Setup 1 - With Doorbell Chime (VAC) - SkyBell WiFi 1 - With Doorbell Chime (VAC) *SkyBell is only...

Setup 1 - With Doorbell Chime (VAC) - SkyBell WiFi 1 - With Doorbell Chime (VAC) *SkyBell is only compatible with wired, mechanical doorbell chimes *Use class II line 120 60Hz transformer
download Setup 1 - With Doorbell Chime (VAC) - SkyBell WiFi 1 - With Doorbell Chime (VAC) *SkyBell is only compatible with wired, mechanical doorbell chimes *Use class II line 120 60Hz transformer

of 1

  • date post

    11-May-2018
  • Category

    Documents

  • view

    227
  • download

    1

Embed Size (px)

Transcript of Setup 1 - With Doorbell Chime (VAC) - SkyBell WiFi 1 - With Doorbell Chime (VAC) *SkyBell is only...

  • Wired, MechanicalDoorbell Chime

    Low Voltage Transformer

    Primary PowerUS = 120/130 VAC

    UK & EU = 220/230/240 VAC

    Secondary Power =10-36 VAC 10 VA

    Wire from SkyBell attaches to terminal marked "Front Door".

    Wire from SkyBell attaches to terminal marked "Trans or Transformer".

    Setup 1 - With Doorbell Chime (VAC) www.skybell.com

    *SkyBell is only compatible with wired, mechanical doorbell chimes*Use class II line 120 60Hz transformer (USA)*Do not use a resistor if you are using a doorbell chime

    Connector

    Connector

    Wired, Mechanical Doorbell Chime