Draft_2009

Secretariat: Twinning: SAC / DIN

Secretary: Li, Yanqing [email protected]

ISO/TC 8 “Ships and marine technology”

Status report

ISO/TC 8 Ships and marine technology...........................................................................................................3 ISO/TC 8 Advisory Group (AG) ..........................................................................................................................6 ISO/TC 8/SC 1 Lifesaving and fire protection..................................................................................................7 ISO/TC 8/SC 2 Marine environment protection............................................................................................12 ISO/TC 8/SC 3 Piping and machinery ............................................................................................................16 ISO/TC 8/SC 4 Outfitting and deck machinery............................................................................................22 ISO/TC 8/SC 6 Navigation.................................................................................................................................25 ISO/TC 8/SC 7 Inland navigation vessels.......................................................................................................29 ISO/TC 8/SC 8 Structures....................................................................................................................................32 ISO/TC 8/SC 9 General requirements.............................................................................................................35 ISO/TC 8/SC 10 Computer applications ........................................................................................................37 ISO/TC 8/SC 11 Intermodal and short sea shipping....................................................................................39 ISO/TC 8/SC 12 Large Yachts ...........................................................................................................................40 Annex A List of IMO-link-NR’s ........................................................................................................................41 Annex B Index on IMO Resolutions .............................................................................................................51 Annex C Index on ISO standard numbers .................................................................................................53 Annex D The allocation of the numbers of work items to the Sub Committees................................63 Annex E The IMO-link-NR's are assigned to the ISO/TC 8 Subcommittees and IMO bodies........64 Annex F Explanation of current stage abbreviation ...............................................................................65 Annex G Participation table...........................................................................................................................67 Annex H Sub Committee Chairman/Secretary........................................................................................77 Annex I Liaison list for ISO/TC 8 and TC 8 Subcommittees....................................................................78

doc. nr. ISO/TC 8 N 1000 R 12 DRAFT

date 2007-10-25 total pages 80 supersedes document R 11

ISO/TC8 N1000 R12 Status report page 2 General introduction This “living” comprehensive document is regularly updated, based upon information collected from documents and reports from the Sub Committees and Working Groups. The permanent document number ISO/TC 8 N 1000 will be retained, also for future revisions of this document (to be indicated by R 1, R 2 etc.). The current version of this document is Appendix 1 “Work programme details” to the ISO/TC 8 Business Plan. Scope, structure and programme of work of ISO/TC 8 and subcommittees This part of the document contains the scopes and structure of ISO/TC 8 and its subcommittees, as well as the allocation of existing standards and (proposed) work items to these SC’s and WG’s. A distinction is made between “Registered Work Items” that are formally approved and registered in the program of work of ISO and “Possible new work items”. These “Possible new work items” can range from just suggestion that some item could be worthwhile studying (Preliminary stage) up to items for which a new project is under review (Proposal Stage). For ease of reference all items have been given an internal ISO/TC 8 work item number e.g. [01.01], indicating the SC and a two digit reference number. Annex D gives some statistical information on the number of work items assigned to each ISO/TC 8 subcommittee. Work items of mutual interest to IMO and ISO/TC8 Several work items are regarded to be of mutual interest to ISO/TC 8 and the International Maritime Organization IMO. These items are either requested by IMO or are initiated by ISO/TC 8 itself. These items are indicated by an IMO-link –NR. The IMO-link-NR refers to the list in Annex A of this document. The relevant IMO Resolutions and the titles of subjects are given in Annex B. Further Annexes Annex C : index on ISO standard numbers with references to the internal ISO/TC 8 work item number and the IMO-link-NR. Annex E : assignment of IMO-link-NR’s to the different ISO/TC 8 and IMO bodies, thus indicating the major fields of common interest. Annex F : explanation of ISO stage codes. Annex G : Table of the participating and observing Countries within ISO/TC 8 and its SCs. Annex H : List of the Chairmen and the Secretaries in TC8/Subcommittees. World Wide Web An electronic version of this document is to be found on site: http:isotc.iso.ch/livelink/livelink TC8 General information

ISO/TC8 N1000 R12 Status report

page 3 ISO/TC 8 Ships and marine technology Chairman: Capt. Charles H. Piersall (USA) (1995 - 2009) Secretariat: Mr. Yanqing Li (SAC) Scope: Standardization of design, construction, structural elements, outfitting parts, equipment, methods and technology, and marine environmental matters, used in shipbuilding and the operation of ships, comprising sea-going ships, vessels for inland navigation, offshore structures, ship-to-shore interface and all other marine structures subject to IMO requirements. Excluded: - electrical and electronic equipment on board ships and marine structures (IEC/TC 18 and IEC/TC 80); - internal combustion engines (ISO/TC 70); - offshore structures for petroleum and natural gas industries, including procedures for assessment of the site specific

application of mobile offshore drilling and accommodation units for the petroleum and natural gas industry (ISO/TC 67/SC 7);

- steel and aluminium structures (ISO/TC 167); - equipment and construction details of recreational craft and other small craft (not being lifeboats and lifesaving

equipment) less than 24 metres overall length (ISO/TC 188); - sea bed mining; - equipment which is not specific for use on board ships and marine structures (e.g. pipes, steel wire ropes, etc.) and

falling within the scope of particular ISO technical committees with which a regular mutual liaison must be maintained. Meetings Report 1) 1949-06 Paris, France 2) 1952-11 the Hague, Netherlands 3) 1956-11 Genoa, Italy 4) 1960-10 Düsseldorf, Germany 5) 1964-10 Brussels, Belgium 6) 1967-06 Moscow, USSR 7) 1970-10 London, UK 8) 1973-10/11 Tokyo, Japan 9) 1977-06 Goteborg, Sweden 10) 1980-11 Gdansk, Poland 11) 1985-07-04/05 Paris, France 12) 1990-10-15/18 Tokyo, Japan 8 N 782 13) 1994-09-08/11 Norway 8 N 840 14) 1995-10-13/15 Beijing, China 8 N 872 15) 1996-10-14/16 Cascais, Portugal 8 N 900 16) 1997-10-21/22 Hamburg, Germany 8 N 914 17) 1998-10-11/13 Maldon, United Kingdom 8 N 930 18) 1999-10-20/21 Tokyo, Japan 8 N 942 19) 2000-10-24/25 Gdansk, Poland 8 N 953 20) 2001-10-23/24 Roseau, Dominica 8 N 964 21) 2002-10-23/24 Busan, Rep. of Korea 8 N 971 22) 2003-10-21/22 Panama , Rep. of Panama 8 N 979 23) 2004-10-20/21 Dalian, China 8 N 986 24) 2005-10-25/26 New York, USA 8 N 998 25) 2006-10-17/18 Hamburg, Germany 8 N 1012 26) 2007-10-31 – 11-01 Santa Cruz de Tenerife, Spain 8 N

Working Group : WG 1 Ship Recycling (Convener : CAPT Charles Piersall, Secretary: Mrs. Maja Buntrock) Work items assigned to WG 1 : [00.04], [00.05], [00.06], [00.07], [00.08], [00.09], [00.10], [00.11 ] WG 1 Meetings: 1) 2007-09-12/13 Washington

ISO/TC8 N1000 R12 Status report page 4 Possible new work items: 2

ISO 30006, Ship recycling management systems – Guidelines on surveying of ships for hazardous materials and minimum amount or content of hazardous materials to be reported

( Stage 00.00 ) ISO 30007 Ship recycling management systems – Methods to remove asbestos in ships (Stage 00.00 ) Preparatory Stage: 6 [ 00.04 ] ISO 30000, Ship recycling management systems - Specifications for management

systems for safe and environmentally sound ship recycling facilities ( Stage 20.20 ) [ 00.05 ] ISO 30001, Ship recycling management systems - Best practice for ship recycling

facilities - Assessment and plans ( Stage 20.00 ) [ 00.06 ] ISO 30002, Ship recycling management systems - Guidelines for selection of ship

recyclers (and pro forma contract) ( Stage 20.00 ) [ 00.07 ] ISO 30003, Ship recycling management systems - Requirements for bodies providing

audit and certification of ship recycling management systems ( Stage 20.00 ) [ 00.08 ] ISO 30004, Ship recycling management systems - Guidelines for implementing ISO

30000 ( Stage 20.00 ) [ 00.09 ] ISO 30005, Ship recycling management systems - Information control for hazardous

materials in the manufacturing chain of shipbuilding and ship operations ( Stage 20.00 ) Working Groups: WG 2 Security Management System (Convener : Ms. Nancy Williams, Co Convener: Mr. Peter Mackenbach) Work items assigned to WG 2: [ 00.01 ], [ 00.02 ], [ 00.03 ] WG 2 meetings: 1) 2005-03-22/23 London, UK 2) 2005-04-27/29 Delft, The Netherlands 3) 2005-07-14/15 Gamboa, Panama 4) 2006-01-30/02-01 Copenhagen, Denmark 5) 2006-04-04/07 Rotterdam, The Netherlands Published standards: 5 New [ 00.01 ] ISO 28000, Specification for security management systems for the supply chain ( IMO-link-NR 69 Stage 60.60 Published on 2007-09-21 ) New [ 00.03 ] ISO 28003, Security management systems for the supply chain-Requirements for the

bodies providing audit and certification of supply chain security management systems ( IMO-link-NR 69 Stage 60.60 Published on 2007-08-02) [ 00.02P ] PAS 28004:2006Security management systems for the supply chain-Guidelines for the

implementation of ISO\PAS28000 ( IMO-link-NR 69 Stage 60.60 Published 2006-09-01 ) [ 00.01P ] PAS 28000:2005Specification for security management systems for the supply chain ( IMO-link-NR 69 Stage 60.60 Published on 2005-11-15 ) [ 00.03P ] PAS 28003:2006Security management systems for the supply chain-Requirements for

bodies providing audit and certification of security management systems ( IMO-link-NR 69 Stage 60.60 Published 2006-10-01 )


page 5 Registered Work items: 1 Enquiry Stage: 1 New [ 00.02 ] DIS 28004, Security management systems for the supply chain – Guidelines for the

implementation of ISO/PAS 28000 ( IMO-link-NR 69 Stage 60.00: 2007-09-28)

ISO/TC8 N1000 R12 Status report page 6 ISO/TC 8 Advisory Group (AG) Chairman: Capt. Charles H. Piersall (USA) (1995 - 2009) Scope: The ISO/TC8 Advisory Group shall advise and assist the chairman and the secretariat with co-ordination, planning and steering of the work and other specific tasks. Meetings Report 1) 1974-02-07/08 Delft, Netherlands AG N 5 2) 1974-05-21/22 Delft, Netherlands AG N 12 3) 1974-10-28/29 Delft, Netherlands AG N 19 4) 1975-05-05/06 Oslo, Norway AG N 26 5) 1976-11-04/05 Wallsend, UK AG N 29 6) 1977-09-19/20 Madrid, Spain AG N 49 7) 1978-10-09/10 Genoa, Italy AG N 70 8) 1979-10-24/25 New Delphi, India AG N 98 9) 1981-09-29/30 Gdansk, Poland AG N 156 10) 1982-11-09/10 Hamburg, Germany AG N 186 11) 1984-05-02/03 Delft, Netherlands AG N 199 = 8 N 674 12) 1984-12-11/12 Delft, Netherlands AG N 230 13) 1986-02-04/05 Paris, France AG N 248 14) 1987-05-12/14 London, UK AG N 262 15) 1988-09-27/29 Hamburg, Germany AG N 286 16) 1989-09-25/27 Delft, Netherlands AG N 317 17) 1991-10-14/16 Delft, Netherlands AG N 361 18) 1992-10-19/22 Odense, Denmark AG N 398 19) 1993-10-11/13 Annapolis, USA AG N 436 20) 1995-04-19/20 Delft, Netherlands AG N 457 21) 1995-10-15 Beijing, China (with plenary) AG N 463 22) 1996-03-13/14 Genoa, Italy AG N 482 = 8 N 876 23) 1996-10-16 Cascais, Portugal (with plenary) AG N 486 = 8 N 902 24) 1997-04-03/04 Charlottenlund, Denmark AG N 495 = 8 N 903 25) 1997-10-23 Hamburg, Germany (with plenary) AG N 502 26) 1998-06-11/12 Lisbon, Portugal AG N 513 = 8 N 919 27) 1998-10-14 Maldon, United Kingdom (w. plenary) AG N 517 28) 1999-05-04/05 Galati, Romania AG N 525 29) 1999-10-22 Tokyo, Japan (with plenary) AG N 532 30) 2000-05-03/04 Azores, Portugal AG N 542 31) 2000-10-26 Gdansk, Poland AG N 548 32) 2001-06-05/07 St. Petersburg AG N 558 33) 2001-10-25 Roseau, Dominica AG N 567 34) 2002-06-05/06 Spain, Cadiz AG N 573 35) 2002-10-25 Busan, Rep. of Korea AG N 580 36) 2003-06-17/19 Malmö, Sweden AG N 593 37) 2003-10-23 Panama, Rep. of Panama AG N 599 38) 2004-06-1/3 Geneva, Switzerland AG N 605 39) 2004-10- 22 Dalian, China AG N 616 40) 2005-06- 7/8 Trieste, Italy AG N 624 41) 2005-10- 28 New York, USA AG N 633 42) 2006-06-06/08 Trondheim, Norway AG N 640 43) 2006-10-20 Hamburg, Germany AG N 643 44) 2007-06- Sao Paulo, Brazil AG N 45) 2007-11-03 Santa Cruz de Tenerife, Spain AG N Working Groups: Ad-Hoc Group for Education (Leader: Prof. Jeong Je Kim)


page 7 ISO/TC 8/SC 1 Lifesaving and fire protection Chairman: Mr. Claudio Abbate (UNI / Italy) (2000 – 2008) Secretariat: Mr. George Grills (ANSI / U.S. Coast Guard) Scope: Standardization of marine lifesaving and fire protection design, construction, equipment, materials and technology used in shipbuilding and the operation of ships in support of requirements developed by the International Maritime Organization (IMO) and the needs of the world maritime industry. SC1 Meetings: 1) 1995-06-20/21 Philadelphia, USA 2) 1996-03-04/05 Baltimore, USA 3) 1997-04-28/29 Baltimore, USA 4) 1998-03-30/31 Baltimore, USA 5) 1999-03-15/16 London, UK 6) 2000-05-15/16 Washington, USA 7) 2001-04-18/20 Copenhagen, Denmark 8) 2002-04-18/19 Tokyo, Japan 9) 2003-04-14/16 Baltimore, USA 10) 2004-04-27/28 Viana do Castelo, Portugal 11) 2005-06-13/15 Busan, Republic of Korea 12) 2006-04-10/12 Vancouver, Canada 13) 2007-05-14/16 Stockholm, Sweden 14) 2008-Spring Tokyo or Kyoto, Japan Working Groups: WG 1 Life saving appliances and arrangements (Convener Mr. Jens Peter Bie, DS) Work items assigned to WG 1: [ 01.06DAM ], [ 01.14 ], [ 01.03R ], [ 01.57 ], [ 01.60 ] WG 2 Pilot and embarkation ladders (discontinued; consolidated with WG1) WG 3 Fire protection (Convener Mr. Tatsuhiro Hiraoka, Japan) Work Items assigned to WG 3: [ 01.32 ], [ 01.45 ], [ 01.55 ], [ 01.69 ] The former WG 1 meetings: 1) 1996-12-10/12 London, UK 2) 1997-04-27 Baltimore, USA 3) 1997-10-02/03 Copenhagen, Denmark 4) 1998-10-01/02 Hamburg, Germany 5) 2001-04-18 Charlottenlund, Denmark 6) 2001-11-28/29 New Orleans, USA 7) 2002-04-17 Tokyo, Japan 8) 2003-01-13/14 Copenhagen, Denmark 9) 2003-04-14/16 Baltimore, USA 10) 2003-10-13/14 Genoa, Italy 11) 2005-02-12/13 Miami, USA 12) 2005-06- 13/15 Busan, Republic of Korea 13) 2006-12-11/12 Arlington, USA 14) 2007-05-14 Stockholm, Sweden 15) 2008-03 Bonn, Germany WG 3 meetings: 1) 1996-06-04/05 Genoa, Italy 2) 1996-11-25/27 Hamburg, Germany 3) 1997-04-27 Baltimore, USA 4) 1997-10-02/03 Copenhagen, Denmark 5) 1998-03-29 Baltimore, USA 6) 1998-06-15/16 Lübeck, Germany

ISO/TC8 N1000 R12 Status report page 8 7) 1998-08-20/21 Genoa, Italy 8) 1999-09-29/10-1 Copenhagen, Denmark 9) 2001-04-18 Charlottenlund, Denmark 10) 2001-10-30/31 Genoa, Italy 11) 2002-04-17 Tokyo, Japan 12) 2002-11-05/07 Stockholm, Sweden 13) 2003-04-14/16 Baltimore, USA 14) 2003-10-15/17 Trieste, Italy 15) 2004-04-27/28 Viana do Castelo, Portugal 16) 2005-02-12/13 Miami, USA 17) 2005-06- 13/15 Busan ,Republic of Korea 18) 2006-07-12/13 Gerona, Italy 19) 2007-01- Delft, Netherlands 20) 2007-05-14 Stockholm, Sweden 21) 2007-11-08/09 London, UK Any other matters of importance to ISO/TC 8: Several standards at various stages of development were approved for re-instatement into the work programme. Please refer to the ISO/TC 8/SC 1 “Exception report” submitted to the 44th meeting of the ISO/TC 8 AG (Sao Paulo, 2007-06-04/07) by the Secretary, ISO/TC 8/SC 1. Liaisons (11): ISO/TC 21, ISO/TC 92/SC 1, TC 94, TC 145/SC 2, TC 188, IACS, IMO (FP), ITN, IMPA, EMSA, ICOMIA Published standards: 16 [ 01.01 ] ISO 799:2004, Shipbuilding - Pilot ladders ( IMO-link-NR 43, Stage 90.60 ) [ 01.02 ] ISO 5488:1979, Shipbuilding - Accommodation ladders ( IMO-link-NR 43, Stage 90.92 ) [ 01.04 ] ISO/TR 6065:1991, Shipbuilding and marine structures - Inflatable liferafts - Materials ( IMO-link-NR 09, Stage 60.60 ) [ 01.06 ] ISO 7061:1993, Shipbuilding - Aluminium shore gangways for seagoing vessels ( IMO-link-NR 77, Stage 90.92 ) [ 01.07 ] ISO 7364:1983, Shipbuilding and marine structures - Deck machinery - Accommodation

ladder winches ( IMO-link-NR 74, Stage 90.93 ) [ 01.08 ] ISO/TR 14564:1995, Shipbuilding and marine structures - Marking of escape routes ( IMO-link-NR 14, Stage 60.60 ) [ 01.11 ] ISO 15370:2001, Ships and marine technology - Low-Location Lighting on passenger

ships-Arrangement ( IMO-link-NR 17, Stage 20.99; under revision with CD in preparation; Target Dates:

CD-2007-04-30, DIS-2008-04-30, FDIS-2009-10-31, IS-2010-04-30 ) [ 01.12 ] ISO 15371:2000, Ships and marine technology - Fire extinguishing systems for protection

of galley deep frying equipment - Fire tests ( IMO-link-NR 46; Stage 20.99; under revision with CD in preparation; Target Dates: CD-2007-04-30, DIS-2007-10-31, FDIS-2008-10-31, IS-2009-04-30; WG 3 )

[ 01.13 ] ISO 15372:2000, Ships and marine technology - Inflatable rescue boats - coated fabrics for inflatable chambers

( IMO-link-NR 53, Stage 90.60 ) [ 01.14 ] ISO 15736:2006, Ships and marine technology - Pyrotechnic life-saving appliances –

Testing, inspection, and marking of production units ( IMO-link-NR 60, 78; Stage 60.60 ) [ 01.16 ] ISO 15734:2001, Ships and marine technology - Hydrostatic release units ( IMO-link-NR 57, Stage 90.60 ) [ 01.17 ] ISO 15738:2002, Ships and marine technology - Gas inflation systems for inflatable

life-saving appliances ( IMO-link-NR 59, 67, 68, Stage 90.60 ) [ 01.41 ] ISO 17339:2002, Ships and marine technology - Sea anchors for survival craft and

rescue boats


page 9 ( IMO-link-NR 65, Stage 60.60 ) [ 01.22 ] ISO 17631:2002, Ships and marine technology - Shipboard plans for fire protection,

life-saving appliances and means of escape ( IMO-link-NR 14, 17, Stage 90.60 ) [ 01.35 ] ISO 18813:2006, Ships and marine technology - Survival equipment for survival crafts

and rescue boats ( IMO-link-NR 18, Stage 60.60 Published 2006-04-01 ) [ 01.60 ] ISO 24408:2006, Ships and marine technology - Position-indicating lights for life-saving

appliances - Testing, inspection, and marking of production units ( IMO-link-NR 66, Stage 60.60 Published 2006-04-01 ) Registered Work items: 20, including 3 revision Approval Stage: 2 [ 01.03R ] FDIS 5489, Shipbuilding - Embarkation ladders (Revision of ISO 5489:1986) ( IMO-link-NR 74, Stage 50.99; Reinstated: 2007-08-09; submitted to ISO/CS for registration as FDIS: 2007-08-13 ) [ 01.59 ] PRF 23269-1, Ships and marine technology - Breathing apparatus for ships - Part 1 -

Emergency escape breathing devices (EEBB) for ship-board use ( IMO-link-NR 76, Stage 50.99 Reinstated: 2007-08-09; submitted to ISO/CS for registration as FDIS: 2007-08-14, WG3 )

Enquiry Stage: 6 [ 01.32 ] DIS 17338, Ships and marine technology - Drawings for fire protection - Indications of fire

rating by divisions ( IMO-link-NR 14, CD-2000-03-15 FDIS-2004-09-30 ( Stage 40.99; Reinstated

2007-08-09, FDIS in preparation; WG3 ) [ 01.45 ] ISO/NP 24409-1, Ships and marine technology - Design, location, and use of shipboard

signs for fire protection, life-saving appliances, and means of escape ( Stage 40.00 ; Reinstated: 2007-08-09; submitted to ISO/CS for registration as DIS: 2007-08-30; Targets: FDIS-2010-02-09, IS-2010-08-09; WG3 )

[ 01.55 ] DIS 22488, Ships and marine technology - Shipboard fire fighters' outfits ( Protective clothing, gloves, boots, and helmets )

( IMO-link-NR 76, Stage 40.99, Reinstated 2007-08-09, FDIS in preparation; WG3) [ 01.57 ] DIS 24432, Ships and marine technology - Thermal protective aids with sleeves

( Stage 40.98; DIS ballot terminated 2005-04-25, FDIS in preparation; Original DIS target 2004-04-10 )

[ 01.61 ] ISO/AWI 27991, Marine evacuation systems – Means of communication ( Stage 40.00 ; submitted to ISO/CS for registration as DIS: 2007-08-30; Targets: FDIS-2009-10-31, IS-2010-04-30; WG1 )

[ 01.69 ] ISO/DIS 19292, Ships and marine technology - Point-type resettable flame detectors for ships

( Stage 40.98; deleted in favor of applying ISO 7240-10:2007 published by TC 21 for marine use, see Resolution 62 of TC8/SC1 N 212, Stockholm 2007-05-14/16 )

Committee Stage: 4 [ 01.66 ] ISO/AWI 23269-2, Ships and marine technology – Breathing apparatus for ships – Part 2

– Breathing apparatus for shipboard firefighters ( IMO-link-NR 76, Stage 30.99; Reinstated: 2007-08-09; Target: CD-2008-07-31, DIS-2009-01-31, FDIS-2010-01-31, IS-2010-07-3; WG3 )

[ 01.67 ] ISO/AWI 23269-3, Ships and marine technology - Breathing apparatus for ships - Part 3 - Self-contained breathing apparatus (safety equipment) required by the IMO IBC and IGC Codes

( IMO-link-NR 76, Stage 30.99; Reinstated: 2007-08-09; Target: CD-2008-07-31, DIS-2009-01-31, FDIS-2010-01-31, IS-2010-07-31; WG3 )

[ 01.68 ] ISO/NP 23269-4, Ships and marine technology- Breathing apparatus for ships – Part 4 : Self-contained breathing apparatus for emergency escape required by the IMO IBC and IGC Codes

( IMO-link-NR 76, Stage 30.99; Reinstated: 2007-08-09; Target: CD-2008-08-09,

ISO/TC8 N1000 R12 Status report page 10

DIS-2009-02-09, FDIS-2010-02-09, IS-2010-08-09; WG3 ) [ 01.06 DAM ] CD DAM 7061:1993, Ships and marine technology – Pedestrian access equipment for

ships (Revision of ISO 7061:1993) ( Stage 30.99 Original target: DIS - 2002-11-30, FDIS- 2003-08-31, IS-2005-04-10, WG1 )

Preparatory Stage: 8 [ 01.65 ] ISO/AWI 27995, Aerosol fire suppression systems for ships

( Stage 20.00; pending completion of work at IMO FP subcommittee ) [ 01.71 ] ISO/AWI 24409-2, Ships and marine technology - Design, location, and use of shipboard

signs for fire protection, life-saving appliances, and means of escape ( Stage 20.99; Registration Date 2007-05-16; WG3 )

[ 01.72 ] ISO/AWI 24409-3, Ships and marine technology - Design, location, and use of Shipboard signs for fire protection, life-saving appliances, and means of escape

( Stage 20.99 ; Registration Date 2007-05-16; WG3 ) [ 01.74 ] ISO/AWI 27993, Guidelines for development of instructions for action in survival craft

( Stage 20.00; pending possible input from ILAMA and IASST; Target Dates: CD- 2007-05-18, DIS- 2007-11-18; FDIS- 2008-11-18, IS- 2009-05-18 )

ISO/AWI 7240-26, Oil mist detectors ( transferred from ISO/TC 21; stage 20.99; CD in preparation; Target Dates: CD- 2007-04-30, DIS- 2008-04-30, FDIS- 2009-10-31, IS- 2010-04-30; WG3 )

ISO/AWI 17631 Amd 1, Shipboard plans for fire protection, life-saving appliances and means of escape (Revision of ISO 17631:2002)

( Stage 20.00; Start Date: 2007-06-20 ) ISO/AWI 27992, Marine evacuation systems – Installation testing

( Stage 20.20; Target Dates: CD- 2007-04-30, DIS- 2007-10-31, FDIS- 2008-10-31, IS- 2009-04-30; WG1; Registration Date: 2006-05-18 )

ISO/AWI 27994, Standard operating method for pyrotechnic distress signals ( Stage 20.00; pending a draft submission from ILAMA; Target Dates: CD- 2007-04-30, DIS- 2007-10-31, FDIS- 2008-10-31, IS- 2009-04-30; Registration Date: 2006-05-18 )

Possible new work items: 20 Proposal stage: 8 [ 01.18 ] PRF 15735, Ships and marine technology - Service of inflatable liferafts –

Training of servicing technicians and format of servicing records ( IMO-link-NR 58, 67, 68; Stage 10.98; item currently dropped from work programme, pending submission to ISO/CS for reinstatement and publication via proof procedure; Original Targets: DIS-2000-12-20, IS-2004-08-30; WG1 )

[ 01.33 ] PRF 16848, Ships and marine technology - Pilot accommodation ladders ( IMO-link-NR 43; Stage 10.98; item currently dropped from work programme, pending submission to ISO/CS for reinstatement and publication via proof procedure, see Viana Resolution 45 and Pusan Resolution 52; Original target: FDIS-2001-03-30 IS-2004-09-30; WG1 )

[ 01.43 ] NP Prototype testing of pyrotechnic life-saving appliances ( Stage 10.00 WG1 )

[ 01.58 ] NP Desalinators for survival craft ( Stage 10.00 )

[ 01.62 ] NP Inspection procedure for life boat, launching mechanisms ( Stage 10.00 )

[ 01.63 ] NP Material standards for lifeboats and rigid rescue boats ( Stage 10.00 )

[ 01.64 ] NP Performance testing and approval standards for fire safety systems ( Stage 10.00 )

[ 01.73 ] NP Measurement, inspection, and servicing of low location lighting systems ( Stage 10.00 )

Preliminary items: 12


page 11 [ 01.19 ] PWI Inflatable life raft stability

( Stage 00.00 ) [ 01.23 ] PWI Fire test procedure for approval of non-combustible composites

( Stage 00.00 ) [ 01.24 ] PWI Fire test procedure for approval of composites use on HSCs

( Stage 00.00 ) [ 01.25 ] PWI Fire door construction standard

( Stage 00.00 ) [ 01.26 ] PWI Fire test procedures for approval of glass divisions and windows

( Stage 00.00 ) [ 01.28 ] PWI Standard for placement of shipboard fire extinguishers

( Stage 00.00 ) [ 01.30 ] PWI Test method for approving fire extinguishers

( Stage 00.00 ) [ 01.31 ] PWI Standard for approving Halon alternative agents and fire extinguishing systems

( IMO-link-NR 21, Stage 00.00 ) [ 01.34 ] PWI Width of escape stairways on passenger ships

( IMO-link-NR 16, Stage 00.00 ) [ 01.37 ] PWI Alternative sprinkler systems

( IMO-link-NR 20, Stage 00.00 ) [ 01.38 ] PWI Design and operation of passenger ships to the needs of elderly and disabled

persons ( IMO-link-NR 38, Stage 00.00 )

[ 01.40 ] PWI Risk analysis of escape routes ( IMO-link-NR 38, Stage 00.00 )

ISO/TC8 N1000 R12 Status report page 12 ISO/TC 8/SC 2 Marine environment protection Chairman: Mr. Koichi Yoshida (Japan) (2006-2011) Secretariat: Mr. Bivan Patnaik (ANSI / U.S. Coast Guard) Scope: Standardization of marine pollution abatement materials, equipment and technologies and associated marine environmental protection operational procedures to be used in the building and operation of vessels; comprising sea-going ships, vessels for inland navigation, offshore structures, ship-to-shore interfaces and all other marine structures subject to IMO requirements. SC 2 Meetings: 1) 1995-04-25/26 New York City, USA 2) 1996-06-18/19 Oslo, Norway 3) 1997-06-17/18 Odense, Denmark 4) 1998-06-16/17 Lisbon, Portugal 5) 1999-06-10 Athens, Greece 6) 2000-06-15 Bremen, Germany 7) 2001-06-21 London, UK 8) 2002-06-06 Oslo, Norway 9) 2003-06-26 Hamburg, Germany 10) 2004-06-21/22 Trondheim, Norway 11) 2005-04--20 Tokyo, Japan 12) 2006-06-13/14 Porvoo, Finland 13) 2007-06-11/15 Cyprus 14) 2008-04-xx London, UK Working Groups: WG 1 Discharge control (no convener) WG 2 Operations- Disposal of Ship’s generated Garbage (Convenor: Dr. Behrens, Germany) 1) 2006-10-19/20 Hamburg, Germany WG 3 Environmental response (Convener Mr. Simon Rickaby, UK) Work items assigned to WG 3: [ 02.04 ], [ 02.38 ], [ 02.42 ], [ 02.46 ], [ 02.47 ], [ 02.48 ] WG2-meetings: 1) 2007-06-13 Limassol, Cyprus WG3-meetings: 1) 1995-12-14 Washington D.C., USA 2) 1996-04-18 Washington D.C., USA 3) 1996-06-18 Oslo, Norway 4) 1997-06-17 Odense, Denmark 5) 1998-06-15/16 Lisbon, Portugal 6) 1999-06-08/09 Athens, Greece 7) 2000-06-13/14 Bremen, Germany 8) 2001-06-20 London, UK 9) 2002-06-4/5 Oslo, Norway 10) 2002-09-26/27 London, UK 11) 2003-06-25 Hamburg, Germany 12) 2004-06-21/22 Trondheim, Norway 13) 2005-04-18/19 Tokyo, Japan 14) 2006-06-12 Porvoo, Finland 15) 2006-10-16/17 Hamburg, Germany 16) 2007-06-12 Limassol, Cyprus ANY OTHER MATTERS OF IMPORTANCE TO ISO/TC 8: ISO 16446, Oil spill booms-Adaptor for joining dissimilar connectors under 5-year review. Voting ends on 2007, 09-17


page 13 Liaisons: Liaisons: ISO/TC 67, ISO/TC 70, ISO/TC 146, ISO/TC 147, ISO/TC 188, ISO/TC 207, IMO (Cat A), OCIMF (Cat A), ICS (Cat A), INTERTANKO (Cat A), WSC (Cat A) Published standards: 2 [ 02.30 ] ISO 16165:2001, Ships and marine technology - Marine environment protection -

Terminology relating to environmental response ( Stage 60.60 ) [ 02.31 ] ISO 16446:2002, Ships and marine technology - Marine environment protection - Oil spill

booms - Adapter for joining dissimilar (oil spill boom) connectors ( Stage 60.60 ) Registered Work items: 8 Approval Stage: 3 [ 02.47 ] FDIS 21072-1, Ships and marine technology - Marine environmental protection -

Performance testing of oil Skimmers - Part 1: Moving water conditions ( Stage 40.00 Original target: CD2002-03-29, DIS-2003-03-29, IS2004-03-29, WG3 )

[ 02.49 ] FDIS 21072-2, Ships and marine technology-Marine environmental protection-Performance resting of oil Skimmers - Part 2: Static water conditions

( Stage 40.00 Original target: CD-2005-04-05, DIS2006-04-05, IS-2007-04-05, WG3 )

[ 02.50 ] FDIS 21072-3, Ships and marine technology-Marine environmental protection-Performance testing of oil skimmers-High viscosity oil

( Stage 30.20 ) Committee stage: 3 [ 02.38 ] CD 17896, Ships and marine technology - Marine environment protection - Mechanical

equipment for oil spill response - Booms ( Stage 30.92 Original target: DIS - 2000-10-31, FDIS-2001-07-31, IS - 2001-12-24, WG3 )

[ 02.42 ] CD 17897, Ships and marine technology - Marine environment protection - Mechanical equipment for oil spill response - Part 2: Skimmers

( Stage 30.92 Original target: DIS - 2000-10-31, FDIS-2001-07-31, IS - 2001-12-24, WG3 )

[ 02.46 ] CD 21070, Ships and marine technology - Ships board handling of ship generated garbage

( Stage 30.00 Original target: WD-2001-09-29, CD - 2002-03-29, DIS - 2003-03-29, IS - 2004-03-29, WG3 )

Preparatory Stage: 2 [ 02.04 ] AWI 21071, Ships and marine technology - Oil water separators

( IMO-link-NR 91 Stage 20.00 Original target : WD-2001-09-29, CD - 2002-03-29, DIS - 2003-03-29, IS - 2004-03-29, WG3 )

[ 02.48 ] AWI 23268, Ships and marine technology - Oil barriers - Test and certification ( Stage 20.00 Original target: WD-2002-06-28, CD - 2002-12-28, DIS - 2003-12-28, IS - 2004-12-28,WG3 )

Possible new work items: 17 Proposal Stage: 3 [ 02.28 ] NP Anti fouling paints ( Stage 10.00 If requested by IMO ) [ 02.33 ] NP Water in oil emulsions for testing of oil spill response equipment ( Stage 10.00 ) [ 02.36 ] NP HNS prevention, response and cleanup ( Stage 10.00 )

ISO/TC8 N1000 R12 Status report page 14 Preliminary Stage: 14 [ 02.03 ] PWI Environmental protection relating to drinking water supply systems and drainage

systems ( Stage 00.00 ) [ 02.05 ] PWI Gray Water treatment ( Stage 00.00 ) [ 02.06 ] PWI Black water treatment ( Stage 00.00 ) [ 02.07 ] PWI Sandblasting alternatives ( Stage 00.00 ) [ 02.09 ] PWI Compaction ( Stage 00.00 ) [ 02.11 ] PWI Comminution, maceration ( Stage 00.00 ) [ 02.12 ] PWI Sludge collection and disposal ( Stage 00.00 ) [ 02.18 ] PWI Lightering ( Stage 00.00 ) [ 02.20 ] PWI Other environmentally benign shipbuilding and repair ( Stage 00.00 ) [ 02.32 ] PWI Oil spill shoreline damage assessment ( Stage 00.00 ) [ 02.34 ] PWI Oil spill remote sensing and surveillance technology ( Stage 00.00 ) [ 02.39 ] PWI Chemical dispersants for oil spill ( Stage 00.00 ) [ 02.40 ] PWI In-situ burning of spill oil ( Stage 00.00 ) [ 02.41 ] PWI Bio-remediation of oil spills ( Stage 00.00 ) Items proposed for cancellation or transfer to another subcommittee: 17 [ 02.23 ] PWI Environmental assessments prior to entering shipyards ( transferred to ISO/TC 8/WG 1, Linked to IMO by recycling of ships ) [ 02.01 ] Alternative tanker design guidelines ( IMO-link-NR 21 ,Stage 00.00 ) [ 02.02 ] Effluent standards ( IMO-link-NR 52, Stage 00.00 ) [ 02.08 ] Vapour recovery ( IMO-link-NR 22 Stage 00.00WG1, topic 5, Prevention of air pollution from ships, ) [ 02.10 ] On-Deck Spill Containment ( Stage 00.00 ) [ 02.13 ] Ship shore interface ( Stage 00.00 ) [ 02.17 ] Emergency towing assemblies ( Stage 00.00 ) [ 02.19 ] Shipboard damage assessment ( Stage 00.00 ) [ 02.21 ] Control and salvage operations ( Stage 00.00 ) [ 02.22 ] Tug escorts ( Stage 00.00 ) [ 02.25 ] Damage assessment ( Stage 00.00 ) [ 02.26 ] Stability and residual structural damage ( Stage 00.00 ) [ 02.29 ] Tankerman training ( Stage 00.00 ) [ 02.35 ] Oil spill prevention, response and cleanup training ( Stage 00.00 ) [ 02.37 ] Spill response planning and management


page 15 ( Stage 00.00 ) [ 02.44 ] Determining oil content of water by the fluorescent method ( Stage 00.00 IMO/DE42 Report paragraph number 14.24 ) [ 02.45 ] Determining oil content of water by the IR-spectrophotometric method ( Stage 00.00IMO/DE 42 Report paragraph number14.24 )

ISO/TC8 N1000 R12 Status report page 16 ISO/TC 8/SC 3 Piping and machinery Chairman: Mr. Joseph Byrne (U.S. Maritime Administration) (2002-2008) Secretariat: Mr. Thane Gilman (U.S. Coast Guard) (2007) Scope: Standardization of design, construction, equipment and technology for piping and machinery used in shipbuilding and the operation of ships, comprising sea-going ships, fishing vessels and trawlers, vessels for inland navigation, offshore structures, ship-to-shore interfaces, and all other marine structures subject to IMO requirements. SC 3 Meetings: 1) 1995-09-14/15 Washington D.C., USA 2) 1996-10-04/05 Hamburg, Germany 3) 1997-09-17/19 Odense, Denmark 4) 1998-09-16/18 Zoetermeer, Netherlands 5) 1999-09-08/10 Copenhagen, Denmark 6) 2000-09-06/08 London, UK 7) 2001-09-12/13 Oslo, Norway 8) 2002-09-11/12 Hamburg, Germany 9) 2003-08-07 – 2003-09-08 On-line via the Internet 10) 2004-09-15/17 Washington, USA 11) 2005-05-17/19 Copenhagen, Denmark 12) 2006-10-16/17 Hamburg, Germany Working Groups: 7 WG 1 Piping and ducting systems - Identification colours (Convener Ms. Maja Buntrock of Germany, DIN)

Work items assigned to WG 1: merging of [ 03.23 ] and [ 03.24 ]. WG 5 Pressure/vacuum relief valves (Convener Mr. Eric Sorensen of Denmark)

Work items assigned to WG 5: Revision of [ 03.25 ].

WG 6 Potable water systems and drainage systems (Convener Mrs. Buntrock of Germany, DIN) Work items assigned to WG 6: [ 03.30 ], [ 03.31 ], [ 03.32 ], [ 03.33 ], [ 03.34 ], WG 7 Heating, ventilation and air-conditioning (Convener Mr. Chris Spunar, Carrier Corp. of the USA)

Work items assigned to WG 7: correction of [ 03.14 ], [ 03.15 ], revision of [ 03.21 ].


page 17 WG 9 Oil systems. Project Leader: Mr. Richard D. Delpizzo (ABS Americas of the USA, ANSI) Work items assigned to WG 9: [ 03.43 ], [ 03.44 ], [ 03.45 ], [ 03.46 ]. WG 10 Fire tests of piping components (Convener: Ms. Buntrock, DIN. Project Leader: Mr. Lippke of Germany, DIN) Work items assigned to WG 10: [ 03.26 ], [ 03.27 ]. WG 12 Ballast Water Management (Convener: Mr. Nickel, DIN)

Work items assigned to WG 12: NWIP [ 03.47 ] Published standards: 41 [ 03.01 ] ISO 484-1:1981, Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part

1: Propellers of diameter greater than 2,50 m ( Stage 90.92 ) [ 03.02 ] ISO 484-2:1981, Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part

2: Propellers of diameter between 0,80 and 2,50 m inclusive ( Stage 90.92 ) [ 03.03 ] ISO/R 538:1967, Conventional signs to be used in schemes for the installations of

pipeline systems in ships ( Stage 90.92 ) [ 03.04 ] ISO/R 644:1967, Conventional signs to be used in schemes for the installation of

ventilation systems in ships ( Stage 60.60 ) [ 03.05 ] ISO/R 784:1968, Conventional signs to be used in schemes for the installation of

sanitary systems in ships ( Stage 60.60 ) [ 03.06 ] ISO 3715-1:2002, Ships and marine technology - Propulsion plants for ships Part 1 :

Terms and definitions for geometry of propellers ( Stage 60.60 ) [ 03.35 ] ISO 3715-2:2001, Ships and marine technology - Propulsion plants for ships - Part 2 :

Vocabulary for controllable-pitch propeller plants ( Stage 60.60 ) [ 03.07 ] ISO 5483:2003, Ships and marine technology - Drain plugs, welding rings, and gaskets

for oil and water tank drains ( Stage 60.60 )

[ 03.09 ] ISO 5620-1:1992, Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 1: General requirements

( Stage 90.93 ) [ 03.10 ] ISO 5620-2:1992, Shipbuilding and marine structures - Filling connection for drinking

water tanks - Part 2: Components ( Stage 90.93 ) [ 03.11 ] ISO 5621:1984, Shipbuilding - Bilge mud boxes for machinery spaces and tunnels -

General design characteristics ( Stage 90.60 ) [ 03.12 ] ISO 5625:1978, Shipbuilding - Welded bulkhead pieces with flanges for steel pipe work -

PN 6, PN 10 and PN 16 ( Stage 90.60 ) [ 03.13 ] ISO 6454:1984, Shipbuilding - Strum boxes ( Stage 90.93 ) [ 03.14 ] ISO 7547:2002, Ships and marine technology - Air-conditioning and ventilation of

accommodation spaces on board ships - Design conditions and basis calculations ( Stage 90.20 ) [ 03.15 ] ISO 8861:1998, Shipbuilding - Engine room ventilation in diesel-engined ships - Design

requirements and basis of calculations ( Stage 90.93 ) [ 03.16 ] ISO 8862:1987, Air-conditioning and ventilation of machinery control-rooms on board

ships - Design conditions and basis of calculations ( Stage 90.93 )

ISO/TC8 N1000 R12 Status report page 18 [ 03.17 ] ISO 8863:1987, Ship's wheelhouse windows - Heating by hot air of glass panes ( Stage 90.93 ) [ 03.18 ] ISO 8864:1987, Air-conditioning and ventilation of wheelhouse on board ships - Design

conditions and basis of calculations ( Stage 90.20 ) [ 03.19 ] ISO 9099:1987, Air-conditioning and ventilation of dry provision rooms on board ships -

Design conditions and basis of calculations ( Stage 90.20 ) [ 03.20 ] ISO 9785:2002, Ships and marine technology - Ventilation of cargo spaces where

internal combustion engine vehicles may be driven - Calculation of theoretical total airflow required

( IMO-link-NR 25, Stage 90.20 ) [ 03.21 ] ISO 9943:1991, Shipbuilding - Ventilation and air-treatment of galleys and pantries with

cooking appliances ( Stage 30.20 ) [ 03.22 ] ISO 13617:2001, Ships and marine technology - Shipboard incinerators – Requirements

( IMO-link-NR 13, Stage 90.60 ) [ 03.23 ] ISO 14726-1:1999, Ships and marine technology - Identification colours for the content of

piping systems - Part 1: Main colours and media ( IMO-link-NR 02, Stage 60.60 ) [ 03.24 ] ISO 14726-2:2002, Ships and marine technology - Identification colours for the content of

piping systems - Part 2: Additional colours for media and/or functions ( IMO-link-NR 02, Stage 60.60 ) [ 03.25 ] ISO 15364:2000, Ships and marine technology - Pressure/vacuum valves for cargo

tanks ( IMO-link-NR 34, Stage 60.60 ) [ 03.26 ] ISO 15540:1999, Ships and marine technology - Fire resistance of hose assemblies -

Test methods ( IMO-link-NR 47, Stage 60.60 ) [ 03.67 ] ISO 15540 Cor1:1999, Ships and marine technology - Fire resistance of hose assemblies

- Test methods TECHNICAL CORRIGENDUM 1 ( IMO-link-NR 47 Stage 60.60 ) [ 03.27 ] ISO 15541:1999, Ships and marine technology - Fire resistance of hose assemblies - ´ Requirements on the test bench ( IMO-link-NR 47, Stage 60.60 ) [ 03.28 ] ISO 15748-1:2002, Ships and marine technology - Potable water supply on ships and

marine structures - Part 1: Planning and design ( Stage 90.20 )

[ 03.29 ] ISO 15748-2:2002, Ships and marine technology - Potable water supply on ships and marine structures - Part 2: Method of calculation

( Stage 90.20 ) [ 03.30 ] ISO 15749-1:2004, Ships and marine technology - Drainage systems on ships and

marine structures - Part 1: Sanitary drainage-system design ( IMO-link-NR 26, Stage 90.20 ) [ 03.31 ] ISO 15749-2:2004, Ships and marine technology - Drainage systems on ships and

marine structures - Part 2: Sanitary drainage, drain piping for gravity system ( IMO-link-NR 26, Stage 90.20 ) [ 03.32 ] ISO 15749-3:2004, Ships and marine technology - Drainage systems on ships and

marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems (IMO-link-NR 26, Stage 90.20 ) [ 03.33 ] ISO 15749-4:2004, Ships and marine technology - Drainage systems on ships and

marine structures - Part 4: Sanitary drainage, sewage disposal pipes ( IMO-link-NR 26, Stage 90.20 ) [ 03.34 ] ISO 15749-5:2004, Ships and marine technology - Drainage systems on ships and

marine structures - Part 5: Drainage of decks, cargo spaces and swimming pools ( IMO-link-NR 26, Stage 90.20 ) [ 03.41 ] ISO 15837:2004, Ships and marine technology - Casketed mechanical couplings for use n piping systems - Performance specification ( Stage 60.60) [ 03.42 ] ISO 15838:2003, Ships and marine technology - Fittings for use with casketed

mechanical couplings used in piping applications-Performance specification ( Stage 60.60 )


page 19 [ 03.40 ] ISO 15840:2004, Ships and marine technology - Standard specification for

Thermosetting resin fiberglass pipe and fittings to be used for marine applications ( IMO-link-NR 27, Stage 60.60 ) [ 03.47 ] ISO 18770, Ships and marine technology - Machinery Space flammable oil systems -

Guidelines to prevent leakage of flammable oil ( IMO-link-NR 74, Stage 60.60 ) [ 03.49 ] ISO 19921, Ships and marine technology - Fire resistance of metallic pipe components

with resilient and elastomeric seals-Test methods ( Stage 60.60 ) [ 03.50 ] ISO 19922, Ships and marine technology - Fire resistance of metallic pipe components

with resilient and elastomeric seals - Requirements imposed on the test bench ( Stage 60.60) Registered Work items: 8 Approval stage: 2 [ 03.25R ] ISO/FDIS 15364, Ships and marine technology - Pressure/vacuum valves for cargo

tanks ( IMO-link-NR 33, IS-2007-08-31, Stage 40.60 Revision of ISO 15364:200, DIS-2006-01-03 )

New [ 03.23R ] ISO/FDIS 14726, Ships and marine technology - Identification colours for the content of piping systems – Part 1: Main colours and media

( IMO-link-NR 02, IS-2008-06-08, Stage 40.20, Revision of ISO 14726-1:1999 and ISO 14726-2:1999, Merge with part 1 and part 2)

Committee Stage: 6 [ 03.21R ] Revision of ISO 9943:1991, Ships and marine technology - Ventilation and airtreatment of

galleys and pantries with cooking appliances ( DIS-2007-06-30, FDIS-2008-12-31, IS-2009-06-30, Stage 30.00. Revision of ISO

9943:1991 ) [ 03.43 ] ISO/CD 28520, Ships and marine technology-Lubricating oil systems- Guidance for

grades of cleanliness and flushing. ( DIS-2007-08-01, FDIS-2008-02-01, IS-2008-08-01, Stage 30.00 )

[ 03.44 ] ISO/CD 28521, Ships and marine technology – Hydraulic oil systems – Guidance for grades of cleanliness and flushing

( IMO-link-NR 33, DIS-2007-08-01, FDIS-2008-02-01, IS-2008-08-01, Stage 30.00 ) [ 03.45 ] ISO/CD 28522, Ships and marine technology – Hydraulic oil systems – Guidance for

assembling and flushing ( DIS-2007-08-01, FDIS-2008-02-01, IS-2008-08-01, Stage 30.00 )

[ 03.46 ] ISO/CD 28523, Ships and marine technology – Sampling from lubricating oil and hydraulic oil systems – Guidance for sampling of representative samples for determination of degree of cleanliness and for solid particle contamination

( DIS-2007-08-01, FDIS-2008-02-01, IS-2008-08-01, Stage 30.00 ) [ 03.67 ] ISO/CD 29501, Ships and marine technology – Preservation of the environment – Cold

ironing ( IMO-link-NR 86, CD-2007-04-30, DIS-2007-11-30, FDIS-2008-05-30, IS-2008-11-30, Stage 20.20 )

Preparatory stage: 1 NWIP: Ships and marine technology – Ballast water management systems – Discharge sampling procedures ( Stage 10.20 New project ballot initiated 6/7/2007) Possible new work items: 22 including 9 revisions Proposal Stage: 9 [ 03.14R ] NP 7547:2002, Ships and marine technology - Air-conditioning and ventilation of

accommodation spaces on board ships - Design conditions and basis calculations ( Stage 10.00 Revision of ISO 7547:2000 )

ISO/TC8 N1000 R12 Status report page 20 [ 03.26R ] NP 15540:1999, Ships and marine technology - Fire resistance of hose assemblies - Test

methods ( Stage 10.00 Revision of ISO 15540:1999 ) [ 03.27R ] NP 15541:1999, Ships and marine technology - Fire resistance of hose assemblies - ´ Requirements on the test bench

( Stage 10.00 Revision of ISO 15541:1999 ) [ 03.30R ] NP 15749-1:2004, Ships and marine technology - Drainage systems on ships and

marine structures - Part 1: Sanitary drainage-system design ( Stage 10.00 Revision of ISO 15749:2004 ) [ 03.31R ] NP 15749-2:2004, Ships and marine technology - Drainage systems on ships and

marine structures - Part 2: Sanitary drainage, drain piping for gravity system ( Stage 10.00 Revision of ISO 15749-2:2004 ) [ 03.32R ] NP 15749-3:2004, Ships and marine technology - Drainage systems on ships and

marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems ( Stage 10.00 Revision of ISO 15749-3:2004 ) [ 03.33R ] NP 15749-4:2004, Ships and marine technology - Drainage systems on ships and

marine structures - Part 4: Sanitary drainage, sewage disposal pipes ( Stage 10.00 Revision of ISO 15749-4:2004 ) [ 03.34R ] NP 15749-5:2004, Ships and marine technology - Drainage systems on ships and

marine structures - Part 5: Drainage of decks, cargo spaces and swimming pools ( Stage 10.00 Revision of ISO 15749-5:2004 ) [ 03.15R ] NP 8861:1998, Shipbuilding - Engine room ventilation in diesel-engined ships - Design

requirements and basis of calculations ( Stage 10.00 Revision of ISO 8861:1998 ) Preliminary Stage: 13 [ 03.39 ] Ships and marine technology - Centrifugal pumps for shipboard use (Stage 00.00, WG3) [ 03.48 ] Ships and marine technology - Spray shields for mechanical joints in flammable liquid

piping ( Stage 00.00 ) [ 03.52 ] Devices for monitoring and recording NOx levels in engine exhaust ( Stage 00.00 IMO/DE42 Report paragraph number 10.3, 10.9-10.13 ) [ 03.54 ] Procedures for determining the equivalency of methods to reduce Vessel NOx emissions ( Stage 00.00 IMO/DE 42 Report paragraph number 10.3) [ 03.55 ] Reducing NOx emissions by the xxx method ( Stage 00.00 IMO/DE 42 Report paragraph number 10.3 ) [ 03.56 ] Standard for vessel exhaust gas cleaning systems ( Stage 00.00 IMO/DE 42 Report paragraph number 10.3) [ 03.57 ] Reducing SOx emissions by the xxx method ( Stage 00.00 IMO/DE 42 Report paragraph number 10.3 ) [ 03.58 ] Specification for bilge alarms ( Stage 00.00 IMO/DE 42 Report paragraph number 14.24 ) [ 03.59 ] Specification for bilge monitors ( Stage 00.00 IMO/DE 42 Report paragraph number 14.24 ) [ 03.62 ] Performance standard and test procedures for equipment to monitor discharges from

cargo spaces in tankers ( Stage 00.00 IMO/DE 43 Report paragraph number 11.6-11.20 ) [ 03.63 ] Engine room arrangements, including human factors (transfer from SC9) ( Stage 00.00 Transferred from 09.22 ) [ 03.64 ] PWI Ships and marine technology- SOX Eliminatio/Minimization ( Stage 00.00 Transferred from SC 2) [ 03.65 ] PWI Ships and marine technology- NOX Eliminatio/Minimization ( Stage 00.00 Transferred from SC 2) Deleted items: 7 [ 03.36 ] PWI Code on alarms and indicators [ 03.38 ] PWI Ships and marine technology - Auxiliary single stage steam turbines for shipboard

use


page 21 [ 03.37 ] WD 16288, Ships and marine technology - Mechanical seals for shipboard pump

applications [ 03.51 ] Procedures for obtaining representative samples of on-board fuel oil [ 03.53 ] Specification for continuous emissions monitoring equipment(CEN) [ 03.60 ] Performance standards for shipboard pollution prevention equipment (e.g. oily water

separators) [ 03.61 ] Standard test fluid for shipboard pollution prevention equipment

ISO/TC8 N1000 R12 Status report page 22 ISO/TC 8/SC 4 Outfitting and deck machinery Chairman: Mr. Tong Xiaochuan (China) (2001-2009) Secretariat: Mr. Liu Zhen (SAC / China) Scope: Standardization of design, construction and operation of equipment and technology for ship outfitting and deck machinery; including ship-to-shore interface, cargo systems and lifting gear etc. used in shipbuilding and the operation of ships in support of the requirements developed by the international Maritime Organization (IMO) and the needs of the world maritime industry SC 4 Meetings: 1) 1996-08-13/14 Shanghai, China 2) 2000-10-23 Gdansk, Poland 3) 2002-10-21 Busan, Korea Rep. of 4) 2004-10-18 Dalian, China 5) 2006-10-16 Hamburg, Germany 6) 2007-10-31 – 11-01 Puerto de la Cruz, Spanien Working Groups: WG 1 Launching appliances for lifeboats (Convener Mr. Zhou Shengxian, China) Work items assigned to WG 1: [ 04.26 ] WG 2 Deck machinery (Convener Mr. Huang Xiechu, China) Work items assigned to WG 2: [ 04.04R ], [ 04.05R ] WG 3 Outfitting (Convener: Yang anli, China) Work items assigned to WG 3: [ 04.01R ] Published standards: 25 [ 04.01 ] ISO 1704, (1991, confirmed 1996, revision, WG3 ): Shipbuilding-Stub-link anchor chains [ 04.02 ] ISO 3078, ( 1987,=EN ISO 3078, WI 00300006 rejected in CEN/TC 300, confirmed

1996/1997/2002 ): Shipbuilding-Cargo winches [ 04.03 ] ISO 3730, ( 1988, confirmed 1998/2003 ): Shipbuilding-Mooring winches [ 04.04 ] ISO 3828, ( 1984, confirmed 1996, revision, WG2 ): Shipbuilding and marine

structures-Deck machinery-Vocabulary [ 04.05 ] ISO 4568, ( 2006, revision, WG2 ): Shipbuilding-Sea-going, vessels-Windlasses and

anchor capstans [ 04.06 ] ISO 6043, ( 1985, confirmed 1995/1996/2000/2005 ): Shipbuilding and marine

structures-Eye and fork assemblies under tension load-Main dimensions [ 04.07 ] ISO 6044, ( 1985, confirmed 1995/1996/2000/2005 ): Shipbuilding and marine

structures-Derrick boom heel fittings-Main dimensions [ 04.08 ] ISO 6045, ( 1987, confirmed 1992/1996/1998/2003 ): Shipbuilding and marine

structures-Bearings for derrick goosenecks-Assemblies and Components [ 04.09 ] ISO 6115, ( 1988, =EN ISO 6115: 1996, CEN/TC 300, 00300007, confirmed

1998/2003 ): Shipbuilding-Trawl winches [ 04.10 ] ISO 6325, ( 1987, confirmed 1995/1997/2002 ): Shipbuilding-cable stoppers [ 04.11 ] ISO 6482, ( 1980, confirmed 1995/1996/2000/2005, revision, WG2 ): Shipbuilding-Deck

machinery-Warping end profiles [ 04.12 ] ISO 6555, ( 1988,=EN ISO 6555, WI 00300008 rejected in CEN/TC 300, confirmed

1996/1998/2003 ): Shipbuilding-Topping winches [ 04.13 ] ISO 6812, ( 1983, confirmed 1993/1996/1998/2003 ): Roll on/roll off ship-to-shore

connection-Interface between terminals and ships with straight stern/bow ramps [ 04.14 ] ISO 7365, ( 1983, confirmed 1998/2003 ): Shipbuilding and marine structures-Deck

machinery-Towing winches for deep sea use [ 04.15 ] ISO 7824, ( 1986, confirmed 1991/1996/2001/2006, revision, WG2 ): Shipbuilding and

marine structures-Lubrication nipples-Cone and flat types


page 23 [ 04.16 ] ISO 7825, ( 1985, confirmed 1995/1996/2000/2005, revision, WG2 ): Shipbuilding-Deck

machinery-General requirements [ 04.17 ] ISO 8146, ( 1985, confirmed 1995/1998/2000/2005 ): Shipbuilding and marine

structures-Oval eye-plates [ 04.18 ] ISO 8147, ( 1995, confirmed 2000/2005 ): Shipbuilding and marine structures-Derrick rigs

and component parts-Vocabulary [ 04.19 ] ISO 8148, ( 1985, conformed 1995/1998/2000/2005 ): Shipbuilding and marine

structures-Derrick boom head-fittings-Fixed type [ 04.20 ] ISO 8314, ( 1987, confirmed 1992/1996/1997/2002 ): Shipbuilding and marine

structures-Trunnion pieces for span bearings and lead block bearings [ 04.21 ] ISO 8431, ( 1988, confirmed 1998/2003 ): Shipbuilding Fixed jib cranes-Ship-mounted

type for general cargo handling [ 04.22 ] ISO 9089, ( 1989, confirmed 1992/1996/2004, revision, WG2 ): Marine structures-Mobile

offshore units-Anchor winches [ 04.23 ] ISO 9367-1, ( 1989 ): Lashing and securing arrangements on road vehicles for sea

transportation on Ro/Ro ships-general requirements-Part1:Commercial vehicles and combination of vehicles, semi-trailers excluded ( with ISO/TC22/WG7 )

[ 04.24 ] ISO 9367-2, ( 1994 ): Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships-general requirements-Part2:Semi-trailers ( with ISO/TC22/WG7 )

[ 04.26 ] ISO 15516:2006, Ships and marine technology - Launching appliances for davit-launched lifeboats

Work items under construction: 3 Publication Stage: 1 [ 04.04R ] ISO 3828, Shipbuilding and marine structures – Deck machinery - Vocabulary (Revision

of ISO 3828:1984) ( Stage 60.00, Original target WD-2002-09-30, CD-2003-09-30, DIS-2004-06-30,

FDIS-2005-03-31, IS-2006-10-31, WG2 ) Approval stage: 2 [ 04.01R ] FDIS 1704, Shipbuilding - Stud-link anchor chains ( Revision of ISO 1704:1991 )

( Stage 50.20, Original target: WD-2002-09-30,CD-2003-09-30, DIS - 2004-06-30, FDIS - 2005-03-31, IS - 2006-10-31, WG3 )

[ 04.30 ] FDIS 22673, Ships and marine technology-Launching appliances for free-fall lifeboats ( Stage 50.00, Original target CD-2005-08-31, DIS - 2006-02-28, FDIS - 2007-02-28, S- 2007-8-30, WG1 )

Possible new work items: 12 including 7 revisions Standards to be developed as soon as possible: 0 Proposal stage: 4 [ 04.11R ] Revision ISO 6482:1980, Shipbuilding-Deck machinery-Warping end profiles ( WG 2 ) [ 04.23R ] Revision ISO 9367-1, ( 1989 ): Lashing and securing arrangements on road vehicles for

sea transportation on Ro/Ro ships-general requirements- Part1: Commercial vehicles and combination of vehicles, semi-trailers Excluded

( WG3, with ISO/TC22/WG7 ) [ 04.24R ] Revision ISO 9367-2, ( 1994 ): Lashing and securing arrangements on road vehicles for

sea transportation on Ro/Ro ships-general requirements-Part2: Semi-trailers ( WG3, with ISO/TC22/WG7 ) [ 04.29 ] NP Rapid deployable emergency towing apparatus for tankers ( IMO/DE 42 Report paragraph number 5.1-5.6, WG 3 )

ISO/TC8 N1000 R12 Status report page 24 Dormant inactive item: 3 [ 04.15R ] Revision ISO 7824:1986, Shipbuilding and marine structures-Lubrication nipples-Cone

and flat end type ( WG 2 ) [ 04.16R ] Revision ISO 7825:1985, Shipbuilding-Deck machinery-General requirements ( WG 2 ) [ 04.22R ] Revision ISO 9089:1989, Marine structures-Mobile offshore units-Anchor winches ( WG 2 ) Items proposed for cancellation or transfer to another Subcommittee: 5 [ 04.17R ] Revision ISO 8146:1985, Shipbuilding and marine structures-Oval eye plates ( WG 3 ) [ 04.19R ] Revision ISO 8148:1985, Shipbuilding and marine structures-Derrick boom

head-fittings-Fixed type ( WG 3 ) [ 04.25 ] NP 13819, Petroleum and natural gas industries-Offshore structures - Part 4:

Floatingstructures ( IMO-link-NR 29, with ISO/TC67/SC7/WG5 ) [ 04.27 ] Guidelines for safe ocean towing ( IMO-link-NR 39, WG 3 ) [ 04.28 ] Suitable design arrangements for container securing operations aboard ships ( IMO-link-NR 73, WG 3 )


page 25 ISO/TC 8/SC 6 Navigation Chairman: Prof. Shogo Hayashi (Japan) (2004-2010) Secretariat: Mr. Kosei Hasegawa (JISC / JSTRA) Scope: Standardization in the field of navigation, including instruments and systems etc., for navigation SC 6 Meetings: 1) 1999-10-18 Tokyo, Japan 2) 2002-10-21 Busan, Korea Rep. Of. 3) 2007-10-30 Tenerife, Spain Working Groups: WG 3 Magnetic compasses and binnacles (Convener: Prof. H. Suzuki, Japan) Work item assigned to WG 3: [ 06.32 ] WG 11 Daylight signalling lamps (Convenor Mrs. Maja Buntrock, Germany) Work item assigned to WG 11: [ 06.33 ] Working project: Revision work of ISO 8729:1997, Ships and marine technology – Marine radar reflectors - Part 1: Passive type (ISO 8729-1) [ 06.07R ] (Project leader: Prof. Shogo Hayashi, Japan) - Part 2: Active type (ISO 8729-2) [ 06.07R ] (Project leader: Mr. Peter Munro, UK) ISO 10596, Marine Wind Vanes and Anemometers [ 06.34 ] (Project leader: Dr. T. Hanafusa) Ad-hoc group: Gyro-compass and THD interface to Radar [ 06.06 ] [ 06.16 ] [ 06.22 ] [ 06.22C ] [ 06.28 ] [ 06.28C ] [ 06.29 ] [ 06.29C ] (The participating countries: China, Germany, US, Japan) Any other matters of importance to ISO/TC 8:

Navigation Light standard, ISO 16180 There was a vote on item 3rdDIS from November 9, 2006 to January 9, 2007. As a result, ISO 16180 will advance to FDIS stage. On the other hand, the regulation of the navigation light was created by IMO/NAV53. The value of this regulation is based on EN 14744 “Inland navigation vessels and sea-going vessels – Navigation light”.

53rd IMO/NAV

The chairman of SC 6, as the ISO representative, attended the 53rd IMO/NAV held from 23rd to 27thJuly 2007.

Liaisons: IEC/TC80, CIRM, IALA, IMO(NAV), ITU, ITN, WSC Published standards: 33 including 5 technical corrigendum [ 06.01 ] ISO 449:1997, Ships and marine technology - Magnetic compasses, binnacles and

azimuth reading devices - Class A ( Stage 90.92 )

ISO/TC8 N1000 R12 Status report page 26 [ 06.02 ] ISO 613:2000, Ships and marine technology - Magnetic compasses, binnacles and

azimuth reading devices - Class B ( Stage 90.93 ) [ 06.03 ] ISO 694:2000, Ships and marine technology - Positioning of magnetic compasses in

ships ( Stage 90.93 ) [ 06.04 ] ISO 1069:1973, Magnetic compasses and binnacles for sea navigation - Vocabulary ( Stage 90.93 ) [ 06.05 ] ISO 2269:1992, Shipbuilding - Class A magnetic compasses, azimuth reading devices

and binnacles - Tests and certification ( Stage 90.92 )

New [ 06.36 ] ISO 8468:2007, Ships and marine technology - Ship’s bridge layout and associated equipment - Requirements and guidelines

( Transferred from SC5 (05.01) on 2006-10-17, IMO-link-NR 15, 84, Stage 60.60, Published on 2007-07-15 )

[ 06.06 ] ISO 8728:1997, Ships and marine technology - Marine gyro-compasses ( IMO-link-NR 10, Stage 90.20 ) [ 06.07 ] ISO 8729:1997, Ships and marine technology - Marine radar reflectors ( IMO-link-NR 11, Stage 90.92 ) [ 06.08 ] ISO 9875:2000, Ships and marine technology - Marine echo-sounding equipment ( IMO-link-NR 06, Stage 90.93 ) [06.08C] ISO 9875:2000/Cor1:2006, Ships and marine technology - Marine echo-sounding

equipment - Technical corrigendum1 ( IMO-link-NR 06, Stage 60.60 ) [ 06.09 ] ISO 9876:1997, Ships and marine technology - Marine facsimile receivers for

meteorological charts ( Stage 90.20 ) [ 06.10 ] ISO 10316:1990, Shipbuilding - Class B magnetic compasses - Tests and certification ( Stage 90.93 ) [ 06.11 ] ISO 11606:2000, Ships and marine technology - Marine electromagnetic compasses ( IMO-link-NR 05 Stage 90.93 ) [06.11C] ISO 11606:2000/Cor1:2005, Ships and marine technology - Marine electromagnetic

compasses - Technical corrigendum1 ( IMO-link-NR 05 Stage 60.60 ) [ 06.12 ] ISO 11674:2006, Ships and marine technology - Heading control systems ( IMO-link-NR 01, Stage 60.60 ) [ 06.19 ] ISO 16273:2003, Ships and marine technology - Night vision equipment for high-speed

craft - Operational and performance requirements, methods of testing and required test results

( IMO-link-NR 39, Stage 60.60 ) [ 06.16 ] ISO 16328:2001, Ships and marine technology - Gyro-compasses for high-speed craft ( IMO-link-NR 10, 39, 48, Stage 90.60, Joint work with IEC/TC80 ) [ 06.15 ] ISO 16329:2003, Ships and marine technology - Heading control systems for high-speed

craft ( IMO-link-NR 39, 47 Stage 60.60, Joint work with IEC/TC80 ) [ 06.21 ] ISO 17884:2004, Ships and marine technology - Navigation - Searchlights for high speed

craft ( IMO-Link-NR 39 Stage 60.60 ) [ 06.40 ] ISO 17899:2004, Ships and marine technology - Marine electric window wipers ( Transferred from SC5 (05.05) on 2006-10-17, Stage 90.20 ) [ 06.20 ] ISO 19379:2003, Ships and marine technology - ECS databases - Content, quality,

updating and testing ( Stage 60.60 ) New [ 06.30 ] ISO 20672:2007, Ships and marine technology - Rate of turn indicators ( IMO-link-NR 67, Stage 60.60, Published on 2007-05-15 ) New [ 06.26 ] ISO 20673:2007, Ships and marine technology - Electric rudder angle indicators ( IMO-link-NR 67, Stage 60.60, Published on 2007-05-15 ) [ 06.22 ] ISO 22090-1:2002, Ships and marine technology - Transmitting heading devices (THDs)

- Part 1: Gyro-compasses ( IMO-Link-NR 66 Stage 90.20 ) [06.22C] ISO 22090-1:2002/Cor1:2005, Ships and marine technology - Transmitting heading

devices (THDs) - Part 1: Gyro-compasses - Technical corrigendum1


page 27 ( IMO-link-NR 66 Stage 60.60 ) [ 06.28 ] ISO 22090-2:2004, Ships and marine technology - Transmitting Heading Devices

(THDs) - Part 2 : Geomagnetic principles ( IMO-link-NR 66, Stage 90.60 ) [06.28C] ISO 22090-2:2004/Cor1:2005, Ships and marine technology - Transmitting Heading

Devices(THDs) - Part2: Geomagnetic principles - Technical corrigendum1 ( IMO-link-NR 66, Stage 90.60 ) [ 06.29 ] ISO 22090-3:2004, Ships and marine technology - Transmitting Heading Devices

(THDs) - Part 3: GNSS principles ( IMO-link-NR 66, Stage 60.60 ) [06.29C] ISO 22090-3:2004/Cor1:2005, Ships and marine technology-Transmitting Heading Devices(THDs) - Part 3: GNSS principles - Technical corrigendum1 ( IMO-link-NR 66, Stage 60.60) [ 06.35 ] ISO 22472:2006, Ships and marine technology - Guideline for the operation and

installation of voyage data recorder (VDR) ( IMO-link-NR 70, Stage 60.60 ) New [ 06.27 ] ISO 22554:2007, Ships and marine technology - Propeller shaft revolution indicators -

Electric type and electronic type ( IMO-link-NR 67, Stage 60.60, Published on 2007-09-15 ) New [ 06.31 ] ISO 22555:2007, Ships and marine technology - Propeller pitch indicators ( IMO-link-NR 67, Stage 60.60, Published on 2007-09-15 ) [ 06.18 ] IEC 62065:2002, Maritimes navigation and radio communication equipment and systems

- Track control systems - Operational and performance requirements methods of testing and required test results

( IMO-link-NR 59, Stage 60.60, work undertaken by IEC/TC80/WG1 ) Registered Work items: 5 including 2 revisions Approval Stage: 1 [ 06.33 ] PRF 25861, Ships and marine technology - Navigation - Daylight signaling lamps ( IMO-Link-NR 89, Stage 50.00, IS-2008-02-28 ) Enquiry Stage: 0 Committee Stage: 1 [ 06.32 ] CD 25862, Ships and marine technology - Marine magnetic compasses, azimuth reading

devices and binnacles for steering ( Stage 30.20, Under CD vote from 2007-09-14 to 2007-12-14, Original Target Day: CD-2006-03-31 DIS-2007-03-31 FDIS-2007-12-31 IS-2008-03-31, Extension Target Day (Under vote by ISO/TMB): CD-2007-03-31 DIS-2008-03-31 FDIS-2008-12-31 IS-2009-03-31 )

Preparatory Stage: 3 [ 06.07R ] WD 8729-1, Ships and marine technology - Marine radar reflectors - Part 1: Passive type

( Revision of ISO 8729:1997 ) ( IMO-link-NR 11, Stage 20.20, Original Target Day: CD-2007-01-31, DIS-2008-01-31, FDIS-2008-10-31, IS-2009-01-31 )

[ 06.07R ] WD 8729-2, Ships and marine technology - Marine radar reflectors - Part 2: Active type (Revision of ISO 8729:1997)

( IMO-link-NR 11, Stage 20.20, Original Target Day: CD-2007-01-31, DIS-2008-01-31, FDIS-2008-10-31, IS-2009-01-31 )

[ 06.34 ] WD 10596, Ships and marine technology - Marine wind vane and anemometers ( IMO-Link-NR 90, Stage 20.00, Original Target Day: CD-2007-07-31,

DIS-2008-07-31, FDIS-2009-04-31, IS-2009-07-31 ) Possible new work items: 3 Proposal Stage: 1 [ 06.41 ] PWI Ships and marine technology - Sound reception systems

( Transferred from SC 5 on 2006-10-17, IMO-link-NR 85, Stage 20.00 )

ISO/TC8 N1000 R12 Status report page 28 Preliminary Stage: 2 [ 06.38 ] PWI Electronically generated field of vision

( Transferred from SC 5 (05.03) on 2006-10-17, IMO-link-NR 60, Stage 00.00 ) [ 06.39 ] PWI Bridge watch alarm, central alarms and alarm management

( Transferred from SC5 (05.04) on 2006-10-17, IMO-link-NR 61, Stage 00.00 ) Deleted item: 1 [ 06.37 ] ISO 14612:2004 Ships and marine technology - Ship's bridge layout and associated

equipment - Requirements and guidelines for centralized and integrated bridge functions ( Transferred from SC5 (05.04) on 2006-10-17, IMO-link-NR 15, 84, ISO

14612:2004 was unified to ISO 8468:2007 )


page 29 ISO/TC 8/SC 7 Inland navigation vessels Chairman: Mr. Yuri N. Rumiantsev (Russian Federation) (1997 - 2008) Secretariat: Mr. Vladimir Y. Beylinson (Research Institute for Standardization and Certification "Lot" ) Scope: Standardization of general issues, principal requirements, design elements, equipment and technology in the field of inland navigation vessels, including shipborne barges and dredging equipment SC 7 Meetings: No future meetings planned Working Groups: none Any other matters of importance to ISO/TC 8 :

Concerning the collaboration with CEN/TC 15. According to agreement between CEN/TC 15 and ISO/TC 8 adoption of EN 14744 has been proposed as NWI.

Liaisons: ISO/TC 188, IEC/TC 18, CEN/TC 15, CCR, CD, CIPA, IADC, UN/ECE, IACS Published standards: 44 [ 07.01 ] ISO 21:1985, Shipbuilding - Inland navigation - Cable-lifters for stud-link anchor chains ( Stage 60.60, reconfirmed in 2005 ) [ 07.03 ] ISO 3652:1975, Shipbuilding - Inland vessels - Rope reels ( Stage 60.60, reconfirmed in 2005 ) [ 07.04 ] ISO 3674:1976, Shipbuilding - Inland vessels - Deck rail ( Stage 90.93 reconfirmed in 2007 ) [ 07.05 ] ISO 3786:1975, Shipbuilding - Inland navigation vessels towing hooks - Scale of tractive

efforts ( Stage 60.60, reconfirmed in 2005 ) [ 07.06 ] ISO 3876:1986, Shipbuilding - Inland vessels - Hand-holes ( Stage 90.93, reconfirmed 2007 ) [ 07.07 ] ISO 3913:1977, Shipbuilding - Welded steel bollards ( Stage 90.93, reconfirmed 2007 ) [ 07.07A ] ISO 3913Add1:1980 Addendum 1, Double bollards for inland navigation ( Stage 60.60, reconfirmed in 2005 ) [ 07.08 ] ISO 3926:1980, Shipbuilding - Inland navigation - Couplings for oil and fuel reception -

Mating dimensions ( Stage 60.60, reconfirmed in 2005 ) [ 07.09 ] ISO 3935:1977, Shipbuilding - Inland navigation - Fire-fighting water system - Pressures ( Stage 90.93, reconfirmed in 2007 ) [ 07.10 ] ISO 3948:1977, Shipbuilding - Inland vessels - Compressed-air systems - Pressure

ranges ( Stage 90.20, in review ) [ 07.11 ] ISO 3969:1979, Shipbuilding - Inland vessels - Operational documentation ( Stage 90.93, reconfirmed 2007 ) [ 07.12 ] ISO 4001:1977, Shipbuilding - Inland vessels - Raft-type life-saving apparatus ( Stage 90.93, reconfirmed 2007 ) [ 07.13 ] ISO 4050:1977, Shipbuilding - Inland vessels - "Rhine" and Hall's stockless anchors ( Stage 90.93, reconfirmed 2007 ) [ 07.14 ] ISO 4051:1977, Shipbuilding - Inland vessels - Steering gear - Values of torques ( Stage 60.60 reconfirmed in 2005 ) [ 07.15 ] ISO 4085:1979, Shipbuilding - Inland navigation - Swing derricks ( Stage 60.60 reconfirmed in 2005 ) [ 07.16 ] ISO 4089:1979, Shipbuilding - Inland navigation - Sealing rubber for covers of cargo

hatches ( Stage 60.60, reconfirmed in 2005 ) [ 07.17 ] ISO 4127-1:1979, Shipbuilding - Inland navigation - Fairleads - Part 1: Two-lip fairleads

ISO/TC8 N1000 R12 Status report page 30 ( Stage 60.60, reconfirmed in 2005 ) [ 07.18 ] ISO 4127-2:1980, Shipbuilding - Inland navigation - Fairleads - Part 2: Roller fairleads ( Stage 60.60, reconfirmed in 2005 ) [ 07.19 ] ISO 4143:1981, Shipbuilding - Inland navigation - Open rowing lifeboats ( Stage 90.93, reconfirmed in 2007 ) [ 07.20 ] ISO 4175:1979, Shipbuilding - Shipborne barges, series 1: Main dimensions ( Stage 60.60, reconfirmed in 2005 ) [ 07.21 ] ISO 5485:1986, Shipbuilding - Inland vessels - Fixed steel deck stairs ( Stage 90.93, reconfirmed in 2007 ) [ 07.22 ] ISO/TR 5987:1984, Inland navigation - Water fire-fighting system - Couplings of fire hoses - General technical requirements ( Stage 60.60 ) [ 07.23 ] ISO 6205:1988, Inland navigation vessels - Customs sealing systems - Basic technical

requirements ( Stage 60.60, reconfirmed in 2003 ) [ 07.24 ] ISO 6216:1980, Shipbuilding - Inland navigation - Pilot craft - Classification and basic

requirements ( Stage 60.60, reconfirmed in 2005 )

[ 07.25 ] ISO 6217:1982, Shipbuilding - Inland navigation - Pilot craft - Identification painting and inscriptions

( Stage 90.93, reconfirmed 2007 ) [ 07.26 ] ISO 6218:2005, Ships and marine technology - Inland navigation vessels - Manually

operated coupling devices for push tows-safety requirement and main dimensions ( Stage 60.60, published 2005-04 ) [ 07.27 ] ISO 6219:1983, Shipbuilding - Inland vessels - Windlasses and anchor capstans ( Stage 60.60, reconfirmed in 2003 ) [ 07.28 ] ISO 6764:1985, Shipbuilding – Ship- borne barges, series 1 - Lifting post casting -

Arrangement, dimensions and method of testing ( Stage 60.60, reconfirmed in 2005 ) [ 07.29 ] ISO 6765:1985, Shipbuilding – Ship- borne barges, series 3 - Main dimensions ( Stage 60.60, reconfirmed in 2005 ) [ 07.30 ] ISO 6766:1984, Shipbuilding – Ship- borne barges, series 4 - Main dimensions ( Stage 60.60, reconfirmed in 2005 ) [ 07.31 ] ISO 7221:1984, Shipbuilding and marine structures - Shipborne barges, series 1, on

barge carriers - Principal technical requirements ( Stage 60.60, reconfirmed in 2005 ) [ 07.32 ] ISO 7222:1985, Shipbuilding - Shipborne barges, series 2 - Main dimensions ( Stage 60.60, reconfirmed in 2005 ) [ 07.33 ] ISO 7236:1991, Inland navigation vessels - Demountable signal masts for push-tows -

Mounting attachment ( Stage 90.93, reconfirmed in 2007 ) [ 07.34 ] ISO 7255:1985, Shipbuilding - Active control units of ships - Vocabulary ( Stage 60.60, reconfirmed in 2005 ) [ 07.35 ] ISO 7545:1983, Shipbuilding and marine structures - Inland navigation - Single-lock

automatic couplings for push tows ( Stage 60.60, reconfirmed in 2003 ) [ 07.36 ] ISO 7606:1988, Shipbuilding - Inland navigation vessels - Draught scales ( Stage 60.60, reconfirmed in 2003 ) [ 07.37 ] ISO 7607:1984, Shipbuilding - Inland navigation - Multi-bucket dredgers - Scale of bucket

capacities ( Stage 60.60, reconfirmed in 2005 ) [ 07.38 ] ISO 7608:1985, Shipbuilding - Inland navigation - Couplings for disposal of oily mixture

and sewage water ( Stage 60.60, reconfirmed in 2005 ) [ 07.39 ] ISO 8303:1985, Shipbuilding - Shipborne barges, series 3 - Main operational and

technical requirements ( Stage 60.60, reconfirmed in 2005 ) [ 07.40 ] ISO 8304:1984, Shipbuilding - Shipborne barges, series 3 - Ventilation system - Principal

mating dimensions ( Stage 60.60, reconfirmed in 2005 ) [ 07.41 ] ISO 8384:2000, Ships and marine technology - Dredgers - Vocabulary ( Stage 60.60, reconfirmed in 2005 )


page 31 [ 07.42 ] ISO 8385:1999, Ships and marine technology - Dredgers - Classification ( Stage 60.60, reconfirmed in 2005 ) [ 07.43 ] ISO 9382:1990, Shipborne barges, all series - Classification and main requirements ( Stage 60.60, reconfirmed in 2005 ) [ 07.44 ] ISO 9437:1986, Shipbuilding - Inland vessels - Matrosov anchors ( Stage 90.93 reconfirmed in 2007 ) Work items under consideration: 1 Proposal Stage: 1 [ 07.45 ] PWI Inland navigation vessels – Navigation lights ( Stage 00.00, Adoption of EN 14744 ) Withdrawn standards: 2 [ 07.02 ] ISO 3372:1975, Shipbuilding – Inland vessels – Mushroom-type ventilator heads ( withdrawn in 2001, stage 95.99 ) [ 07.26 ] ISO 6218, Shipbuilding - Inland navigation – Coupling winches for push tows – main

dimensions ( withdrawn in 2005, replaced by [ 07.26 ] Shipbuilding - Inland navigation vessels – Manually operated coupling devices for push tows – Safety requirements and main dimensions )

ISO/TC8 N1000 R12 Status report page 32 ISO/TC 8/SC 8 Structures Chairman: Prof. Jeong Je Kim( Rep. of Korea) (2006 –2011) Secretary: Mr. Byeong Cheol Choi (KATS, Rep. of Korea) Scope: Standardization of design, construction and structural elements for ships and maritime installations for definition of interfaces and creation of interchangeability as well as for determination of safety requirements SC 8 Meetings: 1) 2002-10-21 Busan, Korea Rep. Of Working Group: WG3 Strength Assessment (Convener : Prof. Jeom Kee Paik, Korea) Work items assigned to WG 3 : [ 08.27 ], [ 08.28 ]

Participation: Belgium, China, Finland, France, India, Japan, Netherlands, Portugal, Republic of Korea, Singapore, Ukraine, UK, USA (Observer : IACS, Greece)

Any other matters of importance to ISO/TC8: Systematic review: 4

ISO 3797:1976 Shipbuilding - Vertical steel ladders Start Date: 2007-07-15, End Date: 2007-12-17 ISO 5779:1987 Shipbuilding - Ordinary rectangular windows – Positioning Start Date: 2007-07-15, End Date: 2007-12-17 ISO 5797:2004 Ships and marine technology - Windows and side scuttles for fire-resistant constructions Start Date: 2007-07-15, End Date: 2007-12-17 ISO 21005:2004 Ships and marine technology - Thermally toughened safety-glass panes for windows and side scuttles Start Date: 2007-07-15, End Date: 2007-12-17

Liaisons: IMO, IACS, ITN, ISO/TC35, ISO/TC67/SC7, ISO/TC108, ISO/TC156 Published standards: 21 [ 08.01 ] ISO 614:1989, Shipbuilding and marine structures - Toughened safety glass panes for

rectangular windows and side scuttles - Punch method of non-destructive strength testing ( Stage 90.93, 3rd edition, confirmed 2004 ) [ 08.03 ] ISO 1751:1993, Shipbuilding and marine structures - Ships' side scuttles (Stage 90.93, 2nd edition, confirmed 2003) [ 08.05 ] ISO 3434:1992, Shipbuilding and marine structures - Heated glass panes for ships'

rectangular windows ( Stage 90.93, 2nd edition ) [ 08.05A ] ISO 3434:1992/Amd 1:2004, Shipbuilding and marine structures - Heated glass panes

for ships' rectangular windows – Amendment 1 ( Stage 60.60, Published on 2004-06-28 ) [ 08.06 ] ISO 3796:1999, Ships and marine technology - Clear openings for external single-leaf

doors ( Stage 90.93, 2nd edition, confirmed 2004, CEN/TC300 EN ISO 3796: 2001 ) [ 08.07 ] ISO 3797:1976, Shipbuilding - Vertical steel ladders ( Stage 90.93, confirmed 2002, taken over from SC 4 ) [ 08.08 ] ISO 3902:1990, Shipbuilding and marine structures - Gaskets for rectangular windows

and side scuttles ( Stage 90.93, 2nd edition, confirmed 2005 ) [ 08.09 ] ISO 3903:1993, Shipbuilding and marine structures - Ships' ordinary rectangular windows ( Stage 90.93, 2nd edition, confirmed 2003 ) [ 08.10 ] ISO 3904:1990, Shipbuilding and marine structures - Clear-view screens ( Stage 90.93, 2nd edition, confirmed 2005 ) [ 08.11 ] ISO 5480:1979, Shipbuilding - Guard rails for cargo ships


page 33 ( Stage 90.93, confirmed 2005 ) [ 08.12 ] ISO 5778:1998, Ships and marine technology - Small weathertight steel hatches

( Stage 90.93, IMO-link-NR 40, 2nd edition, confirmed 2003, CEN/TC300: EN ISO 5778:2000 )

[ 08.13 ] ISO 5779:1987, Shipbuilding - Ordinary rectangular windows - Positioning ( Stage 90.93, confirmed 2002 ) [ 08.14 ] ISO 5780:1987, Shipbuilding - Side scuttles - Positioning ( Stage 90.93, confirmed 2002 )

[ 08.16 ] ISO 5894:1999, Ships and marine technology - Manholes with bolted covers ( Stage 90.93, 2nd edition, confirmed 2004 )

[ 08.17 ] ISO 6042:1998, Ships and marine technology - Weathertight single-leaf steel doors ( Stage 90.93, IMO-link-NR 53, 2nd edition, confirmed 2003, CEN/TC300: EN ISO 6042:2000 )

[ 08.18 ] ISO 6345:1990, Shipbuilding and marine structures - Windows and side scuttles – Vocabulary

( Stage 90.93, confirmed 2005 ) [ 08.19 ] ISO 9519:1990, Shipbuilding and marine structures - Rungs for dog-step ladders

( Stage 90.93, EN 29519:1994, CEN/TC15, confirmed 2002, taken over from SC4 ) [ 08.20 ] ISO 15401:2000, Ships and marine technology - Bulk carriers – Construction quality of

hull structure ( Stage 90.93, IMO-link-NR 03, confirmed 2005 )

[ 08.21 ] ISO 15402:2000, Ships and marine technology - Bulk carriers - Repair quality of hull structure

( Stage 90.93, IMO-link-NR 03, confirmed 2005 ) [ 08.22 ] ISO 5797:2004, Ships and marine technology - Windows and side scuttles for

fire-resistant constructions ( Stage 60.60, IMO-link-NR 08, Published on 2004-07-30 )

[ 08.25 ] ISO 21005:2004, Ships and marine technology – Thermally toughened safety glass panes for windows and side scuttles

( Stage 60.60, Published on 2004-09-24 ) Registered Work items: 2 Enquiry Stage: 1

[ 08.27 ] FDIS 18072-1, Ships and marine technology - Ship Structures – Part 1: General requirements for their limit state assessment

( WG3, Stage 50.20, FDIS Ballot, Start Date: 2007-08-15, End Date: 2007-10-15 FDIS was submitted to ISO/CS on 2006-11-29 transferred from [02.27] )

Committee Stage: 1

[ 08.28 ] CD 18072-2, Ships and marine technology - Ship Structures – Part 2 : Requirements for their ultimate limit state assessment

( WG3, stage 30.98, CD voting was closed 2005-08-31, CD was approved, transferred from [ 02.27 ] )

Before the ISO/TC8/AG meeting in October 2006 target date: DIS : 2006-11-30, FDIS : 2007-02-28, IS : 2007-08-31, at the ISO/TC8/AG meeting in October 2006 approved target date: DIS : 2007-11-30, FDIS : 2008-02-28, IS : 2008-08-31 at the ISO/TC8/AG meeting in June 2007 approved target date: DIS : 2007-11-30, FDIS : 2008-11-30, IS : 2009-05-31, Even though Target Date of DIS was approved to 2007-11-30 at AG meeting in October 2006, ISO/CS

cancelled this item on 2007-02-05. After AG meeting in June 2007, TC8 Secretary requested ISO/CS to revive this item with Approved Target

Dates, but there is no reply until now from ISO/CS. The target dates need to be updated at ISO/CS.


Justification: WG3 Convener requested the revised target date for Part 2. There are more than 70 numerical formulas, and it is difficult to verify them numerically and experimentally, so

he says he needs more time to develop this work item. The revised target date which was approved at AG meeting should be updated at ISO/CS database.

Possible new work items: 5 Proposal Stage: 0 Preliminary Stage: 5

[ 08.23 ] Hull stress monitoring systems (HSMS/ Voyage data recorder) ( IMO-link-NR 32, Stage 00.00, transferred from [ 10.18 ] )

[ 08.24 ] Corrosion protection systems for seawater ballast tanks ( IMO-link-NR 34, Stage 00.00 )

[ 08.26 ] Composite materials ( Stage 00.00 transferred from [ 01.20 ] )

[ 08.29 ] Ship structures - Part 3: Requirements for their fatigue limit state assessment ( Stage 00.00 )

[ 08.30 ] Ship structures – Part 4: Requirements for their accidental limit state assessment ( Stage 00.00 )

Deleted Items: 3

[ 08.02 ] ISO 1095:1989, Shipbuilding and marine structures - Toughened safety glass panes for

side scuttles ( Stage 95.99, ISO 1095 was merged into ISO 21005 )

[ 08.04 ] ISO 3254:1989, Shipbuilding and marine structures - Toughened safety glass panes for rectangular windows

( Stage 95.99, ISO 3254 was merged into ISO 21005 ) [ 08.15 ] ISO 5797-1:1989, Shipbuilding and marine structures - Windows and side scuttles for fire

resistant constructions - Specifications - Part 1: "B" class divisions ( Stage 95.99, ISO 5797-1:1989 was merged into ISO 5797:2004 )


page 35 ISO/TC 8/SC 9 General requirements Chairman: Mr. Tsuyoshi Yahagi (Japan) (2005 - 2010) Secretariat: Mr. Yoshihito Tominaga (JISC/JSTRA) Scope: Investigate, develop and maintain standard specifications, test methods, definitions and practices for the design, construction and repair of marine vessels, shipboard quality assurance, human factors, management systems, regulatory requirements, technical data management. SC 9 Meetings: 1) 1999-10-19 Tokyo, Japan 2) 2004-10-18 Dalian, China 3) 2006-10-16 Hamburg, Germany Working groups: No setting Liaisons: CEN/TC300, IACS, ITN, WSC Published standards: 9 [ 09.01 ] ISO 1964:1987, Shipbuilding - Indication of details on the general arrangement plans of

ships ( Stage 90.20 ) [ 09.02 ] ISO 2412:1982, Shipbuilding - Colours of indicator lights ( IMO-link-NR 07, 23, 58, Stage 60.60 ) [ 09.08 ] ISO 6050:1987, Shipbuilding - Bulbous bow and side thruster symbols ( Stage 90.20 ) [ 09.09 ] ISO/TR 13298:1998, Ships and marine technology - Vocabulary of general terms ( Stage 60.60 ) [ 09.10 ] ISO 15016:2002, Ships and marine technology - General requirement - Guidelines for the

assessment of speed and power performance by means of sea trial data ( Stage 90.20 ) [ 09.11 ] ISO 15583:2005, Ships and marine technology - Maritime standards list ( Stage 60.60 ) [ 09.23 ] ISO 17357:2002, Ships and marine technology - High - pressure floating pneumatic

rubber fenders ( Stage 60.60 ) [ 09.24 ] ISO 19018:2004, Ships and marine technology - Terms, abbreviations and graphical

symbols and concepts on navigation ( Stage 90.60 ) [ 09.25 ] ISO 19019:2005, Ships and marine technology - Guide for planning, carrying out and

reporting sea trials ( Stage 60.60 ) Possible new work items: 10 Proposal Stage: 2 New [ 09.13 ] NP Ships and marine technology- Standards for manoeuvrability ( IMO-link-NR 50, Stage 10.00 ) New [ 09.29 ] NP Ships and marine technology- Coating standard ( IMO-Link-NR 34, 87, Link with [ 08.24 ], Stage 10.00 ) Preliminary Stage: 4 [ 09.15 ] PWI Ships and marine technology- Wing In Ground (WIG) Craft ( IMO-Link-NR 31, Stage 00.00 ) [ 09.16 ] PWI Ships and marine technology- Combined pusher tug-barge safety standards ( IMO-link-NR 35, Stage 00.00 )

ISO/TC8 N1000 R12 Status report page 36 [ 09.17 ] PWI Ships and marine technology- Guidelines for the design, construction and operation

of passenger submersible craft ( IMO-link-NR 36, Stage 00.00 ) [ 09.21 ] PWI Ships and marine technology- Compendium of definitions on watertight, weather-

tight, splash-tight, dust-tight, gastight, vacuum-tight etc. ( Stage 00.00 ) Items transferred to another Subcommittee: 4 [ 09.18 ] PWI Ships and marine technology- Standards related to High Speed Craft (HSC) ( under discussion within SC 6 ) [ 09.19 ] PWI Ships and marine technology- Standards on Ro/Ro ferry safety ( transferred to SC 1, IMO-Link-NR 41, Stage 00.00 ) [ 09.22 ] PWI Ships and marine technology- Engine room arrangements, including human factors ( transferred to SC3 ) [ 09.27 ] PWI Ships and marine technology- Guidelines for maintenance and monitoring of

on-board materials containing asbestos ( transferred to TC 8/WG 1, IMO/DE 42, Report paragraph number 6.12 )


page 37 ISO/TC 8/SC 10 Computer applications Chairman: Mr. Ørnulf Jan Rødseth (Norway) (2002 –2008 ) Secretariat: Mr. Jan Frank Ulvås (SN) Scope: Standardization in the field of computer applications in shipbuilding and the operation of ships. SC 10 Meetings: 1) 1997-10-20 Hamburg, Germany 2) 1998-10-11 Maldon, U.K. 3) 1999-10-17 Tokyo, Japan 4) 2000-01-20 Corresponding meeting 5) 2001-11-30 Corresponding meeting Working Groups: 4 WG 3 General Principle for the development and use of programmable electronic systems in marine applications (convener Mr. Jonathan Earthy, UK) Work items assigned to WG 3: [ 10.14 ] WG 4 Shipboard Loading Instruments (convener Mr. H.J. Koelman, The Netherlands) Work items assigned to WG4: [ 10.15 ] WG 5 Data transfer standard for maritime, intermodal transportation and security (convener Mr. Eugene D. Story, USA) Work items assigned to WG5: [ 10.17 ] WG 6 Electronic Port Clearance (convener Mr. Ørnulf Jan Rodseth, Norway) Work items assigned to WG6: [ 10. 22 ] Published standards: 17 including 2 PAS [ 10.01 ] ISO 5572:1987, Shipbuilding and marine structures - Numbering of equipment and

structural elements in ships ( Stage 90.93 ) [ 10.02 ] ISO 6582:1983, Shipbuilding - Numerical control of machines - ESSI format ( Stage 90.93 ) [ 10.03 ] ISO 7460:1983, Shipbuilding - Shiplines - Identification of geometric data ( Stage 90.93 ) [ 10.04 ] ISO 7461:1984, Shipbuilding - Shiplines - Numerical representation of elements of the

hull geometry ( Stage 90.93 ) [ 10.05 ] ISO 7462:1985, Shipbuilding - Principal ship dimensions - Terminology and definitions for

computer applications ( Stage 90.93 ) [ 10.07 ] ISO 7838:1984, Shipbuilding - Shiplines - Formats and data organization ( Stage 90.93 ) [ 10.08 ] ISO 8193:1984, Shipbuilding - Shell plating information ( Stage 90.93 ) [ 10.09 ] ISO 8277:1988, Shipbuilding - Pipework - Information transfer ( Stage 90.93 ) [ 10.10 ] ISO 9203-1:1989, Shipbuilding - Topology of ship hull structure elements - Part 1:

Location of elements ( Stage 60.60 ) [ 10.11 ] ISO 9203-2:1989, Shipbuilding - Topology of ship hull structure elements - Part 2:

Description of elements ( Stage 90.20 ) [ 10.12 ] ISO 9203-3:1989, Shipbuilding - Topology of ship hull structure elements - Part 3:


Relations of elements ( Stage 90.20 ) [ 10.16 ] ISO 15849:2001, Ships and marine technology - Guidelines for implementation of a fleet

management system network ( IMO-link-NR 51, Stage 60.60 ) [ 10.21 ] ISO 15849 Amd1:2003, Ships and marine technology - Guidelines for implementation of

a fleet management system network AMENDMENT 1 ( IMO-link-NR 51, Stage 60.60, Published in 2003-08-26 ) New [ 10.15 ] ISO 16155:2006, Ships and marine technology - Shipboard loading instrument ( Stage 60.60, Published on 2006-04 ) [ 10.17 ] ISO PAS 16917:2002, Ships and marine technology - Data transfer standard for maritime

and intermodal transportation ( IMO-link-NR 51, Stage 60.60, ISO PAS published 2002-12 ) [ 10.14 ] ISO 17894:2005, Ships and marine technology - Computer applications - General

principles for the development and use of programmable electronic systems in marine applications

( DIS-2004-02-16, Stage 60.60 ) [ 10.21P ] ISO/PAS 22853:2005, Ships and marine technology - computer applications,

specifications MSML (Marine Safety Mark-up Language) ( Stage 60.60, Published on 2005-10 ) Registered Work items: 1 Approved Stage: 0 Preparatory stage: 1 New [ 10.22 ] AWI 28005, Ships and marine technology - Electronic port clearance (EPC) ( IMO-Link-NR 88, Stage 20.00 ) Possible new work items: 2 Proposal Stage: 2 [ 10.19 ] NP Ships and marine technology - Ship safety record ( Stage 10.00 ) [ 10.20 ] NP Ships and marine technology - Safety in shipping and environmentally friendly

shipping ( Stage 10.00 ) Items for proposed to cancellation: 2 [ 10.19 ] NP Ships and marine technology - Ship safety record ( Stage 10.00, merged with PAS22853 ) [ 10.20 ] NP Ships and marine technology - Safety in shipping and environmentally friendly

shipping ( Stage 10.00 )


page 39 ISO/TC 8/SC 11 Intermodal and short sea shipping Chairman: Prof. Jae Wook Lee (Korea Rep. of) (2006-2011) Secretariat: Ms Luz Smith Rodriguez (AENOR) Scope: Standardization of general issues; principal requirements; design, construction and operation of ships and equipment; technology for intermodal, including ship/port interface and other modes of transportation, and short sea shipping. SC 11 Meetings: 1) 2007-10-30 Santa Cruz de Tenerife, Spain Working Groups: WG 1 Marine Port Facility Security Assessments and Security Plan Development (Convenor Mr. Steven O’Malley, USA) Work item assigned to WG 1: [ 11.03 ] WG 2 Best Practices for Supply Chain Security (Convenor Mr. Steven O’Malley, USA) Work item assigned to WG 1: [ 11.04 ] WG 2 meetings: 1) 2005-04-06/08 Madrid, Spain 2) 2005-07-11/13 Gamboa, Panama 3) 2005-09-12/14 Kobe, Japan 4) 2006-01-24/27 Brussels, Belgium Liaisons1: ISO/TC 22, ISO/TC 104, ISO/TC 145, ISO/TC 204, IAPH, WCO, WSC Published standards: 2 including 2 PAS [ 11.03P ] ISO PAS 20858:2004, Ships and marine technology - Marine port facility security

assessments and security plan development ( IMO-link-NR 69, Stage 60.60 ) [ 11.04P ] ISO PAS 28001:2006, Security management systems for the supply chain - Best

practices for implementing supply chain security-Assessments and plans ( IMO-Link-NR 69, Stage 60.60, Published on 2006-09-01 ) Registered Work items: 2 Inquiry Stage: 1 [ 11.03 ] ISO/DIS 20858, Ships and marine technology - Maritime port facility security

assessments and security plan development ( IMO-Link-NR 69, Stage 20.99 ) New [ 11.04 ] ISO/DIS 28001, Security management systems for the supply chain - Best Practices for

implementing supply chain security - Assessments and plans requirements and guidance ( IMO-link-NR 69, Stage 40.99 ) These two DIS have been approved without negative votes nor comments. They have been sent to ISO CS for theirdirect publication as IS (FDIS stage not necessary). ISO/TC 8/SC 11 is waiting for their publication. Preparatory Stage: 0 Possible new work items: 02 1 To be reviewed at the ISO/TC 8/SC 11 meeting. 2 Will be studied at the ISO/TC 8/SC 11 meeting.

ISO/TC8 N1000 R12 Status report page 40 ISO/TC 8/SC 12 Large Yachts Chairman: Mr. Luigi Scarpati (Italy) (2006 – 2011) Secretary: Mr. Emilio Tremolada (UNI, Italy) Scope: Standardization of equipment and construction details of Large Yachts: a pleasure vessel having a length of the hull 24 m and above. SC 12 Meetings: 1) 2007-03-26/27 Milan, Italy Working Groups: WG 1 Design criteria (Convenor NN) Work item assigned to WG 1: none WG 2 Safety and security (Convenor Mr David Ralph, U.K) Work items assigned to WG 2: [ 12.01 ], [ 12.03 ] WG 3 Deck equipment (Convenor Mr Edvino Algardi, Italy) Work item assigned to WG 3: [ 12.04 ] WG 4 Systems (Convenor NN) Work item assigned to WG 4: none WG 5 Quality (Convenor Mr Tom Marhevko, U.S.A.) Work item assigned to WG 5: [ 12.02 ] Liaisons: ICOMIA Registered Work Items: 4 Preparatory stage: 4 New [ 12.01 ] ISO AWI 11336, Ships and marine technology - Large yachts-Windows and port-lights -

Strength and water tightness ( Stage 20.00, this item transferred from SC1, [ 01.78 ] – Limit dates: CD: 2008-08-28, DIS: 2009-02-28, FDIS: 2010-02-28, IS: 2010-08-28 )

New [ 12.02 ] ISO AWI 11347, Ships and marine technology-Large yachts-Measurement and analysis of the visual appearance of coatings

( Stage 20.00, this item transferred from SC1, [ 01.79 ] – Limit dates: CD: 2008-08-28, DIS: 2009-02-28, FDIS: 2010-02-28, IS: 2010-08-28 )

New [ 12.03 ] ISO AWI 11208, Ships and marine technology - Large yachts-Windows and port-lights - Strength and water tightness

( Stage 20.00 Limit dates: CD: 2008-08-09, DIS: 2009-02-09, FDIS: 2010-02-09, IS: 2010-08-09)

New [ 12.04 ] ISO AWI 11209, Ships and marine technology - Large yachts-Windows and port-lights - Strength and water tightness

( Stage 20.00 Limit dates: CD: 2008-08-09, DIS: 2009-02-09, FDIS: 2010-02-09, IS: 2010-08-09 )


page 41

Annex A List of IMO-link-NR’s The first column gives the IMO-link-NR as used in this document. The second column contains the Title of the subject, the relevant IMO bodies and IMO Resolutions or other reference documents. IMO International Maritime Organization MSC Maritime Safety Committee FP Fire Protection DE Design and equipment NAV Safety of Navigation SLF Stability and Loadlines and Fishing vessels Safety COMS Radiocommunication and Search and Rescue MEPC Marine Environment Protection Committee BLG Bulk Liquids and Gases SOLAS 74 International Convention for the Safety of Life at Sea 1974, as amended LSA Code Life-saving Appliances Code FTP Code Fire Test Procedures Code FSS Code Fire Safety Systems Code ICG Code International Gas Carrier Code BCH Code International Bulk Chemical Code The last column refers to the internal ISO/TC 8 work item number. Further information on these work items can be found under the relevant subcommittee, indicated by the first two digits of the work item number e.g. [ 06.12 ] indicating Sub committee 6, item 12.

1 Heading control systems MSC/NAV A.210 (VII) A.342 (IX) A.694 (17) SOLAS 1974, II-1, Reg. 29 SOLAS 1974, II-1, Reg. 30 SOLAS 1981, V, Reg. 19

[ 06.12 ] ISO 11674:2006, Ships and marine technology - Heading control systems

2

Engine-room layout, design and arrangements MSC/DE (correspondence). Group, G.P. Miante, US Coast Guard) a. Colour coding of pipes; b. Circuit tagging; c. Alarms and indicators (see

IMO-link-NR 7, 23); d. Illumination levels e. Transport systems within the

engine-room; f. Escape routes.

[ 03.23 ] ISO 14726-1:1999, Ships and marine technology - Identification colours for the content of piping systems - Part 1: Main colours and media

[ 03.24 ] ISO 14726-2:2002, Ships and marine technology - Identification colours for the content of piping systems - Part 2: Additional colours for media and/or functions

[ 03.23R ] ISO/FDIS 14726, Ships and marine technology - Identification colours for the content of piping systems – Part 1: Main colours and media

3

Bulk carrier safety MSC/DE A.744 (18) A.789 (19) SOLAS II-I, Part B-2

[ 08.20 ] ISO 15401:2000, Ships and marine technology - Bulk carriers – Construction quality of hull structure [ 08.21 ] ISO 15402:2000, Ships and marine technology - Bulk carriers - Repair quality of hull structure

4 Global maritime distress and safety systems (GMDSS) COMSAR A.694 (17)


5 Marine electromagnetic compasses NAV, A.694 (17)

[ 06.11 ] ISO 11606:2000, Ships and marine technology - Marine electromagnetic compasses [06.11C] ISO 11606:2000/Cor1:2005, Ships and marine technology -

Marine electromagnetic compasses - Technical corrigendum1

6 Marine echo sounding equipment MSC/NAV, SOLAS 1981 V, Reg. 12 A.224 (VII) (in revision)

[ 06.08 ] ISO 9875:2000, Ships and marine technology - Marine echo-sounding equipment

[06.08C] ISO 9875:2000/Cor1:2006, Ships and marine technology - Marine echo-sounding equipment - Technical corrigendum1

7 Colours of indicator lights [ 09.02 ] ISO 2412:1982, Shipbuilding - Colours of indicator lights (see also IMO-Link-NR 23, 58)

8 Fire resistant constructions FP SOLAS 1974, Ch. II-2 FTP Code

[ 08.22 ] ISO 5797:2004, Ships and marine technology - Windows and side scuttles for fire-resistant constructions

9 Testing of lifesaving appliances DE SOLAS 1974, Ch. � Res. MSC.81 (70) LSA Code

[ 01.04 ] ISO/TR 6065:1991, Shipbuilding and marine structures - Inflatable liferafts - Materials

10 Marine gyro-compasses NAV SOLAS 1974, V A.424 (XI), A.694 (17)

[ 06.16 ] ISO 16328:2001, Ships and marine technology - Gyro-compasses for high-speed craft (see IMO-link-NR 39, 48)

11 Marine radar reflectors NAV A.384 (X), A.477 (XII) (in revision)

[ 06.07 ] ISO 8729:1997, Ships and marine technology - Marine radar reflectors

[ 06.07R ] WD 8729-1, Ships and marine technology - Marine radar reflectors - Part 1: Passive type ( Revision of ISO 8729:1997 )

[ 06.07R ] WD 8729-2, Ships and marine technology - Marine radar reflectors - Part 2: Active type ( Revision of ISO 8729:1997)

12 "deleted" "deleted" 13

Shipboard incinerators MEPC/DE MEPC.59 (33) (in revision) MEPC 38 DE 39, DE 40

[ 03.22 ] ISO 13617:2001, Ships and marine technology - Shipboard incinerators – Requirements

14

LSA symbols DE A.760 (18) Res. MSC, 82 (70) MSC/Circ. 1050

[ 01.08 ] ISO/TR 14564:1995, Shipbuilding and marine structures - Marking of escape routes

[ 01.22 ] ISO 17631:2002, Ships and marine technology - Shipboard plans for fire protection, life-saving appliances and means of escape (see IMO-link-NR 17)

[ 01.32 ] DIS 17338, Ships and marine technology - Drawings for fire protection - Indications of fire rating by divisions

15

Ergonomic design criteria for bridge equipment and lay-out NAV/correspondence group MSC/CIRC.566 SOLAS 5.

[ 06.36 ] ISO 8468:2007, Ships and marine technology - Ship’s bridge layout and associated equipment - Requirements and guidelines (see IMO-link-NR 84)

[ 06.37 ] ISO 14612:2004 Ships and marine technology - Ship's bridge layout and associated equipment - Requirements and guidelines for centralized and integrated bridge functions


page 43 16

Widths of escape stairways on passenger ships FP SOLAS 74, Ch. -2 FSS Code Res. 757 (18)

[ 01.34 ] PWI Width of escape stairways on passenger ships

17

Low location lighting on passenger ships FP SOLAS 1974, Ch. -2 FSS Code Res. A.752 (18) MSC.Cir699

[ 01.11 ] ISO 15370:2001, Ships and marine technology - Low-Location Lighting on passenger ships-Arrangement

[ 01.22 ] ISO 17631:2002, Ships and marine technology - Shipboard plans for fire protection, life-saving appliances and means of escape (see IMO-link-NR 14)

18

Equipment for life-saving appliances SOLAS 1974, Ch. � LSA Code

[ 01.35 ] ISO 18813:2006, Ships and marine technology - Survival equipment for survival crafts and rescue boats

19

Sprinkler systems FP, SOLAS 1974, Ch. �-2 FSS Code Res. A 800 (19)

20

Alternative arrangements for Halon fire-extinguishing systems in machinery spaces FP,SOLAS 1974, Ch. �-2 FSS Code MSC/Circ. 668 MSC/Circ. 728

[ 01.37 ] PWI Alternative sprinkler systems

21

Alternative tanker design guidelines MEPC/BLG, MEPC.66 (37) MARPOL 73/78, Annex 1, Reg. 13F (5)

[ 01.31 ] PWI Standard for approving Halon alternative agents and fire extinguishing systems

[ 02.01 ] Alternative tanker design guidelines

22

Prevention of air pollution from ships MEPC/correspondence group, Comm. K. Eldridge, US Coast Guard new annex to MARPOL 73/78

[ 02.08 ] Vapour recovery interest SC 3

23 Code on alarms and indicators MSC/DE A.686 (17), A.830 (19)

[ 09.02 ] ISO 2412:1982, Shipbuilding - Colours of indicator lights (see also IMO-Link-NR 7, 58)

24

Ventilation systems in ro-ro cargo spaces MSC

25

Ship sewage systems MSC MSC/Circ.648

[ 03.20 ] ISO 9785:2002, Ships and marine technology - Ventilation of cargo spaces where internal combustion engine vehicles may be driven - Calculation of theoretical total airflow required


26

Application of plastic pipes on ships DE A.753 (18)

[ 03.30 ] ISO 15749-1:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 1: Sanitary drainage-system design

[ 03.31 ] ISO 15749-2:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 2: Sanitary drainage, drain piping for gravity system

[ 03.32 ] ISO 15749-3:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 3: Sanitary drainage, drain piping for vacuum systems

[ 03.33 ] ISO 15749-4:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes

[ 03.34 ] ISO 15749-5:2004, Ships and marine technology - Drainage systems on ships and marine structures - Part 5: Drainage of decks, cargo spaces and swimming pools

27

Guidelines for the on-board use of composite materials MSC/FP

[ 03.40 ] ISO 15840:2004, Ships and marine technology - Standard specification for Thermosetting resin fiberglass pipe and fittings to be used for marine applications

28

Anchoring systems for MODU DE

29 Requirements for safety assessment/risk analysis for offshore oil and gas exploration and exploitation industries DC

[ 04.25 ] NP 13819, Petroleum and natural gas industries-Offshore structures – Part 4: Floatingstructures

30

Guidelines for the on board use and application of computers DE

31

Interim Guidelines for wing-in- Ground craft MSC/Cir.1054

[ 09.15 ] PWI Ships and marine technology - Wing In Ground (WIG) Craft

32

Hull stress monitoring system MSC/DE, MSC/Circ.646

[ 08.23 ] Hull stress monitoring systems (HSMS/ Voyage data recorder)

33

Pressure/vacuum relief valves FP, BLG, MSC/Circ.677 Amended MSC/Circ.1002

[ 03.25R ] ISO/FDIS 15364, Ships and marine technology - Pressure/vacuum valves for cargo tanks

[ 03.44 ] ISO/CD 28521, Ships and marine technology – Hydraulic oil systems – Guidance for grades of cleanliness and flushing

34

Guidelines for the selection ,application and maintenance of corrosion prevention systems of seawater ballast tanks A.798(19) (draft) concerning corrosion prevention of dedicated seawater ballast tanks of new oil tankers and bulk SOLAS Reg. II-1/14-1

[ 03.25 ] ISO 15364:2000, Ships and marine technology - Pressure/vacuum valves for cargo tanks

[ 08.24 ] Corrosion protection systems for seawater ballast tanks [ 09.29 ] NP Ships and marine technology- Coating standard (see

IMO-link-NR 87)

35

Guidelines for the application safety standards to pusher tug-barge MSC/Cir.866

[ 09.16 ] PWI Ships and marine technology - Combined pusher tug-barge safety standards

36

Guidelines for the design, construction and operation of passenger submersible craft MSC/Cir.981

[ 09.17 ] PWI Ships and marine technology- Guidelines for the design, construction and operation of passenger submersible craft

37

Design and operation of passenger ships to the needs of elderly and disabled persons DE


page 45 38

Guidelines for safe ocean towing DE/correspondence group

[ 01.38 ] PWI Design and operation of passenger ships to the needs of elderly and disabled persons

[ 01.40 ] PWI Risk analysis of escape routes 39

High speed craft (HSC) Code , see NR 47 and NR 49 MSC/DE SOLAS, X. MSC.36 (63) MSC.44 (65) MSC.45 (65) MSC/Circ.687

[ 04.27 ] Guidelines for safe ocean towing [ 06.16 ] ISO 16328:2001, Ships and marine technology -

Gyro-compasses for high-speed craft (see IMO-link-NR 10, 48)

[ 06.19 ] ISO 16273:2003, Ships and marine technology - Night vision equipment for high-speed craft - Operational and performance requirements, methods of testing and required test results

[ 06.15 ] ISO 16329:2003, Ships and marine technology - Heading control systems for high-speed craft (see IMO-link-NR 47)

[ 06.21 ] ISO 17884:2004, Ships and marine technology - Navigation - Searchlights for high speed craft

40

Intact stability of double hull tankers SLF, MARPOL 73/78, Annex I, Reg. 25A

[ 08.12 ] ISO 5778:1998, Ships and marine technology - Small weathertight steel hatches

41

Ro-Ro ferry safety SLF, 1995 SOLAS CONF.3/46, res. 14 A.794 (19)

[ 09.19 ] PWI Ships and marine technology- Standards on Ro/Ro ferry safety

42

Pilot transfer arrangements NAV A.667(16) MSC/CIRC.568 RW1 SOLAS V Reg. 17

non

43 Application of computers in determining ship stability MSC/SLF

[ 01.33 ] PRF 16848, Ships and marine technology - Pilot accommodation ladders

[ 01.01 ] ISO 799:2004, Shipbuilding - Pilot ladders [ 01.02 ] ISO 5488:1979, Shipbuilding - Accommodation ladders

44 Guidelines for the application of systems protecting grease producing cooking equipment SOLAS 1974 II-2, FSS Code

45 Fire resistance of hose assemblies DE/FP

46 [ 01.12 ] ISO 15371:2000, Ships and marine technology - Fire extinguishing systems for protection of galley deep frying equipment - Fire tests

47 Automatic pilots for HSC, see also NR 40 A.822 (19)

[ 03.26 ] ISO 15540:1999, Ships and marine technology - Fire resistance of hose assemblies - Test methods

[ 03.67 ] ISO 15540 Cor1:1999, Ships and marine technology - Fire resistance of hose assemblies - Test methods TECHNICAL CORRIGENDUM 1

[ 03.27 ] ISO 15541:1999, Ships and marine technology - Fire resistance of hose assemblies - Requirements on the test bench

[ 06.15 ] ISO 16329:2003, Ships and marine technology - Heading control systems for high-speed craft (see IMO-link-NR 39)

48 Gyro compasses for HSC, see also NR 40 A.821 (19)

[ 06.16 ] ISO 16328:2001, Ships and marine technology - Gyro-compasses for high-speed craft (see IMO-link-NR 10, 39)

49 Testing of life saving appliances

(see NR 19 and 53) A.689 (17) SOLAS 1974, 1983


50 Ship manoeuvrability A.751 (18) Explanatory notes to the standards for ship manoeuvrability MSC/Cir.1053

[ 09.13 ] NP Ships and marine technology- Standards for manoeuvrability

51 Fleet management systems MSC

[ 10.16 ] ISO 15849:2001, Ships and marine technology - Guidelines for implementation of a fleet management system network [ 10.21 ] ISO 15849 Amd1:2003, Ships and marine technology - Guidelines for implementation of a fleet management system network AMENDMENT 1 [ 10.17 ] ISO PAS 16917:2002, Ships and marine technology - Data transfer standard for maritime and intermodal transportation

52 Effluent standards MEPC 38, 96-07-01/10

[ 02.02 ] Effluent standards

53 Wash bulkheads in cargo tanks for double hull oil tankers MEPC 38, 96-07-01/10

[ 01.13 ] ISO 15372:2000, Ships and marine technology - Inflatable rescue boats - coated fabrics for inflatable chambers

[ 08.17 ] ISO 6042:1998, Ships and marine technology - Weathertight single- leaf steel doors

54 Hydrostatic release units SOLAS 1974, Ch. III Res. MSC.81 (70) LSA Code

55 Service and maintenance of inflatable life rafts

56 Gas inflation systems for inflatable Life-saving appliances SOLAS 1974, Ch. � Res. MSC,81 (70) LSA Code

57 Pyrotechnic distress signals SOLAS 1974, III LSA Code

[ 01.16 ] ISO 15734:2001, Ships and marine technology - Hydrostatic release units

58 Life jackets lights and other

position indicating lights SOLAS 1974, Ch.� Res.MSC,81 (70)

[ 01.18 ] PRF 15735, Ships and marine technology - Service of inflatable liferafts – Training of servicing technicians and format of servicing records (see IMO-link-NR 67, 68)

[ 09.02 ] ISO 2412:1982, Shipbuilding - Colours of indicator lights (see also IMO-Link-NR 07, 23)

59 Track control systems MSC74 (69)

[ 01.17 ] ISO 15738:2002, Ships and marine technology - Gas inflation systems for inflatable life-saving appliances (see IMO-link-NR 67, 68)

[ 06.18 ] IEC 62065:2002 Maritimes navigation and radio communication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results

[ 06.18 ] IEC 62065:2002, Maritimes navigation and radio communication equipment and systems - Track control systems - Operational and performance requirements methods of testing and required test results

60 Electronic generated field of vision IMO A.694 (17)

[ 01.14 ] ISO 15736:2006, Ships and marine technology - Pyrotechnic life-saving appliances – Testing, inspection, and marking of production units (see IMO-link-NR 78)

[ 06.38 ] PWI Electronically generated field of vision 61 Watch alarm and transfer system

MSC.128 (75), Performance standards for a bridge navigational watch alarm system (BNWAS)

[ 06.39 ] PWI Bridge watch alarm, central alarms and alarm management


page 47 62 Suitable design arrangements for

container securing operations aboard ships DE 41, report 12.2

63 Engine-room fuel oil systems DE 41, report 16.23

64 Ship’s whistle COLREG 72 Annex III/3,

65 Fireman’s outfit (see also item X2) SOLAS 1974, Ch. II-2, FSS Code

[ 01.41 ] ISO 17339:2002, Ships and marine technology - Sea anchors for survival craft and rescue boats

66 Performance standard for Marine

Transmitting Heading Devices MSC/Res.116 (73)

[ 01.60 ] ISO 24408:2006, Ships and marine technology - Position-indicating lights for life-saving appliances - Testing, inspection, and marking of production units

[ 06.22 ] ISO 22090-1:2002, Ships and marine technology - Transmitting heading devices (THDs) - Part 1: Gyro-compasses [ 06.22C ] ISO 22090-1:2002/Cor1:2005, Ships and marine technology - Transmitting heading devices (THDs) - Part 1: Gyro-compasses - Technical corrigendum1 [ 06.28 ] ISO 22090-2:2004, Ships and marine technology - Transmitting

Heading Devices (THDs) - Part 2 : Geomagnetic principles

[ 06.28C ] ISO 22090-2:2004/Cor1:2005, Ships and marine technology - Transmitting Heading Devices(THDs) – Part 2: Geomagnetic principles - Technical corrigendum1 [ 06.29 ] ISO 22090-3:2004, Ships and marine technology - Transmitting

Heading Devices (THDs) - Part 3: GNSS principles

[06.29C] ISO 22090-3:2004/Cor1:2005, Ships and marine technology-Transmitting Heading Devices(THDs) - Part 3: GNSS principles - Technical corrigendum1

67

SOLAS V (19) 2.9.1 2.5.4



[ 06.30 ] ISO 20672:2007, Ships and marine technology - Rate of turn indicators [ 06.26 ] ISO 20673:2007, Ships and marine technology - Electric rudder angle indicators [ 06.27 ] ISO 22554:2007, Ships and marine technology - Propeller shaft

revolution indicators - Electric type and electronic type

[ 06.31 ] ISO 22555:2007, Ships and marine technology - Propeller pitch indicators

68 SOLAS 1974, Amendment, MSC 47 (66), LSA code [MSC. 48 (66)]




69

SOLAS -2, 1974 Amendment and MSC/ Cire.1097, 2003-10, Guideline relating the implementation of SOLAS Chapter -2 and the ISPS code MSC80/WP.7 Measures to enhance Maritime security

[ 00.01 ] ISO 28000, Specification for security management systems for the supply chain

[ 00.03 ] ISO 28003, Security management systems for the supply chain-Requirements for the bodies providing audit and certification of supply chain security management systems

[ 00.02P ] PAS 28004:2006Security management systems for the supply chain-Guidelines for the implementation of ISO\PAS28000

[ 00.01P ] PAS 28000:2005Specification for security management systems for the supply chain

[ 00.03P ] PAS 28003:2006Security management systems for the supply chain-Requirements for bodies providing audit and certification of security management systems

[ 00.02 ] DIS 28004, Security management systems for the supply chain – Guidelines for the implementation of ISO/PAS 28000

[ 11.03P ] ISO PAS 20858:2004, Ships and marine technology - Marine port facility security assessments and security plan development [ 11.04P ] ISO PAS 28001:2006, Security management systems for the supply chain - Best practices for implementing supply chain security-Assessments and plans [ 11.03 ] ISO/DIS 20858, Ships and marine technology - Maritime port facility security assessments and security plan development [ 11.04 ] ISO/DIS 28001, Security management systems for the supply chain- Best Practices for implementing supply chain security - Assessments and plans requirements and guidance

70 SOLAS 1974 Amendment and IMO A.830 (19), 861 (20) MSC163 (78)

[ 06.35 ] ISO 22472:2006, Ships and marine technology - Guideline for the operation and installation of voyage data recorder (VDR)

71 Fire Control Plans FP SOLAS 1974, Ch -2, Res. A.654(16) MSC/Circ. 1050

72 Breathing devices (see also item 76) SOLAS 1974, Ch -2 FSS Code IGC Code BHC Code

73 FSS Code Chapter 3, Reg.2.2.3

[ 04.28 ] Suitable design arrangements for container securing operations aboard ships

74 Pilot, embarkation and accommodation Ladders SOLAS 1974, Ch. �

[ 01.07 ] ISO 7364:1983, Shipbuilding and marine structures - Deck machinery - Accommodation ladder winches

[ 03.47 ] ISO 18770, Ships and marine technology - Machinery Space flammable oil systems - Guidelines to prevent leakage of flammable oil

[ 01.03R ] FDIS 5489, Shipbuilding - Embarkation ladders (Revision of ISO 5489:1986)

75 Structural Fire Protection Plan SOLAS 1974, Ch. -2


page 49 76 Escape routes marking

SOLAS 1974, Ch. -2 [ 01.59 ] PRF 23269-1, Ships and marine technology - Breathing

apparatus for ships - Part 1 - Emergency escape breathing devices (EEBB) for ship-board use

[ 01.55 ] DIS 22488, Ships and marine technology - Shipboard fire fighters' outfits ( Protective clothing, gloves, boots, and helmets )

[ 01.66 ] ISO/AWI 23269-2, Ships and marine technology – Breathing apparatus for ships – Part 2 – Breathing apparatus for shipboard firefighters

[ 01.67 ] ISO/AWI 23269-3, Ships and marine technology - Breathing apparatus for ships - Part 3 - Self-contained breathing apparatus (safety equipment) required by the IMO IBC and IGC Codes

[ 01.68 ] ISO/NP 23269-4, Ships and marine technology- Breathing apparatus for ships – Part 4 : Self-contained breathing apparatus for emergency escape required by the IMO IBC and IGC Codes

77 Means for accessing the ship [ 01.06 ] ISO 7061:1993, Shipbuilding - Aluminium shore gangways for seagoing vessels

78 IMO/FP Flame detectors

[ 01.14 ] ISO 15736:2006, Ships and marine technology - Pyrotechnic life-saving appliances – Testing, inspection, and marking of production units (see IMO-link-NR 60)

79 IMO/FP Thermal protective aids

80 Performance standards for fire safety systems

81 FTP Code Fire Test Procedures SOLAS 1974 �,reg3

82 Fire Extinguishers SOLAS 1974, Ch. -2 FSS Code

83 84 SOLAS 1974 Chapter V,

Regulation 15 Principles relating to bridge design... MSC/Circ.982 GUIDELINES ON ERGONOMIC CRITERIA FOR BRIDGE EQUIPMENT AND LAYOUT

[ 06.36 ] ISO 8468:2007, Ships and marine technology - Ship’s bridge layout and associated equipment - Requirements and guidelines (see IMO-link-NR 15)

85 MSC.86(70) annex1, Sound Reception Systems from A.2 to A.1 of the Marine Equipment Directives

[ 06.41 ] PWI Ships and marine technology - Sound reception systems

86 MEPC 54/4/3 Standardization for on shore power supply (cold ironing)

[ 03.67 ] ISO/CD 29501, Ships and marine technology – Preservation of the environment – Cold ironing

87 SOLAS /6.3 Coating for ballast

tank and double –side skin space SOLAS-1/3-2,

[ 09.29 ] NP Ships and marine technology- Coating standard (see IMO-link-NR 34)

88 IMO/FAL, Electronic Port Clearance

[ 10.22 ] AWI 28005, Ships and marine technology - Electronic port clearance (EPC)


89 MSC.95(72) Annex13, Performance Standards for Daylight Signalling lamps

[ 06.33 ] PRF 25861, Ships and marine technology - Navigation - Daylight signaling lamps

90 SOLAS 1974,Ch.V-5 [ 06.34 ] WD 10596, Ships and marine technology - Marine wind vane and

anemometers 91 MEPC??(33) [ 02.04 ] AWI 21071, Ships and marine technology - Oil water separators


page 51

Annex B

Index on IMO Resolutions

This index on IMO Resolutions and other relevant IMO documents refers to the IMO-link-NR according to annex A.

IMO Resolution or document

IMO-link-NR Title or subject

A.210 (VII) NR 01 Recommendation on steering gear for large ships A.224 (VII) NR 06 Performance standards for echo sounding equipment A.342 (IX) NR 01 Performance standards for Automatic Pilots A.384 (X) NR 11 Performance standards for radar reflectors A.424 (XI) NR 10 Performance standards for gyro-compasses A.477 (XII) NR 11 Performance standards for radar equipment A.603 (15) NR 14 Symbols related to life-saving appliances and Arrangements A.654 (16) NR 71 Graphical symbols for fire control plans A.667 (16) NR 42 Pilot transfer arrangements A.686 (17) NR 23 Code on alarms and indicators A.689 (17) NR 49, 60, 61,

79

Testing of lifesaving appliances - Immersion suits, anti-exposure suits, thermal protective aids and marine evacuation systems (MES)

A.694 (17) NR 01, 04, 05, 10, 60

General requirements for shipborne radio equipment forming part of the global maritime distress and safety system (GMDSS) and for electronic navigational aids

A.751 (18) MSC/Circ.1053

NR 50 NR 50

Interim standards for ship manoeuvrability Explanatory notes to the standards for ship manoeuvrability

A.752 (18) NR 17 Guide lines for the evaluation, testing and application of low location lighting (LLL) on passenger ships

A.753 (18) NR 26 Guide lines for the application of plastic pipes on ships A.757 (18) NR 16 Widths of escape stairways on passenger ships A.760 (18) NR 14 Symbols related to life-saving appliances A.794 (19) NR 41 Surveys and inspections of ro-ro passenger ships A.798 (19) NR 34 Guide lines for the selection, application and maintenance of

corrosion prevention systems of seawater ballast tanks SOLAS, 11-1, Reg.14-1 MSC/Circ.866 MSC/Circ.981

NR 34 NR 35 NR 36

(Draft) concerning corrosion prevention of dedicated seawater ballast tanks of new oil tankers and bulk carriers Guidelines for the application safety standards to pusher tug-barge Guidelines for the design, construction and operation of passenger submersible craft

A.800(19) NR 19 Revised guide lines for approval of sprinkler systems equivalent to that referred to in SOLAS regulation II-2/12 which revoked resolution A.755 (18)

A.821 (19) NR 48 Gyro-compasses for high-speed craft A.822 (19) NR 47 Automatic steering aids (automatic pilots) for high speed craftA.830 (19) NR 70 Code on alarms and indicators 1995 MEPC.54/4/3 MEPC.?? (33) MEPC.59 (33)

NR 86 NR 91 NR 13

Standardization for on-shore power supply (Cold ironing) Oil water separators Revised guidelines for the implementation of Annex V of MARPOL 73/78 adopted on 30 October 1992

MSC.36 (63) NR 39 High speed craft (HSC) Code", made mandatory by new SOLAS chapter X

MSC.44 (65) NR 39 Standards for fixed sprinkler systems for high speed craft MSC.45 (65) NR 39 Test procedures for fire-resisting divisions of high speed craft

ISO/TC8 N1000 R12 Status report page 52 IMO Resolution or document

IMO-link-NR Title or subject

MSC.48 (66) NR 09, 14, 18, 54, 56, 57, 58, 68, 78

Adoption of the International Life-Saving Appliance (LSA) Code

MSC86 (70)Annex MSC.95 (72)Annex MSC/Circ.1050

NR 85 NR 89 NR 71

Sound reception system Performance standard for daylight signalling lamps Guidance concerning the location of fire control plans for the assistance of shore-side fire-fighting personnel

MSC/Circ.566 NR 15 Trials on one man operated bridges may be executed MSC/Circ.568 Rev. 1

NR 42 Pilot transfer arrangements

MSC/Circ.646 NR 32 Hull stress monitoring systems (HSMS)/voyage data recorders for ships.

MSC/Circ.648 NR 25 Guidelines for the operation, inspection and maintenance of ship sewage systems

MSC/Circ.668 NR 20 Alternative arrangements for halon fire-extinguishing systems in machinery spaces

MSC/Circ.687 NR 39 Emergency source of Power for category A high speed craft MSC/Circ.699 NR 17 Revised guidelines for passenger safety instruction SOLAS 1974, II, part B-2

NR 03 Bulk carrier safety

SOLAS 1974, V NR 15 Bridge equipment and lay out SOLAS 1974, II, reg. 3

NR 08, 81 Fire test procedure

SOLAS 1974, II-1, reg. 29 and 30

NR 01 Heading control systems

SOLAS 1974, V NR 10, 90 Marine gyro compasses, Marine wind vane and anemometers

SOLAS 1981, V , reg. 12

NR 06 Shipborne navigational equipment

SOLAS 1981, V , reg. 19

NR 01 Heading control systems

SOLAS 1995 resolution 14

NR 41 Regional arrangements on specific stability requirements for ro-ro passenger ships

SOLAS, II-1, reg.14-1

(draft) concerning corrosion prevention of dedicated seawater ballast tanks of new oil tankers and bulk carriers

SOLAS, II-2 reg. FSS-3

NR 76, 72 Fire fighters’ outfits

SOLAS, II-2 Reg.3 MSC/Res. 116 (73)

NR 80, 81, 82 NR 66

Fire safety Performance standard for Marine transmitting Heading Devices

MSC.8 (70) A689 (17)

NR 49 Production testing of pyrotechnic

SOLAS V-19 NR 67 Carriage requirements for ship-borne navigational systems and equipment

IMO A.861(20) NR 70 Performance standards for simplified voyage data recorders(VDRs)

SOLAS 1974 NR 68 Adoption of amendments to the international convention for Amendment, LSA code [MSC. 48(66)] the safety of life at sea

SOLAS -2 SOLAS -2, 1974 Amendment

NR 69 Implementation of SOLAS chapter -2 and THE ISPS Code

SOLAS /6.3 NR 87 Coating for ballast tank and double –side skin space IMO/FAL NR 88 Electronic Port Clearance


page 53

Annex C Index on ISO standard numbers

This index on ISO standard numbers refers to the internal ISO/TC 8 work item numbers used in this document and the IMO-link-NR’s according to Annex A.

Index Standard Number Standard Title work item IMO-link-NR ISO 21:1985 Shipbuilding - Inland navigation - Cable-lifters for stud-link anchor chains 07.01 ISO 449:1997 Ships and marine technology - Magnetic compasses, binnacles and azimuth 06.01 reading devices - Class A ISO 484-1:1981 Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 1: 03.01 Propellers of diameter greater than 2,50 m ISO 484-2:1981 Shipbuilding - Ship screw propellers - Manufacturing tolerances - Part 2: 03.02 Propellers of diameter between 0,80 and 2,50 m inclusive ISO/R 538:1967 Conventional signs to be used in schemes for the installations of pipeline 03.03 systems in ships ISO 613:2000 Ships and marine technology - Magnetic compasses, binnacles and azimuth 06.02 reading devices - Class B ISO 614:1989 Shipbuilding and marine structures - Toughened safety glass panes for 08.01 rectangular windows and side scuttles - Punch method of non-destructive strength testing ISO/R 644:1967 Conventional signs to be used in schemes for the installation of ventilation 03.04 systems in ships ISO 694:2000 Ships and marine technology - Positioning of magnetic compasses in ships 06.03 ISO/R 784:1968 Conventional signs to be used in schemes for the installation of sanitary 03.05 systems in ships ISO 799:2004 Shipbuilding - Pilot ladders 01.01, IMO-link-NR 43 ISO 1069:1973 Magnetic compasses and binnacles for sea navigation - Vocabulary 06.04 ISO 1095:1989 Shipbuilding and marine structures - Toughened safety glass panes for side 08.02 scuttles ISO 1704:1991 Shipbuilding - Stud-link anchor chains 04.01 FDIS 1704 Shipbuilding - Stud-link anchor chains 04.01R ISO 1751:1993 Shipbuilding and marine structures - Ships' side scuttles 08.03 ISO 1964:1987 Shipbuilding - Indication of details on the general arrangement plans of ships 09.01 ISO 2269:1992 Shipbuilding - Class A magnetic compasses, azimuth reading devices and 06.05 binnacles - Tests and certification ISO 2412:1982 Shipbuilding - Colours of indicator lights 09.02, IMO-link-NR 7, 23, 58 ISO 3078:1987 Shipbuilding - Cargo winches 04.02 ISO 3254:1989 Shipbuilding and marine structures - Toughened safety glass panes for 08.04 rectangular windows ISO 3372:1975 Shipbuilding - Inland vessels - Mushroom-type ventilator heads 07.02 ISO 3434:1992 Shipbuilding and marine structures - Heated glass panes for ships' rectangular 08.05 windows ISO 3434:1992Amd1 Shipbuilding and marine structures - Heated glass panes for ships' rectangular 08.05A windows - Amendment 1 ISO 3652:1975 Shipbuilding - Inland vessels - Rope reels 07.03 ISO 3674:1976 Shipbuilding - Inland vessels - Deck rail 07.04 ISO 3715-1:2002 Ships and marine technology - Propulsion plants for ships Part 1 : Terms and 03.06 definitions for geometry of propellers

ISO 3715-2:2001 Ships and marine technology - Propulsion plants for ships - Part 2 : Vocabulary 03.35 for controllable-pitch propeller plants


Index Standard Number Standard Title work item IMO-link-NR ISO 3730:1988 Shipbuilding - Mooring winches 04.03 ISO 3786:1975 Shipbuilding - Inland navigation vessels towing hooks - Scale of tractive efforts 07.05 ISO 3796:1999 Ships and marine technology - Clear openings for external single-leaf doors 08.06 ISO 3797:1976 Shipbuilding - Vertical steel ladders 08.07 ISO 3828 Shipbuilding and marine structures - Deck machinery - Vocabulary 04.04 ISO 3828 Shipbuilding and marine structures - Deck machinery - Vocabulary 04.04R ISO 3876:1986 Shipbuilding - Inland vessels - Hand-holes 07.06 ISO 3902:1990 Shipbuilding and marine structures - Gaskets for rectangular windows and side 08.08 scuttles ISO 3903:1993 Shipbuilding and marine structures - Ships' ordinary rectangular windows 08.09 ISO 3904:1990 Shipbuilding and marine structures - Clear-view screens 08.10 ISO 3913:1977 Shipbuilding - Welded steel bollards 07.07 ISO 3913Add1:1980 Addendum 1: Double bollards for inland navigation 07.07A ISO 3926:1980 Shipbuilding - Inland navigation - Couplings for oil and fuel reception - Mating 07.08 dimensions ISO 3935:1977 Shipbuilding - Inland navigation - Fire-fighting water system - Pressures 07.09 ISO 3948:1977 Shipbuilding - Inland vessels - Compressed-air systems - Pressure ranges 07.10 ISO 3969:1979 Shipbuilding - Inland vessels - Operational documentation 07.11 ISO 4001:1977 Shipbuilding - Inland vessels - Raft-type life-saving apparatus 07.12 ISO 4050:1977 Shipbuilding - Inland vessels - "Rhine" and Hall's stockless anchors 07.13 ISO 4051:1977 Shipbuilding - Inland vessels - Steering gear - Values of torques 07.14 ISO 4085:1979 Shipbuilding - Inland navigation - Swing derricks 07.15 ISO 4089:1979 Shipbuilding - Inland navigation - Sealing rubber for covers of cargo hatches 07.16 ISO 4127-1:1979 Shipbuilding - Inland navigation - Fairleads - Part 1: Two-lip fairleads 07.17 ISO 4127-2:1980 Shipbuilding - Inland navigation - Fairleads - Part 2: Roller fairleads 07.18 ISO 4143:1981 Shipbuilding - Inland navigation - Open rowing lifeboats 07.19 ISO 4175:1979 Shipbuilding - Shipborne barges, series 1: Main dimensions 07.20 ISO 4568:2006 Shipbuilding - Sea going vessels - Windlasses and anchor capstans 04.05 ISO 5480:1979 Shipbuilding - Guard rails for cargo ships 08.11 ISO 5483:2003 Ships and marine technology - Drain plugs, welding rings, and gaskets for oil 03.07 and water tank drains ISO 5485:1986 Shipbuilding - Inland vessels - Fixed steel deck stairs 07.21 ISO 5488:1979 Shipbuilding - Accommodation ladders 01.02, IMO-link-NR 43 FDIS 5489 Shipbuilding - Embarkation ladders 01.03R, IMO-link-NR 74 ISO 5572:1987 Shipbuilding and marine structures - Numbering of equipment and structural 10.01 elements in ships ISO 5620-1:1992 Shipbuilding and marine structures - Filling connection for drinking water tanks 03.09 - Part 1: General requirements

ISO 5620-2:1992 Shipbuilding and marine structures - Filling connection for drinking water tanks 03.10 - Part 2: Components ISO 5621:1984 Shipbuilding - Bilge mud boxes for machinery spaces and tunnels - General 03.11 design characteristics ISO 5625:1978 Shipbuilding - Welded bulkhead pieces with flanges for steel pipe work - PN 6, 03.12 PN 10 and PN 16 ISO 5778:1998 Ships and marine technology - Small weathertight steel hatches 08.12, IMO-link-NR 40 ISO 5779:1987 Shipbuilding - Ordinary rectangular windows - Positioning 08.13 ISO 5780:1987 Shipbuilding - Side scuttles - Positioning 08.14 ISO 5797:2004 Ships and marine technology - Windows and side scuttles for fire-resistant 08.22, IMO-link-NR 08 constructions ISO5797-1:1989 Shipbuilding and marine structure-Windows and side scuttles for fire resistant 08.15 constructions-Specifications-Part1:'B'class divisions


page 55

Index Standard Number Standard Title work item IMO-link-NR ISO 5894:1999 Ships and marine technology - Manholes with bolted covers 08.16 ISO/TR 5987:1984 Inland navigation - Water fire-fighting system - Couplings of fire hoses - 07.22 General technical requirements ISO 6042 : 1998 Ships and marine technology - Weathertight single-leaf steel doors 08.17, IMO-link-NR 53 ISO 6043:1985 Shipbuilding and marine structures - Eye and fork assemblies under tension 04.06 load - Main dimensions ISO 6044:1985 Shipbuilding and marine structures - Derrick boom heel fittings - Main 04.07 dimensions ISO 6045:1987 Shipbuilding and marine structures - Bearings for derrick goosenecks - 04.08 Assemblies and components ISO 6050:1987 Shipbuilding - Bulbous bow and side thruster symbols 09.08 ISO/TR 6065:1991 Shipbuilding and marine structures - Inflatable liferafts - Materials 01.04,IMO-link-NR 09 ISO 6115:1988 Shipbuilding - Trawl winches 04.09 ISO 6205:1988 Inland navigation vessels - Customs sealing systems - Basic technical 07.23 requirements ISO 6216:1980 Shipbuilding - Inland navigation - Pilot craft - Classification and basic 07.24 requirements ISO 6217:1982 Shipbuilding - Inland navigation - Pilot craft - Identification painting and 07.25 inscriptions

ISO 6218:2005 Ships and marine technology - Inland navigation vessels - Manually operated 07.26 coupling devices for push tows-safety requirement and main dimensions ISO 6219:1983 Shipbuilding - Inland vessels - Windlasses and anchor capstans 07.27 ISO 6325:1987 Shipbuilding - Cable stoppers 04.10 ISO 6345 : 1990 Shipbuilding and marine structures - Windows and side scuttles - Vocabulary 08.18 ISO 6454:1984 Shipbuilding - Strum boxes 03.13 NP 6482 Shipbuilding - Deck machinery - Warping end profiles (Revision of ISO 04.11R 6482:1980) ISO 6482:1980 Shipbuilding - Deck machinery - Warping end profiles 04.11 ISO 6555:1988 Shipbuilding - Topping winches 04.12 ISO 6582:1983 Shipbuilding - Numerical control of machines - ESSI format 10.02 ISO 6764:1985 Shipbuilding - Shipborne barges, series 1 - Lifting post casting - Arrangement, 07.28 dimensions and method of testing ISO 6765:1985 Shipbuilding - Shipborne barges, series 3 - Main dimensions 07.29 ISO 6766:1984 Shipbuilding - Shipborne barges, series 4 - Main dimensions 07.30 ISO 6812:1983 Roll on/Roll off ship to shore connection - Interface between terminals and 04.13 ships with straight stern/bow ramps ISO 7061:1993 Shipbuilding - Aluminium shore gangways for seagoing vessels 01.06, IMO-link-NR 77 CD DAM 7061:1993 Ships and marine technology - Pedestrian access equipment for ships( 01.06DAM Revision of ISO 7061:1993 ) ISO 7221:1984 Shipbuilding and marine structures - Shipborne barges, series 1, on barge 07.31 carriers - Principal technical requirements ISO 7222:1985 Shipbuilding - Shipborne barges, series 2 - Main dimensions 07.32 ISO 7236:1991 Inland navigation vessels - Demountable signal masts for push-tows - Mounting 07.33 attachment ISO/AWI7240-26 Oil mist detectors ISO 7255:1985 Shipbuilding - Active control units of ships - Vocabulary 07.34 ISO 7364:1983 Shipbuilding and marine structures - Deck machinery - Accommodation ladder 01.07, IMO-link-NR 74 winches ISO 7365:1983 Shipbuilding and marine structures - Deck machinery - Towing winches for 04.14 deep sea use ISO 7460:1983 Shipbuilding - Shiplines - Identification of geometric data 10.03 ISO 7461:1984 Shipbuilding - Shiplines - Numerical representation of elements of the hull 10.04 geometry


Index Standard Number Standard Title work item IMO-link-NR ISO 7462:1985 Shipbuilding - Principal ship dimensions - Terminology and definitions for 10.05 computer applications ISO 7463:1990 Shipbuilding - Symbols for computer applications 10.06 ISO 7545:1983 Shipbuilding and marine structures - Inland navigation - Single-lock automatic 07.35 couplings for push tows ISO 7547:2002 Ships and marine technology - Air-conditioning and ventilation of 03.14 accommodation spaces on board ships - Design conditions and basis NP 7547:2002 Ships and marine technology- Air conditioning and ventilation of accommodation 03.14R spaces on board ships- Design conditions and basis calculations ISO 7606:1988 Shipbuilding - Inland navigation vessels - Draught scales 07.36 ISO 7607:1984 Shipbuilding - Inland navigation - Multi-bucket dredgers - Scale of bucket 07.37 capacities ISO 7608:1985 Shipbuilding - Inland navigation - Couplings for disposal of oily mixture and 07.38 sewage water PWI 7824 Ships and marine technology - Lubrication nipples - Cone and flat 04.15R types(Revision of ISO 7824:1986) ISO 7824:1986 Shipbuilding and marine structures - Lubrication nipples - Cone and flat types 04.15 PWI 7825 Shipbuilding - Deck machinery - General requirements (Revision of 7825:1985) 04.16R ISO 7825:1985 Shipbuilding - Deck machinery - General requirements 04.16 ISO 7838:1984 Shipbuilding - Shiplines - Formats and data organization 10.07 ISO 8146:1985 Shipbuilding and marine structures - Oval eye plates 04.17 ISO 8146:1985 (Revision of ISO 8146:1985) 04.17R ISO 8147:1995 Shipbuilding and marine structures – Derrick rigs and component parts – Vocabulary 04.18 ISO 8148:1985 Shipbuilding and marine structures - Derrikboom headfittings - Fixed type 04.19R ISO 8148:1985 Shipbuilding and marine structures - Derrick boom headfittings - Fixed type 04.19 ISO 8193:1984 Shipbuilding - Shell plating information 10.08 ISO 8277:1988 Shipbuilding - Pipework - Information transfer 10.09 ISO 8303:1985 Shipbuilding - Shipborne barges, series 3 - Main operational and technical 07.39 requirements ISO 8304:1984 Shipbuilding - Shipborne barges, series 3 - Ventilation system - Principal 07.40 mating dimensions ISO 8314:1987 Shipbuilding and marine structures - Trunnion pieces for span bearings and 04.20 lead block bearings ISO 8384:2000 Ships and marine technology - Dredgers - Vocabulary 07.41 ISO 8385:1999 Ships and marine technology - Dredgers - Classification 07.42 ISO 8431:1988 Shipbuilding - Fixed jib cranes - Ship-mounted type for general cargo handling 04.21 ISO 8468 Ships and marine technology- Ship's bridge layout and associated equipment - 06.36R, IMO-link-NR 15, 84 Requirements and guidelines

ISO 8728:1997 Ships and marine technology - Marine gyro-compasses 06.06, IMO-link-NR 10 WD 8729-1 Ships and marine technology-Marine radar reflector (Revision of ISO 06.07R, IMO-link-NR 11 8729:1997) WD 8729-2 Ships and marine technology-Marine radar reflector (Revision of ISO 06.07R, IMO-link-NR 11 8729:1997) ISO 8729:1997 Ships and marine technology - Marine radar reflectors 06.07, IMO-link-NR 11 ISO 8861:1998 Shipbuilding - Engine room ventilation in diesel-engined ships - Design 03.15 requirements and basis of calculations ISO 8861:1998 Shipbuilding- Engine room ventilation in diesel-engined ships-Design 03.15 requirements and basis of calculations

ISO 8862:1987 Air-conditioning and ventilation of machinery control-rooms on board ships - 03.16 Design conditions and basis of calculations ISO 8863:1987 Ship's wheelhouse windows - Heating by hot air of glass panes 03.17 ISO 8864:1987 Air-conditioning and ventilation of wheelhouse on board ships - Design 03.18 conditions and basis of calculations


page 57

Index Standard Number Standard Title work item IMO-link-NR PWI 9089 Marine structures - Mobil offshore units - Anchor winches 04.22R ISO 9089:1989 Marine structures - Mobile offshore units - Anchor winches 04.22 ISO 9099:1987 Air-conditioning and ventilation of dry provision rooms on board ships - Design 03.19 conditions and basis of calculations ISO 9203-1:1989 Shipbuilding - Topology of ship hull structure elements - Part 1: Location of 10.10 elements ISO 9203-2:1989 Shipbuilding - Topology of ship hull structure elements - Part 2: Description of 10.11 elements ISO 9203-3:1989 Shipbuilding - Topology of ship hull structure elements - Part 3 : Relations of 10.12 elements NP 9367-1 Lashing and securing arrangements on road vehicles for sea transportation on 04.23R Ro/Ro ships - general requirements - Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded (Revision of ISO9367-1:1989) ISO 9367-1:1989 Lashing and securing arrangements on road vehicles for sea transportation on 04.23 Ro/Ro ships - general requirements - Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded NP 9367-2 Lashing and securing arrangements on road vehicles for sea transportation on 04.24R Ro/Ro ships - General requirements - Part 2: Semi-trailers (Revision of ISO 9367-2:1994) ISO 9367-2:1994 Lashing and securing arrangements on road vehicles for sea transportation on 04.24 Ro/Ro ships - General requirements - Part 2: Semi-trailers ISO 9382:1990 Shipborne barges, all series - Classification and main requirements 07.43 ISO 9437:1986 Shipbuilding - Inland vessels - Matrosov anchors 07.44 ISO 9519:1990 Shipbuilding and marine structures - Rungs for dog-step ladders 08.19 ISO 9785:2002 Ships and marine technology - Ventilation of cargo spaces where internal 03.20, IMO-link-NR 25 combustion engine vehicles may be driven - Calculation of theoretical total airflow required ISO 9875:2000 Ships and marine technology - Marine echo-sounding equipment 06.08, IMO-link-NR 06 ISO9875/Corl:2006 Ships and marine technology-Marine echo-sounding equipment- Technical corrigendum1 06.08C, IMO-link-NR 06 ISO 9876:1997 Ships and marine technology - Marine facsimile receivers for meteorological 06.09 charts ISO 9943:1991 Shipbuilding - Ventilation and air-treatment of galleys and pantries with cooking 03.21 appliances ICD9943:1991 Ships and marine technology - Ventilation and air treatment of galleys and 03.21R pantries with cooking appliances ISO10316:1990 Shipbuilding - Class B magnetic compasses - Tests and certification 06.10 WD 10596 Ships and marine technology – Marine wind vane and anemometers 06.34, IMO-link-NR 90 ISO AWI 11208 Ships and marine technology – Large yachts - windows and port-lights – Strength and water 12.03 tightness ISO AWI 11209 Ships and marine technology – Large yachts - windows and port-lights – Strength and water 12.04 tightness ISO AWI 11336 Ships and marine technology – Large yachts - windows and port-lights – Strength and water 12.01 tightness ISO AWI 11347 Ships and marine technology – Large yachts – Measurement and analysis of the visual 12.02 appearance of coasting ISO11606/Corl:2005 Ships and marine technology-Marine electromagnetic compasses- Technical corrigendum1 06.11C, IMO-link-NR 05 ISO11606:2000 Ships and marine technology - Marine electromagnetic compasses 06.11, IMO-link-NR 05 ISO11674:2006 Ships and marine technology - Heading control systems 06.12, IMO-link-NR 01 ISO/TR13298:1998 Ships and marine technology - Vocabulary of general terms 09.09 ISO13617:2001 Ships and marine technology - Shipboard incinerators - Requirements 03.22, IMO-link-NR 13


Index Standard Number Standard Title work item IMO-link-NR NP13819 Petroleum and natural gas industries - Offshore structures - Part 4 : Floating 04.25, IMO-link-NR 29 structures ISO/TR14564:1995 Shipbuilding and marine structures - Marking of escape routes 01.08, IMO-link-NR 14 ISO14612:2004 Ships and marine technology - Ship's bridge layout and associated equipment - 06.37, IMO-link-NR 15, 84 Requirements and guidelines for centralized and integrated bridge functions ISO/FDIS14726 Ships and marine technology-Identification colours for the content of piping 03.23R, IMO-link-NR 02 systems ISO14726-1:1999 Ships and marine technology - Identification colours for the content of piping 03.23, IMO-link-NR 02 systems - Part 1: Main colours and media ISO14726-2:2002 Ships and marine technology - Identification colours for the content of piping 03.24, IMO-link-NR 02 systems - Part 2: Additional colours for media and/or functions ISO15016:2002 Ships and marine technology - General requirement - Guidelines for the 09.10 assessment of speed and power performance by means of sea trial data ISO/FDIS15364 Ships and marine technology - Pressure/vacuum valves for cargo tanks 03.25R, IMO-link-NR 33 ISO15364:2000 Ships and marine technology - Pressure/vacuum valves for cargo tanks 03.25, IMO-link-NR 34 ISO15370:2001 Ships and marine technology - Low-Location Lighting on passenger 01.11, IMO-link-NR 17 ships-Arrangement ISO15371:2000 Ships and marine technology - Fire extinguishing systems for protection of 01.12, IMO-link-NR 46 galley deep frying equipment - Fire tests ISO15372:2000 Ships and marine technology - Inflatable rescue boats - coated fabrics for 01.13, IMO-link-NR 53 inflatable chambers ISO15401:2000 Ships and marine technology - Bulk carriers - Construction quality of hull 08.20, IMO-link-NR 03 structure ISO15402:2000 Ships and marine technology - Bulk carriers - Repair quality of hull structure 08.21, IMO-link-NR 03 ISO15516:2006 Ships and marine technology - Launching appliances for davit-launched 04.26 lifeboats ISO15540:1999 Ships and marine technology - Fire resistance of hose assemblies - Test 03.26, IMO-link-NR 47 methods NP15540:1999 Ships and marine technology-Fire resistance of hose assemblies-Test methods 03.26R ISO15540Cor.1:1999 Ships and marine technology-Fire resistance of hose assemblies-Test methods 03.26c, IMO-link-NR 47 technical corrigendum1 ISO15541:1999 Ships and marine technology-Fire resistance of hose assemblies-Requirements 03.27 on the test bench

NP15541:1999 Ships and marine technology-Fire resistance of hose assemblies-Requirements 03.27R on the test bench ISO15541:1999 Ships and marine technology - Fire resistance of hose assemblies - 03.27, IMO-link-NR 47 Requirements on the test bench ISO15583:2005 Ships and marine technology - Maritime standards list 09.11 ISO15734:2001 Ships and marine technology - Hydrostatic release units 01.16, IMO-link-NR 57 PRF15735 Ships and marine technology - Service of inflatable liferafts - Training of 01.18, IMO-link-NR 58, 67, 68 servicing technicians and format of servicing records ISO15736:2006 Ships and marine technology - Pyrotechnic distress signals - Testing, 01.14, IMO-link-NR 60 inspection and marking of production unites ISO15738:2002 Ships and marine technology - Gas inflation systems for inflatable life-saving 01.17, IMO-link-NR 59, 67, 68 appliances ISO15748-1:2002 Ships and marine technology - Potable water supply on ships and marine 03.28 structures - Part 1 : Planning and design ISO15748-2:2002 Ships and marine technology - Potable water supply on ships and marine 03.29 structures - Part 2 : Method of calculation NP15749-1:2004 Ships and marine technology- Drainage systems on ships and marine 03.30R structures-Part1:Sanitary drainage-system design


page 59

Index Standard Number Standard Title work item IMO-link-NR

ISO15749-1:2004 Ships and marine technology - Drainage systems on ships and marine 03.30, IMO-link-NR 26 structures - Part 1: Sanitary drainage-system design ISO15749-2:2004 Ships and marine technology - Drainage systems on ships and marine 03.31, IMO-link-NR 26 structures - Part 2 : Sanitary drainage, drain piping for gravity system NP15749-2:2004 Ships and marine technology- Drainage systems on ships and marine 03.31R structures- Part2:Sanitary drainage, drain piping for gravity system NP15749-3:2004 Ships and marine technology- Drainage systems on ships and marine 03.32R structures-Part3:Sanitary drainage, drain piping for vacuum systems ISO15749-3:2004 Ships and marine technology - Drainage systems on ships and marine 03.32, IMO-link-NR 26 structures - Part 3 : Sanitary drainage, drain piping for vacuum systems NP15749-4:2004 Ships and marine technology- Drainage systems on ships and marine 03.33R structures-Part4:Sanitary drainage, sewage disposal pipes ISO15749-4:2004 Ships and marine technology - Drainage systems on ships and marine 03.33, IMO-link-NR 26 structures - Part 4 : Sanitary drainage, sewage disposal pipes NP15749-5:2004 Ships and marine technology-Drainage systems on ships and marine 03.34R structures-Part5:Drainage of decks, cargo spaces and swimming pools ISO15749-5:2004 Ships and marine technology - Drainage systems on ships and marine 03.34, IMO-link-NR 26 structures - Part 5 : Drainage of decks, cargo spaces and swimming pools ISO15837:2004 Ships and marine technology - Gasketed mechanical couplings for use in 03.41 piping systems - Performance specification ISO15838:2003 Ships and marine technology - Fittings for use with gasketed mechanical 03.42 couplings used in piping applications-Performance specification ISO15840:2004 Ships and marine technology - Standard specification for Thermosetting resin 03.40, IMO-link-NR 27 fibreglass pipe and fittings to be used for marine applications ISO15849 Amd1:2003 Ships and marine technology - Guidelines for implementation of a fleet 10.21, IMO-link-NR 51 management system network AMENDMENT 1 ISO15849:2001 Ships and marine technology - Guidelines for implementation of a fleet 10.16, IMO-link-NR 51 management system network ISO16155:2006 Ships and marine technology - Shipboard loading instrument 10.15 ISO16165:2001 Ships and marine technology - Marine environment protection - Terminology 02.30 relating to environmental response ISO16273:2003 Ships and marine technology - Night vision equipment for high-speed craft - 06.19, IMO-link-NR 39 Operational and performance requirements, methods of testing and required test results WD16288 Ships and marine technology - Mechanical seals for shipboard pump 03.37 applications ISO16328:2001 Ships and marine technology-Gyro compasses for high speed craft 06.16, IMO-link-NR 10, 39, 48 ISO16329:2003 Ships and marine technology - Heading control systems for high-speed craft 06.15, IMO-link-NR 39, 47 ISO16446:2002 Ships and marine technology - Marine environment protection - Oil spill booms - 02.31 Adapter for joining dissimilar (oil spill boom) connectors PRF16848 Ships and marine technology - Pilot accommodation ladders 01.33, IMO-link-NR 43 ISO PAS16917:2002 Ships and marine technology - Data transfer standard for maritime and 10.17, IMO-link-NR 51 intermodal transportation DIS17338 Ships and marine technology - Drawings for fire protection - Indications of fire 01.32, IMO-link-NR 14 rating by divisions ISO17339:2002 Ships and marine technology - Sea anchors for survival craft and rescue boats 01.41, IMO-link-NR 65 ISO17357:2002 Ships and marine technology - High - pressure floating pneumatic rubber 09.23 fenders ISO/AWI17631 Ships and marine technology-Shipboard plans for fire protection, life-saving appliances and means of escape ISO17631:2002 Ships and marine technology - Shipboard plans for fire protection, life-saving 01.22, IMO-link-NR 14, 17 appliances and means of escape ISO 17884:2004 Ships and marine technology - Navigation - Searchlights for high speed craft 06.21, IMO-link-NR 39 ISO 17894:2005 Ships and marine technology - Computer applications - General principles for 10.14 the development and use of programmable electronic systems in marine

ISO/TC8 N1000 R12 Status report page 60 applications

Index Standard Number Standard Title work item IMO-link-NR CD17896 Ships and marine technology - Marine environment protection - Mechanical 02.38 equipment for oil spill response - Booms CD17897 Ships and marine technology - Marine environment protection - Mechanical 02.42 equipment for oil spill response - Part 2: Skimmers ISO17899:2004 Ships and marine technology - Marine electric window wipers 06.40 FDIS18072-1 Ships and marine technology-Ship Structures - Part1:General requirements for 08.27 their limit state assessment CD18072-2 Ships and marine technology-Ship Structures- Part2 : Requirements for their 08.28 ultimate strength limit state assessment ISO18770:2005 Ships and marine technology - Machinery Space flammable oil systems - 03.47, IMO-link-NR 74 Guidelines to prevent leakage of flammable oil ISO18813:2006 Ships and marine technology - Survival equipment for survival crafts and 01.35, IMO-link-NR 18 rescue boats ISO19018:2004 Ships and marine technology - Terms, abbreviations and graphical symbols 09.24 and concepts on navigation ISO19019:2005 Ships and marine technology - Guide for planning, carrying out and reporting 09.25 sea trials ISO/DIS19292 Ships and marine technology - Point-type resetable flame detectors for ships 01.69 ISO19379:2003 Ships and marine technology - ECS databases - Content, quality, updating and 06.20 testing ISO19921:2005 Ships and marine technology - Fire resistance of gasketed mechanical 03.49 couplings for use in piping systems - Test methods

ISO19922:2005 Ships and marine technology - Fire resistance of gasketed mechanical 03.50 couplings for use in piping systems - Requirements imposed on the test bench ISO20672 Ships and marine technology-Rate of turn indicators 06.30, IMO-link-NR 67 ISO20673 Ships and marine technology-Electric rudder angle indicators 06.26, IMO-link-NR 67 ISO/DIS20858 Ships and marine technology - Maritime port facility security assessments and 11.03, IMO-link-NR 69 security plan development ISO PAS20858:2004 Ships and marine technology - Marine port facility security assessments and 11.03P, IMO-link-NR 81 security plan development ISO21005:2004 Ships and marine technology -Thermally toughened safety-glass panes for 08.25 windows and side scuttles CD21070 Ships and marine technology - Ships board handling of ship generated garbage 02.46 AWI21071 Ships and marine technology - Oil water separators 02.04, IMO-link-NR 91 FDIS21072-1 Ships and marine technology - Marine environmental protection- Performance 02.47 testing of oil skimmers-Part1: Moving water conditions FDIS21072-2 Ships and marine technology-Marine environmental protection-Performance 02.49 resting of oil skimmers-Part2: Static water conditions FDIS21072-3 Ships and marine technology-Marine environmental protection-Performance 02.50 Testing of oil skimmers-High viscosity oil ISO22090-1:2002 Ships and marine technology - Transmitting heading devices (THDs) - Part 1 : 06.22, IMO-link-NR 66 Gyro-compasses ISO22090-1:Cor1:2005 Ships and marine technology-Transmitting heading 06.22C, IMO-link-NR 66 Devices (THDs) - Part1:Gyro-compasses-Technical corrigendum1 ISO22090-2/Cor1:2005 Ships and marine technology-Transmitting Heading 06.28C, IMO-link-NR 66 Devices (THDs)-Part2:Geomagnetic principles-Technical corrigendum1 ISO22090-2:2004 Ships and marine technology - Transmitting Heading Devices (THDs) Part 2 : 06.28, IMO-link-NR 66 Geomagnetic principles ISO22090-3:2004 Ships and marine technology - Transmitting Heading Devices (THDs) Part 3 : 06.29, IMO-link-NR 66 GNSS principles ISO22090-3/Corl:2005 Ships and marine technology-Transmitting Heading Devices(THDs)-Part3:GNSS 06.29C, IMO-link-NR 66 principles- Technicalcorrigendum1 ISO22472:2006 Ships and marine technology - Guideline for the operation and installation of 06.35, IMO-link-NR 70


page 61

Index Standard Number Standard Title work item IMO-link-NR voyage data recorder (VDR) DIS22488 Ships and marine technology - Shipboard firefighters' outfits ( Protective 01.55, IMO-link-NR 76 clothing, gloves, boots, and helmets ) ISO22554:2007 Ships and marine technology - Propeller shaft revolution indicators - Electric 06.27, IMO-link-NR 67 type and electronic type ISO22555:2007 Ships and marine technology - Propeller pitch indicator 06.31, IMO-link-NR 67 FDIS22673 Ships and marine technology-Launching appliances for free-fall lifeboats 04.30 ISO/PAS22853:2005 Ships and marine technology - computer applications specifications MSML 10.21P (Marine Safety Mark-up Language) AWI23268 Ships and marine technology - Oil barriers - Test and certification 02.48 PRF23269-1 Ships and marine technology - Breathing apparatus for ships - Part 1 - 01.59, IMO-link-NR 76 Emergency escape breathing devices (EEBB) for ship-board use ISO/AWI23269-2 Ships and marine technology - Breathing apparatus for ships - Part 2 - 01.66, IMO-link-NR 76 Breathing apparatus for shipboard firefighters

ISO/AWI23269-3 Ships and marine technology - Breathing apparatus for ships - Part 3 - 01.67, IMO-link-NR 76 Self-contained breathing apparatus (safety equipment) required for IMO IBC and IGC Codes ISO/AWI 23269-4 Ships and marine technology - Breathing apparatus for ships - Part 4 : 01.68, IMO-link-NR 76 Self-contained breathing apparatus for emergency escape required by the IMO IBC and IGC Codes ISO24408:2006 Ships and marine technology - Position-indicating lights for life-saving 01.60, IMO-link-NR 66 appliances - Testing, inspection, and marking of production units ISO/NP24409-1 Ships and marine technology - Design, location, and use of shipboard signs for 01.45 fire protection, life-saving appliances, and means of escape ISO/AWI24409-2 Ships and marine technology-Design, location, and use of shipboard signs for 01.70 fire protection, life-saving appliances, and means of escape-Code of practice ISO/AWI 24409-3 Ships and marine technology - Design, location, and use of shipboard signs for 01.71 fire protection, life-saving appliances, and means of escape- Code of practice DIS24432 Ships and marine technology - Thermal protective aids with sleeves 01.57 PRF25861 Ships and marine technology - Daylight signalling lamps 06.33, IMO-link-NR 89 CD25862 Ships and marine technology-Marine magnetic compasses, azimuth reading 06.32 devices and binnacles for steering ISO/AWI27991 Marine evacuation systems-Means of communication 01.61 ISO/AWI27992 Ships and marine technology-Marine evacuation systems-Means of communication ISO/AWI27993 Guidelines for development of instructions for action in survival craft 01.73 ISO/AWI27994 Ships and marine technology-Standard operating method for pyrotechnic 01.76 distress signals ISO/AWI27995 Fixed aerosol fire extinguishing systems for ships 01.65 DIS28000 Specification for security management systems for the supply chain 00.01, IMO- link-NR 69 PAS28000:2005 Specification for security management systems for the supply chain 00.01P, IMO-link-NR 69 ISO/DIS28001 Security management systems for the supply chain-Best Practices for 11.04, IMO-link-NR 69 implementing supply chain security - Assessments and plans requirements and guidance ISO PAS28001:2006 Security management systems for the supply chain-Best practices for 11.04P, IMO-link-NR 69 implementing supply chain security-Assessments and plans ISO28003 Security management systems for the supply chain-Requirements for the bodies 00.03, IMO-link-NR 69 providing audit and certification of supply chain security management systems PAS28003:2006 Security management systems for the supply chain-Requirements for bodies 00.03P, IMO-link-NR 69 providing audit and certification of security management systems DIS28004 Security management systems for the supply chain -- Guidelines for the 00.02, IMO-link-NR 69 implementation of ISO/PAS 28000 PAS28004:2006 Security management systems for the supply chain - Guidelines for the 00.02P, IMO-link-NR 69 implementation of ISO\PAS28000 AWI28005 Ships and marine technology - Electronic port clearance 10.22, IMO-link-NR 88


Index Standard Number Standard Title work item IMO-link-NR ISO/CD28520 Ships and marine technology - Lubricating oil systems - Guidance for grades of 03.43 cleanliness and flushing ISO/CD28521 Ships and marine technology - Hydraulic oil systems - Guidance for grades of 03.44, IMO-link-NR 33 cleanliness and flushing

ISO/CD28522 Ships and marine technology - Hydraulic oil systems - Guidance for assembling 03.45 and flushing ISO/CD28523 Ships and marine technology - Sampling from lubricating oil and hydraulic oil 03.46 systems - Guidance for sampling of representative samples for determination of degree of cleanliness and for solid particle contamination ISO/CD29501 On-shore Power Supply, 'Cold ironing' 03.67, IMO-link-NR 86 IEC62065:2002 Maritimes navigation and radiocommunication equipment and systems - Track 06.18, IMO-link-NR 59 control systems - Operational and performance requirements methods of testing and required test results


page 63

Annex D The allocation of the numbers of work items to the Sub Committees

is as follows:(between brackets: number of revisions)

TC8 / WG TC8 / Sub committee

Published Standards Work items

Registered Possible new work items Total

TC 8/WG 1 Ships recycling 8 3 11

TC8/WG2 Security Management 5 1 1

SC 1 Lifesaving and Fire Protection 17 (11) 20 (3) 20 40 (3)

SC 2 Environment 2 8 18 26 SC 3 Piping/machinery 41 8 22 (9) 30 (12) SC 4 Outfitting 25 3 12 (7) 15 (7) SC 6 Navigation 33 5 (2) 3 8 (3) SC 7 Inland vessels 44 0 1 1 SC 8 Structures 21 2 5 7 SC 9 General 9 0 10 10

SC 10 Computer applications 17 2 (PAS)

1 (PAS) 2 2

1 (PAS)

SC 11 Intermodal and short sea shipping 2 (PAS) 2 0 0

SC12 Large Yachts 0 4 0 4

ISO 214 PAS 4

61 (5) 1 (PAS)

96 (16) 157 (31)

1 (PAS)


Annex E The IMO-link-NR's are assigned to the ISO/TC 8 Subcommittees and IMO bodies

as follows:

TC 8 IMO Res.

MSC (SOLAS) FP DE NAV SLF COMS MEPC BLG FAL

TC8/ WG1 WG2

69 xxx

SC 1

23, 54, 55, 56, 57, 58, 71, 72, 73, 75, 76, 77, 78, 79, 80, 82

16, 17, 20, 27, 46, 76

9, 14, 18, 19, 37, 74

43

SC 2 21, 22, 52, 91 22

SC 3 2, 24, 25, 26 33, 45 2, 13, 45,

47, 63 86

SC 4 49 68 28, 38, 62

SC 6 47, 48, 60

1, 5, 59, 61, 66, 70, 84, 85, 89

39

1, 5, 6, 10, 11, 15, 67,

90

4

SC 7 SC 8 3, 8, 3, 32, 34 40

SC 9 7, 50 23, 31, 35, 58 36, 87 41

SC 10 51 30 43 88 SC11 69

IMO International Maritime Organization—Resolution, etc. MSC Maritime Safety Committee—including SOLAS Code FP Fire Protection-- including Code DE Design and equipment—including Code NAV Safety of Navigation—including Code SLF Stability and Loadlines and Fishing vessels Safety COMS Radio communication and Search and Rescue MEPC Marine Environment Protection Committee BLG Bulk Liquids and Gases FAL Facilitation


page 65

Annex F Explanation of current stage abbreviation

Stage Abbreviation Description

00

Preliminary Stage

PWI PWI TS PWI Amd

Preliminary Work Item for anew International Standard or a revision Preliminary Work Item for a Technical Specification Preliminary Work Item for an Amendment

10

Proposal Stage

NP NP Amd NP Cor. NP TS NP Suppl.

New Work Item Proposal for a new International Standard or a revision New Work Item Proposal for an Amendment New Work Item Proposal for a Technical Corrigendum New Work Item Proposal for a Technical Specification New Work Item Proposal for a Supplement

20.00

AWI AWI Amd AWI TR or TS

Approved Work Item for anew International Standard or a revision, no working draft yet available. Approved proposal for an Amendment, nor working draft yet available Approved proposal for an Technical Report or Technical Specification, no working draft yet available.

20 Preparatory

Stage

20.20 WD WD Amd WD TR or TS

Working Draft of a new International Standard or a revision Working Draft of an Amendment Working Draft of a Technical Report or Technical Specification

30

Committee Stage

CD CD Amd CD Cor. CD TR or TS CD Suppl. DTR or TS

Committee Draft of a new International Standard or a revision Committee Draft of an Amendment Committee Draft of a Technical Corrigendum Committee Draft of a Technical Report or Technical Specification Committee Draft of a Supplement Draft Technical Report or Draft Technical Specification

40 Enquiry Stage

DIS D Amd

Draft International Standard (new International Standard or a revision) Draft Amendment

50 Approval

Stage

FDIS FDAmd PRF PRF Amd PRF TR or TS PRF Suppl.

Final Draft International Standard (new International Standard or a revision) Final Draft Amendment Proof of a new International Standard or of a revision Proof of an Amendment Proof of a Technical Report or Technical Specification Proof of a Supplement

60

Publication Stage

ISO ISO/TR ISO/TS Amd. Cor.

International Standard (Includes revisions) Technical Report Technical Specification Amendment Technical Corrigendum

90 Review Stage

Series of codes reserved for actions relating to already published ISO standards, etc. (see ISO/IEC Directives, Part 1, annex H.1, 1995 for a complete list and descriptions)


Matrix presentation of project stages SUB-STAGE

00 20 60 90 Decision

STAGE

Registration Start of main action

Completion of main action

92 Repeat

an earlier phase

93 Repeat current phase

98 Abandon

99 Proceed

00 Preliminary

stage

00.00 Proposal for new project

received

00.20 Proposal for new project

under review

00.60 Review

summary circulated

00.98 Proposal for new project abandoned

00.99 Approval to

ballot proposal for new project

10 Proposal

stage

10.00 Proposal for new project registered

10.20 New project

ballot initiated

10.60 Voting

summary circulated

10.92 Proposal

returned to submitter for

further definition

10.98 New project

rejected

10.99 New project approved

20 Preparatory

stage

20.00 New project registered in TC/SC work programme

20.20 Working

draft (WD) study

initiated

20.60 Comments summary circulated

20.98 Project deleted

20.99 WD

approved for registration

as CD

30 Committee

stage

30.00 Committee draft (CD) registered

30.20 CD

study/ballot initiated

30.60 Comments/

voting summary circulated

30.92 CD referred

back to Working Group


30.99 CD

approved for registration

as DIS

40 Enquiry

stage

40.00 DIS

registered

40.20 DIS ballot initiated: 5 months

40.60 Voting

summary dispatched

40.92 Full report circulated:

DIS referred back to TC or

SC

40.93 Full report circulated: decision for new DIS

ballot


40.99 Full report circulated:

DIS approved for registration as FDIS

50 Approval

stage

50.00 FDIS

registered for formal

approval

50.20 FDIS ballot initiated: 2 months. Proof sent

to secretariat

50.60 Voting

summary dispatched.

Proof returned by secretariat

50.92 FDIS referred back to TC or

SC


50.99 FDIS

approved for publication

60 Publication

stage

60.00 International

Standard under

publication

60.60 International

Standard published

90 Review stage

90.20 International

Standard under

periodical review

90.60 Review

summary dispatched

90.92 International Standard to be revised

90.93 International

Standard confirmed

90.99 Withdrawal

of International

Standard proposed by

TC or SC

95 Withdrawal

stage

95.20 Withdrawal

ballot initiated

95.60 Voting

summary dispatched

95.92 Decision not to withdraw International

Standard

95.99 Withdrawal

of International

Standard


page 67

Annex G Participation table

TC8 Country Member body Australia (SAI) SA P 2005-09-06 Austria (ON) ON O Belgium (IBN) IBN O Brazil (ABNT) ABNT O Bulgaria (BDS) BD O Canada(SCC) SCC O 2005-09-29 China (SAC) SAC P Croatia (DZNM) DZNM O Cuba (NC) NC P Czech Republic (CNI) CNI P Denmark (DS) DS P Finland (SFS) SFS O France (AFNOR) AFNOR O Germany (DIN) DIN P Greece (ELOT) ELOT O Hong Kong (ITCHKSAR) ITCHKSAR O Hungary (MSZT) MSZT O India (BIS) BIS P Indonesia (BSN) BSN O Iran, Islamic Republic of (ISIRI) ISIRI P Ireland(NSAI) NSAI O Israel (SII) SII P 2005-06-14 Italy (UNI) UNI P Japan (JISC) JISC S Korea, Dem. P. Rep.of (CSK) CSK O Korea, Republic of (KATS) KATS P Netherlands (NEN) NEN P Norway (SN) SN P Pakistan (PSQCA) PSQCA O Panama( COPAINT) COPAINT P Poland (PKN) PKN P Portugal (IPQ) IPQ O 2006-10-18 Romania (ASRO) ASRO P Russian Federation (GOST R) GOST R P Serbia and Montenegro(ISSM) ISSM O Singapore (SPRING SG) SPRING SG P 2005-08-15 Slovakia (SUTN) SUTN O Spain (AENOR) AENOR P Sweden (SIS) SIS P Thailand (TISI) TISI O Tunisia (INNORPI) INNORPI O Turkey (TSE) TSE P Ukraine (DSSU) DSSU P United Kingdom (BSI) BSI P Uruguay (UNIT) UNIT O USA (ANSI) ANSI P Viet Nam (TCVN) TCVN O

ISO/TC8 N1000 R12 Status report page 68 SC 1 Country Member body Australia (SAI) SAI O Austria (ON) ON O Belgium (IBN) IBN P Bulgaria (BDS) BDS O Canada(SCC) SCC P 2005-09-29 China (SA\C) SAC P Croatia (DZNM) DZNM O Cuba (NC) NC O Czech Republic (CSNI) CSNI O Denmark (DS) DS P Finland (SFS) SFS O France (AFNOR) AFNOR O Germany (DIN) DIN P Greece (ELOT) ELOT O India (BIS) BIS P Israel (SII) SII O Italy (UNI) UNI P Japan (JISC) JISC P Korea, Republic of (KATS) KATS P Netherlands (NEN) NEN P Norway (SN) SN O Pakistan (PSQCA) PSQCA O Poland (PKN) PKN O Portugal (IPQ) IPQ P Romania (ASRO) ASRO O Russian Federation (GOST R) GOST R P Slovakia (SUTN) SUTN O Spain (AENOR) AENOR O Sweden (SIS) SIS P Switzerland (SNV) SNV O Turkey (TSE) TSE O Ukraine (DSSU) DSSU P United Kingdom (BSI) BSI P USA (ANSI) ANSI S


page 69 SC 2 Country Member body Bulgaria (BDS) BDS O China (SAC) SAC P Croatia (DZNM) DZNM O Cuba (NC) NC O Denmark (DS) DS O France (AFNOR) AFNOR O Finland (SFS) SFS P Germany (DIN) DIN P India (BIS) BIS O Italy (UNI) UNI P Japan (JISC) JISC P Korea, Republic of (KATS) KATS P 2006-02-24 Netherlands (NEN) NEN P Norway (SN) SN O Poland (PKN) PKN O Portugal (IPQ) IPQ P Romania (ASRO) ASRO O Russian Federation (GOST R) GOST R P Slovakia (SUTN) SUTN O Spain (AENOR) AENOR O Ukraine (DSSU) DSSU O United Kingdom (BSI) BSI P USA (ANSI) ANSI S SC 3 Country Member body Brazil (ABNT) ABNT O Bulgaria (BDS) BDS O China (SAC) SAC P Croatia (DZNM) DZNM O Cuba (NC) NC O Denmark (DS) DS P France(AFNOR) AFNOR O Germany (DIN) DIN P India (BIS) BIS O Italy (UNI) UNI P Japan (JISC) JISC P Korea, Republic of (KATS) KATS P Netherlands (NEN) NEN P Norway (SN) SN O Poland (PKN) PKN O Portugal (IPQ) IPQ P Romania (ASRO) ASRO O Russian Federation (GOST R) GOST R P Slovakia (SUTN) SUTN O Spain (AENOR) AENOR O Switzerland (SNV) SNV P Ukraine (DSSU) DSSU P United Kingdom (BSI) BSI P USA (ANSI) ANSI S

ISO/TC8 N1000 R12 Status report page 70 SC 4 Country Member body Austria (ON) ON O Belgium (IBN) IBN O Bulgaria (BDS) BDS O China (SAC) SAC S Croatia (DZNM) DZNM O Cuba (NC) NC P Czech Republic (CSNI) CSNI O Denmark (DS) DS O Finland (SFS) SFS O France(AFNOR) AFNOR O Germany (DIN) DIN P Greece (ELOT) ELOT O India (BIS) BIS O Italy (UNI) UNI P Japan (JISC) JISC P Korea, Dem. P. Rep. of (CSK) CSK P Korea, Republic of (KATS) KATS P Netherlands (NEN) NEN P Norway (SN) SN O Pakistan (PSQCA) PSQCA O Poland (PKN) PKN O Portugal (IPQ) IPQ O Romania (ASRO) ASRO P Russian Federation (GOST R) GOST R P Slovakia (SUTN) SUTN O Spain (AENOR) AENOR O Turkey (TSE) TSE O Ukraine (DSSU) DSSU P United Kingdom (BSI) BSI P USA (ANSI) ANSI P


page 71 SC 6 Country Member body Belgium (IBN) IBN O Bulgaria (BDS) BDS O China (SAC) SAC P Croatia (DZNM) DZNM O Cuba (NC) NC O Denmark (DS) DS O Finland (SFS) SFS P France (AFNOR) AFNOR O Germany (DIN) DIN P Hungary (MSZT) MSZT O Israel (SII) SII O India (BIS) BIS O Italy (UNI) UNI P Japan (JISC) JISC S Korea, Republic of (KATS) KATS P Netherlands (NEN) NEN P Norway (SN) SN O Poland (PKN) PKN O Portugal (IPQ) IPQ O Romania (ASRO) ASRO P Russian Federation (GOST R) GOST R P Slovakia (SUTN) SUTN O Spain (AENOR) AENOR O Ukraine (DSSU) DSSU O United Kingdom (BSI) BSI P USA (ANSI) ANSI P SC 7 Country Member body Austria (ON) ON O Belgium (IBN) IBN O Brazil (ABNT) ABNT O Bulgaria (BDS) BDS O China (SAC) SAC P Croatia (DZNM) DZNM O Cuba (NC) NC P Czech Republic (CSNI) CSNI P Denmark (DS) DS O Germany (DIN) DIN P India (BIS) BIS P Italy (UNI) UNI P Japan (JISC) JISC O Korea, Dem. P. Rep. of (CSK) CSK O Korea, Republic of (KATS) KATS P Netherlands (NEN) NEN O Poland (PKN) PKN O Portugal (IPQ) IPQ O Romania (ASRO) ASRO P Russian Federation (GOST R) GOST R S Slovakia (SUTN) SUTN O Spain (AENOR) AENOR O Ukraine (DSSU) DSSU O United Kingdom (BSI) BSI P USA (ANSI) ANSI P

ISO/TC8 N1000 R12 Status report page 72 SC 8 Country Member body Australia (SAI) SAI O Belgium (IBN) IBN P Bulgaria (BDS) BDS O China (SAC) SAC P Croatia (DZNM) DZNM O Cuba (NC) NC O Denmark (DS) DS O Finland (SFS) SFS P France (AFNOR) AFNOR P Germany (DIN) DIN P Greece (ELOT) ELOT O India (BIS) BIS P Italy (UNI) UNI P Japan (JISC) JISC P Korea, Republic of (KATS) KATS S Netherlands (NEN) NEN P Norway (SN) SN O Poland (PKN) PKN O Portugal (IPQ) IPQ P Romania (ASRO) ASRO O Russian Federation (GOST R) GOST R P Serbia and Montenegro(ISSM) ISSM O Singapore (SPRING SG) SPRING SG P Slovakia (SUTN) SUTN O Spain (AENOR) AENOR O Turkey (TSE) TSE P Ukraine (DSSU) DSSU P United Kingdom (BSI) BSI P USA (ANSI) ANSI P


page 73 SC 9 Country Member body Austria (ON) ON O Bulgaria (BDS) BDS O China (SAC) SAC P Croatia (DZNM) DZNM O Cuba (NC) NC O Czech Republic (CNI) CNI O Denmark (DS) DS O Finland (SFS) SFS O France(AFNOR) AFNOR O Germany (DIN) DIN P India (BIS) BIS O Italy (UNI) UNI P Japan (JISC) JISC S Korea, Republic of (KATS) KATS P Netherlands (NEN) NEN P Norway (SN) SN O Poland (PKN) PKN P 2006-10-18 Portugal (IPQ) IPQ P Romania (ASRO) ASRO O Russian Federation (GOST R) GOST R P Slovakia (SUTN) SUTN O Spain (AENOR) AENOR O Turkey (TSE) TSE P Ukraine (DSSU) DSSU O United Kingdom (BSI) BSI P USA (ANSI) ANSI P

ISO/TC8 N1000 R12 Status report page 74 SC 10 Country Member body Belgium (IBN) IBN O Bulgaria (BDS) BDS O China (SAC) SAC P Croatia (DZNM) DZNM O Cuba (NC) NC P Denmark (DS) DS O Finland (SFS) SFS O France (AFNOR) AFNOR O Germany (DIN) DIN P India (BIS) BIS P Italy (UNI) UNI O Japan (JISC) JISC P Korea, Republic of (KATS) KATS P Netherlands NEN O Norway SN S Panama COPAINT P Poland PKN O Portugal IPQ P Russian Federation GOST R P Slovakia SUTN O Spain AENOR O Sweden SIS P Turkey TSE O Ukraine DSSU O United Kingdom BSI P USA ANSI P


page 75 SC 11 Country Member body Belgium (NBN) NBN P Bulgaria (BDS) BDS P China (SAC) SAC O Croatia (DZNM) DZNM O Cuba (NC) NC P Czech Republic (CSNI) CSNI O Denmark (DS) DS P Finland (SFS) SFS O France (AFNOR) AFNOR P Germany (DIN) DIN P Greece (ELOT) ELOT O India (BIS) BIS P Israel (SII) SII O Italy (UNI) UNI P Japan (JISC) JISC P Korea, Republic of (KATS) KATS P Netherlands (NEN) NEN P Norway (SN) SN O Pakistan (PSQCA) PSQCA O Poland (PKN) PKN O Portugal (IPQ) IPQ P Romania (ASRO) ASRO P Russian Federation (GOST R) GOST R P Serbia and Montenegro(ISSM) ISSM O Singapore (SPRING SG) SPRING SG P Spain (AENOR) AENOR S Sweden(SIS) SIS P 2005-04-08 Turkey (TSE) TSE O Ukraine (DSSU) DSSU O United Kingdom (BSI) BSI P USA (ANSI) ANSI P

ISO/TC8 N1000 R12 Status report page 76 SC 12 Country Member body Australia SA P Belgium IBN P China SAC P Czech Republic CNI O France AFNOR P Germany DIN P India BIS P Israel SII P Italy UNI S Japan JISC O Netherlands NEN P Russian Federation GOST R O Spain AENOR O Ukraine DSSU O United Kingdom BSI P USA ANSI P


page 77

Annex H Sub Committee Chairman/Secretary

Sub Committee Title Chairman/Secretary Memberbody E-mail ISO/TC 8 Ships and marine technology USA [email protected] Charles H. Piersall SAC, China [email protected] Yanqing Li ISO/TC 8/AG ISO/TC 8 Advisory Group USA [email protected] Charles H. Piersall ISO/TC 8/SC 1 Lifesaving and fire protection Italy [email protected] Claudio Abbate ANSI, USA [email protected] George Grills ISO/TC 8/SC 2 Marine environment protection Japan [email protected] Koichi Yoshida ANSI, USA [email protected] Patnaik Bivan ISO/TC 8/SC 3 Piping and machinery USA [email protected] Joseph A. Byrne ANSI, USA [email protected] Thane Gilman ISO/TC 8/SC 4 Outfitting and deck machinery China [email protected] Xiaochuan Tong SAC, China [email protected] Zhen Liu ISO/TC 8/SC 6 Navigation Japan [email protected] Shogo Hayashi JISC, Japan [email protected] Kosei Hasegawa ISO/TC 8/SC 7 Inland navigation vessels Russian Fed. [email protected] Yuri N. Rumiantev GOST R, Russian Fed. [email protected] Vladimir Y. Beylinson ISO/TC 8/SC 8 Structures Rep. of Korea [email protected] Jeong Je Kim KATS, Rep of Korea [email protected] Byeong Cheol Choi ISO/TC 8/SC 9 General requirements Japan [email protected] Tsuyoshi Yahagi JISC, Japan [email protected] Yoshihito Tominaga ISO/TC 8/SC10 Computer applications Norway [email protected] Ørnulf Jan Rødseth SN, Norway [email protected] Jan Frank Ulvås ISO/TC 8/SC11 Intermodal and short sea shipping Rep. of Korea [email protected] Jae Wook Lee AENOR, Spain [email protected] Luz Smith Rodriguez ISO/TC 8/SC12 Large Yachts Italy [email protected] Luigi Scarpati UNI, Italy [email protected] Emilio Tremolada

mailto:[email protected]














Annex I Liaison list for ISO/TC 8 and TC 8 Subcommittees

Committee TC 8

Organization IMO ISO/TC 28 ISO/TC 67 ISO/TC 108 ISO/TC 154 ISO/TC 184 ISO/TC 204 CEN/TC 15 EC IACS IAPH ILO IMPA SNAME INTER TANKO ICS WCO WSC ITN ICOMIA IFIA ISMA IMSO

Category A A A A A A A A A A A A A A A A A A A A A A A

Recipient ANSI, API Washington ANSI, API Washington DIN

TC 8/SC 1

ISO/TC 21 ISO/TC 92/SC 1

BSI BSI

ISO/TC 94 ISO/TC 145/SC 2

SAA DIN

ISO/TC 188 SIS – SMS Askebro IACS A

ICOMIA IMO (FP)* ITN IMPA

A A A A

EMSA B TC 8/SC 2

TC 146 DIN TC 147 DIN TC 207 SCC IMO (MEPC)* A OCIMF A ICS A INTERTANKO A ITN A TC 8/SC 3

IEC/TC 18 A

TC 10/SC 10 TC 67/SC 6 SIS – SMS Askebro

AFNOR TC 70 BSI


page 79 TC 138 TC 192

JISC ANSI

IACS A

IMO (DE)* SNAME (SMC) ITN

A A A

TC8 /SC 4

TC 22 AFNOR – BNA TC 96/SC 8 BSI-SCC TC 178/WG 1 AFNOR

TC 67/SC 7 IMO (DE) IACS

A B

ITN A

TC 8/SC 6

IEC/TC 80 A CIRM A IALA A IMO (NAV)* A

ITU ITN WSC

A A

TC 8/SC 7

TC 188 SIS – SMS Askebro IEC/TC 18 A CEN/TC 15 A CCR A CD A CIPA A IADC A

UN/ECE IACS

A B

TC 8/SC 8

TC 35 TC 67/SC 7 TC 108 TC 156 IACS IMO (BLG)* ITN

A A A

NEN BSI ANSI GOST-R

TC 8/SC 9

IACS B ITN A WSC A TC 8/SC 10

TC154 TC184 AFNOR

TC184/SC4 TC204 ANSI – NIST/MSID/ANSI – DISA

ANSI IEC/TC18 A IEC/TC80 A

IACS ITN EMSA

B A B

ISO/TC8 N1000 R12 Status report page 80 TC 8/SC 11

TC22 AFNOR

TC104 TC145 ANSI

BSI TC204 ANSI IEC/TC18 A

IMO (FAL/SPI)* EC-DGET

A A

PIANC ICHCA ITN

A A A

TC 8/SC 12

ICOMIA A • IMO *: Any SCs who need to deal with IMO Matters must go exclusively via the Chairman to insure

coordination and integration within ISO/TC8 and all SCs. • In each case where a SC needs liaison with an external body or other TC, the coordination will be through

the TC or SC named as principal interface in this document. This document establishes the "lead SC /TC concept" where we will insure a coordinated and unified TC8 position. Any liaison difficulties arising will be referred to the Chairman, ISO/TC8 for resolution.

Draft_2009

Documents

Transcript of Draft_2009