SEALS AND MORE

Turningand milling parts

SPÄH Customer Focus –For your benefit

Within the SPÄH Group of companies,the parent company in Scheer is respon-

sible for operations in the field of „turningand milling parts“. Vulkollan® and polyure-

thane materials are supplied by QUADRIGA inNorderstedt, which is a member company of theGroup. Within these two companies, there aresome 350 qualified employees working in admini-stration, applications engineering consulting,

production, quality management and service.We possess special production engineeringknow-how and many years of experience in thefield of making-up and processing of plastics andelastomers. This gives us the capacity to provideyou with the requisite turned and milled partsproduced to the agreed level of precision madefrom marketable materials on time. For yourbenefit.

Turned and milled parts, asmultifunctional structuralparts and vendor parts, fulfilimportant tasks in manysectors of industrysuch as:

3 Plant manufacture

3 Fittings and apparatusmanufacture

3 Drive power

3 Automotive manufacturing

3 Chemicals industry

3 Compressed air engineering

3 Electrical engineering

3 Electronics

3 Vehicle manufacturing

3 Precision engineering

3 Heating/air-conditioning/ventilation

3 Hydraulics

3 Mechanical engineering

3 Medical engineering

3 Pneumatics

3 Conveying and materialshandling

3 Process engineering

3 Subcontracting

This broad spread of expe-rience across many sectorsof industry makes SPÄH aflexible, all-round partnerfor turning and milling partsmade from elastomers andplastics. Your advantage.

Our applications experience – your advantage

Whether it be for prototypes, a pilot lot ormass production – SPÄH puts your wishesinto practice at the agreed delivery time. Weare extremely flexible because we can offereverything from the same source in terms ofconsultancy, design, production and service.

The precise processing of high-performanceplastics is our strong point. Our efficient

production installations up to CNC completeprocessing, with an economic efficiencyfrom lot size 1, cover a broad spectrum ofrational machining processes for bars, tubesand sheets. This results in precision and quality at economic prices. Well-organisedsemi-finished parts prevents any storagematerial bottlenecks and adds to the certaintyof delivery on-time. Your profitability.

Just-in-time – your profitability

We possess a special know-how in thebroad spectrum of making-up and processing of standard and high-perfor-mance plastics such as elastomers, forexample using:

We work on request with many othermaterials. Equally, whatever the materialis that you want to utilise, we will pro-cess it to the specified level of accuracy.Your assurance.

Our materials experience – your assurance

We produce turned and milled partswith CNC - precision such as:

3 Bar machining up to 90 mm diametersuch as, for example:

ring seals, insulating elements, such asbearing and o-rings, spring components,wheels, rollers, covers, connectingelements and many others,

3 Machining of linings up to 3,000 mmdiameter for, as an example, drivecomponents, bearing rings and O-rings,seals, caps, covers, connecting elements and many others.

3 Machining of sheets up to 2,000 x1,000 x 100 mm for NC- milling partssuch as, for an example, strippers,impact buffers, drive plates, fixingdevices and many others.

In accordance with the standard, thedrawing, sample or data, you can obtainprototypes, small production runs ormass production.

All the stages of production are subjectedto continuous quality management as perDIN EN ISO 9001: 2000 supplementedby inspection methods as specified bythe customer. It is here that our basicprinciple of „Quality is Partnership“applies. Your added value.

The character as the sum of the proper-ties of a material is the deciding factorfor its capabilities and performance.When recommending materials we payattention to properties such as:

3 Abrasion resistance

3 Resistance to environmental influences(cold, heat, damp, dust, etc.)

3 Chemical resistance (oil, petrol, acids, alkaline solution, ozone, etc.)

3 Sound attenuation

3 Compression set

3 Elasticity

3 Identification, marking, coloration

3 Mechanical stability under load capacity (friction , pressure, tension,impact, etc.)

3 Wear resistance

3 Compoundability (metal/PUR)

3 Recycling capability

In addition, we can supply materials for you that have special properties.Your potential.

Materials having a certain character perform better – your potential

Quality managed turned and milled parts – your added value

EPDMFKMNBRPA PE PEEK

POMPTFE and PUR (Polyurethane,Vulkollan®) etc.

CNC Turning and milling parts Milling parts Turning parts

www.spaeh.de

Service and service support are top prio-rity items at SPÄH . Thus, in addition toturning and milling parts we offer furtherservices or assistance with rationalisationon, for example:

3 Plastic/metal combinations

3 Assembling parts

3 Mounting sub-assemblies

3 Identification using compression orembossing processes

3 Supply in sections as a set of seals

3 Supply in packaging of your choice

3 Supply in mounting racks

We pay attention to your special needsand are always at your disposal, which isas it should be in a good partnershiparrangement.

The SPÄH service – thebridge to partnership

Subj

ect

to a

ltera

tion

s •

Prin

ted

in G

erm

any

• 02

1002

LM

2.2

• ©

Neu

bert

Wer

bung

BL

SPÄH’s further operational areas within„Seals and more“ are in:

There are special information write-upsavailable for each ofthese operational areas.Further informationavailable on request.

Semifinished product

ran

ge

Seals and stamped

parts

C

ast and mouldedpar

ts

Special parts sealing

tech

no

log

y

W

ater jet cut parts

Karl Späh GmbH & Co. KGIndustriestraße 8 – 12, D-72516 Scheer

Telefon: +49 (0) 75 72/6 02-0Telefax: +49 (0) 75 72/6 02-16 7E-Mail: info@spaeh.de

2 0700-DICHTUNG

SEALS AND MORE