Fiat Ducato / Citroën Jumper / Peugeot Boxer Brief LED ... · Fiat Ducato / Citroën Jumper /...
Transcript of Fiat Ducato / Citroën Jumper / Peugeot Boxer Brief LED ... · Fiat Ducato / Citroën Jumper /...
Fiat Ducato / Citroën Jumper / Peugeot Boxer
LED-daytime running light setBrief
Information
Fro
ntlig
hting
Ideas today forthe cars of tomorrow
For further details visit:
Find your local Hella Service Partner garage here:
www.daytime-running-light.com
www.hella.com/lightshow
www.hella-service-partner.com
Vehicle application: Fiat Ducato from model year 07/06, Peugeot Boxer from model year 04/06,
Citroen Jumper from model year 04/06
Product features � Radiant, brilliant white, rod-shaped
signal light off ers innovative LED
power with fi ve diodes per light.
� The high-performance LEDs have a
service life of more than 10,000
hours and therefore last as long as
the vehicle.
� The transparent lens off ers a clear
view of the refl ector.
� Low power consumption:
7 W at 12 V
� The design trims can be painted in
the colour of your choice
� The daytime running light set is ECE
and SAE type-approved
Scope of supply
� 2 daytime running lights
� 2 vehicle-specifi c design trims with
opening and mounting bracket
� 1 professional harness
� Fastening material (for easy
mounting)
� Installation Instructions
� 1 relay
Part no. 2PT 010 043-811
Optional accessories (not included in the scope of supply)
Extension cable 2-pole,
length 500 mm8KB 178 139-001
Ideas today forthe cars of tomorrow
© H
ella
KG
aA
Hueck &
Co
., L
ipp
sta
dt
12.1
0
Daytime running light provides a decisive safety advantage in
road traffi c and prevents 58% of accidents which result in
serious injuries*.
* Study carried out by the SWOV-Institute for Road Safety Research on behalf of
the EU.
Fig.: System comparison: low beam versus daytime running light
Attachment regulations
* When used as a position light, the minimum attachment
height must be 350 mm and the maximum distance from the
outside edge must be 400 mm.
** In the case of vehicles with a width <1,300 mm, the distance
has to be at least 400 mm.
See the internet for further legal stipulations and attachment
regulations or ask at a qualifi ed garage.
Installation
The daytime running light sets can be mounted easily:The lights can be mounted or clicked into position on the side in
a prepared cut-out in the bumper using a supplied fi tting spring.
Alternatively, they can be mounted respectively on two screw
bosses on the rear of the casing.
Suitable screws are provided with the fi ttings in the scope of
supply. Metal holders for connecting to a sturdy point on the
bumper need to be created individually by the customer.
For more information please refer to the assembly instructions.