mscn6m_0774_001_20160826102340
1
SIEMENS 24 August 2016 To Whom lt May Concern: The undersigned, Christophe Liefooghe - Director 3D Simulation RTD - and Tommaso Tamarozzi - Sr. Research Engineer - at Siemens lndustry Software NV, lnterleuvenlaan 68, 3001 Leuven, Belgium, hereby confirm that Mr. Ranganath NAGARAJU, student at Politecnico d¡ Milano in Milano (ltaly) has performed an internship for the topic "Development of advanced bearing modeling techniques" at Siemens lndustry Software NV in Leuven (B). The traineeship has started on I March 2016 and will end on 7 September 2016. During his placement, Mr. Ranganath NAGARAJU has completed the following tasks: Substantial contribution to the development of a bearing auto-mesher for FE analysis for spherical, cylindrical and taper-roller bearings; Precisely documented the code architecture and created a reliable user manual; Extended the tools with further insights on bearing geometry; Non-linear contact simulation in NX Nastran Mr. Ranganath Nagaraju is a dedicated and precise worker, capable of working both in group and independently. His experience in our research group was positive both from a technical and social point of view. We thank Mr. Ranganath Nagaraju for his contribution for the 3D Driveline modeling RTD team of Siemens lndustry Software NV in Leuven (B) and wish him good success for his future career. Christophe Liefooghe Siemens lndustry Software NV Tommaso Tamarozzi Siemens lndustry Software NV Siemens lndustry Software NV Researchpark I 237 Interleuvenlaan 68 3001 Leuven Belgium Tel +3216384200 Fax +32 16 38 43 50 www.siemens.com/plm/lms RPR Leuven BTWVAT No. BE 0428.295.877 Deutsche Bank AG, No. 826-0006856-83, IBAN BE14 8260 0068 5683, BIC DEUTBEBEXXX
-
Upload
ranganath-nagaraju -
Category
Documents
-
view
23 -
download
1
Transcript of mscn6m_0774_001_20160826102340
SIEMENS
24 August 2016
To Whom lt May Concern:
The undersigned, Christophe Liefooghe - Director 3D Simulation RTD - and TommasoTamarozzi - Sr. Research Engineer - at Siemens lndustry Software NV, lnterleuvenlaan 68,3001 Leuven, Belgium, hereby confirm that Mr. Ranganath NAGARAJU, student atPolitecnico d¡ Milano in Milano (ltaly) has performed an internship for the topic"Development of advanced bearing modeling techniques" at Siemens lndustry SoftwareNV in Leuven (B).
The traineeship has started on I March 2016 and will end on 7 September 2016.
During his placement, Mr. Ranganath NAGARAJU has completed the following tasks:
Substantial contribution to the development of a bearing auto-mesher for FE analysisfor spherical, cylindrical and taper-roller bearings;Precisely documented the code architecture and created a reliable user manual;Extended the tools with further insights on bearing geometry;Non-linear contact simulation in NX Nastran
Mr. Ranganath Nagaraju is a dedicated and precise worker, capable of working both in groupand independently. His experience in our research group was positive both from a technicaland social point of view.
We thank Mr. Ranganath Nagaraju for his contribution for the 3D Driveline modeling RTDteam of Siemens lndustry Software NV in Leuven (B) and wish him good success for hisfuture career.
Christophe LiefoogheSiemens lndustry Software NV
Tommaso TamarozziSiemens lndustry Software NV
Siemens lndustry Software NV Researchpark I 237Interleuvenlaan 683001 LeuvenBelgium
Tel +3216384200Fax +32 16 38 43 50www.siemens.com/plm/lms
RPR LeuvenBTWVAT No. BE 0428.295.877Deutsche Bank AG, No. 826-0006856-83, IBAN BE14 8260 0068 5683, BIC DEUTBEBEXXX
