IALT00059_FA_Brochure.pdf
3
IWAKI FA series Pneumatic Drive Bellows Pump The right p ump for the right job . The F A Series bellow s pump addr esses low flow and high flow r equirements at low to medium temperatures (5 to 100°C). The FA-2E pump is for precise chemical delivery for flow rates up to 0.5 gpm (2 L/min). The F A-40 pump is excelle nt for app lica tions requir ing hi gh volu me flow, su ch as large wafer processing, delivering up to 11.6 gpm (50 L/min). The F A-40 is constructed vertically to optimize precious cabinet space. All liquid ends are constructed of fluoropolymers for purity and corrosion resistance. The PTFE bellows are rugged and proven to withstand long term continuous operation and high pressure resistance better than any other pump. Leak detection and drive sensing enhance the reliability and safety of these pneumatic pumps. Model FA-2E F A-40VEW Maximum discharge capacity 0.5 gal (2 L/min) 10.6 gal (20 L/min) Maximum stroke speed 150 spm 80 spm Liquid temperature range 41-212°F (5-100°C) 68-212°F (20-100°C) Maximum air supply pressure 57 psi (4 kg/cm 2 ) 57 psi (4 kg/cm 2 ) Maximum air consumption 13.2 CFM (50 NL/min) 7.1 CFM (200 NL/min) Pump connection size PFA 3/8” PF A 1” Supply air connection size* PT 1/4” PT 3/8” *NPT conversion fittings are available
-
Upload
omaryehude -
Category
Documents
-
view
220 -
download
0
Transcript of IALT00059_FA_Brochure.pdf
-
IWAKI FAseries
Pneumatic Drive Bellows Pump
The right pump for the right job. The FA Series bellows pump addresses low flow and high flow requirements at low to medium temperatures (5 to 100C). The FA-2E pump is for precise chemical delivery for flow rates up to 0.5 gpm (2 L/min). The FA-40 pump is excellent for applications requiring high volume flow, such as large wafer processing, delivering up to 11.6 gpm (50 L/min). The FA-40 is constructed vertically to optimize precious cabinet space.
All liquid ends are constructed of fluoropolymers for purity and corrosion resistance. The PTFE bellows are rugged and proven to withstand long term continuous operation and high pressure resistance better than any other pump.
Leak detection and drive sensing enhance the reliability and safety of these pneumatic pumps.
Model FA-2E FA-40VEW
Maximum discharge capacity 0.5 gal (2 L/min) 10.6 gal (20 L/min)
Maximum stroke speed 150 spm 80 spm
Liquid temperature range 41-212F (5-100C) 68-212F (20-100C)
Maximum air supply pressure 57 psi (4 kg/cm2) 57 psi (4 kg/cm2)
Maximum air consumption 13.2 CFM (50 NL/min) 7.1 CFM (200 NL/min)
Pump connection size PFA 3/8 PFA 1
Supply air connection size* PT 1/4 PT 3/8
*NPT conversion fittings are available
-
www.IwakiAmerica.com
Five Boynton Road Holliston, MA 01746 USA Tel: 508-429-1440 Fax: 508-429-1386 [email protected]
IALT-00059.D Aug 2012
FAseries
57 PSI
43 PSI
28 PSI 28 PSI(2 kgf/cm2)
43 PSI(3 kgf/cm2)
57 PSI(4 kgf/cm2)
57 PSI(4 kgf/cm2)
43 PSI(3 kgf/cm2)
28 PSI(2 kgf/cm2)
14 PSI(1 kgf/cm2)
70
60
50
40
30
20
10
5
4
3
2
1
10 20 30 40 50 60 70
200 400 600 800 1000 GPH
LPMFLOW
PSI kgf/cm2PSI kgf/cm2
50
40
30
20
10
1
2
3
FLOW1 2 3
10 20 30 40 50 GPH
LPM
CF/m NL/m CF/m NL/m
300
250
200
150
100
501.8
3.5
5.3
7.1
8.8
10.6
Discharge PressureAir
ConsumptionDischarge PressureAir
Consumption
1.4
1.1
.71
.35 10
20
30
40
FA-2E FA-40VEW
57 PSI
43 PSI
28 PSI 28 PSI(2 kgf/cm2)
43 PSI(3 kgf/cm2)
57 PSI(4 kgf/cm2)
57 PSI(4 kgf/cm2)
43 PSI(3 kgf/cm2)
28 PSI(2 kgf/cm2)
14 PSI(1 kgf/cm2)
70
60
50
40
30
20
10
5
4
3
2
1
10 20 30 40 50 60 70
200 400 600 800 1000 GPH
LPMFLOW
PSI kgf/cm2PSI kgf/cm2
50
40
30
20
10
1
2
3
FLOW1 2 3
10 20 30 40 50 GPH
LPM
CF/m NL/m CF/m NL/m
300
250
200
150
100
501.8
3.5
5.3
7.1
8.8
10.6
Discharge PressureAir
ConsumptionDischarge PressureAir
Consumption
1.4
1.1
.71
.35 10
20
30
40
Dimensions in inches (mm)
Performance Curves
FA-2E
FA-40VEW
Dimensions subject to change without notice. Consult your local distributor for current information.
