Manufacturing Process Control Antoine van Riel

Agenda

1. Introduction 2. Explaination of our solution 3. Extension of the ARAS MPP Module

Introduction

Name: Antoine van Riel Role: Business Consultant BGrnd: - Mechanical Engineering - Informatics - PLM,PDM ERP Responsible for Minerva in the Benelux Functional Consultant at the Aeronamic

Challenges

• Customer demands use of APQP project management (Mandatory) • Information in different applications cannot be found quickly (Time) • No baselining or version control on items and documents (Failures) • Uncontrolled data from measurement equipment (Failures) • Measurements are hard to point back to the drawing balloon (Time) • Time consuming FAIR Process (first article inspection report) (Time) • Balloon of drawing manually and typed over in ERP (Time\Failures)

Documents

Serial Part Serial Part

Master Part

Part Chars Process Plan

Process Flow Diagram

FMEA Control Plan

Documents

Serial Part

Inspection Report

NCR

Analysis Containment Corrective Preventive

APQP Project

Phases, Gates, Activities,

deliverlables

Failed inspection

Files

CAPA (RRCA)

Process and Datamodel

Demo in ARAS Innovator

Extension of this solution with MPP module

• Create and manage version controlled configurations of Manufacturing Process documentation

• Basis for creating Work Orders and shop floor data collection • Multi-media work instruction content (3D, Video, 2D, Lists) • Direct linkage to Tooling database and Quality Systems • PLM – to – ERP interface used to promote Routings and WorkCenters to ERP • Direct linkage with Control Plans and Process FMEA’s • Kiosk on shop floor, terminals at the work centers, or printed work instructions

with Travelers • Copy, Paste, Libraries of routing modules, Part Families, etc. simplify the

maintenance of Manufacturing Process Plans • Serialized or Lot-based Traceability

Planning begin 2013

Preliminary Screendumps

Thanks for the attention