SOMAS Valve guide · SOMAS - Valve guide Edition: 2018-10 Flanged MTV VSS 1 Cv = 1.16Kv HiCo = High...

Valve guide

SOMAS - Valve guide Edition: 2018-10

Ball segment valves

”Mini Flow”

KVT A-body* (DN 25/2 - DN 25/10)KVTW A/D-body* (DN 25/15 - DN 25/20) KVTF / KVXF L-body** (DN 25/2 - DN 50)KVTW / KVXW A/D-body* (DN 25 - DN 65)

Wafer

KVTW / KVXW A-body*KVTW / KVXW D-body*

1 Cv = 1.16Kv HiCo = High Cobalt Alloy HiNi = High Nickel Alloy *Ball segment wafer style A-body standard face to face D-body short face to face **Ball segment flanged style B-body standard face to face C-body short face to face L-body standard face to face

Size Features Pressure classes Material (valve body)DN 25/2 - 65 (PN 40/Class 300) 12 alternative

seat diameters for optimum sizing.

PN 10 - 40 Class 150 - 300

CF8M/1.4408 (316)

1.4470 (22Cr duplex)


CK3MCuN (6Mo)

C-2 (Titanium)

CW6M (HiNi)

Material (seat) Kv 1 Seat tightness DatasheetPTFE (DN 25/7 - 65)

(PN 40 / Class 300)0.18 - 191 Control valves

(EN 60534-4) PTFE - Cl.V/Opt. Cl.VI PTFE 53/Peek - CI.V HiCo - Cl.IV-S1/Opt. Cl.V

On/Off valves (EN 12266-1) PTFE - Rate D/Opt. Rate C PTFE 53 - Rate D HiCo - Rate F/Opt. Rate E

Si-101, Si-113, Si-114

PTFE 53 (DN 25/7 - 65) (PN 40/Class 300)

HiCo (DN 25/2 - 65) (PN 40/Class 300)

Size Features Pressure classes Material (valve body)DN 80 - 250 (PN 25)

A/D-bodyHigh capacity and large control range.Good tightness. Torque transmission free of backlash.

PN 10 - 25Class 150

CF8M/1.44081.4470

(316)(22Cr duplex)


CK3MCuN (6Mo)

C-2CW6M

(Titanium)(HiNi)

Material (seat) Kv 1 Seat tightness DatasheetPTFE 340 - 2150 (PN 25) Control valves

(EN 60534-4) PTFE - Cl.V/Opt. Cl.VI PTFE 53/Peek - Cl.V HiCo - Cl.IV-S1/ Opt. CI.V


Si-113, Si-114

PTFE 53

HiCo

Edition: 2018-10 SOMAS - Valve guide

Ball segment valves

Flanged

KVTF / KVXF B-body**KVTF /KVXF C-body**

High Consistency

KVMW A/D-body*KVMF B/C-body**KVMF MC**

1 Cv = 1.16Kv HiCo = High Cobalt Alloy HiNi = High Nickel Alloy *Ball segment wafer style A-body standard face to face D-body short face to face **Ball segment flanged style B-body standard face to face C-body short face to face

Size Features Pressure classes Material (valve body)DN 80 - 250

DN 80 - 400

(PN 40/Class 300) B-body(PN 25) C-body

As per the wafer design.

PN 10 - 40 Class 150 - 300

CF8M/1.44081.44701.4469

(316)(22Cr duplex)(25Cr duplex)

DN 80 - 400 (PN 25) B-body CK3MCuN (6Mo)

DN 500 (PN 10/PN 25) B-body

C-2CW6M

(Titanium)(HiNi)

DN 600 - 700 (PN 10) B-body

Material (seat) Kv 1 Seat tightness DatasheetPTFE 340 - 26516 Control valves

(EN 60534-4) PTFE - Cl.V/Opt. Cl.VI PTFE 53/Peek - Cl.V HiCo - Cl.IV-S1/Opt. CI.V


Si-110, Si-111, Si-112

PTFE 53

HiCo

Size Features Pressure classes Material (valve body)DN 25 - 50 (PN40) KVMW A/D-body

DN 80 - 250 (PN25) KVMW A/D-body

DN 80 - 400 (PN25) KVMF C-body

DN 80/100 - DN350/400 (PN25) KVMF MC C-body

DN 80 - 700 (PN10-25)KVTF B-body

For high consistency applications and low flow applications.

PN 10 - 40 Class 150 - 300

CF8M/1.4408 (316)

1.44701.4469

(22Cr duplex)(25Cr duplex)

CK3MCuN (6Mo)

C-2 (Titanium)

CW6M (HiNi)


(EN 60534-4) PTFE - Cl.V/Opt. Cl.VI PTFE 53/Peek - Cl.V HiCo - Cl.IV-S1/Opt. CI.V


Si-101, Si-110, Si-112, Si-112 MC, Si-113, Si-114PTFE 53

HiCo


Ball segment valves

Low Noise

KVTW LN / KVXW LN A/D-body* KVTF LN / KVXF LN B/C-body**

Low temperature

KVTW LT / KVXW LT A/D-body* KVTF LT / KVXF LT L-body**

1 Cv = 1.16Kv HiCo = High Cobalt Alloy HiNi = High Nickel Alloy *Ball segment wafer style A-body standard face to face D-body short face to face **Ball segment flanged style B-body standard face to face C-body short face to face L-body standard face to face

Size Features Pressure classes Material (valve body)DN 50 - 400 Prevent flashing and

cavitation.Noise reduction.

PN 10 - 40 Class 150 - 300

CF8M/1.4408 (316)



CK3MCuN (6Mo)

C-2 (Titanium)

CW6M (HiNi)


(EN 60534-4) PTFE - Cl.V/Opt. Cl.VI PTFE 53/Peek - Cl.V HiCo - Cl.IV-S1/Opt.CI.V


Si-108, Si-110, Si-111, Si-112, Si-113, Si-114PTFE 53

HiCo

Size Features Pressure classes Material (valve body)DN 25/2 - 50 For temperatures

down to –196 °C.PN 10 - 40 Class 150 - 300

CF8M/1.4408 (316)

Material (seat) Kv 1 Seat tightness DatasheetPTFE fibre glass reinforced

0.18 - 2410 Control valves (EN 60534-4) PTFE - Cl.V/Opt. Cl.VI HiCo - Cl.IV-S1

On/Off valves (EN 12266-1) PTFE - Rate C/Opt. Rate B HiCo - Rate D

Si-113, Si-114


Butterfly valves

Wafer

MTVVSS

1 Cv = 1.16Kv HiCo = High Cobalt Alloy HiNi = High Nickel Alloy

Size Features Pressure classes Material (valve body)DN 80 - 1200 (VSS) Wide range of

applications up to 550 °C and higher.Solid seat design - less sensitive to high flow velocity and impurities in the media.

PN 10 - 25 CF8M/1.4408 (316)

DN 80 - 500 (MTV) Class 150 1.4470 (22Cr duplex)

DN 80 - 600 (VSS PN 40) Class 300 1.4469 (25Cr duplex)

CK3MCuNC-2CW6M

(6Mo)(Titanium)(HiNi)

Material (seat) Kv 1 Seat tightness Datasheet1.4462/1.4470 235 - 62000 Control valves

(EN 60534-4) PTFE - Cl.V/Opt. Cl.VI Metal - CI.V

On/Off valves (EN 12266-1) PTFE - Rate C/Opt. Rate B Metal - Rate D

Si-203, Si-204, Si-205, Si-206, Si-208

PTFE

Ball segment valves

Wafer (PN 63-100 Cl. 600)

KVT A-body* (DN 25/5 - DN 150) KVX A-body* (DN 25/5 - DN 150)

Size Features Pressure classes Material (valve body)DN 25/5 - 150 High capacity and

large control range.Good tightness. Torque transmission free of backlash.

PN 63 - 100 Class 600

CF8M/1.4408 (316)

Material (seat) Kv 1 Seat tightness DatasheetHiCo 0.75 - 1047 Control valves

(EN 60534-4) Peek - Cl.V/Opt. Cl.VI HiCo - Cl.IV-S1/Opt.CI.V

On/Off valves (EN 12266-1) Peek - Rate D/Opt. Rate C HiCo - Rate F/Opt. Rate E

Si-105

PEEK


Flanged

MTVVSS


Size Features Pressure classes Material (valve body)DN 80 - 500 (MTV) As per the wafer

design.PN 10 - 25 Class 150 (MTV)PN 40 Class 300 (VSS)

CF8M/1.4408 (316)

DN 80 - 250 (VSS PN 40/ Class 300

1.44701.4469CK3MCuN

(22Cr duplex)(25Cr duplex)(6Mo)

C-2 (Titanium)

CW6M (HiNi)




Si-205 (DN 80 - 500)Si-204PTFE

Lugs

MTVVSS

Size Features Pressure classes Material (valve body)DN 80 - 1200 (VSS) As per the wafer

design.PN 10 - 100 Class 150 - 300

CF8M/1.4408 (316)

DN 80 - 350 (MTV) 1.44701.4469


DN 80 - 500 (VSS PN 40 Cl 300) CK3MCuN (6Mo)

DN 80 - 500 (VSS PN 100) C-2 (Titanium)

CW6M (HiNi)


(EN 60534-4) PTFE - Cl.V/Opt. Cl.VI Metal - Cl.V


Si-203, Si-204, Si-205, Si-206, Si-208, Si-209PTFE

HiCo

Butterfly valves


Butterfly valves

Low Noise

VSS LN

Size Features Pressure classes Material (valve body)DN 80 - 600 Prevent flashing and

cavitation.Noise reduction.

PN 10 - 40 Class 150 - 300

CF8M/1.4408 (316)

1.44701.4469CK3MCuN

(22Cr duplex)(25Cr duplex)(6Mo)

C-2 (Titanium)

CW6M (HiNi)




Si-211

PTFE

Low temperature

VSS LT


Size Features Pressure classes Material (valve body)DN 80 - 500 High capacity - low

pressure drop.PN 10 - 40 Class 150 - 300

CF8M (316)




Si-210

PTFE


Flange trunnion supported ball

SKVT

Flange floating ball

SKV

Ball valves


Size Features Pressure classes Material (valve body)DN 25 - 400 Spring loaded seats

for tight shut-off at low differential pressure.Floating ball.

PN 10 - 40 Class 150 - 300

CF8M/1.4408 (316)

1.44701.4469


CK3MCuNC-2C-2CW6M

(6Mo)(Titanium)

(HiNi)

Material (seat) Kv 1 Seat tightness DatasheetPTFE 53 80 - 26850 Control valves

(EN 60534-4) PTFE - Cl.V/Opt. Cl.VI HiCo- Cl.IV-S1/Opt. Cl.V

On/Off valves (EN 12266-1) PTFE - Rate D/Opt. Rate C HiCo - Rate F/Opt. Rate E

Si-706

HiCo

Size Features Pressure classes Material (valve body)DN 450 - 500 Trunnion supported

ball.PN 10 - 25 Class 150

CF8M/1.4408 (316)

Material (seat) Kv 1 Seat tightness DatasheetPTFE 53 35000 - 43000 Control valves

(EN 60534-4) PTFE - Cl.V/Opt Cl.VI HiCo- Cl.IV-S1/Opt. Cl.V

On/Off valves (EN 12266-1) PTFE- Rate D/Opt. Rate C HiCo - Rate F/Opt. Rate E

Si-706

HiCo


A - actuator double actingThe actuator type A-DA is a double-acting piston actuator for rotary motion. It is specially designed to meet the torque requirements for ball segment, ball and butterfly valves. The patented backlash free connection to the valve shaft offers the best possible solution to optimise control performance. With torque figures up to 20 000 Nm it covers the complete range of SOMAS valves. The actuator has ISO-connection to the valve and connection according to VDE/VDI 3845 to the accessories. Stainless steel screws, rods and nuts as standard.

A - actuator spring returnThe single acting type A-SC has a spring to close function while the type A-SO has a spring to open function. Both types are built on the same principle as the double acting type and completed with a spring package to achieve the desired function. The spring is built into a package to secure safe maintenance. The other features mentioned above for the double acting type are also valid for the single acting types. Locking device and manual override are available as additional equipments for the SOMAS actuators type A.

Manual actuators and accessoriesThe valve can be equipped with different types of manual actuators such as hand lever and gear unit and accessories such as mechanical switches or proximity switches depending on the application. Hand levers and gear units can be equipped with locking device.

PositionerThe pneumatic positioner type SP405The pneumatic positioner type SP405 is designed for an input signal 20 - 100 kPa (3 - 15 psi) or split-range. The standard positioner is equipped with a linear cam profile. A number of different cams are avaliable for other characteristic. It offers high flow capacity and easy adjustment of span and zero.

The electro pneumatic positioner type SPE405 The pneumatic positioner SP405 completed with an I/P-converter. The I/P-converter is in a separate housing which is mounted on the SP405. Capacity and adjustment as per type SP405 and an input signal 4-20 mA.


SOMAS Industry 4.0 - The Digital World

Digital Solutions

SOMAS offers intelligent control solutions by using valves and actuators of own design in combination with digital positioners from leading suppliers. Our flexibility offers the most “state-of-the-art” solutions for all demanding applications within all types of branches.

SOMAS can offer products with a number of communication protocols like HART, Profibus, Foundation fieldbus, AS-i, etc. Field buses reduce wiring, cost and increases flexibility and information flow for the end-user.

We can offer products with diagnostic features according to your specification which fully integrate into existing control system.

If there are special needs for configuration or setup we can configure this before delivery.

SOMAS Software

SOMSIZE – The SOMAS valve sizing program

By using SOMSIZE you will easily find the right type of valve and the right size for your application.

SOMSIZE is a web based program. Formulas for flow calculations are according to SS-EN 60534-2 and ANSI/ISA S75.0. Noise calculations are according to SS-EN 69534-8-3 (Gas service) and SS-EN 60534-8-4 (Liquid service), alternatively VDMA 24422, January 1989 edition.

Beside the valve sizing you can also have a valve specification complete with actuator and accessories along with main valve dimensions.

Contact SOMAS or our representatives for further information.

Application Handbook

SOMAS Application Handbook is an interactive tool where we have collected our many years of experience about valve options, material options as well as other important information about the valves we suggest for specific applications.

The business areas currently covered are: Pulp and Paper, shipping, diesel engines as well as power/energy production.

Certificates and product approvals

PED – complete quality assurance REACH-ROHS

ATEX – approved valves Lloyds

The Machinery Directive CU-TR (EAC)

SIL – safety integrity levels Sellihca

Fire test certificate Achilles

Food contact materials Bureau Veritas acc. to EU1935/2004, FDA

Head officeSOMAS Instrument AB

Norrlandsvägen 26 SE-661 40 SÄFFLE

Sweden

Phone: +46 (0)533 167 00

E-mail: [email protected]

www.somas.se

SOMAS Valve guide · SOMAS - Valve guide Edition: 2018-10 Flanged MTV VSS 1 Cv = 1.16Kv HiCo = High...

Documents

Transcript of SOMAS Valve guide · SOMAS - Valve guide Edition: 2018-10 Flanged MTV VSS 1 Cv = 1.16Kv HiCo = High...