Post on 31-Mar-2016
description
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
tuell+reynolds is a small company founded on
the tradition of handcrafted excellence. Our goal is to create
furnishings that will subtly enhance the beauty of any home.
The qualities that distinguish our collection from others are
the honesty of materials used, the harmony between these
materials and the overall design of each piece, and the
meticulous attention to detail and finish. Our collection is
entirely handmade to order by craftsmen working with time-
honored techniques and tools. We hope that you will enjoy
our collection and look forward to assisting you with any
inquiries or requests that you may have.
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
n a v a r r opatinaed steel with
cast bronze inlay
42” x 68” x 3” deep
MF-100
e u r e k apatinaed steel and bronze
outside diameter 46”
MF-200
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
m o n t e r e yarchitectural bronze
total height 70”
base 16” x 16” x 60” tall
laminated silk shade
FL-100
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
t i b u r o npatinaed steel and cast bronze
total height 72”
base 10” x 10” x 63” tall
laminated silk shade
FL-200
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
e s t e r ocast bronze
total height 23”
base 6 1/2” x 3 1/2” x 14” tall
oval laminated linen shade
TL-100
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
b o l i n a scast bronze
total height 31”
base 7” x 3” x 19 1/2” tall
oval laminated silk shade
TL-150
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
o l e m acast bronze
total height 29 1/2”
base 4” diameter spindle x 20” tall
laminated linen shade
TL-200
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
s t i n s o n architectural bronze
total height 25 1/2”
base 8 1/2” x 8 1/2” x 16” tall
laminated linen shade
TL-250
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
l a u r a s i acast bronze with fossilizedammonite
total height 22”
base 5” x 8” x 15” tall
oval laminated linen shade
TL-270
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
a l b u q u e r q u ePatinaed steel and cast bronzeTotal height 69”
Base 18” diameter x 60” tallLaminated silk shade
FL-250
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
g u a l a l acast bronze from sea kelp
total height 30”
base 8” diameter x 19” tallactual dimensions varyeach lamp signed original
round laminated linen shade
TL-275
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
booked pairs; size, color, and shape
vary from pair to pair.
the bronze base isdesigned to adjust fit for individual stones
s a n t i a g o s c o n c epatinaed bronze with brazilian
agate
agate Slabs vary from 8” - 12”
bronze mount 4 1/2” x 7 1/2”
projection from wall 3”
2 candelabra base bulbs
SC-300
m a n h a t t a npatinaed cast bronze
26” x 44”
arm length 24”
laminated silk shade
custom sizes & configurationsavailable
CH-100
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
m e n d o c i n opatinaed steel and bronze
26” x 44”
arm length 24”
laminated silk shade
custom sizes & configurationsavailable
CH-200
page 1 of 2 scale 1:12 effective 01/01/09
four arm - 90 degree arms - square plan
four arm - 60 degree/120 degree arms - rectangular plan
tuell+reynolds228 s. east street cloverdale, california 95425707 669-0556 fax 707 669-0557www.tuellreynolds.com
configurations for Mendocino and Manhattan chandeliersarm length can be specified
six arm - 60 degree armsround plan
three arm - 120 degree arms -triangular plan
configurations for Mendocino and Manhattan chandeliersarm length can be specifiedpage 2 of 2 scale 1:12 effective 01/01/09
four arm - 60 degree/ 120 degree arms - double module -rectangular plan
four arm - 90 degree arms - double module -rectangular plan
tuell+reynolds228 s. east street cloverdale, california 95425707 669-0556 fax 707 669-0557www.tuellreynolds.com
m a n h a t t a ns c o n c epatinaed cast bronze
total height 18”
projection from wall 8 1/2”
laminated silk shade
SC-100
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
m e n d o c i n os c o n c epatinaed steel and bronze
total height 18”
projection from wall 8 3/4”
oval laminated silk shade
SC-200
Lamp Shade Details
MONTEREY 20” x 23” x 14” (slant 14”)& TIBURON round shape, bleached pongee silk fabric
9-1/2” harp size
ESTERO (9” x 13”) x (10-1/2” x 15”) x 9.5” (slant 9.5”)oval shape, natural, neutral linen fabric7-1/2” harp size
BOLINAS (9” x 14”) x 15-1/2” x 22”) x 13-1/2” (slant 14”)& CALISTOGA oval shape, bleached pongee silk fabric
9-1/2” harp size
OLEMA 10” x 15” x 11” (slant 11”)round shape, natural, neutral linen fabric8-1/2” harp size
STINSON 9-1/2” x 13” x 10” (slant 10”)round shape, natural, neutral linen fabric8-1/2” harp size
ALL SHADES HAVE THE FOLLOWING DETAILS:
Gradually dropped washer: 1/2”Top/bottom trim, self bias: 1/2”LaminatedAntiqued wire, washer
tuell+reynolds228 s. east street, cloverdale, california 95425 707 669 0556 fax 707 669 0557
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
i n v e r n e s spatinaed steel and cast bronze
shown with mitre tile
14” x 52 1/2” x 32” tall
T-100
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
b r o n z e t i l e
concentric
mitre
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
b e l v e d e r epatinaed steel and bronze,
glass top
19” x 19” x 24” tall
T-200
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
t a m a l p a i spatinaed steel and cast bronze
shown with mitre tile
24” x 54” x 16” tall
T-150
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
f a r a l l o nbronze and patinaed iron
28” x 60” 16 1/4” tall
leather top
other surfaces C.O.M. custom sizes
T-180
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
f a r a l l o nbronze and patinaed iron
28” x 60” 16 1/4” tall
horn top
other surfaces C.O.M. custom sizes
T-185
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
c a r m e lcast bronze top and base withpatinaed iron tie bar
47” diameter top, 16 3/4” tall
T-300
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
athertoncast bronze top
with architectural bronze base
21 1/2” diameter x 28 1/2” tall
T-400
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
n i c a s i ocast bronze base
27” diameter base 17 1/2” tall
custom sizes and shapes available
T-420
c a t a l i n acast bronze and patinaed iron
22” diameter 24 1/2” tall
T-450
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
t i l d e n patinaed bronze and iron
28” diameter 16 1/4” tall
T-480
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
g i n z acast bronze top with
leather inlay
patinaed iron legs
10” round x 20” tall
ST-100
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
s h i n j u k ucast bronze top
patinaed iron legs
10” round x 20” tall
ST-150
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
h a k o n ecast bronze top
shown with concentric tile
patinaed iron legs
10” square x 20” tall
ST-200
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
b r o n z e t i l e
concentric
mitre
4 s q u a r e h a k o n ecast bronze top
shown with mitred tiles
patinaed iron legs
available in two sizes:
14” square x 27” tall ST-220
19 3/8” square x 27” tall ST-230
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
s e a c l i f fpatinaed bronze
18” round x 22” tall
ST-300
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
araneaepatinaed steel with silver facing and agate top
19” diameter x 20” tall
dimensions vary
ST-400
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
m o n t r e a lpatinaed iron and cast bronze
20 1/2” tall x 20” deep”
FPA-100
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
q u é b e cpatinaed iron and cast bronze
10 1/2” tall x 20” deep”
FPA-150
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
b a l t i m o r epatinaed iron and cast bronze
25 1/2” tall x 20” deep”
FPA-200
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
v e r m o n tpatinaed iron & hand chased bronze
24” tall x 20” deep”
FPA-300
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
t e l l u r i d epatinaed iron and cast bronze
17 3/4” tall x 20” deep”
FPA-400
elevation of typical fireplace
plan view of typical fireplace
page 1 of 1 scale 1:2 effective 01/01/09
instructions for measuring custom andirons
1. Measuring for andirons is simple - check depth of firebox and supply us with the dimension. Our typical andiron leg is 20" deep from front of andiron to end of leg inside firebox. For more shallow fireplaces we will shorten the rear leg at no upcharge.
2. The customer should also determine whether the andirons will sit entirely inside the firebox as is traditional, or entirely on the hearth or both inside and outside the firebox as is shown on the plan diagram above. If the andirons will sit partially inside and partially outside the firebox we will need to know if there is a signifigant change in elevation from the hearth to the firebox. It is typical for the firebox to be 1/2" to 3/4" below the level of the hearth. We accommodate this by using an adjustable screw or bolt at the rear leg of the andiron. Andirons which sit only on the hearth typically sit in front of a fireplace screen. We accomodate this by using a 6" overall depth and weight the rear legs.
inches
tuell + reynolds228 s. east street cloverdale, california 95425707 669-0556 fax: 707 669-0557www.tuellreynolds.com
line between hearth and firebox - location will varyelevation at hearth
inches
inches
o inches typical
elevation or floor level insidefireplace.
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
p a s a d e n a
f i r e g r a t epatinaed iron
27 1/2” x 15” 9” tall
custom sizes available
FPA-350
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
o l y m p i a f i r e g r a t epatinaed iron
27” x 15” 7” tall
custom sizes available
FPA-360
instructions for measuring for custom made firegrates page 1 of 1 scale 1:2 effective 01/01/09
1. It is a matter of personal preference how tightly the grate fits into the firebox. Please review this diagram andeitherspecifytheoverallwidthanddepthofthefiregrateorprovidedimensionsontheworksheetandwewillsizethegrateaccordingtoourexperience.Thecustomerwillalwaysgetachancetoreviewthegrateconfigurationintheshopdrawingthatwewillprovideandchangesoradjustmentscanbemade then.
2. Please check for interference with any existing construction such as gas log lighters.
3. Ifforanyreasonthegratewillsitpartiallyinsidethefireboxandpartiallyonthehearthpleaseletusknow if there are any level changes from the hearth to the inside of the firebox.
elevation of typical fireplace
please measure location and clear height of any gas stub outs or log lighters. Our grates are typically 3'clear from underside of bars to floor. We can adjust the clearance if neccesary.
We prefer to keep grate area simple andrectangular but some fireboxes will require a plan similar to that shown here.
plan view of typical fireplace
inches
tuell + reynolds228 s. east street cloverdale, california 95425707 669-0556 fax: 707 669-0557www.tuellreynolds.com
inches
inchesline between hearth and firebox - location will vary
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
a s p e npatinaed bronze and steel
16 1/2”wide x 18” long x 9”tall
FPA-500
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
m o n t a n apatinaed bronze and iron 9 3/8” diameter base 31” overall height
FPA-600
o z a r k f i r e t o o l shand forged from 3/4"
square iron with cast bronze.
standard length 34" custom
lengths available.
FPA-650
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
v a n c o u v e rpatinaed bronze and iron
custom sizes up to 36” x 48” wide
FPA-700
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
t a h o epatinaed bronze and iron
custom sizes up to 36” tall x 48” wide
FPA-800
peened handle
cross peened handle
ketchumiron with hammered bronze
custom sizes up to 48” tall
FPA-850
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
m o r a g apatinaed bronze and iron
custom sizes up to 48” x 50” wide
FPA-750
1. Fireplace screens usually fit either inside the opening or outside and overlapping it. The customer should measure thefireplace opening and determine that it is reasonably square. If the dimension is the same at top and bottom and thedimension is the same from side to side then the opening is usually square.
2. If the screen fits inside we recommend a minimum of 1/4" clearance all around - more if the opening is irregular as in a rustic stone fireplace. We will build the screen to fit as tight as the customer wishes, but cannot guarantee that it will fit. Ourscreen will be square and built to the customer supplied dimensions.
3. If the screen is to overlap, it is typical to overlap the edge of the opening by 1/2" to 1". It may be desirable to overlap even more if the opening is very small, for example.
4. See the plan view. Screens have feet which will sometimes be entirely on the hearth, or will be, as shown in the diagram,partially on the hearth and partially in the firebox. This depends on the desired location of the screen which varies for eachfireplace. If the feet will be partially on the hearth and partially in the firebox we need to know the elevation change from thehearth to the firebox. We accomodate this with an adjustable bolt at the rear of the feet. For both the Tahoe and theVancouver screens the feet are typically 5" long with 2-3/4" of the foot to the rear from the center line of the screen.
5. Customers can always send measurments and photos of unusual situations for our advice. We can come up with solutionsto most situations!
scale 1:2 effective 01/01/09
instructions for measuring custom firescreens
inches
typical footprint at rear of screen
fireplace screen shown fromabove - dotted lines
plan view of typical fireplace
elevation at hearth
0 inches typical
inches
inches
inches
inches
inches
fireplace screen shown asdotted lines
fireplace screen shown asdotted lines elevation of typical
fireplace - screen outside / overlapping opening - not suitable for Vancouver Style unless modificationsare made.
elevation of typical fireplace - screen fitting inside opening
tuell + reynolds228 s. east street cloverdale, california 95425707669-0556fax:707669-0557www.tuellreynolds.com
elevation or floor level inside fireplace. let us know if the firebox is flush with, above, or below the level of the hearth.furnish dimension as plus or minus in inches
inches
d r a p e r y
h a r d w a r epatinaed architecturalbronze
see shop drawings forspecifications and options.
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
tuell + reynolds228 s. east street cloverdale, california 95425707 669-0556 fax: 707 669-0557www.tuellreynolds.com
DHR-120 ring DHR-125 ring (hammered)
drapery hardware shop drawingsthese size rings work well with 3/4" od rod
Ø 1.011.281.4
0.625
DHR-100 ring
Ø 1.03
page 1 of 5 scale 1:2 effective 01/01/09
1.28 Ø 1.01
DHR-210 ring
DH -300 rod
1.125
Ø 1.25
DHR-315 ring (hammered)
these size rings work well with 1" rod
these size rings work well with 1-1/8" rod or with 1" rod
DHR -310 ring
Ø 1.5
2
1.75
DHR-200 ring
DHR-300 ring
DH -100 rod
Ø 1.5
Ø 1.25
0.75
2
1.7
DH -200 rod
1
DHR-215 ring (hammered)
Ø 1.5
2
1.75 Ø 1.25
6.5
2.25
bracket mounts withcountersunk hardware which isthen covered with stick - on 1/8" cover plates which also form thepanel design of bracket
drapery hardware shop drawingstuell + reynolds228 s. east street cloverdale, california 95425707 669-0556 fax: 707 669-0557www.tuellreynolds.com
page 2 of 5 scale 1:2 effective 01/01/09
large bracket - double rodside view DHB-310
large bracket front view DHB-300 or 310
1.25
0.75
6.51.5
1
1/4" bronze plate
large bracket-single rodside view DHB-300
6.53
1.375
0.6253
3/4" by 1' solid bar
note : projection can easily becustomized - our standard projectionsare shown.
31.25
0.75
tuell + reynolds228 s. east street cloverdale, california 95425707 669-0556 fax: 707 669-0557www.tuellreynolds.com
drapery hardware shop drawings
large bracket-single rodside view DHB-300 - center support style
large bracket-single rodside view DHB-300 - center style
page 3 of 5 scale 1:2 effective 01/01/09
large bracket front viewDHB-300 orDHB-310center support style
tuell + reynolds228 s. east street cloverdale, california 95425707 669-0556 fax: 707 669-0557www.tuellreynolds.com
3/4" by 1' solid bar
3
large bracket - double rodside view DHB-310 - center support style
6.5
6
0.75
1
1.375
3
1
1.375
3
3
3
0.625
1.5
1
0.753
available for all size rods
tuell + reynolds228 s. east street cloverdale, california 95425707 669-0556 fax: 707 669-0557www.tuellreynolds.com
drapery hardware shop drawingspage 4 of 5 scale 1:2 effective 01/01/09
1.375
0.625
5.75
small bracket - single 3/4" rod side view DHB-100
2
1
0.875Ø 1
0.75
end bracket-front and side view. DHB-200 for 1" rod.
small bracket-front viewDHB-100
3
tuell + reynolds228 s. east street cloverdale, california 95425707 669-0556 fax: 707 669-0557www.tuellreynolds.com
1.25
1
Ø 11
1.5
1.5 Ø 1.5
tuell + reynolds228 s. east street cloverdale, california 95425707 669-0556 fax: 707 669-0557www.tuellreynolds.com
1
ball finial-smalluse for 3/4" rod size
1.437
drapery hardware shop drawings
1.25
1.75
ball finial-largeuse for 1" or 1-1/8"rod sizes
page 5 of 5 scale 1:2 effective 01/01/09
Ø 1.25
mushroom finial-largeuse for 1" or 1-1/8"rod sizes
Ø 1
mushroom finial-smalluse for 3/4" rod size
tuell + reynolds228 s. east street cloverdale, california 95425707 669-0556 fax: 707 669-0557www.tuellreynolds.com
0.188
1
modern finial-smalluse for 3/4" rod size
1.25
1.250.25
modern finial-largeuse for 1" or 1-1/8"rod sizes
Ø 1.75 0.902 Ø 1.25
instructions for measuring drapery hardware
total rod length
1. Specify projection from wall to center line of rod if different from our standard projections.
2. Specify length of rod not including finials.Bracket location can be adjusted during the installation. We recommend installation of brackets into studs or solid wood blocking. Please note: as our hardware is constructed of solid bronze and 1/8" wall bronze tube, it is heavier than standard drapery hardware and we do not recommend installation with drywall anchors.
3. Decide whether you wil need one or more center supports for the rod. See page 3 of our drapery specifications for our standard center style bracket. Please contact us for additional information regarding deflection of our standard bronze tubing sizes over various spans.Custom center supports can also be specified by the designer if the standard version does not work for your application. As for the brackets, we recommend installation of center supports into studs or solid wood blocking.
page 1 of 1 scale 1:4 effective 01/01/09
specify
finial
tuell + reynolds228 s. east street cloverdale, california 95425707 669-0556 fax: 707 669-0557www.tuellreynolds.com
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
Terms:All tuell+reynolds furniture is made to order. A deposit of 50% of sale price is required before work willcommence. Lead time for production is 6-8 weeks from receipt of deposit. Shipping time is additional. Fullpayment, including state or local taxes if applicable, crating, handling, storage, and insurance if applicable, shall be made by Customer and received by tuell+reynolds before delivery or shipmentto Customer.
Small items may be shipped by UPS. Larger items may require crating. Delivery dates are approximate andtuell+reynolds will not be responsible for any delay or failure to perform due to circumstances beyond ourcontrol. We recommend shipment by moving van, blanket wrapped. If shipment by common carrier isrequested, crating is required.
Prices:All prices are wholesale, freight on board ( F.O.B.) Cloverdale, California. Prices do not include: shippingcharges, storage, local delivery, cartoning, crating, packing, sales tax, or uncrating. Prices are in U.S.Dollars.
Ordering Procedure:All orders must be in writing, with item name, number and finish included on your purchase order.Deposit check of 50% of sale price must accompany your order and be mailed to our corporate office:
tuell+reynolds, inc. 228 s. east street • cloverdale, california 95425tel (707) 669-0556 fax (707) 669-0557
Custom Orders/Finishes:tuell+reynolds welcomes your request for a custom order. As our products are hand made to order, many minor changes can be accommodated at no additional cost. Please contact a sales representative with your request.
Custom Design:tuell+reynolds can provide design and fabrication for a large range of projects both large and small. Please visit our web site www.tuellreynolds.com to see examples of our work, or contact us directly to discussyour project.
Designs/Dimensions:All designs are the property of tuell+reynolds, inc. We reserve the exclusive right to produce these designs.Design details are subject to change without notice. All dimensions are approximate.
Construction:All fabricated steel is cold rolled and drawn tube. Formed and forged steel is hot rolled bar stock. All textured bronze is cast silicon bronze C65500. Fabricated and Architectural bronze is 385 and 280.Finish is hot-waxed and hand polished, or clear powdercoat on cold rolled steel.
Finishes:All finishes are patinaed. The patina process is a chemical oxidation subject to changes in method of application and metal densities. Sample finishes are representative only and final color or overallappearance cannot be guaranteed.
t e r m s & c o n d i t i o n s
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
t e r m s & c o n d i t i o n s
Luminaries:All luminaries meet UL standards. Total height is measured to the top of our standard shade. Basedimensions indicate the footprint and height to the base of the socket. Standard cord length is 4’ for tablelamps, 6’ for floor lamps. Switches are located on the socket base. All sockets are 3-way.
Care and Maintenance:Our metals are protected with a hand rubbed paste wax applied hot. We recommend rewaxing at least once ayear to maintain luster and beauty. Trewax brand paste wax for wood floors may also be used. Any liquidspills should be wiped up immediately. Acidic liquids, abrasive and ammonia based cleaners may damage thepatina. Pledge brand cleaner may be used with a soft cloth for periodic dusting and cleaning. In general,care for your metals as you would a fine wood table or any antique.
Exposure:
All work as finished is intended for interior use only. If you would like to use any of our products outdoors,please contact us for specific finish options.
Changes/Cancellations:Changes in orders are subject to prior written approval by tuell+reynolds and will not be approved onceproduction has been started. Changes may affect the price and cause production/shipping delays.Cancellations accepted after production begins may forfeit the deposit.
Returns:No returns will be accepted without prior written consent of tuell+reynolds. Authorized returns must beshipped in accordance with shipping instructions issued by tuell+reynolds. Unauthorized returns will be refused.
Force Majeure:tuell+reynolds is not liable for delays in shipping or failure to preform due to labor dispute, war, riot, fire,earthquake, acts of God, compliance with government regulations, or any other cause beyond our control.
Claims:All orders are carefully inspected prior to shipment. When the freight company or delivery service acceptsyour order the merchandise belongs to you. Purchaser must carefully inspect orders promptly upondelivery. If there is any damage, you must describe the extent of damage on the delivery receipt. All claimsmust be made in writing and delivered to the freight carrier immediately.
Limited Warranty:tuell+reynolds warrants it’s standard catalog items to be free from defects in construction and or finish fora period of one year from date of final invoice. Instructions for care and maintenance must be followed.
Storage:Due to limited space in our studio, all orders must be shipped upon completion and final payment. Itemsnot picked up within 20 days of completion will be subject to storage and handling fees. Minimum storagefees of $60 per month, per item, will be added to your final invoice. No order will be released until storagefees have been paid.
e m a i l : m a i l @ t u e l l r e y n o l d s . c o m
tuell+reynolds228 s. east street, cloverdale, california 95425 phone: 707•669•0556 fax: 707•669•0557
CCaarree aanndd mmaaiinntteennaannccee ooff ppaattiinnaa ffiinniisshh bbrroonnzzee wwiitthh wwaaxxeedd ffiinniisshh
Our hand-made metalwork has been patinaed and sealed with a hand-rubbed paste wax. Care for our patinaed metal furniture follows:
• Clean and dry any spills immediately.
• General cleaning and dusting may be done with a soft cloth and a little Pledge.
• Do not use ammonia and solvent based cleaners, which may remove the wax and damage thepatina.
• Wax should be thinly applied with a small rag or bristle brush and buffed out to full luster using a soft cloth.
• Application of paste wax is recommended at least twice annually. More frequent applications maybe desired in marine or humid environments. Trewax brand paste wax, lemon oil, or otherfurniture waxes may also be used. A can of paste wax is included in this package.
• All items should be lightly waxed upon placement at their final destination (use the wax included).
• Finishes may darken over time. The textured metal surface featured on our furniture makes it very easy to freshen and brighten the finish if desired. Rub out the surfaces with a gray scotch brite pad and then dust with soft cloth and rewax.
CCaarree aanndd ssttoorraaggee ooff wwaaxxeedd ffiinniisshheess
CCaarree
Our hand-made metalwork has been patinaed and sealed with a hand-rubbed paste wax. Care for our patinaed metal furniture follows:
• Clean and dry any spills immediately.
• General cleaning and dusting may be done with a soft cloth and a little Pledge.
• Do not use ammonia and solvent based cleaners, which may remove the wax and damage the patina.
• Wax should be thinly applied with a small rag or bristle brush and buffed out to full lusterusing a soft cloth.
• Application of paste wax is recommended at least twice annually. More frequent applicationsmay be desired in marine or humid environments. Trewax brand paste wax, lemon oil, orother furniture waxes may also be used.
• All items should be lightly waxed upon placement at their final destination (use the wax included).
SSttoorraaggee
• Never wrap our metalwork in plastic for storage, or in paper products, which may absorbmoisture. Either may damage the finish.
• To avoid condensation on the metalwork, it should not be stored in a high humidity condition,nor where the night time temperature falls below the dewpoint.
• The client/ storage facility has 48 hours upon arrival of the finished product(s) to inspect andreport any damage to the carrier and to tuell + reynolds.
tuell+reynolds228 s. east street, cloverdale, california 95425 phone: 707•669•0556 fax: 707•669•0557
e m a i l : m a i l @ t u e l l r e y n o l d s . c o m
tuell+reynolds228 s. east street • cloverdale, california 95425707.669.0556 fax: 707.669.0557www.tuellreynolds.com
CCaarree aanndd ssttoorraaggee ooff wwaaxxeedd ffiinniisshheess
CCaarree
Our hand-made metalwork has been patinaed and sealed with a hand-rubbed paste wax. Care for our patinaed metal furniture follows:
• Clean and dry any spills immediately.
• General cleaning and dusting may be done with a soft cloth and a little Pledge.
• Do not use ammonia and solvent based cleaners, which may remove the wax and damage the patina.
• Wax should be thinly applied with a small rag or bristle brush and buffed out to full lusterusing a soft cloth.
• Application of paste wax is recommended at least twice annually. More frequent applicationsmay be desired in marine or humid environments. Trewax brand paste wax, lemon oil, orother furniture waxes may also be used.
• All items should be lightly waxed upon placement at their final destination (use the wax included).
SSttoorraaggee
• Never wrap our metalwork in plastic for storage, or in paper products, which may absorbmoisture. Either may damage the finish.
• To avoid condensation on the metalwork, it should not be stored in a high humidity condition,nor where the night time temperature falls below the dewpoint.
• The client/ storage facility has 48 hours upon arrival of the finished product(s) to inspect andreport any damage to the carrier and to tuell + reynolds.
tuell+reynolds228 s. east street, cloverdale, california 95425 phone: 707•669•0556 fax: 707•669•0557
e m a i l : m a i l @ t u e l l r e y n o l d s . c o m