For agricultural machinery 170 - 276 kW|228 - 370 hp at...
Transcript of For agricultural machinery 170 - 276 kW|228 - 370 hp at...
�������
For agricultural machinery 170 - 276 kW|228 - 370 hp at 2200 min-1|rpmEU Stage IIIB / US EPA Tier 4 interim
Water-cooled 6-cylinder inline engine with turbocharging, charge air cooling and cooled external exhaust gas recir-culation.
The powerful DEUTZ Common Rail (DCR®) injection system and efficient combustion management with cooled external exhaust gas recirculation en-sure optimum engine performance at low fuel consumption.
Best cold starting properties even under extreme conditions. Thanks to SCR technology, the cooler
sizes do not need to be enlarged in comparison with Tier 3 engines. Fuel consumption is reduced.
The extremely compact engine design with structural oil pan and a customer-oriented, modular system of optional add-on parts reduce the installation costs and increase the number of appli-cations.
Long oil change intervals and easy changing of the engine fluids reduce the running costs and increase the availa-bility of the machinery.
Both engines meet the requirements of the EU Stage IIIB and US EPA Tier 4 in-terim.
Technical data
The data on this data sheet are for information purposes only and are not binding values. The data in the quotation is definitive.
Engine type TCD 7.8 L6No. of cylinders 6Bore/stroke mm | in 110/136 |4.3/5.4Capacity l | cu in 7.8 |476Compression ratio 18:1Max. nominal speed min-1 | rpm 2200
Power output1) TCD 7.8 L6Power output as per ISO 14396 kW | hp 276 |370at speed min-1 | rpm 2200Max. power kW | hp 290 |389at speed min-1 | rpm 2000Max. torque Nm | lb/ft 1530 |1128at speed min-1 | rpm 1500Minimum idling speed min-1 | rpm 600Specific fuel consumption2) g/kWh | lb/hph 199Weight as per DIN 70020 Part 7A3) kg | lb 995 |2194
1) Capacity data without deduction of fan capacity2) Best full load consumption refers to diesel with a density of 0.835 kg/dm3 at 15°C | 6.96 lb/US gallon at 60°F.3) Without starter/dynamo, cooler and fluids but with flywheel and flywheel housing.
Ord
er n
o. 0
031
2310
/ 10
/ 20
11 /
VC-C
M
For more information please contact the DEUTZ AG Köln or the responsible sales partner.
Torque curve
Dimensions
Note: The engine dimensions and weights vary depending on the scope of delivery.
TCD 7.8 L 6 - 276 kW|370 hp
(kW
/hp)
POW
ER (N
m/lb
-ft)
TOR
QU
E
����
����
����
����
����
����
����
��
���
����
����
����
��� ���� ���� ���� ��� �������� ���� ����
���
���
���
���
����
���
����
����
����
����
���
�
�� ���� ���� ���� ��� ����� ���� ����
A
C
B
L
D
DVERT® Exhaust Aftertreatment SystemA B C D L SCR
TCD 7.8 L6 mm | in 1224 |48.2 692 |27.2 1358 |53.5 353 |13.9 375 |14.8
DEUTZ AG ⋅ Ottostraße 1 ⋅ 51149 Köln ⋅ Deutschland ⋅ Telefon +49 (0) 221 822-0 ⋅ Telefax +49 (0) 221 822-3525 ⋅ www.deutz.com ⋅ E-Mail: [email protected]