JS10B-M2B Mini-MUX V2.3 20120802

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

1/64

Users manual

JS10B-M2BMini-MUX

JIASIN INDUSTRY COLTDZHUHAI

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

2/64

Product nameJS10B-M2B Mini-MUX (V2.3 )

All rights reserved

JIASIN INDUSTRY CO., LTD, ZHUHAI

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

3/64

JS10B-M2B Mini-MUX

1 25

........................................................................................ 2

.................................................................................. 3

2.1 ......................................................................... 3

2.2 ............................................... 4

2.3 ................................................................................ 5

2.4 ................................................................................ 5

2.4.1 E1 ................................................................ 5

2.4.2 V.24 ............................................................. 7

2.4.3 10Base-T

..................................................... 7 .................................................................................. 8

3.1 CONSOLE .......................................................... 8

3.2 JSNetView JS10B-M2B................... 8

3.2.1 ............................................................ 9

3.2.2 E1 ...................................................... 9

3.2.3 .......................................................... 10

3.2.4 ...........................................................113.3 JS10B-M2B............................ 12

3.3.1 .................................................... 12

3.3.2 System parameter Setup.................................. 14

3.3.3 E1 parameter Setup ......................................... 15

3.3.4 Timeslot Parameter Setup................................ 16

3.3.5 Loopback Test .................................................. 17

3.3.6 software update................................................ 18

................................................................................ 22

......................................................................... 23

5.1 ........................................................ 23

5.2 .................................................... 23

5.3 ........................................................ 24

....................................................... 25

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

4/64

JS10B-M2B Mini-MUX

2 25

JS10B-M2B MUX ASIC

E1 E1

JS10B-M2B 2 V.24

N64Kbps

LAN

/

ASIC

JS10B-M2B MUX E1 E1

E1 V.24

10Base-T

N64Kbps E1

E1

10 W

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

5/64

JS10B-M2B Mini-MUX

3 25

2.1

2.1.1

E1 2.048Mb/s HDB3G.703G.704

75 120

V.249.619.2Kbps64128Kbps ITU-V.24

DCE

10Base-TN64Kbps IEEE 802.32K MAC VLAN

100Base-TX

CONSOLE PC COM

38400bps81

2.1.2

-48VDC

10W

-5 +6010 95RH

-30 +7010 95RH

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

6/64

JS10B-M2B Mini-MUX

4 25

2.2

1 JS10B-M2B

2.2.1

2

1

1 PWR -48V

2 ELOS E1

3 ERCL E1

4 NLOS E1

5 NRCL E1

2.2.2

3

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

7/64

JS10B-M2B Mini-MUX

5 25

2 V.24

1 -48V -48V,+GND--48V2 CONSOLE DB9/F

3 V.24 V.24

4 ETH 10Base-T 100Base-TX

5 E1 2M E1 75 120

2.3

JS10B-M2BMUXE1

E1V.24 10Base-T

E1 75

120DB9/F

E1

JSNetView

2.4

2.4.1 E1

120

4 E1 120 DB9/F

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

8/64

JS10B-M2B Mini-MUX

6 25

3 E1120 DB9/F

1 2 3 4 5

ETXD+ ERXD+ NTXD+ NRXD+ GND

E1

E1

E1

E1

6 7 8 9

ETXD- ERXD- NTXD- NRXD-

E1

E1

E1

E1

75

5 E1 75

75/120

4 E175/120E1

75 E1J9J10J11J12(75)

E1J5J6J7J8 (75)

120 E1J9J10J11J12(120)

E1J5J6J7J8 (120)

E1

E1

E1

E1

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

9/64

JS10B-M2B Mini-MUX

7 25

2.4.2 V.24

6 V.24 DB9/F

5 V.24 DB9/FDCE

1 2 3 4 5 7

XCLK RXD TXD TCK GND RCK

8 9

DSR CTS

2.4.3 10Base-T

7 10Base-T

6 10Base-T RJ45

1 2 3 4 5 6

TX+ TX- RX+ RX-

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

10/64

JS10B-M2B Mini-MUX

8 25

JS10B-M2B PC

CONSOLE PC COM JSNetView

3.1 CONSOLE

8 CONSOLE

7 CONSOLE DB9/F

1 2 3 4 5 6

RXD TXD GND

3.2 JSNetViewJS10B-M2B

JSNetView JS10B-M2B

JSNetView JS10B-M2B

CONSOLE JS10B-M2B JS

E1 JS10B-M2B

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

11/64

JS10B-M2B Mini-MUX

9 25

3.2.1

JSNetView JS10B

JS10B-M2B

JS10B-M2B

JS10B-M2B

9

3.2.2 E1

10 E1

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

12/64

JS10B-M2B Mini-MUX

10 25

E1

E1

E1

CRC E1 HDLC

CCS/CASE1/ CCS

V2.0

E1 HDLC

E1 HDLC

3.2.3

11

A B E1

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

13/64

JS10B-M2B Mini-MUX

11 25

TS1-TS31A B

V.24

2 3

A B

3.2.4

/

E1A B

12

/ E1/ E1

/ E1/ E1

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

14/64

JS10B-M2B Mini-MUX

12 25

PCM/ PCM

/ A/B TTL

3.3 JS10B-M2B

WINDOWS

3840081

ANSIW

Enter

WINDOWS

3.3.1

8 4

3 1

DU

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

15/64

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

16/64

JS10B-M2B Mini-MUX

14 25

3.3.2 System parameter Setup

14

/

X

Device ID ID ID

System Clock

Soft Reset JS10B-M2B

Clear All TS

E1 E1

Node Type

Com Buadrate CONSOLE

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

17/64

JS10B-M2B Mini-MUX

15 25

38400

3.3.3 E1 parameter Setup

15 E1

/

X

CRC ControlCRC

CCS/CAS ControlCCS,V2.0

Hual Control E1/,,

V2.0

Hdlc TS AssignHDLC

TS0

E1 Receive Mode/Transmit Mode V2.0

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

18/64

JS10B-M2B Mini-MUX

16 25

Master Channel E1

3.3.4 Timeslot Parameter Setup

16

/

X

131

10Base-TV.35V.24 E1

F

G10Base-T

H1 2V.24

2LR

V.24 128K

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

19/64

JS10B-M2B Mini-MUX

17 25

3.3.5 Loopback Test

17

/ E1 / E1

/ E1 / E1

PCM/ PCM

/

A/B TTL

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

20/64

JS10B-M2B Mini-MUX

18 25

3.3.6 software update

software update 1 18

18 1

(S) 19

19 2

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

21/64

JS10B-M2B Mini-MUX

19 25

*.POFXmodem(S),

20

20 3

, 5 21

21 4

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

22/64

JS10B-M2B Mini-MUX

20 25

, 5

22

22 5

FLASH FLASH

5 23

23 5

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

23/64

JS10B-M2B Mini-MUX

21 25

24

24 6

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

24/64

JS10B-M2B Mini-MUX

22 25

4.1

4.2

JS10B-M2B -48V+GND

-48V

4.3

PWR

CONSOLE

CONSOLE

PCCOM

CONSOLE

E1

NLOSELOSNRCLERCL

10Base-T PC PING PING 10Base-T

V.24 V.24 E1

V.24

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

25/64

JS10B-M2B Mini-MUX

23 25

5.1

25

2

V.24 10Base-T

5.2

2E1E1

2

26

DDN

JS10BE1

JS10BE1

JS10B

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

26/64

JS10B-M2B Mini-MUX

24 25

5.3

E1

27

5.4

E1

E1

N*V.24

N*V.24

OA

E1

JS3030

JS10B

V.24/RS232

/ 1,2,,n

V.24/RS232

10BaseT

E1

E1

DDN

JS10B

E1

JS10B

E1

E1

28

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

27/64

JS10B-M2B Mini-MUX

25 25

E1 E1

E1

PWR

E1 NLOS ELOS

E1 NRCL ERCL

CRC

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

28/64

JS10B-M2B Mini-MUX Users manual

Page 1 of 34

Contents

1.Summary ........................................................................................... 22System description ......................................................................... 4

2.1 System technique parameter................................................. 42.2 System exterior structure and front-rear board description... 52.3 Function description............................................................... 62.4 Port output.............................................................................. 7

2.4.1 E1 port output ............................................................. 72.4.2 V.24 port output .......................................................... 8

2.4.3 10Base-T port output.................................................. 93Operation guide ............................................................................ 10

3.1 CONSOLE............................................................................ 103.2 Operation description in JSNETVIEW ................................. 10

3.2.1 Set COM Port parameters.........................................113.2.2 Establish JS10B and connect the serial port withJS10B .................................................................................113.2.3 Check JS10B ID number.......................................... 123.2.4 JS10B attribute menu............................................... 123.2.5 JSNetView Device Info menu ................................ 133.2.6 JSNetView E1 Info menu ....................................... 143.2.7 JSNetView Data Port menu ................................... 153.2.8 JSNetView Loop Test menu................................... 16

3.3 Operation description in hyper terminal............................... 183.3.1 Hyper terminal main control menu ........................... 193.3.2 System parameters set menu .................................. 203.3.3 E1 Parameters set menu.......................................... 213.3.4 Data timeslot parameters set menu ......................... 233.3.5 Loop-back control menu........................................... 24

3.3.6 software update Menu .............................................. 254Installation application .................................................................. 305Typical application solution........................................................... 31

5.1 System single terminal access network............................... 315.2 System point-to-point network ............................................. 315.3 Added and dropped access application............................... 325.4 Integration Data transmission application............................ 33

6. Note item and fault operation ...................................................... 34

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

29/64


Page 2 of 34

1.Summary

JS10B-M2B Interface Converter is the design apotheosis using

LSI ASIC. It pick up part of time-slots from E1 line based on E1transmission. JS10B-M2Bhave 2 data interfaces of V.24 or Ethernet

with the rate of N64Kbps optional. Especially can be used in the field

of Network managementBusiness hall BillMonitorImage collection

LAN Network intercommunication, etc, that less requirements for

service ports. It is a economichigh efficient and convenient data

access device. It had been widely used in the network of Telecom,

MobileCom, UniCom, NetCom, Electic Power, Police, Army, etc. It

also had been widely used in the filed of count/monitornetwork

intercommunicationsubscribers service access , etc

Product Features:

Adopt advanced ASIC designing technology. streamline exterior

structure, small size.

With intuitionistic status indication, it is easy to find and solve the

problem for the equipment maintenance.

JS10B-M2B Mini-MUXProviding 2 E1 interfaces with framer on

network side E1 port and the extended side E1 port, and 2 data

ports of V.24 or 10Base-T interface.

Bypass function of E1. When power down of JS10B-M2B

Mini-MUX being work, its two E1 ports would be directly internal

connected each other.

System clock optional.

Optional data rate of N*64Kbps, which not only can select E1

timeslots discretionarily in the network side E1, also can select in

succession. The residual time-slots can be transferred from the

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

30/64


Page 3 of 34

extended E1 port side to the extended side E1 port for

JS10B-M2B Mini-MUX with two E1s.

The hyper menu easily for system configuration & systemoperation.

Not only can be used in the large network for terminal data

access & extend, but also used in the solution for point-to-point

application.

Low power consumptionless than 10W.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

31/64


Page 4 of 34

2System description

2.1 System technique parameter

2.1.1 Port type

E1 port: rate 2.048Mb/s, code type HDB3, meeting G.703 and

G.704 protocol. unbalanced 75 impedance or balanced 120

impedance.

V.24 interfaceasynchronous 9.6 or 19.2Kbpssynchronization 64

or 128Kbpsmeet ITU-V.24 protocolDCE mode.

10Base-T interfaceN64Kbpsmeet IEEE 802.3 protocol2K

MAC address list, with automatic adjustabilitystream control,

support VLAN data transmissioncompatible with 100Base-TX

interface at the same time.

CONSOLE interfaceHyper terminal connect serial port, can

connect the cross line & the COM port of PC, attribute 38400bps,

8bit, no odd-even checkout, 1 stop bit and no data streamcontrol.

2 clock mode optional of Network clock, internal device clock.

2.1.2 Work condition

Power -48VDCsupply.please give clear indication of power

interface when you speak for the device

Whole device power consumption 10W.

Work temperature:-5 +6010 95RH

Stock temperature-30 +7010 95RH

No causticity gas, no raised dirt, no strong magnetically disturb.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

32/64


Page 5 of 34

2.2 System exterior structure and front-rearboard description

2.2.1 Front board signal indication

Fig.1 Appearance of JS10B-M2B

Fig. 2 Front board signal indication

Table1 Description of front board signal indication

Item Mark Function

1 PWR Power indication, Green light indicate the 5V power supply is

normal

2 ELOSExtend side E1 signal indication, red light indicate loss of

signal.

3 ERCL Extend side E1 frame synchronization indication, Red light

indicate loss of Frame synchronization

4 NLOS Network side E1 signal indication, Red Light indicate loss of

signal

5 NRCL Network side E1 frame synchronization indication, Red light

indicate loss of Frame synchronization.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

33/64


Page 6 of 34

2.2.2 Description of Rear board port & signal indication

Fig.3 Rear board port Data portEthernet interface

Table 2 Rear board port & signal indicationData portEthernet

interface

Item Mark Function

1 -48V -48V DC-DC power input,+is GND,-is -48V

2 CONSOLE DB9/F hyper terminal network management serial port

3 V.24 V.24 data port

4 10Base-T10Base-T Ethernet interface, compatible with100Base-TX

5 E1 E1 port, compatible with 75 and 120

2.3 Function description

JS10B-M2B Mini-MUX Interface Converter mainly redistributes

& utilizes framed E1 circuit, and provides two data ports for the

application of connecting terminal. JS10B-M2B Mini-MUX includes

two E1 ports and 2 data ports.

E1 port output in 75 imbalance mode with additional

transform copper cable head, also can output in 120 balance

mode with DB9/F connector by internal skip-line .

Two data ports can randomly distribute the timeslot from

network side E1 port, and the timeslot selection can be

discontinuous or in succession. If you would not like to use one of

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

34/64


Page 7 of 34

the data port, this port cant be distributed to any time-slot.

Configuration of the device can be operated in the hyper

terminal, and also can be set by our network management system.

2.4 Port output

2.4.1 E1 port output

120 balanced port

Fig.4 E1 port of 120 with DB9/F output

Table 3 E1 port of 120 balanced with DB9/F output table

Pin. No. 1 2 3 4 5

Mark ETXD+ ERXD+ NTXD+ NRXD+ GND

Description

Extend E1

transmit

(Output)

Extend E1

receive

(Input)

Network

E1

transmit(Output)

Network E1

receive

(Input)

Signal

GND

Pin. No. 6 7 8 9

Mark ETXD- ERXD- NTXD- NRXD-

Description

Extend E1

transmit

(Output)

Extend E1

receive

(Input)

Network

E1

transmit

(Output)

Network E1

receive

(Input)

75 imbalance port

Network E1Transmit Output

Network E1Receive

Extended E1Transmit

Extended E1 Receive Input

Fig.5 E1 Port 75 transform head

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

35/64


Page 8 of 34

75/120s transform needs to open the cover of the device, and

set the corresponding skip-line with On or Off. Generally the

skip-line has been set OK before delivery. If have special requirement,

please explain the skip-line in following form

Table 4 E1 Port75/120impedance transform skip-line table

E1impedance Skip-line description

75Network side E1J9J10J11J12(Jump to 75)

Extended side E1J5J6J7J8 (Jump to 75)

120Network side E1J9J10J11J12(Jump to120)

Extended side E1J5J6J7J8 (Jump to120)

2.4.2 V.24 port output

Fig.6 V.24 portDB9/F

Table 5 V.24port output tableDB9/F

Serial

No.

1 2 3 4 5 7

XCLK RXD TXD TCK GND RCKSignal

line Input Output Input OutputSignal

GNDOutput

Serial

No.

8 9

DSR CTSSignal

lineIutput Output

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

36/64


Page 9 of 34

2.4.3 10Base-T port output

Fig.7 10Base-T port

Table 6 10Base-T port output tableRJ45

Serial No. 1 2 3 4 5 6

Signal line TX+ TX- RX+ NC NC RX-

Use direct network line or cross network linesignal automaticadaptive.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

37/64


Page 10 of 34

3Operation guide

All the control parameters of JS10B-M2B are set by software.

The user can easily set the device parameter on the PC by hyper

terminal without installing any network management software. Using

one cross serial port line to connect CONSOLE port and COM port

on PC. And also can be set by our network management

system-JSNetView.

3.1 CONSOLE

Fig.8 CONSOLE port with DB9/F

Table7 CONSOLE port output TableDB9/F

Serial No. 1 2 3 4 5 6

--- RXD TXD --- GND ---Signal Line

--- Input Output --- Signal GND ---

3.2 Operation description in JSNETVIEW

When Jiasin JSNetView network management (NM) software is

installed, the management configuration of JS10B-M2B can be

realized, including system parameter setting, status inquiry, port

configuration and loopback control.

The computer terminals, on which JSNetView NM software is

installed, can manage JS10B-M2B directly via its CONSOLE port, or

through E1 transmission channels of the network formed with JS

equipment.

Before entering the JsNetview network management software,

Connect one end of the serial NM cable provided together with JS10B

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

38/64


Page 11 of 34

equipment to the serial port of the computer and connect the other

end to the CONSOLE port on the rear panel of JS10B equipment.

3.2.1 Set COM Port parametersRun JSNETVIEW NM software, establish a new communication

port, and set parameters of serial port (COM PORT).

Fig. 9 JS10B serial port parameter setting3.2.2 Establish JS10B and connect the serial port with

JS10B

Fig. 10 Establish JS10B topological link with NM software

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

39/64


Page 12 of 34

3.2.3 Check JS10B ID number

Right click JS10B and select the option of Query ID No for

checking whether the equipment can conduct NM.

Fig. 11 Check JS10B ID Number

3.2.4 JS10B attribute menu

When NM software finds the actual equipment ID is inconsistent

with NM software, a prompt interface will pop up to ask the user

whether to modify ID. Click OK to enter equipment attribute interface,

on which the device ID No., position and other information in NM

software can be modified.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

40/64


Page 13 of 34

Fig. 12 JS10B attribute menu

3.2.5 JSNetView Device Info menu

NM system will enter the main equipment management interface

of JS10B, Device Info interface as shown in the following figure

when you double click the icon of JS10B equipment in the network

topological view of JSNetView.

Set clock, reset software, import data and save data can

be selected in the interface for JS10B-M2B. Besides, various basic

information of JS10B is displayed.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

41/64


Page 14 of 34

Fig. 13 JS10B Device Info menu

3.2.6 JSNetView E1 Info menu

Enter JS10Bs E1 info interface to make inquiry and setting of

the equipments E1 parameters.

E1 port status displayDisplay the alarm information of E1 ports at network side and at

extended side. Green indicator denotes normal status and red

indicator gives an alarm.

E1 parameter setting (Settings for network side and extended

side are the same)

Including CCS/CAS options, CRC options, long/short distance

options of E1 cables, E1 NM channel (time slot used by HDLC)

options. Besides, you can select whether main link is network

side or extended side.

NOTES: CCS/CAS options, long/short distance setting is

invalid .

Operation illustration

Click Refresh to refresh data. NM will retrieve the alarm

information of E1 port and the information on the time slot used

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

42/64


Page 15 of 34

by HDLC from the equipment.

Click Set parameter(S) to set parameters. NM will store the

modified E1 parameters and the information on the time slot used by

HDLC in the equipment. All settings become valid only after Set

parameter(S)is clicked.

Fig. 14 JS10B E1 Info menu

3.2.7 JSNetView Data Port menu

Enter JS10Bs Data port interface to configure timeslot, bandwidth

and other data.

Data port timeslot configuration and display

All E1 port timeslots at network side (TS1-TS31) can beconfigured as Port A or Port B by clicking All- Port A or All

Port B. Besides, you can make configuration by clicking desired

timeslot blocks. Please note a maximum of two timeslots can be

allocated for V.24 data interface. Therefore, it will work

abnormally if three or more than three timeslots are allocated.

Yellow: Assigned to Port A. Pink: Assigned to Port B. White:

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

43/64


Page 16 of 34

Unused.

Operation illustration

Set parameter(S):Import timeslot configuration parameters into

equipment.

Refresh: Inquire actual timeslot configuration in equipment.

Fig. 15 JS10B Data Port menu

3.2.8 JSNetView Loop Test menu

Enter Loop test to conduct various loopback operations of the

equipment for facilitating deployment and maintenance.

On the interface, various port loopback operations are available as

shown in the following figure, including expanded side/network side

E1 interface loop by local end/remote end, and the data of port A/B

loop.

Any loopback becomes valid only after Loopback control is

clicked.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

44/64


Page 17 of 34

Fig. 16 JS10B Loop Test menu

Illustration

Network side/expanded side E1 interface loop by remote end:

Self-loop of network side/expanded side E1 interface towards the

inner of the equipment.

Network side/expanded side E1 interface loop by local end:

Loopback of network side/expanded side E1 interface towards

the outer of the equipment.

PCM code stream loop by network side/expanded side: Loopback

at the PCM code stream inside the equipment towards the outer

of Network side/ expanded side E1. (for the manufacturers

commissioning). The data of port A/B loop by network side: Loopback at the TTL

stream of port A/B inside the equipment towards the outer of

Network side.

NOTES: The various loopback setting can only have one loopback

to have the effect, and all loopback change to the default value :

OFF when power down.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

45/64


Page 18 of 34

3.3 Operation description in hyper terminal

Before entering the hyper menu, first set the parameters of hyper

terminal under the WINDOWS system

Click start program attachment hyper terminal

menu, start hyper terminal application program.

Set the hyper terminal parameters as 384008No1

No

Set terminal emulation type as ANSIW

Then click 3 thrice Enter button entering main control

interface menu.

All the operation of hyper terminal interface can be finished by

press single letter button, detail explanation can be found in each

menu. For the hyper terminal in WINDOWS systemthe function

of cursor key is invalid, If using the third part hyper terminal

program, all the cursor key will be valid.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

46/64


Page 19 of 34

3.3.1 Hyper terminal main control menu

Fig.17 Hyper terminal main control menu

In this menu, there are 8 enus, 4 of them are used for selecting

submenuthe other 4 are used for Setup Default Parameter and

keep for parameters saving and quit out the hyper terminal

software updateShow as Fig.17.

The way entering submenu is first use D or U button to move

the menu item to all menu, then press Enter button entering the

related submenu.

Save parameters menu is used for saving the set value and

make them valid at once.

Default Parameter Setup is used for setting all value with

default value and make them valid at once.

software update is used for update system software and must

restart system to make software valid.

Exit menu used for quit the hyper terminal menu after operation.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

47/64


Page 20 of 34

3.3.2 System parameters set menu

Fig.18 System parameters set menu

First select the menu that you will modify, then press/button to

modify the related value of menuif press X button, then the value

will resume the value before.

Device ID is mainly used to set ID number. It is ignorable in the

hyper terminal operation.

System clock is mainly used to select the system clock source

that will trace during the system work.

Software reset is mainly used for software reset of the device.

Clear up all timeslot is mainly use to clear all time-slot that

configured before. If done so, 2 data ports will be invalid, and the

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

48/64


Page 21 of 34

E1 source in the network side will output to the E1 port in extend

side.

Node type is mainly used to set the type of networkmanagement. It is ignorable in the hyper terminal operation.

Com Buadrate is mainly used to set the baudrate of

CONSLOE,default value is 38400must restart system to make

it valid.

3.3.3 E1 Parameters set menu

Fig.19 E1 parameters set menu

In operation, first select the menu that you will modify, then press

/button to modify the related value in the menu.

CRC control menu is mainly used for verifying if the CRC set is

valid.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

49/64


Page 22 of 34

CCS/CAS control menu is mainly used for verifying if the 16th

timeslot of E1 is CCS or CAS enable.

Hual control menu is mainly used to set the receivingsensitivity of E1 Port, i.e. selecting lone distance or short

distance used.

HDLC TS Assign menu is mainly use to set the timeslot

number of HDLC working on the E1. Its set to be TS0 or idle

when used in the point-to-point application

Transmit Mode is mainly used to set E1 working in transparent

mode. It is invalid now for this function in this version

Master Channel menu is mainly used to set which E1 port is

used as network management main link. Its set idle in the hyper

terminal operation.

NOTES: CCS/CAS options, long/short distance E1 Receive

Mode/Transmit Mode setting is invalid when software version is 2.0

or above 2.0.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

50/64


Page 23 of 34

3.3.4 Data timeslot parameters set menu

Fig.20 Timeslot parameters set menu

Pressing / button to modify the value of menu. If you

press X button, then refresh the value before.

The way to set timeslot of the data port is to distribute the timeslot

from 1 to 31 that will use to the related port. The port can

be10Base-T or V.24. If set as Not used, then this timeslot will

directly connect to the E1 port in extend side.

Button F, When press, all timeslot will be set as not used.

Button G, When press, all timeslot will be set as port A.

Button H, When press, 1and 2 timeslot will be set as port B.

Button L and R, used for moving menu right or left.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

51/64


Page 24 of 34

Special note, the data port rate of V.24 cant exceed 128 Kbps,

otherwise the work will be abnormal.

3.3.5 Loop-back control menu

Fig.21 Loop-back control menu

Loop-back control menu is mainly used for device self-checking. If

you find the trouble of the device, you can analyze and check out

the trouble by means of looping-back.

Each loop-back control can help to confirm if any port has trouble.

Illustration

Network side/expanded side E1 interface loop by remote end:

Self-loop of network side/expanded side E1 interface towards the

outer of the equipment.

Network side/expanded side E1 interface loop by local end:

Loopback of network side/expanded side E1 interface towards

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

52/64


Page 25 of 34

the inner of the equipment.

PCM code stream loop by network side/expanded side:

Loopback at the PCM code stream inside the equipment towardsthe outer of Network side/ expanded side E1. (for the

manufacturers commissioning).

The data of port A/B loop by network side: Loopback at the TTL

stream of port A/B inside the equipment towards the outer of

Network side.

NOTES: The various loopback setting can only have one loopbackto have the effect, and all loopback change to the default value :

OFF when power down.

Explanation

3.3.6 software update Menu

Enteringsoftware updatemenupress1show as Fig.22

Data A/B port E1 port

Data A/B loop-back Remote loop-back

Local loop-back

PCM code stream

Loop-back

JS10B-M2B

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

53/64


Page 26 of 34

Fig.22 software update 1

EnteringTransferSend Fileshow as Fig.23


Browse and select the*.POFfile and select

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

54/64


Page 27 of 34

Xmodemprotocol,then pressSend, show as Fig.24


Now Entering software transfering proess, This process needs

about 5 minutes show as Fig.25


7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

55/64


Page 28 of 34

When the proess of file transferred finished,system check out

the downloaded file validityThis process needs about 3

minutes show as Fig.26


When downloaded file is validthen system begin to erase flash

and program flash, This process needs about 3 minutes show

as Fig.27

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

56/64


Page 29 of 34


When sofeware update finished, must restart the system to

make software valid show as Fig.28

Fig.28 software update

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

57/64


Page 30 of 34

4Installation application

4.1 Open box to check

Open the boxcheck the amount sort and count of the device and

fittings according to the Box list, if find abnormally, please contact

our company or the local office in time.

4.2 Power

Check power configuration. Input strictly according to the

requirement. Especially be noted to the positive & negative polarity

for the power.

4.3 Test

Check if the power on indication light PWR is brightif not,

indicate the power have trouble.

Test CONSOLE interfaceusing serial port cross line to connect

the CONSOLE port on device and COM port on PC. Open the

hyper terminal. If you can enter the hyper terminal control menu,

the CONSOLE port work normally.

Loop the E1 port in network side and extend side by self loop

line, then check the signal alarm light NLOS and ELOS

frame synchronization alarm light NRCL and ERCL on the

front board of the device if the light is off ,if not, indicate having

trouble. Point-to-point applicationthen distribute all the time slot of the 2

devices to 10Base-T port PING the 2 PCIf PING passed

indicate 10Base-T port work normally.

V.24 port testconnect one instrument at V.24 portthen loop

the E1 port in network side by self loop lineor loop by hyper

terminal. If the instrument passed, indicate V.24 port work

normally.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

58/64


Page 31 of 34

5

Typical application solution

5.1 System single terminal access network

Fig.29 System single terminal access network

Such application mainly used for network terminal access, can

provide 2 data access V.24 or 10Base-T port

5.2 System point-to-point network

This application is mainly used in point-to-point network. One

device is as master, and another one as slave. Two devices can be

connected directly by the E1 port of network-side or through E1

transmission network. If necessary, it can be used extendedly if

timeslot is enough.

Fig. 30 System Point-to-point network application

DDN Network

Data port

JS10B-M2B

E1 Transmission

Clock trace in network

Data Port

E1 transmission

Data port

Clock in device Clock trace in network side

JS10BJS10B

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

59/64


Page 32 of 34

5.3 Added and dropped access application

This application is mainly used for the data added access or

dropped access on the E1 line. See as below.

Such application is only suitable to the JS10B-M2B.

Fig.31 Added and dropped access application

DDN Net

Data Port

E1 trans

Tracing clockTracing clock

JS10B

E1 trans

Data port

E1 trans

JS10B

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

60/64


Page 33 of 34

5.4 Integration Data transmission application

Fig.32 Integration Data transmission application

Bus.Net.1,2,,n

E1 Trans.Net

E1

E1

LAN

JS10B

10BaseT

LAN

JS10B

10BaseT

Lar Acount Access

E1

Mon. Cen

N*V.24

Bill Centre

N*V.24

Net.M.Centre

OANet

E1

JS3030

MUX/DXC Device

JS10B

V.24/RS232

Mon./N.M 1,2,,n

PBXData coll.

V.24/RS232

10BaseT

E1E1

E1

JS10B

Bus.Net.Point

10BaseT

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

61/64


Page 34 of 34

6. Note item and fault operation

Strictly prohibit using the power supply that is different from the

power supply the device required, otherwise it will cause the

device damaged

Strictly prohibit system into waterstrictly prohibit using in the

occasion of causticity and impregnant.

Avoid using in strong magnetic field, or the system will work

abnormally. During the system trace the clock in network side, please ensure

if the clock in network side exist.

When not use E1 port in extend side, if the signal light flash,

indicate this E1 port is unstable. It is better to loop them back

using self loop line to avoiding the system working abnormally..

Fault phenomena, Power indication PWR green light is off,indicate the system power supply or the device have fault.

Fault phenomena, the NLOS or ELOS LED of signal indication

of E1 line is bright red, indicates the line break.

Fault phenomena, the NRCL or ERCL LED of signal indication of

E1 line frame synchronization is bright red, indicates the frame

synchronization signal is lost, or the CRC code verification have

errors in system terminals.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

62/64


SJ/T11363-2006

SJ/T11363-2006

announce

Declaration on Hazardous Substances in Electronic

Information Products

Hazardous SubstancesParts

Pb Hg Cd Cr6+ PBB PBDE

Plastic Shell

Board/circuit

module

Packing and

fittings

: Indicates that the concentration of the hazardous substance contained in allthe homogeneous materials of this part is below the limit requirement of theSJ/T 113632006 standard: Indicates that the concentration of the hazardous substance contained in allthe homogeneous materials of this part is above the limit requirement of the

SJ/T 113632006 standard.

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

63/64


Warranty Card

User Name

Contact Person

Phone No.

Model

Operation Testing Certificated Date

Maintenance Record

7/23/2019 JS10B-M2B Mini-MUX V2.3 20120802

64/64

If you have any query in the course of use, please contact with our

technical service center.

Company consultation & service center after sale

1 B1 3

519080

86-7568529777,8529037

86-7568529555

[email protected]

Address3F Bldg B1,Southern Software Park,No.1 Software

Road,Zhuhai,Guangdong,P.R.China

Postcode519080

Tel0086-756-8529777, 8529037

Fax0086-756-8529555

[email protected]

JS10B-M2B Mini-MUX V2.3 20120802

Documents

Transcript of JS10B-M2B Mini-MUX V2.3 20120802