timesavers overzicht borstels 42 RB SERIES...ORIGINALS by Timesavers Brush type Suitable for...
Transcript of timesavers overzicht borstels 42 RB SERIES...ORIGINALS by Timesavers Brush type Suitable for...
ORIGINALSby Timesavers
Brush type ApplicationSuitable for
Aluminium Oxide
Silicon Carbide
Cross Flex
Cutting skin oxide
removal brush
Korfi l brush
Steel
Aluminium
Stainless steel
Especially for
aluminium
All metals
Steel with
blue oxide on
vertical faces
Aluminium
Slashed construction: 5 mm wide, all sorts
of materials, large radius until at least
2 mm (steel & aluminium (set of 8 brushes))
Part. no. 599316 599325 599317
Grit: 60 80 100
Slashed construction: 5 & 3 mm wide, more
suitable for edge rounding of small holes, finer
surface roughness (= lower RA worth) and less
stiff / less aggressive (set of 8 brushes)
Part. no. 599308 599306 599305 599326
Grit: 100 120 180 400
Longer brush life due to better chip removal
lesser smearing of the brush (set of 8 brushes).
Part. no. 599303
Grit: 180
For a “ No Way “ (directionless) finish and
removal of milling marks aluminium surfaces.
Standard grit size is 120 (set of 8 brushes).
Part. no. 599297
Grit: 120
Standard (not adjustable) brush for optimal oxide
skin removal on cut face.
Part. no. 459667 (set of 4 brushes) - 1 mm
Part. no. 460368 (set of 8 brushes) - 1 mm
Adjustable brush for use in combination
with deburring brushes.
Part. no. 460076 (set of 4 brushes) - 1,25 mm
For e.g. deep pockets and upstands
Part. no. 599329 (set of 8 brushes) - 1,25 mm
Grit: 120
1)
2)
3)
4)
5)
TIMESAVERS ORIGINALSOVERVIEW BRUSHES 42 RB SERIES
Order? Questions? Check: www.timesaversint.com Mail: [email protected] Tel: +31 - (0)113 238911
Slashed construction
Slashed construction
5 mm
5 mm
5 mm
3 mm
3 mm
5 mm
5 mm
5 mm