OWAlifetime collection
Ce il ing systems for partiCular appl iCations
Hygiene, cleanroom and moisture resistant ceilings
2 Hygiene ceilings
Developed specifically for sensitive areas where hygiene is important, sanitas® 02 provides effective antibacterial and fungicidal resistance to both the decorative and reverse surface of the tile for the life of the ceiling.
applications:– hospitals (wards, minor surgical units, consulting
rooms etc.)– laboratories– sterile and hygienic areas
OWAcoustic® sanitas® 02
sterile ConDit ions to Combat fungi anD baCteria
3
aw = 0.15 | nrC = 0.15
sanitas® 02
Material mineral tile
Reaction to fire a2-s1,d0 in accordance with en 13501-1
Thickness approx. 15 mm
Colour White
Light reflection approx. 91 (iso 7724-2, iso 7724-3) (plain)approx. 88 (iso 7724-2, iso 7724-3) (Constellation)
Sound reduction* 35 db to 49 db (plain)31 db to 49 db (Constellation)
Moisture resistance up to 95 % rH
Resistance to fire* up to rei 180 (en 13501-2)
surface example | sanitas 02 | plain * dependent on system, soffit and other project specific factors
sanitas 02 | plain
Possible dimensions and system combinations
More information
sanitas 02 | Constellation (iso 5)
aw = 0.70 | nrC = 0.70
Cleaning:the surface of the tile can be vacuum cleaned using a soft brush attachment and/or cleaned with a damp oWa sponge without loss of the tiles hygiene properties. (tested to 500 cleaning cycles in accordance with the „gardner-test“).
Disinfection:Certificate of Hygiene from the german association of Hygiene and microbiology (DgHm) is available on request.
a report on the behaviour of sanitas® 02 ceiling tiles when subjected to microbiological contamination is available on request.
Clean room suitability:iso 5 as per iso norm 14644-01: 1999
Use in risk zones:suitable for rooms with risk zones 1, 2, 3 and 4 as per nfs norm 90-351: 2013
Emissions: oWa mineral wool tiles are low emission building materials and have achieved the german environmental “blue angel” classification confirming that they are manufactured from harmless raw materials (certified by ral gmbH, sankt augustin).
Prof. Dr. R. Muttersinstitute for medical microbiologyand Hospital hygiene.philipps university marburg
exposedModule sizein mm s
3
s 3a
600 x 600 • •625 x 625 • •1200 x 600 • •1250 x 625 • •
MATER
IALPRÜ
FUNGSANSTALT
STUTT GART
4
a completely new ceiling in the oWa product range: with thorough disinfecting options and high resistance to repetitive cleaning processes (up to 500 wash cycles based on the „gardner test“).
applications:– hospitals (wards, corridors and general areas)– schools– fitness studios– care homes– nurseries
Hygiene ceilings
OWAcoustic® pura
C a n b e e a s i ly a n D t H o r o u g H ly D i s i n f e C t e D
5
aw = 0.15 | nrC = 0.15
pura
Material mineral tile
Reaction to fire a2-s1,d0 in accordance with en 13501-1
Thickness approx. 15 mm
Colour White
Light reflection approx. 91 (iso 7724-2, iso 7724-3) (plain) approx. 88 (iso 7724-2, iso 7724-3) (Constellation)
Sound reduction* 35 db to 49 db (plain) 31 db to 49 db (Constellation)
Moisture resistance up to 95 % rH
Resistance to fire* up to rei 180 (en 13501-2)
surface example | pura | plain * dependent on system, soffit and other project specific factors
pura | plain
Possible dimensions and system combinations
More information
pura | Constellation (iso 5)
aw = 0.70 | nrC = 0.70
Cleaning:the surface of the tile can be vacuum cleaned using a soft brush attachment and/or cleaned with a damp oWa sponge (see oWa-installation guide no. 801 e).
Disinfection:Certificate of Hygiene from the german association of Hygiene and microbiology (DgHm) is available on request.
Clean room suitability:iso 5 as per iso norm 14644-01: 1999
Use in risk zones:suitable for rooms with risk zones 1, 2, 3 and 4 as per nfs norm 90-351: 2013
Emissions: oWa mineral wool tiles are low emission building materials and have achieved the german environmental “blue angel” classification confirming that they are manufactured from harmless raw materials (certified by ral gmbH, sankt augustin).
Prof. Dr. R. Muttersinstitute for medical microbiologyand Hospital hygiene.philipps university marburg
exposedModule sizein mm s
3
s 3a
600 x 600 • •625 x 625 • •1200 x 600 • •1250 x 625 • •
MATER
IALPRÜ
FUNGSANSTALT
STUTT GART
6
oWalux® ceiling tiles are suitable for areas that require the highest standards of cleanliness and hygiene. the smooth, white aluminium foil allows easy cleaning and/or disinfection of the tile surface.
applications:– hospitals– food processing and food retail outlets– laboratories– sterile and hygienic areas– high humidity areas– nurseries
Hygiene ceilings
OWAlux®
taking a Closer look at smootH surfaCes
7
aw = 0.15 | nrC = 0.15
OWAlux®
surface example | oWalux 64/2 | grey white
Material mineral tile, aluminium-laminated,
Reaction to fire a2-s1,d0 in accordance with en 13501-1
Thickness approx. 15 mm
Colour grey white
Light reflection on request
Sound reduction* 35 db to 49 db
Moisture resistance up to 95 % rH
Resistance to fire* up to rei 180 (en 13501-2)
* dependent on system, soffit and other project specific factors
oWalux 64/2 | grey white
Possible dimensions and system combinations
More information
oWalux 64/4 | silver
aw = 0.15 | nrC = 0.15
Cleaning:the cleaning processes for the ceilings vary, depending on design. all oWalux® surfaces can be vacuumed or dusted. Design no. 64/8 in white can also be wiped with a damp oWa sponge.
High pressure cleaning:Where high pressure washing may be requiredonly oWalux® should be used and then the tiles must be sealed into the grid using a compression strip and joint sealant (as shown in the adjacent diagram) to prevent ingress of moisture and contaminants during the cleaning process. the spray should be applied at an angle of 30° with a minimum distance of
40 cm from the surface of the ceiling and a maximum nozzle pressure of 40 bar. During high pressure cleaning the water temperature should not exceed 38 °C. Temperature range: up to a maximum of 50 °C at ceiling level
Surface Desinfaction:a report by the Dr. Wessling laboratory in altenberge is available confirming the effectiveness of surface disinfection (only oWalux® white).
oWalux 64/8 | whitea2-s3,d0 in accordance with en 13501-1
aw = 0.15 | nrC = 0.15
exposedModule sizein mm s
3
600 x 600 •625 x 625 •1200 x 600 •1250 x 625 •
12
4 3 5
Construction example:
1 Hold down clip2 main and cross tee3 Compression strip, if required4 silicone rubber (or equivalent), if required5 Design without perforation
MATER
IALPRÜ
FUNGSANSTALT
STUTTGART
8
With proven resistance to bacterial, fungal and yeast growth, oWacoustic® biocide bolero (fine textured surface) and oWacoustic® biocide sinfonia (plain smooth surface) can also provide high levels of acoustic performance, fire resistance and aesthetic appeal.
applications:– hospitals– nursing homes– laboratories– clinics– food industry
Hygiene ceilings
OWAcoustic® biocide
t H e p e r f e C t H i g H p e r f o r -m a n C e a l l-r o u n D e r W i t H m i C r o - b i o C i D ep r o p e r t i e s
9
aw = 0.85 | nrC = 0.85
biocide
surface example | biocide | bolero
Material mineral tile, fleece-covered
Reaction to fire a2-s1,d0 in accordance with en 13501-1
Thickness approx. 15 mm
Colour White
Light reflection approx. 84 (iso 7724-2, iso 7724-3) (bolero)approx. 87 (iso 7724-2, iso 7724-3) (sinfonia)
Sound reduction* 33 db
Moisture resistance up to 95 % rH
Resistance to fire* uo to rei 120 (en 13501-2)
* dependent on system, soffit and other project specific factors
biocide | bolero
Possible dimensions and system combinations
More information
biocide | sinfonia
aw = 0.85 | nrC = 0.85
Healthy benefits: physicians, carers and administration staff members, visitors and of course the patients – they should all feel comfortable in the clinical environment. especially comfortable. the new biocide ceiling tiles offer a sense of well-being under the strictest of hygienic conditions. their microbiocidal features are effective against bacteria, fungi and yeasts.
Visually and acoustically impressive:Virtually no other high-absorption ceiling tile „hides“ their performance with such attractive finesse. both the bolero and sinfonia designs combine superb elegance with an outstanding sound absorption value of 0.85.
Emissions:Can be safely used also in residential applications (report available on request).
exposedModule sizein mm s
3
600 x 600 •625 x 625 •1200 x 600 •1250 x 625 •
MATER
IALPRÜ
FUNGSANSTALT
STUTT GART
Prof. Dr. R. Muttersinstitute for medical microbiologyand Hospital hygiene.philipps university marburg
10
fresh, clean air in all rooms, without unpleasant odours, without hazardous substances – our contribution: oWacoustic® airControl, the ceiling tile that reduces odours and pollutants by more than 50 percent.
applications:– hotels– restaurants– canteens– hospital wards– nursing homes
Hygiene ceilings
OWAcoustic® airControl
a HealtHy DeCis ion: fresH air for better qualit y of l ife
11airControl
airControl
Material mineral tile
Reaction to fire a2-s1,d0 in accordance with en 13501-1
Thickess approx. 15 mm
Colour White
Light reflection approx. 88 (iso 7724-2, iso 7724-3)
Sound reduction* 31 db to 49 db
Sound absorption aw = 0.70 | nrC = 0.70
Moisture resistance up to 95 % rH
Resistance to fire* up to rei 180 (en 13501-2)
* dependent on system, soffit and other project specific factors
Possible dimensions and system combinations
More information
Battles against many harmful substances at onceoWacoustic® airControl combats harmful substances in the air such as ammonia, formaldehyde, triethylamine and nicotine – simultaneously. Dangers presented by air pollutants are continuously minimised, and the quality of air is significantly improved. the system can therefore help to avoid health complaints caused by poisonous substances in the atmosphere – the so-called “sick building syndrome”. the effectiveness of oWacoustic® airControl is proven, and attested by test certificates.
Fresh air + a fresh lookoWacoustic® airControl “works” permanently, without wearing itself out or yellowing. the ceiling stays functional and retains its colour. the result: a lastingly better atmosphere, lasting freshness, a lastingly bright, fresh, friendly design.
Built-in catalyseroWacoustic® airControl works on a proven principle. the surface of the mineral tile contains a catalyst. this converts more than 50% of olfactory harmful and odorous substances contained in the area air into hygienically harmless materials. the catalytic process works permanently and doesn’t degrade over time. against other air cleaning products the effect is independent on daylight or other sources of light. oWacoustic® airControl produces fresh air even over night.
– adsorption of the pollutant molecules in the area air by the surface of the oWacoustic® airControl ceiling tiles
– Catalytic reduction of the pollutants to hygienically and harmless final products
– after the chemical reaction the catalyst goes back to its original condition. so it isn’t exhausted.
Certified: sure and reliablepractical examination by the Danish institute eurofins confirmed: oWacoustic® airControl reduces relevant toxicological and olfactory-active substances in the area air by more than 50%. in a 14-day testing programme in which the tiles were continuously exposed to the selected representative substances nicotine, ammonia, formaldehyde and triethylamine, oWacoustic® airControl lowered the respective concentrations by more than half. oWacoustic® airControl can therefore significantly improve the purity of air quality.
More than fresh air: a ceiling systemoWacoustic® premium ceiling systems are multi-functional. they can reduce sound and improve area acoustics, are resistant to moisture and increase the levels of fire protection.
exposed
Module sizein mm s
3
s 3
cliq
s 15
cliq
600 x 600 • • •625 x 625 • • •
mineral tile
surface coating
nic
otin
e co
nten
t in
air
1 2 3 4 5 6 7 8 9 10 11 12 days
pollutant concentration without active ceiling pollutant concentration with oWacoustic airControl ceiling tile
MATER
IALPRÜ
FUNGSANSTALT
STUTTGART
pollutant concentration without active ceiling pollutant concentration with oWacoustic airControl ceiling tile
nikotine triethylamineformaldehydeammonia
µg / m³
150
100
50
0
12
Clean rooms have special requirements regarding air purity, which also has consequences for the features of the ceiling systems. We focus on the maximum requirements in accordance with us standards, with which our oWacoustic® clean ceiling tiles comply in five of six classes (class 10 to class 100.000).
applications:– precision engineering– optical manufacturing– hi tech electronic component manufacturing
Cleanroom ceilings
OWAcoustic® Clean
W H e r e n o D u s t p a r t i C l e s a r e t o l e r a t e D
13Clean
surface example | Clean 64/12 | grey white
Material mineral tile
Reaction to fire a2-s1,d0 in accordance with en 13501-1
Thickness approx. 15 mm
Colour grey white
Light reflection on request
Sound reduction* 35 db to 49 db (grey white, silver, white)31 db to 49 db (universal)
Moisture resistance up to 95 % rH
Resistance to fire* up to rei 180 (en 13501-2)
* dependent on system, soffit and other project specific factors
Possible dimensions and system combinations
More information
Cleaning:the cleaning processes for the ceilings vary, depending on design. all oWacoustic® clean surfaces can be vacuumed or dusted. Design no. 64/18 in white can also be wiped with a damp oWa sponge.
Tested: suitable for use in cleanroomsto establish the suitability of oWacoustic® clean room ceilings, they were subjected to prolonged tests in accordance with en iso 14644-1 at the fraunhofer ipa, stuttgart. the Class 4 performance recorded can be compared with the Class 10 performance shown in the former us-federal standard 209e. this Class allowed a maximum of 10 particles of size ≥ 0.5 μm per cubic foot of air.
aw = 0.15 | nrC = 0.15
Clean 64/12 | grey white Clean 64/14 | silver
aw = 0.15 | nrC = 0.15
Clean 64/18 | whitea2-s3,d0 in accordance with en 13501-1
aw = 0.15 | nrC = 0.15
Clean 65/1 | universal
aw = 0.55 | nrC = 0.55
exposedModule sizein mm s
3
600 x 600 •625 x 625 •
12
4 3 5
Construction example:
1 Hold down clip2 main and cross tee3 Compression strip, if required4 silicone rubber (or equivalent), if required5 Design without perforation
MATER
IALPRÜ
FUNGSANSTALT
STUTTGART
14
oWacoustic® mavroc® has been developed for use in external areas and internal areas where the ceilings maybe subject to long term exposure of up to 95 % relative humidity.
applications:– swimming pools– changing rooms, wellness facilities– external areas
moisture resistant ceilings
OWAcoustic® mavroc®
W H e r e H i g H H u m i D i t yp e r f o r -m a n C e i s a n e C e s s i t y
15mavroc®
surface example | mavroc | Constellation
Material mineral tile
Reaction to fire a2-s1,d0 in accordance with en 13501-1
Thickness approx. 15 mm
Colour White
Light reflection approx. 86 (iso 7724-2, iso 7724-3) (Harmony)approx. 88 (iso 7724-2, iso 7724-3) (Constellation)
Sound reduction* 31 db to 49 db
Moisture resistance up to 95 % rH, permanent
Resistance to fire* up to rei 180 (en 13501-2)
* dependent on system, soffit and other project specific factors
Possible dimensions and system combinations
More information
Suspension system:Where the ceiling is subject to extreme levels of humidity it is recommended that oWaconstruct® corrosion resistant suspension system s 3e is used.
Note:When the surrounding conditions can cause condensation on the tile surface, we recommend using closed metal cassettes from the oWatecta® product line.
Cleaning:the surface of the tile can be vacuum cleaned using a soft brush attachment and/or cleaned with a damp oWa sponge.
Emissions:Can be safely used in residential applications (report available on request).
aw = 0.70 | nrC = 0.70
mavroc | Constellation mavroc | Harmony
aw = 0.70 | nrC = 0.65
* other systems are only suitable to a limited degree
exposedModule sizein mm s
3e*
600 x 600 •625 x 625 •
MATER
IALPRÜ
FUNGSANSTALT
STUTT GART
16
oWacoustic® aquaCosmos® has a high level of humidity resistance and can be used in humid areas where the ceilings maybe subject to exposure of up to 100 % relative humidity.
applications:– swimming pools– changing rooms, wellness facilities
moisture resistant ceilings
OWAcoustic® aquaCosmos®
W H e r e H i g H H u m i D i t yp e r f o r m a n C e i s a r e q u i r e m e n t
17aquaCosmos®
surface example | aquaCosmos /o
Material mineral tiles
Reaction to fire a2-s1,d0 in accordance with en 13501-1
Thickness approx. 15 mm
Colour White
Light reflection approx. 84 (iso 7724-2, iso 7724-3)
Sound reduction* 35 db to 49 db (un-needled)31 db to 49 db (needled)
Moisture resistance up to 100 % rH
Resistance to fire* up to rei 180 (en 13501-2)
* dependent on system, soffit and other project specific factors
Possible dimensions and system combinations
More information
Suspension system:Where the ceiling is subject to extreme levels of humidity it is recommended that oWaconstruct® corrosion resistant suspension system s 3e is used.
Note:When the surrounding conditions can cause condensation on the tile surface, we recommend using closed metal cassettes from the oWatecta® product line.
Cleaning:the surface of the tile can be vacuum cleaned using a soft brush attachment and/or cleaned with a damp oWa sponge.
Emissions:Can be safely used in residential applications (report available on request).
aw = 0.15 | nrC = 0.15
aquaCosmos /o aquaCosmos /n
aw = 0.60 | nrC = 0.65
exposedModule sizein mm s
3e*
600 x 600 •625 x 625 • * other systems are only suitable to a limited degree
MATER
IALPRÜ
FUNGSANSTALT
STUTT GART
18
this new ceiling tile remains stable also under extreme conditions. it can be cleaned with a humide sponge or dust is removed with a vacuum cleaner.
applications:– swimming pools– changing rooms, wellness facilities– buildings with strict requirements in relation to moisture
resistant, hygiene and acoustics
moisture resistant ceilings
OWAcoustic® ocean
H u m i D i t y u n D e rC o n t r o l
19ocean
ocean
Material mineral tiles
Reaction to fire a2-s1,d0 in accordance with en 13501-1
Thickness approx. 19 mm
Colour White
Light reflection on request
Sound reduction* 30 db, CaC 32 db
Sound absorption aw = 0.95 | nrC = 0.90
Moisture resistance up to 100 % rH
Resistance to fire* up to rei 90 (en 13501-2)
* dependent on system, soffit and other project specific factors
Possible dimensions and system combinations
More information
Suspension system:Where the ceiling is subject to extreme levels of humidity it is recommended that oWaconstruct® corrosion resistant suspension system s 3e is used.
Note:When the surrounding conditions can cause condensation on the tile surface, we recommend using closed metal cassettes from the oWatecta® product line.
Cleaning:the surface of the tile can be vacuum cleaned and/or cleaned with a damp oWa sponge.
Emissions:Can be safely used in residential applications (report available on request).
MATER
IALPRÜ
FUNGSANSTALT
STUTTGART
exposedModule sizein mm s
3e*
600 x 600 •625 x 625 • * other systems are only suitable to a limited degree
Odenwald Faserplattenwerk GmbH Dr.-f.-a.-freundt-straße 3 | 63916 amorbachtel +49 93 73 . 2 01-0 | [email protected] br
ochu
re 9
898
e05
1500
,5
Ceiling systems for particular applications
no responsibility is taken for the correctness of this information.
Top Related