Hikvision DDNS Management

Prama HIKVISION India Pvt. Ltd.

www.hikvision.com | Support@ pramahikvision.com

Feb. 16

Hikvision DDNS Management System

Basic Steps:

I. Network Setting in DVR

II. Configure hkDDNS in DVR

III. Port Forwarding in Router

IV. Register DVR on HIKVISION DDNS Server (hkDDNS)

V. Access DVR

Step 1:

Network Setting in DVR

Open DVR using IP address (default: 192.0.0.64) in Internet Explore.

Default: Login details // username: admin, Password: 12345

Set the DVR IP address in the existing network range.

Don’t forget to enter the DNS Address.

Network Settings in DVR

http://www.hikvision.com/



Feb. 16

Step 2:

Configure hkDDNS in DVR

1. Network Settings-> DDNS

2. Enable DDNS

3. Choose Protocol Type to hkDDNS

4. Enter the Server Address www.hik-online.com

5. Enter Device Domain Name

Step 3:

Port Forwarding of DVR in the Router

1. Open the Router page

2. Forward the http port (80) and the communication port (8000) of a device to its local IP address. Some devices also

require RTSP port and streaming port be forwarded properly.


http://www.hik-online.com/



Feb. 16

3. Check the Current Public IP address and check weather port forwarding is working fine or not.

Step 4: Then you could access the device directly from an IE web browser by using the URL below, as long as the device is

online.

Step 4:

Register DVR on HIKVISION DDNS Server (easy DDNS)

1. Open www.hik-online.com

2. Open Internet Explorer In the address bar, type IP address of DDNS Management Server Http://www.hik-online.com Login page shown as Figure.


http://www.hik-online.com/



Feb. 16

3. Register User if you don’t have an account, please click “register new user” to create a new user.

4. Enter in user name and password as per yours. And click OK to save. After creating a user, enter in User name and

password. Then click “Login” to enter DDNS Management System

Note: This login is for dealers and disturbers only. After login further they can add their Customer’s DVR under this login,

also they can add, edit, delete the DVR from here of his particular user/customer.

Device Management

1. After login, main page shown as Figure




Feb. 16

Click “Device Management”, there is no device at first time. Click “Add” button to add device. Also we can Modify and

delete the devices from this console.

1. Enter in Device aliases name and serial number. 2. By default, http port is 80. If http port of device was changed from 80, please enter new port in Http Port area.

Note: Make sure Device Alias and serial number you input are exactly correct, otherwise device cannot register to DDNS server successfully.

Device Status

Click “Device Status” to show all added devices information like Serial number, Dynamic IP, HTTP port, DDNS IP address.




Feb. 16

Step 5:

Access device

If the setup has been done successfully, there are two ways to access your device:

1. Login in to DDNS Management System first, then click device name, it will automatically link to device login page.

2. Directly type in www.hik-online.com/DeviceAlias name in IE address bar to access device

Example:

Default login details:

Username: admin

Password: 12345

Login and view the DVR.




Feb. 16

3. Using ivms-4200

Preview the DVR using iVMS-4200




Feb. 16

References:

Video clip for Hikvision DDNS Training, use following link for video clip.

http://www.youtube.com/watch?v=F8b8_XQshuo

For more Technical Support :

If u Still Have Any Query Please contact at our Technical support desk help line numbers as follows.

Technical Support: 022-28469999

Toll Free: 1800 222 699 {9:30 AM to 6:30 PM}


http://www.youtube.com/watch?v=F8b8_XQshuo

Hikvision DDNS Management

Documents

Transcript of Hikvision DDNS Management