ZXG10 IBSC (V6.30.103) Alarm and Notification Handling Reference_579008
ZXG10 IBSC (V6.30.103) Status Management Operation Guide
-
Upload
helder-gove -
Category
Documents
-
view
248 -
download
8
description
Transcript of ZXG10 IBSC (V6.30.103) Status Management Operation Guide
-
ZXG10 iBSCBase Station Controller
Status Management Operation Guide
Version:V6.30.103
ZTE CORPORATIONNo. 55, Hi-tech Road South, ShenZhen, P.R.ChinaPostcode: 518057Tel: +86-755-26771900Fax: +86-755-26770801URL: http://ensupport.zte.com.cnE-mail: [email protected]
-
LEGAL INFORMATIONCopyright 2013 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided as is, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
Revision No. Revision Date Revision Reason
R1.0 20130605 First Edition
Serial Number: SJ-20130408113951-023
Publishing Date: 2013-06-05(R1.0)
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ContentsAbout This Manual ......................................................................................... I
Chapter 1 Overview.................................................................................... 1-1
Chapter 2 Basic Operations ...................................................................... 2-1
2.1 Opening the Status Management Tab.................................................................. 2-1
2.2 Querying LED Status.......................................................................................... 2-3
2.3 Querying or Synchronizing NTP Time .................................................................. 2-4
2.4 Performing FTP User Operations ........................................................................ 2-4
2.5 Exporting Data to an EXCEL File......................................................................... 2-5
2.6 Refreshing the Status of a Managed Object ......................................................... 2-5
2.7 Rebooting the Entire System............................................................................... 2-6
2.8 Querying RNC State........................................................................................... 2-6
2.9 Querying IMSI Local Switch ................................................................................ 2-7
Chapter 3 Physical Resources.................................................................. 3-1
3.1 Viewing Controller Rack Information .................................................................... 3-1
3.2 Board ................................................................................................................ 3-2
3.2.1 Querying Time ......................................................................................... 3-2
3.2.2 Querying Disk Space................................................................................ 3-2
3.3 Physical CPU..................................................................................................... 3-3
3.3.1 Querying CPU Usage ............................................................................... 3-3
3.3.2 Querying Memory Usage .......................................................................... 3-3
3.4 Unit ................................................................................................................... 3-3
3.4.1 Querying Unit State .................................................................................. 3-3
3.5 CPU Subunit ...................................................................................................... 3-4
3.5.1 Querying Subunit State............................................................................. 3-4
3.6 Managing Logical E1 Ports ................................................................................. 3-4
3.7 Managing Logical E3 Ports ................................................................................. 3-4
3.8 Managing Logical T3 Ports ................................................................................. 3-5
3.9 Managing Logical Ethernet Ports......................................................................... 3-5
3.10 Managing Logical POS Ports ............................................................................ 3-5
3.11 Managing DSP Subunits ................................................................................... 3-5
3.12 Slave Subunit................................................................................................... 3-6
3.12.1 Querying Slave Subunit State.................................................................. 3-6
3.12.2 Blocking Subunits................................................................................... 3-6
I
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
3.12.3 Unblocking Subunits ............................................................................... 3-6
3.13 STM-1 physical port.......................................................................................... 3-6
3.13.1 Querying Fiber Port Status...................................................................... 3-6
3.13.2 Turning on Fiber Port .............................................................................. 3-7
3.13.3 Turning off Fiber Port .............................................................................. 3-7
3.14 Managing Physical STM-4 Ports........................................................................ 3-7
3.15 Ethernet physical port ....................................................................................... 3-7
3.15.1 Querying External Port Status ................................................................. 3-7
3.15.2 Turning on External Ports........................................................................ 3-8
3.15.3 Turning off External Ports........................................................................ 3-8
Chapter 4 Transmission Resources ......................................................... 4-1
4.1 Association ........................................................................................................ 4-1
4.1.1 Establishing Associations.......................................................................... 4-1
4.1.2 Shutting Down Associations...................................................................... 4-1
4.1.3 Aborting Associations ............................................................................... 4-2
4.1.4 Establishing All Associations (M3UA) ........................................................ 4-2
4.1.5 Shutting Down All Associations (M3UA)..................................................... 4-2
4.1.6 Aborting All Associations (M3UA) .............................................................. 4-2
4.1.7 Querying SCTP Association State ............................................................. 4-3
4.2 Querying AS State.............................................................................................. 4-3
4.3 ASP .................................................................................................................. 4-3
4.3.1 Querying ASP State ................................................................................. 4-3
4.3.2 Enabling ASP........................................................................................... 4-3
4.3.3 Disabling ASP.......................................................................................... 4-4
4.3.4 Activating ASP ......................................................................................... 4-4
4.3.5 Inactivating ASP....................................................................................... 4-4
4.4 Signalling Link.................................................................................................... 4-5
4.4.1 Querying MTP3 Link Status ...................................................................... 4-5
4.4.2 Querying SNM Link Status........................................................................ 4-5
4.4.3 Querying the Current Load of MTP3 Link ................................................... 4-5
4.4.4 Inhibiting MTP3 Link ................................................................................. 4-5
4.4.5 Uninhibiting MTP3 Link............................................................................. 4-6
4.4.6 Activating MTP3 Link................................................................................ 4-6
4.4.7 Deactivating MTP3 Links .......................................................................... 4-6
4.4.8 Starting Spying SNM Links ....................................................................... 4-7
4.4.9 Stopping Spying SNM Links...................................................................... 4-7
4.5 Signalling Linkset ............................................................................................... 4-7
II
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
4.6 SSCOP Link ...................................................................................................... 4-8
4.7 Remote Signaling Point ...................................................................................... 4-8
4.7.1 Querying Status of Remote Office ............................................................. 4-8
4.7.2 Querying the Current Load of Remote MTP3 Link ...................................... 4-8
4.8 Blocking/Unblocking Local SSN Subsystem ......................................................... 4-9
4.9 Querying Valid Band of Transport Paths............................................................... 4-9
4.10 Querying Valid Band of Transport Path Groups................................................... 4-9
4.11 Querying DHCP Client Configuration Status ....................................................... 4-9
Chapter 5 GSM Radio Resources ............................................................. 5-1
5.1 PCM at Interface A ............................................................................................. 5-1
5.1.1 Querying PCM Status at Interface A .......................................................... 5-1
5.1.2 Blocking PCM at Interface A ..................................................................... 5-2
5.1.3 Unblocking PCM at Interface A.................................................................. 5-2
5.1.4 Equipping PCM at Interface A ................................................................... 5-2
5.1.5 Un-equipping PCM at Interface A .............................................................. 5-3
5.2 Trunk at Interface A ............................................................................................ 5-3
5.2.1 Querying Trunk Status at Interface A ......................................................... 5-3
5.2.2 Blocking the Trunk at Interface A............................................................... 5-3
5.2.3 Unblocking the Trunk at Interface A ........................................................... 5-4
5.2.4 Spying the Trunk at Interface A ................................................................. 5-4
5.2.5 Stopping Trunk Spy at Interface A ............................................................. 5-4
5.3 Resetting Circuit at Interface A............................................................................ 5-5
5.4 PCM at Virtual Interface A................................................................................... 5-5
5.4.1 Querying PCM Status at Virtual Interface A................................................ 5-5
5.4.2 Blocking PCM at Virtual Interface A ........................................................... 5-5
5.4.3 Ubblocking PCM at Virtual Interface A ....................................................... 5-5
5.4.4 Equipping PCM at Virtual Interface A......................................................... 5-6
5.5 Trunk at Virtual Interface A.................................................................................. 5-6
5.5.1 Querying Remote Trunk Status at Interface A............................................. 5-6
5.5.2 Blocking the Remote Trunk at Interface A .................................................. 5-6
5.5.3 Unblocking Remote Trunk at Interface A .................................................... 5-6
5.6 Operating ATER PCM......................................................................................... 5-7
5.7 Time Slot at Interface Ater................................................................................... 5-7
5.7.1 Querying Trunk Status at Ater Interface ..................................................... 5-7
5.7.2 Blocking Time Slot at Interface Ater and Releasing Circuit .......................... 5-7
5.7.3 Blocking Time Slot at Interface Ater and Not Releasing Circuit .................... 5-7
5.7.4 Unblocking Trunk at Interface Ater............................................................. 5-7
III
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
5.8 Resetting ITC Office ........................................................................................... 5-7
5.9 MSC Office ........................................................................................................ 5-8
5.9.1 Querying MSC Status ............................................................................... 5-8
5.9.2 Using MSC .............................................................................................. 5-8
5.9.3 UNLD MSC.............................................................................................. 5-8
5.9.4 Disabling MSC Office ............................................................................... 5-9
5.9.5 Resetting MSC Office ............................................................................... 5-9
5.9.6 Resetting IP Resources ............................................................................ 5-9
5.10 Slave Subunit (GSM) ...................................................................................... 5-10
5.11 NSVC ............................................................................................................ 5-10
5.11.1 Querying NSVC Status ......................................................................... 5-10
5.11.2 Blocking NSVC..................................................................................... 5-10
5.11.3 Unblocking NSVC..................................................................................5-11
5.11.4 Resetting NSVC ....................................................................................5-11
5.12 SGSN Office ...................................................................................................5-11
5.12.1 Querying SGSN Status ..........................................................................5-11
5.12.2 Enabling SGSN.....................................................................................5-11
5.12.3 Disabling SGSN ................................................................................... 5-12
5.12.4 Unloading SGSN.................................................................................. 5-12
5.13 Querying Local End Status.............................................................................. 5-12
5.14 Querying Peer End Status............................................................................... 5-12
5.15 NSE .............................................................................................................. 5-13
5.15.1 Querying NSE Status............................................................................ 5-13
5.15.2 Configuring Remote IP and Port of NSE................................................. 5-13
5.15.3 Re-configuring Incremental NSE ........................................................... 5-13
5.15.4 Querying Dynamic Endpoint Status ....................................................... 5-13
5.16 BTS............................................................................................................... 5-14
5.17 Frequency...................................................................................................... 5-15
5.17.1 Querying TRX Status............................................................................ 5-15
5.17.2 Blocking FU TRX.................................................................................. 5-15
5.17.3 Unblocking FU TRX.............................................................................. 5-16
5.17.4 Blocking CU TRX ................................................................................. 5-16
5.17.5 Unblocking CU TRX ............................................................................. 5-16
5.17.6 Query Relation Between TRX and RRU................................................. 5-17
5.17.7 Query Up Inter Band............................................................................. 5-17
5.18 Time Slot ....................................................................................................... 5-17
5.18.1 Querying TS Status .............................................................................. 5-17
IV
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
5.18.2 Querying TS Channel Status................................................................. 5-17
5.18.3 Blocking TS ......................................................................................... 5-18
5.18.4 Unblocking TS...................................................................................... 5-18
5.18.5 Force Handing-Over TS........................................................................ 5-18
5.18.6 Querying Connect Status by TS ............................................................ 5-19
5.18.7 Querying Connect Status by IMSI.......................................................... 5-19
5.18.8 Spying the Status of a Channel ............................................................. 5-19
5.18.9 Stopping the Channel Spy..................................................................... 5-20
5.19 GSM Module.................................................................................................. 5-20
5.19.1 Querying Channels in GMODULE ......................................................... 5-20
5.19.2 Quitting Stream Control ........................................................................ 5-20
5.19.3 Adjusting Cell Loads in Module.............................................................. 5-20
5.20 BVC .............................................................................................................. 5-21
5.20.1 Querying BVC Status............................................................................ 5-21
5.20.2 Blocking BVC....................................................................................... 5-21
5.20.3 Unblocking BVC ................................................................................... 5-21
5.20.4 Resetting BVC ..................................................................................... 5-22
5.20.5 Resetting Signalling.............................................................................. 5-22
5.21 ABIS.............................................................................................................. 5-22
5.21.1 Querying Time Slot Status at Interface Abis ........................................... 5-22
5.21.2 Blocking Time Slot at Interface Abis....................................................... 5-22
5.21.3 Unblocking Time Slots at Interface Abis ................................................. 5-23
5.21.4 Starting Status Monitoring at the Abis Interface ...................................... 5-23
5.21.5 Stopping Status Monitoring at the Abis Interface..................................... 5-23
5.22 Querying Time Slot Usage at Interface Abis ..................................................... 5-24
5.23 Querying Abis Device Status........................................................................... 5-24
5.24 GSITE ........................................................................................................... 5-24
5.25 Resetting Site Rack ........................................................................................ 5-24
5.25.1 Resetting Site Rack .............................................................................. 5-25
5.25.2 Resetting a Board................................................................................. 5-25
5.26 Querying Ring Network Status ........................................................................ 5-26
5.27 LAPD CPU..................................................................................................... 5-27
5.27.1 Querying LAPD Master/Slave Status ..................................................... 5-27
5.27.2 Switching Between LAPD Master and Slave........................................... 5-27
Figures............................................................................................................. I
Tables ............................................................................................................ III
Glossary .........................................................................................................V
V
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
VI
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
About This ManualPurpose
This manual provides a guide for ZXG10 iBSC Status Management.
Intended Audience
This manual is intended for:
l Telecommunication engineersl Maintenance engineers
What Is in This Manual
This manual contains the following chapters:
Chapter Summary
1, Overview Gives an overview of the status management
functions.
2, Basic Operations Describes the basic operations, such as querying
LEDstatus and NTP time.
3, Physical Resources Describes the operations related to physical
resource status management.
4, Transmission Resources Describes the operations related to transmission
resource status management.
5, GSMRadio Resources Describes the operations related to GSM radio
resource status management.
I
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
II
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 1OverviewStatus management is a function of the operation and maintenance subsystem. It helpsdebugging upper-level services and on-site installation, and analyzing system faults.Through status management, maintenance and technical personnel can quickly locatefaults.
The status management enables users to manage the dynamic data in the system,including:
l Querying dynamic data: Users can obtain status data of the resources through theNMS client.
l Monitoring dynamic data: Users can view the real time changes on dynamic data.l Operating dynamic data: Through the NMS client, users can perform the following
operations on the resources: block/unblock, reset/forcible reset, enable/disable, andstop/start.
As a multi-aspect and multi-module function, status management involves databaseoperations, Managed Object (MO) operations, NE-BSC communication, and BSCoperations.
Note:l The objects of status management are only the ground and radio resources with status
properties. Those without status properties are not shown in the status managementinterface.
l During status management, the communication between the BSC and NEs must beproper.
l Status management operations should not be performed unless absolutely necessarybecause they may affect the quality of conversational services.
1-1
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
This page intentionally left blank.
1-2
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 2Basic OperationsTable of Contents
Opening the Status Management Tab.........................................................................2-1Querying LED Status..................................................................................................2-3Querying or Synchronizing NTP Time.........................................................................2-4Performing FTP User Operations ...............................................................................2-4Exporting Data to an EXCEL File................................................................................2-5Refreshing the Status of a Managed Object ...............................................................2-5Rebooting the Entire System......................................................................................2-6Querying RNC State...................................................................................................2-6Querying IMSI Local Switch........................................................................................2-7
2.1 Opening the Status Management Tab
Prerequisite
l You have logged in the client of the network management system.l The client is properly connected to a network element (NE).
Steps
1. On the menu bar, select View > Status Management. The Status Management tabis displayed, see Figure 2-1.
2-1
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
Figure 2-1 Status Management Tab
2. Select Root Node > GERAN Subnetwork > Managed Network Element. TheConfiguration Resource Tree is expanded, see Figure 2-2.
Figure 2-2 Expanded Configuration Resource Tree
3. Double-click a managed object. The corresponding management tab is displayed inthe right pane.
2-2
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 2 Basic Operations
4. Perform the related management actions on an object.
End of Steps
2.2 Querying LED StatusIf a resources is not operating properly, you can query the LED status to check whetherthe fault is caused by abnormal LED.
Prerequisite
The Network Management System (NMS) operates properly.
The network element is connected to the NMS properly.
Steps
1. On the toolbar, click . The LED status query dialog box is displayed.
Figure 2-3 LED Status Query Dialog Box
2. Select the query type (LED status query start or LED status query stop), and thetarget rack/shelf.
3. Click OK. The Batch Operation Result is displayed, indicating the query result.
4. Click OK.
5. In RACK tab, move the mouse to a board, the LED status of this board will bedisplayed.
End of Steps
2-3
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
2.3 Querying or Synchronizing NTP TimeIf a resource is not operating properly, you can query or synchronize the Network TimeProtocol (NTP) clock on the corresponding board to check whether the fault is caused byabnormal clock.
Prerequisite
The NMS operates properly.
The NE is connected to the NMS properly.
Steps
1. On the toolbar, click . TheNTP time operation dialog box is displayed, see Figure2-4.
Figure 2-4 NTP Time Operation Dialog Box
2. Select an option.
a. Select NTP time query, and click OK. The Operation result dialog box isdisplayed, indicating the query is successful..
b. Select NTP time synchronization, and click OK. The Operation result dialogbox is displayed, indicating the synchronization is successful.
End of Steps
2.4 Performing FTP User OperationsThis procedure describes how to add, delete, and query FTP users.
Steps
1. On the toolbar, click . The FTP User Operation dialog box is displayed, see Figure2-5.
2-4
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 2 Basic Operations
Figure 2-5 FTP User Operation Dialog Box (1)
2. Select FTP user query or FTP user synchronization.
3. Click OK.
End of Steps
2.5 Exporting Data to an EXCEL File
Steps
1. Expand the root node, and double-click a managed object node.
2. Select a data record.
3. On the tool bar of managed object tab, click .
4. Select a path to save the file, and click OK.
End of Steps
2.6 Refreshing the Status of a Managed Object
Steps
1. Expand the root node, and double-click a managed object node.
2. Select a data record.
3. On the tool bar of the managed object tab, click .
End of Steps
2-5
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
2.7 Rebooting the Entire SystemThis procedure describes how to reboot the entire iBSC system.
Steps
1. On the toolbar of the right pane, click . The Confirmation dialog box is displayed,see Figure 2-6.
Figure 2-6 Confirmation Dialog Box
2. Enter the verification code and then click OK, the System Reboot dialog box isdisplayed. Choose the OMP, RPU or SBCX, if you want to reboot them when thewhole system is rebooted.
Figure 2-7 System Reboot dialog box
3. Click OK.The entire iBSC system is rebooted.
End of Steps
2.8 Querying RNC StateThis procedure describes how to query the RNC state.
2-6
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 2 Basic Operations
Steps
1. On the tool bar of managed object tab, click . The RNC State dialog box isdisplayed.
2. Click OK. The Query RNC State dialog box is displayed.
End of Steps
2.9 Querying IMSI Local Switch
Steps
1. On the tool bar of managed object tab, click . The IMSI Local Switch Query dialogbox is displayed, see Figure 2-8.
Figure 2-8 IMSI Local Switch Query Dialog Box
2. Enter a 15-bit IMSI number.
3. Click OK.
End of Steps
2-7
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
This page intentionally left blank.
2-8
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 3Physical ResourcesTable of Contents
Viewing Controller Rack Information...........................................................................3-1Board .........................................................................................................................3-2Physical CPU .............................................................................................................3-3Unit ............................................................................................................................3-3CPU Subunit ..............................................................................................................3-4Managing Logical E1 Ports.........................................................................................3-4Managing Logical E3 Ports.........................................................................................3-4Managing Logical T3 Ports.........................................................................................3-5Managing Logical Ethernet Ports................................................................................3-5Managing Logical POS Ports......................................................................................3-5Managing DSP Subunits ............................................................................................3-5Slave Subunit .............................................................................................................3-6STM-1 physical port ...................................................................................................3-6Managing Physical STM-4 Ports.................................................................................3-7Ethernet physical port.................................................................................................3-7
3.1 Viewing Controller Rack Information
Prerequisite
At least one controller rack is created.
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >Controller Rack. The Controller Rack tab is displayed, see Figure 3-1.
3-1
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
Figure 3-1 Controller Rack Tab
2. Double-click the rack record, the RACK tab is displayed.
3. View the information displayed in the tab.
End of Steps
3.2 Board
3.2.1 Querying Time
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >Board. The Board tab is displayed.
2. Select a record.
3. Right-click the selected record, and select Time Query.
4. View the result.
End of Steps
3.2.2 Querying Disk Space
Steps
Note:
This function is supported by OMP boards.
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >Board. The Board tab is displayed.
3-2
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 3 Physical Resources
2. Select a record.
3. Right-click the selected record, and select Disk query.
4. View the result.
End of Steps
3.3 Physical CPU
3.3.1 Querying CPU Usage
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >Physics CPU. The Physics CPU tab is displayed.
2. Select one ore more records.
3. Right-click the selected record, and select CPU userate query.
4. View the result.
End of Steps
3.3.2 Querying Memory Usage
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >Physics CPU. The Physics CPU tab is displayed.
2. Select one or more records.
3. Right-click the selected record, and select Memory userate query.
4. View the result.
End of Steps
3.4 Unit
3.4.1 Querying Unit State
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >Unit. The Unit tab is displayed.
2. Select one or more records.
3. Right-click the selected record, and select Unit state query.
3-3
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
4. View the result that is displayed in the Unit state column.
End of Steps
3.5 CPU Subunit
3.5.1 Querying Subunit State
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >CpuSunit. The CpuSunit tab is displayed.
2. Select a record.
3. Right-click the selected record, and select Sunit state query.
4. View the result.
End of Steps
3.6 Managing Logical E1 Ports
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >LogicalE1. The LogicalE1 tab is displayed.
2. Select a record.
3. Right-click the selected record, and select Sunit state query, Sunit block, or Sunitunblock.
End of Steps
3.7 Managing Logical E3 PortsThis procedure describes how to manage logical E3 ports.
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >LogicalE3 Port. The LogicalE3 Port tab is displayed.
2. Select one or more records.
3. Right-click the selected record, and select Sunit state query, Sunit block, or Sunitunblock.
End of Steps
3-4
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 3 Physical Resources
3.8 Managing Logical T3 PortsThis procedure describes how to manage logical T3 ports.
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >LogicalT3 Port. The LogicalT3 Port tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Sunit state query, Sunit block, or Sunitunblock.
End of Steps
3.9 Managing Logical Ethernet PortsFor the operations on the logical Ethernet unit, refer to the operations on the CPU subunit.
3.10 Managing Logical POS PortsThis procedure describes how to manage logical POS ports.
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >LogicalPos Port. The LogicalPos Port tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Sunit state query, Sunit block, or Sunitunblock.
End of Steps
3.11 Managing DSP SubunitsThis procedure describes how to manage DSP Subunits.
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >DspSunit. The DspSunit tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Sunit state query, Sunit block, or Sunitunblock.
End of Steps
3-5
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
3.12 Slave Subunit
3.12.1 Querying Slave Subunit State
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >UpSlaveSunit. The UpSlaveSunit tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Sunit state query.
4. View the result in the Sunit State column.
End of Steps
3.12.2 Blocking Subunits
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >UpSlaveSunit. The UpSlaveSunit tab is displayed.
2. Select one or more records.
3. Right-click the selected record, and select Sunit block.
End of Steps
3.12.3 Unblocking Subunits
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >UpSlaveSunit. The UpSlaveSunit tab is displayed.
2. Select one or more records.
3. Right-click the selected record, and select Sunit unblock.
End of Steps
3.13 STM-1 physical port
3.13.1 Querying Fiber Port Status
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >STM-1 physical port. The STM-1 physical port tab is displayed.
3-6
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 3 Physical Resources
2. Select one or more records.
3. Right-click the selected record, and select Query fiber port status.
End of Steps
3.13.2 Turning on Fiber Port
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >STM-1 physical port. The STM-1 physical port tab is displayed.
2. Select one or more records.
3. Right-click the selected record, and select Turn on fiber port.
End of Steps
3.13.3 Turning off Fiber Port
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >STM-1 physical port. The STM-1 physical port tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Turn off fiber port.
End of Steps
3.14 Managing Physical STM-4 PortsFor the operations on the physical STM-4 ports, refer to the operations on the physicalSTM-1 ports.
3.15 Ethernet physical port
3.15.1 Querying External Port Status
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >Ethernet physical port. The Ethernet physical port tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Query out port status.
End of Steps
3-7
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
3.15.2 Turning on External Ports
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >Ethernet physical port. The Ethernet physical port tab is displayed.
2. Select one or more records.
3. Right-click the selected record, and select Turn on out port.
End of Steps
3.15.3 Turning off External Ports
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > Physical Resource >Ethernet physical port. The Ethernet physical port tab is displayed.
2. Select one or more records.
3. Right-click the selected record, and select Turn off out port.
End of Steps
3-8
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 4Transmission ResourcesTable of Contents
Association.................................................................................................................4-1Querying AS State......................................................................................................4-3ASP ...........................................................................................................................4-3Signalling Link ............................................................................................................4-5Signalling Linkset .......................................................................................................4-7SSCOP Link...............................................................................................................4-8Remote Signaling Point ..............................................................................................4-8Blocking/Unblocking Local SSN Subsystem ...............................................................4-9Querying Valid Band of Transport Paths .....................................................................4-9Querying Valid Band of Transport Path Groups ..........................................................4-9Querying DHCP Client Configuration Status...............................................................4-9
4.1 Association
4.1.1 Establishing Associations
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sctp Association. The Sctp Association tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Establish.
End of Steps
4.1.2 Shutting Down Associations
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sctp Association. The Sctp Association tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Shutdown.
End of Steps
4-1
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
4.1.3 Aborting Associations
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sctp Association. The Sctp Association tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Abort.
End of Steps
4.1.4 Establishing All Associations (M3UA)
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sctp Association. The Sctp Association tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Establish all (M3UA).
End of Steps
4.1.5 Shutting Down All Associations (M3UA)
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sctp Association. The Sctp Association tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Shutting down all (M3UA).
End of Steps
4.1.6 Aborting All Associations (M3UA)
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sctp Association. The Sctp Association tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Abort all(M3UA).
End of Steps
4-2
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 4 Transmission Resources
4.1.7 Querying SCTP Association State
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sctp Association. The Sctp Association tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select SCTP association query.
End of Steps
4.2 Querying AS StateSteps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> AS. The AS tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select AS state request. The result is displayedin the Query result column.
End of Steps
4.3 ASP
4.3.1 Querying ASP State
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> ASP. The ASP tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and selectASP state request. The result is displayedin the Query result column.
End of Steps
4.3.2 Enabling ASP
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> M3UA ASP. The M3UA ASP tab is displayed.
2. Select one or several records.
4-3
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
3. Right-click the selected records, and select ASP up. The result is displayed in theUp/Down Operation Result column.
End of Steps
4.3.3 Disabling ASP
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> M3UA ASP. The M3UA ASP tab is displayed.
2. Select one or several records.
3. Right-click the selected records, and select ASP down. The result is displayed in theUp/Down Operation Result column.
End of Steps
4.3.4 Activating ASP
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> M3UA ASP. The M3UA ASP tab is displayed.
2. Select one or several records.
3. Right-click the selected records, and select ASP active. The result is displayed in theActive/Inactive Operation Result column.
End of Steps
4.3.5 Inactivating ASP
Prerequisite
The M3UA ASP tab is displayed.
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> M3UA ASP. The M3UA ASP tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select ASP inactive. The result is displayed inthe Active/Inactive Operation Result column.
End of Steps
4-4
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 4 Transmission Resources
4.4 Signalling Link
4.4.1 Querying MTP3 Link Status
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sl. The Sl tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select To query the status of MTP3 link. Theresult is displayed in the MTP3 link status column.
End of Steps
4.4.2 Querying SNM Link Status
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sl. The Sl tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select To query the status of SNM link. Theresult is displayed in the SNM link status column.
End of Steps
4.4.3 Querying the Current Load of MTP3 Link
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sl. The Sl tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select To query the current load of MTP3 link.
End of Steps
4.4.4 Inhibiting MTP3 Link
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sl. The Sl tab is displayed.
2. Select one or more records.
4-5
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
3. Right-click the selected records, and select To inhibit MTP3 link
End of Steps
4.4.5 Uninhibiting MTP3 Link
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sl. The Sl tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select To uninhibit MTP3 link.
4. In the displayed dialog box, click OK.
End of Steps
4.4.6 Activating MTP3 Link
Context
This task is performed for test or transmission detection and maintenance. After relevantoperations are performed, the link needs to be activated to ensure normal load sharing ofthe service. If the link is activated successfully, it changes to service status and can carryservice messages properly.
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Signalling Link. The Signalling Link tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select To activate MTP3 link
4. Click OK.
End of Steps
4.4.7 Deactivating MTP3 Links
Context
This task is performed for test or transmission detection and maintenance. It avoids packetlosses that are caused because services are routed to this link. In this case, this link is inout-of-service status. The link is disconnected and does not carry any service message.
4-6
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 4 Transmission Resources
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sl. The Sl tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select To deactivate MTP3 link. A dialog box isdisplayed.
4. Click OK.
End of Steps
4.4.8 Starting Spying SNM Links
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sl. The Sl tab is displayed.
2. Select one or several records.
3. Right-click the selected records, and select Start spying SNM link.
End of Steps
4.4.9 Stopping Spying SNM Links
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sl. The Sl tab is displayed.
2. Select one or several records.
3. Right-click the selected records, and select Stop spying SNM link.
End of Steps
4.5 Signalling Linkset
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> Sls. The Sls tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select To query the status of MTP3 linkset.The result is displayed in the Query result column.
End of Steps
4-7
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
4.6 SSCOP Link
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> SaalTp. The SaalTp tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select To query the status of SSCOP link. Theresult is displayed in the Sscop link status column.
End of Steps
4.7 Remote Signaling Point
4.7.1 Querying Status of Remote Office
Prerequisite
The signaling link group has been established.
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> RemoteSp. The RemoteSp tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select To query the status of office. The resultis displayed in the Adjoining office status column.
End of Steps
4.7.2 Querying the Current Load of Remote MTP3 Link
Steps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> RemoteSp. The RemoteSp tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select To query the current load of MTP3 link.The result is displayed in the Current load column.
End of Steps
4-8
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 4 Transmission Resources
4.8 Blocking/Unblocking Local SSN SubsystemSteps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> LocalSSn. The LocalSSn tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Block or Unblock.
End of Steps
4.9 Querying Valid Band of Transport PathsSteps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> TrPath. The TrPath tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Transport Path Valid Band Query.
End of Steps
4.10 Querying Valid Band of Transport Path GroupsSteps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> TrPathGroup. The TrPathGroup tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Transport Path Group Band Query.
End of Steps
4.11 Querying DHCP Client Configuration StatusSteps
1. SelectRoot Node >GERANSubnetwork >ManagedNE > Transmission Resource> DHCPCLIENT. The DHCPCLIENT tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select DHCP Client Configuration StatusQuery.
End of Steps
4-9
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
This page intentionally left blank.
4-10
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 5GSM Radio ResourcesTable of Contents
PCM at Interface A.....................................................................................................5-1Trunk at Interface A....................................................................................................5-3Resetting Circuit at Interface A ...................................................................................5-5PCM at Virtual Interface A ..........................................................................................5-5Trunk at Virtual Interface A .........................................................................................5-6Operating ATER PCM ................................................................................................5-7Time Slot at Interface Ater ..........................................................................................5-7Resetting ITC Office ...................................................................................................5-7MSC Office.................................................................................................................5-8Slave Subunit (GSM)................................................................................................5-10NSVC.......................................................................................................................5-10SGSN Office.............................................................................................................5-11Querying Local End Status.......................................................................................5-12Querying Peer End Status........................................................................................5-12NSE .........................................................................................................................5-13BTS..........................................................................................................................5-14Frequency ................................................................................................................5-15Time Slot..................................................................................................................5-17GSM Module ............................................................................................................5-20BVC .........................................................................................................................5-21ABIS.........................................................................................................................5-22Querying Time Slot Usage at Interface Abis .............................................................5-24Querying Abis Device Status ....................................................................................5-24GSITE ......................................................................................................................5-24Resetting Site Rack..................................................................................................5-24Querying Ring Network Status .................................................................................5-26LAPD CPU...............................................................................................................5-27
5.1 PCM at Interface A
5.1.1 Querying PCM Status at Interface A
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> GATRUNKPCM. The GATRUNKPCM tab is displayed.
5-1
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
2. Select a record.
3. Right-click the selected records, and select Query A Interface PCM.
End of Steps
5.1.2 Blocking PCM at Interface A
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> GATRUNKPCM. The GATRUNKPCM tab is displayed.
2. Select a record.
3. Right-click the selected records, and select Block A Interface PCM. A dialog box isdisplayed.
4. Click OK.
End of Steps
5.1.3 Unblocking PCM at Interface A
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> GATRUNKPCM. The GATRUNKPCM tab is displayed.
2. Select a record.
3. Right-click the selected records, and select Unblock A Interface PCM. A dialog boxis displayed.
4. Click OK.
End of Steps
5.1.4 Equipping PCM at Interface A
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> GATRUNKPCM. The GATRUNKPCM tab is displayed.
2. Select a record.
3. Right-click the selected records, and select Equip A Interface PCM. A dialog box isdisplayed.
4. Click OK.
End of Steps
5-2
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 5 GSM Radio Resources
5.1.5 Un-equipping PCM at Interface A
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> GATRUNKPCM. The GATRUNKPCM tab is displayed.
2. Select a record.
3. Right-click the selected records, and select Un equip A Interface PCM. A dialog boxis displayed.
4. Click OK.
End of Steps
5.2 Trunk at Interface A
5.2.1 Querying Trunk Status at Interface A
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> GATRUNKTS. The GATRUNKTS tab is displayed.
2. Select a record.
3. Right-click the selected records, and select Query A Trunk Status.
End of Steps
5.2.2 Blocking the Trunk at Interface A
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> GATRUNKTS. The GATRUNKTS tab is displayed.
2. Select a record.
3. Right-click the selected records, and select BLK ATRUNK.
4. You can perform the following operations:
Operation Result
Block and release The trunk is blocked forcibly, and the services at interface
A are released.
Block and no release The trunk is blocked after handover, and the services at
interface A are not released.
End of Steps
5-3
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
5.2.3 Unblocking the Trunk at Interface A
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> GATRUNKTS. The GATRUNKTS tab is displayed.
2. Select a record.
3. Right-click the selected records, and select Unblock A TRUNK. A dialog box isdisplayed.
4. Click OK.
End of Steps
5.2.4 Spying the Trunk at Interface A
Context
The task feeds back the status changing of the monitored objects to users.
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> GATRUNKTS. The GATRUNKTS tab is displayed.
2. Select a record.
3. Right-click the selected records, and select Spy A TRUNK.
4. Click OK. The other records that have the same PCM No. with the selected recordsare also spied.
End of Steps
5.2.5 Stopping Trunk Spy at Interface A
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> GATRUNKTS. The GATRUNKTS tab is displayed.
2. Select a record.
3. Right-click the selected records, and select Stop spying A TRUNK.
4. ClickOK. The spy on the other records that have the same PCM No. with the selectedrecords also stops.
End of Steps
5-4
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 5 GSM Radio Resources
5.3 Resetting Circuit at Interface ASteps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> ACIRC. The ACIRC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and selectReset A Circuit. A dialog box is displayed.
4. Click OK.
End of Steps
5.4 PCM at Virtual Interface A
5.4.1 Querying PCM Status at Virtual Interface A
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> ARESPCM. The ARESPCM tab is displayed.
2. Select a record.
3. Right-click the selected records, and select QRY ARESPCM.
End of Steps
5.4.2 Blocking PCM at Virtual Interface A
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> ARESPCM. The ARESPCM tab is displayed.
2. Select a record.
3. Right-click the selected records, and select BLK ARESPCM.
End of Steps
5.4.3 Ubblocking PCM at Virtual Interface A
Prerequisite
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> ARESPCM. The ARESPCM tab is displayed.
5-5
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
2. Select a record.
3. Right-click the selected records, and select UNBLK ARESPCM.
End of Steps
5.4.4 Equipping PCM at Virtual Interface A
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> ARESPCM. The ARESPCM tab is displayed.
2. Select a record.
3. Right-click the selected records, and select EQP ARESPCM.
End of Steps
5.5 Trunk at Virtual Interface A
5.5.1 Querying Remote Trunk Status at Interface AFor the operations on the remote trunk, refer to the related operations on the trunk atinterface A.
5.5.2 Blocking the Remote Trunk at Interface A
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> ARESTRUNK. The ARESTRUNK tab is displayed.
2. Select a record.
3. Right-click the selected records, and select Block Ares Interface Trunk.
4. Select a block type.
5. Click OK.
End of Steps
5.5.3 Unblocking Remote Trunk at Interface AFor the operations on the remote trunk, refer to the related operations on the trunk atinterface A.
5-6
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 5 GSM Radio Resources
5.6 Operating ATER PCMFor the operations on PCM at interface ATER, refer to the operations on PCM at interfaceA.
5.7 Time Slot at Interface Ater
5.7.1 Querying Trunk Status at Ater Interface
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> ATERTRUNK. The ATERTRUNK tab is displayed.
2. Select a record.
3. Right-click the selected records, and select QRY ATERATRUNK.
End of Steps
5.7.2 Blocking Time Slot at Interface Ater and Releasing CircuitFor the operations on a time slot at Interface Ater, refer to the related operations on thetime slot at interface A.
5.7.3 Blocking Time Slot at Interface Ater and Not Releasing CircuitFor the operations on a time slot at Interface Ater, refer to the related operations on thetime slot at interface A.
5.7.4 Unblocking Trunk at Interface Ater
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> ATERTRUNK. The ATERTRUNK tab is displayed.
2. Select a record.
3. Right-click the selected records, and select UNB ATERATRUNK.
End of Steps
5.8 Resetting ITC OfficeSteps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> ITC. The ITC tab is displayed.
5-7
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
2. Select one or more records.
3. Right-click the selected records, and select RST TC.
End of Steps
5.9 MSC Office
5.9.1 Querying MSC Status
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> MSC. The MSC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Query MSC Officesel Status.
End of Steps
5.9.2 Using MSC
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> MSC. The MSC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Use MSC Officesel.
End of Steps
5.9.3 UNLD MSC
Context
The MSCs in unload status do not accept initial MS access requests.
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> MSC. The MSC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Unload MSC Officesel.
End of Steps
5-8
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 5 GSM Radio Resources
5.9.4 Disabling MSC Office
Context
When an MSC is disabled, the messages sent to this MSC perform the load reallocation.
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> MSC. The MSC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Un use MSC Officesel.
End of Steps
5.9.5 Resetting MSC Office
Context
When an MSC office is reset, the corresponding BSC releases the services and informsthe MSC.
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> MSC. The MSC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Reset MSC.
End of Steps
5.9.6 Resetting IP Resources
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> MSC. The MSC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Reset IP Resource.
End of Steps
5-9
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
5.10 Slave Subunit (GSM)
Display the Slave Subunit (GSM) tab
The Slave Subunit (GSM) tab can be opened by the step in the Sataus Management tabas fellow:
Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource >Slave Sunit (GSM). The Slave Sunit (GSM) tab is displayed.
Operations
Select one or more records, Right-click the selected records, some operations can beselected as fellow:
l Query IPA Statusl Block IPAl Unblock IPAl Query Cell in Slavel Adjust Cell in Slave
5.11 NSVC
5.11.1 Querying NSVC Status
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> NSVC. The NSVC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Query NSVC Status.
End of Steps
5.11.2 Blocking NSVC
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> NSVC. The NSVC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Block NSVC.
End of Steps
5-10
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 5 GSM Radio Resources
5.11.3 Unblocking NSVC
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> NSVC. The NSVC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Unblock NSVC.
End of Steps
5.11.4 Resetting NSVC
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> NSVC. The NSVC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Reset NSVC.
End of Steps
5.12 SGSN Office
5.12.1 Querying SGSN Status
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> SGSN. The SGSN tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Query SGSN Status.
End of Steps
5.12.2 Enabling SGSN
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> SGSN. The SGSN tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Use SGSN.
End of Steps
5-11
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
5.12.3 Disabling SGSN
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> SGSN. The SGSN tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Unuse SGSN.
End of Steps
5.12.4 Unloading SGSN
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> SGSN. The SGSN tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Unload SGSN.
End of Steps
5.13 Querying Local End Status
Steps
1. Select one or several records.
2. Right-click the selected record(s), and select the command to execute the local endstatus query.
End of Steps
5.14 Querying Peer End Status
Steps
1. Select one or several records.
2. Right-click the selected record(s), and select the command to execute the peer endstatus query.
End of Steps
5-12
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 5 GSM Radio Resources
5.15 NSE
5.15.1 Querying NSE Status
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> NSE. The NSE tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Query NSE Status.
End of Steps
5.15.2 Configuring Remote IP and Port of NSE
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> NSE. The NSE tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Reconfigure all NSE.
End of Steps
5.15.3 Re-configuring Incremental NSE
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> NSE. The NSE tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Reconfigure add NSE.
End of Steps
5.15.4 Querying Dynamic Endpoint Status
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> NSE. The NSE tab is displayed.
2. Select one or several records.
3. Right-click the selected records, and select Query Dynamic Endpoint Status.
End of Steps
5-13
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
5.16 BTSDisplay the BTS tab
The BTS tab can be opened by the step in the Sataus Management tab as fellow:
Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource >BTS. The BTS tab is displayed.
Operations
Select one or more records, Right-click the selected records, some operations can beselected as fellow:
l Query Cell Statusl Block Celll Unblock Celll Query Slave of PS Celll Change Cell to Slavel Cell Load Adjustment of PCU Resource in Globall Cell Load Adjustment of PCU Resource in PLMNl Query Channel Statistics in Celll Query Cell BCCH Powerl Query Relation Between TRX and RRUl Query Up Inter Bandl Query BAList
Block Cell
1. Select one or more records, Right-click the selected records, and select Block Cell.A dialog box is displayed, see Figure 5-1.
Figure 5-1 Blocking Cells
2. Perform the following operations as needed:
5-14
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 5 GSM Radio Resources
Operation Result
Click Force Block. The cell is blocked and the service is released.
Click Switch Off Block. The cell is blocked after the service is handed
over to other cells.
Click Release Block. The cell is actually blocked after there is no
service in the cell.
5.17 Frequency
5.17.1 Querying TRX Status
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TRX. The TRX tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Query TRX Status.
End of Steps
5.17.2 Blocking FU TRX
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TRX. The TRX tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Block FU TRX.
4. Perform the following operations as needed:
Operation Result
Click Force Block. The FU (Frame Unit) is blocked and the service
is released.
Click Switch Off Block. The FU is blocked after the service is switched to
other carriers.
Click Release Block. The FU is actually blocked after there is no
service.
End of Steps
5-15
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
5.17.3 Unblocking FU TRX
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TRX. The TRX tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Unblock FU TRX.
End of Steps
5.17.4 Blocking CU TRX
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TRX. The TRX tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Block CU TRX.
4. Perform the following operations as needed:
Operation Result
Click Force Block. The CU (carrier unit) is blocked and the service
is released.
Click Switch Off Block. The CU is blocked after the service is switched to
other carriers.
Click Release Block. The CU is actually blocked after there is no
service.
End of Steps
5.17.5 Unblocking CU TRX
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TRX. The TRX tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Unblock CU TRX
End of Steps
5-16
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 5 GSM Radio Resources
5.17.6 Query Relation Between TRX and RRU
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TRX. The TRX tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Query Relation Between TRX and RRU.
End of Steps
5.17.7 Query Up Inter Band
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TRX. The TRX tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Query Up Inter Band.
End of Steps
5.18 Time Slot
5.18.1 Querying TS Status
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TS. The TS tab is displayed.
2. Select a record.
3. Right-click the selected records, and select Query TS Status.
End of Steps
5.18.2 Querying TS Channel Status
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TS. The TS tab is displayed.
2. Select a record.
3. Right-click the selected records, and select Query TS Channel Status.
End of Steps
5-17
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
5.18.3 Blocking TS
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TS. The TS tab is displayed.
2. Select a record.
3. Right-click the selected records, and select Block TS.
4. Perform the following operations as needed:
Operation Result
Click Force Block. The TS is blocked and the service is released.
Click Switch Off Block. The TS is blocked after the service is switched to
other carriers.
Click Release Block. The TS is actually blocked after there is no
service.
5. Click OK.
End of Steps
5.18.4 Unblocking TS
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TS. The TS tab is displayed.
2. Select a record.
3. Right-click the selected records, and select Unblock TS.
End of Steps
5.18.5 Force Handing-Over TS
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TS. The TS tab is displayed.
2. Select a record.
3. Right-click the selected records, and select Force Handover TS.
4. Select the handover type, and fill in the site ID and BTS ID.
5. Click OK.
5-18
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 5 GSM Radio Resources
6. Click OK to close the message box.
End of Steps
5.18.6 Querying Connect Status by TS
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TS. The TS tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Query Connect Status by TS.
4. Click OK to close the message box.
End of Steps
5.18.7 Querying Connect Status by IMSI
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TS. The TS tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Query Connect by IMSI.
4. Enter the IMSI to be queried.
5. Click OK.
6. Click OK to close the message box.
End of Steps
5.18.8 Spying the Status of a Channel
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TS. The TS tab is displayed.
2. Select a record.
3. Right-click the selected records, and select SPY TRX.
End of Steps
5-19
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
5.18.9 Stopping the Channel Spy
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> TS. The TS tab is displayed.
2. Select a record.
3. Right-click the selected records, and select STP TRXSPY.
End of Steps
5.19 GSM Module
5.19.1 Querying Channels in GMODULE
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> GMODULE. The GMODULE tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Query Channel Statistics in Module.
End of Steps
5.19.2 Quitting Stream Control
Context
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> GMODULE. The GMODULE tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Stop Flow Control.
4. Click Close.
End of Steps
5.19.3 Adjusting Cell Loads in Module
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> GMODULE. The GMODULE tab is displayed.
5-20
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 5 GSM Radio Resources
2. Select one or several records.
3. Right-click the selected records, and select ADJUST RUPSLAVEINMODULE.
4. Click Yes.
End of Steps
5.20 BVC
5.20.1 Querying BVC Status
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> BVC. The BVC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Query BVC Status.
End of Steps
5.20.2 Blocking BVC
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> BVC. The BVC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Block BVC.
End of Steps
5.20.3 Unblocking BVC
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> BVC. The BVC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Unblock BVC.
End of Steps
5-21
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
ZXG10 iBSC Status Management Operation Guide
5.20.4 Resetting BVC
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> BVC. The BVC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Reset BVC.
End of Steps
5.20.5 Resetting Signalling
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> BVC. The BVC tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Signalling Reset BVC.
End of Steps
5.21 ABIS
5.21.1 Querying Time Slot Status at Interface Abis
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> ABIS. The ABIS tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select Query ABIS Status.
End of Steps
5.21.2 Blocking Time Slot at Interface Abis
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE > GSM Radio Resource> ABIS. The ABIS tab is displayed.
2. Select one or more records.
3. Right-click the selected records, and select BLOCK ABIS.
4. Perform the following operations as needed:
5-22
SJ-20130408113951-023|2013-06-05(R1.0) ZTE Proprietary and Confidential
-
Chapter 5 GSM Radio Resources
Operation Result
Click Block and Release. The time slots at interface Abis are blocked and
the service is released.
Click Block and No Release. The time slots at interface Abis are blocked and
the service is not released.
End of Steps
5.21.3 Unblocking Time Slots at Interface Abis
Steps
1. Select Root Node > GERAN Subnetwork > Managed NE &g