Download - Setup 1 - With Doorbell Chime (VAC) - SkyBell WiFi Doorbell · Setup 1 - With Doorbell Chime (VAC) *SkyBell is only compatible with wired, mechanical doorbell chimes *Use class II

Transcript
Page 1: Setup 1 - With Doorbell Chime (VAC) - SkyBell WiFi Doorbell · Setup 1 - With Doorbell Chime (VAC) *SkyBell is only compatible with wired, mechanical doorbell chimes *Use class II

Wired, MechanicalDoorbell Chime

Low Voltage Transformer

Primary PowerUS = 120/130 VAC

UK & EU = 220/230/240 VAC

Secondary Power =10-36 VAC 10 VA

Wire from SkyBell attaches to terminal marked "Front Door".

Wire from SkyBell attaches to terminal marked "Trans or Transformer".

Setup 1 - With Doorbell Chime (VAC) www.skybell.com

*SkyBell is only compatible with wired, mechanical doorbell chimes*Use class II line 120 60Hz transformer (USA)*Do not use a resistor if you are using a doorbell chime

Connector

Connector

Wired, Mechanical Doorbell Chime