The ultimate way to upgrade your existing equipment for condition monitoring and predictive maintenance: with only one SIM card the 4G.Router allows to manage Voice and Data transmission, vocal calls and Internet services simultaneously, remote monitoring via LAN and Wi-Fi connectivity.

Thanks to the connection to the FREEWARE COMNet platform, 4G.Router manages the remote control of devices connected to the serial port (RS-232/485) or to the LAN port via DDNS service. 4G.Router is also a PSTN-line emulator, and a wireless access point to offer wi-fi connectivity to connected devices.

• 4G LTE/UMTS/GSM router for lift application

• 4G/3G/2G mobile connection with SIM of any operator

• Access point wireless

• Dynamic DNS client

• Data transmission in standard RS-232, RS-485 and CAN-bus

• 1 LAN port 10/100 MB (RJ45 connector)

• 1 voice port FXS for autodialler

• 2 multi-function programmable relays

• Automatic reboot or by SMS

• Power supply 11 to 26 Vdc

In the IoT environment the 4G.Router plays a main role for lift applications, with the quality and reliability of Esse-ti products.

4G

Cable replacement

4G module with fallback to 3G and 2G

Remote diagnosis and maintenance

DDNSservice

Wi-Fi

Alarms and problems

notifications

Server direct access

Lift remote monitoring

Programmable digital inputs/

outputs

Programmable via web server

Voice & Data transmission

with only 1 SIM

Built-in back up batteries

w w w . e s s e - t i . i tTELECOMUNICAZIONI

100% MADE IN ITALY

4G.RouterThe universal platform for future-proof connectivity

COMNet

Dimensions (without antenna): 95x95x30 mm Weight: 273 g

Technical features MOBILE NETWORK• Module: LTE cat. 1 Penta-Band / UMTS HSPA Dual-Band /

GSM Dual-Band • Frequencies: LTE (700/800/900/1800/2100 MHz) / UMTS

HSPA (900/2100 MHz) / GSM (900/1800 MHz) • LEDs

SPEED• LTE Cat.1 DL: max 10.2 Mbps, UL: max 5.2 Mbps

PORTS• 1 LAN port RJ45 10/100 Mbps• 1 FXS port (for alarm system or analog telephone)• WiFi 2.4 GHz - IEEE 802.11b/g/n (for Access Point, Ad-Hoc

mesk network• 1 SIM card slot 2FF

ANTENNAS• 2 antennas: magnetic base antenna with cable (2 m) and

SMA/m connector • Wi-Fi stylus antenna

FUNCTIONS• Voice calls • Access point wireless (to offer Wi-Fi connectivity to

connected devices) • Dynamic DNS client (to allow the user to remotely access,

using the public Internet, the router itself and all the devices connected to it)

• 2 technological alarm inputs (notification via SMS or CLI call)• 2 relè outputs (local activation or via SMS)• Data transmission (RS-232, RS-485 and CAN-bus standards) • Local programming via telephone (DTMF tones) • Remote programming via SMS• Reading of programming codes via SMS• Caller number display service • CLIP / CLIR • Roaming service management • Battery check (low/dead/replaced battery notification via

SMS) • External power failure control (failure/restore notification via

SMS) • Relay-based notification of external power failure • Relay-based notification of 4G LTE / UMTS / GSM network

loss • Signal level check via local telephone or via SMS • Automatic converter of selected telephone number • Programmable telephone line voltage • Adjustable reception and transmission levels • Customizable timeout of post dialing • Automatic country setting • Automatic reboot under prolonged 4G LTE / UMTS / GSM

signal absence• Remote reboot • Firmware update OTA

POWER SUPPLY• Power supply: from 11 V to 26 V (dc) • Power supply input: terminal block 12/24 Vdc / jack for 230

Vac external adapter Back up battery: NiMH 800 mAh 7,2 V • Expected operation time with a new battery in idle state: 8

hours • Expected operation time with a new battery in conversation

state: 2 hours • External adapter: 100-240 Vac 50-60 Hz input / 12 Vdc 500

mA output / UK / CE mark

CERTIFICATION• CE mark

In the package:• 4G.Router module • Magnetic base antenna with cable (2 m) • Wi-Fi stylus antenna • External adapter: 100-240 Vac 50-60 Hz / 12

Vdc 500 mA / UK Mounting screw • User manual

Weight: 273 g

95 m

m

30 m

m

95 mm95 mm

4G.Router