Oil Field Edition - Squarespacestatic1.squarespace.com/.../1422996294460/OilfieldFinalPrint.pdf ·...
Transcript of Oil Field Edition - Squarespacestatic1.squarespace.com/.../1422996294460/OilfieldFinalPrint.pdf ·...
DNP Americas | 281-388-0253 | Fax 281-388-1902 | www.dnpamericas.com2
Flat Face Screw Type CouplingsConnectable Under Pressure
PVT4 SeriesFeatures and Benefits • A non-interchangeable upgrade to the FSI Series
• High Tech Z-786 Anti-Corrosion plating salt spray tested for 700 hrs before any appearance of surface red rust
• Slimmer design than FSI with no loss in flow rate
• High working pressures
• Seal is blowout resistant to 5,000 PSI when connecting or disconnecting with residual pressure
• Exceeds 1,000,000 impulse cycles
• Flat face design eliminates spillage upon disconnection
• Thread to connect style coupling eliminates brinneling issues
• Heavy Duty Hex Nut
• Standard Threads: NPT, SAE, BSPP, DIN, Code 62
Applications • Used in a wide range of industrial markets where connecting and disconnecting of hydraulic circuits is needed
• High pressure, low pressure drop and high impulse applications
• Oilfield: drilling rigs, oilfield service and drilling equipment, cranes, heavy equipment, hammer attachments and much more
Notes Aluminum caps and plugs play a crucial role in extending the life of the coupling set. Caps and Plugs are available in an assortment of colors.
Body Size
Thread Size
Working Pressure
(PSI)
Burst Pressure
(PSI)
Flow @ 14.5 PSID
(GPM)
Max Flow(GPM)
Max Connect Pressure
(PSI)
Fluid Spillage(CC)
1/4” 1/4” 9,000 27,550 3.17 6.34 5,000 .0083/8” 3/8” 6,500 20,300 6.08 12.15 5,000 .0101/2” 1/2” 6,500 20,300 12 24 5,000 .0123/4” 3/4” 6,500 20,300 20 40 5,000 .0151” 1” 6,200 20,300 26.5 53 5,000 .020
1-1/4” 1” 6,200 20,300 50 75 5,000 .0301-1/4” 1-1/4” 6,200 20,300 50 75 5,000 .030*1-3/8” 1-1/4” 6,000 20,300 70 125 5,000 .0401-1/2” 1-1/2” 5,700 20,300 100 185 5,000 .050
2” 2” 5,700 20,300 200 265 5,000 .100
Key Note: PVT4 22-20 is a DNP Americas exclusive size
DNP Americas | 281-388-0253 | Fax 281-388-1902 | www.dnpamericas.com 3
316- Stainless Steel
PVT4- Stainless SteelFeatures and Benefits • PVT4-SS is the ultimate coupling for the offshore oil and gas market
• 316 SS material for ultimate corrosion resistance
• Slim design makes for easy plumbing in tight spaces with no loss in flow rate
• High working pressures
• Connects and disconnects by hand up to 4,000 PSI
• Seal is blowout resistant to 4,000 PSI when connecting or disconnecting with residual pressure
• Exceeds 1,000,000 impulse cycles
• Flat face design eliminates spillage upon disconnection
• Thread to connect style coupling eliminates brinneling issues
• Heavy Duty Hex Nut
• Standard Threads: NPT, SAE, BSPP, DIN, Code 62
Applications
• Offshore and marine industry: drill ships, FPSO, oilfield service and drilling equipment, rig cranes, winches , platforms, offshore salvage and demolition equipment
• High pressure, low pressure drop, high impulse applications
• Used in a wide range of industrial markets where connecting and disconnecting of hydraulic circuits is needed
Notes PVT4 Polypropylene cap and plugs play a crucial role in the life of the coupling sets. Caps and plugs are available in black.
Body SizeWorking Pressure
(PSI)
Burst Pressure
(PSI)
Flow @ 14.5 PSID
(GPM)
Max Flow(GPM)
Max Connect Pressure
(PSI)
Fluid Spillage(CC)
1/4” 5,000 37,700 3.17 6.34 4,000 .0083/8” 5,000 27,550 6.08 12.15 4,000 .0101/2” 5,000 23,200 12 24 4,000 .0123/4” 5,000 20,300 20 40 4,000 .0151” 5,000 20,300 26.5 53 4,000 .020
1-1/4” 4,000 14,500 50 75 4,000 .0301-1/2” 3,500 8,750 100 185 3,500 .050
2” 3,000 7,500 200 265 3,000 .100
DNP Americas | 281-388-0253 | Fax 281-388-1902 | www.dnpamericas.com4
FSI SeriesFeatures and Benefits • High Tech Z-786 Anti-Corrosion plating salt spray tested for 700 hrs before any appearance of surface red rust
• High working pressures
• Connects and disconnects by hand up to 4,400 PSI
• Seal blowout resistant to 4,400 PSI when connecting or disconnecting with residual pressure
• Exceeds 1,000,000 impulse cycles
• Flat face design eliminates spillage upon disconnection
• Thread to connect style coupling eliminates brinneling issues
• Heavy Duty Hex Nut
• Standard Threads: NPT, SAE, BSPP, DIN, Code 62
* Interchangeable with Stucchi VEP
Applications • FSI series couplings are used in a wide range of industrial markets when connecting and disconnecting is needed
• High pressure, low pressure drop and high impulse applications
• Drilling rigs, oilfield services, drilling equipment, cranes, heavy equipment, hammer attachments and much more
Notes FSI aluminum cap and plugs with wire attachments play a crucial role in the life of the coupling sets. Caps and plugs come in an assortment of colors.
Body SizeWorking Pressure
(PSI)
Burst Pressure
(PSI)
Flow @ 14.5 PSID
(GPM)
Max Flow(GPM)
Max Connect Pressure
(PSI)
Fluid Spillage(CC)
1/4” 9,000 27,550 3.17 6.34 4,400 .0083/8” 6,500 20,300 6.08 12.15 4,400 .0101/2” 6,500 20,300 12 24 4,400 .0123/4” 6,500 20,300 20 40 4,400 .0151” 6,200 20,300 26.5 53 4,400 .020
1-1/4” 6,200 20,300 50 75 4,400 .0301-1/2” 5,700 20,300 100 185 4,400 .050
2” 5,700 17,400 200 265 4,400 .100
Flat Face Screw Type CouplingsConnectable Under Pressure
DNP Americas | 281-388-0253 | Fax 281-388-1902 | www.dnpamericas.com 5
FF-HPG SeriesFeatures and Benefits • ISO 16028- Interchanges with any ISO 16028 quick disconnect
• High working pressures
• Corrosion resistant grey nickel plating
• Salt spray tested for 400 hours
• Auto-rotate sleeve lock to prevent accidental disconnection
• Flat face design eliminates spillage upon disconnection
• Heat treated components prevent brinneling
• Standard Threads: NPT, SAE, BSPP, JIC, JIC Bulkhead, DIN, DIN Bulkhead, ORFS, ORFS Bulkhead
Applications • All types of markets where flat face, non- spill couplings are a must
• Skid steers, skid steer attachments, mobile construction mini excavators, AG equipment, forestry, and much more
Body SizeWorking Pressure
(PSI)
Burst Pressure
(PSI)
Flow @ 14.5 PSID
(GPM)
Max Flow(GPM)
Max Connect Pressure
(PSI)
Fluid Spillage(CC)
1/4” 7,350 27,550 3.17 6.34 Not Allowed .008
3/8” 6,600 23,200 6.08 12.15 Not Allowed .010
1/2” 6,600 24,650 12 24 Not Allowed .012
5/8” 6,600 21,750 20 40 Not Allowed .015
3/4” 6,100 26,100 26.5 53 Not Allowed .020
1” 6,100 21,750 50 75 Not Allowed .030
ISO 16028 Flat Face
DNP Americas | 281-388-0253 | Fax 281-388-1902 | www.dnpamericas.com6
VVS-Stainless Steel SeriesFeatures and Benefits • 316 SS material for ultimate corrosion resistance
• High working pressures
• Low pressure drop
• Connect under pressure up to 3,000 PSI
• Thread to connect style coupling eliminates brinneling issues
• Standard Threads: NPT and BSPPApplications • Used in a wide range of industrial markets where connecting and disconnecting of hydraulic circuits is needed
• Offshore and Marine: drill ships, FPSO, oilfield service and drilling equipment, rig cranes, winches, platforms, offshore salvage and demolition equipment, wireline, grease injection, sour gas
• High pressure, low pressure drop and high impulse applications
Body SizeWorking Pressure
(PSI)
Burst Pressure
(PSI)
Flow @ 14.5 PSID
(GPM)
Max Flow(GPM)
Max Connect Pressure
(PSI)
Fluid Spillage(CC)
1/4” 15,000 53,650 1.59 3.17 3,000 .53/8” 12,500 37,700 6.08 10 3,000 1.91/2” 12,000 36,250 12 18.5 3,000 2.73/4” 10,000 34,800 28 30 3,000 9.31” 7,250 21,750 50 50 3,000 16
1-1/4” 5,000 14,500 76 95 3,000 301-1/2” 5,000 13,050 100 206 3,000 54
2” 2,900 7,250 200 265 2,500 120
High Pressure Screw Type Coupling316-Stainless Steel
DNP Americas | 281-388-0253 | Fax 281-388-1902 | www.dnpamericas.com 7
VIV1 SeriesFeatures and Benefits • Large bore coupling
• High flow rates up to 525 GPM
• Working pressures from 2,200 to 3,000 PSI
• Can connect under residual pressure
• Zn-Fe (CR 111) with brass hex sleeve
• Thread to connect style coupling eliminates brinneling issues
• Standard Threads: NPT and BSPP
Applications • Hydraulic return lines and medium pressure lines
• Low pressure diesel supply lines
• Applications needing large bore couplings with high flow rates
High Flow Screw Type Coupling
Body SizeWorking Pressure
(PSI)
Burst Pressure
(PSI)
Flow @ 14.5 PSID
(GPM)
Max Flow(GPM)
Max Connect Pressure
(PSI)
1-1/4” 3,000 9,280 77 127 Residual Pressure
1-1/2” 3,000 8,120 100 185 Residual Pressure
2” 2,900 7,250 200 265 Residual Pressure
2-1/2” 2,900 7,250 225 300 Residual Pressure
3” 2,200 5,500 300 525 Residual Pressure
DNP Americas | 281-388-0253 | Fax 281-388-1902 | www.dnpamericas.com8
FFK SeriesFeatures and Benefits • ISO 16028 - Interchanges with any ISO 16028 quick disconnect
• Connect under residual pressure up to 3,675 PSI
• High working pressures - 6,100 to 7,350 PSI
• Flat faces non-spill designs
• Material - high resistance steel
• Plating: corrosion resistant Zn-Fe (CR 111) Plating
• Standard Threads: NPT, SAE, BSPP, JIC, JIC Bulkhead, DIN, DIN Bulkhead, ORFS, ORFS Bulkhead
Applications • Applications where residual pressure can become trapped in hydraulic lines • Applications where non-spill couplings are a must
• Skid steers, skid steer attachments, mobile construction, mini excavators, AG equipment, forestry and much more
ISO 16028 / Connect Under Pressure Nipple
Body SizeWorking Pressure
(PSI)
Burst Pressure
(PSI)
Flow @ 14.5 PSID
(GPM)
Max Flow(GPM)
Max Connect Pressure
(PSI)
Fluid Spillage(CC)
1/4” 7,350 27,550 3.17 6.34 3,675 .008
3/8” 6,600 23,200 6.08 12.15 3,675 .010
1/2” 6,600 24,650 12 24 3,675 .012
5/8” 6,600 21,750 20 40 3,675 .015
3/4” 6,100 26,100 26.5 53 3,675 .020
1” 6,100 21,750 50 75 3,675 .030
DNP Americas | 281-388-0253 | Fax 281-388-1902 | www.dnpamericas.com 9
PSQ Series
Features and Benefits • Locking lever with safety device to prevent accidental connection • Connect under residual pressure capability working pressures up to 5,000 PSI
• Guide pins prevent misalignment and misconnection
• Material: steel, aluminum and stainless
• Plating: corrosion resistant Zn-Fe (CR 111) Plating
• Able to connect multiple lines with the single pull of a lever
• Hydraulic pneumatic - electric connections
Applications • Applications where speed of connection and rig up is critical • Applications where cross connection of lines cannot occur
• Agricultural market, oil and gas market, construction market, industrial market, transport and mobile equipment market
Multi-Coupling Plates
DNP Americas | 281-388-0253 | Fax 281-388-1902 | www.dnpamericas.com10
Oil Field Wing Style Coupling
VFF-HD Series
VFF Series
Features and Benefits • Wing style screw to connect style
• High working pressure
• High flow rate
• Heavy duty design
• Heavy duty acme threads
Applications
• VFF-HD has a universal design that can be used in any industry
• Used frequently in the oilfield applications
• Applications needing high working pressures and high flow rates
• Coiled tubing units, snubbing units, power swivels, and much more
Features and Benefits • Wing style screw to connect style
• 3/4” to 1 1/2” body sizes
• Brass body
• Connected or disconnected with residual pressure
Applications
• Used frequently in oilfield applications
• Universal design for interchangeability
DNP Americas | 281-388-0253 | Fax 281-388-1902 | www.dnpamericas.com 11
HPI Series
HPI Series
Features and Benefits • High pressure
• 316 stainless steel body with brass sleeve
• Screw to connect style
• Plastic cap and plug are included with couplings
• 1/4” size only
Applications • High pressure gauges
• Hydraulics