WIRTH Oilfield Drilling Equipment - Catalogue- 06-04 NEU
Transcript of WIRTH Oilfield Drilling Equipment - Catalogue- 06-04 NEU
Oilfield Drilling Equipment
Your business is theexploration of oil and gas,our job is to support yourproductivity.
Since 1895, the foundation year of the WIRTHcompany, there has been a close partnershipbetween WIRTH GmbH and the oil and naturalgas producing industry. Progressive techno-logy in manufacturing of drilling rigs anddrilling tools as well as corresponding equip-ment have guaranteed continuous relationshipto this industry until today. WIRTH productsare in operation throughout the world,convincing through their performance andefficiency.
The name WIRTH is to the trade expert a syno-nym for innovation, quality and endurance ingreat variety.
WIRTH stands for drilling with advanced technology.WIRTH fulfill the API requirements for oilfield equipment and is also certified acc. to DIN EN ISO 9001.
Certified by
DIN EN ISO 9001Reg. No. 133
Innovation for increase of drillingefficiency.
static loadcapacitiy
(metric tons)short tons
TypeE = electricH = hydraulic
speedmax.rpm
torquemax.kNm
size(mm)
inchesinsert tools
W(mm)
inches
L(mm)
inches
H(mm)
inches
weightincl. adapter
(kg) Ibs
RTSS 60 1/2“-H
RTSS 49 1/2“-E
RTSS 49 1/2“-H
RTSS 37 1/2“-E
RTSS 37 1/2“-H
RTSS 27 1/2“-H
(907)1000
(726)800
(726)800
(590)650
(590)650
(454)500
(1536.70)60.50
(1257.30)49.50
(1257.30)49.50
(952.50)37.50
(952.50)37.50
(698.50)27.50
(3230)127.16
(2740)107.87
(2790)110
(2228)87.72
(2500)98.4
(2050)80.7
(2540)100
(2150)84.64
(2185)86
(1840)72.44
(1900)74.8
(1630)64.17
(965)38
(835)32.87
(790)31.1
(755)29.72
(790)31.1
(790)31.1
(16000)35280
(11900)26210
(10500)23152
(7700)16960
(8500)18740
(6000)13230
split adapter to 37 1/2“ adapter 60 1/2“– 49 1/2“
master bushing
split adapter to 37 1/2“master bushing
split adapter to 37 1/2“master bushing
master bushing
master bushing
master bushing
40
270
50
300
50
50
55
41
45
34
38
25
Rotary tableRTSS 491/2“-H
Rotary tableRTSS 601/2“-H
y High performance and variable speedy Less weight and reduced skid sizey Hydr. operated locking devicey Adapter rings to reduce to 371/2“
and 491/2“
Rotary tableshydraulically or electrically driven
Gear-driven drawworkshave created a new performance standard
Gear-driven means:y high performancey high availabilityy less weighty less noise andy less vibration
For more than 50 years chaindriven drawworks have been the state of the art – now theyhave been superseded by evenbetter ones. The essential advantages are:y Four quadrant drive modey Higher safetyy Higher life-time and endurancey Higher speeds by use of a
frequency-controlled AC-motory Integrated autodrillery Compact design with a width of
only 2.50 - 3.50 my Drive options: DC, AC, hydraulicy Full material traceability is
standard
Main features of the standard Feed OffControl System, 26 kW:AC frequencly controlled drive
Optional Feed Off Control System 45 kW:y max. lowering or hoisting speed up to 75 m/hy max. hook load up to 520 t
Drawworks completely containerized
Drawworks GH 2500 EG-DClong version
Benefits of the WIRTHFeed Off Control System:y Reduces wear of bity Achieves optimum rate
of penetrationy Maximises drilling
efficiencyy Smooth block control for
safetyy Minimising downtime
for semi sub operationy Redundancy for the
SCR-DRIVEy Automatic drilling
operation
Drawworks
Drawworkswith 4-Q-Drive type
MULTI-SPEED
GH 1250 EGDC-LV
GH 1500 EGAC-SV
GH 2000 EGAC-LV
GH 2000 EGAC-SV
GH 2500 EGDC-LV
GH 2500 EGDC-SV
GH 2500 EGAC-SV
Power rating HP
Eddy current Baylorbrake type
Hook load kN
Ibs x 1000
max. hook m/sspeed ft/s
Autodriller kNhook load Ibs x 1000
Autodriller m/hspeed ft/h
length mm
Dimensions with mm
height mm
Weight t
1250
6032
2776
624
8-lines
1.81
5.9
1447
325
95
311
8200
2500
2400
35
2000
7040/7838
4536 5189
1019 1166
12-lines 14-lines
1.54 1.32
5.0 4.3
2742 3138
616 705
63 53
206 174
9500
3000
2450
55/57
1500
6032
2961
665
8-lines
1.81
5.9
1447
325
95
311
� 7200
� 3500
� 2350
� 38
2000
7040/7838
4536 5189
1019 1166
12-lines 14-lines
1.54 1.32
5.0 4.3
2742 3138
616 705
63 53
206 174
7800
3500
2400
55/57
2500
7040
4766 5611
1067 1261
10-lines 12-lines
1.73 1.44
5.6 4.7
2680 3160
602 710
66 55
216 180
9100
2500
2400
50
2500
7040/7838
4766 5611
1067 1261
10-lines 12-lines
1.73 1.44
5.6 4.7
2490 2930
560 658
70 58
230 190
7800
3500
2400
55/57
2500
7040/7838
5248 6004
1179 1349
12-lines 14-lines
1.54 1.32
5.0 4.3
2742 3138
616 705
63 53
206 174
7800
3500
2400
55/57
Drawworkswith 4-Q-Drive type
SINGLE-SPEED TWO-SPEED
GH 1500 EGAC-1G
GH 2800 EGDC-2G
GH 3000 EGAC-2G
GH 3000 EGAC-1G
GH 6000 EGAC-1G
Power rating HP
Eddy current Baylorbrake type
Hook load kN
Ibs x 1000
max. hook m/sspeed ft/s
length mm
Dimensions width mm
height mm
Weight t
3000
7838
2815 3449
632 774
8-lines 10-lines
0.99 0.79
3.22 2.57
5650
3300
2750
31
6000
—
6900 8120
1550 1825
10-lines 12-lines
1.29 1.075
4.23 3.52
� 9000
� 3300
� 2750
� 56
1500
6032
1720 2025
386 455
10-lines 12-lines
1.29 1.075
4.23 3.52
5350
3300
2750
� 27
2500
7040/7838
4349 4975
977 1118
12-lines 14-lines
1.24 1.06
4.06 3.05
7200
3500
2500
� 51
3000
7838
5558 6360
1249 1429
12-lines 14-lines
1.24 1.06
4.06 3.05
7200
3500
2500
� 51
Drawworks
Drawworkswith 4-Q-Drive type
MULTI-SPEED
GH 3000 EGAC-LV
GH 3000 EGAC-SV
GH 4000 EGDC-SV
GH 4500 EGAC-LV
GH 4500 EGAC-SV
GH 5000 EGDC-SV
GH 6000 EGAC-SV
Power rating HP
Eddy current Baylorbrake type
Hook load kN
Ibs x 1000
max. hook m/sspeed ft/s
Autodriller kNhook load Ibs x 1000
Autodriller m/hspeed ft/h
length mm
Dimensions with mm
height mm
Weight t
5000
7838
9328
2097
14-lines
1.7
5.5
4851
1090
69
226
� 8900
� 4600
� 3000
� 95
6000
7838
11900
2675
14-lines
1.7
5.5
4851
1090
69
226
� 9400
� 4800
� 3200
� 100
3750
7838
6951 7953
1562 1787
12-lines 14-lines
1.75 1.5
5.7 4.9
3607 4127
810 927
71 60
233 197
� 8900
� 4600
� 3000
� 87
4500
7838
7816 8942
1756 2010
12-lines 14-lines
1.98 1.7
6.5 5.5
3175 3632
713 816
80 69
262 226
� 8900
� 4800
� 3000
� 87
3000
7838
6698 7663
1505 1722
12-lines 14-lines
1.54 1.32
5.0 4.3
2742 3138
616 705
63 53
206 174
9500
3000
2450
57
3000
7838
6698 7663
1505 1722
12-lines 14-lines
1.54 1.32
5.0 4.3
2742 3138
616 705
63 53
206 174
7800
3500
2400
57
4500
7838
8881 10161
1996 2283
12-lines 14-lines
1.75 1.5
5.7 4.9
3850 4490
865 1009
71 60
233 197
11300
3200
4600
87
New GenerationMulti Speed Drawworks GH 3000 EG-AC-SVshort version for interchangeability with chain driven drawworks
Single Speed Drawworks GH 3000 EG-AC-1G
Two Speed Drawworks
GH 2800 EG-DC-2G
Main features of WIRTH pumpsy Full material traceability as standardy Optimal smoothness of operationy Pump drive units for permanent-load
operation, with a high degree of stabilityy Power-end frame of fabricated steel y Fluid ends in stainless steel (optional)
for increased lifetimey Gear wheels and drive shaft of wear-
resistant heat treated steely A double helical toothing ensures a high
smoothness of operation and prevents theaxial load from being exerted onto thepinion shaft and crank-shaft outer bearings
y Crank-shaft of heat-treated cast steel with a high degree of rigidity
y Material combination between crosshead and slide ways in accordance with the most recent state of technology
y Pressure circulation lubrication system for all moving parts
y High lifetime wearpartsy Surveillance and control elements for early
recognition of failuresy Drive options: AC, DC
Triplex Mud Pump TPK 71/2“ x 14“/2200
AC driven, single top mounted AC motor with double extended shaft
to achive 85 dBa
y less noisey less maintenance
y less expensive
Triplex Mud PumpTPK 71/2“x 12“/2000
DC driven,rear mounted
New Generation
Triplex mud pumpshigh power for high performance
A speciality of the WIRTH pumps arehydraulic auxiliary tools which havebeen designed by WIRTH for easy hand-ling and quicker exchange of wearparts.WIRTH patents from already 1967 coverthese technical advantages.Since 1959 the valve seats of WIRTH-pumps can be pressed out hydrauli-
cally. For that purpose,hydraulic oil is pressedin between housingand valve seat by me-ans of a manual pump. O-rings provided at theupper and the lowerend of the conical seatensure absolutetightness of the seatsurfaces.
TPK7 1/4“ x 8 1/2“
800-1000Mud pumps
TPK7“ x 10“
1300
TPK7 1/2“ x 12“
1600
TPK7 1/2“ x 12“
2000
TPK7 1/2“ x 14“
2200
Discharge flow max. l/minUS gall. p.m.
3 043804
3 126826
3 126826
3 344884
Operating pressure max. barpsi
3455 000
3455 000
5177 500
5177 500
Input power requirement kWHP
9701 300
1 1931 600
1 4922 000
1 6402 200
Input number of revolution min-1 584 475 475 436
No. of strokes max. min-1 150 120 120 110
Weight without oil kglbs
22 50049 613
31 00068 355
32 00070 560
33 00072 750
Dimensions A mminch
4 350171.65
4 970195.67
4 970195.67
5 200204.72
B mminch
1 80070.87
2 30090.55
2 30090.55
2 30090.55
C mminch
2 52099.21
2 720107.09
2 800110.23
2 800110.23
D mminch
1 51059.45
1 81571.45
1 81571.45
1 85072.83
E mminch
1 48358.39
1 76569.48
1 76569.48
1 76569.48
F mminch
2 05480.87
2 36593.11
2 37593.50
2 555100.59
G mminch
1 23048.42
1 31051.57
1 31051.57
1 31051.57
H mminch
1 02040.15
1 08042.52
1 09042.91
1 09042.91
2 762730
3455 000
597-746800-1 000
626
160
15 00033 069
3 775148.62
1 64064.56
2 34792.40
1 25049.21
1 37854.25
1 930 75.98
1 06541.93
92036.22
Triplex mud pumpshydraulical auxiliary tools, another reason for deciding for WIRTH pumps!
WIRTH Rotary swivel compl. with bailwith double adapter sub 75/8“ to 6 5/8“ or to 7 5/8“,API regular LH-connection fittedwith replacement wash pipe assyand gooseneck and with uniboltconnection, 4“ API L.P. thread.
Rotary Swivel
Dead load capacity short tonsDynamic capacity at 100 RPM short tons
Lenght A (mm) inchesWidth B (mm) inchesHook clearance (mm) inchesWash pipe I.D.
Bail pin dia.
Operating pressure rate (bar) psiTest pressure rate (bar) psi
Weight kg
RSS 350/400
350350
(2490)(1150)(500)
3“ for 5000 psi
T.B.A.
(350) 5000(525) 7500
� 2600
RSS 500
500500
(2690) 105.91(1448) 57
(500) 19.693“ for 5000 psi
5 1/2“
(350) 5000(525) 7500
� 3200
RSS 650
650500
(2845) 112(1448) 57
(525) 20.673“ for 5000 psi or
4“ for 7500 psi
5 1/2“
(525) 7500(790) 11400
� 3300
RSS 750
750500
(2500) 98.5(1500) 59
T.B.A.4“ for 7500 psi
Bolt Ø for links 6 1/2“
(525) 7500(790) 11400
� 3500
WIRTH fulfill the API 8C requirementswith regard to the welded design of swivel housing.
Rotary swivelsa further consequent development
Innovation for increase of drilling efficiency
WIRTH MASCHINEN- UND BOHRGERÄTE-FABRIK GMBH · KÖLNER STR. 71-73 · D-41812 ERKELENZ · PHONE (0 24 31) 83-0 · FAX (0 24 31) 83 267http://www.wirth-europe-com · e-mail: [email protected]
OILFIELD EQUIPMENT · PERSON TO CONTACT: GENERAL MANAGER: PETER HEINRICHS
B 2
66
e6.
0504
.100
0 · T
ech
nic
al m
od
ific
atio
ns
wit
ho
ut
no
tifi
cati
on
GROUP