NTP_SERVER=0.in.pool.ntp.orgNTP_SERVER=1.in.pool.ntp.orgNTP_SERVER=2.in.pool.ntp.orgNTP_SERVER=3.in.pool.ntp.orgNTP_SERVER=0.asia.pool.ntp.orgNTP_SERVER=1.asia.pool.ntp.orgNTP_SERVER=2.asia.pool.ntp.orgNTP_SERVER=3.asia.pool.ntp.orgNTP_SERVER=in.pool.ntp.orgXTRA_SERVER_1=/data/xtra.binAGPS=/data/xtra.binAGPS=http://xtra1.gpsonextra.net/xtra.binXTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.binXTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.binXTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.binDEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info# 4 - Debug, 5 - VerboseDEBUG_LEVEL =0# Intermediate position report, 1=enable, 0=disableINTERMEDIATE_POS=0# Accuracy threshold for intermediate positions# less accurate positions are ignored, 0 for passing all positionsACCURACY_THRES=5000# Report supl ref location as position, 1=enable, 0=disableREPORT_POSITION_USE_SUPL_REFLOC=1# Wiper (wifi positioning), 1=enable, 0=disableENABLE_WIPER=1##################################### AGPS server settings ###################################### FOR SUPL SUPPORT, set the followingSUPL_HOST=supl.google.comSUPL_PORT=7276SUPL_NO_SECURE_PORT=3425SUPL_SECURE_PORT=7275SUPL_TLS_HOST=FQDNSUPL_TLS_CERT=/etc/SuplRootCert# FOR C2K PDE SUPPORT, set the followingC2K_HOST=c2k.pde.com C2K_PORT=1234DEFAULT_AGPS_ENABLE=TRUEDEFAULT_USER_PLANE=TRUEQOS_ACCURACY=50QOS_TIME_OUT_STANDALONE=60QOS_TIME_OUT_agps=89QosHorizontalThreshold=1000QosVerticalThreshold=500AssistMethodType=1AgpsUse=1AgpsMtConf=0AgpsMtResponseType=1AgpsServerType=1AgpsServerIp=3232235555INTERMEDIATE_POS=1CURRENT_CARRIER=common