Anilkumar1
2
PROGRAM:-3 AIM- Program for the generation of unit impulse signal. TOOLS REQUIRED- P.C , matlab 7.0 PROGRAM: t=-2:1:2; >> y=[zeros(1,2),ones(1,1),zeros(1,2)]; >> stem(t,y); >> ylabel('amplitude'); >>xlabel(‘n’) OBSERVATION: RESULT- Desired waveform has been obtained. PRECAUTION- 1. Observe the waveform carefully.
-
Upload
ashok-singh -
Category
Technology
-
view
50 -
download
2
Transcript of Anilkumar1
![Page 1: Anilkumar1](https://reader035.fdocuments.net/reader035/viewer/2022071821/55b5fce5bb61eb404a8b46f5/html5/thumbnails/1.jpg)
PROGRAM:-3AIM-Program for the generation of unit impulse signal.
TOOLS REQUIRED-P.C , matlab 7.0
PROGRAM:t=-2:1:2;>> y=[zeros(1,2),ones(1,1),zeros(1,2)];>> stem(t,y);>> ylabel('amplitude');>>xlabel(‘n’)
OBSERVATION:
RESULT-Desired waveform has been obtained.
PRECAUTION-1. Observe the waveform carefully.2. Take the value of constant keeping care of all constraint.