PSD_POWER SUPPLY UNIT.pdf
1
Muir Matheson Ltd Muir Matheson Ltd Muir Matheson Ltd Muir Matheson Ltd Aberlan House, Woodburn Road, Blackburn Industrial Estate, Aberdeen AB21 0RX UNITED KINGDOM T: +44 (0) 1224 791222 F: +44 (0) 1224 791555 E: [email protected] DC Power Supply Unit The DC power supply unit is 19" rack mountable The DC power supply unit is 19" rack mountable - 2U height 2U height panel for housing all system DC power supplies. The mains panel for housing all system DC power supplies. The mains (typically 240v a.c.) input is fused and passes through a filtered (typically 240v a.c.) input is fused and passes through a filtered IEC unit and main illuminated isolation switch before terminating IEC unit and main illuminated isolation switch before terminating on SAK2.5 screw terminals. The mains power is then distributed on SAK2.5 screw terminals. The mains power is then distributed via a front panel mounted illuminated switch allowing each DC via a front panel mounted illuminated switch allowing each DC power supply to be individually isolated. The DC power supplies power supply to be individually isolated. The DC power supplies differ from one application to another and are dependant on indi- differ from one application to another and are dependant on indi- vidual sensor power requirements. The output from the power vidual sensor power requirements. The output from the power supplies is then connected to rack wiring through a rear panel supplies is then connected to rack wiring through a rear panel mounted plug and socket assembly. mounted plug and socket assembly. Unit Dimensions Unit Dimensions Front panel finish Front panel finish Maximum number of Maximum number of PSU’s PSU’s Connector type Connector type Power source Power source Output power Output power 19” rack (2U height)482(W) x 350(D) x 89(H) Aluminium Up to 5 power supplies (dependant on type) 3 pin socket using a screw lock fixing to hold cables in position 120v or 240v A.C. ±10% Various - output power is specifically designed for individual sensor re- quirements.
-
Upload
drazyck-slimani -
Category
Documents
-
view
9 -
download
1
Transcript of PSD_POWER SUPPLY UNIT.pdf
Muir Matheson LtdMuir Matheson LtdMuir Matheson LtdMuir Matheson Ltd Aberlan House, Woodburn Road, Blackburn Industrial Estate,
Aberdeen AB21 0RX
UNITED KINGDOM T: +44 (0) 1224 791222 F: +44 (0) 1224 791555
DC Power Supply Unit
The DC power supply unit is 19" rack mountable The DC power supply unit is 19" rack mountable -- 2U height 2U height
panel for housing all system DC power supplies. The mains panel for housing all system DC power supplies. The mains
(typically 240v a.c.) input is fused and passes through a filtered (typically 240v a.c.) input is fused and passes through a filtered
IEC unit and main illuminated isolation switch before terminating IEC unit and main illuminated isolation switch before terminating
on SAK2.5 screw terminals. The mains power is then distributed on SAK2.5 screw terminals. The mains power is then distributed
via a front panel mounted illuminated switch allowing each DC via a front panel mounted illuminated switch allowing each DC
power supply to be individually isolated. The DC power supplies power supply to be individually isolated. The DC power supplies
differ from one application to another and are dependant on indi-differ from one application to another and are dependant on indi-
vidual sensor power requirements. The output from the power vidual sensor power requirements. The output from the power
supplies is then connected to rack wiring through a rear panel supplies is then connected to rack wiring through a rear panel
mounted plug and socket assembly.mounted plug and socket assembly.
Unit DimensionsUnit Dimensions
Front panel finishFront panel finish
Maximum number of Maximum number of
PSU’sPSU’s
Connector typeConnector type
Power sourcePower source
Output powerOutput power
19” rack (2U height)482(W) x 350(D) x 89(H)
Aluminium
Up to 5 power supplies (dependant on type)
3 pin socket using a screw lock fixing to hold cables in position
120v or 240v A.C. ±10%
Various - output power is specifically designed for individual sensor re-
quirements.
