Fiber Optic

Your Source for Fiber Optic Cable Technology

Power & Tel offers optical fibers in several grades to manage the bandwidth requirements of today and tomorrow’s voice, data and video networks. Cables are available from the following leading manufacturers:• AFL

• Belden

• Commscope

• Corning

• Draka

• OCC

• OFS

• Prysmian

• Sumitomo

• SumitomoABF

• SuperiorEssex

Definition of TermsSingleMode:Enhanced single mode fiber (ESMF) features improved attenuation and optical loss performance. Low Water Peak (LWP) and Zero Water Peak (ZWP), Non-Zero Dispersion-Shifted (NZDSF) and bend-insensitive versions are available.

Multimode:Multimode fiber (MM) provides superior performance for many short distance and premise networks. Many constructions are available to meet the needs of all outdoor and indoor applications in standard grade 62.5 FDDI to laser-optimized 50μm versions.

GelFree:Power & Tel defines “gel free” fiber optic cables as cables with no water blocking gel between or in the buffer tubes. Cables with no water blocking gel between the buffer tubes only are described as dry.

PleasenotethatcabledescriptionsanddatainthissectionofourcatalogarebasedonDrakaspecifications.

(800) 238-7514 www.ptsupply.comWe work where you work. 1

GradeFiber

Size(μ)Standards

ComplianceLinkLength

(m)Data

Rate(Gb)

Multimode

6 50/125exceeds TIA/EIA-568-B.3-1 ISO 11801 0M3

500 10

5 50/125 TIA/EIA-568-B.3-1 ISO 11801 0M3 300 10

4 50/125 TIA/EIA-568-B.3-1 600 1

3 62.5/125 TIA/EIA-568-B.3-1 1,000 1

2 62.5/125 TIA/EIA-568-B.3-1 550 1

1 62.5/125 FDDI grade † - -

SingleMode*

- - ITU G.652.c/d†† - -*Multiple single mode grades and constructions in stock. Call for details.†Used in most current cable plants, but not recommended for future installations except as patch cordage††Low water peak fiber with advantages for CWDM applications

Fiber Selection Chart Jacket Color Chart

CableType JacketColor

Loose Tube & Outside Plant Black

Industrial Tray Orange

Tight Buffered Grades 2, 3, 4 Orange

Tight Buffered Grades 5, 6 Aqua

Tight Buffered Single Mode YellowNon-standard jacket colors are available upon request

Fiber Sub-Unit Color Code Chart Per/TIA 598-A

Fiber/TubeNo. Color

1 Blue

2 Orange

3 Green

4 Brown

5 Slate

6 White

Fiber/TubeNo. Color

7 Red

8 Black

9 Yellow

10 Violet

11 Rose

12 Aqua

1OFL = Overfilled Launch2Effective Modal Bandwith, determined by RML or DMD performance specifications3Max. Attentuation for Tight Buffered, Ribbon, Micro-Loose Tube and Loose Tube Plenum Cable

4S/L = Short wavelength (850nm)/Long wavelength (1310nm)5>2,000 meters for engineered links6Low water peak single mode suitable for CWDM use complies with ITU G.652.c/d

Grade 2 3 4 5 6 SingleModeEnhanced6GlassType 62.5/125μ 62.5/125μ 50/125μ 50/125μ 50/125μ

OperatingWavelength(nm) 850/1,300 850/1,300 850/1,300 850/1,300 850/1,300 1,310/1,550

Min.OFL1Bandwidth(MHz-km) 200/500 200/500 500/500 1,500/500 3,000/500 -

Min.Laser2Bandwidth(MHz-km) 220/500 385/500 510/500 2,000/500 4,000/500 -

Max.AttenuationLooseTube(dB/km) 3.25/1 3.25/1 3/1 3/1 3/1 .4/.3

Max.AttenuationTightBuffered3(dB/km) 3.5/1.25 3.5/1.25 3.5/1.25 3.5/1.25 3.5/1.25 .8/.5

100MbFastEthernetMin.LinkLength(metersS/L4) 300/2,000 300/2,000 300/2,000 300/2,000 300/2,000 —/5,000

1GbEthernetMin.LinkLength(metersS/L4) 300/550 500/1,000 600/600 1,0005/600 1,0005/600 —/5,000

10GbEthernetMin.LinkLength(metersS/L4) 35/300 35/300 85/300 300/300 500/300 —/10,000

Optical Specifications

Fiber Optic Cable

(800) 238-7514 www.ptsupply.comWe work where you work.2

Loose Tube Single Jacket Dielectric and ArmoredSingle Mode (ESMF, NZDSF), Multimode, Hybrid

ApplicationsLoose tube cables provide versatile performance for aerial lashed, duct, and direct buried installations. These cables combine adhesive armor, flexible tubes and swellable dry water-blocking.

Constructions Dielectric, armored, single jacketFiberCount 2 to 432 fibers in color-coded buffer tubes

Options Preconnectorized, gel-filled core, steel central member, copper pair(s)

OtherVersions Central, heavy duty, indoor-outdoorPerformance ANSI/ICEA, IEC, RDUP, Telcordia GR-20

MaximumInstallationLoad 600 lbf (2670N)

MaximumOperationLoad 180 lbf (800N)

ShippingandStorage -40°F to 167°F (-40°C to 75°C)

Installation -22°F to 140°F (-30°C to 60°C)Operation -40°F to 158°F (-40°C to 70°C)

Specifi cations

Features & BenefitsEasy Cable Entry and Preparation• Adhesive bond armor greatly improves mid-entry• Ripcord speeds cable entry and outer jacket removal• Dry core swellable binders speed cable prep

Flexible Routing and Termination• Up to 20' buffer tube storage length supports multi-vendor FTTx

pedestals, closures and cabinets• Flexible buffer tubes simplify routing and splicing prep• Available with BendBright® and BendBright®XS bend-tolerant

single mode fiber

Multi-Purpose Installation and Use• Small diameter and light weight extend installation length• Optional corrugated steel tape armor provides mechanical protection

and rodent resistance

Central Strength Member

Optical Fibers

Flexible Buffer Tubes (2.7mm)

Water Blocking BindersStrength YarnsRipcord

Jacket (PE)

Single Jacket Dielectric

Outdoor Fiber


FiberCount No.BufferTubes inch mm lb/K-ft kg/km inch cm inch cm

2 to 60 5 .42 10.6 53 79 8 21 4 11

62 to 72 6 .45 11.5 63 94 9 23 5 11

74 to 84 7 .49 12.3 72 107 10 25 5 12

86 to 96 8 .53 13.4 82 122 11 27 5 13

98 to 108 9 .56 14.2 90 134 11 28 6 14

110 to 120 10 .60 15.1 99 147 12 30 6 15

122 to 132 11 .63 16.1 109 162 13 32 6 16

134 to 216 18 .67 16.9 126 187 13 34 7 17

218 to 264 22 .74 18.9 153 228 15 38 7 19

266 to 288 24 .77 19.6 167 248 15 39 8 20

290 to 432* 18 .73 18.6 153 228 15 37 7 19

Diameter Load NoLoad

BendRadiusApproximateCableWeight

Loose Tube Dielectric Single Jacket


2 to 60 5 .48 12.2 98 146 10 24 7 18

62 to 72 6 .51 13.0 109 162 10 26 8 20

74 to 84 7 .55 14.0 122 182 11 28 8 21

86 to 96 8 .59 15.0 135 201 12 30 9 23

98 to 108 9 .62 15.8 146 218 12 32 9 24

110 to 210 10 .66 16.8 161 240 13 34 10 25

122 to 132 11 .69 17.6 171 255 14 35 10 26

134 to 216 18 .73 18.6 195 291 15 37 11 28

218 to 264 22 .81 20.6 231 344 16 41 12 31

266 to 288 24 .84 21.4 242 360 17 43 13 32

290 to 432* 18 .80 20.3 225 335 16 41 12 31



Loose Tube Armored Single Jacket

*Cables with fiber counts greater than 288 contain 24 fibers in a larger PBT buffer tube with 12 fiber binder groups. Rated buffer storage is 8' (2.4m).

Outdoor Fiber


Loose Tube Double Jacket Dielectric, Armored, Double ArmoredSingle Mode (ESMF, NZDSF), Multimode, Hybrid

ApplicationsMulti-purpose outdoor performance for aerial lashed, duct and direct buried installations.

Constructions Dielectric, armored, double armored, double jacketFiberCount 2 to 432 fibers in color-coded buffer tubes

Options Preconnectorized, gel-filled core, steel central member, copper pair(s)

OtherVersions Central, heavy duty, indoor-outdoorPerformance ANSI/ICEA, IEC, RDUP, Telcordia GR-20

MaximumInstallationLoad 600 lbf (2670N)


ShippingandStorage -40°F to 167°F (-40°C to 75°C)Installation -22°F to 140°F (-30°C to 60°C)

Operation -40°F to 158°F (-40°C to 70°C)

Specifi cations

Features & BenefitsEasy Cable Entry and Preparation• Adhesive bond armor greatly improves mid-entry• Ripcord speeds cable entry and outer jacket removal• Dry core swellable binders speed cable prep


pedestals, closures and cabinets• Flexible buffer tubes simplify routing and splicing prep




Optical Fibers


Water Blocking BindersStrength Yarns

Armor (corrugated steel)

Ripcord

Jacket (PE)


Jacket (PE)

Double Jacket Double Armored

Outdoor Fiber


Loose Tube Dielectric Double Jacket


2 to 60 5 .54 13.8 118 175 11 28 8 21

62 to 72 6 .57 14.5 138 205 11 29 9 22

74 to 84 7 .61 15.5 153 228 12 31 9 23

86 to 96 8 .65 16.6 170 253 13 33 10 25

98 to 108 9 .68 17.3 182 272 14 35 10 26

110 to 210 10 .72 18.3 201 300 14 37 11 28

122 to 132 11 .75 19.1 212 315 15 38 11 29

134 to 216 18 .79 20.1 239 356 16 40 12 30

218 to 264 22 .87 22.1 283 421 17 44 13 33

266 to 288 24 .90 22.9 295 439 18 46 14 34

290 to 432* 18 .87 22.1 279 415 17 44 13 33



Loose Tube Armored Double Jacket

*Cables with fiber counts greater than 288 contain 24 fibers in a larger PBT buffer tube with 12 fiber binder groups. Rated buffer storage is 8' (2.4m).


2 to 60 5 .48 12.1 68 101 10 24 5 12

62 to 72 6 .51 13.0 83 124 10 26 5 13

74 to 84 7 .55 13.9 91 136 11 28 5 14

86 to 96 8 .59 15.0 103 153 12 30 6 15

98 to 108 9 .62 15.7 111 165 12 31 6 16

110 to 120 10 .66 16.7 123 182 13 33 7 17

122 to 132 11 .69 17.6 132 196 14 35 7 18

134 to 216 18 .73 18.4 149 221 15 37 7 18

218 to 264 22 .80 20.4 184 274 16 41 8 20

266 to 288 24 .83 21.2 192 286 17 42 8 21

290 to 432* 18 .79 20.1 182 271 16 41 8 20



Loose Tube Double Armored Double Jacket

DiameterFiberCount No.BufferTubes inch mm lb/K-ft kg/km inch cm inch cm

2 to 60 5 .67 17.1 205 306 13 34 10 26

62 to 72 6 .70 17.8 232 346 14 36 11 27

74 to 84 7 .74 18.8 253 377 15 38 11 28

86 to 96 8 .78 19.9 274 408 16 40 12 30

98 to 108 9 .81 20.6 288 428 16 41 12 31

110 to 210 10 .85 21.6 315 468 17 43 13 32

122 to 132 11 .88 22.4 330 492 18 45 13 34

134 to 216 18 .92 23.4 359 535 18 47 14 35

218 to 264 22 1.00 25.5 414 616 20 51 15 38

266 to 288 24 1.03 26.2 429 638 21 52 15 39

290 to 432* 18 1.01 25.7 416 619 20 51 15 38

Load NoLoad


Outdoor Fiber



Optical Fibers


Water Blocking Binders

Strength YarnsRipcord

Jacket (PE)

Dielectric

Loose Tube Gel-Free* Dielectric and Armored Single Jacket, Single Armored Double JacketSingle Mode (ESMF, NZDSF), Multimode, Hybrid

ApplicationsMulti-purpose outdoor performance for aerial lashed, duct and direct buried installations.

Constructions Dielectric, armored, single and double jacketFiberCount 4 to 432 fibers in color-coded buffer tubes

Options Preconnectorized, steel central member, copper pair(s)

OtherVersion Gel-free indoor/outdoorPerformance ANSI/ICEA, IEC, RDUP, Telcordia GR-20

MaximumInstallationLoad 600 lbf (2,670N)




Specifi cations

Features & BenefitsEasy Cable Entry and Preparation• Gel-free water blocked design simplifies access and reduces prep time

by 15 minutes per cable end• Adhesive bond armor greatly improves mid-entry• Ripcord speeds cable entry and outer jacket removal• Dry core swellable binders speed cable preparation


pedestals, closures and cabinets• Flexible buffer tubes simplify routing and splicing preparation



Armored


Optical Fibers


Water Blocking BindersStrength Yarns


Ripcord

Jacket (PE)

*Power&Teldefines“gelfree”fiberopticcablesascableswithnowaterblockinggelbetweenorinthebuffertubes.Cableswithnowaterblockinggelbetweenthebuffertubesonlyaredescribedasdry.

Outdoor Fiber


Loose Tube Dielectric Gel-Free Single Jacket


4 to 60 5 .42 10.6 47 71 8 21 4 11

72 6 .45 11.5 56 84 9 23 5 11

84 7 .49 12.3 64 95 10 25 5 12

96 8 .53 13.4 73 108 11 27 5 13

108 9 .56 14.2 80 119 11 28 6 14

120 10 .60 15.1 87 130 12 30 6 15

132 11 .63 16.1 96 143 13 32 6 16

144 to 216 18 .67 16.9 105 156 13 34 7 17

228 to 264 22 .74 18.9 128 190 15 38 7 19

276 to 288 24 .77 19.6 139 207 15 39 8 20

290 to 432 36 .87 22.1 187 278 18 44 9 22



Loose Tube Armored Gel-Free Single Jacket


4 to 60 5 .48 12.2 93 138 10 24 7 18

72 6 .51 13.0 102 152 10 26 8 20

84 7 .55 14.0 114 170 11 28 8 21

96 8 .59 15.0 126 187 12 30 9 23

108 9 .62 15.8 136 203 12 32 9 24

120 10 .66 16.8 150 223 13 34 10 25

132 11 .69 17.6 159 236 14 35 10 26

144 to 216 18 .73 18.6 175 260 15 37 11 28

228 to 264 22 .81 20.6 206 306 16 41 12 31

276 to 288 24 .84 21.4 214 319 17 43 13 32

290 to 432 36 .95 24.1 254 378 19 48 10 24




4 to 60 5 .54 13.8 112 167 11 28 8 21

72 6 .57 14.5 131 195 11 29 9 22

84 7 .61 15.5 145 216 12 31 9 23

96 8 .65 16.6 160 239 13 33 10 25

108 9 .68 17.3 172 257 14 35 10 26

120 10 .72 18.3 190 283 14 37 11 28

132 11 .75 19.1 199 296 15 38 11 29

144 to 216 18 .79 20.1 218 325 16 40 12 30

228 to 264 22 .87 22.1 257 383 17 44 13 33

276 to 288 24 .90 22.9 267 398 18 46 14 34

290 to 432 36 1.00 25.4 291 433 20 51 10 26



Loose Tube Gel-Free Single Armored Double Jacket

Outdoor Fiber


Integrated Messenger (.25" EHS Steel)

Flexible Buffer Tubes (3mm)


Ripcord

Jacket (PE)

Optical Fibers

Non-Armored

Armored

Loose Tube Figure-8 Self-Supporting Non-Armored and ArmoredSingle Mode (ESMF, NZDSF), Multimode, Hybrid

ApplicationsOne-step aerial deployment for up to 600' with integrated steel messenger. Installation uses existing Figure-8 hardware and methods.

Constructions Non-armored and armored with 1/4" integrated messenger

FiberCount 2 to 216 fibers in color-coded buffer tubesOptions Preconnectorized, gel-filled core

Performance ANSI/ICEA, IEC, RDUP, Telcordia GR-20Maximum

MessengerLoad 2,600 lbf (11,500N)

MaximumSpanDistances

Heavy Load: 350' to 400' (107m to 122m)Medium Load: 550' to 600' (168m to 183m)Light Load: 600' (183m)



Specifi cations

Features & BenefitsEasy Cable Entry and Preparation• Adhesive bond armor greatly improves mid-entry• Ripcord speeds cable entry and outer jacket removal• Swellable binders speed cable preparation

Flexible Routing and Termination• Flexible buffer tubes simplify routing and splicing preparation

Integrated Messenger (.25" EHS Steel)



Ripcord

Jacket (PE)

Optical Fibers

Armor

Outdoor Fiber


FiberCount inch mm inch mm lb/K-ft kg/km inch cm inch cm

2 to 72 .51 12.9 .96 24.3 225 335 10 26 5 13

74 to 84 .54 13.8 .99 25.3 235 350 11 28 6 14

86 to 96 .59 15.0 1.04 26.5 247 367 12 30 6 15

98 to 108 .63 15.9 1.07 27.3 257 383 13 32 7 16

110 to 120 .66 16.9 1.12 28.4 269 400 13 34 7 17

122 to 132 .70 17.8 1.16 29.4 281 418 14 35 7 18

134 to 216 .74 18.8 1.19 30.3 304 452 15 37 8 19

Loose Tube Non-Armored Figure-8 Self-Supporting


BendRadiusApproximateCableWeightHeight

FiberCount inch mm inch mm lb/K-ft kg/km inch cm inch cm

2 to 72 .56 14.1 1.02 26.0 279 416 11 29 9 21

74 to 84 .59 15.1 1.06 27.0 293 436 12 31 9 23

86 to 96 .64 16.3 1.11 28.2 310 462 13 33 10 25

98 to 108 .67 17.1 1.14 29.0 323 480 14 35 10 26

110 to 120 .72 18.2 1.18 30.1 338 503 14 37 11 28

122 to 132 .76 19.2 1.22 31.1 354 527 15 39 12 29

134 to 216 .79 20.1 1.26 32.0 381 567 16 42 12 30

Loose Tube Armored Figure-8 Self-Supporting


BendRadiusApproximateCableWeightHeight

Outdoor Fiber


Loose Tube ADSS Self-Supporting Short Span Single JacketSingle Mode (ESMF, NZDSF), Multimode, Hybrid

ApplicationsSelf-supporting aerial deployment for communications and transmission space for up to 1,000'.

Features & BenefitsEasy Cable Entry and Preparation• Flexible buffer tubes and single jacket option enhance mid-entry• Ripcord speeds cable entry and outer jacket removal• Swellable binders speed cable preparation


Versatile Installation and Use• Tailored designs span distances up to 1,000' without interrupting power• Easy mid-entry is ideal for FTTx distribution applications

Constructions All-dielectric round, single jacketFiberCount 2 to 144 fibers in color-coded buffer tubes

Options Single or dual jackets (see page 12),matching pole attachment hardware

Performance IEEE 1222 ANSI/ICEA, IEC, RDUP, Telcordia GR-20

MinimumBendRadius

With Load: 20x cable diameterNo Load: 10x cable diameter



Specifi cations

Optical Fibers



Strength Yarns

Ripcord

Jacket (PE)

Short Span Single Jacket

Outdoor Fiber


Count feet meter inch mm lb/K-ft kg/km inch mm lb/K-ft kg/km inch mm lb/K-ft kg/km

2to72

200 61 .48 12.3 74 110 .48 12.3 74 110 .48 12.3 74 110

300 91 .48 12.3 74 110 .48 12.3 74 110 .49 12.4 75 112

400 122 .48 12.3 74 110 .49 12.3 74 110 .50 12.7 78 116

500 152 .48 12.3 74 110 .49 12.5 76 113 .51 13.0 81 121

600 183 .49 12.4 75 111 .50 12.6 78 115 - - - -

700 213 .49 12.5 76 114 .50 12.8 80 119 - - - -

800 244 .50 12.6 78 115 .51 13.0 81 121 - - - -

900 274 .50 12.8 79 118 - - - - - - - -

1,000 305 .51 12.9 80 120 - - - - - - - -

74to96

200 61 .57 14.4 94 140 .57 14.4 94 140 .57 14.4 94 140

300 91 .57 14.4 94 140 .57 14.4 94 140 .58 14.6 97 144

400 122 .57 14.4 94 140 .57 14.6 96 142 .59 14.9 100 149

500 152 .57 14.5 95 142 .58 14.7 97 145 - - - -

600 183 .58 14.6 97 144 .58 14.8 99 148 - - - -

700 213 .58 14.8 98 146 .59 15.5 102 151 - - - -

800 244 .59 14.9 100 149 - - - - - - - -

900 274 .59 15.0 102 151 - - - - - - - -

98to144

200 61 .74 18.7 141 210 .74 18.7 141 210 .74 18.7 142 211

300 91 .74 18.7 141 210 .74 18.7 142 212 .74 18.9 145 216

400 122 .74 18.8 143 213 .74 18.8 144 215 - - - -

500 152 .74 18.9 145 216 .75 19.0 147 219 - - - -

600 183 .75 19.0 147 219 - - - - - - - -

Loose Tube ADSS Self-Supporting Short Span Single Jacket

NESCLight,1%Sag NESCMedium,1%Sag NESCHeavy,1%Sag

Fiber Span Diameter Weight Diameter Weight Diameter Weight

Contact your Power & Tel Account Manager for information about designs with alternative span requirements or cable diameters. Cable diameters and weights may vary depending on specific span requirements.

Outdoor Fiber


Loose Tube ADSS Self-Supporting Short Span Double JacketSingle Mode (ESMF, NZDSF), Multimode, Hybrid


Constructions All-dielectric round, double jacketFiberCount 2 to 144 fibers in color-coded buffer tubes

Options Single (see page 10) or dual jackets, matching pole attachment hardware


MinimumBendRadius




Specifi cations

Features & BenefitsEasy Cable Entry and Preparation• Flexible buffer tubes and single jacket option enhance mid-entry• Ripcord speeds cable entry and outer jacket removal• Swellable binders speed cable preparation


Versatile Installation and Use• Tailored designs span distances up to 1,000' without interrupting power• Easy mid-entry is ideal for FTTx distribution applications

Optical Fibers



Strength Yarns

Ripcord

Jacket (PE)

Jacket (PE)

Ripcord

Short Span Double Jacket

Outdoor Fiber



2to72

200 61 .55 13.8 95 141 .55 13.8 95 141 .55 13.8 95 141

300 91 .55 13.8 95 141 .55 13.8 95 141 .55 14.0 98 145

400 122 .55 13.8 95 141 .55 14.0 97 144 .56 14.3 101 150

500 152 .55 13.9 96 143 .56 14.1 98 146 .57 14.5 104 155

600 183 .55 14.0 98 145 .56 14.2 100 149 - - - -

700 213 .56 14.2 99 148 .57 14.4 102 153 - - - -

800 244 .56 14.3 101 150 - - - - - - - -

900 274 .57 14.4 102 152 - - - - - - - -

74to96

200 61 .63 16.0 119 177 .63 16.0 119 177 .63 16.0 119 177

300 91 .63 16.0 119 177 .63 16.0 119 177 .64 16.2 122 182

400 122 .63 16.0 119 177 .64 16.2 121 180 .65 16.4 125 187

500 152 .64 16.2 121 180 .64 16.3 123 184 .66 16.7 129 192

600 183 .64 16.3 123 183 .65 16.4 125 187 - - - -

700 213 .65 16.4 125 186 .65 16.6 128 191 - - - -

800 244 .65 16.5 126 188 - - - - - - - -

900 274 .66 16.7 129 192 - - - - - - - -

98to144

200 61 .80 20.2 173 257 .80 20.2 173 257 .80 20.3 174 259

300 91 .80 20.3 174 259 .80 20.3 175 260 .81 20.5 178 265

400 122 .80 20.4 176 262 .81 20.5 177 263 .82 20.7 182 271

500 152 .81 20.5 178 265 .81 20.6 180 268 .82 20.9 186 277

600 183 .81 20.6 180 268 .82 20.8 183 272 - - - -

700 213 .82 20.8 183 272 .82 20.9 186 277 - - - -

800 244 .82 20.9 186 277 - - - - - - - -

Loose Tube ADSS Self-Supporting Short Span Double jacket




Outdoor Fiber


Loose Tube ADSS Self-Supporting Long Span Single JacketSingle Mode (ESMF, NZDSF), Multimode, Hybrid


Features & BenefitsEasy Cable Entry and Preparation• Ripcord speeds cable entry and outer jacket removal• Swellable binders speed cable preparation

Proven Long Span Installation and Use• Tailored designs span distances up to 2,500' without interrupting power• Matching pole attachment hardware (dead-ends, suspension clamps)

Constructions All-dielectric round, single jacketFiberCount 2 to 72 fibers in color-coded buffer tubes

Options Track resistant (>4kV space potential)


MinimumBendRadius




Specifi cations

Optical Fibers


Strength YarnsRipcord

Jacket (PE)

Long Span Single Jacket

Outdoor Fiber


Loose Tube ADSS Self-Supporting Long Span Single Jacket


2to72

200 61 .44 11.3 70 103 .44 11.3 70 103 .44 11.3 70 103

300 91 .45 11.5 72 108 .44 11.3 70 103 .44 11.3 70 103

400 122 .47 11.8 75 112 .45 11.4 71 106 .44 11.3 70 103

500 152 - - - - .46 11.6 73 109 .45 11.4 71 105

600 183 - - - - .46 11.7 75 111 .45 11.5 72 107

700 213 - - - - .47 12.0 77 115 .46 11.6 73 109

800 244 - - - - - - - - .46 11.7 75 111

900 274 - - - - - - - - .47 11.9 76 113

1,000 305 - - - - - - - - .47 12.0 77 115



Outdoor Fiber


Loose Tube ADSS Self-Supporting Long Span Double JacketSingle Mode (ESMF, NZDSF), Multimode, Hybrid


Features & BenefitsEasy Cable Entry and Preparation• Ripcord speeds cable entry and outer jacket removal• Swellable binders speed cable preparation

Proven Long Span Installation and Use• Tailored designs span distances up to 2,500' without interrupting power• Higher count designs utilize 24 fibers per tube to reduce environmental load• Matching pole attachment hardware (dead-ends, suspension clamps)

Constructions All-dielectric round, double jacketFiberCount 2 to 288 fibers in color-coded buffer tubes

Options Track resistant (>4kV space potential)


MinimumBendRadius




Specifi cations

Optical Fibers

Buffer Tubes

Water Blocking (Swellable) Binders

Ripcord

Inner Jacket (some designs)

Jacket (PE)

Aramid Strength Yarns

Long Span Double Jacket

Outdoor Fiber



2to72

200 61 .53 13.4 97 144 .52 13.3 95 142 .52 13.3 95 142

400 122 .55 13.9 103 153 .53 13.5 98 146 .53 13.4 97 144

600 183 .57 14.4 109 162 .55 13.9 103 153 .54 13.6 99 148

800 244 .60 15.3 122 182 .56 14.2 106 158 .55 13.9 103 153

1,000 305 .64 16.2 135 201 .57 14.5 111 165 .56 14.1 106 157

1,200 366 .67 17.0 147 218 .60 15.3 122 182 .57 14.4 110 163

1,600 488 - - - - .65 16.5 140 208 .62 15.7 127 189

2,000 610 - - - - .69 17.6 157 234 .65 16.6 141 210

74to144

200 61 .57 14.6 114 169 .57 14.6 114 169 .57 14.6 114 169

400 122 .59 15.1 120 179 .58 14.8 116 172 .58 14.6 114 170

600 183 .61 15.5 127 188 .59 15.1 120 179 .59 14.9 117 175

800 244 .65 16.5 141 210 .60 15.4 124 184 .60 15.1 121 180

1,000 305 .68 17.3 154 229 .62 15.8 130 193 .60 15.4 124 184

1,200 366 .71 17.9 164 244 .65 16.5 141 210 .62 15.7 129 192

1,600 488 .77 19.6 192 286 .70 17.8 161 240 .67 16.9 147 219

2,000 610 - - - - .74 18.8 179 267 .71 17.9 164 244

146to216

200 61 .70 17.8 157 234 .70 17.8 156 233 .70 17.8 156 233

400 122 .72 18.3 165 245 .71 18.0 160 238 .70 17.9 159 236

600 183 .75 19.0 178 265 .72 18.3 166 247 .72 18.2 163 243

800 244 .77 19.6 189 281 .73 18.6 171 254 .73 18.4 168 250

1,000 305 .80 20.4 202 301 .76 19.3 182 272 .74 18.7 172 255

1,200 366 .83 21.0 215 319 .78 19.9 193 288 .76 19.4 184 274

1,600 488 - - - - .83 21.0 215 319 .80 20.4 202 301

2,000 610 - - - - .87 22.0 235 349 .84 21.3 220 327

218to288

200 61 .83 21.1 207 308 .83 21.0 205 305 .83 21.0 205 305

400 122 .85 21.5 216 321 .84 21.3 211 313 .83 21.2 209 311

600 183 .87 22.2 229 340 .85 21.6 218 324 .84 21.5 215 319

800 244 .90 22.9 244 363 .87 22.2 229 340 .86 21.7 220 327

1,000 305 .93 23.5 257 382 .89 22.6 238 354 .88 22.3 232 345

1,200 366 .95 24.2 272 404 .91 23.2 249 371 .90 22.8 242 360

1,600 488 - - - - .96 24.3 274 408 .94 23.8 264 393

2,000 610 - - - - - - - - .97 24.7 284 422

Loose Tube ADSS Self-Supporting Long Span Double Jacket




Outdoor Fiber


Dielectric Flat Drop

Optical Fibers

Central Buffer Tube (gel-filled)

Strength Members (dielectric)

Ripcord

Toning Wire (optional 24 AWG)

Water Blocking Strength Yarns

Toneable Flat Drop

Jacket (PE)

Loose Tube Dielectric and Toneable Flat DropSingle Mode, Multimode, Hybrid

ApplicationsMulti-purpose FTTx: aerial self-support, direct buried and duct.

Constructions Flat profile, dielectric and toneableFiberCount 1 to 12 fibers

Options Packaging: portable box/spool/bulk reel Preconnectorized: 1 or 2 ends

Performance ANSI/ICEA, IEC, RDUP, Telcordia GR-20 drop cableMaximum

InstallationLoad1-6 Fiber: 300 lbf (1,335N)7-12 Fiber: 600 lbf (2,670N)

MaximumOperationLoad

1-6 Fiber: 90 lbf (400N)7-12 Fiber: 180 lbf (800N)



Max.SpanwithNESCLoadingConditions

Heavy – 150' (46m)Medium – 210' (64m)Light – 305' (93m)

Dielectric



Toneable

Specifi cations

Features & BenefitsEasy Cable Entry and Preparation• Flat profile utilizes economical wedge clamps• Compatibility with existing installation hardware and methods• Ripcord speeds cable entry and jacket removal• Toning wire enables underground location (toneable option)

Flexible Routing and Termination• Flexible buffer tube simplifies routing and splicing• Preconnectorized option for plug and play connectivity

Multi-Purpose Installation and Use• Suitable for self-support aerial, duct and buried• Portable box and spool packaging simplify widespread deployment

Optical Fibers



Ripcord

Jacket (PE)


Outdoor Fiber


Loose Tube Dielectric Flat Drop

FiberCount inch mm inch mm inch mm lb/K-ft kg/km inch cm inch cm

1 to 6 .075 1.9 .31 8.0 .15 3.9 22 33 4.6 12 3.1 8

7 to 12 .118 3.0 .41 10.4 .20 5.0 34 51 6.0 15 4.1 10

BufferTube Width Height CableWeight

Loose Tube Toneable Flat Drop


1 to 6 .075 1.9 .42 10.7 .15 3.9 25 37 4.6 12 3.1 8

7 to 12 .118 3.0 .51 13.0 .20 5.0 38 56 6.0 15 4.0 10

BufferTube Width Height

BendRadius

CableWeight

BendRadius

Load NoLoad

Load NoLoad

Outdoor Fiber


Optical Fibers


Integrated Messenger

Ripcord

Jacket (PE)



Loose Tube Figure-8 Integrated Messenger DropSingle Mode, Multimode, Hybrid


Features & BenefitsEasy Cable Entry and Preparation• Compatible with existing Figure-8 installation and hardware methods• Tear-away messenger simplifies grounding• Ripcord speeds cable entry and jacket removal• Toneable messenger enables underground locating

Flexible Routing and Termination• Flexible buffer tube simplifies routing and splicing• Preconnectorized option for plug and play connectivity

Multi-Purpose Installation and Use• Suitable for self-support aerial, duct and buried• Portable box and spool packaging simplify widespread deployment

Constructions Integrated messenger, non-armoredFiberCount 2 to 6 fibers

Options Packaging: portable box/spool/bulk reel Preconnectorized: 1 or 2 ends


InstallationLoad 300 lbf (1,335N)





Max.InstallationTensionwithNESC

LoadingConditions

Heavy – 62 lbs. (275N)Medium – 109 lbs. (485N)Light – 169 lbs. (705N)

Specifi cations

Figure-8 Messenger Drop

Outdoor Fiber



2 to 6 .075 1.9 .16 4.1 .34 8.8 33 49 6 15 6 15

Loose Tube Figure-8 Integrated Messenger Drop

BufferTubeApproximateCableWeightDiameter Height

BendRadius

Load NoLoad

Outdoor Fiber


Dielectric Flat Ribbon Drop

Toneable Flat Ribbon Drop

Loose Tube Dielectric and Toneable Flat Ribbon DropSingle Mode, Multimode, Hybrid


Features & BenefitsEasy Cable Entry and Preparation• Flat profile design uses economical wedge clamps• Compatible with existing hardware and methods• Ripcord speeds cable entry and jacket removal• Optional toning wire enables underground locating

Multi-Purpose Installation and Use• Spool and bulk reel packaging simplify deployment

Constructions Flat profile, dielectric and toneableFiberCount 4 or 6 fibers (single ribbon)

Options Packaging: spool/bulk reelPreconnectorized: 1 or 2 ends


InstallationLoad 600 lbf (2,670N)






Dielectric



Toneable

Specifi cations

Optical Fibers



Ripcord

Jacket (PE)


Optical Fibers



Toning Wire (optional 24 AWG)

Jacket (PE)


Ripcord

Outdoor Fiber


Loose Tube Dielectric Flat Ribbon Drop


4 or 6 .118 3 .41 10.4 .20 5 34 51 6 15 4 10

BufferTube Width Height CableWeight

Loose Tube Toneable Flat Ribbon Drop

BufferTube WidthFiberCount inch mm inch mm inch mm lb/K-ft kg/km inch cm inch cm

4 or 6 .118 3 .51 13 .2 5 38 56 6 15 4 10

Height CableWeight

BendRadius

Load NoLoad

BendRadius

Load NoLoad

Outdoor Fiber

432-Fiber Armored Ribbon

Optical Fibers (24) Fiber Ribbons

Flexible Core Tube (gel filled)

Strength Yarns

Jacket (PE)

Water Blocking (swellable tape)

Ripcord

Corrugated Armor


Central Tube Dielectric and Armored RibbonSingle Mode (ESMF)

ApplicationsMulti-purpose outdoor: aerial lashed, duct, direct buried and high counts/high density/mass splicing.

Features & BenefitsEasy Cable Entry and Preparation• Adhesive bond armor greatly improves mid-entry• Ripcord speeds cable entry and jacket removal• Compatible with ribbon tools and methods

(heat stripping, mechanical peel and mass splicing)

Multi-Purpose Installation and Use• Spool and bulk reel packaging simplify deployment

Constructions Dielectric, armoredFiberCount 12 to 432 fibers in multi-fiber ribbons

Options Preconnectorized/standard tube designPerformance ANSI/ICEA, IEC, RDUP, Telcordia GR-20





Specifi cations

216-Fiber Dielectric Ribbon



Strength Yarns

Jacket (PE)


Ripcord

Strength Elements (dielectric)

Outdoor Fiber


FiberCount inch mm lb/K-ft kg/km inch cm inch cm

12 to 72 .55 13.9 97 144 11 28 6 14

84 to 144 .61 15.5 120 179 12 31 6 16

156 to 216 .69 17.5 163 243 14 35 7 18

240 to 432 .77 19.6 204 304 15 39 8 20

Central Tube Dielectric Ribbon




12 to 72 .57 14.4 138 205 12 29 9 22

84 to 144 .62 15.6 174 260 13 31 9 23

156 to 216 .72 18.2 222 330 15 36 11 27

240 to 432 .86 21.8 292 434 17 44 13 33

Central Tube Armored Ribbon



Outdoor Fiber


Dielectric Ribbon

Armored Ribbon

Central Tube High Count Ribbon Dielectric and ArmoredSingle Mode (ESMF)

ApplicationsMulti-purpose outdoor: aerial lashed, duct, direct buried and high counts/high density/mass splicing.

Features & BenefitsEasy Cable Entry and Preparation• Adhesive bond armor greatly improves mid-entry• Ripcord speeds cable entry and jacket removal• Compatible with ribbon tools and methods (heat stripping, mechanical

peel and mass splicing)

Simplified Fiber Management and Access• Color-coded buffer tubes segregate ribbon groups• Easy to access individual tubes, ribbons and fibers

Constructions Dielectric, armoredFiberCount 288 to 864 in 12-fiber ribbons

Options Preconnectorized/central tube designPerformance ANSI/ICEA, IEC, RDUP, Telcordia GR-20





Specifi cations

Optical Fibers

Binders

Flexible Stranded Tubes (gel filled)

Strength Yarns

Jacket (PE)

Water Blocking Tape

Ripcord

Optical Fibers

Binders

Flexible Stranded Tubes (gel filled)

Strength Yarns

Jacket (PE)

Water Blocking Tape

Ripcord


Outdoor Fiber



288 to 432 .88 22.4 237 343 18 45 9 22

576 to 864 1.04 26.4 322 479 21 53 11 27

Central Tube Dielectric High Count Ribbon




288 to 432 .94 23.9 317 472 19 48 14 36

576 to 864 1.16 29.5 430 640 23 58 17 44

Central Tube Armored High Count Ribbon



Outdoor Fiber


Central Tube Gel-Free* Ribbon Dielectric and ArmoredSingle Mode (ESMF)

ApplicationsMulti-purpose outdoor: aerial lashed, duct and direct buried.

Features & BenefitsEasy Cable Entry and Preparation• Gel-free design simplifies access and reduces prep time• Adhesive bond armor greatly improves mid-entry• Ripcord speeds cable entry and jacket removal• Compatible with ribbon equipment and procedures

(heat strip and mass splicing)

Multi-Purpose Installation and Use• Suitable for aerial lashed, duct and buried• Optional corrugated steel tape armor provides mechanical protection


Constructions Dielectric, armoredFiberCount 12 to 432 fibers in multi-fiber ribbons

Options PreconnectorizedPerformance ANSI/ICEA, IEC, RDUP, Telcordia GR-20





Specifi cations

*Power&Teldefines”gelfree“fiberopticcablesascableswithnowaterblockinggelbetweenorinthebuffertubes.Cableswithnowaterblockinggelbetweenthebuffertubesonlyaredescribedasdry.

432-Fiber Armored Ribbon



Strength Yarns

Jacket (PE)


Ripcord

Corrugated Armor

216-Fiber Dielectric Ribbon



Strength Yarns

Jacket (PE)


Ripcord

Strength Elements (dielectric)

Outdoor Fiber



12 to 48 .55 14.0 82 122 11 28 6 14

60 to 144 .66 16.8 118 176 13 34 7 17

156 to 216 .76 19.3 147 219 15 39 8 19

240 to 432 .79 20.1 154 230 16 40 8 20

Central Tube Dielectric Gel-Free Ribbon




12 to 48 .57 14.4 124 184 12 29 9 22

60 to 144 .67 16.9 153 228 13 34 10 25

156 to 216 .77 19.5 191 284 15 39 12 29

240 to 432 .85 21.6 218 325 17 43 9 22

Central Tube Armored Gel-Free Ribbon



Outdoor Fiber

Color-Coded Binders

Optical Fibers (12 fiber bundles)

Central Core Tube (gel-filled)

Strength Elements (steel)


Ripcords (armored)

Jacket (PE)


Armored MicroUnitube

Central Tube Dielectric and Armored MicroUnitubeSingle Mode (ESMF), Multimode, Hybrid

ApplicationsMulti-purpose outdoor: aerial lashed, duct and direct buried.

Features & BenefitsEasy Cable Entry and Preparation• Adhesive bond armor greatly improves mid-entry• Ripcord speeds cable entry and outer jacket removal• Single core tube allows quick access to fibers

Multi-Purpose Installation and Use• Small diameter and light weight extend reel and installation lengths• Corrugated steel tape armor provides mechanical protection and rodent

resistance (armored version)

Constructions Dielectric, armored

FiberCount 2 to 24 fibers in fiber bundles separated by color-coded binder threads

Options PreconnectorizedPerformance ANSI/ICEA, IEC, RDUP, Telcordia GR-20

MaximumInstallationLoad

600 lbf (2,670N) - Armored300 lbf (1,335N) - Dielectric


180 lbf (800N) - Armored90 lbf (400N) - Dielectric



Specifi cations

Outdoor Fiber



2 to 12 .35 8.8 40 60 7 18 4 9

Central Tube Dielectric MicroUnitube


BendRadius

CableWeight


2 to 24 .41 10.3 77 114 8 21 6 15

Central Tube Armored MicroUnitube


BendRadius

CableWeight

Outdoor Fiber


Tight Buffer Distribution Riser and PlenumSingle Mode (ESMF), Multimode (50µm, 62.5µm), Hybrid

ApplicationsSuitable for both indoor and outdoor use, ideal for interbuilding and transition applications.

Features & BenefitsEasy Cable Installation and Termination• 900µm tight buffered fibers can be directly terminated• Flexible small diameter cables simplify pulling and placement• Color-coded fibers and numbered sub-units simplify identification• Optional interlock armor provides robust protection and one-step installation

Flame-Retardant Safety• Versions for riser (OFNR/FT-4), plenum (OFNP/FT-6) and LSZH• A single cable design can support all structured cabling applications

*Pull Strength

Constructions 900µm tight buffered color-coded fibers - dielectric and interlock armor

FiberCount 2 to 144 fibers (cables > 12 fibers are unitized)

Options Indoor, LSZH and specialty versions (mining, remote broadcast; tactical deployment; preconnectorized)

Performance TIA/EIA-568B, ICEA 83-596, Telcordia GR-409, IEEE383

*Max.InstallationLoad(Riser)

2-12 Fiber: 300 lbs. (1,335N)18-144 Fiber: 600 lbs. (2,700N)

Max.OperationLoad(Riser)

2-12 Fiber: 90 lbs. (400.5N)18-144 Fiber: 180 lbs. (810N)

*Max.InstallationLoad(Plenum)

2-12 Fiber: 150 lbs. (666N)18-60 Fiber: 400 lbs. (1,800N)72-144 Fiber: 600 lbs. (4,445N)

Max.OperationLoad(Plenum)

2-12 Fiber: 45 lbs. (199.8N)18-60 Fiber: 120 lbs. (540N)72-144 Fiber: 180 lbs. (810N)

ShippingandStorage -40°F to 176°F (-40°C to 80°C)Installation 32°F to 122°F (0°C to 50°C)


Specifi cations

6-Fiber Cable

Optical Fibers

Color-Coded Tight Buffer Coating (900µm)


Flame-Rated Jacket

36-Fiber Cable


Optical Fibers

Flame-Rated Jacket


6 fiber sub-unit (18 - 36 fibers) or12 fiber sub-unit (> 36 - 144 fibers)


Indoor/Outdoor Fiber


Load NoLoadFiberCount FibersperUnit inch mm lb/K-ft kg/km inch cm inch cm

2 2 .18 4.5 9 13 4 9 2 5

4 4 .18 4.6 14 21 4 9 2 5

6 6 .19 5.0 15 22 4 10 2 5

8 8 .21 5.2 18 27 4 10 2 5

12 12 .24 6.1 22 33 5 12 2 6

18 6 .44 11.2 86 128 9 22 4 11

24 6 .44 11.2 78 117 9 22 4 11

36 6 .55 13.8 131 196 11 28 5 14

48 12 .56 14.3 140 209 11 29 6 14

60 12 .63 16.0 172 257 13 32 6 16

72 12 .69 17.5 209 312 14 35 7 18

96 12 .84 21.3 345 514 17 43 8 21

144 12 .98 24.9 433 646 20 50 10 24

Diameter CableWeight

BendRadius


2 2 .19 4.8 15 22 4 10 2 5

4 4 .22 5.6 19 28 4 11 2 6

6 6 .24 6.0 21 31 5 12 2 6

8 8 .24 7.0 23 34 5 12 2 6

12 12 .28 14.2 30 45 6 18 3 7

18 6 .56 14.2 94 140 11 28 6 14

24 6 .56 16.8 94 140 11 33 6 17

36 6 .66 16.8 99 148 13 33 7 17

48 12 .66 16.8 134 200 13 33 7 17

60 12 .74 18.8 168 250 15 38 7 19

72 12 .80 20.3 198 295 16 41 8 20

84 12 .85 21.7 231 345 17 43 9 22

96 12 .95 24.2 287 428 19 48 10 24

108 12 1.02 25.9 341 508 20 52 10 26

120 12 1.02 25.9 341 508 20 52 10 26

132 12 1.02 25.9 341 508 20 52 10 26

144 12 1.02 25.9 341 508 20 52 10 26


BendRadius

Tight Buffer Distribution Riser (OFNR, FT-4 Rated)

Tight Buffer Distribution Plenum (OFNP, FT-6 Rated)



Dielectric Single Jacket

Armored Double Jacket

Optical Fibers

Flexible Buffer Tubes


Ripcord


Flame-Rated Inner Jacket

Flame-Rated Jacket

Loose Tube Riser Dielectric Single, Double Jacket Armored Double JacketSingle Mode (ESMF), Multimode (50µm, 62.5µm), Hybrid

ApplicationsSuitable for a combination of indoor flame-rated spaces and outdoor aerial lashed, duct and direct buried environments. By enabling placement virtu-ally anywhere in a network, installers can bypass traditional transition points required in many installations and go directly from outside plant to riser shaft.

Optical Fibers



Strength Yarns

Flame-Rated Jacket

Ripcord

Features & BenefitsEasy Cable Installation and Termination• Easy installation without the need for a transition point• Ripcord speeds cable entry and outer jacket removal• Strength yarns bend in any direction without memory

Multi-Purpose Installation and Use• Optional corrugated steel tape armor provides mechanical protection


Constructions Dielectric (single and double jacket), armored, interlock armor

FiberCount 2 to 288 fibers in color-coded buffer tubes

Options Preconnectorized and specialty designs (MSHA mining)

PerformanceTIA/EIA-568B, ANSI/ICEA S-87-640, Telcordia GR-20, Telcordia GR-409, ANSI/ICEA S-104-696-2003



ShippingandStorage -40°F to 176°F (-40°C to 80°C)Installation 14°F to 176°F (-10°C to 80°C)


Specifi cations



Load NoLoadFiberCount (outer/inner) orNo.ofUnits inch mm lb/K-ft kg/km inch cm inch cm

2 to 36 6 6 .37 9.4 61 91 7 19 4 9

38 to 72 6 12 .44 11.2 79 119 9 22 4 11

74 to 84 7 12 .47 11.9 90 135 9 24 5 12

86 to 96 8 12 .51 13.0 102 153 10 26 5 13

98 to 108 9 12 .54 13.7 116 174 11 27 6 14

110 to 120 10 12 .58 14.7 132 198 11 29 6 15

122 to 132 11 12 .62 15.7 153 229 12 31 6 16

134 to 216 12/6 12 .69 17.5 196 294 14 35 7 18

218 to 264 14/8 12 .76 19.3 244 366 15 39 7 19

266 to 288 15/9 12 .80 20.3 269 404 16 41 8 20


BendRadius

Loose Tube Riser Dielectric Single Jacket (OFNR)

No.ofBufferTubes FibersperUnit


2 to 36 6 6 .49 12.4 112 167 10 24.8 5 13

38 to 72 6 12 .56 14.2 137 204 11 28.4 6 15

74 to 84 7 12 .59 14.9 157 234 12 29.8 6 15

86 to 96 8 12 .62 15.7 172 257 12 31.4 6 16

98 to 108 9 12 .66 16.6 190 283 13 33.2 7 17

110 to 120 10 12 .70 17.7 223 333 14 35.4 7 18

122 to 132 11 12 .77 19.4 250 373 15 38.8 8 20

134 to 216 12/6 12 .86 21.6 302 450 17 43.2 9 22

218 to 264 14/8 12 .93 23.4 337 502 18 46.8 9 24

266 to 288 15/9 12 .96 24.3 353 526 19 48.6 10 25


BendRadius

Loose Tube Riser Dielectric Double Jacket (OFNR)



2 to 36 6 6 .56 14.2 173 260 11 28 9 22

38 to 72 6 12 .63 16.0 201 301 13 32 9 24

74 to 84 7 12 .66 16.8 218 327 13 34 10 26

86 to 96 8 12 .70 17.8 238 357 14 36 11 27

98 to 108 9 12 .73 18.5 258 387 15 37 11 28

110 to 120 10 12 .77 19.6 286 429 15 39 12 30

122 to 132 11 12 .81 20.6 307 460 16 41 12 31

134 to 216 12/6 12 .93 23.5 346 519 19 47 14 36

218 to 264 14/8 12 1.00 25.3 391 586 20 51 15 38

266 to 288 15/9 12 1.04 26.3 417 625 21 53 16 40


BendRadius

Loose Tube Riser Armored Double Jacket (OCNR)




Loose Tube LSZHSingle, Double Jacket Dielectric Double Jacket ArmoredSingle Mode (ESMF), Multimode (50µm, 62.5µm), Hybrid

ApplicationsSuitable for a combination of indoor flame-rated spaces and outdoor aerial lashed, duct and direct buried environments. By enabling placement virtu-ally anywhere in a network, installers can bypass traditional transition points required in many installations and go directly from outside plant to riser shaft.

Optical Fibers



Flame-Rated Jacket

Ripcord

Features & BenefitsEasy Cable Installation and Termination• Easy installation without the need for a transition point• Ripcord speeds cable entry and outer jacket removal• Strength yarns bend in any direction without memory

Multi-Purpose Installation and Use• Optional corrugated steel tape armor provides mechanical protection



FiberCount 2 to 216 fibers in color-coded buffer tubes

Options Preconnectorized and specialty designs (MSHA mining)

PerformanceTIA/EIA-568B, ANSI/ICEA S-87-640, Telcordia GR-20, Telcordia GR-409, ANSI/ICEA S-104-696-2003





Specifi cationsDielectric Single Jacket

Armored Double Jacket Riser

Optical Fibers



Ripcord


Flame-Rated Inner Jacket

Flame-Rated Jacket

Strength Yarns



FiberCount (outer/inner) orNo.ofUnits inch mm lb/K-ft kg/km inch cm inch cm

2 to 36 6 6 .37 9.4 61 91 7 19 4 9

38 to 72 6 12 .44 11.2 79 119 9 22 4 11

74 to 84 7 12 .47 11.9 90 135 9 24 5 12

86 to 96 8 12 .51 13.0 102 153 10 26 5 13

98 to 108 9 12 .54 13.7 116 174 11 27 6 14

110 to 120 10 12 .58 14.7 132 198 11 29 6 15

122 to 132 11 12 .62 15.7 153 229 12 31 6 16

134 to 216 12/6 12 .69 17.5 196 294 14 35 7 18

BendRadius

LSZH Dielectric Single Jacket (OFNR, Low-Smoke)

CableWeight


2 to 36 6 6 .49 12.4 112 167 10 24.8 5 13

38 to 72 6 12 .56 14.2 137 204 11 28.4 6 15

74 to 84 7 12 .59 14.9 157 234 12 29.8 6 15

86 to 96 8 12 .62 15.7 172 257 12 31.4 6 16

98 to 108 9 12 .66 16.6 190 283 13 33.2 7 17

110 to 120 10 12 .70 17.7 223 333 14 35.4 7 18

122 to 132 11 12 .77 19.4 250 373 15 38.8 8 20

134 to 216 12/6 12 .86 21.6 302 450 17 43.2 9 22


BendRadius

LSZH Dielectric Double Jacket (OFNR, Low-Smoke)


NoLoadDiameterNo.ofBuffer

Tubes FibersperUnit Load


2 to 36 6 6 .56 14.2 173 260 11 28 9 22

38 to 72 6 12 .63 16.0 201 301 13 32 9 24

74 to 84 7 12 .66 16.8 218 327 13 34 10 26

86 to 96 8 12 .70 17.8 238 357 14 36 11 37

98 to 108 9 12 .73 18.5 258 387 15 37 11 28

110 to 120 10 12 .77 19.6 286 429 15 39 12 30

122 to 132 11 12 .81 20.6 307 460 16 41 12 31

134 to 216 12/6 12 .93 23.5 346 519 19 47 14 36


BendRadius

LSZH Armored Double Jacket (OFCR, Low-Smoke)




Loose Tube Single Jacket, Gel-Free* Riser and PlenumSingle Mode (ESMF), Multimode (50µm, 62.5µm), Hybrid

ApplicationsSuitable for a combination of indoor spaces and outdoor aerial lashed, duct and direct buried environments. By enabling placement virtually anywhere in a network, installers can bypass traditional transition points required in many installations and go directly from outside plant to riser shaft.

Optical Fibers

Gel-Free Flexible Buffer Tubes


Flame-Rated Jacket

Ripcord

Features & BenefitsEasy Cable Installation and Termination• Gel-free design simplifies access and reduces prep time• Ripcord speeds cable entry and outer jacket removal• Strength yarns bend in any direction without memory

Multi-Purpose Installation and Use• Available with standard, 1G and 10G Ethernet multimode fibers• Interlock armor available


FiberCount 6 to 288 fibers (depending on cable type)Options Preconnectorized, interlock armor and specialty designs

Performance TIA/EIA-568B, ICEA 83-596, Telcordia GR-20, Telcordia GR-409, ANSI/ICEA S-104-696-2003


300 lbf (1,335N) – one buffer tube 600 lbf (2,700N) – more than one buffer tube


90 lbf (400N) – one buffer tube200 lbf (890N) – more than one buffer tube



Specifi cations

Strength Yarns

*Power&Teldefines”gelfree“fiberopticcablesascableswithnowaterblockinggelbetweenorinthebuffertubes.Cableswithnowaterblockinggelbetweenthebuffertubesonlyaredescribedasdry.

Single Jacket




6 to 60 5 6/12 .42 10.6 68 101 8 21 4 11

72 6 12 .45 11.4 80 120 9 23 5 11

84 7 12 .49 12.3 94 140 10 25 5 12

96 8 12 .53 13.4 111 165 11 27 5 13

108 9 12 .56 14.2 124 185 11 28 6 14

120 10 12 .60 15.1 141 211 12 30 6 15

132 11 12 .63 16.0 165 246 13 32 6 16

144 12 12 .66 16.9 183 273 13 34 7 17

156 to 216 12/6 12 .71 18.0 190 238 15 37 7 19

218 to 288 15/9 12 .82 20.8 254 378 16 42 8 20


BendRadius

Loose Tube Riser Gel-Free Single Jacket (OFNR)


Loose Tube Plenum Gel-Free Single Jacket (OFNP)


6 to 60 5 6/12 .37 9.3 55 82 7 19 4 9

72 6 12 .40 10.2 66 99 8 20 4 10

84 7 12 .44 11.1 76 119 9 22 4 11

96 8 12 .48 12.2 98 145 10 24 5 12

98 to 144 12 12 .61 15.6 138 206 12 30 6 14


BendRadiusNo.ofBuffer

Tubes FibersperUnit



Loose TubeHarsh Environment, Chemical Resistant, Single/Double and Armored Double JacketsSingle Mode, Multimode (50µm, 62.5µm), Hybrid

ApplicationsHeavy duty protection from harsh chemicals and solvents. Inter and intrabuilding process control, SCADA, chemical plants and airports.

Features & BenefitsRobust Chemical Resistance and Protection• Chemical- and petroleum-resistant outer jacket• Versatile loose tube design and armored option• Optional 1,000 lb. (4,444N) tensile strength for

dielectric/double jacket (DXPCC)

Harsh Environment/Flame Retardant Performance• Meets OFN, OFC (tray) – UL 1581 and IEEE383• A single cable design can support all harsh environment

structured cabling applications• Chemical-resistant jacket

Constructions Dielectric (single and double jacket), armored (double jacket)

FiberCount 2 to 216 fibers

Options Preconnectorized, interlock armor and specialty designs

Performance Telcordia GR-20, Telcordia GR-409, ANSI/ICEA S-104-696-2003


600 lbf (2,700N) 1,000 lbf (4,545N) – DXPCC only




Specifi cations

Optical Fibers




Ripcord

Inner Jacket

Chemical-Resistant Outer Jacket

Armored Double Jacket

Optical Fibers



Chemical-Resistant Jacket

Ripcord

Strength Yarns

Dielectric Single Jacket

Dielectric Double Jacket

Optical Fibers



Chemical-Resistant Outer Jacket

Ripcord

Strength Yarns

Inner Jacket



Loose Tube Harsh Environment Dielectric Double Jacket (OFN-tray)


2 to 60 5 12 .53 13.5 108 162 11 27 6 14

62 to 72 6 12 .56 14.2 125 188 11 28 6 14

74 to 84 7 12 .59 15.0 139 209 12 30 6 15

86 to 96 8 12 .62 15.7 156 234 12 31 6 16

98 to 108 9 12 .66 16.8 179 269 13 34 7 17

110 to 120 10 12 .70 17.8 199 299 14 36 7 18

122 to 132 11 12 .73 18.5 221 331 15 37 7 19

134 to 216 12/6 12 .76 19.3 240 360 15 39 7 19



Tubes FibersperUnit


2 to 60 5 12 .41 10.4 62 93 8 21 4 10

62 to 72 6 12 .44 11.2 73 109 9 22 4 11

74 to 84 7 12 .47 11.9 82 123 9 24 5 12

86 to 96 8 12 .51 13.0 95 142 10 26 5 13

98 to 108 9 12 .55 14.0 110 165 11 28 6 14

110 to 120 10 12 .58 14.7 124 186 11 29 6 15

122 to 132 11 12 .62 15.7 139 209 12 31 6 16

134 to 216 12/6 12 .65 16.5 153 229 13 33 6 17


BendRadius

Loose Tube Harsh Environment Dielectric Single Jacket (OFN-tray)


Loose Tube Harsh Environment Armored Double Jacket (OFC-tray)


2 to 60 5 12 .60 15.2 167 251 12 30 9 23

62 to 72 6 12 .64 16.3 183 274 13 33 9 24

74 to 84 7 12 .66 16.8 191 286 13 34 10 25

86 to 96 8 12 .70 17.8 209 313 14 36 11 27

98 to 108 9 12 .74 18.8 228 342 15 38 11 28

110 to 120 10 12 .78 19.8 249 373 16 40 12 30

122 to 132 11 12 .81 20.6 266 399 16 41 12 31

134 to 216 12/6 12 .84 21.3 284 426 17 43 13 32



Tubes FibersperUnit



Tight Buffer Distribution Riser and PlenumSingle Mode (ESMF), Multimode (50µm, 62.5µm), Hybrid

ApplicationsVersatile indoor tight buffered cable.

Optical Fibers



Flame-Rated Jacket


Flame-Retardant Safety• Versions for riser (OFNR/FT-4), plenum (OFNP/FT-6) and LSZH• Optional indoor/outdoor and specialty versions for applications beyond the office• UL 1666/CSA FT-4 riser• NFPA-262/UL910/CSA FT-6 plenum

Constructions 900µm tight buffered color-coded fiber - dielectric and interlock armor

FiberCount 2 to 144 fibers (6- and 12-fiber sub units)

Options Indoor/outdoor and specialty versions (interlock armor, tactical deployment and preconnectorized)

Performance TIA/EIA-568B, ANSI, ICEA 83-596, Telcordia GR-409, RoHS


2-12 Fiber: 150 lbs. (660N)18-144 Fiber: 300 lbs. (1,320N)


2-12 Fiber: 45 lbs. (220N)18-144 Fiber: 100 lbs. (444N)





VerticalRise Riser: 500' (112m)Plenum: 500' (152m)



Specifi cations

*Pull Strength

Distribution

Indoor Fiber


Load NoLoadFiberCount orNo.ofUnits inch mm lb/K-ft kg/km inch cm inch cm

2 - .19 4.8 15 22 4 10 3 7

4 - .22 5.6 19 28 4 11 3 8

6 - .24 6.0 21 31 5 12 4 9

8 - .25 6.2 23 34 5 12 4 9

12 6 .28 7.0 30 45 6 14 4 11

18 6 .52 13.3 90 134 11 27 8 20

24 6 .52 13.3 90 134 11 27 8 20

36 12 .63 15.9 143 213 12 32 9 24

48 12 .63 15.9 125 187 13 32 9 24

60 12 .70 17.8 154 230 14 36 11 28

72 12 .77 19.5 189 282 15 39 12 29

96 12 1.02 26.0 274 408 21 52 15 39

144 12 1.02 26.0 323 481 21 52 15 39


BendRadius

Tight Buffer Distribution Riser (OFNR, FT-4)


2 - .17 4.2 9 13 3 8.4 3 6

4 - .17 4.3 14 21 3 8.6 3 7

6 - .19 4.7 15 22 4 9.4 3 7

8 - .20 5.0 18 27 4 9.9 3 7

12 - .28 7.0 30 45 5 11.7 4 9

18 6 .41 10.3 72 108 8 21 6 16

24 6 .41 10.3 72 108 8 21 6 16

36 6 .51 12.9 115 171 10 26 8 19

48 12 .53 13.3 123 183 11 27 8 20

60 12 .59 15.0 153 228 12 30 9 23

72 12 .65 16.6 188 280 13 33 10 25

96 12 .80 20.4 316 471 16 41 12 31

144 12 .90 23.0 402 599 18 46 13 35


BendRadius

Tight Buffer Distribution Plenum (OFNP, FT-6)

FibersperUnit

Indoor Fiber


Tight Buffer LSZH DistributionSingle Mode (ESMF), Multimode (50µm, 62.5µm), Hybrid


Optical Fibers



Flame-Rated Jacket



Constructions 900µm tight buffered color-coded fiber - dielectric and interlock armor

FiberCount 2 to 144 fibers (6- and 12-fiber sub units)


Performance TIA/EIA-568B, ANSI/ICEA 83-596, Telcordia GR-409, RoHS

*MaximumInstallationLoad




VerticalRise 500' (152m)ShippingandStorage -40°F to 176°F (-40°C to 80°C)

Installation 14°F to 122°F (-10°C to 50°C)Operation -4°F to 176°F (-20°C to 80°C)

Specifi cations

*Pull Strength

LSZH Distribution

Indoor Fiber


Load NoLoadFiberCount orNo.ofUnits inch mm lb/K-ft kg/km inch cm inch cm

2 - .22 5.6 15 22 4 11 3 8

4 - .22 5.7 21 31 5 11 3 9

6 - .24 6.1 22 32 5 12 4 9

8 - .25 6.3 24 36 5 13 4 10

12 - .28 7.1 31 46 6 14 4 11

18 6 .52 13.3 97 145 11 27 8 20

24 6 .52 13.3 97 145 11 27 8 20

36 6 .63 15.9 148 220 13 32 9 24

48 12 .63 15.9 130 194 13 32 9 24

60 12 .70 17.8 161 240 14 36 11 27

72 12 .77 19.5 198 295 15 39 12 29

96 12 1.02 25.8 304 453 20 52 15 39

144 12 1.02 25.8 304 453 20 52 15 39


BendRadius

Tight Buffer LSZH Distribution (OFNR, FT-4)

FibersperUnit

Indoor Fiber


Optical Fibers


Tight Buffered Fiber (900µm)

Flame-Rated Jacket (outer)


Ripcord

Tight Buffer Breakout Riser and PlenumSingle Mode (ESMF), Multimode (50µm, 62.5µm), Hybrid

ApplicationsRobust multi-fiber indoor breakout, routing and connectorization.

Features & BenefitsEasy Cable Entry and Termination• 2.5mm units with 900µm tight buffered fibers provide

simple direct field termination• Flexible robust cables simplify pulling and placement• Numbered sub-units simplify identification and routing• Optional interlock armor provides robust protection and one-step installation

Flame-Retardant Safety• Versions for riser (OFNR/FT-4), plenum (OFNP/FT-6) and LSZH• A single cable design can support all structured cabling applications

*Pull Strength

Constructions Jacketed cordage (2.5mm units) with 900µm tight buffered fiber; dielectric and interlock armor

FiberCount 2 to 24 fiberOptions Preconnectorized; 2.5mm units

Performance TIA/EIA-568B, ANSI/ICEA S-83-596, Telcordia GR-409, RoHS


2-12 Fiber: 150 lbf (660N)14-24 Fiber: 300 lbf (1,335N)






2 Fiber: 113 lbf (500N)4-8 Fiber: 250 lbf (110N)10-12 Fiber: 270 lbf (1,200N)14-24 Fiber: 45 lbf (200N)



Specifi cations

Breakout

Indoor Fiber



2 .29 7.3 33 49 6 15 4 11

4 .33 8.3 41 60 7 17 5 13

6 .38 9.6 57 85 8 20 6 15

8 .44 11.3 78 116 9 23 7 17

10 .53 13.4 108 161 11 27 8 21

12 .53 13.4 108 161 11 27 8 21

14 .53 13.4 108 161 11 27 8 21

16 .58 14.7 125 186 12 30 9 23

18 .58 14.7 125 186 12 30 9 23

24 .68 17.3 166 247 14 35 10 26


2 .23 5.8 25 36 5 12 4 9

4 .28 7.0 31 45 6 14 4 11

6 .33 8.5 44 65 7 17 5 13

8 .39 10.0 66 97 8 20 6 15

10 .46 11.6 93 138 9 24 7 18

12 .52 13.3 125 186 11 27 8 20

14 .50 12.8 96 143 10 26 8 20

16 .56 14.1 114 169 11 29 9 22

18 .56 14.1 112 166 11 29 9 22

24 .65 16.5 158 235 13 33 10 25

Tight Buffer Breakout Plenum (OFNP, FT-6)



Tight Buffer Breakout Riser (OFNR, FT-4)



Indoor Fiber


Tight Buffer LSZH BreakoutSingle Mode (ESMF), Multimode (50µm, 62.5µm), Hybrid


6-Fiber Cable

Optical Fibers



Flame-Rated Jacket



Constructions 900µm tight buffered color-coded fibers - dielectric and interlock armor

FiberCount 2 to 144 fibers (6 and 12 fiber sub units)



*MaximumInstallationLoad






Specifi cations

*Pull Strength

Indoor Fiber



2 .29 7.4 33 48 6 15 2 6

4 .33 8.4 39 57 7 17 3 7

6 .38 9.7 56 83 8 20 3 8

8 .45 11.4 82 122 9 23 4 9

10 .50 12.8 107 159 10 26 4 10

12 .57 14.5 138 205 11 29 4 11

14 .58 14.7 133 198 12 30 5 12

16 .58 14.7 133 198 12 30 5 12

18 .58 14.7 133 198 12 30 5 12

24 .68 17.2 180 268 14 35 5 13

Tight Buffer LSZH Breakout (OFN, FT-4)


BendRadius

CableWeight

Indoor Fiber


1-Fiber Simplex

Optical Fiber



Flame-Rated Jacket

Tight Buffer Simplex and Duplex Riser, Plenum and LSZHSingle Mode (ESMF), Multimode (50µm, 62.5µm)

ApplicationsSimple fiber patching, routing and connectorization, Simplex and Duplex interconnect.

2-Fiber Zipcord

Constructions 1 fiber Simplex, 2 fiber zipcord, 1 fiber round, 900µm tight buffered fiber

FiberCount 1 or 2 fiber

OptionsCordage diameter (1.6mm, 2mm and 2.9mm), preconnectorized assemblies (SC, LC, FC and others), fiber type



1 Fiber, Type 516: 33 lbs. (150N)1 Fiber, Types 520 and 529: 50 lbs. (220N)2 Fiber, Type 516Z: 33 lbs. (150N)2 Fiber, Types 520Z, 529Z and 529R: 50 lbs. (220N)


1 Fiber, Type 516: 10 lbs. (45N)1 Fiber, Types 520 and 529: 15 lbs. (66N)2 Fiber, Type 516Z: 10 lbs. (45N)2 Fiber, Types 520Z, 529Z and 529R: 15 lbs. (66N)


1 Fiber, Type 816: 33 lbs. (150N)1 Fiber, Types 820 and 829: 50 lbs. (220N)2 Fiber, Type 816Z: 33 lbs. (150N)2 Fiber, Types 820Z and 829Z: 50 lbs. (220N)


1 Fiber, Type 816: 10 lbs. (45N)1 Fiber, Types 820 and 829: 15 lbs. (66N)2 Fiber, Type 816Z: 10 lbs. (45N)2 Fiber, Types 820Z and 829Z: 15 lbs. (66N)

*Max.InstallationLoad(LSZH)

1 Fiber, Type LSZH16: 33 lbs. (150N) 1 Fiber, Type LSZH20 and LSZH29: 50 lbs. (220N)2 Fiber, Type LSZH16Z: 33 lbs. (150N)2 Fiber, Type LSZH20Z, LSZH29Z and LSZH29V: 50 lbs. (200N)

ShippingandStorage -40°F to 176°F (-40°C to 80°C)Installation 32°F to 122°F (0°C to 50°C)


Specifi cations

*Pull Strength

Optical Fiber



Flame-Rated Jacket

Indoor Fiber



1 .063 1.6 2 3.0 1 3 1 2

1 .079 2.0 2 4.0 4 2 1 3

1 .114 2.9 5 7.0 2 6 2 4

2 (Zipcord) .063 x .143 1.6 x 3.6 4 6.0 1 3 1 2

2 (Zipcord) .079 x .173 2.0 x 4.4 5 8.0 2 4 1 3

2 (Zipcord) .114 x .237 2.9 x 6.0 9 14.0 2 6 2 4

2 (Duplex, round) .113 2.9 5 6.4 2 6 2 4

Load NoLoadDiameter CableWeight

BendRadius

Tight Buffer Riser (OFNR, FT-4)

Tight Buffer Plenum (OFNP, FT-6)


1 .063 1.6 2 3 1 3 1 2

1 .079 2.0 3 4 2 4 1 3

1 .114 2.9 4 6 2 6 2 6

2 (Zipcord) .063 x .143 1.6 x 3.6 4 6 1 3 1 2

2 (Zipcord) .079 x .173 2.0 x 4.4 6 8 2 4 1 3

2 (Zipcord) .114 x .237 2.9 x 6.0 11 16 2 6 2 4


BendRadius

Features & BenefitsEasy Cable Installation and Termination• 900µm tight buffered fibers can be directly terminated

with strain relief• Flexible design• Easily strippable fiber coatings• Zipcord cable can be easily separated

into two Simplex units

Tight Buffer LSZH (OFNR, FT-6)


1 .063 1.6 3 3 1 3 1 2

1 .079 2.0 4 4 2 4 1 3

1 .114 2.9 8 8 2 6 2 4

2 (Zipcord) .063 x .143 1.6 x 3.6 4 5 1 3 1 2

2 (Zipcord) .079 x .173 2.0 x 4.4 5 8 2 4 1 3

2 (Zipcord) .114 x .237 2.9 x 6.0 10 15 2 6 2 4

2 (Duplex, oval) .203 x .316 5.2 x 8.0 32 47 4 10 3 8


BendRadius

Flame-Retardant Safety• UL 1666/CSA FT-4 OFNR riser option• NFPA-262/UL910/CSA FT-6 OFNR

plenum option

Indoor Fiber


Constructions Interlock armorFiberCount 2 to 144 fibers

Options Flame-retardant ratings/bare, stripe or jacket/Aluminum or steel armor



300 lbf (1,335N)≤ 12f: 150 lbf (660N)


100 lbf (444N)≥ 12f: 45 lbf (198N)



Specifi cations

Features & BenefitsEasy Cable Entry and Preparation• Easy cable installation• Designed for loose tube or tight buffered designs

for optimal fiber performance• Color-coded for easy identification

Flame-Retardant Safety• Versions for riser (OFNR/FT-4), Plenum (OFNP/FT-6) and LSZH


Optical Fibers


6 Fiber Sub-Unit (18-36 fibers) 12 Fiber Sub-Unit (36-144 fibers)

Flame-Rated Jacket (unit)

Ripcord

Interlock Armor


Interlock Armor

Interlock Armor Loose Tube


Optical Fibers


Flame-Rated Jacket (unit)

Interlock Armor

Outer Jacket (optional)

Ripcord

Ripcord

Loose Tube Interlock Armor, Riser and PlenumSingle Mode, Multimode, Hybrid

ApplicationsIndoor protective crush resistance and fire safety. Interlocked armor eliminates the need for ductwork or conduit. Cables utilizing this armor option are ideally suited for routing inside plenum areas or in riser shafts.

Outer Jacket (optional)

Indoor Fiber


FiberCount FibersperUnit in mm lb/K-ft kg/km inch cm inch cm

2 - .52 13.2 119 179 10 26 8 20

4 - .55 14.0 127 190 11 28 8 21

6 - .57 14.5 131 196 11 29 9 22

8 - .57 14.5 134 201 11 29 9 22

10 - .59 15.0 137 205 12 30 9 23

12 - .61 15.5 145 217 12 31 9 23

18 6 .85 21.6 279 419 17 43 13 32

24 6 .85 21.6 270 405 17 43 13 32

30 6 .90 22.9 307 460 18 46 13 34

36 6 .95 24.1 374 560 19 48 14 36

36 12 .96 24.4 374 560 19 49 15 37

48 12 .96 24.4 365 547 19 49 15 37

60 12 1.03 26.2 411 616 20 52 15 39

72 12 1.10 27.9 469 703 22 56 17 42

96 12 1.35 34.3 671 1,006 27 69 20 51

144 12 1.35 34.3 671 1,006 27 69 20 51


BendRadius

CableWeight

Loose Tube Interlock Armor Riser (OFCR FT-4)

FiberCount FibersperUnit in mm lb/K-ft kg/km inch cm inch cm

2 - .43 11.0 120 179 9 22 7 17

4 - .44 11.2 127 190 9 22 7 17

6 - .46 11.6 130 196 9 23 7 17

8 - .46 11.8 135 201 9 24 7 18

10 - .48 12.3 137 205 10 25 7 18

12 - .50 12.7 142 217 10 25 7 19

18 6 .67 16.9 248 419 13 34 10 25

24 6 .67 16.9 248 405 13 34 10 25

30 6 .75 19.1 312 460 15 38 11 29

36 6 .81 20.6 349 560 16 41 12 31

36 12 .83 21.0 349 560 17 42 13 32

48 12 .83 21.0 362 547 17 42 13 32

60 12 .89 22.7 420 616 18 45 13 34

72 12 .95 24.2 537 703 19 48 14 36

96 12 1.10 28.0 760 1,006 22 56 17 42

144 12 1.20 30.6 895 1,006 24 61 18 46


BendRadius

CableWeight

Loose Tube Interlock Armor Plenum (OFCP FT-6)

Indoor Fiber


FutureFLEX® Air-Blown Fiber fromSumitomoElectricLightwave

Why FutureFLEX? With the onslaught of bandwidth-rich services and technologies, uncertain network growth and the demands of doing more with decreasing budgets, IT and network managers require a flexible infrastructure that responds immediately to growing bandwidth requirements and the demands of quick project turnaround in real-time. They've found their solution with FutureFLEX air-blown fiber.

Conventional cabling infrastructures force IT and facilities managers to make uncertain and costly long-term decisions about what kind of fiber and how much to install for the next five to six years, paralyzing the network by limiting change, consigning today’s capital for tomorrow’s unforeseen projects and risking potential network obsolescence. FutureFLEX empowers network infrastructures with a continuously renewable life cycle. It has become the preferred LAN infrastructure for many of the world’s foremost enterprise networks, including: The Pentagon, CNN, ESPN, Johns Hopkins University, Vancouver International Airport, MGM Grand, Getty Center and many more.

How It WorksUnlike conventional network infrastructures, FutureFLEX’s point-to-point architecture enables any type and amount of fiber to be blown in and blown out anywhere and at any time throughout your campus network in a matter of minutes or hours for fast and easy network upgrades, expansions and reconfigurations, without the investment in dark fiber.

UltimateFlexibillityAt the heart of the FutureFLEX system is an infrastructure of compact tube cable used in place of traditional innerduct. In almost all installations, tube cable is installed with more cells than are currently required to ensure room for expansion.

FutureFLEX’spoint-to-pointarchitectureisrevolutionizingtheenterpriseinfrastructurebydevelopingaready-for-anythingLANthatprovides:

• Bandwidth-on-demand• Immediate network scalability• Fast and easy network upgrades, expansions and reconfigurations in minutes or hours versus the weeks or

months associated with conventional infrastructures• No disruption to daily operations or the workplace through the elimination of construction work and crews• Quick implementation of bandwidth-rich emerging technologies • Immediate control of nearly unlimited network capacity• Clean and environmentally friendly installation of fiber, eliminating the need for infectious disease and other

health-related regulatory processes• Easy demarcation for classification of network pathways• Pay-as-you-go budget decisions, one project at a time• Project costs that are typically 1/10 of that associated with a conventional infrastructure, thereby yielding

continuous return on investment

Power&TelisanauthorizeddistributorofSumitomo

FutureFLEXair-blownfiber.

FutureFLEX® Air-Blown Fiber

Fiber Optic

Documents

Transcript of Fiber Optic