Vic ring 16.12
8
12 – 24"/300 – 600 MM SIZES 26 – 62"/650 – 1550 MM SIZES PATENTED The patented Style W77 AGS (Advanced Groove System) coupling is comprised of two housings and is designed to provide a strong connection for large diameter pressure piping systems. Its unique wedge-shaped key results in easier initial assembly alignment. The Style W77 AGS coupling in 26 – 62"/660 – 1550 mm sizes, features lifting lugs integrated into the housings to help ease handling during installation. The Style W77 coupling is mounted onto an external ring utilizing a patented AGS groove pro- file. The Vic-ring system provided by Vi ctaulic maintains full pipe wall thickness for slurries, tailings, and a variety of other services. Style W77 AGS couplings are rated up to 350 ps i/2400 kPa for 14 – 24"/350 – 60 0 mm, up to 300 psi/2065 kPa for 26 – 44"/650 – 1100 mm, to 232 psi/1600 kPa for 46 – 50"/1150 – 1250 mm piping systems and to 175 psi/1200 kPa for 54 – 62"/1350 – 1550 mm. Style W77 AGS couplings provide limited linear and angular pipe movement at the pipe joint that can be used to compensate for thermal growth of piping systems, vibration attenuation, seismic, and other applications requiring flexibility. Support and hanging requirements are defined within Victaulic Design Data Submittal 26 .01. Style W77 AGS couplings are provided with FlushSeal ® gaskets for a variety of ser vices. Please specify gasket grade when ordering. Please refer to publication 05.01 for gasket service ratings. Rigid couplings for Vic-Ring systems are also available. Refer to publication 16.11. WARNING • Victaulic AGS coupli ngs MUST ONLY be installed on AGS Vic-ri ng systems provided by Victaulic. Failure to follow these instructions will cause grooves that are not within Victaulic AGS specifi- cations, resulting in joint failure, serious personal injury, and property damage. WARNING Pipe OD Requirements* Nominal Pipe Size Maximum Pipe OD In. / mm In. / mm 12 300 12.88 327 14 350 14.14 359 16 400 16.16 410 18 450 18.18 462 20 500 20.20 513 24 600 24.25 616 26 – 62 650 – 1550 Nominal Pipe Size + 0.250" /6.4mm * For pipe exceeding these values contact Victaulic. 16.12_1 AGS Vic-Ring ® Systems STYLE W77- Flexible Coupling PATENTED 16.12 CARBON STEEL PIPE – COUPLINGS FOR VIC-RING SYSTEMS JOB/OWNER CONTRACTOR ENGINEER Syste m No. _____ Submitted By __ _______ _______ Spec Sect _____ Para Location __________ _______ _______ ____ Date _______ _______ _______ _______ ____ Appro ved _______ _______ _______ ______ Date ________________________________ www.victaulic.com VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2013 VICTAULIC COMPANY. ALL RIGHTS RESERVED. REV_H
-
Upload
ricardodelatorre -
Category
Documents
-
view
231 -
download
0
Transcript of Vic ring 16.12
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 17
12 ndash 24300 ndash 600 MM SIZES
26 ndash 62650 ndash 1550 MM SIZES PATENTED
The patented Style W77 AGS (Advanced Groove System) coupling is comprised of two
housings and is designed to provide a strong connection for large diameter pressure piping
systems Its unique wedge-shaped key results in easier initial assembly alignment The Style
W77 AGS coupling in 26 ndash 62660 ndash 1550 mm sizes features lifting lugs integrated into thehousings to help ease handling during installation
The Style W77 coupling is mounted onto an external ring utilizing a patented AGS groove pro-
file The Vic-ring system provided by Victaulic maintains full pipe wall thickness for slurries
tailings and a variety of other services
Style W77 AGS couplings are rated up to 350 psi2400 kPa for 14 ndash 24350 ndash 600 mm up
to 300 psi2065 kPa for 26 ndash 44650 ndash 1100 mm to 232 psi1600 kPa for 46 ndash 501150 ndash
1250 mm piping systems and to 175 psi1200 kPa for 54 ndash 621350 ndash 1550 mm Style W77
AGS couplings provide limited linear and angular pipe movement at the pipe joint that can be
used to compensate for thermal growth of piping systems vibration attenuation seismic and
other applications requiring flexibility Support and hanging requirements are defined within
Victaulic Design Data Submittal 2601
Style W77 AGS couplings are provided with FlushSealreg gaskets for a variety of services
Please specify gasket grade when ordering Please refer to publication 0501 for gasket
service ratings
Rigid couplings for Vic-Ring systems are also available Refer to publication 1611
WARNING
bull Victaulic AGS couplings MUST ONLY be installed on AGS Vic-ring systems provided by
Victaulic
Failure to follow these instructions will cause grooves that are not within Victaulic AGS specifi-
cations resulting in joint failure serious personal injury and property damage
WARNING
Pipe OD Requirements
Nominal Pipe Size Maximum Pipe OD
In mm
In mm
12300
1288327
14350
1414359
16400
1616410
18450
1818462
20
500
2020
513
24600
2425616
26 ndash 62650 ndash 1550
Nominal Pipe Size+ 0250 64mm
For pipe exceeding these values contact Victaulic
1612_1
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
PATENTED
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
JOBOWNER CONTRACTOR ENGINEER
System No __________________________ Submitted By ________________________ Spec Sect ____________ Para __________
Location ____________________________ Date ________________________________ Approved ___________________________
Date ________________________________
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 27
MATERIAL SPECIFICATIONS
Vic-Rings Type D Vic-Rings
bull Material
Carbon Steel to ASTM A 105 or equivalent
Optional ASTM A105N (Specify at time of order)
Other materials available upon request Contact Victaulic for details
Housing Ductile iron conforming to ASTM A-536 grade 65-45-12 Ductile iron conforming to
ASTM A-395 grade 65-45-15 is available upon special request
Housing Coating Orange enamel
bull Optional Hot dipped galvanized and others
Coupling Gasket (specify choice)
bull Grade ldquoErdquo FlushSeal EPDM
EPDM (Green color code) Temperature range ndash30degF to +230degF ndash34degC to +110degC
Recommended for cold and hot water service within the specified temperature range plus a
variety of dilute acids oil-free air and many chemical services UL classified in accordance
with ANSINSF 61 for cold +86degF+30degC and hot +180degF+82degC potable water service NOT
RECOMMENDED FOR PETROLEUM SERVICES
bull Grade ldquoTrdquo FlushSeal nitrileNitrile (Orange color code) Temperature range ndash20degF to +180degFndash29degC to +82degC
Recommended for petroleum products air with oil vapors vegetable and mineral oils within the
specified temperature range Not recommended for hot water services over +150degF+66degC or
for hot dry air over +140degF+60degC
bull Grade ldquoLrdquo FlushSeal silicone
Silicone (Red color code) Temperature range ndash30degF to +350degFndash34deg C to +177deg C
Recommended for dry heat air without hydrocarbons to +350degF+177degC and certain chemical
services
Services listed are General Service Recommendations only It should be noted that there are
services for which these gaskets are not recommended Reference should always be made to
the latest Victaulic Gasket Selection Guide for specific gasket service recommendations and for a
listing of services which are not recommended
Bolts Heat-treated plated carbon steel trackhead meeting the physical and chemical requirements
of ASTM A-449 and physical requirements of ASTM A-183
Nuts Plated carbon steel heavy hex conforming to ASTM A-563 Grade B
Washers Plated carbon steel flat SAE high strength conforming to ASTM F-436
Housing
Gasket
Pipe
Lining (by others)
Ring
1612_2
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 37
DIMENSIONS
Size Max Working Pressure
Max EndLoadLbsN
Allow PipeEnd Sep
Deflect FromCL
BoltNutNo - Size Dimensions ndash Inchesmm
ApproxWgt Each
Nominal Pipe
Size Inchesmm
Coupling
SizeInmm psikPa On Vic-Ring
Inchesmm
Per
CplgDeg
Pipe
InFtmmm Inches X Y Z
CouplingOnly
Lbskg
12 14000 350 53900 013 ndash 031073
0152 ndash 1 x 5 frac12
1600 2063 450 480300 3556 2500 239757 33 ndash 79 13 406 524 114 218
14 16000 350 70400 013 ndash 031063
0132 ndash 1 x 5 frac12
1825 2350 450 580350 4064 2500 313155 33 ndash 79 11 464 597 114 263
16 18000 350 89100 013 ndash 031057
0122 ndash 1 x 5 frac12
2038 2550 450 650400 4572 2500 396335 33 ndash 79 10 517 647 114 295
18 20000 350 109950 013 ndash 031050
0102 ndash 1 983089frasl983096 x 5 frac12
2263 2713 450 820450 5080 2500 489304 33 ndash 79 9 575 689 114 372
20 22000 350 133050 013 ndash 031050
0102 ndash 1 983089frasl983096 x 6
2475 2925 450 990500 5588 2500 592075 33 ndash 79 9 6287 7430 114 449
22 24000 350 158336 013 ndash 031042
0092 ndash 1 983089frasl983096 x 5 frac12
2688 3238 450 1070550 6096 2500 704275 33 ndash 79 8 683 822 114 485
24 26000 300 159279 015-053083
0184 ndash 1 983089frasl983096 x 6
3013 3525 575 2050600 6604 2065 708508 381-1346 15 765 895 146 930
26 28000 300 184726 015-053078
0164 ndash 1 983089frasl983096 x 6
3225 3725 575 2200650 7112 2065 821702 381-1346 14 819 945 146 998
28 30000 300 212058 015-053 073 016 4 ndash 1 frac14 x 7 3388 3963 575 2270700 7620 2065 943281 381-1346 14 863 1007 146 1030
30 32000 300 241274 015-053068
0144 ndash 1 frac14 x 7
3613 4175 575 2420750 8128 2065 1073240 381-1346 11 916 1060 146 1098
32 34000 300 272375 015 - 053069
0134 ndash 1 frac14 x 7
3825 4375 575 2550800 8650 2065 1212070 381 - 1346 11 972 1111 146 1157
34 36000 300 305363 015-053060
0134 ndash 1 frac14 x 7
4025 4575 575 2680850 9144 2065 1358322 381-1346 11 1022 1161 146 1216
36 38000 300 340235 015-053060
0134 ndash 1 frac14 x 7
4125 4800 575 2980900 9652 2065 1513365 381-1346 11 1048 1219 146 1350
38 40000 300 376991 021-059055
0124 ndash 1 frac12 x 7
4400 5050 650 3400950 10160 2065 1676940 533-1499 10 1117 1283 165 1542
40 42000 300 415632 021-059052
0114 ndash 1 frac12 x 8
4600 5250 650 36001000 10668 2065 1848823 533-1499 9 1168 1334 165 1633
42 44000 232 352763 021 - 05905
0104 ndash 1 frac12 x 8
4800 5450 650 39001050 11500 1600 1569795 533 - 1499 8 1219 1384 165 1769
44 46000 232 385561 021-059047
0104 ndash 1 frac12 x 8
5025 5650 650 41501100 11684 1600 1715746 533-1499 8 1277 1435 165 1882
Working Pressure and End Load are total from all internal and external loads based on carbon steel AGS rings installed in accordance with Victaulicspecifications Contact Victaulic for performance on other ring materials
WARNING FOR ONE TIME FIELD TEST ONLY the Maximum Joint Working Pressure may be increased to 1 frac12 times the figures shown
Metric thread size bolts are available (color coded gold) for all coupling sizes upon request Contact Victaulic for details
dagger Allowable Pipe End Separation and Deflection figures show the maximum nominal range of movement available at each joint for AGS roll grooved pipe
These figures are maximums for design and installation purposes these figures should be reduced by 25NOTE The Style W77 AGS Vic-Ring system is available for pipe sizes ranging from 12 - 60300 - 1500 mm The coupling used to join these pipes will always bethe next largest size (ex 12300mm pipe requires the use of 14350 mm coupling) The larger size is needed to allow for the extra outside pipe diameter theAGS ring adds to the pipe
TYPICAL 12 ndash 24 300 ndash 600 mm
X
ZY
TYPICAL 26 ndash 60 660 ndash 1500 mm
ZY
X
ZY
X
TYPICAL 621550 amp 72 1825 mm
1612_3
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 47
DIMENSIONS
Size Max Working Pressure
Max EndLoadLbsN
Allow PipeEnd Sep
Deflect FromCL
BoltNutNo - Size Dimensions ndash Inchesmm
ApproxWgt Each
Nominal Pipe
Size Inchesmm
Coupling
SizeInmm psikPa On Vic-Ring
Inchesmm
Per
CplgDeg
Pipe
InFtmmm Inches X Y Z
CouplingOnly
Lbskg
46 48000 232 419820 021-059045
0104 ndash 1 frac12 x 8
5225 5850 650 42501150 12192 1600 1868199 533-1499 8 1328 1485 165 1928
48 50000 232 455530 028-066043
0094 ndash 1 frac12 x 8
5363 6088 1000 50001200 12700 1600 2026298 711-1676 75 1362 1546 254 2270
52 54000 175 400790 028-066040
0084 ndash 1 frac12 x 7
5900 6513 1000 64801300 13716 1200 1782803 711-1676 7 1499 1655 254 2939
54 56000 175 431030 028-066038
0084 ndash 1 frac12 x 7
6100 6763 1000 67601350 14222 1200 1917317 711-1676 7 1550 1718 254 3066
58 60000 175 494800 028-066036
0084 ndash 1 frac12 x 7
6500 7213 1000 72001450 15240 1200 2201025 711-1676 7 1652 1832 254 3266
60 62000 175 528340 028-066035
0074 ndash 1 frac12 x 7
6728 7363 1000 95601500 15748 1200 2350173 711-1676 6 1709 1870 254 4336
Working Pressure and End Load are total from all internal and external loads based on carbon steel AGS rings installed in accordance with Victaulicspecifications Contact Victaulic for performance on other ring materials
WARNING FOR ONE TIME FIELD TEST ONLY the Maximum Joint Working Pressure may be increased to 1 frac12 times the figures shown
Metric thread size bolts are available (color coded gold) for all coupling sizes upon request Contact Victaulic for detailsdagger Allowable Pipe End Separation and Deflection figures show the maximum nominal range of movement available at each joint for AGS roll grooved pipe
These figures are maximums for design and installation purposes these figures should be reduced by 25NOTE The Style W77 AGS Vic-Ring system is available for pipe sizes ranging from 12 - 60300 - 1500 mm The coupling used to join these pipes will always bethe next largest size (ex 12300mm pipe requires the use of 14350 mm coupling) The larger size is needed to allow for the extra outside pipe diameter theAGS ring adds to the pipe
TYPICAL 12 ndash 24 300 ndash 600 mm
X
ZY
TYPICAL 26 ndash 60 660 ndash 1500 mm
ZY
X
ZY
X
TYPICAL 621550 amp 72 1825 mm
1612_4
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 57
Rubber-Lined Flush Rubber-Lined Overhung
LINING OPTIONS
Flush Overhung
Rubber Lined with Protective Bumper- Flush Rubber Lined with Protective Bumper- Overhung
Rubber-Lined Flush Rubber lined- Overhung
Chromium Carbide Overlay (CCO)- Overhung
UNLINED SERVICES
Suitable for use on abrasive and non-abrasive services
ABRASION SERVICES
ABRASION AND CORROSION SERVICES
1612_5
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 67
ALL SERVICE OPTIONS
Y
L
See weld
note
Flush
Y
L
See weld
note
Overhung
Size AGS Vic-Ring
NominalSize
InmmCoupling Size
Inmm
ODRing SizeInmm
LDaggerInmm
YdaggerInmm
Approx RingWeight Each
Lbskg
12 14000 14000 300 613 - 631 190300 3556 3556 762 1557 - 1603 86
14 16000 16000 300 613 - 631 370350 4064 4064 762 1557 - 1603 168
16 18000 18000 300 613 - 631 410400 4572 4572 762 1557 - 1603 186
18 20000 20000 300 613 - 631 460450 5080 5080 762 1557 - 1603 209
20 22000 22000 300 613 - 631 510500 5588 5588 762 1557 - 1603 231
22 24000 24000 300 613 - 631 560550 6096 6096 762 1557 - 1603 254
24 26000 26000 400 815- 853 810600 6604 6604 1016 2070 - 2167 367
26 28000 28000 400 815- 853 870650 7112 7112 1016 2070 - 2167 395
28 30000 30000 400 815- 853 940700 7620 7620 1016 2070 - 2167 426
30 32000 32000 400 815- 853 1000750 8128 8128 1016 2070 - 2167 484
32 34000 34000 400 821- 859 1070800 8650 8650 1016 2085 - 2182 485
34 36000 36000 400 815- 853 1130850 9144 9144 1016 2070 - 2167 513
36 38000 38000 400 815- 853 1200900 9652 9652 1016 2070 - 2167 544
38 40000 40000 425 871- 909 1330950 10160 10160 1080 2212 - 2309 603
40 42000 42000 425 871- 909 14001000 10668 10668 1080 2212 - 2309 635
42 44000 44000 425 871- 909 14601050 11500 11500 1080 2212 - 2309 662
44 46000 46000 425 871- 909 15201100 11684 11684 1080 2212 - 2309 690
46 48000 48000 425 871- 909 16001150 12192 12192 1080 2212 - 2309 726
48 50000 50000 425 871- 909 18601200 12700 12700 1080 2212 - 2309 844
52 54000 54000 500 1028- 1066 21501300 13716 13716 1270 2611 - 2708 975
54 56000 56000 500 1028- 1066 22301350 14222 14222 1270 2611 - 2708 1012
58 60000 60000 500 1028- 1066 23901450 15240 15240 1270 2611 - 2708 1084
60 62000 62000 500 1028- 1060 27001500 15748 15748 1270 2611 - 2708 1225
Weld Note Minimum recommended weld size is 983091frasl 98309697 mm for 14350 mm and largerstandard and extra heavy pipe For 12300 mm pipe the minimum recommended weldsize is frac1464 mm
dagger For allowable pipe end separation see dimensional table on page 3
Dagger L dimension is from inside face to end of ring for all lined and un-lined configurations
1612_6
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 77
WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details
This product shall be manufactured by Victaulic or to Victaulic specifications All products to be
installed in accordance with current Victaulic installationassembly instructions Victaulic reserves the
right to change product specifications designs and standard equipment without notice and without
incurring obligations
NOTE
Reference should always be made to the Victaulic Field Installation Instructions for the product you
are installing Victaulic Field Installation Instructions are included with each shipment of Victaulic
products for complete installation and assembly data and are available in PDF format on our website
at wwwvictauliccom
INSTALLATION
TORQUE REQUIREMENTSSize Recommended Torque
NominalSize
Inchesmm
ft lbsNbullm
12 14 16 18 250300 350 400 450 340
20 22 24 26 28 375500 550 600 650 700 500
30 32 34 36 38 500750 800 850 900 950 680
40 42 44 46 48 50 54 56 60 62 600100 0 1050 110 0 1150 120 0 1250 1350 140 0 150 0 1550 813
1612
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
For complete contact information visit wwwvictauliccom
1612 6322 REV H UPDATED 062013
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 27
MATERIAL SPECIFICATIONS
Vic-Rings Type D Vic-Rings
bull Material
Carbon Steel to ASTM A 105 or equivalent
Optional ASTM A105N (Specify at time of order)
Other materials available upon request Contact Victaulic for details
Housing Ductile iron conforming to ASTM A-536 grade 65-45-12 Ductile iron conforming to
ASTM A-395 grade 65-45-15 is available upon special request
Housing Coating Orange enamel
bull Optional Hot dipped galvanized and others
Coupling Gasket (specify choice)
bull Grade ldquoErdquo FlushSeal EPDM
EPDM (Green color code) Temperature range ndash30degF to +230degF ndash34degC to +110degC
Recommended for cold and hot water service within the specified temperature range plus a
variety of dilute acids oil-free air and many chemical services UL classified in accordance
with ANSINSF 61 for cold +86degF+30degC and hot +180degF+82degC potable water service NOT
RECOMMENDED FOR PETROLEUM SERVICES
bull Grade ldquoTrdquo FlushSeal nitrileNitrile (Orange color code) Temperature range ndash20degF to +180degFndash29degC to +82degC
Recommended for petroleum products air with oil vapors vegetable and mineral oils within the
specified temperature range Not recommended for hot water services over +150degF+66degC or
for hot dry air over +140degF+60degC
bull Grade ldquoLrdquo FlushSeal silicone
Silicone (Red color code) Temperature range ndash30degF to +350degFndash34deg C to +177deg C
Recommended for dry heat air without hydrocarbons to +350degF+177degC and certain chemical
services
Services listed are General Service Recommendations only It should be noted that there are
services for which these gaskets are not recommended Reference should always be made to
the latest Victaulic Gasket Selection Guide for specific gasket service recommendations and for a
listing of services which are not recommended
Bolts Heat-treated plated carbon steel trackhead meeting the physical and chemical requirements
of ASTM A-449 and physical requirements of ASTM A-183
Nuts Plated carbon steel heavy hex conforming to ASTM A-563 Grade B
Washers Plated carbon steel flat SAE high strength conforming to ASTM F-436
Housing
Gasket
Pipe
Lining (by others)
Ring
1612_2
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 37
DIMENSIONS
Size Max Working Pressure
Max EndLoadLbsN
Allow PipeEnd Sep
Deflect FromCL
BoltNutNo - Size Dimensions ndash Inchesmm
ApproxWgt Each
Nominal Pipe
Size Inchesmm
Coupling
SizeInmm psikPa On Vic-Ring
Inchesmm
Per
CplgDeg
Pipe
InFtmmm Inches X Y Z
CouplingOnly
Lbskg
12 14000 350 53900 013 ndash 031073
0152 ndash 1 x 5 frac12
1600 2063 450 480300 3556 2500 239757 33 ndash 79 13 406 524 114 218
14 16000 350 70400 013 ndash 031063
0132 ndash 1 x 5 frac12
1825 2350 450 580350 4064 2500 313155 33 ndash 79 11 464 597 114 263
16 18000 350 89100 013 ndash 031057
0122 ndash 1 x 5 frac12
2038 2550 450 650400 4572 2500 396335 33 ndash 79 10 517 647 114 295
18 20000 350 109950 013 ndash 031050
0102 ndash 1 983089frasl983096 x 5 frac12
2263 2713 450 820450 5080 2500 489304 33 ndash 79 9 575 689 114 372
20 22000 350 133050 013 ndash 031050
0102 ndash 1 983089frasl983096 x 6
2475 2925 450 990500 5588 2500 592075 33 ndash 79 9 6287 7430 114 449
22 24000 350 158336 013 ndash 031042
0092 ndash 1 983089frasl983096 x 5 frac12
2688 3238 450 1070550 6096 2500 704275 33 ndash 79 8 683 822 114 485
24 26000 300 159279 015-053083
0184 ndash 1 983089frasl983096 x 6
3013 3525 575 2050600 6604 2065 708508 381-1346 15 765 895 146 930
26 28000 300 184726 015-053078
0164 ndash 1 983089frasl983096 x 6
3225 3725 575 2200650 7112 2065 821702 381-1346 14 819 945 146 998
28 30000 300 212058 015-053 073 016 4 ndash 1 frac14 x 7 3388 3963 575 2270700 7620 2065 943281 381-1346 14 863 1007 146 1030
30 32000 300 241274 015-053068
0144 ndash 1 frac14 x 7
3613 4175 575 2420750 8128 2065 1073240 381-1346 11 916 1060 146 1098
32 34000 300 272375 015 - 053069
0134 ndash 1 frac14 x 7
3825 4375 575 2550800 8650 2065 1212070 381 - 1346 11 972 1111 146 1157
34 36000 300 305363 015-053060
0134 ndash 1 frac14 x 7
4025 4575 575 2680850 9144 2065 1358322 381-1346 11 1022 1161 146 1216
36 38000 300 340235 015-053060
0134 ndash 1 frac14 x 7
4125 4800 575 2980900 9652 2065 1513365 381-1346 11 1048 1219 146 1350
38 40000 300 376991 021-059055
0124 ndash 1 frac12 x 7
4400 5050 650 3400950 10160 2065 1676940 533-1499 10 1117 1283 165 1542
40 42000 300 415632 021-059052
0114 ndash 1 frac12 x 8
4600 5250 650 36001000 10668 2065 1848823 533-1499 9 1168 1334 165 1633
42 44000 232 352763 021 - 05905
0104 ndash 1 frac12 x 8
4800 5450 650 39001050 11500 1600 1569795 533 - 1499 8 1219 1384 165 1769
44 46000 232 385561 021-059047
0104 ndash 1 frac12 x 8
5025 5650 650 41501100 11684 1600 1715746 533-1499 8 1277 1435 165 1882
Working Pressure and End Load are total from all internal and external loads based on carbon steel AGS rings installed in accordance with Victaulicspecifications Contact Victaulic for performance on other ring materials
WARNING FOR ONE TIME FIELD TEST ONLY the Maximum Joint Working Pressure may be increased to 1 frac12 times the figures shown
Metric thread size bolts are available (color coded gold) for all coupling sizes upon request Contact Victaulic for details
dagger Allowable Pipe End Separation and Deflection figures show the maximum nominal range of movement available at each joint for AGS roll grooved pipe
These figures are maximums for design and installation purposes these figures should be reduced by 25NOTE The Style W77 AGS Vic-Ring system is available for pipe sizes ranging from 12 - 60300 - 1500 mm The coupling used to join these pipes will always bethe next largest size (ex 12300mm pipe requires the use of 14350 mm coupling) The larger size is needed to allow for the extra outside pipe diameter theAGS ring adds to the pipe
TYPICAL 12 ndash 24 300 ndash 600 mm
X
ZY
TYPICAL 26 ndash 60 660 ndash 1500 mm
ZY
X
ZY
X
TYPICAL 621550 amp 72 1825 mm
1612_3
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 47
DIMENSIONS
Size Max Working Pressure
Max EndLoadLbsN
Allow PipeEnd Sep
Deflect FromCL
BoltNutNo - Size Dimensions ndash Inchesmm
ApproxWgt Each
Nominal Pipe
Size Inchesmm
Coupling
SizeInmm psikPa On Vic-Ring
Inchesmm
Per
CplgDeg
Pipe
InFtmmm Inches X Y Z
CouplingOnly
Lbskg
46 48000 232 419820 021-059045
0104 ndash 1 frac12 x 8
5225 5850 650 42501150 12192 1600 1868199 533-1499 8 1328 1485 165 1928
48 50000 232 455530 028-066043
0094 ndash 1 frac12 x 8
5363 6088 1000 50001200 12700 1600 2026298 711-1676 75 1362 1546 254 2270
52 54000 175 400790 028-066040
0084 ndash 1 frac12 x 7
5900 6513 1000 64801300 13716 1200 1782803 711-1676 7 1499 1655 254 2939
54 56000 175 431030 028-066038
0084 ndash 1 frac12 x 7
6100 6763 1000 67601350 14222 1200 1917317 711-1676 7 1550 1718 254 3066
58 60000 175 494800 028-066036
0084 ndash 1 frac12 x 7
6500 7213 1000 72001450 15240 1200 2201025 711-1676 7 1652 1832 254 3266
60 62000 175 528340 028-066035
0074 ndash 1 frac12 x 7
6728 7363 1000 95601500 15748 1200 2350173 711-1676 6 1709 1870 254 4336
Working Pressure and End Load are total from all internal and external loads based on carbon steel AGS rings installed in accordance with Victaulicspecifications Contact Victaulic for performance on other ring materials
WARNING FOR ONE TIME FIELD TEST ONLY the Maximum Joint Working Pressure may be increased to 1 frac12 times the figures shown
Metric thread size bolts are available (color coded gold) for all coupling sizes upon request Contact Victaulic for detailsdagger Allowable Pipe End Separation and Deflection figures show the maximum nominal range of movement available at each joint for AGS roll grooved pipe
These figures are maximums for design and installation purposes these figures should be reduced by 25NOTE The Style W77 AGS Vic-Ring system is available for pipe sizes ranging from 12 - 60300 - 1500 mm The coupling used to join these pipes will always bethe next largest size (ex 12300mm pipe requires the use of 14350 mm coupling) The larger size is needed to allow for the extra outside pipe diameter theAGS ring adds to the pipe
TYPICAL 12 ndash 24 300 ndash 600 mm
X
ZY
TYPICAL 26 ndash 60 660 ndash 1500 mm
ZY
X
ZY
X
TYPICAL 621550 amp 72 1825 mm
1612_4
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 57
Rubber-Lined Flush Rubber-Lined Overhung
LINING OPTIONS
Flush Overhung
Rubber Lined with Protective Bumper- Flush Rubber Lined with Protective Bumper- Overhung
Rubber-Lined Flush Rubber lined- Overhung
Chromium Carbide Overlay (CCO)- Overhung
UNLINED SERVICES
Suitable for use on abrasive and non-abrasive services
ABRASION SERVICES
ABRASION AND CORROSION SERVICES
1612_5
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 67
ALL SERVICE OPTIONS
Y
L
See weld
note
Flush
Y
L
See weld
note
Overhung
Size AGS Vic-Ring
NominalSize
InmmCoupling Size
Inmm
ODRing SizeInmm
LDaggerInmm
YdaggerInmm
Approx RingWeight Each
Lbskg
12 14000 14000 300 613 - 631 190300 3556 3556 762 1557 - 1603 86
14 16000 16000 300 613 - 631 370350 4064 4064 762 1557 - 1603 168
16 18000 18000 300 613 - 631 410400 4572 4572 762 1557 - 1603 186
18 20000 20000 300 613 - 631 460450 5080 5080 762 1557 - 1603 209
20 22000 22000 300 613 - 631 510500 5588 5588 762 1557 - 1603 231
22 24000 24000 300 613 - 631 560550 6096 6096 762 1557 - 1603 254
24 26000 26000 400 815- 853 810600 6604 6604 1016 2070 - 2167 367
26 28000 28000 400 815- 853 870650 7112 7112 1016 2070 - 2167 395
28 30000 30000 400 815- 853 940700 7620 7620 1016 2070 - 2167 426
30 32000 32000 400 815- 853 1000750 8128 8128 1016 2070 - 2167 484
32 34000 34000 400 821- 859 1070800 8650 8650 1016 2085 - 2182 485
34 36000 36000 400 815- 853 1130850 9144 9144 1016 2070 - 2167 513
36 38000 38000 400 815- 853 1200900 9652 9652 1016 2070 - 2167 544
38 40000 40000 425 871- 909 1330950 10160 10160 1080 2212 - 2309 603
40 42000 42000 425 871- 909 14001000 10668 10668 1080 2212 - 2309 635
42 44000 44000 425 871- 909 14601050 11500 11500 1080 2212 - 2309 662
44 46000 46000 425 871- 909 15201100 11684 11684 1080 2212 - 2309 690
46 48000 48000 425 871- 909 16001150 12192 12192 1080 2212 - 2309 726
48 50000 50000 425 871- 909 18601200 12700 12700 1080 2212 - 2309 844
52 54000 54000 500 1028- 1066 21501300 13716 13716 1270 2611 - 2708 975
54 56000 56000 500 1028- 1066 22301350 14222 14222 1270 2611 - 2708 1012
58 60000 60000 500 1028- 1066 23901450 15240 15240 1270 2611 - 2708 1084
60 62000 62000 500 1028- 1060 27001500 15748 15748 1270 2611 - 2708 1225
Weld Note Minimum recommended weld size is 983091frasl 98309697 mm for 14350 mm and largerstandard and extra heavy pipe For 12300 mm pipe the minimum recommended weldsize is frac1464 mm
dagger For allowable pipe end separation see dimensional table on page 3
Dagger L dimension is from inside face to end of ring for all lined and un-lined configurations
1612_6
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 77
WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details
This product shall be manufactured by Victaulic or to Victaulic specifications All products to be
installed in accordance with current Victaulic installationassembly instructions Victaulic reserves the
right to change product specifications designs and standard equipment without notice and without
incurring obligations
NOTE
Reference should always be made to the Victaulic Field Installation Instructions for the product you
are installing Victaulic Field Installation Instructions are included with each shipment of Victaulic
products for complete installation and assembly data and are available in PDF format on our website
at wwwvictauliccom
INSTALLATION
TORQUE REQUIREMENTSSize Recommended Torque
NominalSize
Inchesmm
ft lbsNbullm
12 14 16 18 250300 350 400 450 340
20 22 24 26 28 375500 550 600 650 700 500
30 32 34 36 38 500750 800 850 900 950 680
40 42 44 46 48 50 54 56 60 62 600100 0 1050 110 0 1150 120 0 1250 1350 140 0 150 0 1550 813
1612
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
For complete contact information visit wwwvictauliccom
1612 6322 REV H UPDATED 062013
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 37
DIMENSIONS
Size Max Working Pressure
Max EndLoadLbsN
Allow PipeEnd Sep
Deflect FromCL
BoltNutNo - Size Dimensions ndash Inchesmm
ApproxWgt Each
Nominal Pipe
Size Inchesmm
Coupling
SizeInmm psikPa On Vic-Ring
Inchesmm
Per
CplgDeg
Pipe
InFtmmm Inches X Y Z
CouplingOnly
Lbskg
12 14000 350 53900 013 ndash 031073
0152 ndash 1 x 5 frac12
1600 2063 450 480300 3556 2500 239757 33 ndash 79 13 406 524 114 218
14 16000 350 70400 013 ndash 031063
0132 ndash 1 x 5 frac12
1825 2350 450 580350 4064 2500 313155 33 ndash 79 11 464 597 114 263
16 18000 350 89100 013 ndash 031057
0122 ndash 1 x 5 frac12
2038 2550 450 650400 4572 2500 396335 33 ndash 79 10 517 647 114 295
18 20000 350 109950 013 ndash 031050
0102 ndash 1 983089frasl983096 x 5 frac12
2263 2713 450 820450 5080 2500 489304 33 ndash 79 9 575 689 114 372
20 22000 350 133050 013 ndash 031050
0102 ndash 1 983089frasl983096 x 6
2475 2925 450 990500 5588 2500 592075 33 ndash 79 9 6287 7430 114 449
22 24000 350 158336 013 ndash 031042
0092 ndash 1 983089frasl983096 x 5 frac12
2688 3238 450 1070550 6096 2500 704275 33 ndash 79 8 683 822 114 485
24 26000 300 159279 015-053083
0184 ndash 1 983089frasl983096 x 6
3013 3525 575 2050600 6604 2065 708508 381-1346 15 765 895 146 930
26 28000 300 184726 015-053078
0164 ndash 1 983089frasl983096 x 6
3225 3725 575 2200650 7112 2065 821702 381-1346 14 819 945 146 998
28 30000 300 212058 015-053 073 016 4 ndash 1 frac14 x 7 3388 3963 575 2270700 7620 2065 943281 381-1346 14 863 1007 146 1030
30 32000 300 241274 015-053068
0144 ndash 1 frac14 x 7
3613 4175 575 2420750 8128 2065 1073240 381-1346 11 916 1060 146 1098
32 34000 300 272375 015 - 053069
0134 ndash 1 frac14 x 7
3825 4375 575 2550800 8650 2065 1212070 381 - 1346 11 972 1111 146 1157
34 36000 300 305363 015-053060
0134 ndash 1 frac14 x 7
4025 4575 575 2680850 9144 2065 1358322 381-1346 11 1022 1161 146 1216
36 38000 300 340235 015-053060
0134 ndash 1 frac14 x 7
4125 4800 575 2980900 9652 2065 1513365 381-1346 11 1048 1219 146 1350
38 40000 300 376991 021-059055
0124 ndash 1 frac12 x 7
4400 5050 650 3400950 10160 2065 1676940 533-1499 10 1117 1283 165 1542
40 42000 300 415632 021-059052
0114 ndash 1 frac12 x 8
4600 5250 650 36001000 10668 2065 1848823 533-1499 9 1168 1334 165 1633
42 44000 232 352763 021 - 05905
0104 ndash 1 frac12 x 8
4800 5450 650 39001050 11500 1600 1569795 533 - 1499 8 1219 1384 165 1769
44 46000 232 385561 021-059047
0104 ndash 1 frac12 x 8
5025 5650 650 41501100 11684 1600 1715746 533-1499 8 1277 1435 165 1882
Working Pressure and End Load are total from all internal and external loads based on carbon steel AGS rings installed in accordance with Victaulicspecifications Contact Victaulic for performance on other ring materials
WARNING FOR ONE TIME FIELD TEST ONLY the Maximum Joint Working Pressure may be increased to 1 frac12 times the figures shown
Metric thread size bolts are available (color coded gold) for all coupling sizes upon request Contact Victaulic for details
dagger Allowable Pipe End Separation and Deflection figures show the maximum nominal range of movement available at each joint for AGS roll grooved pipe
These figures are maximums for design and installation purposes these figures should be reduced by 25NOTE The Style W77 AGS Vic-Ring system is available for pipe sizes ranging from 12 - 60300 - 1500 mm The coupling used to join these pipes will always bethe next largest size (ex 12300mm pipe requires the use of 14350 mm coupling) The larger size is needed to allow for the extra outside pipe diameter theAGS ring adds to the pipe
TYPICAL 12 ndash 24 300 ndash 600 mm
X
ZY
TYPICAL 26 ndash 60 660 ndash 1500 mm
ZY
X
ZY
X
TYPICAL 621550 amp 72 1825 mm
1612_3
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 47
DIMENSIONS
Size Max Working Pressure
Max EndLoadLbsN
Allow PipeEnd Sep
Deflect FromCL
BoltNutNo - Size Dimensions ndash Inchesmm
ApproxWgt Each
Nominal Pipe
Size Inchesmm
Coupling
SizeInmm psikPa On Vic-Ring
Inchesmm
Per
CplgDeg
Pipe
InFtmmm Inches X Y Z
CouplingOnly
Lbskg
46 48000 232 419820 021-059045
0104 ndash 1 frac12 x 8
5225 5850 650 42501150 12192 1600 1868199 533-1499 8 1328 1485 165 1928
48 50000 232 455530 028-066043
0094 ndash 1 frac12 x 8
5363 6088 1000 50001200 12700 1600 2026298 711-1676 75 1362 1546 254 2270
52 54000 175 400790 028-066040
0084 ndash 1 frac12 x 7
5900 6513 1000 64801300 13716 1200 1782803 711-1676 7 1499 1655 254 2939
54 56000 175 431030 028-066038
0084 ndash 1 frac12 x 7
6100 6763 1000 67601350 14222 1200 1917317 711-1676 7 1550 1718 254 3066
58 60000 175 494800 028-066036
0084 ndash 1 frac12 x 7
6500 7213 1000 72001450 15240 1200 2201025 711-1676 7 1652 1832 254 3266
60 62000 175 528340 028-066035
0074 ndash 1 frac12 x 7
6728 7363 1000 95601500 15748 1200 2350173 711-1676 6 1709 1870 254 4336
Working Pressure and End Load are total from all internal and external loads based on carbon steel AGS rings installed in accordance with Victaulicspecifications Contact Victaulic for performance on other ring materials
WARNING FOR ONE TIME FIELD TEST ONLY the Maximum Joint Working Pressure may be increased to 1 frac12 times the figures shown
Metric thread size bolts are available (color coded gold) for all coupling sizes upon request Contact Victaulic for detailsdagger Allowable Pipe End Separation and Deflection figures show the maximum nominal range of movement available at each joint for AGS roll grooved pipe
These figures are maximums for design and installation purposes these figures should be reduced by 25NOTE The Style W77 AGS Vic-Ring system is available for pipe sizes ranging from 12 - 60300 - 1500 mm The coupling used to join these pipes will always bethe next largest size (ex 12300mm pipe requires the use of 14350 mm coupling) The larger size is needed to allow for the extra outside pipe diameter theAGS ring adds to the pipe
TYPICAL 12 ndash 24 300 ndash 600 mm
X
ZY
TYPICAL 26 ndash 60 660 ndash 1500 mm
ZY
X
ZY
X
TYPICAL 621550 amp 72 1825 mm
1612_4
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 57
Rubber-Lined Flush Rubber-Lined Overhung
LINING OPTIONS
Flush Overhung
Rubber Lined with Protective Bumper- Flush Rubber Lined with Protective Bumper- Overhung
Rubber-Lined Flush Rubber lined- Overhung
Chromium Carbide Overlay (CCO)- Overhung
UNLINED SERVICES
Suitable for use on abrasive and non-abrasive services
ABRASION SERVICES
ABRASION AND CORROSION SERVICES
1612_5
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 67
ALL SERVICE OPTIONS
Y
L
See weld
note
Flush
Y
L
See weld
note
Overhung
Size AGS Vic-Ring
NominalSize
InmmCoupling Size
Inmm
ODRing SizeInmm
LDaggerInmm
YdaggerInmm
Approx RingWeight Each
Lbskg
12 14000 14000 300 613 - 631 190300 3556 3556 762 1557 - 1603 86
14 16000 16000 300 613 - 631 370350 4064 4064 762 1557 - 1603 168
16 18000 18000 300 613 - 631 410400 4572 4572 762 1557 - 1603 186
18 20000 20000 300 613 - 631 460450 5080 5080 762 1557 - 1603 209
20 22000 22000 300 613 - 631 510500 5588 5588 762 1557 - 1603 231
22 24000 24000 300 613 - 631 560550 6096 6096 762 1557 - 1603 254
24 26000 26000 400 815- 853 810600 6604 6604 1016 2070 - 2167 367
26 28000 28000 400 815- 853 870650 7112 7112 1016 2070 - 2167 395
28 30000 30000 400 815- 853 940700 7620 7620 1016 2070 - 2167 426
30 32000 32000 400 815- 853 1000750 8128 8128 1016 2070 - 2167 484
32 34000 34000 400 821- 859 1070800 8650 8650 1016 2085 - 2182 485
34 36000 36000 400 815- 853 1130850 9144 9144 1016 2070 - 2167 513
36 38000 38000 400 815- 853 1200900 9652 9652 1016 2070 - 2167 544
38 40000 40000 425 871- 909 1330950 10160 10160 1080 2212 - 2309 603
40 42000 42000 425 871- 909 14001000 10668 10668 1080 2212 - 2309 635
42 44000 44000 425 871- 909 14601050 11500 11500 1080 2212 - 2309 662
44 46000 46000 425 871- 909 15201100 11684 11684 1080 2212 - 2309 690
46 48000 48000 425 871- 909 16001150 12192 12192 1080 2212 - 2309 726
48 50000 50000 425 871- 909 18601200 12700 12700 1080 2212 - 2309 844
52 54000 54000 500 1028- 1066 21501300 13716 13716 1270 2611 - 2708 975
54 56000 56000 500 1028- 1066 22301350 14222 14222 1270 2611 - 2708 1012
58 60000 60000 500 1028- 1066 23901450 15240 15240 1270 2611 - 2708 1084
60 62000 62000 500 1028- 1060 27001500 15748 15748 1270 2611 - 2708 1225
Weld Note Minimum recommended weld size is 983091frasl 98309697 mm for 14350 mm and largerstandard and extra heavy pipe For 12300 mm pipe the minimum recommended weldsize is frac1464 mm
dagger For allowable pipe end separation see dimensional table on page 3
Dagger L dimension is from inside face to end of ring for all lined and un-lined configurations
1612_6
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 77
WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details
This product shall be manufactured by Victaulic or to Victaulic specifications All products to be
installed in accordance with current Victaulic installationassembly instructions Victaulic reserves the
right to change product specifications designs and standard equipment without notice and without
incurring obligations
NOTE
Reference should always be made to the Victaulic Field Installation Instructions for the product you
are installing Victaulic Field Installation Instructions are included with each shipment of Victaulic
products for complete installation and assembly data and are available in PDF format on our website
at wwwvictauliccom
INSTALLATION
TORQUE REQUIREMENTSSize Recommended Torque
NominalSize
Inchesmm
ft lbsNbullm
12 14 16 18 250300 350 400 450 340
20 22 24 26 28 375500 550 600 650 700 500
30 32 34 36 38 500750 800 850 900 950 680
40 42 44 46 48 50 54 56 60 62 600100 0 1050 110 0 1150 120 0 1250 1350 140 0 150 0 1550 813
1612
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
For complete contact information visit wwwvictauliccom
1612 6322 REV H UPDATED 062013
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 47
DIMENSIONS
Size Max Working Pressure
Max EndLoadLbsN
Allow PipeEnd Sep
Deflect FromCL
BoltNutNo - Size Dimensions ndash Inchesmm
ApproxWgt Each
Nominal Pipe
Size Inchesmm
Coupling
SizeInmm psikPa On Vic-Ring
Inchesmm
Per
CplgDeg
Pipe
InFtmmm Inches X Y Z
CouplingOnly
Lbskg
46 48000 232 419820 021-059045
0104 ndash 1 frac12 x 8
5225 5850 650 42501150 12192 1600 1868199 533-1499 8 1328 1485 165 1928
48 50000 232 455530 028-066043
0094 ndash 1 frac12 x 8
5363 6088 1000 50001200 12700 1600 2026298 711-1676 75 1362 1546 254 2270
52 54000 175 400790 028-066040
0084 ndash 1 frac12 x 7
5900 6513 1000 64801300 13716 1200 1782803 711-1676 7 1499 1655 254 2939
54 56000 175 431030 028-066038
0084 ndash 1 frac12 x 7
6100 6763 1000 67601350 14222 1200 1917317 711-1676 7 1550 1718 254 3066
58 60000 175 494800 028-066036
0084 ndash 1 frac12 x 7
6500 7213 1000 72001450 15240 1200 2201025 711-1676 7 1652 1832 254 3266
60 62000 175 528340 028-066035
0074 ndash 1 frac12 x 7
6728 7363 1000 95601500 15748 1200 2350173 711-1676 6 1709 1870 254 4336
Working Pressure and End Load are total from all internal and external loads based on carbon steel AGS rings installed in accordance with Victaulicspecifications Contact Victaulic for performance on other ring materials
WARNING FOR ONE TIME FIELD TEST ONLY the Maximum Joint Working Pressure may be increased to 1 frac12 times the figures shown
Metric thread size bolts are available (color coded gold) for all coupling sizes upon request Contact Victaulic for detailsdagger Allowable Pipe End Separation and Deflection figures show the maximum nominal range of movement available at each joint for AGS roll grooved pipe
These figures are maximums for design and installation purposes these figures should be reduced by 25NOTE The Style W77 AGS Vic-Ring system is available for pipe sizes ranging from 12 - 60300 - 1500 mm The coupling used to join these pipes will always bethe next largest size (ex 12300mm pipe requires the use of 14350 mm coupling) The larger size is needed to allow for the extra outside pipe diameter theAGS ring adds to the pipe
TYPICAL 12 ndash 24 300 ndash 600 mm
X
ZY
TYPICAL 26 ndash 60 660 ndash 1500 mm
ZY
X
ZY
X
TYPICAL 621550 amp 72 1825 mm
1612_4
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 57
Rubber-Lined Flush Rubber-Lined Overhung
LINING OPTIONS
Flush Overhung
Rubber Lined with Protective Bumper- Flush Rubber Lined with Protective Bumper- Overhung
Rubber-Lined Flush Rubber lined- Overhung
Chromium Carbide Overlay (CCO)- Overhung
UNLINED SERVICES
Suitable for use on abrasive and non-abrasive services
ABRASION SERVICES
ABRASION AND CORROSION SERVICES
1612_5
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 67
ALL SERVICE OPTIONS
Y
L
See weld
note
Flush
Y
L
See weld
note
Overhung
Size AGS Vic-Ring
NominalSize
InmmCoupling Size
Inmm
ODRing SizeInmm
LDaggerInmm
YdaggerInmm
Approx RingWeight Each
Lbskg
12 14000 14000 300 613 - 631 190300 3556 3556 762 1557 - 1603 86
14 16000 16000 300 613 - 631 370350 4064 4064 762 1557 - 1603 168
16 18000 18000 300 613 - 631 410400 4572 4572 762 1557 - 1603 186
18 20000 20000 300 613 - 631 460450 5080 5080 762 1557 - 1603 209
20 22000 22000 300 613 - 631 510500 5588 5588 762 1557 - 1603 231
22 24000 24000 300 613 - 631 560550 6096 6096 762 1557 - 1603 254
24 26000 26000 400 815- 853 810600 6604 6604 1016 2070 - 2167 367
26 28000 28000 400 815- 853 870650 7112 7112 1016 2070 - 2167 395
28 30000 30000 400 815- 853 940700 7620 7620 1016 2070 - 2167 426
30 32000 32000 400 815- 853 1000750 8128 8128 1016 2070 - 2167 484
32 34000 34000 400 821- 859 1070800 8650 8650 1016 2085 - 2182 485
34 36000 36000 400 815- 853 1130850 9144 9144 1016 2070 - 2167 513
36 38000 38000 400 815- 853 1200900 9652 9652 1016 2070 - 2167 544
38 40000 40000 425 871- 909 1330950 10160 10160 1080 2212 - 2309 603
40 42000 42000 425 871- 909 14001000 10668 10668 1080 2212 - 2309 635
42 44000 44000 425 871- 909 14601050 11500 11500 1080 2212 - 2309 662
44 46000 46000 425 871- 909 15201100 11684 11684 1080 2212 - 2309 690
46 48000 48000 425 871- 909 16001150 12192 12192 1080 2212 - 2309 726
48 50000 50000 425 871- 909 18601200 12700 12700 1080 2212 - 2309 844
52 54000 54000 500 1028- 1066 21501300 13716 13716 1270 2611 - 2708 975
54 56000 56000 500 1028- 1066 22301350 14222 14222 1270 2611 - 2708 1012
58 60000 60000 500 1028- 1066 23901450 15240 15240 1270 2611 - 2708 1084
60 62000 62000 500 1028- 1060 27001500 15748 15748 1270 2611 - 2708 1225
Weld Note Minimum recommended weld size is 983091frasl 98309697 mm for 14350 mm and largerstandard and extra heavy pipe For 12300 mm pipe the minimum recommended weldsize is frac1464 mm
dagger For allowable pipe end separation see dimensional table on page 3
Dagger L dimension is from inside face to end of ring for all lined and un-lined configurations
1612_6
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 77
WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details
This product shall be manufactured by Victaulic or to Victaulic specifications All products to be
installed in accordance with current Victaulic installationassembly instructions Victaulic reserves the
right to change product specifications designs and standard equipment without notice and without
incurring obligations
NOTE
Reference should always be made to the Victaulic Field Installation Instructions for the product you
are installing Victaulic Field Installation Instructions are included with each shipment of Victaulic
products for complete installation and assembly data and are available in PDF format on our website
at wwwvictauliccom
INSTALLATION
TORQUE REQUIREMENTSSize Recommended Torque
NominalSize
Inchesmm
ft lbsNbullm
12 14 16 18 250300 350 400 450 340
20 22 24 26 28 375500 550 600 650 700 500
30 32 34 36 38 500750 800 850 900 950 680
40 42 44 46 48 50 54 56 60 62 600100 0 1050 110 0 1150 120 0 1250 1350 140 0 150 0 1550 813
1612
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
For complete contact information visit wwwvictauliccom
1612 6322 REV H UPDATED 062013
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 57
Rubber-Lined Flush Rubber-Lined Overhung
LINING OPTIONS
Flush Overhung
Rubber Lined with Protective Bumper- Flush Rubber Lined with Protective Bumper- Overhung
Rubber-Lined Flush Rubber lined- Overhung
Chromium Carbide Overlay (CCO)- Overhung
UNLINED SERVICES
Suitable for use on abrasive and non-abrasive services
ABRASION SERVICES
ABRASION AND CORROSION SERVICES
1612_5
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 67
ALL SERVICE OPTIONS
Y
L
See weld
note
Flush
Y
L
See weld
note
Overhung
Size AGS Vic-Ring
NominalSize
InmmCoupling Size
Inmm
ODRing SizeInmm
LDaggerInmm
YdaggerInmm
Approx RingWeight Each
Lbskg
12 14000 14000 300 613 - 631 190300 3556 3556 762 1557 - 1603 86
14 16000 16000 300 613 - 631 370350 4064 4064 762 1557 - 1603 168
16 18000 18000 300 613 - 631 410400 4572 4572 762 1557 - 1603 186
18 20000 20000 300 613 - 631 460450 5080 5080 762 1557 - 1603 209
20 22000 22000 300 613 - 631 510500 5588 5588 762 1557 - 1603 231
22 24000 24000 300 613 - 631 560550 6096 6096 762 1557 - 1603 254
24 26000 26000 400 815- 853 810600 6604 6604 1016 2070 - 2167 367
26 28000 28000 400 815- 853 870650 7112 7112 1016 2070 - 2167 395
28 30000 30000 400 815- 853 940700 7620 7620 1016 2070 - 2167 426
30 32000 32000 400 815- 853 1000750 8128 8128 1016 2070 - 2167 484
32 34000 34000 400 821- 859 1070800 8650 8650 1016 2085 - 2182 485
34 36000 36000 400 815- 853 1130850 9144 9144 1016 2070 - 2167 513
36 38000 38000 400 815- 853 1200900 9652 9652 1016 2070 - 2167 544
38 40000 40000 425 871- 909 1330950 10160 10160 1080 2212 - 2309 603
40 42000 42000 425 871- 909 14001000 10668 10668 1080 2212 - 2309 635
42 44000 44000 425 871- 909 14601050 11500 11500 1080 2212 - 2309 662
44 46000 46000 425 871- 909 15201100 11684 11684 1080 2212 - 2309 690
46 48000 48000 425 871- 909 16001150 12192 12192 1080 2212 - 2309 726
48 50000 50000 425 871- 909 18601200 12700 12700 1080 2212 - 2309 844
52 54000 54000 500 1028- 1066 21501300 13716 13716 1270 2611 - 2708 975
54 56000 56000 500 1028- 1066 22301350 14222 14222 1270 2611 - 2708 1012
58 60000 60000 500 1028- 1066 23901450 15240 15240 1270 2611 - 2708 1084
60 62000 62000 500 1028- 1060 27001500 15748 15748 1270 2611 - 2708 1225
Weld Note Minimum recommended weld size is 983091frasl 98309697 mm for 14350 mm and largerstandard and extra heavy pipe For 12300 mm pipe the minimum recommended weldsize is frac1464 mm
dagger For allowable pipe end separation see dimensional table on page 3
Dagger L dimension is from inside face to end of ring for all lined and un-lined configurations
1612_6
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 77
WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details
This product shall be manufactured by Victaulic or to Victaulic specifications All products to be
installed in accordance with current Victaulic installationassembly instructions Victaulic reserves the
right to change product specifications designs and standard equipment without notice and without
incurring obligations
NOTE
Reference should always be made to the Victaulic Field Installation Instructions for the product you
are installing Victaulic Field Installation Instructions are included with each shipment of Victaulic
products for complete installation and assembly data and are available in PDF format on our website
at wwwvictauliccom
INSTALLATION
TORQUE REQUIREMENTSSize Recommended Torque
NominalSize
Inchesmm
ft lbsNbullm
12 14 16 18 250300 350 400 450 340
20 22 24 26 28 375500 550 600 650 700 500
30 32 34 36 38 500750 800 850 900 950 680
40 42 44 46 48 50 54 56 60 62 600100 0 1050 110 0 1150 120 0 1250 1350 140 0 150 0 1550 813
1612
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
For complete contact information visit wwwvictauliccom
1612 6322 REV H UPDATED 062013
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 67
ALL SERVICE OPTIONS
Y
L
See weld
note
Flush
Y
L
See weld
note
Overhung
Size AGS Vic-Ring
NominalSize
InmmCoupling Size
Inmm
ODRing SizeInmm
LDaggerInmm
YdaggerInmm
Approx RingWeight Each
Lbskg
12 14000 14000 300 613 - 631 190300 3556 3556 762 1557 - 1603 86
14 16000 16000 300 613 - 631 370350 4064 4064 762 1557 - 1603 168
16 18000 18000 300 613 - 631 410400 4572 4572 762 1557 - 1603 186
18 20000 20000 300 613 - 631 460450 5080 5080 762 1557 - 1603 209
20 22000 22000 300 613 - 631 510500 5588 5588 762 1557 - 1603 231
22 24000 24000 300 613 - 631 560550 6096 6096 762 1557 - 1603 254
24 26000 26000 400 815- 853 810600 6604 6604 1016 2070 - 2167 367
26 28000 28000 400 815- 853 870650 7112 7112 1016 2070 - 2167 395
28 30000 30000 400 815- 853 940700 7620 7620 1016 2070 - 2167 426
30 32000 32000 400 815- 853 1000750 8128 8128 1016 2070 - 2167 484
32 34000 34000 400 821- 859 1070800 8650 8650 1016 2085 - 2182 485
34 36000 36000 400 815- 853 1130850 9144 9144 1016 2070 - 2167 513
36 38000 38000 400 815- 853 1200900 9652 9652 1016 2070 - 2167 544
38 40000 40000 425 871- 909 1330950 10160 10160 1080 2212 - 2309 603
40 42000 42000 425 871- 909 14001000 10668 10668 1080 2212 - 2309 635
42 44000 44000 425 871- 909 14601050 11500 11500 1080 2212 - 2309 662
44 46000 46000 425 871- 909 15201100 11684 11684 1080 2212 - 2309 690
46 48000 48000 425 871- 909 16001150 12192 12192 1080 2212 - 2309 726
48 50000 50000 425 871- 909 18601200 12700 12700 1080 2212 - 2309 844
52 54000 54000 500 1028- 1066 21501300 13716 13716 1270 2611 - 2708 975
54 56000 56000 500 1028- 1066 22301350 14222 14222 1270 2611 - 2708 1012
58 60000 60000 500 1028- 1066 23901450 15240 15240 1270 2611 - 2708 1084
60 62000 62000 500 1028- 1060 27001500 15748 15748 1270 2611 - 2708 1225
Weld Note Minimum recommended weld size is 983091frasl 98309697 mm for 14350 mm and largerstandard and extra heavy pipe For 12300 mm pipe the minimum recommended weldsize is frac1464 mm
dagger For allowable pipe end separation see dimensional table on page 3
Dagger L dimension is from inside face to end of ring for all lined and un-lined configurations
1612_6
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
wwwvictauliccom
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
REV_H
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 77
WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details
This product shall be manufactured by Victaulic or to Victaulic specifications All products to be
installed in accordance with current Victaulic installationassembly instructions Victaulic reserves the
right to change product specifications designs and standard equipment without notice and without
incurring obligations
NOTE
Reference should always be made to the Victaulic Field Installation Instructions for the product you
are installing Victaulic Field Installation Instructions are included with each shipment of Victaulic
products for complete installation and assembly data and are available in PDF format on our website
at wwwvictauliccom
INSTALLATION
TORQUE REQUIREMENTSSize Recommended Torque
NominalSize
Inchesmm
ft lbsNbullm
12 14 16 18 250300 350 400 450 340
20 22 24 26 28 375500 550 600 650 700 500
30 32 34 36 38 500750 800 850 900 950 680
40 42 44 46 48 50 54 56 60 62 600100 0 1050 110 0 1150 120 0 1250 1350 140 0 150 0 1550 813
1612
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
For complete contact information visit wwwvictauliccom
1612 6322 REV H UPDATED 062013
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
8102019 Vic ring 1612
httpslidepdfcomreaderfullvic-ring-1612 77
WARRANTY Refer to the Warranty section of the current Price List or contact Victaulic for details
This product shall be manufactured by Victaulic or to Victaulic specifications All products to be
installed in accordance with current Victaulic installationassembly instructions Victaulic reserves the
right to change product specifications designs and standard equipment without notice and without
incurring obligations
NOTE
Reference should always be made to the Victaulic Field Installation Instructions for the product you
are installing Victaulic Field Installation Instructions are included with each shipment of Victaulic
products for complete installation and assembly data and are available in PDF format on our website
at wwwvictauliccom
INSTALLATION
TORQUE REQUIREMENTSSize Recommended Torque
NominalSize
Inchesmm
ft lbsNbullm
12 14 16 18 250300 350 400 450 340
20 22 24 26 28 375500 550 600 650 700 500
30 32 34 36 38 500750 800 850 900 950 680
40 42 44 46 48 50 54 56 60 62 600100 0 1050 110 0 1150 120 0 1250 1350 140 0 150 0 1550 813
1612
AGS Vic-Ringreg SystemsSTYLE W77- Flexible Coupling
1612CARBON STEEL PIPE ndash COUPLINGS FOR VIC-RING SYSTEMS
For complete contact information visit wwwvictauliccom
1612 6322 REV H UPDATED 062013
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY copy 2013 VICTAULIC COMPANY ALL RIGHTS RESERVED
