Swiss Garde 300 D Presence KNX/KLR€¦ · Swiss Garde 300 D Presence KNX/KLR Presence detector...
1
Züblin Elektro GmbH Marie-Curie-Strasse 2 | D-79618 Rheinfelden-Herten Phone +49 (0) 7623 96697-0 | Fax +49 (0) 7623 96697-7 | www.zublin.de Swiss Garde 300 KNX/KLR IP55 AP/UP Characteristics/installation With 3 pyrodetectors and a high resolution lens the Swiss Garde 300 D Presence KNX detects the smallest of movements and evaluates every signal with electronics driven by a microcontroller. Can be programmed with ETS3: Light control channel: After detecting a movement the detector sends a 1 telegram or a parameterisable dimming value (0–100%). If there is no movement then, after a parameterisable run-on time, the detector sends a 0 telegram or a second parameterisable dimming value (0–100%). HVAC control channel: This output only switches once 2 to 20 sequential ob- servation windows of equal length have each detected at least one mo- vement. Master or slave operation: Can be configured with ETS3. The light channel can be switched on or off with the IR remote control. After the reset time or after the AUTO button has been actuated the detector returns to normal operation. This KNX detector is also available with IP55 protection in UP or AP versions. Swiss Garde 300 D Presence KNX/KLR Presence detector with KNX/EIB interface, constant lighting control (KLR), wall-mounted TECHNICAL DATA Nominal voltage: 24 V DC (21–30 V DC) Power consumption: 0.4 W Detection angle: 180° Detection range: Approx. 4 m radius presence, approx. 10 m radius at 3 m height Installation height: 1–3 m PIR Sensors: 3 pyro sensors for extensive detection Sensitivity: Adjustable in 10 steps via ETS Settings: All settings can be parameterized via ETS3 Illuminance measurement: Light sensor with optical filter and linear output Illuminance value: Lux Value export via bus KNX connectors: Bus terminal, 4 pins for wires (Ø 0.6–0.8 mm 2 each) per pol Protection class: SG 300 D Präsenz KNX/KLR: IP20 internal installation, class II, CE SG 300 KNX/KLR IP55 UP/AP: IP55 protected against water jets, class II, CE Temperature range: -20 to +40 °C Dimensions: SG 300 D Presence KNX/KLR: 80x80x32 mm (visible dimensions) SG 300 KNX/KLR IP55 UP: 86x86x30 mm (visible dimensions) SG 300 KNX/KLR IP55 AP: 86x86x84 mm (visible dimensions) Description Color Art.-No Swiss Garde 300 D Presence KNX/KLR (wall-mounted) white 25240 Swiss Garde 300 KNX/KLR IP55 UP white 25241 Swiss Garde 300 KNX/KLR IP55 AP white 25242 Other colors upon request See accessories catalog Züblin DETECTION AREA 180° Approx. 16 m at a height of 3 m Approx. 4 m presence Approx. 10 m at a height of 3 m Optimum range If several zones are crossed Reduced range (approx. -50%) With movements within a single zone Presence zone (working area) Reacts to smallest movements (seated activity) Movement zone (walking area) Reacts to larger walking movements 86 mm 15 mm 30 mm 13 mm 11mm 80 mm 15 mm 32 mm 12 mm 11mm 86 mm 30 mm 54 mm • 3 pyrodetectors and a high resolution lens detect the smallest of movements • Operates fully or semi automatically • Passive infrared (PIR) presence detector for ceiling installation with EIB interface • A brightness sensor with linear output provides the light measure- ment. An integrated optical filter is matched to the profile of the human eye • In all operating modes the light sensor can trigger a 0 or 1 tele- gram in the event of the light level exceeding or dropping below a parameterisable lux value. The measured light value in lux can also be read out via the bus Installation height Dia. for presence * Dia. for movements * 1.0 m 2 m 6 m 1.5 m 3 m 7 m 2.0 m 4 m 8 m 2.5 m 4 m 9 m 3.0 m 4 m 10 m * Maximum values Approx. 10 m at a height of 3 m Approx. 4 m presence 1–3m SG 300 D Presence KNX/KLR SG 300 KNX/KLR IP55 UP SG 300 KNX/KLR IP55 AP
Transcript of Swiss Garde 300 D Presence KNX/KLR€¦ · Swiss Garde 300 D Presence KNX/KLR Presence detector...
Züblin Elektro GmbH Marie-Curie-Strasse 2 | D-79618 Rheinfelden-Herten Phone +49 (0) 7623 96697-0 | Fax +49 (0) 7623 96697-7 | www.zublin.de
Swiss Garde 300KNX/KLR IP55 AP/UP
Characteristics/installationWith 3 pyrodetectors and a high resolution lens the Swiss Garde 300 D Presence KNX detects the smallest of movements and evaluates every signal with electronics driven by a microcontroller. Can be programmed with ETS3:
Light control channel: After detecting a movement the detector sends a 1 telegram or a parameterisable dimming value (0–100%). If there is no movement then, after a parameterisable run-on time, the detector sends a 0 telegram or a second parameterisable dimming value (0–100%). HVAC control channel: This output only switches once 2 to 20 sequential ob-servation windows of equal length have each detected at least one mo-vement. Master or slave operation: Can be configured with ETS3. The light channel can be switched on or off with the IR remote control. After the reset time or after the AUTO button has been actuated the detector returns to normal operation. This KNX detector is also available with IP55 protection in UP or AP versions.
Swiss Garde 300 D Presence KNX/KLRPresence detector with KNX/EIB interface, constant lighting control (KLR), wall-mounted
TECHNICAL DATANominal voltage: 24 V DC (21–30 V DC)Power consumption: 0.4 WDetection angle: 180°Detection range: Approx. 4 m radius presence, approx. 10 m radius at 3 m heightInstallation height: 1–3 mPIR Sensors: 3 pyro sensors for extensive detectionSensitivity: Adjustable in 10 steps via ETSSettings: All settings can be parameterized via ETS3Illuminance measurement: Light sensor with optical filter and linear outputIlluminance value: Lux Value export via busKNX connectors: Bus terminal, 4 pins for wires (Ø 0.6–0.8 mm2 each) per polProtection class: SG 300 D Präsenz KNX/KLR: IP20 internal installation, class II, CE SG 300 KNX/KLR IP55 UP/AP: IP55 protected against water jets, class II, CETemperature range: -20 to +40 °CDimensions: SG 300 D Presence KNX/KLR: 80x80x32 mm (visible dimensions) SG 300 KNX/KLR IP55 UP: 86x86x30 mm (visible dimensions) SG 300 KNX/KLR IP55 AP: 86x86x84 mm (visible dimensions)
Description Color Art.-No
Swiss Garde 300 D Presence KNX/KLR (wall-mounted) white 25240
Swiss Garde 300 KNX/KLR IP55 UP white 25241
Swiss Garde 300 KNX/KLR IP55 AP white 25242
Other colors upon request
See accessories catalog Züblin
DETECTIoN AREA
180°
Appr
ox. 1
6m
at a
hei
ght o
f 3m
Approx. 4 m presence
Approx. 10 m at a height of 3 m
optimum rangeIf several zones are crossed
Reduced range (approx. -50%)With movements within a single zone
Presence zone (working area)Reacts to smallest movements (seated activity)
Movement zone (walking area)Reacts to larger walking movements
360°
max
. 8m
max. 4 m Präsenz
max. 8 m
360°
max
. 8m
max. 4 m Präsenz
max. 8 m
360°
max
. 8m
max. 4 m Präsenz
max. 8 m
360°
max
. 8m
max. 4 m Präsenz
max. 8 m
86m
m 15m
m
30 mm 13 mm 11mm
80m
m 15m
m
32 mm 12 mm 11mm
86m
m
30 mm 54 mm
• 3 pyrodetectors and a high resolution lens detect the smallest of movements
• Operates fully or semi automatically • Passive infrared (PIR) presence detector for
ceiling installation with EIB interface• A brightness sensor with linear output provides the light measure-
ment. An integrated optical filter is matched to the profile of the human eye
• In all operating modes the light sensor can trigger a 0 or 1 tele-gram in the event of the light level exceeding or dropping below a parameterisable lux value. The measured light value in lux can also be read out via the bus
Installation height
Dia. for presence *
Dia. for movements *
1.0 m 2 m 6 m
1.5 m 3 m 7 m
2.0 m 4 m 8 m
2.5 m 4 m 9 m
3.0 m 4 m 10 m
* Maximum values
Approx. 10 m at a height of 3 m
Approx. 4 m presence
1–3
m
SG 300 D Presence KNX/KLR
SG 300 KNX/KLR IP55 UP
SG 300 KNX/KLR IP55 AP
