NA949
Transcript of NA949
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S., call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: This product is sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of this product.An MSDS as well as additional information on BASFurethane chemicals may be obtained by telephoningBASF Corporation, Urethane Customer Service at (877)297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Urethanes
Important: While the descriptions, designs, data andinformation contained herein are presented in good faith andbelieved to be accurate, it is provided for your guidance only.Because many factors may affect processing or applica-tion/use, we recommend that you make tests to determinethe suitability of a product for your particular purpose prior touse. NO WARRANTIES OF ANY KIND, EITHER EX-PRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, ARE MADE REGARDING PRODUCTSDESCRIBED OR DESIGNS, DATA OR INFORMATIONSET FORTH, OR THAT THE PRODUCTS, DESIGNS,DATA OR INFORMATION MAY BE USED WITHOUTINFRINGING THE INTELLECTUAL PROPERTY RIGHTSOF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS,INFORMATION, DATA OR DESIGNS PROVIDED BECONSIDERED A PART OF OUR TERMS AND CONDI-TIONS OF SALE. Further, you expressly understand andagree that the descriptions, designs, data, and informationfurnished by BASF hereunder are provided gratis and BASFassumes no obligation or liability for the description,designs, data and information given or results obtained, allsuch being given and accepted at your risk.
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Shipping information: 20,000-gallon tank cars, 6,000-gallon tank trucks and 55-gallon nonreturnable steeldrums are standard.
Technical Bulletin
Typical Properties
August 2001
Nominal functionality ................................................................... 3Nominal molecular weight .......................................................... 6000Density, lbs/gal @77°F .............................................................. 8.37
122°F ............................................................. 8.22140°F ............................................................. 8.18
Viscosity, CPS @ 77°F ............................................................ 1300122°F ............................................................... 480140°F .............................................................. 330
Specific heat, BTU /lb °F ............................................................ . 0.5Thermal conductivity, BTU/hr ft 2 °F/in ....................................... 0.087Appearance......................................................................clear liquid
Pluracol® 220Specialty Polyol
Pluracol® polyol 220 is a high molecular weight, primary hydroxyl terminated polyol used in polyurethane elas-tomer and sealant formulations.
Storage and Handling: Pluracol 220 should bestored under dry conditions below 130°F.
Product SpecificationsHydroxyl number, mg KOH/gmWater, weight % maximumAcid number, maximumNa&K, ppm maximumColor, APHA maximumUnsaturation, meq/g, maximum
Method (STI)3007/3162
30623063/3161
303830573056
25.6 - 27.60.040.06
840
0.11
Value
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S., call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: This product is sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of this product.An MSDS as well as additional information on BASFurethane chemicals may be obtained by telephoningBASF Corporation, Urethane Customer Service at (877)297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Urethanes
Important: While the descriptions, designs, data andinformation contained herein are presented in good faith andbelieved to be accurate, it is provided for your guidance only.Because many factors may affect processing or applica-tion/use, we recommend that you make tests to determinethe suitability of a product for your particular purpose prior touse. NO WARRANTIES OF ANY KIND, EITHER EX-PRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, ARE MADE REGARDING PRODUCTSDESCRIBED OR DESIGNS, DATA OR INFORMATIONSET FORTH, OR THAT THE PRODUCTS, DESIGNS,DATA OR INFORMATION MAY BE USED WITHOUTINFRINGING THE INTELLECTUAL PROPERTY RIGHTSOF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS,INFORMATION, DATA OR DESIGNS PROVIDED BECONSIDERED A PART OF OUR TERMS AND CONDI-TIONS OF SALE. Further, you expressly understand andagree that the descriptions, designs, data, and informationfurnished by BASF hereunder are provided gratis and BASFassumes no obligation or liability for the description,designs, data and information given or results obtained, allsuch being given and accepted at your risk.
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Shipping information: 20,000-gallon tank cars, 6,000-gallon tank trucks and 55-gallon nonreturnable steeldrums are standard.
Technical Bulletin
Typical Properties
August 2001
Pluracol® polyol 355 is an amine-based tetrol of low equivalent weight with built-in catalytic activity. Because of itsunusual behavior, this polyol has found wide application in flexible foams, semi-flexible foams and rigid foams.Refrigeration, transportation, and construction applications are indicative of the industries using this polyol.
Storage and Handling: Pluracol 355 should be storedunder dry conditions below 130°F.
Nominal functionality .......................................................................4Nominal molecular weight ............................................................ 500Density, lbs/gal @80°F .............................................................. 8.62
100°F ............................................................. 8.55140°F ............................................................. 8.44
Viscosity, CPS @ 80°F ............................................................. 2700100°F ............................................................... 980140°F .............................................................. 185
Specific heat, BTU /lb °F ............................................................ . 0.5Thermal conductivity, BTU/hr ft 2 °F/in ....................................... 0.087Appearance......................................................................clear liquid
Pluracol® 355Specialty Polyol
Hydroxyl number, mg KOH/gmWater, weight % maximumColor, APHA maximum.Na&K, ppm maximum
Value Method (STI)300130623057
3049/3050
435 - 4710.058025
Product Specifications
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S., call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: This product is sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of this product.An MSDS as well as additional information on BASFurethane chemicals may be obtained by telephoningBASF Corporation, Urethane Customer Service at (877)297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Urethanes
Important: While the descriptions, designs, data andinformation contained herein are presented in good faith andbelieved to be accurate, it is provided for your guidance only.Because many factors may affect processing or applica-tion/use, we recommend that you make tests to determinethe suitability of a product for your particular purpose prior touse. NO WARRANTIES OF ANY KIND, EITHER EX-PRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, ARE MADE REGARDING PRODUCTSDESCRIBED OR DESIGNS, DATA OR INFORMATIONSET FORTH, OR THAT THE PRODUCTS, DESIGNS,DATA OR INFORMATION MAY BE USED WITHOUTINFRINGING THE INTELLECTUAL PROPERTY RIGHTSOF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS,INFORMATION, DATA OR DESIGNS PROVIDED BECONSIDERED A PART OF OUR TERMS AND CONDI-TIONS OF SALE. Further, you expressly understand andagree that the descriptions, designs, data, and informationfurnished by BASF hereunder are provided gratis and BASFassumes no obligation or liability for the description,designs, data and information given or results obtained, allsuch being given and accepted at your risk.
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Shipping information: 20,000-gallon tank cars, 6,000-gallon tank trucks and 55-gallon nonreturnable steeldrums are standard.
Technical Bulletin
Typical Properties
August 2001
Nominal functionality ......................................................................3Nominal molecular weight ......................................................... 6500Density, lbs/gal @ 77°F ............................................................. 8.49 100°F ............................................................. 8.40
140°F ............................................................. 8.25Viscosity, CPS @ 77°F ............................................................ 1370
100°F .............................................................. 790 140°F .............................................................. 375
Specific heat, BTU/lb °F ............................................................... 0.5Thermal conductivity, BTU/hr ft 2 °F/in ........................................ 0.087Appearance ....................................................................clear liquid
Pluracol® polyol 380 is a high molecular weight, primary hydroxyl terminated triol. The combination of highmolecular weight and reactivity makes Pluracol 380 useful in the preparation of elastomers and HR moldedfoams. Pluracol 380 has been formulated with a specialty inhibitor package which is not recommended forflexible slabstock foam production.
Storage and Handling: Pluracol 380 should bestored under dry conditions below 130°F.
Pluracol® 380Specialty Polyol
Product SpecificationsHydroxyl number, mg KOH/gmWater, weight % maximumAcid number, maximumNa&K, ppm maximumColor, APHA maximumUnsaturation, meq/g, maximum
Value Method (STI)3007/3162
30623063/3161
303830573056
24.0-26.00.050.01
530
0.074
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S., call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: This product is sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of this product.An MSDS as well as additional information on BASFurethane chemicals may be obtained by telephoningBASF Corporation, Urethane Customer Service at (877)297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Urethanes
Important: While the descriptions, designs, data andinformation contained herein are presented in good faith andbelieved to be accurate, it is provided for your guidance only.Because many factors may affect processing or applica-tion/use, we recommend that you make tests to determinethe suitability of a product for your particular purpose prior touse. NO WARRANTIES OF ANY KIND, EITHER EX-PRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, ARE MADE REGARDING PRODUCTSDESCRIBED OR DESIGNS, DATA OR INFORMATIONSET FORTH, OR THAT THE PRODUCTS, DESIGNS,DATA OR INFORMATION MAY BE USED WITHOUTINFRINGING THE INTELLECTUAL PROPERTY RIGHTSOF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS,INFORMATION, DATA OR DESIGNS PROVIDED BECONSIDERED A PART OF OUR TERMS AND CONDI-TIONS OF SALE. Further, you expressly understand andagree that the descriptions, designs, data, and informationfurnished by BASF hereunder are provided gratis and BASFassumes no obligation or liability for the description,designs, data and information given or results obtained, allsuch being given and accepted at your risk.
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Shipping information: 20,000-gallon tank cars, 6,000-gallon tank trucks and 55-gallon nonreturnable steeldrums are standard.
Technical Bulletin
Typical Properties
August 2001
Pluracol® 593Specialty Polyol
Pluracol® polyol 593 is a 3650 molecular weight polyol containing a high proportion of ethylene oxide in the polyolchain. Pluracol 593 can be used in the formulation for hydrophillic flexible slabstock foams. Pluracol 593 isincompatible with other slab polyols and will separate from other polyols unless continuously agitated.
Storage and Handling: Pluracol 593 should bestored under dry conditions below 130°F.
Nominal functionality ..................................................................... 3Nominal molecular weight .......................................................... 3650Density, lbs/gal @77°F .............................................................. 9.10
110°F ............................................................. 9.03150°F ............................................................. 8.90
Viscosity, CPS @ 77°F ............................................................ 1340110°F ............................................................... 400150°F .............................................................. 183
Specific heat, BTU /lb °F ............................................................ . 0.5Thermal conductivity, BTU/hr ft 2 °F/in ....................................... 0.087Appearance............................................................ water white liquid
Value Method (STI)Product SpecificationsHydroxyl number, mg KOH/gmWater, weight % maximumAcid number, maximumNa&K, ppm maximumColor, APHA maximumUnsaturation, meq/g, maximum
44.0 - 47.00.050.01
530
0.09
3007/31623062
3063/3161303830573056
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S., call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: This product is sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of this product.An MSDS as well as additional information on BASFurethane chemicals may be obtained by telephoningBASF Corporation, Urethane Customer Service at (877)297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Urethanes
Important: While the descriptions, designs, data andinformation contained herein are presented in good faith andbelieved to be accurate, it is provided for your guidance only.Because many factors may affect processing or applica-tion/use, we recommend that you make tests to determinethe suitability of a product for your particular purpose prior touse. NO WARRANTIES OF ANY KIND, EITHER EX-PRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, ARE MADE REGARDING PRODUCTSDESCRIBED OR DESIGNS, DATA OR INFORMATIONSET FORTH, OR THAT THE PRODUCTS, DESIGNS,DATA OR INFORMATION MAY BE USED WITHOUTINFRINGING THE INTELLECTUAL PROPERTY RIGHTSOF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS,INFORMATION, DATA OR DESIGNS PROVIDED BECONSIDERED A PART OF OUR TERMS AND CONDI-TIONS OF SALE. Further, you expressly understand andagree that the descriptions, designs, data, and informationfurnished by BASF hereunder are provided gratis and BASFassumes no obligation or liability for the description,designs, data and information given or results obtained, allsuch being given and accepted at your risk.
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Shipping information: 20,000-gallon tank cars, 6,000-gallon tank trucks and 55-gallon nonreturnable steeldrums are standard.
Technical Bulletin
Typical Properties
August 2001
Pluracol® polyol 628 is a high molecular weight, primary hydroxyl terminated diol used in the manufacture ofpolyurethane shoe soles and fascia products. Pluracol 628 can also be used to manufacture a variety of sealantsand elastomers.
Storage and Handling: Pluracol 628 should bestored under dry conditions below 130°F.
Nominal functionality ..................................................................... 2Nominal molecular weight .......................................................... 4500Density, lbs/gal @70°F .............................................................. 8.57
100°F ............................................................. 8.45130°F ............................................................. 8.34
Viscosity, CPS @ 70°F ............................................................ 1500100°F ............................................................... 525130°F .............................................................. 270
Specific heat, BTU /lb °F ............................................................ . 0.5Thermal conductivity, BTU/hr ft 2 °F/in ....................................... 0.087Appearance..................................................................... clear liquid
Pluracol® 628Specialty Polyol
Product SpecificationsHydroxyl number, mg KOH/gmWater, weight % maximumAcid number, maximumNa&K, ppm maximumColor, APHA maximumUnsaturation, meq/g, maximum
Value Method (STI)3007/3162
30623063/3161
303830573056
24.5 - 26.50.050.01
530
0.069
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S., call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: This product is sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of this product.An MSDS as well as additional information on BASFurethane chemicals may be obtained by telephoningBASF Corporation, Urethane Customer Service at (877)297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Urethanes
Important: While the descriptions, designs, data andinformation contained herein are presented in good faith andbelieved to be accurate, it is provided for your guidance only.Because many factors may affect processing or applica-tion/use, we recommend that you make tests to determinethe suitability of a product for your particular purpose prior touse. NO WARRANTIES OF ANY KIND, EITHER EX-PRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, ARE MADE REGARDING PRODUCTSDESCRIBED OR DESIGNS, DATA OR INFORMATIONSET FORTH, OR THAT THE PRODUCTS, DESIGNS,DATA OR INFORMATION MAY BE USED WITHOUTINFRINGING THE INTELLECTUAL PROPERTY RIGHTSOF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS,INFORMATION, DATA OR DESIGNS PROVIDED BECONSIDERED A PART OF OUR TERMS AND CONDI-TIONS OF SALE. Further, you expressly understand andagree that the descriptions, designs, data, and informationfurnished by BASF hereunder are provided gratis and BASFassumes no obligation or liability for the description,designs, data and information given or results obtained, allsuch being given and accepted at your risk.
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Shipping information: 20,000-gallon tank cars, 6,000-gallon tank trucks and 55-gallon nonreturnable steeldrums are standard.
Technical Bulletin
Typical Properties
August 2001
Pluracol® 726Specialty Polyol
Storage and Handling: Pluracol 726 should bestored under dry conditions below 130°F.
Pluracol® polyol 726 is a 3000 molecular weight propylene oxide adduct of glycerine. Originally designed as aslabstock foam polyol, Pluracol 726 has found wide acceptance in specialty non-foam polyurethane applications.
Nominal functionality .................................................................. 3Nominal molecular weight .......................................................... 3000Density, lbs/gal @77°F .............................................................. 8.35
100°F ............................................................. 8.28140°F ............................................................. 8.15
Viscosity, CPS @ 77°F .............................................................. 420100°F ............................................................... 210140°F .............................................................. 110
Specific heat, BTU /lb °F ............................................................ . 0.5Thermal conductivity, BTU/hr ft 2 °F/in ....................................... 0.087Appearance..................................................................... clear liquid
Product SpecificationsHydroxyl number, mg KOH/gmWater, weight % maximumAcid number, maximumNa&K, ppm maximum
Value Method (STI)3007/3162
30623063/3161
3038
56.0 - 59.00.05
0.0155
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S., call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: This product is sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of this product.An MSDS as well as additional information on BASFurethane chemicals may be obtained by telephoningBASF Corporation, Urethane Customer Service at (877)297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Urethanes
Important: While the descriptions, designs, data andinformation contained herein are presented in good faith andbelieved to be accurate, it is provided for your guidance only.Because many factors may affect processing or applica-tion/use, we recommend that you make tests to determinethe suitability of a product for your particular purpose prior touse. NO WARRANTIES OF ANY KIND, EITHER EX-PRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, ARE MADE REGARDING PRODUCTSDESCRIBED OR DESIGNS, DATA OR INFORMATIONSET FORTH, OR THAT THE PRODUCTS, DESIGNS,DATA OR INFORMATION MAY BE USED WITHOUTINFRINGING THE INTELLECTUAL PROPERTY RIGHTSOF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS,INFORMATION, DATA OR DESIGNS PROVIDED BECONSIDERED A PART OF OUR TERMS AND CONDI-TIONS OF SALE. Further, you expressly understand andagree that the descriptions, designs, data, and informationfurnished by BASF hereunder are provided gratis and BASFassumes no obligation or liability for the description,designs, data and information given or results obtained, allsuch being given and accepted at your risk.
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Shipping information: 20,000-gallon tank cars, 6,000-gallon tank trucks and 55-gallon nonreturnable steeldrums are standard.
Technical Bulletin
Typical Properties
August 2001
Pluracol® 858Specialty Polyol
Pluracol® polyol 858 is a modiying polyol which can be used in a wide variety of applications. It can be em-ployed as a crosslinking agent for rigid foam as well as coatings and elastomers. When combined with GPseries polyols, high heat distortion resistant microcellular products can be produced.
Product Specifications
Hydroxyl number, mg KOH/gmWater, weight % maximum
9350.05
Value Method (STI)
30073062
Nominal functionality ..................................................................... 3Density, lbs/gal @77°F .............................................................. 9.37
90°F ............................................................. 9.31110°F ............................................................. 9.23
Viscosity, CPS @ 77°F ............................................................ 136090°F ............................................................... 700
110°F .............................................................. 285Appearance..................................................................... clear liquid
Storage and Handling: Pluracol 858 should be storedunder dry conditions below 130°F.
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S., call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: This product is sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of this product.An MSDS as well as additional information on BASFurethane chemicals may be obtained by telephoningBASF Corporation, Urethane Customer Service at (877)297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Urethanes
Important: While the descriptions, designs, data andinformation contained herein are presented in good faith andbelieved to be accurate, it is provided for your guidance only.Because many factors may affect processing or applica-tion/use, we recommend that you make tests to determinethe suitability of a product for your particular purpose prior touse. NO WARRANTIES OF ANY KIND, EITHER EX-PRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, ARE MADE REGARDING PRODUCTSDESCRIBED OR DESIGNS, DATA OR INFORMATIONSET FORTH, OR THAT THE PRODUCTS, DESIGNS,DATA OR INFORMATION MAY BE USED WITHOUTINFRINGING THE INTELLECTUAL PROPERTY RIGHTSOF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS,INFORMATION, DATA OR DESIGNS PROVIDED BECONSIDERED A PART OF OUR TERMS AND CONDI-TIONS OF SALE. Further, you expressly understand andagree that the descriptions, designs, data, and informationfurnished by BASF hereunder are provided gratis and BASFassumes no obligation or liability for the description,designs, data and information given or results obtained, allsuch being given and accepted at your risk.
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Shipping information: 20,000-gallon tank cars, 6,000-gallon tank trucks and 55-gallon nonreturnable steeldrums are standard.
Technical Bulletin
Typical Properties
August 2001
Pluracol® 1062Specialty Polyol
Pluracol® polyol 1062 is a high molecular weight, primary hydroxyl terminated diol used in the manufacture ofpolyurethane shoe soles and fascia products. Pluracol 1062 can also be used to manufacture a variety of sealantsand elastomers.
Nominal functionality ...................................................................... 2Nominal molecular weight .......................................................... 4000Density, lbs/gal @77°F .............................................................. 8.45
104°F ............................................................. 8.41140°F ............................................................. 8.29
Viscosity, CPS @ 77°F .............................................................. 840104°F ............................................................... 450140°F .............................................................. 195
Specific heat, BTU /lb °F ............................................................ . 0.5Thermal conductivity, BTU/hr ft 2 °F/in ....................................... 0.087Appearance......................................................................clear liquid
Storage and Handling: Pluracol 1062 should bestored under dry conditions below 130°F
Product SpecificationsHydroxyl number, mg KOH/gmWater, weight % maximumAcid number, maximumNa&K, ppm maximumColor, APHA maximumUnsaturation, meq/g, maximum
Value Method (STI)3007/3162
30623063303830573056
28.0 - 30.00.050.01
540
0.065
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S., call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: This product is sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of this product.An MSDS as well as additional information on BASFurethane chemicals may be obtained by telephoningBASF Corporation, Urethane Customer Service at (877)297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Urethanes
Important: While the descriptions, designs, data andinformation contained herein are presented in good faith andbelieved to be accurate, it is provided for your guidance only.Because many factors may affect processing or applica-tion/use, we recommend that you make tests to determinethe suitability of a product for your particular purpose prior touse. NO WARRANTIES OF ANY KIND, EITHER EX-PRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, ARE MADE REGARDING PRODUCTSDESCRIBED OR DESIGNS, DATA OR INFORMATIONSET FORTH, OR THAT THE PRODUCTS, DESIGNS,DATA OR INFORMATION MAY BE USED WITHOUTINFRINGING THE INTELLECTUAL PROPERTY RIGHTSOF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS,INFORMATION, DATA OR DESIGNS PROVIDED BECONSIDERED A PART OF OUR TERMS AND CONDI-TIONS OF SALE. Further, you expressly understand andagree that the descriptions, designs, data, and informationfurnished by BASF hereunder are provided gratis and BASFassumes no obligation or liability for the description,designs, data and information given or results obtained, allsuch being given and accepted at your risk.
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Shipping information: 20,000-gallon tank cars, 6,000-gallon tank trucks and 55-gallon nonreturnable steeldrums are standard.
Technical Bulletin
Typical Properties
August 2001
Storage and Handling: Pluracol 1123 should bestored under dry conditions below 130°F.
Nominal functionality ...................................................................... 3Nominal molecular weight .......................................................... 7000Density, lbs/gal @77°F .............................................................. 9.09
95°F ............................................................. 9.02113°F ............................................................. 8.96
Viscosity, CPS @ 77°F ............................................................. 258095°F ............................................................. 1505
113°F ............................................................... 963Specific heat, BTU /lb °F ............................................................ . 0.5Thermal conductivity, BTU/hr ft 2 °F/in ....................................... 0.087Appearance.......................................................... hazy to clear liquid
Pluracol® 1123Specialty Polyol
Pluracol® polyol 1123 is a primary terminated, high molecular weight polyether triol. The high levels of primaryhydroxyl capping makes Pluracol 1123 useful for hydrophyllic polyurethane formulations.
22.0 - 26.00.050.01
51000.03
Value Method (STI)Product SpecificationsHydroxyl number, mg KOH/gmWater, weight % maximumAcid number, maximumNa&K, ppm maximumColor, APHA maximumUnsaturation, meq/g, maximum
3007/31623062
3063/3161303830573056
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S., call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: This product is sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of this product.An MSDS as well as additional information on BASFurethane chemicals may be obtained by telephoningBASF Corporation, Urethane Customer Service at (877)297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Urethanes
Important: While the descriptions, designs, data andinformation contained herein are presented in good faith andbelieved to be accurate, it is provided for your guidance only.Because many factors may affect processing or applica-tion/use, we recommend that you make tests to determinethe suitability of a product for your particular purpose prior touse. NO WARRANTIES OF ANY KIND, EITHER EX-PRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, ARE MADE REGARDING PRODUCTSDESCRIBED OR DESIGNS, DATA OR INFORMATIONSET FORTH, OR THAT THE PRODUCTS, DESIGNS,DATA OR INFORMATION MAY BE USED WITHOUTINFRINGING THE INTELLECTUAL PROPERTY RIGHTSOF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS,INFORMATION, DATA OR DESIGNS PROVIDED BECONSIDERED A PART OF OUR TERMS AND CONDI-TIONS OF SALE. Further, you expressly understand andagree that the descriptions, designs, data, and informationfurnished by BASF hereunder are provided gratis and BASFassumes no obligation or liability for the description,designs, data and information given or results obtained, allsuch being given and accepted at your risk.
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Shipping information: 20,000-gallon tank cars, 6,000-gallon tank trucks and 55-gallon nonreturnable steeldrums are standard.
Technical Bulletin
Typical Properties
August 2001
Storage and Handling: Pluracol 1135 should bestored under dry conditions below 130°F.
Nominal functionality .......................................................................3Nominal molecular weight .......................................................... 1500Density, lbs/gal @77°F .............................................................. 8.44
95°F ............................................................. 8.38113°F ............................................................. 8.31
Viscosity, CPS @ 77°F ............................................................... 30595°F ............................................................... 167
113°F .............................................................. 102Specific heat, BTU /lb °F ............................................................ . 0.5Thermal conductivity, BTU/hr ft 2 °F/in ....................................... 0.087Appearance............................................................ water-white liquid
Pluracol® 1135iSpecialty Polyol
Pluracol® polyol 1135i is a nominal 1500 molecular weight triol. Pluracol 1135i has been prepared for applica-tions in flexible slabstock foams and polyurethane adhesive and sealants applications
Product SpecificationsHydroxyl number, mg KOH/gmWater, weight % maximumAcid number, maximumNa&K, ppm maximumColor, APHA maximumUnsaturation, meq/g, maximum
Value107 - 117
0.050.01
530
0.017
Method (STI)3007/3162
30623063/3161
303830573056
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S., call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: This product is sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of this product.An MSDS as well as additional information on BASFurethane chemicals may be obtained by telephoningBASF Corporation, Urethane Customer Service at (877)297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Urethanes
Important: While the descriptions, designs, data andinformation contained herein are presented in good faith andbelieved to be accurate, it is provided for your guidance only.Because many factors may affect processing or applica-tion/use, we recommend that you make tests to determinethe suitability of a product for your particular purpose prior touse. NO WARRANTIES OF ANY KIND, EITHER EX-PRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, ARE MADE REGARDING PRODUCTSDESCRIBED OR DESIGNS, DATA OR INFORMATIONSET FORTH, OR THAT THE PRODUCTS, DESIGNS,DATA OR INFORMATION MAY BE USED WITHOUTINFRINGING THE INTELLECTUAL PROPERTY RIGHTSOF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS,INFORMATION, DATA OR DESIGNS PROVIDED BECONSIDERED A PART OF OUR TERMS AND CONDI-TIONS OF SALE. Further, you expressly understand andagree that the descriptions, designs, data, and informationfurnished by BASF hereunder are provided gratis and BASFassumes no obligation or liability for the description,designs, data and information given or results obtained, allsuch being given and accepted at your risk.
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Shipping information: 20,000-gallon tank cars, 6,000-gallon tank trucks and 55-gallon nonreturnable steeldrums are standard.
Technical Bulletin
Typical Properties
August 2001
Pluracol® polyol 1477 is a nominal 2000 molecular weight diol. It differs from Pluracol polyol P2010 in that it isterminated with ethylene oxide which imparts a primary hydroxyl cap to the polyol. Pluracol 1477 is used forspecialty polyether applications.
Storage and Handling: Pluracol 1477 should bestored under dry conditions below 130°F.
Pluracol® 1477Specialty Polyol
Nominal functionality .......................................................................2Nominal molecular weight .......................................................... 2000Density, lbs/gal @70°F .............................................................. 8.78
100°F .............................................................. 8.68130°F .............................................................. 8.56
Viscosity, CPS @ 70°F ............................................................... 470100°F ............................................................... 205130°F ............................................................... 106
Specific heat, BTU /lb °F .............................................................. 0.5Thermal conductivity, BTU/hr ft 2 °F/in ....................................... 0.087Appearance......................................................................clear liquid
Hydroxyl number, mg KOH/gmWater, weight % maximumColor, APHA maximumAcid number, maximum
Value Method (WQTM)300730623057
3063/3161
54.5 - 57.50.0550
0.01
Product Specifications
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S., call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: This product is sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of this product.An MSDS as well as additional information on BASFurethane chemicals may be obtained by telephoningBASF Corporation, Urethane Customer Service at (877)297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Urethanes
Important: While the descriptions, designs, data andinformation contained herein are presented in good faith andbelieved to be accurate, it is provided for your guidance only.Because many factors may affect processing or applica-tion/use, we recommend that you make tests to determinethe suitability of a product for your particular purpose prior touse. NO WARRANTIES OF ANY KIND, EITHER EX-PRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, ARE MADE REGARDING PRODUCTSDESCRIBED OR DESIGNS, DATA OR INFORMATIONSET FORTH, OR THAT THE PRODUCTS, DESIGNS,DATA OR INFORMATION MAY BE USED WITHOUTINFRINGING THE INTELLECTUAL PROPERTY RIGHTSOF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS,INFORMATION, DATA OR DESIGNS PROVIDED BECONSIDERED A PART OF OUR TERMS AND CONDI-TIONS OF SALE. Further, you expressly understand andagree that the descriptions, designs, data, and informationfurnished by BASF hereunder are provided gratis and BASFassumes no obligation or liability for the description,designs, data and information given or results obtained, allsuch being given and accepted at your risk.
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Shipping information: 20,000-gallon tank cars, 6,000-gallon tank trucks and 55-gallon nonreturnable steeldrums are standard.
Technical Bulletin
Typical Properties
August 2001
Pluracol® polyol TPE 4542 is a moderately high molecular weight polyether triol that can be used in polyurethanesealant applications, flexible integral skin foam and cold-cured foam applications.
Storage and Handling: Pluracol TPE 4542 shouldbe stored under dry conditions below 130°F.
Nominal functionality ...................................................................... 3Nominal molecular weight .......................................................... 4500Density, lbs/gal @77°F .............................................................. 8.44
104°F ............................................................. 8.34140°F ............................................................. 8.24
Viscosity, CPS @ 77°F .............................................................. 900104°F ............................................................... 500140°F .............................................................. 220
Specific heat, BTU /lb °F ............................................................ . 0.5Thermal conductivity, BTU/hr ft 2 °F/in ....................................... 0.087Appearance......................................................................clear liquid
Pluracol® TPE 4542Specialty Polyol
Value Method (STI)Product SpecificationsHydroxyl number, mg KOH/gmWater, weight % maximumAcid number, maximumNa&K, ppm maximumColor, APHA maximumUnsaturation, meq/g, maximum
3007/31623062
3063/3161303830573056
36.3 - 38.30.040.03
540
0.09
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S., call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: This product is sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of this product.An MSDS as well as additional information on BASFurethane chemicals may be obtained by telephoningBASF Corporation, Urethane Customer Service at (877)297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Urethanes
Important: While the descriptions, designs, data andinformation contained herein are presented in good faith andbelieved to be accurate, it is provided for your guidance only.Because many factors may affect processing or applica-tion/use, we recommend that you make tests to determinethe suitability of a product for your particular purpose prior touse. NO WARRANTIES OF ANY KIND, EITHER EX-PRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, ARE MADE REGARDING PRODUCTSDESCRIBED OR DESIGNS, DATA OR INFORMATIONSET FORTH, OR THAT THE PRODUCTS, DESIGNS,DATA OR INFORMATION MAY BE USED WITHOUTINFRINGING THE INTELLECTUAL PROPERTY RIGHTSOF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS,INFORMATION, DATA OR DESIGNS PROVIDED BECONSIDERED A PART OF OUR TERMS AND CONDI-TIONS OF SALE. Further, you expressly understand andagree that the descriptions, designs, data, and informationfurnished by BASF hereunder are provided gratis and BASFassumes no obligation or liability for the description,designs, data and information given or results obtained, allsuch being given and accepted at your risk.
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Shipping information: 20,000-gallon tank cars, 6,000-gallon tank trucks and 55-gallon nonreturnable steeldrums are standard.
Technical Bulletin
Typical Properties
August 2001
Quadrol® polyol is N, N, N´, N´-Tetrakis (2-hydroxypropyl) ethylene-diamine. Quadrol has proven to be an excellentcross-linking agent and catalyst for use in polyurethane coatings and rigid foams. The four hydroxyl groups inQuadrol give multiple cross-linking sites and the two tertiary nitrogen atoms provide catalysis for the reaction.
Storage and Handling: Quadrol should be storedunder dry conditions.
Quadrol®Specialty polyol
Nominal hydroxyl number ............................................................ 770Nominal functionality .......................................................................4Nominal molecular weight ............................................................ 292Density, lbs/gal @77°F .............................................................. 8.59
104°F ............................................................. 8.51140°F ............................................................. 8.42
Viscosity, CPS @ 77°F ........................................................... 52000104°F ............................................................10000140°F .............................................................. 900
Specific heat, BTU /lb °F ............................................................ . 0.5Thermal conductivity, BTU/hr ft 2 °F/in ....................................... 0.087Appearance............................................................ water white liquid
Product SpecificationsAssay, % minimumWater, weight % maximumColor, APHA maximum
Method (STI)408630623057
Value99.00.170
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S. call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: These products are sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of these prod-ucts. An MSDS as well as additional information onBASF urethane chemicals may be obtained by tele-phoning BASF Corporation, Urethane Customer Serviceat (877) 297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Urethanes
Important: While the descriptions, designs, data andinformation contained herein are presented in good faithand believed to be accurate, it is provided for your guidanceonly. Because many factors may affect processing orapplication/use, we recommend that you make tests todetermine the suitability of a product for your particularpurpose prior to use. NO WARRANTIES OF ANY KIND,EITHER EXPRESS OR IMPLIED, INCLUDING WARRAN-TIES OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE, ARE MADE REGARDINGPRODUCTS DESCRIBED OR DESIGNS, DATA ORINFORMATION SET FORTH, OR THAT THE PRODUCTS,DESIGNS, DATA OR INFORMATION MAY BE USEDWITHOUT INFRINGING THE INTELLECTUAL PROP-ERTY RIGHTS OF OTHERS. IN NO CASE SHALL THEDESCRIPTIONS, INFORMATION, DATA OR DESIGNSPROVIDED BE CONSIDERED A PART OF OUR TERMSAND CONDITIONS OF SALE. Further, you expresslyunderstand and agree that the descriptions, designs, data,and information furnished by BASF hereunder are providedgratis and BASF assumes no obligation or liability for thedescription, designs, data and information given or resultsobtained, all such being given and accepted at your risk.
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Shipping information: 20,000-gallon tank cars,6,000-gallon tank trucks and 55-gallon nonreturnablesteel drums are standard.
Technical Bulletin
Storage and Handling: Pluracol GP polyols shouldbe stored under dry conditions below 130°F.
Pluracol® GP SeriesSpecialty Polyols
Pluracol® GP polyols are a series of four trifunctional polyols formed by adding propylene oxide to a glycerinenucleus. All Pluracol GP polyols are used in the preparation of polyurethane coatings, elastomers, adhesivesand sealants. Pluracol 1135i and 726 are also used in the preparation of flexible polyurethane foams.
Product Specifications
Hydroxyl number, mg KOH/gmWater, weight % maximumAcid number, maximumNa&K, ppm maximum
726GP730 1135iGP430R Method (STI)
388-4080.050.0110
222-2370.05
0.04510
107-1170.050.01
5
56-590.05
0.0155
3001/31623062
3063/31613038
Nominal functionalityNominal molecular weightDensity, lbs/gal @ 77°F
100°F120°F
Viscosity, CPS @ 77 °F100°F120°F
Specific heat, BTU/lb °FThermal conductivity, BTU/hr ft2 °F/in
Typical Properties 726GP730 1135GP430R
34008.758.688.61360160780.5
0.087
37008.568.498.43270140780.5
0.087
315008.448.388.313051671020.5
0.087
330008.358.288.154202101100.5
0.087
August 2001
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S. call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: These products are sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of these prod-ucts. An MSDS as well as additional information onBASF urethane chemicals may be obtained by tele-phoning BASF Corporation, Urethane Customer Serviceat (877) 297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Important: While the descriptions, designs, data andinformation contained herein are presented in good faithand believed to be accurate, it is provided for your guidanceonly. Because many factors may affect processing orapplication/use, we recommend that you make tests todetermine the suitability of a product for your particularpurpose prior to use. NO WARRANTIES OF ANY KIND,EITHER EXPRESS OR IMPLIED, INCLUDING WARRAN-TIES OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE, ARE MADE REGARDINGPRODUCTS DESCRIBED OR DESIGNS, DATA ORINFORMATION SET FORTH, OR THAT THE PRODUCTS,DESIGNS, DATA OR INFORMATION MAY BE USEDWITHOUT INFRINGING THE INTELLECTUAL PROP-ERTY RIGHTS OF OTHERS. IN NO CASE SHALL THEDESCRIPTIONS, INFORMATION, DATA OR DESIGNSPROVIDED BE CONSIDERED A PART OF OUR TERMSAND CONDITIONS OF SALE. Further, you expresslyunderstand and agree that the descriptions, designs, data,and information furnished by BASF hereunder are providedgratis and BASF assumes no obligation or liability for thedescription, designs, data and information given or resultsobtained, all such being given and accepted at your risk.
Shipping information: 20,000-gallon tank cars,6,000-gallon tank trucks and 55-gallon nonreturnablesteel drums are standard.
Technical Bulletin
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Urethanes
Pluracol® P polyols are a series of five polypropylene glycols formed by adding propylene oxide to a propyleneglycol nucleus. Pluracol P1010, P2010 and 1044 (formerly P4010) are used in the preparation of polyurethanefoams, adhesives, coatings, elastomers and sealants. Pluracol P410R and P710R are used in the preparationof one and two component polyurethane coatings, adhesives and elastomers.
Pluracol® P SeriesSpecialty Polyols
Storage and Handling: Pluracol P polyols should bestored under dry conditions below 130 °F.
Product SpecificationsHydroxyl number, mg KOH/gmWater, weight % maximumAcid number, maximumNa&K, ppm maximumUnsaturation, meq/g, max.Color, APHA maximum
P410R P710R P1010 P2010 1044 Method (STI)250-270
0.050.015
100.0140
140-1500.050.015
50.0240
102-1120.050.04
50.026
30
53.4-58.60.040.035
50.036
20
27.5-30.50.050.01
50.1030
3007/31623062
3063/3161303830563057
Nominal functionalityNominal molecular weightDensity, lbs/gal @ 77°F
100°F140°F
Viscosity, CPS @ 77 °F100°F140°F
Specific heat, BTU/lb °FThermal conductivity, BTU/hr ft2 °F/in
Typical Properties P410R P710R P1010 P2010 10442
4008.368.278.147339180.5
0.087
27008.368.268.1513960270.5
0.087
210008.398.318.1615078350.5
0.087
220008.368.278.50250180680.5
0.087
240008.348.248.067904251690.5
0.087
August 2001
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S. call (703) 527-3887.
Attention: These products are sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of these prod-ucts. An MSDS as well as additional information onBASF urethane chemicals may be obtained by tele-phoning BASF Corporation, Urethane Customer Serviceat (877) 297-3322 or faxing (734) 324-6866.
Important: While the descriptions, designs, data andinformation contained herein are presented in good faithand believed to be accurate, it is provided for your guidanceonly. Because many factors may affect processing orapplication/use, we recommend that you make tests todetermine the suitability of a product for your particularpurpose prior to use. NO WARRANTIES OF ANY KIND,EITHER EXPRESS OR IMPLIED, INCLUDING WARRAN-TIES OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE, ARE MADE REGARDINGPRODUCTS DESCRIBED OR DESIGNS, DATA ORINFORMATION SET FORTH, OR THAT THE PRODUCTS,DESIGNS, DATA OR INFORMATION MAY BE USEDWITHOUT INFRINGING THE INTELLECTUAL PROP-ERTY RIGHTS OF OTHERS. IN NO CASE SHALL THEDESCRIPTIONS, INFORMATION, DATA OR DESIGNSPROVIDED BE CONSIDERED A PART OF OUR TERMSAND CONDITIONS OF SALE. Further, you expresslyunderstand and agree that the descriptions, designs, data,and information furnished by BASF hereunder are providedgratis and BASF assumes no obligation or liability for thedescription, designs, data and information given or resultsobtained, all such being given and accepted at your risk.
Shipping information: 20,000-gallon tank cars,6,000-gallon tank trucks and 55-gallon nonreturnablesteel drums are standard.
Technical Bulletin
Pluracol® PEP Polyols 450 and 550 polyether tetrols have been developed specifically for use in polyurethanefoams, elastomers and coatings. Each member of the series is characterized by four secondary hydroxylgroups. These tetrols may be used as a crosslinking agent in polyurethane foam, elastomer and coatingformulations. For their hydroxyl number, these products are extremely low in viscosity. Foam formulationsusing these polyols are easily blended and handled, especially in water-blown foam systems.
Pluracol® PEP SeriesSpecialty Polyols
Storage and Handling: Pluracol PEP polyols shouldbe stored under dry conditions below 130 °F.
Typical PropertiesNominal functionalityNominal molecular weightDensity, lbs/gal @ 68°F
86°F104°F
Viscosity, CPS @ 68°F86°F
104°FSpecific heat, BTU/lb °FThermal conductivity, BTU/hr ft2 °F/inAppearance
PEP 4504
4008.998.948.89520019608000.5
0.087clear liquid
PEP 5504
5008.858.798.7424009604600.5
0.087clear liquid
Product SpecificationsHydroxyl number, mg KOH/gmWater, weight % maximumAcid number, maximumNa&K, ppm maximumColor, APHA maximum
PEP 550435-465
0.100.010-0.060
2070
PEP 450540-570
0.050.015-0.060
1570
Method (STI)3007/3162
30623063/3161
30383057
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Urethanes
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734-324-6100)http://www.basf.com/usa
August 2001
In case of chemical emergency: Call CHEMTREC800-424-9300 or BASF (800-832-HELP) day or night forassistance and information concerning spilled material,fire, exposure and other chemical accidents. Outsidethe U.S. call (703) 527-3887.
Warning: These products can be used to prepare avariety of polyurethane products. Polyurethanes areorganic materials and must be considered combustible.
Attention: These products are sold solely for use byindustrial institutions. Refer to our Material Safety DataSheet (MSDS) regarding regulatory compliance, safety,hazards, spill procedures and disposal of these prod-ucts. An MSDS as well as additional information onBASF urethane chemicals may be obtained by tele-phoning BASF Corporation, Urethane Customer Serviceat (877) 297-3322 or faxing (734) 324-6866.
BASF Corporation1609 Biddle AvenueWyandotte, Michigan 48192(734) 324-6100http://www.basf.com/usa
Important: While the descriptions, designs, data andinformation contained herein are presented in good faithand believed to be accurate, it is provided for your guidanceonly. Because many factors may affect processing orapplication/use, we recommend that you make tests todetermine the suitability of a product for your particularpurpose prior to use. NO WARRANTIES OF ANY KIND,EITHER EXPRESS OR IMPLIED, INCLUDING WARRAN-TIES OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE, ARE MADE REGARDINGPRODUCTS DESCRIBED OR DESIGNS, DATA ORINFORMATION SET FORTH, OR THAT THE PRODUCTS,DESIGNS, DATA OR INFORMATION MAY BE USEDWITHOUT INFRINGING THE INTELLECTUAL PROP-ERTY RIGHTS OF OTHERS. IN NO CASE SHALL THEDESCRIPTIONS, INFORMATION, DATA OR DESIGNSPROVIDED BE CONSIDERED A PART OF OUR TERMSAND CONDITIONS OF SALE. Further, you expresslyunderstand and agree that the descriptions, designs, data,and information furnished by BASF hereunder are providedgratis and BASF assumes no obligation or liability for thedescription, designs, data and information given or resultsobtained, all such being given and accepted at your risk.
©2000 BASF Corporation (January)Pluracol is a registered trademark of BASF Corporation.
Shipping information: 20,000-gallon tank cars,6,000-gallon tank trucks and 55-gallon nonreturnablesteel drums are standard.
Technical Bulletin
Pluracol® TP polyols are a series of four tri-functional polyols formed by adding propylene oxide to a trimethylolpropane nucleus. All Pluracol TP polyols are used in flexible and rigid polyurethane foams, coatings, adhesives,sealants and elastomers. Various members may be used in the preparation of prepolymers as cross-linkingagents or as polyol reactants in one-shot systems.
Storage and Handling: Pluracol TP polyols shouldbe stored under dry conditions below 130°F.
Pluracol® TP SeriesSpecialty Polyols
Pluracol TP440 is not to be used with products or polyolscontaining phosphorus. Thermal decomposition of polyure-thane foam made from this mixture can generate toxiccompounds.
Product SpecificationsHydroxyl number, mg KOH/gmWater, weight % maximumAcid number, maximumNa&K, ppm maximum
TP4040TP740 TP2540TP440 Method (STI)383-413
0.050.0310
216-2480.100.0610
61-670.050.04
7
39-430.050.0610
3007/31623062
3063/31613038
Nominal functionalityNominal molecular weightDensity, lbs/gal @ 77°F
100°F140°F
Viscosity, CPS @ 77 °F100°F140°F
Specific heat, BTU/lb °FThermal conductivity, BTU/hr ft2 °F/in
Typical Properties TP4040TP740 TP2540TP4403
4008.608.528.36600230580.5
0.087
37008.498.398.22325148450.5
0.087
325008.408.308.17400125500.5
0.087
340008.408.318.156803501400.5
0.087
August 2001