Type T Squeeze Packer - Pro-Test Well · PDF filea compression packer. This packer is ideal...

Click here to load reader

  • date post

    16-Mar-2018
  • Category

    Documents

  • view

    232
  • download

    3

Embed Size (px)

Transcript of Type T Squeeze Packer - Pro-Test Well · PDF filea compression packer. This packer is ideal...

  • To order, call (800) 441-3504or visit www.dlmfg.com We Know Downhole.

    46 D&L Oil Tools Product catalog Made in tHe u.S.a. rev 02/10 #620#621

    Special Featuresu Holds pressure from above or below

    u Safety release allows circulation around the slips

    u Full opening

    u Optional setting configuration

    u Bi-directional slips

    The D&L Type T Squeeze Packer is a tension set packer that holds pressure from above or below. The tool can be set at any depth and is used when insufficient weight is available to set a compression packer. This packer is ideal for squeeze cementing, testing, stimulation and straddle operations using a Retrievable Bridge Plug. Two versions of Type T Squeeze Packers are offered: the standard three-element packer (shown) that uses ASI-X elements (P/N 621XX), and a two- element packer (P/N 620XX).

    The D&L Tension Unloader is generally run above the Type T Squeeze Packer allowing pressure equalization before releasing the packer. It also provides a by-pass when running and retrieving to minimize swabbing of the elements.

    The Type T Squeeze Packer emergency release system incorporates a left-hand, high-ratio thread. Applying right-hand torque relaxes the packing element and moves the lower cone away from the slips enabling them to retract.

    Type T Squeeze Packer

    Quality ISO 9001

    Health & Safety AS 4801 Australian - Accredited - Committed

    To o r d e r, C a l l + 6 1 ( 0 ) 7 4 6 2 2 6 8 0 0o r v i s i t w w w. p r o - t e s t . c o m . a u

  • 47D&L Oil Tools Product catalogrev 02/10 Made in tHe u.S.a.

    To order, call (800) 441-3504or visit www.dlmfg.comWe Know Downhole.

    #620#621

    Type T Squeeze Packer Product Specifications

    *Other sizes and connections available upon request

    casing

    Size(inches)

    Weight(lbs/ft)

    recommended Hole Size

    (inches)

    tool oD(inches)

    tool ID(inches)

    Thread connectionBox up/Pin Down

    PartNumber

    6.4-6.5 2.375-2.441 2.250 0.75 1.660EUE 620252-7/8

    14-20 5.352-5.552 5.188 2.00 2-3/8EUE 621606

    24-29.7 6.875-7.025 6.672 2.50 2-7/8EUE 621757-5/8

    33.7-39 6.625-6.765 6.453 2.50 2-7/8EUE 62176

    32.3-43.5 8.755-9.001 8.500 3.00 3-1/2EUE 621959-5/8

    43.5-53.5 8.535-8.755 8.250 3.00 3-1/2EUE 62196

    32.75-55.5 9.760-10.192 9.500 4.00 4-1/2EUE 6211010-3/4

    48-77 12.275-12.715 12.000 4.00 4-1/2EUE 6211313-3/8

    9.5-11 3.476-3.548 3.250 1.62 2-3/8EUE 620404

    9.5-11 3.476-3.546 3.250 1.63 2-3/8EUE 62140 9.5-11 3.476-3.548 3.250 1.63 2-3/8EUE

    62045

    4-1/2 9.5-13.5 3.920-4.090 3.750 2.00 2-3/8EUE 62145

    15.1-16.9 3.740-3.826 3.594 1.63 2-3/8EUE 62143

    9.5-13.5 3.920-4.090 3.750 2.00 2-3/8EUE

    13-18 4.276-4.494 4.125 2.00 2-3/8EUE 62150

    5 62052

    18-20.8 4.156-4.276 4.000 2.00 2-3/8EUE 62152 18-20.8 4.156-4.276 4.000 2.00 2-3/8EUE

    62055

    5-1/2 14-20 4.778-5.012 4.625 2.00 2-3/8EUE 62155

    20-23 4.670-4.778 4.500 2.00 2-3/8EUE 62157

    14-20 4.778-5.012 4.625 2.00 2-3/8EUE

    621656-5/8

    24-28 5.791-5.921 5.625 2.50 2-7/8EUE 62065 24-28 5.791-5.921 5.625 2.50 2-7/8EUE

    17-23 6.366-6.538 6.187 2.50 2-7/8EUE 62072

    7 17-26 6.276-6.538 6.000 2.50 2-7/8EUE 62171

    62070

    26-32 6.094-6.276 5.875 2.50 2-7/8EUE 62170 26-32 6.094-6.276 5.875 2.50 2-7/8EUE

    20-28 8.017-8.191 7.750 3.00 3-1/2EUE 62186

    8-5/8 2.50 2-7/8EUE 62085

    24-40 7.725-8.097 7.500 3.00 3-1/2EUE 62185 24-40 7.725-8097 7.500

    Quality ISO 9001

    Health & Safety AS 4801 Australian - Accredited - Committed

    To o r d e r, C a l l + 6 1 ( 0 ) 7 4 6 2 2 6 8 0 0o r v i s i t w w w. p r o - t e s t . c o m . a u

  • 48 D&L Oil Tools Product catalog Made in tHe u.S.a. rev 02/10

    To order, call (800) 441-3504or visit www.dlmfg.com We Know Downhole.

    #525

    Special Featuresu Apply set-down weight to open,

    and tension to close

    u Unloads pressure from either direction

    u May be run in open or closed position

    u Bonded seal allows repeated opening

    u Transmits torque for packer operations

    The SC Tension Unloader provides a means of equalizing tubing and annulus pressures when used with a tension packer. It also serves as a by-pass to allow fluid to pass through the mandrel of the packer while running the tubing string in and out of the well.

    SC Tension Unloader

    Size(inches)

    tool oD(inches)

    tool ID(inches)

    Thread connectionBox up/Pin Down

    PartNumber

    2.250 0.88 1.660EUE 525047/8

    3.250 1.63 2-3/8EUE 525061-5/8

    3.750 2.00 2-3/8EUE 525202-3/8

    4.500 2.50 2-7/8EUE 525252-7/8

    5.250 3.00 3-1/2EUE 525353-1/2

    6.250 4.00 4-1/2EUE 525454-1/2

    Product Specifications

    *Other sizes and connections available upon request

    Quality ISO 9001

    Health & Safety AS 4801 Australian - Accredited - Committed

    To o r d e r, C a l l + 6 1 ( 0 ) 7 4 6 2 2 6 8 0 0o r v i s i t w w w. p r o - t e s t . c o m . a u

  • 49D&L Oil Tools Product catalogrev 02/10 Made in tHe u.S.a.

    To order, call (800) 441-3504or visit www.dlmfg.comWe Know Downhole.

    #531

    Special Featuresu Standard J-slot locks in open

    and closed positions

    u Standard J-slot is right-hand close, right-hand open

    u J-slot is available in various configurations

    The Compression Unloader is de-signed as a high-pressure accessory for compression set packers. The Unloader is run above the packer in the open position. After the packer is run to setting depth, the procedures required to set the packer will automatically close the unloader. The J-slot locks in both the open and closed positions. With the packer set and the unloader closed, well operations may proceed. When run above a compression set packer, the Unloader is opened by rotating the tubing 1/4 turn and picking up (standard is right-hand close, right-hand open). After opening the unloader, allow differential pressure to equalize before releasing the packer below.

    Compression Unloader

    Product Specifications

    *Other sizes and connections available upon request

    Size(inches)

    tool oD(inches)

    tool ID(inches)

    Thread connectionBox up/Pin Down

    PartNumber

    3.750 2.00 2-3/8EUE 531454-1/2

    4.500 2.50 2-7/8EUE 531555-1/2

    Quality ISO 9001

    Health & Safety AS 4801 Australian - Accredited - Committed

    To o r d e r, C a l l + 6 1 ( 0 ) 7 4 6 2 2 6 8 0 0o r v i s i t w w w. p r o - t e s t . c o m . a u

  • 50 D&L Oil Tools Product catalog Made in tHe u.S.a. rev 02/10

    To order, call (800) 441-3504or visit www.dlmfg.com We Know Downhole.

    #724#725

    The D&L AS Retrievable Bridge Plug is a high pressure plug for multiple zone and selective single zone operations such as acidizing, fracturing, cementing and testing. It features a large internal by-pass to reduce swabbing when run-ning and retrieving. The by-pass valve closes when the plug is set.

    When unsetting, the by-pass valve opens before releasing the upper slips to allow pressure equalization. The by-pass is located directly below the upper slips to help wash debris when the by-pass is open. This tool can be set shallow in unsupported casing to contain pressure while working on wellhead equipment.

    Special Featuresu 1/4 right-hand set and release

    (standard)

    u Large by-pass

    u Set shallow or deep

    u Pressure equalization before release

    u High pressure rating

    u Additional J-slot arrangements available

    AS Retrievable Bridge Plug

    Quality ISO 9001

    Health & Safety AS 4801 Australian - Accredited - Committed

    To o r d e r, C a l l + 6 1 ( 0 ) 7 4 6 2 2 6 8 0 0o r v i s i t w w w. p r o - t e s t . c o m . a u

  • 51D&L Oil Tools Product catalogrev 02/10 Made in tHe u.S.a.

    To order, call (800) 441-3504or visit www.dlmfg.comWe Know Downhole.

    #724#725

    AS Retrievable Bridge Plug Product Specifications

    *Other sizes and connections available upon request

    Thread connection

    Pin Down

    casing

    Size(inches)

    Weight(lbs/ft)

    recommended Hole Size

    (inches)

    tool oD(inches)

    Part Number

    Std Wireline

    7.7-10.2 2.922-3.068 2.781 1.900EUE 72535 724353-1/2

    9.5-11 3.476-3.548 3.250 1.900EUE 72540 -4

    9.5-13.5 3.920-4.090 3.750 2-3/8EUE 72545 72445

    4-1/2 15.1 3.826 3.656 2-3/8EUE 72544 -

    15.1-16.6 3.754-3.826 3.625 2-3/8EUE 72541 72441

    11.5-15 4.408-4.560 4.125 2-3/8EUE 72550 724505

    18-21 4.154-4.276 3.969 2-3/8EUE 72552 72452

    9-13 5.044-5.192 4.812 2-3/8EUE 72554 72454

    5-1/2 13-20 4.778-5.044 4.625 2-3/8EUE 72555 72455

    20-23 4.670-4.778 4.500 2-3/8EUE 72557 72457

    17-20 5.352-5.450 5.188 2-3/8NUE 72560 -6

    17-24 5.921-6.135 5.750 2-3/8EUE 72567 72467

    6-5/8 24-32 5.675-5.921 5.500 2-3/8EUE 72565 72465

    32-35 5.575-5.675 5.375 2-3/8EUE 72566 72466

    17-26 6.276-6.538 5.969 2-3/8EUE 72570 724707

    26-32 6.094-6.276 5.875 2-3/8EUE 72571 72471

    24-29.7 6.875-7.025 6.672 2-3/8EUE 72575 72475

    7-5/8 29.7-33.7 6.765-6.875 6.527 2-3/8EUE 72576 72476

    33.7-39 6.625-6.765 6.453 2-3/8EUE 72577 72477

    20-28 8.071-8.191 7.750 3-1/2EUE 72581 -8-5/8

    24-40 7.725-8.097 7.500 3-1/2EUE 72585 72485

    32.3-43.5 8.755-9.001 8.500 3-1/2