRIPTION & APPLICATIONThe BOTIL Model “BM” is mechanical setretrievable high performance productionPacker. It is designed to meet the demandsof high pressure fracturing procedures, aswell as production applications. The Packer is set in compression, allowing finalpositioning in compression, tension or neutral.

FEATURES/BENEFITS

Ease of setting and release, onefourth turn right-hand rotation to set,one – forth right-hand rotation torelease

Superior sealing system with threeelement stack

Independent lower and upper Jay Assemblies contributing to short,compact design

No O-ring required

Built in un loader with bonded deal

for bypass Bypass opens before release of

upper slips for safety and ease of release

Rated to 10,000 psi @ 350°F

Fully tested in minimum to maximum API tolerances for each specifiedcasing weight

Temperature tested with multiplePressure reversals

Tension loads compatible with

tubing string @ 10,000 psi Staged upper slip release with solid

upper cone

Full tubing ID Packer bore

SPECIFICATION GUIDECasing Packer Casing

OD Weight

Range

Packer

Size

Gage

Ring OD

Packer

I.D.

Min ID Max ID

In. mm (lb/ft) In. In. In. In.

5-1/2” 139.720-23 45A2 4.500

2.375

4.578 4.86817-20 45A4 4.600 4.696 4.976

15.5-17 45B 4.720 4.819 5.031

7” 177.8

26-29 47B2 6.174 6.174 6.381

23-26 47B4 6.256 6.266 6.466

20-23 47B 6.239 6.239 6.570

62.I


5/30


____________________________________________________

BOTIL MODEL “BTCN” MECHANICALSET PACKER

Product No. BI 643-02

DESCRIPTION & APPLICATION

The Botil Model “BTCN” RetrievableProduction Packer meets severalzone isolation, production, andinjection requirements. Full openingdesign gives unrestricted flow andallows Wireline tools to pass.Mechanical lock-setting action holds

substantial pressure from above orbelow without tubing weight ortension. No hydraulic anchor isrequired to prevent packer movement,even with differential pressures.Packer’s ability to absorb tubingexpansion or contraction forcesmakes the “BTCN” right for bothpumping and injection wells. The largeinternal bypass reduces swabbingeffect when running-in or retrieving.

When packer is set, by pass isautomatically sealed. The “BTCN”also features of upper slip releasingsystem that reduces the strainrequired to release the slips bydislocating a key non-directional slipfirst which automatically releases theother slips. this mechanical featurereplaces the hold down system foundin other tools making it independent ofpressure variations.

FEATURE & BENEFITS:

Tension set for shallowapplications

Three assemblies areavailable; small bore, largebore and high pressure

Can leave the tubing in atension, compression or neutral

condition

Holds pressure from above orbelow

Right hand set, right hand

release jay setting and releasing

mechanism

internal by-pass

internal pressure unloader sealis located below the upperslips; this allows debris to beflushed away from hold-downslips before releasing


6/30


____________________________________________________

SPECIFICATION GUIDE

CASINGCASING ID

RANGEMAX

ODOF

TOOL

PACKE

R

BORE

THREAD

CONNECTIO

NBOX UP/

PIN DOWN

PACKERSIZE

SIZE

WEIGHT

(LBS/FT)

MIN

(IN)

MA

X

(IN)

5 1/2

20-23 4.629 4.852 4.5002.000 2 3/8 EU 8 RD

450-200

14-17 4.851 5.0754.625

462-200

15.5-17 4.851 5.0162.375 2 7/8 EU 8 RD

462-237

20-23 4.629 4.852 4.500 450-237

7

29-35 5.952 6.237 5.812

2.500 2 7/8 EU 8 RD

581-250

26-32 6.042 6.342 5.875 587-250

17-26 6.224 6.611 6.000 600-250

26-32 6.042 6.361 5.8753.000 3 1/2 EU 8 RD

587-300

17-26 6.224 6.611 6.000 600-300

9 5/843.5-53.5 8.463 8.866 8.250

4.000 4 1/2 EU 8 RD825-400

32.3-43.5 8.683 9.101 8.500 850-400


7/30


____________________________________________________

BOTIL MODEL “ BTCN-1”MECHANICAL SET PACKERProduct No. BI 643-03

DESCRIPTION & APPLICATION

The Botil Model “BTCN-1” RetrievableProduction Packer meets severalzone isolation, production, andinjection requirements. Full openingdesign gives unrestricted flow andallows Wireline tools to pass.Mechanical lock-setting action holdssubstantial pressure from above orbelow without tubing weight or

tension. No hydraulic anchor isrequired to prevent packer movement,even with differential pressures.Packer’s ability to absorb tubingexpansion or contraction forcesmakes the “BTCN-1” right for bothpumping and injection wells. The largeinternal bypass reduces swabbingeffect when running-in or retrieving.When packer is set, by pass isautomatically sealed. The “BTCN-1”also features of upper slip releasingsystem that reduces the strainrequired to release the slips bydislocating a key non-directional slipfirst which automatically releases theother slips. this mechanical featurereplaces the hold down system foundin other tools making it independent ofpressure variations.

FEATURE & BENEFITS:

Tension set for shallowapplications

Three assemblies areavailable; small bore, largebore and high pressure

Can leave the tubing in atension, compression or neutralcondition

Holds pressure from above or

below

Right hand set, right handrelease

jay setting and releasingmechanism

internal by-pass

internal pressure unloader sealis located below the upperslips; this allows debris to beflushed away from hold-downslips before releasing


8/30


____________________________________________________

SPECIFICATION GUIDE

CASING CASING IDRANGE MAXOD

OF

TOOL

PACKE

R

BORE

THREADCONNECTIO

N

BOX UP/

PIN DOWN

PACKER

SIZESIZE

WEIGHT

(LBS/FT)

MIN

(IN)

MA

X

(IN)

5 1/2

20-23 4.629 4.852 4.5002.000 2 3/8 EU 8 RD

450-200

14-17 4.851 5.0754.625

462-200

15.5-17 4.851 5.0162.375 2 7/8 EU 8 RD

462-237

20-23 4.629 4.852 4.500 450-237

7

29-35 5.952 6.237 5.812

2.500 2 7/8 EU 8 RD

581-250

26-32 6.042 6.342 5.875 587-250

17-26 6.224 6.611 6.000 600-250

26-32 6.042 6.361 5.8753.000 3 1/2 EU 8 RD

587-300

17-26 6.224 6.611 6.000 600-300

9 5/843.5-53.5 8.463 8.866 8.250

4.000 4 1/2 EU 8 RD825-400

32.3-43.5 8.683 9.101 8.500 850-400


9/30


10/30


11/30


12/30


13/30


14/30


15/30

MODEL ‘BHRL’ HYDRAULIC RETRIEVABLE PACKER


PRODUCT No. BI 646-90

DESCRIPTION:Botil Model ‘BHRL’ is a hydraulically set, straight-pull, shear releaseretrievable packer. It is used in vertical and deviated wellbore or inapplication in which single or multiple packers are set after the wellheadhas been installed. A modular shell and body design for low to mediumpressure differentials allows configuration as a single-string productionpacker. Its compact, modular design makes the BHRL an economicalchoice for production applications.

The BHRL is installed with the completion tubing and is set by applyingpressure to the tubing. Retrieval of the BHRL is accomplished with a

straight upward pull on the tubing. Once the tension on the tubing stringexceeds the shear value of the release pins, the slips disengage the casing,and the element relaxes. Set at the factory to a standard value, the packer-shear release mechanism can be adjusted in the field just beforeinstallation.

FEATURES:

• No Tubing Manipulation required while setting of the Packer. The Packercan be set after the well is flanged up and the tubing is displaced.

• Opposed Double grip slips (Bi-Directional) prevent movement of the

Packer in either direction due to pressure differentials.• Large Flow Path ID.• Straight pull shear release.• Adjustable shear release.• Field proven sealing element• Minimized end effect on shear-release screws.• Slips located below the Packing Elements.• Double Piston design prevents tubing movement while setting.• Double Lock ring sustain Pack-off and Slip grip mechanically after setting.

BENEFITS:

• Simplified operations reduce rig costs.• Eliminates tubing movement during installation.• Prevents debris build up above slips.• Facilitates circulating out debris before retrieval.• Positive casing grip secures packer.

68.I


16/30


APPLICATIONS:

• Single string completion

• Zonal Isolation.• Vertical, deviated or horizontal well bores.

SPECIFICATION GUIDE:

CasingSize

CasingWeight

Max O.D Packer I.D* * DifferentialRating(Psi)

Min. tubingSetting

Pressure(psi)

7 23-26 6.090 2.426,2.992 7,000

35007 26-29 6.000 2.426,2.992 7,000

7 29-32 5.910 2.426,2.992 7,0007 32-35 5.850 2.426,2.992 7,000

7 5/8 24-29.7 6.690 2.992 7,00030007 5/8 33.7-39 6.440 2.992 7,000

9 5/8 40-47 8.463 2.992,3.910,4.733 7,00030009 5/8 47-53.5 8.354 2.929,3.910,4.733 7,000

** I.D may vary depending on End connection selected.

68.II


17/30


18/30


19/30


20/30


21/30


22/30


23/30


24/30


25/30


26/30


27/30


28/30


29/30


30/30

Production and Test Packer - Retrievable

Documents

Transcript of Production and Test Packer - Retrievable