Summary

This is a spool for 50-100g 1.75mm filament samples such as the onesincluded in MakerBox subscriptions (version A also fits the original zipperbags) ;)

Here's a referral link if you'd like to check it out :)

I have also included a spool for 150-200g 1.75mm filaments such ascleaning and high density which tend to be sold in small quantities orlarger samples.

The design is inspired by the Prusament filament spools but redesignedfrom scratch for much smaller size.

There are included holes for one end of the filament (2mm) to help withthe initial wrap but should be loose enough to allow the end to slip outwhen the filament is running out during print.

You can use any of the honeycomb holes on the sides to hold the looseend of the filament when not in use.

PyScripts

Filament SampleSpool (honeycomb)

VIEW IN BROWSER

updated 20. 10. 2019 | published 24. 4. 2019

18 hrs

3 pcs

f

0.15 mm

k

0.40 mm

h

PLA

112 g

d

MK3/S

Print Files (.gcode) DOWNLOAD ALL FILES

6.9 MB

4.43 hrs f 0.15 mm k 0.40 mm h PLA 26.00 g d MK3/S

updated 24. 4. 2019

9.6 MB

5.57 hrs f 0.15 mm k 0.40 mm h PLA 35.00 g d MK3/S

updated 24. 4. 2019

15.0 MB

7.53 hrs f 0.15 mm k 0.40 mm h PLA 51.00 g d MK3/S

updated 24. 4. 2019

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

For 50-100g use: Bottom_A Top

For 150-200g use: Bottom_B Top

3D Printers > Other Accessories

makerbox honeycomb filamentspool spool sample

prusament

Rafts: No Supports: No Resolution: 0.15mm Infill: 10-15%

top_v16_015mm_pla_mk3s.gcode

bottom_a_v20_015mm_pla_mk3s.gcode

bottom_b_v4_015mm_pla_mk3s.gcode

1.7 MBupdated 24. 4. 2019

1.6 MBupdated 24. 4. 2019

1.6 MBupdated 24. 4. 2019

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-ShareAlike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

bottom_b_v4.stl

bottom_a_v20.stl

top_v16.stl