PTM-3 0-Brochure-ENU-v23.pdf
-
Upload
sherif-ahmed-moussa -
Category
Documents
-
view
230 -
download
0
Transcript of PTM-3 0-Brochure-ENU-v23.pdf
-
8/9/2019 PTM-3 0-Brochure-ENU-v23.pdf
1/12
Primary Test Manager (PTM)
Testing and management software for primary assets
-
8/9/2019 PTM-3 0-Brochure-ENU-v23.pdf
2/12
2
The ideal tool for diagnostic testing and condition assessment
The Primary Test ManagerTM(PTM) is the ideal software tool for
diagnostic testing of power transformers, current transformers,
and circuit breakers.
PTM assists you (e.g. test engineers and asset managers) in
testing and assessing your equipment according to applicable
international IEEE and IEC standards and guidelines* while keeping
your testing time to a minimum. All test and assessment results are
automatically stored in a structured and easily accessible database.
* IEEE C57.152, IEC 60076-1, IEC 60076-3
Result analysis and reporting
> Auto-assessment
> Comparison of results
> Result visualization
> Customized reporting
Execution ofdiagnostic tests
> Asset specific test plans
> Wiring diagrams
> Auto save of results
Management of location,asset and test data
> Structured database
> Search & filter data
> Data synchronization
-
8/9/2019 PTM-3 0-Brochure-ENU-v23.pdf
3/12
3
Available tests with PTM
PTM provides a uniform and user friendly PC interface using
OMICRONs multi-functional test system CPC 100.Thereby, you can perform a wide range of tests on power
transformers, current transformers and circuit breakers as well as
associated assets such as bushings and tap changers.
Power factor / dissipation factor
and capacitance of transformers
Power factor / dissipation factor
and capacitance of bushings
Exciting current
Surge arresters
Insulating fluids
Short circuit impedance / leakage reactance
Transformer Turns Ratio ( TTR)
DC winding resistance
Transformer demagnetization
Power factor / dissipation factor
with variable frequency1
Frequency Response of Stray Losses (FRSL)1
Dynamic tap changer diagnostics (OLTC test)1
CPC 100
Power factor / dissipation factor
and capacitance of circuit breakers
Power factor / dissipation factor
and capacitance of bushings
Static contact resistance
Power factor / dissipation factor
with variable frequency1
Ratio with primary current injection
Power factor / dissipation factor and capacitance
Power factor / dissipation factor
with variable frequency1
Power transformers
Current transformers
Circuit breakers
1 Advanced diagnostic
-
8/9/2019 PTM-3 0-Brochure-ENU-v23.pdf
4/12
4
Software-guided workflow with PTM
Execution of diagnostic tests
Tailormade test plans
Based on the nameplate values
PTM generates a tailored test plan
according to current standards and
guidelines for each asset. Thereby,
PTM provides you a comprehensive
test plan to thoroughly assess the
condition of your asset.
By selecting or de-selecting
individual tests, you can tailor the
test procedure to your specific needs
with minimum effort. At the same
time, test plans can be configured inadvance to enable fast and effective
measurements on-site.
2
he Primary Test ManagerTMPTM) supports you inerforming measurements anduides you step by step through
he entire test procedure.
Detailled nameplate data
In order to assist you during testing,
PTM helps you in defining your
asset with specific nameplate
views. Indicating mandatory and
recommended parameters, data
entry is fast and easy.
You can enter information about
the location as well as nameplate
parameters such as serial number,
vector group, or voltage and current
ratings.
Once the data is entered, it can bere-used for all tests in the future.
1
-
8/9/2019 PTM-3 0-Brochure-ENU-v23.pdf
5/12
5
Easy connection due towiring diagrams
Pre-configured wiring diagrams,
depending on the selected asset
and connected test set, assist you
with setting up the test equipment
in the right way.
In doing so, you minimize the
likelihood of measurement errors,
speed up your testing process and
obtain accurate test results even
faster.
3 Remote control by PTM
The PTM enables you to control
and operate the connected test set
directly from a computer.
Results are automatically stored and
organized in the database on your
PC and are available for analysis and
reporting. Therefore, there is no
need to retrieve test results or files
from the test equipement after
performing measurements.
4 Instant assessment ofmeasurement results
Limit values can be set according to
current international standards and
guidelines, and based on many years
of OMICRON expertise.
An instant assessment of the test
results is displayed based on specified
limit values. This allows a fast, first
assessment of your assets condition.
5
-
8/9/2019 PTM-3 0-Brochure-ENU-v23.pdf
6/12
Automatic assessment
Limit values can be selected according to applicable
guidelines or defined based on your individual customizedlimit profiles.
A real-time overview of the test results is given during the
measurement, including a progress update and any open
tasks.
An instant pass/fail assessment of the test results is
displayed based on specified limit values. In addition,
a tooltip informs you which test parameters should be
investigated.
Result analysis and reporting
6
Graphical comparison of test results
An additional option for assessing the test results andfurther indication regarding the quality of the measured
values, is the graphical comparison function.
You can easily compare measurement results of previous
tests by loading them into the same diagram, for example
using previous test results of the same or similar asset.
Visualization of test results
Test results and their pass/fail assessment are visualized
within the table view and can hint towards further
investigation, if necessary.
The graphical display helps you to get detailled informationregarding the measured value and its assessment. Thereby,
test results and their reference values, e.g. nameplate
values, can be compared side-by-side in one diagram.
-
8/9/2019 PTM-3 0-Brochure-ENU-v23.pdf
7/12
7
Customized, individual reports
PTM supports you in adapting your reports to your
needs. Therefore, you can choose to generate your
report in Microsoft Word and as PDF file.
You can decide which parts are included in the test
report and can comment every test. Depending on the
test you can choose from different types of result tables
and diagrams contained in your test report.
Furthermore, you can incorporate your company logo,
photos and other test results for getting your individual
test report.
All-in-one-report
The PTM automatically generates reports including
all asset-related information and performed tests.This gives you an comprehensive overview of the test
object, test results and assessment.
The reports provide you all in one per asset:
> Information on location
> Nameplate information/values
> Overview on performed tests, obtained test results
and the assessment of the test results
-
8/9/2019 PTM-3 0-Brochure-ENU-v23.pdf
8/12
Management of location, asset and test data
Open Data Exchange
Primary Test Manager supports data exchange
between different test systems:
> You can export raw data of test results to
Microsoft Excel and in XML format
> You can generate reports in Microsoft Word
and as PDF file
> You can import and export asset and location
data through/from Microsoft Excel
Well-structured data management
The well-structured PTM database allows you to define
and manage locations, assets, jobs and reports in aneasy and fast way.
Once data of your assets was entered, you can re-use
it to generate new jobs or to enter similar assets. The
user-friendly design helps you in finding all asset related
data needed for the execution and assessment of tests.
Well-prepared and with lots of saved time you can
start the guided workflow for performing your
measurements.
For ensuring the all in one approach of PTM,
all kind of files can be attached to performed tests
or else compiled data as assets or locations.Thus, you can also store test results from measurements
which are not supported by PTM in the database,
e.g. oil quality data.
8
PTM
XMLPDF
Microsoft
Excel
Microsoft
Word
Manage view for having an generall overview
-
8/9/2019 PTM-3 0-Brochure-ENU-v23.pdf
9/12
9
The PTM Data Synch module allows:
> You can choose which data of other PTM users
should be synchronized to your local PC
> You can take the latest update of test data
related to your asset to the field
> You can add and update test data on-site and
upload it to the server back in the office
> You have one central server database with all
stored data to make backup
Data synchronization and back-up
With the PTM Data Synch module, you can synchronize
your local database with a Primary Test Manager serverdatabase.
You can choose to set up your server database on any
computer connected to an internal network or integrate it
into an existing SQL server infrastructure.
The sever database collects the test data from every user
connected to the server.
Due to this approach, data synchronisation and storage
becomes safe and convenient as never before
-
8/9/2019 PTM-3 0-Brochure-ENU-v23.pdf
10/12
Ordering information and compatible hardware
Licensing of Primary Test Manager (PTM)
10
included optional not included
PTM Standard
(no licence required)
PTM Advanced
Order No. XXXXXX X
PF/DF & Cap Testing with your CPC 100
using the manual control mode*
Mandatory license to operate your CPC 100
using the guided workflow*
Guided workflow
Manuel control mode
Tailormade test plans
Reporting
Attachements
Automatic assessment
Graphical comparison
PTM database
Modul:Data Synch via server(Order No. VE...)
-
8/9/2019 PTM-3 0-Brochure-ENU-v23.pdf
11/12
Technical data
PC requirements
Min. hardware Pentium 2 or better,
min. 2 GB RAM, DVD drive
Inter face Ethernet Net work Inter face Card (NIC)
Operating System Windows XP with SP 3,
Windows Vista,
Windows 7 32-bit and 64-bit, or
Windows 8 and 8.1
Installed Software Microsoft Office 2010, Office 2007 or Office 2003
+ CP TD1
Combined with the CPC 100, the
CP TD1 measures the capacitance
and the power factor / dissipation
factor with laboratory precision
even in environments experiencing
strong interference.
CPC 100
The CPC 100 is a revolutionary all-in-one
test system for substation commissioning
and maintenance.
It facilitates extensive testing on all
primary power apparatus, such as
power transformers, current and voltage
transformers, grounding systems, lines
and cables, as well as circuit breakers.
11
Server requirements
Supported Versions SQL Server 2008 SP3 and later
SQL Server 2008R2 SP1 and later
Min. hardware min. 1 GHz CPU, min. 1 GB RAM,1 GB for SQL server installation on hard disk
-
8/9/2019 PTM-3 0-Brochure-ENU-v23.pdf
12/12
Subject to change without notice.www.omicron.at| www.omicronusa.com
For more information, additional literature,and detailed contact information of ourworldwide offices please visit our website.
OMICRON is an international company serving the electrical power industry with
innovative testing and diagnostic solutions. The application of OMICRON products
allows users to assess the condition of the primary and secondary equipment on
their systems with complete confidence. Services offered in the area of consulting,
commissioning, testing, diagnosis and training make the product range complete.
Customers in more than 140 countries rely on the companys ability to supply leading-
edge technology of excellent quality. Service centers on all continents provide a broad
base of knowledge and extraordinary customer support. All of this together with ourstrong network of sales partners is what has made our company a market leader in the
electrical power industry.
OMICRON LXXXX, August 2013
http://www.omicron.at/http://www.omicronusa.com/http://www.omicronusa.com/http://www.omicron.at/