# Simple Functions in Haskell

date post

15-Aug-2014Category

## Documents

view

9.476download

950

Embed Size (px)

### Transcript of Simple Functions in Haskell

I wasn't really sure of quite how to start this off. I finally decided to just dive right in with a simple function definition, and then give you a bit of a tour of how Haskell works by showing the different ways of implementing it. So let's dive right in a take a look at a very simple Haskell definition of the factorial function: fact n = if n == 0 then 1 else n * fact (n - 1) This is the classic implementation of the factorial. Some things to notice: 1. In Haskell, a function definition uses no keywords. Just "name params = impl". 2. Function application is written by putting things side by side. So to apply the factorial function to x, we just write fact x. Parens are only used for managing precedence. The parens in "fact (n - 1)" aren't there because the function parameters need to be wrapped in parens, but because otherwise, the default precedence rules would parse it as "(fact n) - 1". 3. Haskell uses infix syntax for most mathematical operations. That doesn't mean that they're special: they're just an alternative way of writing a binary function invocation. You can define your own mathematical operators using normal function definitions. 4. There are no explicit grouping constructs in Haskell: no "{/}", no "begin/end". Haskell's formal syntax uses braces, but the language defines how to translate indentation changes into braces; in practice, just indenting the code takes care of grouping. That implementation of factorial, while correct, is not how most Haskell programmers would implement it. Haskell includes a feature called pattern matching, and most programmers would use pattern matching rather than the if/then statement for a case like that. Pattern matching separates things and often makes them easier to read. The basic idea of pattern matching in function definitions is that you can write what look like multiple versions of the function, each of which uses a different set of patterns for its parameters (we'll talk more about what patterns look like in detail in a later post); the different cases are separated not just by something like a conditional statement, but they're completely separated at the definition level. The case that matches the values at the point of call is the one that is actually invoked. So here's a more stylistically correct version of the factorial: fact 0 = 1 fact n = n * fact (n - 1) In the semantics of Haskell, those two are completely equivalent. In fact, the deep semantics of Haskell are based on pattern matching - so it's more correct to say that the if/then/else version is translated into the pattern matching version than vice-versa! In fact, both will basically expand to the Haskell patternmatching primitive called the "case" statement, which selects from among a list of patterns: (Note: I originally screwed up the following, by putting a single "=" instead of a "==" inside the comparison. Stupid error, and since this was only written to explain things, I didn't actually run it. Thanks to pseudonym for pointing out the error.) fact n = case (n==0) of

True -> 1 False -> n * fact (n - 1) Another way of writing the same thing is to use Haskell's list type. Lists are a very fundamental type in Haskell. They're similar to lists in Lisp, except that all of the elements of a list must have the same type. A list is written between square brackets, with the values in the list written inside, separated by commas, like: [1, 2, 3, 4, 5] As in lisp, the list is actually formed from pairs, where the first element of the pair is a value in the list, and the second value is the rest of the list. Pairs are constructed in Haskell using ":", so the list could also be written in the following ways: 1 : [2, 3, 4, 5] 1 : 2 : [3, 4, 5] 1 : 2 : 3 : 4 : 5 : [] If you want a list of integers in a specific range, there's a shorthand for it using "..". To generate the list of values from x to y, you can write: [ x .. y ] Getting back to our factorial function, the factorial of a number "n" is the product of all of the integers from 1 to n. So another way of saying that is that the factorial is the result of taking the list of all integers from 1 to n, and multiplying them together: listfact n = listProduct [1 .. n] But that doesn't work, because we haven't defined listProduct yet. Fortunately, Haskell provides a ton of useful list functions. One of them, "foldl", takes a function f, an initial value i, and a list [l1, l2,...,ln], and basically does f(ln(...f(l2, f(i,l1)))). So we can use foldl with the multiply function to multiply the elements of the list together. The only problem is that multiplication is written as an infix operator, not a function. In Haskell, the solution to that is simple: an infix operator is just fancy syntax for a function call; to get the function, you just put the operator into parens. So the multiplication function is written "(*)". So let's add a definition of listProduct using that; we'll do it using a where clause, which allows us to define variables or functions that are local to the scope of the enclosing function definition: listfact n = listProduct [ 1 .. n ] where listProduct lst = foldl (*) 1 lst I need to explain one more list function before moving on. There's a function called "zipWith" for performing an operation pairwise on two lists. For example, given the lists "[1,2,3,4,5]" and "[2,4,6,8,10]", "zipWith (+) [1,2,3,4,5] [2,4,6,8,10]" would result in "[3,6,9,12,15]". Now we're going to jump into something that's going to seem really strange. One of the fundamental properties of how Haskell runs a program is that Haskell is a lazy language. What that means is that no expression is actually evaluated until its value is needed. So you can do things like create infinite lists - since no part of the list is computed until it's needed. So we can do things like define the fibonacci series - the complete fibonacci series, using:

fiblist = 0 : 1 : (zipWith (+) fiblist (tail fiblist)) This looks incredibly strange. But if we tease it apart a bit, it's really pretty simple: 1. The first element of the fibonacci series is "0" 2. The second element of the fibonacci series is "1" 3. For the rest of the series, take the full fibonacci list, and line up the two copies of it, offset by one (the full list, and the list without the first element), and add the values pairwise. That third step is the tricky one. It relies on the laziness of Haskell: Haskell won't compute the nth element of the list until you explicitly reference it; until then, it just keeps around the unevaluated code for computing the part of the list you haven't looked at. So when you try to look at the nth value, it will compute the list only up to the nth value. So the actual computed part of the list is always finite - but you can act as if it wasn't. You can treat that list as if it really were infinite - and retrieve any value from it that you want. Once it's been referenced, then the list up to where you looked is concrete - the computations won't be repeated. But the last tail of the list will always be an unevaluated expression that generates the next pair of the list - and that pair will always be the next element of the list, and an evaluated expression for the pair after it. Just to make sure that the way that "zipWith" is working in "fiblist" is clear, let's look at a prefix of the parameters to zipWith, and the result. (Remember that those three are all actually the same list! The diagonals from bottom left moving up and right are the same list elements.) fiblist = [0 tail fiblist = [1 zipWith (+) = [1 1 1 2 1 2 3 2 3 5 3 5 8 5 8 ...] 8 ... ] 13 ... ]

Given that list, we can find the nth element of the list very easily; the nth element of a list l can be retrieved with "l !! n", so, the fibonacci function to get the nth fibonacci number would be: fib n = fiblist !! n And using a very similar trick, we can do factorials the same way: factlist = 1 : (zipWith (*) [1..] factlist) factl n = factlist !! n The nice thing about doing factorial this way is that the values of all of the factorials less than n are also computed and remember - so the next time you take a factorial, you don't need to repeat those multiplications.