MAINTENANCE AND CLEANING HYGIENE TROUBLE SHOOTING

T r a d i t i o n i n E x c e l l e n c e s i n c e 1 8 6 9T r a d i t i o n i n E x c e l l e n c e s i n c e 1 8 6 9

Industrial Lubricants

SPECIALITIESMAINTENANCE ANDTROUBLE SHOOTINGPRODUCTSMD-4Multi-purpose maintenance aerosol,which lubricates, degreases, cleans,penetrates and dispels moisture.

SOLVENT CLEANERAn aerosol spray recommended for thefast degreasing of components. Designedto leave them chemically clean withoutsmears or corrosive residues.

PRISECopper anti-seize spray for assembly anddismantling of threaded connections.

PAVANWater-rinsable degreaser for removing themost stubborn grease and grime from allplant and equipment.

DEIONISED WATERHighly recommended for use in thebatteries of forklift trucks and other typesof industrial machinery ,where regularwater top-up replacement is necessary.

FLUSHING OILA combination of highly refined lightmineral oils and detergent/dispersantadditives to enhance removal of sludgeand lacquers that can build up in hydraulicsystems and compressors.

CLEANINGLENTO DISINFECTANTPowerful disinfectant for agricultural andcommercial use with a pleasant lavenderfragrance.

LYDIAN DEGREASERNon-caustic, water-rinsable detergent /solvent degreaser.

VIROCLEAN BIODEGRADABLECLEANERNon-toxic, water rinsable detergent /solvent degreaser.

CADENCE TFRPowerful detergent blend for use in hot or cold pressure washers and steamcleaners for removal of farm dirt and trafficfilm.

FLOOR DRESSING GRANULESPorous, inorganic granules for soaking upoil spills.

DESTRA DETERGENTA concentrate ideally suited to generalpurpose cleaning, from hand dishwashingto heavy duty applications. Has a mildcitrus odour.

HYGIENEBARRIER CREAMAntiseptic barrier cream to prevent skininfection and irritation.

ABGEL HAND CLEANSERBeaded gel hand cleanser for the farm anddealer workshops.

MOMENTOBiodegradable heavy-duty hand cleanserthat uses natural solvents derived fromcitrus fruits to remove a wide range ofsubstances including oil, tar, grease andbitumen.

For further advice on any of theproducts shown or applications not listed here, please consult our Technical Services Team.

K41EP, K42EP, K43EP Multi-purpose GreasesNLGI No.1, 2 & 3 Multi-purpose lithium greases withextreme pressure (EP) properties.Recommended for all general purposeindustrial applications including machinetools and bearings.

Temperature Range: -30°C to +130°C

K2EP Complex GreaseNLGI No.2 A lithium complex grease providing long-term high performance under very severe conditions. Demonstratesexcellent water tolerance. For all generalindustrial applications including bearingsthat require long-life high performancegrease. Recommended for machine toolapplications where water based floodapplied coolants are in use.

K40EP, K400EP, K4000EP Semi-fluid Greases NLGI No.0, 00 & 000Lithium extreme pressure (EP) semi-fluid greases for centralised lubricationsystems and industrial machinerygearboxes, particularly where there may be leakage using gear oil.

GREASESA broad range of grease to satisfy a variety of industrial applications

K46, K48 Moly GreasesNLGI No.1 & No.2Lithium soap greases with EPperformance enhanced with molybdenumdisulphide. Both greases are designed toprotect against seizure and heavy shockloads in conditions where ordinary greaseswould fail. Recommended for use in plainor anti-friction bearings, CV joints and other sliding applications.

K62 Bentone GreaseNLGI No.2 A premium quality non-melting grease foruse in plain and anti-friction bearingssubjected to elevated temperatures. The consistency of the grease remainsstable throughout a wide temperaturerange, making it particularly useful inapplications where melting out or drippingof grease would cause production issuesor damage to materials.

K65MS Synthetic High Temperature GreaseNLGI No.2A bentone grease containing syntheticbase fluid and solid lubricant additives foruse where very high sliding forces, radialpressures and high temperatures areencountered. It is water resistant and hasexceptional anti-wear, anti-corrosion andextreme pressure properties. Ideal for kilncar, exhaust fan and plain and rollingelement bearings.

Temperature Range: Up to 600°C

K982 MAGNAPLEX Open Gear GreaseNLGI No.0 K982 Magnaplex is an aluminiumcomplex grease specifically formulated foruse on open gears. This product has highload carrying and adhesivecharacteristics, allowing it to be usedwhere exceptionally high loads and slowsliding speeds are encountered.

K383 Anti-seize CompoundNLGI No.1.5K383 is a lead free anti-seize compound,made from high quality mineral oils, nonsoap thickener incorporating copperpowder and graphite. Excellent anti-seizeproperties make it ideal for lubricatingbrake linkages and it is also recommendedas a thread lubricant on studs, pipes,casings and whenever eventualdisassembly must proceed smoothly.

K84 Gear GreaseNLGI No.00 K84 is a polyalkylene glycol based fullysynthetic semi-fluid grease recommendedfor use in worm reduction units subjectedto high loads. K84 imparts a lowcoefficient of friction and hence transmitsthe maximum power with the minimumtemperature rise.

K99 Water Resistant GreaseNLGI No.2 Calcium complex grease with exceptionalwater resistance and good anti-corrosionproperties. Recommended for use as ageneral purpose grease where bearingsmay be temporarily immersed in waterand there is the possibility of corrosionfrom salt water or similar contaminants.May also be used in stern tubes.

K3Water Resistant GreaseNLGI No.2 A premium quality grease for use inindustrial applications where the presenceof water and humid atmospheres caneffect lubricating performance. Designedfor use in all plain and rolling elementbearings where water resistance isimportant and is especially recommendedfor use as a chuck grease where there isthe possibility of wash-off by water basedcutting fluids.

K323Lithium / Calcium Combination GreaseNLGI No. 2.5An extremely sophisticated lithium /calcium base grease which incorporatesmodern polymer technology. Thisadvanced grease has a high level of watertolerance, mechanical stability andadherence. Recommended for industrialapplications where such items as highloads, water wash out and abrasive wearhave been a recognised problem.

Operating Temperature: -25°C to +135°C

Certificate No. FM 21756 Certificate No. EMS 60044

www.morrislubricants.co.ukCastle Foregate, Shrewsbury, SY1 2EL Tel:+44 (0) 1743 232200 Fax:+44 (0) 1743 353584

All the products are reflective of the latest specifications at the time of going to press and are part of a continuousdevelopment programme. The company reserves the right to change formulation and specification, without priornotice to meet the latest trends and developments in industrial lubricants and grease technology.

For more detailed information on any product and confirmation of the latest specifications contact our TechnicalServices Department. Full product data sheets and health and safety information is available on request.

Certificate No. OHS 555083

TRIAD Premium GradeISO VG 32, 46, 68A range of premium grade mineral based hydraulic oils with good anti-wearproperties providing protection in the mostdemanding of systems.

Specifications DIN 51524 Parts 1 and 2 (DIN 51525), Sperry Vickers I-286-S, M-2950-S, Cincinnati Milacron P-68, 69, 70, Denison HF-2,

LIQUIMATIC NO’S.1 - 8 Zinc FreeISO VG 10, 15, 22, 32, 46, 68, 100, 150A range of high quality mineral oil basedhydraulic oils, incorporating ashlessadditive technology and available in avariety of viscosity grades. Excellent anti-wear and EP properties provideprotection against wear in the mostdemanding of systems. Other applicationsinclude: machining centre headstocks,centralised lubrication systems,compressors, suspension units, airlinelubricators and some turbine applicationswhere long life, filterability and highdemulsification properties are required.

Specifications DIN 51524 Parts I and II, AFNOR NFE 48-603 Parts I and II, Vickers Eaton I-286-S, M-2950-S, Denison HF-0, HF-1, HF-2, US Steel No.s 126, 127, 136, Cincinnati Milacron P-68, P-69, P-70, General Motors LS-02, Bosch Rexroth (formerly MannesmanRexroth) RE 90220,German Steel Industry SEB 181222, SAE MS1004

HYDRAULIC OILSA range of hydraulic oils for a wide variety of applications

LIQUIMATIC HV Multi-grade ISO VG 10, 22, 32, 46, 68, 100A range of high viscosity index hydraulicoils, formulated from high quality mineraloils and the latest anti-wear technology.They are ideal for hydraulic systemssubjected to the very extremes of operatingconditions and temperatures, from frozenfood stores (-20°C) to industrial hydraulicsystems at elevated temperatures.

Specifications DIN 51524 Part 3 (HVLP), Sperry Vickers I-286-S3, M-2950-S, DenisonHF-0 dry and wet T6C-020, Denison HF-1,HF-2, Cincinnati Milacron P-68, 69, 70(HV32, HV68, HV46), Poclain (HV 46), AFNOR E48-603 (HV:HM), ASLE 64.1 to64.4, 70.1 to 70.3, CETOP RP91H

LIQUISAFE 46Fire ResistantA high quality glycol based fire resistanthydraulic fluid recommended for allhydraulic systems, operating in conditionswhere the use of a mineral oil wouldpresent a fire hazard. Typical uses include:steel mills, casting shop machinery,furnace door closures, die castingmachines and underground equipment.

Specifications British Coal No. 570/1981International Fluid Classification - HFC

LODEXOLMineral Oil BasedISO VG 68, 100, 150, 220, 320, 460, 680A range of industrial gear oils, designed for use in a wide range of applications,including: reduction gearboxes, directdrives, angle drives, chain drives, gearcouplings, hoist/winch gearboxes, screwfeeder gearboxes, travel gearboxes, swinggearboxes, turret heads, workheads,centralised circulation systems, etc.

Specifications DIN 51517 Part 3 (1989) category CLP, ISO 12925-1: 1996 Category CKD, US Steel 224, ANSI/AGMA 9005-E02, AGMA 9004-D95, Textron David Brown No. S1.53 101, Table A2-8 CincinnatiMachine P-74 (ISO VG 220 only)

LODEXOL PG Polyalkylene GlycolISO VG 150, 220, 320, 460A range of fully synthetic gear oils designed to provide outstanding protection at alltemperatures to industrial gear systems.Unlike conventional gear oils PAG fluidsmaintain an effective lubricating film over awide operating temperature range, fromarctic conditions to high thermal loadings.recommended for use in all types ofindustrial gearboxes, especially worm gear drives.

Specifications DIN 51517 T.3 (ISO 6743/2) Type CLP, David Brown Table 4G - 7G

Warning: LODEXOL PG Grades must never be mixedwith other synthetic or mineral based lubricants.

INDUSTRIAL GEAR LUBRICANTSA range of high performance products for industrial gear systems

LODEXOL FS Fully SyntheticISO VG 150, 220, 320, 460A range of gear oils, combining syntheticbase fluids and powerful extreme pressure(EP) additives. They are formulated toprotect against wear, oxidation, foam, rustand corrosion and provide outstandingthermal stability ensuring that gearsystems running at elevated temperatureshave the correct level of protectionnecessary for long component life.

Designed for use in: reduction gearboxes,direct drives, angle drives, chain drives,gear couplings, hoist/winch gearboxes,screw feeder gearboxes, travel gearboxes,swing gearboxes, turret heads, workheads,centralised circulation systems, etc.

Specifications US Steel 224, AGMA 250.04, David Brown Table 4E - 7E

Tradition in Excellence since 1869Over 140 years of progress has seen Morris Lubricants become one of Europe’s largest privatelyowned lubricants companies, serving the UK and exporting to over 65 countries worldwide.

Morris Lubricants remains a company with a sense of history and tradition, with sound, high quality products and uncompromisingcustomer service combined with a refreshing approach to future development and innovation. Located in the historic town ofShrewsbury, Shropshire, the Morris plant is a statement of modern efficiency and fits discreetly into its market town setting.Morris Lubricants is a major supplier to multi-national industrial manufacturers.

AIR FORCE 2000ISO VG 68 and ISO VG 150Specially formulated ‘2000hour’ fluids developed tomeet the requirements ofhydrovane compressors andother similar vane compressors. Theseproductswill ensurelong, trouble-free compressor life,wherever a fluid of this viscosity is recommendedbythemanufacturer.

AIR FORCE 4000 ISO VG 32, 46, 68 & 100Specially formulated ‘4000 hour’ fluids developed to meet the needs of rotary screwcompressors, ensuring long, trouble-free compressor life. May also be used in continuousoperation train brake compressors and vehicle mounted or portable road breakingcompressors.

Specifications DIN 51506 VD-L Category

AIR FORCE COMPRESSOR OILSA range of lubricants designed and optimised for use in all compressor types

AIR FORCE 8000 FSISO VG 32, 46 & 68A range of ester based, fully synthetic, compressor lubricants designed specifically to meetthe requirements of rotary screw compressors including modern, variable speed types.They incorporate the latest additive technology and have proved to be far superior inperformance to conventional oils under all conditions.

Specifications DIN 51506 VD-L Category & DIN 51352 part 2

AIR FORCE EP22 Airline OilA low-viscosity airline oil, specifically designed for air tools of all types including road drills,jack hammers, air speed saws and torque wrenches. Also recommended for air motorsand the lubrication of pneumatic rams and cylinders. Can also be used for generallubrication in industrial applications, such as airlubes on CNCs.

AIR FORCE VPO HV Vacuum Pump OilManufactured from high quality mineral oils designed to maximise pump efficiency andvacuum performance, this oil has extremely low volatility, excellent thermal and oxidativestability, making it suitable for use in pumps operating at high temperatures.Recommended for use in a wide range of positive displacement vacuum pumps, includingrotary vane, lobe, screw and reciprocating designs.

ANKOR RRGeneral Purpose De-wateringA general purpose de-watering fluid and thinfilm solvent deposited rust preventative thatleaves a soft oily thin film that will impartcorrosion protection for a variety of materialsunder indoor storage conditions.

Recommended for all general purpose de-watering applications where some limitedcorrosion protection is required afterwards.

Removal of the protective film is by kerosene,white spirit or similar solvents.

Protection performance:Indoors only - 1 month

ANKOR DShort to Medium termA special solvent deposited product, short tomedium term rust preventative. This productis particularly useful where the metal parts tobe treated are wet, making it very effective asa rust preventative in damp atmospheresand all climates.

Recommended for use in machine shops asan inter-operation rust preventative for wet parts.

Protection performance:Indoors - 12 monthsCovered outdoors - 6 monthsOutdoors - 3 months

CORROSION PREVENTATIVESA range of products providing a variety of protection times and film types

ANKOR CMedium TermAnkor C is a solvent deposited, mediumterm rust preventative, for use where thetreated parts are exposed to outdoorconditions. This product is particularly useful wheremetal parts to be treated are wet, becausethe chemistry of Ankor C has an attractionto the metal surface and this completelydisplaces all traces of water before layingdown the protective rust preventing film.Recommended for medium term rustproofing, for parts stored in or outdoors.

ANKOR WAXLong-termA special solvent deposited, long termcorrosion preventative, that dries to leave a continuous firm wax protective coatingthat imparts excellent corrosion protectionproperties. Ankor Wax has de-wateringproperties and thereforecan be used wherethe metal parts to be treated are wet.Recommended for all medium and long-term corrosion protection applications.

Protection performance:Indoors - 3 to 5 yearsCovered outdoors - 3 years Outdoors - 2 years

ANKOR 147Solvent freeAnkor 147 is an oil-based corrosionprotective, free from hydrocarbons andother solvents, that leaves a thin oily film toimpart corrosion protection for a variety ofmetals (including steel, aluminium andcopper) under short to medium termstorage dependent upon conditions.

Protection performance:Indoors - 4 monthsCovered outdoors - 2 monthsOutdoors - not recommended

ASTRAISO VG 32, 68, 100, 150 & 220Recommended for slideways, tables,carriages, guides and all machining centreapplications where a tacky extremepressure lubricant is required. This range of oils may also be used for the lubricationof headstocks, cross feeds, saddles andgearboxes.

SLIDEWAY LUBRICANTSA range of multi-functional lubricants for machining centres

ASTRASLIDE S 68High Performance, tack-free Recommended for all machine toolslideways, especially modern plastic andcomposite slideways, tables, carriages,guides, tool stations and other machineapplications where an ISO VG 68 extremepressure lubricant is specified. May also beused in headstocks, cross feeds and saddlesand also for use on the bed of wire and tubedrawing machines where an oil of this typeand viscosity is required.

Specifications FZG Damage stage >12 Cincinnati Milacron P47 (meets requirements)US Steel 224, AGMA 250.04ISO 6743 - L HG

TABOR 13A high quality low-viscosity mould releaseoil containing low odour hydrocarbonsolvent, mineral oil, reactive fat andlubricity additives. It has been speciallyproduced for use as a multi-purpose mouldrelease agent for use on steel or woodenmoulds and provides a high quality surfacefinish. Does not cause stains ordiscolouration and is not absorbed by theconcrete.

TABOR 95A high quality concrete mould oil speciallydesigned for production of slabs, posts andpavings where precision steel moulds areused. Provides an excellent surface finishand protects steel moulds from rust. Thisproduct is also suitable for use on woodand most plastic moulds due to theabsence of hydrocarbon solvents.

TABOR 99A high quality steel shuttering oil, that hasbeen designed as a release agent toprevent concrete clinging to steelshuttering used in the constructionindustry. Gives an excellent surface finishand provides protection against rust forshuttering, keeping it in good condition andfree of concrete ready for further use.

MOULD RELEASE OILSA range of products covering differing mould types and methods

TABOR OKA mould release agent for simple steelshuttering using wet concrete, Tabor OKwill give good release and anti-corrosionproperties. May also be used in a variety ofother uses, including: degreasing, as aprocess oil and as a dielectric fluid forspark erosion.

TERZA 7060A high quality low-viscosity mould releaseoil that has been specially produced for use in high rate production of fired clay,brick and concrete building products. It isan excellent release agent that preventsclay and concrete clinging to the moulds,and provides a high quality surface finish.

TERZA 7126A mould release concentrate specificallydesigned to enable the end user to dilute as required. This one product can be usedfor a wide range of release applications and this is particularly important wherethere is pressure to keep inventories low, or when some user experimentation isdesirable to facilitate rapid changes in endproduct or production methods.

TERZA M-107A high quality low-viscosity mould releaseoil that has been specially produced for use in high rate production of concrete rooftiles, on the type of machines where themoulds are continuously chain driven pastthe pouring hopper. Does not cause stainsor discolouration.

ALTO Machine OilsISO VG 10, 15, 22, 32, 46, 68,100,150, 220, 320, 460, 680, 1000A versatile range of oils that can be usedwherever a straight mineral oil with modestadditive treatment has been specified.Particularly recommended for industrialuse in enclosed and circulating systems, oilbaths, automatic lubricators, wick oilers,spray, splash and mist lubricators and alloil-lubricated bearings, machine toolheadstocks, enclosed gearboxes andvacuum pumps. These oils are alsosuitable for all general lubrication uses andoil can applications.

ARCATO R32, R46, R68Refrigeration Compressor OilsThese products are manufactured fromhigh quality naphthenic mineral oils,providing the stability and low temperaturecharacteristics necessary for the correctlubrication and operation for this type ofequipment. Can be used in all commonlyfound domestic, commercial, andindustrial refrigeration and freezer systems,and all air conditioning systems (except inrare cases where a synthetic oil has beenspecified). They are compatible withcommonly used HCFC, CFC and ammoniarefrigerants.

Specifications British Standard BS 2626/1975

ARIA EP Rock Drill OilsISO VG 100, 150, 220A range of oils specifically designed for the lubrication of percussion type air tools.Special lubricants are required for thisapplication to counter the sudden drop in temperature and increase in relativehumidity when air expands in the tool.Recommended for air tools of all typesincluding rock drills, road drills, pneumaticpile drivers, jack hammers, air speed saws and torque wrenches.

Specifications U.S. Steel 224, AGMA 250.04

GENERAL LUBRICANTSA range of products to cover a wide selection of industrial applications

ATONAL 323, 324Heat Transfer OilsHeat Transfer Oils manufactured from highquality mineral oils and powerful oxidationinhibitors to ensure thermal stability forhigh working temperatures over longperiods. These grades are suitable forindustrial closed systems, asphalt plants,low temperature open systems, oil filledradiators and heat shunts or wherever amineral oil of this type has beenrecommended.

LIQUIMATIC VG5Light Spindle OilA low-viscosity hydraulic oil ideal forlubricating high-speed zero clearancebearings on grinding machines and otherapplications, where a low viscosity grade ofthis type is requested by the originalequipment manufacturer.

TRANSFORMER OILElectrical Switchgear OilTransformer Oil is recommended for use as a dielectric and coolant in all oil filledtransformers, switchgear, welders andother electrical equipment.

Specifications Meets the requirements of BS 148 (1984)Class I and II, ASTM D3487 type I and IECpublication 296 class I and II, at the timeof manufacture

S-3403Synthetic Chain LubricantRecommended for all chain drives workingin high temperatures and difficultconditions, applications include chaingrate and stoker drives, furnace dooropeners in steel works, roller and overheadkiln conveyors found in ceramics and brickindustries.

LARGO P1Spark Erosion FluidA highly refined low-viscosity productformulated for use as a dielectric fluid in spark erosion machines, where odourand evaporation losses must be kept to a minimum.

MAINTENANCE AND CLEANING HYGIENE TROUBLE SHOOTING

Documents

Transcript of MAINTENANCE AND CLEANING HYGIENE TROUBLE SHOOTING