[15-147] 81R A3 folder Timesavers M Timesavers International, Goes, The Netherlands. Timesavers...

2
M Timesavers International, Goes, The Netherlands. Timesavers International B.V. Fruitlaan 20-30 4462 EP Goes The Netherlands T. +31 113 23 89 00 F. +31 113 23 20 03 [email protected] Local dealer: www.timesaversint.com See how it works? [scan the QR code] 81 Range Precision grinding machine Machine with reciprocating table to grind titanium, molybdenum, stainless steel, aluminium nickel alloys and carbon steel to a specific size with an accuracy of +/- 0,02. high stock removal rate by using coated abrasives. www.timesaversint.com Timesavers International is based in Goes, The Netherlands, with regional of- fices around the globe in Shanghai (China), Taichung (Taiwan), Kuala Lumpur (Malaysia) and Timesavers Inc. in Minneapolis (USA). Worldwide the company has more than 200 employees supported by a network of local dealers and partners. In the 76 years of their existence, they have built and sold over 55.000 machines, with customers in nearly all countries over the world. Goes is right next to the highway A58, easy accessible by car, but also by train, the trainstation is just around the corner. When travelling by plane, choose Airport Amsterdam or Brussels. Operating Worldwide: Visit us: Amsterdam Rotterdam Goes Antwerp Brussels 81 Range [15-147]

Transcript of [15-147] 81R A3 folder Timesavers M Timesavers International, Goes, The Netherlands. Timesavers...

Page 1: [15-147] 81R A3 folder Timesavers M Timesavers International, Goes, The Netherlands. Timesavers International B.V. Fruitlaan 20-30 4462 EP Goes The Netherlands T. +31 113 23 89 00

MTimesavers International, Goes, The Netherlands.

Timesavers International B.V.

Fruitlaan 20-30

4462 EP Goes

The Netherlands

T. +31 113 23 89 00

F. +31 113 23 20 03

[email protected]

Local dealer:

www.timesaversint.com

Seehow

itworks?

[scan the QR code]

81Range

Precision grinding machine

Machine with reciprocating table to grind titanium,

molybdenum, stainless steel, aluminium nickel

alloys and carbon steel to a specific size with an

accuracy of +/- 0,02. high stock removal rate by

using coated abrasives.

www.timesaversint.com

Timesavers International is based in Goes, The Netherlands, with regional of-

fices around the globe in Shanghai (China), Taichung (Taiwan), Kuala Lumpur

(Malaysia) and Timesavers Inc. in Minneapolis (USA). Worldwide the company

has more than 200 employees supported by a network of local dealers and

partners. In the 76 years of their existence, they have built and sold over

55.000 machines, with customers in nearly all countries over the world.

Goes is right next to the highway A58,

easy accessible by car, but also by

train, the trainstation is just around

the corner. When travelling by plane,

choose Airport Amsterdam or Brussels.

Operating Worldwide: Visit us:

Amsterdam

Rotterdam

Goes

Antwerp

Brussels

81Range

[15-

147]

Page 2: [15-147] 81R A3 folder Timesavers M Timesavers International, Goes, The Netherlands. Timesavers International B.V. Fruitlaan 20-30 4462 EP Goes The Netherlands T. +31 113 23 89 00

Available configurations:

Working width Min length Max length

600 mm 500 mm 7500 mm

1000 mm 500 mm 7500 mm

1600 mm 1500 mm 7500 mm

2100 mm 1500 mm 7500 mm

Applications:

- Precision grinding of titanium, molybdenum, stainless steel, nickel alloys, aluminium and carbon steel

- Grinding sheets to a specific thickness when not available on the market

- Eliminating machine marks

- Stock removal up to 0,2 mm per pass

- Accuracy +/- 0,02 mm

- Thinnest sheet 0,15 mm

- Centralized control panel on swing arm or slide on the machine frame

- HMI with pre-programmable settings

- Abrasive belt contact roller with possibility to run clockwise and counter clockwise rotation

- Wet execution, with integrated spray pipes in the machine and separate course and fine filter system

- Integrated vacuum system, with safety measuring system

- The vacuum system is capable of running wet and protected against swarf impact in the rotating parts

of the pump

- One or multiple vacuum segments, independent switchable

- Quick exchange system for the grinding belt

- Motorized table opening from 0-100 mm

- Variable feed of the reciprocating table from 0,1-10 m/min

- Variable speed of the abrasive grinding belt 7-22 m/sec

- Chiller in the filter unit

- CE

- Magnetic chuck, electro/permanent with demagnetizing cycle

- Special vacuum chuck for thin material < 0,6 mm

- Customized vacuum adapter plates for both thick and thin material

Standard execution: Options: