Cable Management Solutions - Leviton · ladder rack / unistrut mounting Kit Fiber Cable Management...

Cable Management SolutionsCable Management Solutions

2 leviton.com | 800.722.2082 technical Questions? call Tech Support at 800.824.3005

cable management solutions

3 technical Questions? call Tech Support at 800.824.3005 leviton.com | 800.722.2082

cable management solutions

vertical cable management• versi-Duct® 8" and 5" systems fit on any standard equipment rack, enabling smooth transition from horizontal panels and equipment

• vertical transition rings are compatible with flat and angled panels

fiber raceway system• this adaptable system with a vast selection of components, fits any environment

horizontal cable management• versi-Duct horizontal cable management finger spacing aligns with patch panel port openings to better manage patch cords

• horizontal D-ring managers mount above or below patch panels and support transition to vertical management

• blank panels and transitional covers fill in rack space next to patch panels to provide a seamless look and improve thermal management

rear cable management bars

• standard flat rear bars attach directly to flat and recessed flat patch panels

• high-density flat rear bars mount on the front and rear of racks and cabinets to support heavy loads of cable

• angled and recessed angled rear bars mount to the back of racks and cabinets adjacent to corresponding patch panels

velcro® branD cable management

• organizes cables without pinching and stressing copper or fiber cabling

Simplify Installations & Eliminate Clutterleviton’s cable management solutions work hand-in-hand with our large selection of industry leading patch panels. the following combinations will better organize and streamline rack space.

rear

bar

s, r

in

gs & brackets

Pg 9

velcr

o® b

rand

cable management

Pg 10-11

horiz

onta

l cab

le management

Pg 8

Pg 7

fibe

r ra

cew

ay

Pg 4-6

8" &

5"

vers

i-D

uct® systems


features

• injection molded products eliminate sharp edges and protect cable integrity

• Durable abs plastic channels withstand years of use in demanding environments

• large finger pass-through space aligns with rack units

• included cover features unique, integrated dual-hinge for easy accessibility

• 80" channel ships in two 40" pieces for easier handling and installation

• front only or front/rear configurations

• channels kitted with Pvc plastic cover, slack spools, cable retainers and mounting brackets

• same channels can be easily adapted for side or center mount applications

• rack-mount brackets snap into vertical channel with no additional hardware required

8" versi-duct® vertical cable management

Front & rear w/ designer cover (40" section shown) 8c80l-vfr

{ }See Our

COMPLETEORDERING

GUIDEPg 12-15

8" Channel Cable Management since cat 6a installations typically include larger diameter cable and density is an issue, leviton now offers an 8" versi-Duct vertical cable management system, developed for use in today’s large scale deployments.

Rounded, dual hinge

cable concealing cover

provides a clean,

sleek look

Designer CoverDual hinge allows

covers to be opened

from both sides

Hinge


cable retainer 89265-wr1

slack loop organizer 89265-sl1

Front only, 80" w/ designer cover (40" section shown) 8c80l-vfo

Stores cable slack

and maintains

proper bend radius

for CAT 6A cables

Slack LoopSnaps into multiple

positions along

channel fingers to

secure cable bundles

Cable Retainer

8.50"

6.90"

17.50"

8.75"

featurechannel Depth (wxD)

area (in2)

cat 6a capacity

(.354" cable)

cat 6 capacity

(.250" cable)

cat 5e capacity

(.180" cable)

8" Channel Size (per side) 8"x 8" 60 192 384 738

Finger Spacing 5.5" x 1" 5.5 24 60 114

Large Passthrough 4.8" x 2.6" 12.7 72 120 258

Small Passthrough 2.6" x 2.6" 6.8 36 72 138

8" Versi-Duct Capacitythe chart below references the maximum recommended capacity of cable allowed for the installation based on the outside cable diameter. allowances should be made for proper bend radius and future additions.

Front & rear, 80"


{ }See Our

COMPLETEORDERING

GUIDEPg 12-15

Designer cover, snap-on, grey 59265-5Dc

5" versi-duct® vertical cable management

5" Channel Cable Management the 5" versi-Duct vertical cable management system is ideal for smaller and more flexible installations. Designed for telecommunication closets and as end caps on equipment racks, this solution provides a durable method for routing and managing cabling infrastructure.

Front & rear, 80"

5.40"

3.90"

11.60"

5.80"

Front only / Front & rear, 40" w/ standard snap-on black cover 4940l-vfo / 4940l-vfr

mounting brackets 49265-bKt

features

• injection molded products eliminate sharp edges and protect cable integrity

• Durable abs plastic channels withstand years of use in demanding environments

• 80" channel ships in two 40" pieces for easier handling and installation

• finger spacing aligns with rack units

• snap-on cable concealing covers

• front only and front/rear configurations

Finger SpacingLarge finger spacing creates flexibility in patch cord routing

featurechannel Depth (wxD)

area (in2)

cat 6a capacity

(.354" cable)

cat 6 capacity

(.250" cable)

cat 5e capacity

(.180" cable)

5" Channel Size (per side) 5"x 4" 20 60 126 246

5" Versi-Duct Capacitythe chart below references the maximum recommended capacity of cable allowed for the installation based on the outside cable diameter. allowances should be made for proper bend radius and future additions.


fiber raceway

radius guide shown with ducting (ducting sold separately)

side Drop-off Kit for Duct raceway

suspension Kit w/ 3' 3" rod raised mounting Kit for above or below cabinet

ladder rack / unistrut mounting Kit

Fiber Cable Management route, protect and store fiber cabling with leviton’s fiber raceway system, the easy to design, easy to configure, easy to install cable management system. for use in data centers, central offices, headends and wiring closets, this versatile system provides a safe, dedicated path for mission critical network cabling.

ul 2024a riser rated For installation in telecommunication Facilities

leviton’s Fiber raceway is compliant with and listed to ul 2024a—optical Fiber cable

routing assemblies for use in telecommunication installations. it has been evaluated,

tested and approved for installation in riser applications in accordance with the national

electric code and general purpose applications.

features

• Ducting is ideal for routing and supporting cables throughout fiber networks

• 6.5' sections can be hand cut to fit exact specifications

• available in five sizes with regular or hinged covers

• slotted ducting ideal for cable with varying exit locations

• bend radius guides used with slotted ducts safely route fiber

• available in four colors, as shown below

For more information and a complete list of raceway parts, refer to leviton’s structured cabling and Power solutions catalog or Fiber raceway system brochure.

customer service at +1.425.486.2222 for sales outside the usa.

Slotted Duct

Solid Duct & Hinged Cover

Solid Duct & CoverBlack

Grey

Orange

Yellow


{ }See Our

COMPLETEORDERING

GUIDEPg 12-15

1ru recessed angled, 4" rings 4w254-lPm

Flat w/ metal cover, 4" rings 4925c-bcm

1ru recessed Flat 49253-rcm

2ru Flat combo Front and rear 49252-Pcm

BLaNk PaNEL INSERTS

• Provide a seamless look and designate rack space for future expansion

• available for flat, angled, and recessed angled Patch Panels

VERSI-DUCT® HORIzONTaL CaBLE MaNaGEMENT

• fit all standard 19" racks and cabinets

• include bend radius compliant clips

• large finger spacing creates flexibility in patch cord routing

horizontal cable management

2ru Front & rear / Front only 492ru-hfr / 492ru-hfo

1ru Front only / Front & rear 491ru-hfo / 491ru-hfr

2ru Designer cover, snap-on, grey 49265-Dc2

cable retainer / cover Hinge 49265-wr1 / 49265-hng

Horizontal Cable Management & Accessoriesmake more efficient use of rack space with leviton’s horizontal cable managers. these solutions adjust to varying requirements and protect cabling to ensure continual system integrity.

TRaNSITIONaL COVERS

• Provide clean, aesthetic transition from angled Patch Panels to flat equipment

• available for angled and recessed angled Patch Panels

HORIzONTaL CaBLE MaNaGERS

• available in 1ru, 2ru and 4ru sizes

• all mount to standard 19" racks and cabinets

• 4ru manager includes a shelf to support patch cords

• combo managers offer front and rear management

1ru / 2ru / 4ru blank Panels 49254-bP1 / 49254-bP2 / 49254-bP4

1ru angled / recessed angled transitional cover 49254-bc1 / 4w254-bc1

Mount above or below patch panels

to organize cables horizontally

D-Rings


{ }See Our

COMPLETEORDERING

GUIDEPg 12-15

Flat High Density 49005-Dmb

REaR CaBLE MaNaGEMENT BaRS

• standard cable management bars available in flat, angled, and recessed angled options

• extended cable management bar handles large cable volumes and includes six velcro® brand straps

• rear cable management bar for active equipment offers extended depth for power cord support and cutouts for air circulation

rear bars, rings & bracKets

Flat 49005-cmb

recessed angled 4w006-amb

3" vertical rings / 6" vertical rings / mounting tie bracket 49260-mr3 / 49260-mr6 / 49261-bKt

vertical transition rings 49262-hr1

2ru Hinged wall-mount bracket 49251-w62

3ru Front Hinged bracket 49400-fhb

Angled 49006-amb

Rear Bars, Rings & BracketsDon’t get frustrated with the final steps of your project. in recognition of the unique applications and locations where space is constrained, these added components offer a reliable, cost effective alternative to traditional designs.

High-Density Manager

Die-cast aluminum supports heavy cable loads and mounts to front or rear of racks and cabinets

RINGS & BRaCkETS

• front hinged bracket simplifies terminating cables to rear of patch panels when access is limited

• vertical transition rings are compatible with all leviton patch panels

• hinged wall-mount brackets are designed for installations where space is constrained and racks are not used

• tie brackets allow rings to be center-mounted

An open ring solution is ideal for tight spaces and smaller deployments

Vertical Rings

Flat active equipment 41188-sm2


{ }See Our

COMPLETEORDERING

GUIDEPg 12-15

velcro® branD wraPs - bulK rolls

• available in 15, 75, and 600' bulk rolls, 0.5" width

• maroon products ul listed for use in plenum or air handling spaces per nec section 300

• cut to desired length

velcro® branD wraPs - softcinch lite rolls

• thinner material for smaller bundles

• tear by hand for quick application

• cut to desired length

• available in 75' roll, 0.5" width

velcro® branD comPression straPs

• available in 15" lengths, 0.5" width

• adjustable to support a variety of loads

• easy feedthrough slot helps secure fastening without over-tightening

• strap locked area equals 6 sq. inches

• Quick and sturdy adjustments and changes

VELCRO® BRaND TIE WRaPS

• available in 5, 8, and 12" lengths, 0.5" width

• slot helps secure fastening without over-tightening

• maroon products ul listed for use in plenum or air handling spaces per nec section 300

• all wraps come 25 units per roll

velcro® brand Fasteners

5" / 8" / 12" / tie wrap 43105-005 / 43108-008 / 43112-012

15' / 75' bulk roll 43115-015 / 43115-075

600' bulk roll 43115-600

15" compression strap 44115-15e

75' softcinch lite roll 4s115-75e

VELCRO® Brand Cable Managementleviton has expanded its selection of velcro® brand cable and utility fasteners. Plenum-ratedmaroon fasteners are now available for all tie wraps and 15- and 75-foot bulk rolls. in addition, we offer your choice of blue, yellow, orange and basic black for all velcro® brand tie wraps, bulk rolls, and compression straps. velcro® brand fasteners won’t kink cabling like plastic tie wraps can, making them an excellent choice for all your cable fastening needs.

velcro® is a registered trademark of velcro industries b. v.


storage rings, 11.75" diameter 48900-ifr

4 New ColorsAvailable Now!

saddle ties w/ 10/32 metal rack screws / saddle ties w/ #8 wood screws

41020-sPr / 41010-sPw

J Hook 46700-slg

compression strap 45224-rcs

workstation loops w/peel-off adhesive 41225-saP

Fasteners 41030-oft

VELCRO® BRaND UTILITy FaSTENERS

• saddle ties attach to wood surfaces, relay racks, and enclosures

• J hooks are height adjustable to bypass obstacles and open to 8" diameter

• compression straps provide the ideal solution for heavy vertical cable runs

• workstation loops, with 5.25" loop, attach with convenient peel-off adhesive

• orange fasteners hold cable bundles up to 3" diameter

• storage rings for inside and outside plant ensure fiber optic bend radius; loops included


{ }

{ }

VERSI-DUCT 8" CHaNNEL VERTICaL CaBLE MaNaGEMENT & aCCESSORIES

DescriPtion front only front & rear

Vertical 80" length, 8"W x 8"D channel w/ standard hinged black cover 8980L-VFO 8980L-VFR

Vertical 80" length, 8"W x 8"D channel w/ designer hinged grey cover 8C80L-VFO 8C80L-VFR

Vertical Center Mounting Bracket, 8" Channel 89265-BKT

Vertical Cable Retainer, 8" Channel 89265-WR1

Vertical Slack Loop Organizer, 8" Channel 89265-SL1

VERSI-DUCT 5" CHaNNEL VERTICaL CaBLE MaNaGEMENT & aCCESSORIES


Vertical 80" length, 5"W x 4"D Channel w/ standard snap-on black cover 4980L-VFO 4980L-VFR

Vertical 40" length, 5"W x 4"D Channel w/ standard snap-on black cover 4940L-VFO 4940L-VFR

Vertical Designer Cover, 5"Channel, snap-on, grey 59265-5DC

Mounting Bracket, 5" Channel 49265-BKT

VERSI-DUCT HORIzONTaL CaBLE MaNaGEMENT & aCCESSORIES


Horizontal Manager, 2RU, 3"W x 3"D front, 2"W x 4"D rear, w/ black cover* 492RU-HFO 492RU-HFR

Horizontal Manager, 1RU, 1.5"W x 3"D front, 1.5"W x 4"D rear, w/ black cover* 491RU-HFO 491RU-HFR

Horizontal Designer Cover, 2RU, snap-on, grey 49265-DC2

Horizontal Designer Cover, 1RU, snap-on, grey 49265-DC1

Horizontal Cable Retainer (10 per package) 49265-WR1

Horizontal Cover Hinge (4 per package) 49265-HNG

ordering guiDe

Pg 6

Pg 8

8" Front & Rear

Slack Loop Organizer

5" Mounting Brackets5" Front& Rear

2RUFront & Rear

2RU Snap-onDesigner Cover

Front Only

* Bend radius clips included

{ }Pg 4-5


blank panel inserts & transitional covers

DESCRIPTION FlaT aNglEDRECESSEDaNglED

Blank Panel, 1RU 49254-BP1 49254-BA1 4W254-BA1

Blank Panel, 2RU 49254-BP2 49254-BA2 4W254-BA2

Blank Panel, 4RU 49254-BP4

Transitional Cover, 1RU 49254-BC1 4W254-BC1

horizontal cable managers

DESCRIPTION flaTflaT w/ mETal COvER

aNglEDRECESSED aNglED

RECESSED flaT

Horizontal Manager, 1RU, 4" metal rings 49253-LPM 4925C-LPM 49254-LPM 4W254-LPM

Horizontal Manager, 2RU, 4" metal rings 49253-BCM 4925C-BCM 49254-BCM 4W254-BCM

Horizontal Manager, 2RU, 2" metal rings 49253-2CM

Horizontal Manager, 4RU, 4" metal rings 49253-4CM 4925C-4CM

Horizontal Manager, 4RU, 6" metal rings 49253-6CM 4925C-6CM

Recessed Horizontal Manager, 1RU, 3" metal rings

49253-RCM

Horizontal Manager, 2RU,w/ plastic saddles 49252-PO2

Horizontal Manager, 1RU, w/ plastic saddles 49252-PO1

Combo Front and Rear Manager, 2RU 49252-PCM

VELCRO® Brand Horizontal Manager, 1RU 41150-019

Tie Wrap Bar, 1"H x 1.5"D 49258-TWB

SpaceMaker Cable Manager 41188-SM1

{ }Pg 8

Recessed Angled Recessed Flat Flat w/ Metal Cover

Blanks Transitional Covers

Flat Recessed Angled Recessed Angled

Angled Angled

{ }Pg 8


{ }

{ }

{ }

cable management rings

DESCRIPTION PaRT NO.

3" Vertical Manager Rings 49260-MR3

6" Vertical Manager Rings 49260-MR6

Mounting Tie Bracket 49261-BKT

Vertical Transition Rings for Angled and Recessed-Angled Panels, 2RU 49262-HR1

rear cable management bars & accessories

DESCRIPTION flaT aNglEDRECESSED aNglED

Standard Cable Management Bar 49005-CMB 49006-AMB 4W006-AMB

High Density Cable Management Bar, 1RU 49005-DMB

Rear Cable Manager for Active Equipment, 2RU 41188-SM2

HINGED brackEts


Hinged Wall-Mount Bracket, 2RU 49251-W62



Front Hinged Bracket, 3RU 49400-FHB

Pg 9

Pg 9

Pg 9

ordering guiDe

High Density

Transition Rings3" & 6" Rings

Tie Bracket

Wall-Mount Bracket

Front Hinged Bracket

Angled Recessed Angled


rear cable management bars & accessories

DESCRIPTION flaT aNglEDRECESSED aNglED

Standard Cable Management Bar 49005-CMB 49006-AMB 4W006-AMB

High Density Cable Management Bar, 1RU 49005-DMB

Rear Cable Manager for Active Equipment, 2RU 41188-SM2

{ }

{ }

velcro® brand utility fasteners


Saddle Ties w/ 10/32 metal rack screws (10 per pack) 41020-SPR

Saddle Ties w/ #8 wood screws (10 per pack) 41010-SPW

J Hook 46700-SLG

Compression Strap 45224-RCS

Workstation Loops w/ Peel-Off Adhesive (25 per pack) 41225-SAP

Fasteners, Orange (10 per pack) 41030-OFT

Storage Rings, Inside Plant, 11.75" diameter 48900-IFR

Storage Rings, Outside Plant, 24" diameter 48900-OFR

velcro® brand cable fasteners

DESCRIPTION blaCk bluE yEllOw ORaNgEmaROON(PlENum RaTED)

Tie Wrap, 5" 43105-005 43105-05L 43105-05Y 43105-05O 43105-05P

Tie Wrap, 8" 43108-008 43108-08L 43108-08Y 43108-08O 43108-08P

Tie Wrap, 12" 43112-012 43112-12L 43112-12Y 43112-12O 43112-12P

Bulk Roll, 15' 43115-015 43115-15L 43115-15Y 43115-15O 43115-15P

Bulk Roll, 75' 43115-075 43115-75L 43115-75Y 43115-75O 43115-75P

Bulk Roll, 600' 43115-600

Compression Strap, 15" 44115-15E 44115-15L 44115-15Y 45115-15O

SoftCinch Lite, 75' 4S115-75E

Pg 11

Pg 10

SoftCinch Lite

Bulk Rolls

Compression Straps

Tie Wraps

Workstation Loops

Compression Strap

Fasteners

© 2010 leviton manufacturing co., inc. all rights reserved. F/10 – #3423

Leviton Corporate Headquarters | leviton.com 201 n. service road, melville, ny 11747 usa

customer service T 800.323.8920 / +1.631.812.6000E [email protected]

Leviton International Offices

asean countries T +1.631.812.6228E [email protected]

europe T +47.900.94.924E [email protected]

south Korea T +82.2.3273.9963E [email protected]

australia & new zealand T +64.4.562.8327E [email protected]

Leviton Network Solutions Division Headquarters | leviton.com/networksolutions 2222-222nd street s.e., bothell, wa 98021 usa

middle east and africaT +971.4.886.4722E [email protected]

china T +86.755.3320.0588E [email protected]

india / saarc T +91.80.4322.5678E [email protected]

latin americaT +52.55.5082.1040E [email protected]

canadaT +1.514.954.1840E [email protected]

Leviton International Regional Headquarters

inside sales T 800.722.2082E [email protected]

international inside sales T +1.425.486.2222E [email protected]

technical support T 800.824.3005 / +1.425.486.2222E [email protected]

Cable Management Solutions - Leviton · ladder rack / unistrut mounting Kit Fiber Cable Management...

Documents

Transcript of Cable Management Solutions - Leviton · ladder rack / unistrut mounting Kit Fiber Cable Management...