ZOT Brunswick Catalog

ZOT Pinsetter Parts Catalog is divided into easy-to-use sections, as determined by assembly, e.g., Gearbox & Deck, Elevator, Foul Detectors,Triggering, etc. Each section starts with its own index in which the ZOT parts are identified in bold outlines, and annotated with the page number where you will find more details (photos, Illustrations and description) of the product.

The symbol as applied to selected products in this catalog, identify those products which have very distinct added features, benefits and/or functions not found in the original parts or assemblies supplied by the various pinsetter manufacturers.AMF and/or Brunswick, as used throughout this catalog, are the registered trademark of QubicaAMF Worldwide, LLC. andBrunswick Bowling and Billiards Corp., respectively; and neither are in any way associated with ZOT Pinsetter Parts, Inc.

ZOT Pinsetter Parts Catalog

Section 1Foul Detectors

Pages 1 – 9

Section 2Ball Conditioner Products

0 – 16

Section 3Glow Bowling Products

Pages 17 – 21

Section 4Electronic Triggering

Pages 22 – 29

Section 5Gearbox and Deck Assembly

Pages 30 – 38

Section 6Elevator Assembly

Pages 39 – 45

Section 7Rake Shaft AssemblyPages 46 – 51

Section 8Tools and Safety ProductsPages 52 – 54

Section 9Pit Cushion AssemblyPages 55 – 63

Section 10Ball Return AssemblyPages 64 – 69

Section 11Lane ProductsPages 70 – 71

Section 12Pinsetter ConversionPages 72 – 75

Table of Contents

1

Foul

Det

ecto

rs

1

Foul DetectorsIndex

99

7

34

8

73

6

6

Spare Parts For Older Model Foul Detectors

Wizard Double Spare PartsBrunswick & AMF

Description Part NumberSpare Parts Kit #400112A. PC Board #431034B. Fuse (pkg. of 6) #400110C. Sensor Assembly #431015D. Reflector Only #800018E. Reflector Assembly #420088F. Lamp (pkg. of 10) #400094G. Lamp Socket Assembly #440020H. Power Harness #440017I. Scoring Harness for Brswk. #440018I. Scoring Harness for AMF #440039J. Buzzer #400111

Foul Conversion Spare Parts1991 Model Only

Description Part NumberA. PC Board #431029C. Sensor Assembly #431015D. Reflector Only #800018E. Reflector Assembly #420088

A

B

C

E

F G H

I

J

I

D

9

1

FoulDetectors

2

Foul Detectors

How to select the right Foul Detector product for your center

In the following seven pages you will finddetails of ZOT’s fine line of Wizard FoulDetector products, which fall into fourcategories.

Identify which Foul Detector is the best fitfor your center in the grid to the right andthen go to the appropriate product page tofind all the details.

The ZOT’s Wizard ‘Plus’ Foul Detector is uni-versally recognized as the most reliableproduct in the industry. No other brand canmatch the features included in the ZOTproduct.

Wizard ‘Plus’ Foul Detector and Cover’s Package#400195 Cover’s Package to Replace Astro/2000#400196 Cover’s Package to Replace Gold Crown and Crown Imperial

Package includes: Wizard ‘Plus’ Foul Detector & One Wide and One Narrow Black Metal Cover

For individual product informa-tion, including features and ben-efits, See pages 3, 4, 5, etc.

?

“Replacing Foul Detectors Improves the Bowler’s Experience...Replacing Foul Detector Covers Improves the Image of your Center”

Featurefor feature...Dollar for dollar...the best deal in the market

Subway (Underlane) Ball Returns

Subway Ball Returns with no 115V available atthe foul line —replaces early model Brunswick Telefoul

Surface (overlane) Ball Returns

Modification for ASTRO/2000 System

Wizard Plus # 400140See Page 4

Wizard Low Voltage # 400102 See Page 5

Wizard Surface # 400064 – 400029 -400066 – 400030

See Page 6

Wizard Enhanced PC Board #400078Infrared Head Conversion # 400075

See Page 7

3

3

3

3

Special

All Inclusive

Package

Price

1

Foul

Det

ecto

rs

3

Foul Detectors

Measure as shown

Foul Line

Steel Foul Detector Covers#420299 Wide Ball Return Cover/Black#420195 Wide Ball Return Cover Aluminum

#420300 Narrow Divider Trim Cover Black#420196 Narrow Divider Trim Cover Aluminum

#420291 Wide Ball Return Cover Black#420193 Wide Ball Return Cover Aluminum

#420292 Narrow Divider Trim Cover Black#420194 Narrow Divider Trim Cover Aluminum

Features & Benefits

Vinyl Finish: Available in black and aluminum.

Rugged Construction: ZOT’s Metal Foul DetectorCovers are designed and manufactured for decades oftrouble free service.

Replacement for Astro and 2000 Covers (10” [.254M])See illustration above.

Replacement for Gold Crown and Crown ImperialCovers (7-1/4” [.184M] or 8” [.204M] ) See illustration above.

Measure as shown

Foul Line

Features & Benefits

Vinyl Finish: Available in black and aluminum.

Rugged Construction: ZOT’s Metal Foul DetectorCovers are designed and manufactured for decades oftrouble free service.

1

FoulDetectors

4

Foul Detectors

Wizard ‘Plus’ Spare Parts:Description Part NumberSpare Parts Kit #400137PC Board #431043Fuse (pkg. of 6) #400110Sensor Assembly #431015Reflector Only #800057Reflector Assembly #400052Lamp (pkg. of 10) #400094Lamp Socket Assembly #440020Power Harness #440017Scoring Harness #440056Buzzer #400111Transformer #431040

Replaces Brunswick Gold Crown and Astro/2000

Only Available from ZOT: No othermanufacturer or supplier offers afoul detector unit that even comesclose in terms of features and ben-efits. Check it out for yourself.

Wizard ‘Plus’For Brunswick Subway Ball Returns#400140

Multi-Voltage/Multi-Cycle: The Wizard ‘Plus’operates at either 115V/60Hz or230V/50Hz with a flip of a switch.

Alignment Indicator

All Modular Design

Vibration Protection

115V – 230V Switch

Infrared Technology: ZOT Wizard Foul Unitsfeature infrared sensors that are solid stateand rated for millions of hours of dependableservice. Infrared sensors replace trouble-some incandescent bulbs.

Alignment Indicators: A 4-unit LED systemindicates signal strength. This aids theinstaller and/or mechanic in the alignment ofthe sensors.

Automatic Scoring Compatible: ZOT WizardFoul Units transmit the proper signal neededto communicate with automatic scoring sys-tems. Changing the signal is as easy as flip-ping a switch.

Marginal Signal Alert: ZOT Wizard Foul Unitswill alert the mechanic to pending problems.Four different buzzer sequences can occur, ifthe unit has a failure, allowing the mechanicto troubleshoot.

All Modular Design: All the individual compo-nents simply plug onto the PC Board, makingtroubleshooting and the replacement ofparts simple.

Self Diagnostics: ZOT’s microprocessor auto-matically checks the sensors every timethere is a foul. If a Wizard Foul Unit detects aproblem it will automatically turn itself off . . .one lane at a time.

Wizard ‘Plus’ and Wizard Low VoltageFeatures & Benefits

Power Harness

ScoringHarness

Reflector Assembly

Dust Cover (Optional Add-on)

#620145

(continued on next page)

1

Foul

Det

ecto

rs

5

Foul Detectors

5

Wizard – Low VoltageDoes not require 115VAC Power at the Approach#400102

Replaces Crown Imperial Telefoul

Wizard Low Voltage Spare Parts:Description Part NumberSpare Parts Kit #400114PC Board #431025Sensor Assembly #431015Reflector Only #800018Reflector Assembly #420088Lamp (pkg. of 10) #400094Lamp Socket Assembly #440020Power Harness (75 ft.) #440043Scoring Harness #440041Buzzer #400111Transformer #400065

Low Voltage Kit Includes: Detector Assembly, Wide Metal Detector Cover(black), Transformer, Power Supply Cable, two Reflector Assemblies and AllMounting Hardware to install complete kit.

Separate Transformer and Wire Run

Low Profile: Built for subway ball returns,serving two-lanes, the Wizard ‘Plus’ and LowVoltage fit under most major brands of exist-ing wide ball return covers.

Microprocessor Efficient: All ZOT Wizard FoulUnits have State-of-the-Art Microprocessortechnology. This simplifies the circuitry, mak-ing all Wizard Units more cost effective andreliable.

Light Source Recognition: ZOT’s infrareddesign features a special operational frequen-cy for its emitter and receiver communica-tions. Matching this frequency eliminates anaffect from alternate light sources: e.g. over-head lighting, and cosmic/glow lighting.

Vibration Protection: The PC Board is mount-ed on a shock-absorbing buffer to minimizeball impact vibration that can damage delicatecircuitry common to PC Boards.

**Unique to the Low Voltage Unit:**

No need for an Electrician to Install: Since theZOT Wizard (Low Voltage) comes completewith a Transformer and Low Voltage supplycable, and only requires a standard 115 Voltduplex outlet to supply power to the unit, theinstallation can be completed by the centermechanic.

Matching Narrow Cover, order separately

#420292

Alignment Indicator

Standard Cover: Black

(continued)

1

FoulDetectors

6

Foul Detectors

Double UnitSingle Unit

Ais

lew

ay/P

illar

s

Bal

l Ret

urn

Bal

l Ret

urn

Bal

l Ret

urn

Single Unit

Single Unit

Single Unit

Reflector includedin ZOT Kit

Original Cover

ZOT Foul Detector

Features & BenefitsInfrared Technology: ZOT Wizard Foul Unitsfeature infrared sensors that are solid stateand rated for millions of hours of dependableservice. Infrared sensors replacing trouble-some incandescent bulbs.Self Diagnostics: ZOT’s microprocessor auto-matically checks the sensors every time thereis a foul. If any Wizard Foul Unit detects aproblem it will automatically turn itself off…….one lane at a time.Alignment Indicators: A 4-unit LED systemindicates signal strength. This aids theinstaller and/or mechanic in the alignment ofthe sensors.All Modular Design: All the individual compo-nents simply plug onto the PC Board, makingtroubleshooting and the replacement of partssimple.Vibration Protection: The PC Board is mount-ed on a shock-absorbing buffer to minimizeball impact vibration that can damage deli-cate circuitry common to PC Boards.Marginal Signal Alert: ZOT Wizard Foul Unitswill alert the mechanic to pending problems.Four different sequences of buzzer actionscan occur if the unit has a failure allowing themechanic to troubleshoot.Microprocessor Efficient: All ZOT Wizard FoulUnits have State-of-the-Art Microprocessortechnology. This simplifies the circuitry, mak-ing all Wizard Units more cost effective andreliable.Automatic Scoring Compatible: ZOT WizardFoul Units transmit the proper signal neededto communicate with automatic scoring sys-tems. Changing the signal is as easy as:either flipping a switch or moving jumpers toa different set of pins.No need for an Electrician to Install: The ZOTWizard (Surface) comes with a Transformerand Low Voltage supply cable allowing aMechanic to complete the installation with noadded help.Light Source Recognition: ZOT’s infrareddesign features a special operational frequen-cy for its emitter and receiver communica-tions. Matching this frequency eliminates anaffect from alternate light sources: e.g. over-head lighting, and cosmic/glow lighting.

#400064Serving Two Lanes

#400029End UnitServing One Lane

Approach Mounted Transformer:For centers with 115V Power Supply at Foul Line. Replaces: Brunswick Gold Crown and Astro/2000.

#400066Serving Two Lanes

#400030End UnitServing One Lane

Masking Wall Mounted: For centerswith 115V Power supply at Pinsetters.Includes: New Wire Run from Transformer to Foul Unit.Replaces: Brunswick Crown Imperial Telefoul.

Wizard Surface Spare Parts:Description Part NumberSpare Parts Kit #400113PC Board #431025Sensor Assembly #431027Reflector Only #800018Reflector Assembly #420088Lamp (pkg. of 10) #400094Lamp Socket Assembly #440020Power Harness for #400064 #440042Power Harness for #400066 #440043Scoring Harness #440041Buzzer #400111Transformer #400065

Kit Includes: Detector Assembly, Narrow Metal Detector Cover (Silver), Transformer, PowerSupply Cable, two Reflector Assemblies and All Mounting Hardware to install complete kit.

Wizard Surface for Brunswick Surface Ball Returns

Vibration Protection Alignment Indicator

Example: 6-Lane Center with Aisleway

1

Foul

Det

ecto

rs

7

Foul Detectors

Sensor AlignmentIndicator

InfraredAdd-onSensors

Removed Original Parts

Enhanced P C Board Infrared HeadEnhanced PC BoardFor Brunswick Astro and 2000 Telefoul Systems

#400078

PCA VibrationProtection

Features & Benefits

Vibration Protection: The PC board ismounted on a shock absorbing buffer tominimize ball impact vibration which candamage delicate circuitry common to PCboards.

Simple Plug in Installation: The ZOTEnhanced PC Board simply plugs into theexisting equipment, with no modificationnecessary.

Alignment Indicator: A 4-unit LED systemindicates when the signal is strongest. Thisaids the installer and the mechanic, shouldrealignment ever be necessary.

Self Diagnostics: ZOT’s exclusive micro-processor circuit automatically checks sen-sor signal levels every time you switch theunit on, and every time there is a foul.

Easy Conversion to Infrared: The ZOT PCBoard operates with the original photo celland bulbs, but it also includes the drive cir-cuit for Infrared sensors. The ZOT InfraredSensor Source is Solid State Diode rated formillions of hours of dependable service – agreat improvement over the 2,000 hoursrating of the old incandescent bulbs.

Easy to Install: The ZOT Infrared HeadConversion simply plugs into the ZOTEnhanced PC Board.

All the Features of the ZOT Wizard: That’swhat you get when you complete yourupgrade and combine the ZOT PC Boardwith the ZOT Infrared Head.

Infrared Head Conversion (Optional Add-on to Enhanced PC Board)#400075**Requires #400078

Enhanced PC Board Spare Parts:Description Part NumberPC Board #431023

Infrared Head Conversion Spare Parts:Description Part NumberSensor Assembly #431027Reflector Only #800018Reflector Assembly #420088

Note:For Single Lane Application: One Lane Blockout Jump Wire #400187

1

FoulDetectors

8

Foul Detectors

Infrared Scanner Ball Detector#400139 For Brunswick 79 Scanner Ball Detector#400151 For Brunswick 86 Scanner Ball Detector#400219 For Brunswick 90 and Frameworx Camera Ball Detector

Features & Benefits

Infrared Technology: Features an InfraredSensor Source that’s Solid State Diode ratedfor millions of hours of dependable service.Infrared eliminates replacement of old incan-descent bulbs, which are only rated at 2,000hours.

Alignment Indicator: A 4-unit LED systemindicates when the signal is strongest. Thisaids the installer and the mechanic, shouldrealignment ever be necessary.

All Modular Design: All components pluginto the PC board separately, making iteasy and possible to change parts andtroubleshoot.

Microprocessor Efficient: ZOT’s State-of-the-Art Microprocessor technology simplifies thecircuit, making the product surprisingly costeffective and reliable.

Eliminates Annoying League Interruptions:Minimizes constant readjusting of lens andsocket plate.

Easy Access: The units Hinged Dust Coverallows easy access to the unit, without need-ing a screwdriver.

Easy To Install: The system mounts in frontof the scanner assembly (Pinsetter side), andplugs into the existing sensor connector.

79 Scanner Ball Detect Spare Parts:Description Part NumberPC Board #431042Sensor Assembly #431027Reflector Only #800018Reflector Assembly #420088Power Harness #440070

86 Scanner Ball Detect Spare Parts:Description Part NumberPC Board #431031Sensor Assembly #431027Reflector Only #800018Reflector Assembly #420088Power Harness #440071

90 & Frameworx Camera Ball DetectSpare Parts:

Description Part NumberPC Board #431031Sensor Assembly #431027Reflector Only #800018Reflector Assembly #420088Power Harness #440072

Sensor Alignment Indicator

ZOT Unit Replaces Two Brunswick # 57-214904-000

ZOT Unit Replaces One 79 Two Lane Sensor

1

Foul

Det

ecto

rs

9

Foul Detectors

Foul Light Lamp VibrationDamper KitRetrofit for ZOT Wizard Foul Detectors#400181

Extends The Life Of #90 Lamps: Testresults confirm that this vibration systemgreatly reduces early failure rate of lampfilaments.

Increased Reliability: Results in reducedtime on routine maintenance.

Kit Contains Parts For One Complete Unit:(E.G., Two lamp fixtures).

Cover Hold Down Kit#420182

Secure Loose Foul Detector Covers: Steelanchor plate firmly connects to the woodapproach regardless of the condition of thescrew hole.

Easy Installation: Drill recess into woodapproach using 1 1/2" wood bit, then fas-ten steel anchor to approach using twowood screws. To finish, secure foul detectorcover with a 3 1/2" machine screw. Allscrews are included in the kit.

Scanner Ball Detect Reflector KitFor Brunswick AS 80 And AS 90 Scoring#420089 Improved Signal Strength: ZOT’s

simple modification will improvesignal strength 2-1/2 times, yield-ing improved performance frommarginal bulbs.

Cost Savings: The larger surfacereflector, and special 15° retro-reflective face, will result in sav-ings on bulbs and equipmentmaintenance.

Reflector Only: #800019Guard Bracket Only: #640039

Note:Each kit includes two reflectors.

Rectangular Ball Detect ReflectorFor Brunswick AS 80 And AS 90 Scoring With AMF Hide-A-Bumper System

#800041

Improved 79 Scanner Performance: WhenAMF’s Hide-a-Bumper system is installedunder the divider trim and capping, with AS80 or AS 90 scoring, ZOT’s Rectangular BallDetect Reflector will dramatically improvemarginal operating signal levels.

Saves Money: This low cost upgrade notonly yields a better performance, it cutsdown on bulbs, and other related equipmentreplacement.

Increased Signal Strength: The special highoutput 15° retro-reflective face of this smallreflector, which will fit under your existing cover,will increase your signal strength by 50%.

Low Cost Modification: Which minimizesproblems with dust, alignment and marginal bulbs.

Signal Strength Reflector Modification KitFor Brunswick Astro/2000 Telefoul#420088

2

BallConditioner

10

Ball Conditioner Products

12

10

8

6

4

2

0

ZOT “GlossBoss” Coin-Op Ball Conditioner#420397

ZOT is pleased to introduce the all-new feature rich “GlossBoss” BallConditioner …a Coin-Operated machine that can generate revenues for yourcenter or pro-shop … even when you’re not there.

Scrolling Color Message & Advertising Display

Customer Friendly Display

Bill Acceptor

Mechanical Compound Advance System

Easy to Program Control Box

Buffer Pressure Meter

Unique Easy-Adjust Buffer Shaft

Electronic Coin Validator

®

Only included in machines for USA


2

Bal

lCon

diti

oner

11


Yes…you can make money with a Ball Conditioner

If you’re not making money with your ball conditioner…it’s because:

You don’t have oneThe one you have is out of orderThe one you have doesn’t polish ballsYou’re charging a 1950’s/1960’s priceYou don’t have a ZOT “GlossBoss” Ball Conditioner

Promoting your Ball Conditioner Pay Attention and Keep the Ball Conditioner in Adjustment: This is really easy to do, yet it’sthe number one reason ball conditioners do not yield their poten-tial in terms of revenues and profits. If a ball conditioner does notpolish balls, bowlers won’t use it. It’s as simple as that.

Promotion, Promotion, Promotion: Typically a ball conditioner isused by about 6 percent of bowlers a week, providing of course,the unit functions properly. With just a little promotion, this per-centage can be substantially increased.

Features and Benefits

Customer Friendly Display: The customer display screenshows price, money’s deposited, cycle-time and cycle-time remaining, plus house-ball and Sold-out modes.

Four Easy-to-Program Price Levels: A simple two-but-ton operation. Hold down one button and pulse theother until the illuminated LCD’s on the Display panelshow the desired Price levels This feature enables youto periodically increase the price as and when desired.

Four Easy-to-Program Run Times: A simple two-buttonoperation. Enables you to adjust the run times to maxi-mize revenues and the number of users.

Electronic Coin Validator: Programmable for promo-tional tokens and single coins of any denomination(e.g. Quarters or Dollar Coins in the US) and most cur-rencies, subject to size (maximum 34mm diameter and3.4mm thick).

Bill Acceptor: ZOT’s internally mounted Bill Acceptorwill typically increase machine usage anywhere from15 – 30 percent. A ZOT Bill Acceptor also reduces thefrequency in making change for customers, andmakes cashing out the machine easier.

Mechanical Compound Advance System: A time test-ed proven system makes it easy to maintain a highquality polish without the constant need for adjust-ment and readjustment.

Easy-Adjust Buffer Shaft: Enables you to easily setthe buffing wheel adjustment correctly and guaranteethe Ball Conditioner “Really Polishes Bowling Balls”,ball after ball after ball. Simply loosen six bolts androtate a calibrated jackscrew each time the com-pound block is replaced.

Double-ended Bearing Support on Buffing Wheel:Makes wheel replacement easy and yields a smoothrunning operation without the tricky balancing exerciserequired with older machines.

Scrolling Message and Advertising Display: This easyto program multi-color digital display enables centersto develop their own promotional and advertising mes-sages to their customers.

Buffer Pressure Meter: Takes the guesswork out ofmeasuring the pressure between the buffing wheeland surface of bowling ball for optimal ball polishingperformance.

Customer Friendly Display:

with LCD display for Price, Coin Intake,

Cycle Time Paid, & Cycle Time Remaining

Mechanical CompoundAdvance System:

The industriesmost popular and

dependable CompoundAdvance System

Easy to ProgramControl Box: enables programmingand management ofFour Price and RunTime (Gloss) Levels.

Buffer Pressure Meter:along with ZOT’sUnique Easy-AdjustBuffer Shaft makessetting buffer pressure easy and guarantees agreat polish for yourbowlers … every time.

Introducing the ZOT GlossBoss II #420398

If you have a small center, or a center with a minimal number of league bowlers (e.g.350 or fewer) or are simply just not ready to invest in a machine that includes all thebells and whistles, ZOT’s new GlossBoss II may be just the answer.

The GlossBoss II has fewer features than the original machine – but retains the samehigh polishing performance – and all for a price tag that is more than 20-percentless than a GlossBoss.

“It only takes ‘ONE’ ball polish a day to pay for thelease to buy program on a GlossBoss II machine.”

ZOT Ball Conditioner Restoration and Conversion Kits

If you’re not quite ready for a GlossBoss or GlossBoss II but have an old ballconditioner that’s not functioning, ZOT manufactures restoration and conver-sion kits that are compatible to most brands’ ball-conditioners. For more details, see pages 12, 13, 14 and 15.

*Bill Acceptor: that typically

increases machine usage by

15-30%

*Replaced with electronic coinvalidatorfor non-USA markets.

(continued)

2

BallConditioner

12


Coin Conversion and Cosmetic Kit#420348*

Front panel Coin mechanism Coin box

Top overlay and ring

Contents:Control Panel: A complete replacement for the original Control Panel, which both enhances the

overall cosmetic appearance of the unit, and brings the following features and benefits:• Easy-To-Read LCD Price Display.• Coin Intake Level Display (from 1 - 99 coins).• Cycle Time Paid Display.• Remaining Cycle Time Display.• “Sold Out” Display: Indicating that the unit is out of compound.• New Start Switch.

Replacement Control Box: A Solid-State PC Board Driven Control Box that replaces the originalStepper Coil, and Coin Accumulator. The Control Box also obsoletes the ball door motor andits six cam switches. Check out these additional features:• Easy-To-Read, Easy-To-Adjust, PC Mounted Display and Buttons: Makes setting

and changing price and run times as easy as setting a two-button digital clock.• Four Easy-To-Program Coin Intake (Gloss Cycle) Levels:

Giving you total control over coin-cycle time combinations.• House Ball Cycle Time Setting.• Cycle Time Capability: 1-10 Easy-to-Program minutes, in 1-minute increments.• Enables Easy Changeover From 115V Lustre KING, to 230V.• Keeps a Running Total: of money intake and minutes of run-time.

Replacement Ball Door Cover, Handle and Seal: Enables the ball door to be opened manually,and features an easy-to-change replacement Seal, which does not require gluing. The DoorCover and Handle are in a neutral color.

Control Box Conversion Kit#420342

Gloss cycle level button Increase time button

Increase coins button

Displays number ofcoins programmed

Displays number ofminutes programmed

“Lustre King Ball Conditioner Restoration and Conversion Kitsfor Increased Revenues…and Customer Satisfaction”If you have a Lustre KING, that’s either not functioning at its best, ornot functioning at all, ZOT has the most cost effective solution toboth restore the unit, and improve its overall performance.ZOT’s Lustre KING Restoration and Conversion Kit's make it possible foryou to bring the 1970’s price you’ve been charging, into the NewMillennium, and to maximize on revenues during high demand times,like just before League and Tournament play.

By being able to easily increase the fees by one third, anddecreasing the run timed by 30% you will more than double yourrevenues…and improve customer satisfaction at the same time,since the unit will function so much better.ZOT offers seven Conversion Kits for the Lustre KING that add ben-efits which are more suitable to your everyday business needs.

Coin Mechanism:• Inexpensive yet Rugged

Construction, for Quarters** only.• Includes Coin Block Out (for

House Ball Cycle and when the unit is out of Compound).

** Domestic (U.S.) Application. International Applicationsalso available.

Coin Box:• Expanded Coin Capacity (up

to $400 in Quarters).• New Lock and Key.

Top Overlay Panel:• Easy to Install, Drill and Pop

Rivet installation.• Includes new Ball Holder Ring.

Simple to clear jamsand clean

*The Coin Conversion and Cosmetic Kit is designed as an add-on to ZOT’s Control Box Conversion Kit #420342. It will notfunction as a stand-alone product. This Kit is compatible to all models of Lustre KING, but it is an‘Essential Requirement’ for earlier models that presently havea multi-denomination coin validator.

Contents:Front Panel:

• Front mounted Quick Release Coin Mechanism, making Coin Jams Easy-to-Clear, and the mechanism Easy-to-Clean.

2

BallConditioner

14


Electronic Coin Validator Kit#400202This kit requires #420342 to function. It will not function as a stand-alone product.

• Programmable: to accept a Single Coin as primary payment, and a Promotional Token,for a total polish. (e.g., Quarters, Dollar Coins and Tokens for U.S.)• Any Denomination and Currency: The Validator can be programmed for a Single Coin of any Denominationor Currency, up to a maximum size of 34mm in diameter. and 3.4mm thick. (Programmed at ZOT, or by a par-ticipating ZOT Distributor).• Creates New Customers & Greater Profits: The Promotional Tokens are designed to create new BallConditioner Customers and Greater Profits. A Token Promotion program only needs to develop nine newusers in a single league season, to pay for Electronic Coin Validator. On a 1,000 Token promotion, that’s lessthan one percent success rate.

Note:• Machines with ZOT 1 Control Boards will require a P. C. Board upgrade. Contact ZOT for details.• 25 each Free Ball Polish Tokens – Order #400206

The ZOT Programmable Message Display is a Stand-Alone, Add-On prod-uct that’s compatible to the Lustre KING and Lustre KLEEN, and manyother brands of ball conditioner, including AMF and Perry Austen.Contents:Programmable Message Display, Includes:

• All Mounting Hardware• Power Cord and Plug• Easy-to-Use Remote Control Programmer for Fast and Easy

programming of announcements and message displays.

Scrolling Message Display Kit#400156

ZOT’s Scrolling Message Display replaces the original ‘back-lit’ sign, enablingEasy-to-Program announcements and advertising to bowlers. This attractiveelectronic Message Center, with its bright scrolling digital display, can be easilyprogrammed to inform your bowlers of forthcoming events (Leagues andTournaments) honor scores, and the benefit of using the unit itself. e.g., “add ahigh scoring gloss to your ball.”

Side-Door Cosmetic Kit#420349ZOT’s Side-Door Kit completes the conversion of yourBall Conditioners cosmetic appearance.Contents:2 Each Side Doors:

• All Welded Steel Construction• Powder Coated, Neutral Color

2 Each ‘T’ Handle & Locks:• Interchanges with Brunswick Parts

Lock Stem & Lock Stem Angle:• Includes all related hardware for conversion.

Lower Support Angle:• New Lower Adjustable Height Angles.• New Bumper Grommets

The Side-Door Kit caneither be used with#420342 and #420348,or as a stand-alone product, which may bepurchased separately.

#400206 Ball PolishPromotion Tokens

Compound Applicator Gear Assembly#420377**This kit requires ZOT #400182 to function. It will not function as a stand-alone product.

Superior Coumpound Advanced Design: A ZOT Manufactured Gear Assembly, in the style of a Lustre KlNGgear assembly, is now available as a retrofit kit for a Lustre KLEEN. ZOT’s More-Positive gear driveCompound Advance system kit solves the Lustre KLEEN’s constant ‘Out-of-Adjustment’ problem.

Improved Ball Polish: Results in Improved Customer Satisfaction and makes it possible for you toincrease the price, and reduce the run time, thereby increasing the potential number of users during peaktimes.

Contents:

1 Compound Advance Gear Assembly Proven Product: An assembly that’s proven itself on the Lustre KING. The Gear Assembly thatpositively advances the entire compound block, without needing constant adjustments. Eliminates Waste: Stop discarding halfused compound blocks because a less efficient advance system has resulted in the compound surface becoming glazed.

2 Drive System: Includes all Sprocket and Chain assemblies necessary to advance the entire compound block.

2

Bal

lCon

diti

oner

15


For all Lustre KING, Lustre KLEEN, AMF Ball Performance Center & Perry Austen Gleam Machines

“If your Ball Conditioner does not really polish balls, the Buffing Wheel may be out of adjustment”

• Easy-To-Adjust: ZOT has designed special nut plates to secure the Bearing Housing and the Altered PillowBlock…thereby eliminating all the securing nuts. Each time you need to advance the buffing wheel (e.g., whenreplacing a block of compound), simply loosen the six bolts securing the buffing shaft and rotate the addedjackscrew. You no longer need to use a wrench on the outside of the machine.

• Buffing Wheel Wear and Use Indication: Calibrations on the ZOT Bracket clearly indicate the amount of adjust-ment you’ve made and, ultimately, when to install a new buffing wheel.

• Improved Belt Tracking - Eliminates Flat Belt Tracking Problems: ZOT’s Link type ‘V’ beltsystem technology provides a more positive power transfer from the motor to thebuffing wheel, than the original flat belt. The ZOT Link style ‘V’ belt system is espe-cially effective in providing a more positive power transfer as the center to centerpulley measurement changes from the extreme of a new to an old buffing wheel.And, as the belt wears (stretches) over the years, it’s a simple task to remove a linkto increase or reestablish belt tension.

• Positive Wheel/Shaft Secure System: The outside ‘V’ belt pulley on the buffer shaftfeatures flat surfaces that enable you to attach a wrench, when securing the left-hand-threaded jam-nuts, which enables you to easily secure the buffing wheelto the shaft.

Buffer Shaft Conversion Kit#420392Replacements:The “Lustre King” Buffer Shaft Conversion Kit replacesall buffer shafts that utilize a “Balancing Disk”

Easy-Adjust Buffer Kit#420426Replacements:The “Lustre King” Buffer Shaft Conversion Kit#420392 is required to install this kit.

1210

86

42

0

GlossBoss Buffing Compound# 420416 (two blocks per box)

• Same formula that major bowling ball manufacturers use tofactory finish new bowling balls

• Designed and formulated togive a superior polish to allbowling ball composi-tions including:Urethane, Reactive,Particle, Plastic andRubber.

• Date stamped for shelf-life verification

Buffing Wheel# 820017• Longest lasting buffing wheel in

the industry.

• Superior compound transfer tobuffing wheel and ball.

• Non-corrosive black powdercoated steel hub.

Note:Always check the condition of thespacers when replacing the bufferwheel.

Lustre King Spacer Kit #420374Lustre Kleen Spacer Kit #420399

2

BallConditioner

16


Buffer Pressure Meter Kit#420455

• The Kit enables you toset and check the pres-sure (Friction Level)between the buffingwheel and the bowlingball for optimal ball pol-ishing performance.

• The kit comprises an AMP meter that connects to the motor and measuresthe load on the motor during the polishing cycle.

Note:Take the guesswork out of the equation, and replace it with an exact science.

Ball Conditioner Operations, Service &Parts Explosion Manual#160179• Complete Operations, Adjustments, Service and

Parts Breakdown.

• For ZOT GlossBoss, Brunswick BallWorx andmany parts for Lustre King & Lustre Kleen.

Urethane Brake Roller#810053

• Urethane Brake Rollers are moredurable than rubber rollers.

• Oil Resistant: ZOT’s Urethane BrakeRollers prevent readjustments neces-sary when rubber rollers become sat-urated with oil and swell.

Urethane Cradle Roller#420381

Note:• Order 4 rollers per machine• Bronze Bearing included

Micro Switch (Wiper style)#300031

Micro Switch (Bearing style)#300032

Coin Mechanism#800063Lustre King (Quarters Only)

#800073Lustre Kleen, AMF/Century, Perry AustenDirect Replacement for Original Equipment

Printed Circuit Board Kit#400182

For Brunswick Lustre Kleen,AMF/Century and Perry Austen

A complete replacement for an originalPC Board with many added features andbenefits, including:

• Easy to Program Price Levels

• Add Bill Acceptor

• Add Gear Style Compound Applicator

Note:Includes circuit to plug-in and run a Bill Acceptor & LCD Price Display.

Air Filter#820015New and/or clean air filters ensureoptimal ventilation for better orimproved machine performance.

T-Handle Lock Assembly with Key#LK-A16(for Lustre Kleen only)

#420444Universal - for all other machines

Note:Zot recommends replacing air filtersas necessary,but at least everysix-months.

Motor#200011220/110V-50/60Hz – 1HP

• Replaces all previous original motorsexcept for GE Motors with externally boxmounted capacitors (AKA Short Motor –call for details).

Capacitors#211216

Urethane Oscillator Bumper Kit#420415• All the durability of a Urethane for

a much longer life than rubberproducts

Note:Order 2-Kits per machine

Lustre Kleen Buffer Shaft#520136

• Direct Replacement for Lustre Kleen

• To Convert a Lustre King to a Double Bearing Support, order Kit #420392

3

Glo

w B

owlin

gPr

oduc

ts

17

“Help for Dual Pindeck Lamp Fixtures”

Glo

w B

owlin

gPr

oduc

ts

Glow Bowling Products

Item ZOT# Description1A 290008 Single Lamp Ballast (115V/60Hz)

(6-wire multi purpose 34, 35, & 40 Watt)1B 290019 Double Lamp Ballast (115V/60Hz)

(8-wire multi purpose 34, 35, & 40 Watt)2A 240009 48” Lamp F40 T12 BLB (Black Light Blue)2B 240016 48” Lamp F40 T12 BL (Black Light)2C 240011 48” Lamp F40 T12 D (Day Light)2D 240017 48” Lamp F40 T12 IR (Infrared Light)3A 300023 Toggle Switch (SPDT) (Rear Machine Control)3B 300026 Toggle Switch (DPDT) (Front Desk Control)

Item ZOT# Description4A 620162 Switch Bracket (Rear Machines Control)4B 400163 Switch Bracket (Front Desk Control)5 330029 Spring Loaded Lamp Socket (ZOT)6 330030 Stationary Lamp Socket (ZOT)7 620165 ZOT Ballast Cover8A 431049 PC Board Only (ZOT Relay Controller)8B 431054 PC Board Only (Brunswick Relay Controller)9 312003 Wire 2 Conductor 18 Gauge (Order by the foot)10 400160 Transformer (Front Desk Control)11 440058 Wire Harness 2 Conductor 14 ft. (Relay Controller)12 330051 48” Infrared Lamp Cover (Navy Blue)

Note: To order individual parts refer to parts grid shown below

Spare Parts for Pindeck Lights

8B 1A, B 4A

1011

8A

2A, B, C, D

3A

5

6

74B 3B

9

12

Pindeck Light Relay Control#400154

Note: One Relay Controller operates a pair of lanes. Requires one Two-Conductor Wire runsper 24-lanes (not included) to connect Front Desk Transformer & Switch Kit to Curtain Wall.Order #312003 (order by the foot). Requires one #400162 to operate up to 24-lanes.


Replaces Toggle Switch at Rear of Pinsetterwith Relay Controller: Enables switching fromWhite to Black (Glow) light to be managedfrom the Front Desk, Mechanics Tool Room orany other remote location as needed.

Enables switching from White to Black(Glow) Light on up to 24-lanes in unison.

Curtain Wall

Lane 6Lane 5

Lane 4Lane 3 Lane 2 Lane 1

Wiresextend to Lightfixtures(Included)

Wire extends toTransformer SwitchKit

3

Glow

Bow

lingProducts

18


Glo

w B

owlin

gPr

oduc

ts

Some thoughts about Glow Bowling

Recreation centers – centers that have theflexibility to provide an environment forboth entertainment and sport bowling – arecenters that make the most money and thehighest profits for proprietors today.

And, there’s no better place to start intro-ducing Glow Bowling than at thepindeck…by adding ZOT Glow Pindeck Lightor GlowVision fixtures. Some proprietorshave done it the other way around, addedGlow lighting to everything in their cen-ter…except the pindeck.

“Those proprietors have missed the point.”Whether we’re talking about Sport orRecreation bowling, the game’s aboutpins…and trying to knock them down. And,if the pins don’t “Glow” you’re really not inthe Glow Bowling business.

Adding ZOT Glow Pindeck or GlowVisionLights is also the quickest and least expen-sive way to get started in the Glow bowlingbusiness. Combine a Glow Pindeck with agood promotion plan, and your customersand your business will both profit from theGlow Bowling Experience.

Control up to 24-lanes with One Switch with ZOT’s Front Desk Switch ControlLogically the First Choice

When ZOT researched and developed itsGlow Pindeck Light system it was obviousthat proprietors were looking for optionsthat are the best fit for their individual cen-ter needs. For example, switch control*options that enable switching from white(sport bowling) to ultra-violet (recreationbowling) light from the front desk, or therear of the pinsetting machine.

Both are better options than other brandsoffered that has the switch control on thefixture…which requires the mechanic towalk across the lanes to access theswitch…and, in full view of your customers.For more details on ZOT GlowVision andTwo-Lamp Glow Pindeck light systemscontact your ZOT Distributor.

Note: Pindeck Lights are powered (turnedon and off) by the Pinsetter. Pindeck LightSwitch Controls change the lights fromWhite to Black (Glow) and vice versa…theydo not turn the Pindeck lights on or off.

Control Each Lane Individually with ZOT’s Switch Control on the Rear of thePinsetting machine

ZOT Brand Relay Box Switch Control included with Front DeskControlled Glow Pindeck Light fixture

ZOT Two-conductor Wire #312003Order by the foot (Order Separately)

Transformer & Switch Kit #400162See page 21 (Order Separately)

ZOT Brand Switch &Bracket included in RearMount Controlled GlowPindeck Light fixture

Take Control of Your Fixtures

3

Glo

w B

owlin

gPr

oduc

ts

19


Glow

Bow

lingProducts

When you order either of the above partnumbers you will also require:

A. One length run of wire #312003 for up to24-lanes to extend from Curtain wall toFront Desk (order by the foot).

B. One each #400162 Transformer & SwitchKit (serves up to 24-lanes).

All it takes is a flip of a switch to convertyour center from a Sport to Recreation cen-ter…and it starts with ZOT Two-Lamp GlowPindeck Lights

ZOT Two-Lamp Glow Pindeck Light Fixture“An opportunity that’s too good to miss! ZOT’s Two-Lamp Glow Pindeck Light costs lessthan replacing an original Brunswick single lamp fixture”

Front Desk Switching Option (See page 18 for control)#420335 (115V/60Hz)

For all Domestic (US) applications, andsome overseas markets, as appropriate.

#420354 (230V/50Hz)

For some overseas markets, as appropriate.

This option enables switching fromWhite to Black Light on all lanes in uni-son from the Front Desk.

One lamp forSport Bowling

Note: For every two units you order of eitherof the above part numbers ZOT automaticallyincludes one Relay Box Switch Control and14’ of connecting wire for every two units.

Note: Order In Pairs

Transformer & Switch Kit(Order Separately)

Spring Loaded Lamp Socket

Rear of Pinsetter SwitchingOption (See page 18 for control)#420333 (115V/60Hz)


#420341 (230V/50Hz)


This option enables easy switchingfrom White to Black light lane by lanefrom the rear of the pinsetter. Each unitcomes complete with a Toggle Switchand mounting bracket.

One lamp forRecreation Bowling


Welded Steel Construction: ZOT’s Two Lamp Glow Pindeck light fixtures are built with 20-gauge steel and will withstand years of excessive vibration in the pindeck area.

Spring Loaded Lamp Sockets: ZOT includes Industrial Style Spring Loaded lamp socketsdesigned to extend lamp life and prevent lamps from shaking loose and shattering onthe pindeck. (see illustration)

High Power Ballast: Each ZOT fixture includes Two High-Power Ballast’s that yield reliableservice and a wide range of power supply.

Compatibility: The ZOT Ballast’s are compatible with the original Brunswick lamps,enabling reuse of lamps you already have. And the mounting holes on the ZOT fixture areof the same dimensions as the original ‘A2’ and Jetback Single lamp fixture.

Switching Options Suit Your Needs: ZOT offers the option of switching from Sport toRecreation (Glow) Bowling from the Front to Desk or the Rear of the Pinsetter.

Light Reflective Finish: ZOT’s Unique formula Ultra-White finish reflects a high degree ofUltra-Violet light onto the pindeck.

ZOT’s Two-Lamp Glow Pindeck light fixtures are recommended for centers with the fol-lowing scoring systems:

• AMF MagicScore • AMF AccuScore*

• Brunswick AS 80 • AMF AccuScore Plus*

• AMF Boss Scoring • Brunswick FrameWorx with VPS Cameras & Vector Scoring

and many other current model scoring systems available from independents, including:Qubica, Steltronic & Twelve-Strike.

*May require camera software upgrade - call for details.

3

Glow

Bow

lingProducts

20


Glo

w B

owlin

gPr

oduc

ts

Replacement Pit Light BallastFor Brunswick Brand OriginalPit Lights#290008


Adjust to Power Demands: This 115V/60HzHigh Power Factor unit operates in high orlow voltage conditions, adjusting to powerdemands as necessary.

Universal Operation: This Ballast will oper-ate with either the old style 40 WattDaylight lamps, or with the newer style34/35 Watt Energy Saver lamps. The Ballastautomatically adjusts the power (AMP) toprovide the correct output.

Universal Lamp SocketFor Brunswick Brand OriginalPit Lights(American or Japanese)

#420373


Industrial Style: Spring Loaded LampSockets prevent lamps from shaking loose,and shattering on the pindeck.

Adapts to Other Brands: The UniversalLamp Socket can be made to fit otherbrands, with minimal modifications.

“ZOT’s 3-Lamp GlowVision costs less…a lot less…than the original manufacturer’s 2-Lamp fixture.”

765

8 1 698 107 ??

One lamp forRecreation Bowling

One lamp forSport Bowling

One Lamp to virtually EliminateScoring Miscounts

Light Spectrum

DaylightVisible

Ultra VioletBlack Light

InfraredWhite Light

Too light to seeToo dark to see

Ultra Violet light is at the Low-End of the Light Spectrum; Infrared Light is at the High-End of the Light Spectrum. Brunswick CCD Cameras are designed to perform best on the mid-rangeof the light spectrum. By having the Ultra Violet and Infrared lamps lit simultaneously, ZOT’sGlowVision has maximum compatibility with the CCD cameras range in the light spectrum.

Here’s How and Why ZOT’s GlowVision Works

Combining a Black Light Blue Lampwith an Infrared Lamp substantiallyenhances a CCD Camera’s ability toread pins…thereby virtually“Eliminating Scoring Miscounts”

ZOT has filtered the White Light fromthe Infrared lamp to maintain thebright blue “Glow” effect of the BlackLight Blue Lamp; while still improvingthe camera’s ability to read pins.

ZOT GlowVisionA 3-Lamp Glow Pindeck Light that virtually “Eliminates

Scoring Miscounts” in a Glow Bowling environment.

ZOT’s GlowVision Pindeck Light Fixture is recommended for centers that have one of thefollowing scoring systems:

• Brunswick AS90 • Brunswick FrameWorx with CCD Cameras

• Brunswick ASK • Brunswick AS80 Upgrade to CCD-AS90

and other alternative scoring systems, e.g., Mendez, Dacos, VanTech ComScore, etc.


3

Glo

w B

owlin

gPr

oduc

ts

21


Glow

Bow

lingProducts

Transformer and Switch Kit#400162 (115V/60Hz) Transformer and Switch Kit

#400212 (230V/50Hz) Transformer and Switch Kit


Transformer: Plugs into wall outletand send 12Volt DC to Controller.Switch Kit: Includes Mounting Box.

Note: One transformer and switchkit required for every 24-lanes.

Some overseas applications mayrequire a different transformer tothose listed. If the transformer isbeing sourced locally, to purchasethe Switch and Mounting Box only,order: #400163.

When you order either of the above partnumbers you will also require:

A. One length run of wire #312003 for up to24-lanes to extend from Curtain wall toFront Desk (order by the foot).

B. One each #400162 Transformer & SwitchKit (serves up to 24-lanes).

ZOT GlowVision Pindeck Light Fixture“A 3-lamp Glow Pindeck Light that virtually eliminates scoring miscounts in a Glow Bowling environment”“An opportunity that’s too good to miss! ZOT’s GlowVision Pindeck Light costs less than replacing an original Brunswick double lamp fixture”

Front Desk Switching Option (See page 18 for control)#420465 (115V/60Hz)


#420466 (230V/50Hz)


This option enables switching fromWhite to Black Light on all lanes in uni-son from the Front Desk.

Note: For every two units you order either ofthe above part numbers ZOT automaticallyincludes one Relay Box Switch Control and14’ of connecting wire for every two units.

Note: Order In Pairs

Transformer & Switch Kit(Order Separately)

See Below

Spring Loaded Lamp Socket

Rear of Pinsetter SwitchingOption (See page 18 for control)#420464 (115V/60Hz)


#420467 (230V/50Hz)


This option enables easy switching fromWhite to Black light lane by lane fromthe rear of the pinsetter. Each unitcomes complete with a Toggle Switchand mounting bracket.


Switching Options to Suit Your Needs:ZOT offers the option of switching fromSport to Recreation (Glow) Bowling fromthe Front Desk, or the Rear of thePinsetter.

ZOT’s GlowVision Unit Includes: OneInfrared Lamp and Visible Light Filter. TheBlack Light Blue and White Lamps are notincluded.

If you have Brunswick CCD or earliermodels of other brands of cameras withyour scoring system, and you’ve beenholding off buying Glow Pindeck Lightsfor your center because you’ve heardabout the high incidence oof scoring mis-counts…your worries are over.

With ZOT’s new GlowVision, a customdesigned and custom built 3-Lamp GlowPindeck Light Fixture, the incidence ofscoring miscounts has been virtuallyeliminated.

(continued)

4

ElectronicTriggering

22

Electronic Triggering

For Triggering Brunswick Pinsetters“At last! The product that customers have been asking for…a Pinsetter Triggering & Scanner Ball DetectorSystem…combined in ‘ONE’ product.”Triggering Improvements that Promote Bowling Features and Benefits

World Class PC Design: ZOT’s new Micro-Processor technology simplifies the circuit,making the ET 2001 (Electronic Triggering)Dual Lane Ball Detector surprisingly cost-efficient.

Superior Sensor Design: The ET 2001retains the same sensor design as ZOT’s sin-gle-lane Magic Eye. With more than adecade in the marketplace, this miniatureand ruggedly constructed sensor systemhas a proven track record of minimizingdamage by balls and pins; and it’s not sen-sitive to vibration.

Alignment Indicator: ZOT’s ET 2001 featuresan exclusive 4-unit LED system, that indi-cates when the sensors signal is strongest.The LED’s can be viewed from either the sen-sor area, or from the top of the pinsetter,without opening the cover.

Control Box Protection: ZOT’s Dual LaneControl Box mounts on the back of themasking unit curtain wall, out of the way ofpotential damage by balls or pins.

Infrared Technology: The ET 2001 featuresan Infrared Sensor source that’s Solid StateDiode Rated for millions of hours ofdependable service.

Safety System: The ET 2001 has a built-inSafety System which prevents the machinefrom cycling if a person is in the area wherethe sensors are mounted.

All Modular Design: All components pluginto the PC Board separately, making it pos-sible and easy to change parts, and trou-bleshoot.

Remote Trigger Ports: ZOT’s ET 2001 can betriggered by external sources, e.g., scoringsystem remote switch.

Diagnostic Indicator: ZOT has added an LEDsystem which indicates when an outputsignal is occurring.

ET 2001 “Dual Lane” Electronic Triggering#400130 (115V/60Hz) #400036 (230V/50Hz)

ZOT’s ET 2001 “Dual Lane” ElectronicTriggering, for Brunswick Pinsetters, fea-tures the latest and most advancedinfrared technology available in the indus-try, to guarantee 100% PositiveTriggering…ball after ball after ball…youknow it makes sense.

It only takes a few seconds a game to savethousands of dollars a year in lost linage,revenues, power consumption, andmachine wear and tear – and to improvecustomer satisfaction levels.

At bowling centers everywhere, you see

youngsters, seniors, and bowlers usinglight balls – especially in centers withbumper bowling – frustrated, and wastingtime, either because they’re slow to react inpressing the reset button, or because theydon’t know what to do, when the machinefails to cycle.

That same few seconds will pay for ZOT’s ET2001 “Dual Lane” Electronic Triggering sys-tem several times over in its first year, and,thereafter, the additional revenues, savingsand improved customer relations, translateinto clear, and measurable, increased profits.

Adjustable New Alignment Time Delay LED’s


4

Elec

tron

icTr

igge

ring

23


Features and Benefits(continued)

Simple Installation: ZOT’s ET 2001 installsin three easy steps:

1. Wall transformer plugs into 115 Volt out-let for power supply.

2. Two conductor outputs for each Pinsettersimply quick-splice to the bowlers reset but-ton wires.

3. The Infrared Emitter and Receiver are sim-ply plugged in, leveled and secured at eachlane.

Note: The ET 2001 has two adjustable timedelay outputs, each of which serve two lanes.

Reduces Wear/Eliminates ScoringMiscounts: The ET 2001 is secondary to thetriggering system on Brunswick machines,which:

1. Reduces wear and tear on the take datarelay.

2. Eliminates scoring miscounts becauseBrunswick’s scoring system is activatedfrom the cluster gears.

Rake/Sweep Path Sensor Mounting: TheSensors can be mounted behind theRake/Sweep (in the Rake/Sweep path).

Note: The Kit for Brunswick Machinesincludes two Mercury Switches, to facilitatethis feature.

Flip Top Cover: The Control Box Cover hingesfrom the top, which means no screwdriver isneeded to view the PC Board. Simply flipthe cover up for inspection, and down againwhen finished.

Rake Down Diagnostic Indicator:The ET2001 for Brunswick machines, features an‘Active Rake Down’ indicator.

ET 2000 & ET 2001 Spare Parts 115V &230V:

Description Part NumberSpare Parts Kit #400072PC Board #432052Blue Emitter Block #400001Flat Gray Emitter Cable #450005Gray Receiver Block #400133Transformer for 115V #290005 Transformer for 230V #290006Sensor Shims #400121Sensor Lens Kit #400032

ZOT Unit Replaces two Brunswick#57-214904-000

ZOT Unit Replaces 79 ScannerBall Detect

Remote Trigger Ports

Note: To activate the Brunswick Scoring Feature this product requires a specific harness(see below for details)

Optional Ball Detect for Brunswick Scoring

If you’re dissatisfied with your present AS80 and AS90 Series Ball Detect System, the ZOT ET2001’s ability to double as an improvement to your automatic scoring system makes it themost cost effective ball detect system available.

The following are the wire harness options necessary to activate the automatic scoring balldetect feature: (The wire harness options below are only compatible to ZOT ET 2001).

#400159 Brunswick AS 79 Scanner#440080 Brunswick AS 86 Scanner#400194 Brunswick AS 90 Camera & FrameWorx

Note: Wire harness options are onlycompatible to ZOT ET 2001

4



24

Single Mercury SwitchFor Use as a Manual PC Board Reset KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetterswith ZOT Triggering

#400021Sensor Location: This feature enables you toinstall the ball detector sensors within therake sweep path, which is preferable.

Note: 1. #440045 wire harness requiredwhen installing to ZOT Magic Eye or TimeDelay Plus Systems.

Note: 2. #450007 wire harness requiredwhen installing to ZOT ET 2001 Systems.

Spare Parts for Older Model ZOT Triggering ZOT’s Electronic Triggering related products are Unique in the industry because they are modular by design, enabling themechanic to replace the various components – right there in the bowling center.

AG

B A

B

C

I

E

F

H

A B C D E F G H I

Kit Emitter Flat Grey Receiver Coaxial XFormer/Sales Designed PC Blue Emitter Gray Receiver Power Sensor Sensor

Item Kit Description Number For Board Fuse Block Cable Block Cable Cable Shims Lens Kit

1 Super Dual 400042 Straight ‘A’ 400011 400084* 400001 450001 400005 450002 440008 400121* 400032*(6 ea.) *(25 ea.)

2a Super Single 400043 ‘A2’ & Jetback 400012 400084* 400001 450001 400005 450002 440001 400121* 400032(Relay Output/Trigger Switch)

b Super Single 400044 ‘A2’ & Jetback 400012 400084* 400001 450001 400005 450002 440002 400121* 400032(Voltage Output/Rake Solenoid)

c Super Single 400041 Straight ‘A’ 400012 400084* 400001 450001 400005 450002 440003 400121* 400032(Relay Output/Mercury Switch)

d Super Single 400040 Straight ‘A’ 400012 400084* 400001 450001 400005 450002 440004 400121* 400032(Voltage Output/Gearbox Solenoid) *(6 ea.) *(25 ea.)

3 Mini-Magic 400008 ‘A2’ & Jetback 400009 400083* 400001 450001 400005 450002 440009 400121* 400032Relay *(6 ea.) *(25 ea.)

4 Mini-Magic 400007 ‘A2’ & Jetback 400010 400082* 400001 450001 400005 450002 440010 400121* 400032Power *(6 ea.) *(25 ea.)

5 Power 400106 Straight ‘A’, 431003 N/A N/A N/A N/A N/A 440037 N/A N/ARectifiers Jetback & ‘A2’

6 Magic-Eye 42050-0 Straight ‘A’, 400012 400084* 400001** 450001** 400005 450002 Same as 400121* 4000321988 Jetback & ‘A2’ *(6 ea.) Corresponding *(25 ea.)**when replacing original single-unit, order both emitter and cable Super-Single

Kit Sales Equipment Mercury WireItem Kit Description Number Type Switch Solenoid Harness

7a Mercury Switch 400021 N/A 400022 N/A 440011b Rake Trip By-Pass 400107 N/A 400109 N/A N/Ac Double Switch 400108 N/A 400109 & N/A N/A

400022d Reset Lockout Switch 10170-0 N/A 400022 N/A N/A

8 Rake Trip 420164 N/A N/A 400024 440011

9 Gearbox Trip 420001 N/A N/A 400024 N/A

10 Fast Drop Rake 420159 N/A N/A 400024 440011

11 Alternative Power Supply 24-VAC 400153 N/A N/A N/A N/A

In the Chart below you will find details of ZOT’s replacement Spare Parts for Triggeringrelated products.

Mini-Magic Eye PC BoardShown

Photo Cell Sensor #400023

4

Elec

tron

icTr

igge

ring


25

Universal Time Delay ‘Plus’ ModuleFor Brunswick ‘A2’ and Jetback Pinsetters

#400149

Features & Benefits

Diagnostic Indicators: LED’s clearly indi-cate: when the Module is powered, whenan output signal is occurring, rake downand second ball.

Reset Button Lockout: Reading the RakeDown: preventing hanging 180’s.

Microprocessor Design: ZOT’s simplifiedcircuitry design: is cost effective and reli-able … making it possible for ZOT to addseveral innovative and exciting features.

Direct Replacement: The Only DirectReplacement Available: that enables you toadd Electronic Triggering.

Integrated ‘Take-Data’ Signal: The ZOTproduct can obsolete: the Brunswick Take-Data Relay Board. For Brunswick Scoringsystems only: Take-Data is initiated whencushion impact does not drop the rake,and a scoring signal is needed simultane-ously to the machine cycling, because therake and deck come down at the sametime.

All Modular Design: Troubleshooting iseasy: all components plug into the ZOT PCBoard independently, making componentexchanges fast and easy.

Adjustable Time Delay: Easily adjustable:from 3/4 of a second to 8-seconds.

The Time Delay ‘Plus’ from ZOT PinsetterParts is a standalone product that’s a DirectReplacement for all brands of time delaymodules on American and JapaneseBrunswick ‘A2’ and JetBack Pinsetters.

The wiring sequence for the ZOT product isidentical to other brands, including the orig-inal Brunswick Time Delay Module whichmakes installation fast and easy. Simplydetach the wires from the old module andattach them to the ZOT Time Delay ‘Plus’ inthe same order.

For information about optional add-on products see pages 26 and 27.

MustHave

“Direct Replacement”

“Great Price”

Adjustable

Time Delay

Sensor

Alignment

LED’s

Diagnostic

Indicator

4



26

Elec

tron

icTr

igge

ring

Universal Time Delay ‘Plus’ Module#400149

ZOT’s wiring sequence is identical to theoriginal Brunswick time delay module andother brands. Just disconnect from old mod-ule and attach them to the Time Delay ‘Plus’in the same order.

Spare Parts:#431046 PC Board

Features & Benefits

Infrared Technology: The ZOT System hasSolid-State Diodes rated for years ofdependable service. The sensors are notaffected by ambient light.

Rake Path Sensor Mounting: The sensorscan be mounted behind the Rake, in theRake path. The benefits of mounting thesensors on the kickbacks are: No interfer-ence wi th bumper systems, timing starts asball hits the pins.

Alignment Indication: The ZOT System hasan exclusive 4-Unit LED system that indi-cates when the sensor signal is strongest.

Superior Sensor Design: The ZOT Systemhas an Emitter & Receiver making the sys-tem more reliable and easier to align thanreflector systems.

Infrared Sensor “Add-On” Kit#400144

To transform ZOT’s Universal Time Delay‘Plus’ into Electronic Triggering, simply addsensors for: Positive machine cycle regard-less of ball weight or speed.

Safety System: The ZOT unit has a built-inSafety system which prevents the machinefrom cycling if the signal is blocked for morethan 2 seconds.

Proven History: The sensors system ZOTdesigned 20-years ago has a track recordlike no other in the industry today.

Infrared Sensor Add-On Kit Spare Parts:Description Part NumberBlue Emitter Block #400001Flat Gray Emitter Cable #450001Gray Receiver Block #400133Sensor Shims #400121Sensor Lens Kit #400032

>

‘A2’ and Jetback Pinsetters

OptionalElectronic Triggering

>


4

Elec

tron

icTr

igge

ring

27


Features & Benefits

Simple Installation: The Expander Card justplugs into the ZOT Universal Time Delay‘Plus’ Module.

Separate and Adjustable Timing: Both out-puts are timed separately, and both areadjustable.

Note: This kit is required if you have AMFAccuScore or AccuScore Plus in combinationwith #400144 kit.

Spare Parts:

#431047 PC Board

#440034 Wire Harness(extending to gearbox)

#440045 Wire Harness(extending to rake latch)

OptionalExpander Card#400147

The ZOT Expander Card provides the 32-Volt DC outputs which enable you to use:ZOT’s Electronic Rake Trip Assembly.

‘A2’ and Jetback PinsettersUniversal Time Delay ‘Plus’ Module

32-Volt DC Outlets

Infrared Sensor Add-On Kit Spare Parts:Description Part NumberSolenoid #400024Internal Lock Washer 1” #740106Hex Jam Nut 1” #730148New Style Sol. Plunger #520090Casting #650001New Style Trip Arm #620107New Style Spring Pin #7000267/32 X 3/4”Flat Head Allen Screw #71024410-24 X 1 1/4” Cam Follower Bearing #810002Standoff #520074Torsion Spring #850015Solenoid Angle Bracket #620062Bushing #520088Steel Spacer #420185

Features & Benefits

Ideal With Automatic Scoring: TheZOT Electronic Rake Trip Assemblyis a great system to use with auto-matic scoring, which eliminatesscoring miscounts. The rake isalways down when scoring sys-tems are trying to read the pins.

Reduce Dead Wood: Instantaneousrake drop will stop pins fromrolling out from the pindeck, ontothe lane surface - eliminating theneed to retrieve pins.

Note: Solenoid requires 32-Volt DCOutput to operate.

Optional

Electronic Rake Trip Assembly#420164

ZOT’s Electronic Rake Trip Assembly will always give a positive Rake Drop,regardless of whether the ball makes contact with the cushion.

Great Rake Trip System for Use with Automatic Scoring

>

>

Optional Add-On#400214Rake Trip Solenoid Lock-Out

(continued)

4


28


Straight ‘A’ Pinsetters and ZOT ConversionUniversal Time Delay ‘Plus’ Module with Electronic Triggering#400037

ZOT’s Universal Time Delay ‘Plus’ Moduleeasily converts a Model ‘A’s’ old cycle relayto a Solid-State system, which provides theability to add components that enable aModel ‘A’ machine to perform like an ‘A2’.

Note: For Time Delay ‘Plus’ without sensors:

Order #400145

Features & Benefits

Electronic Triggering: The ZOT unit will cyclethe pinsetter regardless of the weight of thebowling ball or how slow the ball is thrown,not relying on cushion impact.

Adjustable Time Delay: Delay can be setfrom 3/4 of a second to 8 seconds. Thismakes the oil dash pot time delay obsolete.

Reset Button Lockout: Reading the RakeDown switch and preventing hanging 180’s.

Diagnostic Indicators: LED’s show clearly:power to module, when output to solenoidis occurring, rake down, and 2nd ball.

Equipment Upgrades = Increased Profits:Improving on your machines performancewith positive machine cycling makes thegame more enjoyable for your bowlers -which creates an opportunity to acceptablyincrease prices.

Proven Reliability: ZOT’s unit has been firstchoice for over 2,500 installation, provingits superior performance.

All Module Design: Troubleshooting is sim-ple: all components plug into the ZOT PCBoard independently, making componentexchanges fast and easy.

Time Delay Plus Spare Parts:Description Part NumberPC Board #431046Blue Emitter Block #400001Flat Gray Emitter Cable #450001Gray Receiver Block #400133Sensor Shims #400121Sensor Lens Kit #400032Mercury Switch #400022

>


4

Elec

tron

icTr

igge

ring

29


Straight ‘A’ Pinsetters and ZOT ConversionUniversal Time Delay ‘Plus’ Module with Electronic Triggering

Electronic Gearbox Trip#420001

ZOT’s Electronic Gearbox Trip Assembly is amore reliable way to cycle your ‘A’ pinsetters.

Features & Benefits

More Reliable: Unlike the original solenoid,which only tripped in the 10th frame, theZOT Electronic Gearbox Trip is designed tocycle with every ball, which significantlyimproves performance and reliability.

Extended Solenoid Life: Combining ZOT’sGearbox Trip Assembly with Triggering elim-inates the original solenoid from having tocycle the pinsetter.

Note: Solenoid requires 32-Volt DC Outputto operate.

Electronic Gearbox Trip Spare Parts:Description Part NumberSolenoid #400024Cycle Rod Plunger #520001Angle Bracket (solenoid) #620001Male Uniball #810001Bronze Flange Bushing #810003

Expander Card#400147

The ZOT Expander Card provides the 32-VoltDC outputs which enable you to use: ZOT’sGearbox Trip Assembly and Electronic FastDrop Rake.

Spare Parts:

#431047 PC Board

Features & Benefits

Simple Installation: The Expander Card justplugs into the ZOT Universal Time Delay‘Plus’ Module.

Separate and Adjustable Timing: Both out-puts are timed separately, and both areadjustable.

Note: This kit is required if you have AMFAccuScore or AccuScore Plus in combinationwith #400037 kit.

Electronic Fast Drop Rake #420159

The Electronic Fast Drop Rake makes an ‘A’ Pinsetter operatelike an ‘A2’.

Features & Benefits

Fast Ball Return: Fast Ball Return, without changing the cushionsystem: instantaneous rake drop will elevate the cushion soon-er, for a ball return that’s 4-seconds faster. (12 to 15 minutesper league) saving power cost and reducing wear and tear onmachines.

Reduce Dead Wood: Instantaneous rake drop will stop pinsfrom rolling out from the pindeck, onto the lane surface - eliminating the need to retrieve pins. Note: Solenoid requires 32-Volt DC Output to operate #400147.

Optional

>>

Optional

(continued)

31

31

34

34

34

3235

35

35

ZOT Deck ShieldRepair Kit#420038

New Deck Shield#620154

32

35

37

Gearbox and Deck AssemblyIndex

5

Gearbox

& D

eckAssem

bly

30

Cam Follower Shaft Support BracketFor ‘A2’, Jetback and Straight ‘A’

Pinsetters

# 420502Prevents Crisis Breakdowns: InstallingZOT’s Cam Follower Shaft SupportBracket “Today” prevents interruptions(breakdowns) during peak/league times“Tomorrow”.

ZOT’s Cam Follower Shaft Support BracketSecures the Moving Deck Cam Follower formonths after the Cap Screw (“B” Bolt) has bro-ken: thereby preventing “Crisis Breakdown” atthe least opportune time.

Prevents Damage to expensive 1 to 1 plates(part # 12-100207-000).

Prolongs the Life of the Cap ScrewFlexible Maintenance Schedule repairs can bescheduled when time permits, and not duringpeak bowling times.

*** Every Brunswick Pinsetter Should Have One ***

NEW Support Bracket1 to1 Plate Detector Plate

“B” Bolt

Gearbox Housing

Shaft

Moving DeckCam Follower

5

Gea

rbox

& D

eck

Asse

mbl

y

31

Gearbox and Deck Assembly

Deck Right Deck SaverFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420084

Scissor Spring Pivot Repair KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420285Features and BenefitsNo Welding Required: Simply drill and bolt on the ZOT ScissorSpring Pivot Repair Kit for an easy and permanent repair.

Labor and Time Saving: A much faster repair than removing thestationary deck for rework. The ZOT Repair Kit installs in minutes.

Prevent Crisis Breakdowns: Why wait? If your decks are worn atthe scissor spring eyelet, install ZOT’s repair kit – today; andprevent league interruptions – tomorrow!


Reduce Respots of 5-8-9 Pins: If the pinset-ter often sweeps off the 5, 8 or 9 pins,instead of resetting them for the secondball, the deck is probably crowned. Astraight edge will soon confirm this (seeillustration). The ZOT Deck Right Deck Saverwill permanently eliminate the crown, restor-ing your deck to maximum efficiency.

Minimizes Deck Shift Problems: If the deckdoes not shift freely (the tell-tale signs arerub marks, made by the pulley, on the insideof the Geneva Plates), the ZOT Deck RightDeck Saver offers a simple and permanentsolution.

No More Need for CostlyReplacement…Removal -or- Welding ofDecks: And shimming deck pads to makethem thicker will eventually crack them.

Permanent Repair

Use straight edge to check for crown on deck.

5

Gearbox

& D

eckAssem

bly

32


Replacement Deck ShieldFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#620154


If Your Deck-Shields Are Beyond Repair:Why not replace them and upgrade theimage of your center in the process.

Standard Gray: Direct replacement deck-shield’s are of the finest quality available.

And, For An Added Touch of ImageEnhancement: Have a local silk screeneradd your center name or logo to the newdeck-shield before you install.

Deck Shield Repair KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420038


Big Cost Savings: The ZOT Deck Shield Repair Kit effectively renewsworn mounting slots on your existing shield: A far less expensiveoption than replacing the whole shield.

Installs in Less Than 15 Minutes: ZOT’s Deck Shield RepairKit is simple to install and will secure your deck shield –without having to remove it from the Pinsetter.

GreatPrice

Note: The Complete Kit includes all mounting hardware.

5

Gea

rbox

& D

eck

Asse

mbl

y

33



Eliminates Rake LinkReplacement: Never again willyou need to replace a bent rakelink. ZOT’s unique Spring-Loaded Collapsible Rake Linkreturns to full-length – automat-ically; should the rake beimpacted by a ball, or dropbehind the deck.

Extended Life: ZOT’s ShockAbsorbing design extends thelife of the rake shaft weldmet,the 4 to 1 crankshaft, the key;and other related parts.

Prevents Crisis Breakdowns:The ZOT Collapsible Rake Link isdesigned and built for no downtime.

A ZOT Original Product: That’soften imitated by other manu-facturers, but never surpassed!

40'' (1.016M) Tapered End Rod

#420008

Collapsible Rake LinkFor ‘A2’, Jetback and Straight ‘A’ Pinsetters Lowest Price inthe Industry!

Starter Bellcrank StudFor Straight ‘A’ Pinsetters

#420014


Eliminates Next to Impossible Drilling: PivotStud broken or loose inside the gearboxhousing? No problem! With the ZOT StarterBellcrank Stud you simply leave the brokenstud inside and re-support the pivot studfrom the housing to the 4 to 1 flange; andeliminating almost impossible repair bydrilling the gearbox housing.

Proper Pivot Positioning Automatically:With the ZOT Starter Bellcrank Stud there isno misalignment to damage trigger sensitivity.

Permanent Repair: Restores to like newworking condition.

ImprovedFeature

Resupport Pivot Stud

40-7/8'' (1.038M) Straight End Rod

#420009

5

Gearbox

& D

eckAssem

bly

34


Gearbox Clutch Bearing Assembly KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420048


Reduced Maintenance: ZOT’s RollerBearings are permanently lubricated forextended life and reduced maintenance.

Compatible: Buy the complete kit, or anyof the three component parts separately.The bushing, bearing and retainer discare all interchangeable with the originalmanufacturers parts.

Extended Life: The ZOT improved designfeatures a 4-hole, high tensile strengthBronze, bushing which substantially min-imizes wear and permits re-positioning ofthe dowel pin – up to 4-times – forextended life.

Clutch Yoke Screw ConversionFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420034


Big Time Saver: The ZOT Clutch YokeScrew Conversion will save you upwardsof 28-minutes anytime you have toaccess the clutch spline or rotor disc.The original screw alone takes about 15

minutes to reinstall because of the longthreads and difficulty in accessing andpositioning the pivot pin.

Installs in One Minute: The unique ZOTBreak-a-Way, quarter turn release,screw design installs or removes injust 1-minute; and its clutch lever sup-port spring holds the clutch lever up –automatically.

Reduces Wear and Tear: Eliminatesexcessive clutch face wear and vibration.

Easier Preventive Maintenance: Reducesthe number of clutch adjustments andeliminates the tedious task of realigningthe yoke screw and pivot pin whenreassembling. Easy access for lubrica-tion which extends life, preventing costlyreplacement of clutch drive disc andrelated parts.

Only Available From ZOT: No other origi-nal manufacturer or supplier offers thisunique and easy solution.

#420048

#520029

#810023

#520030

Lowest Price inthe Industry!

5

Gea

rbox

& D

eck

Asse

mbl

y

35


Gea

rbox

&

Dec

kAs

sem

bly

Features & Benefits

Prevent Crisis Breakdowns: Install theZOT Deck Lift Shaft Repair Kit before acrisis breakdown happens during leagueplay.

Time Saving – No Welding: The ZOTRepair Kit’s easy drill and bolt-on appli-cation installs in just minutes; and with-out welding.

Big Cost Savings: The ZOT Repair Kitrenews your deck lift shaft at only a frac-tion of the cost of replacing the originalequipment.

Only Available From ZOT: No other sup-plier, or original manufacturer, offersthis time saving, low cost, permanentrepair solution.

Deck Lift Shaft Repair KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420037

Modified Interlock LinkFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420283

Features & Benefits

Replaces Worn Pivot Eyelet: If the releasespring on the turret support frame is wornout, the ZOT Spring Eyelet Repair Kit offers asimple solution.

Installs Easily In Minutes: And with NOdrilling through the turret frame; whichweakens it further: And NO disassembly.

Eliminates Welding: No need to remove theframe or re-weld.

Adjustable Spring Tension: The ZOT SpringEyelet Repair Kit’s unique design allows forgreater adjustment and re-adjustment of therelease spring tension.

Spring Eyelet Repair Kit (Turret Release)

For ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420178

Features & Benefits

Modified Design Solution: ZOT’s InterlockLink is longer from center to center than theoriginal (see illustration). Once installed onyour pinsetters it repositions the InterlockProbe and prevents jams.

Prevents 5-Pin Chute Pin Jams: Years of usebends the pin release lever making it moredifficult to trip, or activate, turret indexing.

Note: You will need to order two ZOT Linksper machine. The ZOT Modified InterlockLink cannot be used in conjunction with anoriginal.

Longer

Is your springeyelet wornout?

5

Gearbox

& D

eckAssem

bly

36


#420189

Features & Benefits

Permanent Replacement: Of endless andspliced V-belts.

Eliminates the Need: To stock extensive lineof replacement belts.

Easy Installation:Without dismantlingpinsetter drives.

Extended Life: Oil andChemical resistantcompositepolyurethane/polyesterconstruction.

Link BeltFor Brunswick Pinsetters

#420189 1/2'' Link Belt

#420190 5/8'' Link Belt

Tired of having to stock dozens of V-belts indozens of different lengths…only to findyou’re missing the one you need, when youneed it most? Purchases both sizes (1/2'' &5/8'') of ZOT Link Belts and you’ll no longerneed to worry whether you have the rightcombinations of matching belt lengths ininventory (e.g., for motor to gear box, eleva-tor and turret drive, etc.). ZOT’s Link Beltcomes in 20-foot lengths per box, and, witha simple twist of the wrist, you’ll have a beltthat’s a perfect fit for your needs: Checkthese features:

1/2''

5/8''

#420190

Suitable for:All 7 Motor to Gearbox Belts (1/2")All 4 Motor to Elevator Belts (1/2")Long Turret Drive Belts (1/2")Pit Conveyor Drive Belt (1/2")Short Turret Drive Belt (1/2")Cross Conveyor 'V' Drive Belt (1/2")Jack Shaft Drive Belt (1/2")

Suitable for:Endless Ball Wheel Belt (5/8")Spliced Ball Wheel Belt (5/8")Pin Wheel Belt (5/8")

Rubber Scissor Gripper PadFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#820021

Features & Benefits

Neoprene Rubber: Oil-resistant material charac-teristics. Install by sliding onto scissor arm.

Snap-on Urethane Scissor Gripper PadFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420470

Features & Benefits

Urethane: Soft non-marking oil resistantmaterial extends service life.

Snap-On: Easy to install even when thescissor arm is in place on the pinsetter.

Nylon Tie Wraps: Secure the pad to thescissor arm with the nylon tie-wrap and theZOT pad stays in place.

Easy to Install: Saves time … Saves money.

5

Gea

rbox

& D

eck

Asse

mbl

y

37


Urethane Deck ChutesFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

“Three Styles to Fit all Ten Positions”

Features & Benefits

Lowest Coefficient of Friction: ZOT’s speciallyformulated urethane reduces frictionbetween pins and chute and prevents pinsfrom sticking.

Heavy Duty Reinforced Rib: Increasing thethickness of the material (urethane) at thestress points where chutes typically breakprematurely extends the life of the ZOTproduct.

Chute Identification: All chutes are clearlymarked for easy selection.

Larger Inside Skirt Diameter: Ensures fewerpin jams.

Pin Positioning Etched on Combo: Anembossed number alongside each mountinghole clearly identifies which hole should beused for a specific pin position on theCombo.

Universal 7, 10 & 1 -Pin Chute: Reduceinventory by using ZOT’s 7-10 pin chutewhich is easily modified for use in the 1-pinposition.

Features & Benefits

Rigid and Durable: The charac-teristics of the material reducespin-bounce that causes deck orturret jams typical of harder urethane rollers.

Urethane: Will not mark pinsand is oil resistant for longer life.

Self Lubricating Hub: Graphitefilled hexagon insert ensuresthat the hub spins on the pin.

PositioningIdentification

Reinforced Rib

#680002 Combo

#680003 For 7-10 pin and modification for 1-pin

#680004 for 5-pinLarger Inside Diameter

Cut Line 1-pin Position

Graphite Filled Hub

Urethane Deck RollerFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#680010

Newly Modified 5-Pin Chute

Widest Diameter Pin Opening available in the industry.

Steeper Angle to Horizontal Pin Resting Position –ensuring the pin sits more upright in the chute.

Increased Radius or Contour for easier pin transitionfrom horizontal to vertical.Newly Modified Hub

5

Gearbox

& D

eckAssem

bly

38


• Sold in packages of ten• Soft; open-cell foam: Prevents neck checking and head scalping of pins and reduces bending and cracking of

expensive aluminum deck castings.• Threaded mounting studs: For easy installation – simply insert the deck-pad into the holes and secure with nuts.• Universal: Purchase a Deck Pad Drill Template (ZOT #620083 – below) and modify your old style decks faster than

you can remove old leftover glue residue.

Standard Urethane Deck Pad#420294

“Twice the Life”

Urethane Deck PadsFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

Only ZOT offers a choice between standard and long-life Deck Pads

ThreadedMounting Studs

Dura-Life Deck Pad#420297

“Lasts 3-Times Longer”

Standard Deck PadAccelerated test results proved that ZOT’s Standard Deck Pad will lasttwice as long as the original manufacturer’s product – and they’remuch easier to install.

Dura-Life Deck PadZOT’s Dura-Life Deck Pad features a rugged outer skin for greater durabil-ity. Accelerated controlled testing revealed that the average life-cycle ofthis great new chemically engineered polymer product from ZOT, is“three times longer” compared to the original manufacturer’s product.

ZOT’s Dura-Life Deck Pads not only last 3-times longer, they’re easier to install.

Cross-section showing ruggedouter skin

Deck Pad Drill Template#620083

Features & Benefits

Easy to Use: Put an end to messy glue on the deck pads.Convert your older style deck to use current bolt-on typedeck pads.

Save Time: It’s faster to modify your aluminum deck thanto clean and glue new deck pads in place.

GreatPrice

6

Elev

ator

Asse

mbl

y

39

Elevator AssemblyIndex

43

4042

45

45

44

4144

41

44

40

40

6

ElevatorAssem

bly

40

Elevator Assembly

Ball Lift Rod Spring Conversion KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420036


Fully and Easily Adjustable: The ZOT Spring Conversion features a stronger andfully adjustable tension spring that can be fine tuned, and without disassembly.

Easy to Install: A simple bolt-on installation.

Prevents Jams and Ball Calls: ZOT’s Ball Lift Rod Spring Conversion Kit preventsjams caused by the ‘Yoyo’ effect of balls spinning halfway up the riser rod; sav-ing countless ball calls.

Features & Benefits

Eliminates Pin Carry Into the Ball Track: ZOT’sadjustable Ball Lift Rod Clamp flips pins backinto the pit before they reach the midway pointof the riser rods, thereby preventing pins fromcarrying up into the ball track.

Restores Ball Lift Performance: Once installedon the riser rods, ZOT’s Adjustable Ball Lift RodClamp adjusts the pressure on the ball to equal,or exceed, the pressure at the top of the rods,ensuring a positive lift.

Easy to Install: The ZOT Adjustable Ball LiftClamp simply clamps permanently in place – afar superior alternative to non-adjustable strap-ping devices and: it’s “Goodbye” to Ball WheelGlue-on-Strips, which wear out quickly, or falloff as the glue fails.

Fully Adjustable: Once in position, this perma-nent positive ball lift solution easily adjusts tomaintain the required pressure, and compen-sate for wear and tear in other related parts andassemblies. Narrower adjustment of the liftrods yields more positive pressure from the ballto ball wheel.

Only Available From ZOT: No other manufactur-er or supplier offers this problem solvingsolution.

Adjustable Ball Lift Rod ClampFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420050

Prevents Pin Carry

Lift rods spreadyields less tension

Narrow lift rods yields more tensionPrevents ‘Yo-Yo’ Effect

Prevents ‘Yo-Yo’ Effect

Ball Lift Rod Spring Conversion Kit Spare Parts:

Description Part NumberA.Arbor Stem #520023B.Threaded Stem #520024C.Retainer Spring Nut #520025D.Compression Spring #850006

D

AB

C

6

Elev

ator

Asse

mbl

y

41

Elevator Assembly

Tiger Grip StripsFor All Brunswick Ball Wheels

#420403


Stop Ball Wheel Lift ProblemsPositive Smooth Ball Lift: Regardless ofball composition, or type of lane dressing.

Durable: Soft rubber material has provenLong-Lasting reliability. The Neopreneblended Rubber composition withstandsoil and dirt, and will not break down orharden with age.

Excess Oil Management: The Ball ContactSurface is textured with a series of raiseddots, in varying diameters and heights,which sheds any excess oil to recessedareas, much like treads on a tire, forincreased ball surface contact and traction.

Easy Installation: The ZOT Tiger Grip Strip’sSelf-Adhesive backing provides a quick-and-easy installation.

Ball Lift Rod Stud Modification KitFor ‘A2’ and Jetback Pinsetters

#420205


Reduced Ball and Pin Damage: ZOT’s Ball Lift Rod Stud ModificationKit prevents pins from getting trapped between the ball and lift rodstud, enabling pins to fall back into the pit area freely.

Decreased Retrieval of Pins From Subway: ZOT’s Stud Modificationsignificantly reduces pin carry up the ball lift rods, which oftenresults in having to retrieve pins from the subway.

Adjustable Spring Tension: The Modification features a strong, fullyadjustable, tension spring that can be fine tuned, withoutdisassembly.

Pin and balljamming at lift rods

Clearance permits pinto drop into pit

#520095

#520096

#520094#520093

#850017

6

ElevatorAssem

bly

42

Elevator Assembly

Power Ball Spin Eliminator KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420179


Eliminates Ball Calls: ZOT’s Power-Driven Ball Spin Eliminatorstops all trouble calls caused by balls spinning in the pit area,resulting in smoother running leagues that finish earlier; andhappier bowlers.

Positive ‘Powered’ Ball Return: ZOT’s Power Ball Spin Eliminatoris belt driven by the cross conveyor drive system. A rotating pad-dle gently, but positively, steers the spinning ball to the threecritical contact points on the riser rods that begin the elevatorprocess.

Installs In Minutes: This permanent solution installs, with asimple drill and bolt, in just minutes…and the belt tensionadjusts easily.

Replacement Paddle #420324

Newly Designed Paddle

Break Resistant, Reinforced Webbing

Rubber Pulley Protector #420394

Link Belt #620156

Improved

Only Available From ZOT: Other manufacturers and suppliers onlyoffer non-powered solutions to the ball spin problem… and withvery limited results. ZOT’s Power-Driven Ball Spin Eliminator is theonly one that offers positive and reliable results.

ZOT Spinning Ball Eliminator#420004


Prevents Ball Calls: Caused by balls spinning in the pit area with ZOT’sBall Spin Eliminator for smoother, faster running leagues, open play,and happier customers.

NO DRIVING MECHANISM REQUIRED!

Arm Includes Cover for Better Grip: ZOT’s specially formulated Coverensures positive contact with spinning balls, regardless of ball compo-sition or type of lane dressing.

Easy Installation: Simply drill two holes and bolt in place.

GreatPrice

6

Elev

ator

Asse

mbl

y

43

Elevator Assembly

Return Track Mounting Bridge KitFor Straight ‘A’, Mini Jetback and ZOT I Conversions

#420031


No More League Interruptions: Caused byrear frame ball track support arm failure.

Installs in 30-Minutes: There’s far less downtime with ZOT’s Return Track MountingBridge Kit than with any alternative repairoption, therefore it’s less costly.

And; it’s drill-and-bolt installation eliminateshazardous, on-machine, welding.

Permanent Repair: That’s 10-times strongerthan the original equipment. ZOT’s BridgeSupport absorbs all downward pressureand impact.

Easy To Maintain: The kit includes a replace-able, oil impregnated, bronze bushing that’sfar superior to the original steel bushing.

Only Available From ZOT: Have one on handat all times – it’s such a quick and simplesolution to a major problem.

New LowerSupport

BrokenGuardBracket

Wheel Guard Bracket Repair KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420086 (7-Pin Side)

#420087 (10-Pin Side)

Pin Retainer KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420180Features andBenefits

Reduce 180° Stops:ZOT’s Spring Loaded– extended flexiblewiper surface – PinRetainer Kit preventspins from slippingout of the pin sock-ets because of wornor missing pin wheelbuttons.

Simple andPermanentInstallation: The kitssimple drill-and-boltinstallation is far eas-ier than alternativeand hazardous weld-ing and grinding –and it’s permanent.

Features and BenefitsReduced Pin Damage: ZOT’s WheelGuard Bracket Repair Kit prevents pindamage caused by the heads andnecks getting trapped between theshaker board and pin wheel.

No Welding: This easy to install, drilland bolt-on, kit resupports the lower

wheel guard bracket without haz-ardous repair operations.

Permanent Repair: That’s muchstronger than the original equipment.

Only Available From ZOT: No othermanufacturer or supplier offers thisproblem solving solution.

Spring Loaded: Flexible wiper surface

#620014

#520017

#810024

Does YourRear Frame LookLike This?

6

ElevatorAssem

bly

44

Elevator Assembly

Features & Benefits

Stop Ball Damage: The ZOT solution: Addinga Fourth Ball Guide Rail at the point where theball sometimes leaves the upper track rail andcontacts the cross conveyor pulley – resultingin ball damage and unhappy bowlers.

Minimize ‘Y’ Switch Jams: ZOT’s Fourth Railkeeps light weight balls on the original track,forcing them to stop at the ball preferencesystem.

Reduce Ball Calls: The Fourth Rail system pre-vents light weight balls from rolling off the toprail and falling into the pit, which result in ballcalls and, potentially, even more dam-aged balls.

Fourth Rail Ball GuideFor ‘A2’ and Jetback Pinsetters

#420203

On Even Numbered Lanes Rear Ball Tracks

For Straight ‘A’, Mini Jetback andZOT Conversions

#420331(Even Lane Rear BallTracks)

#420332 (Odd Lane Rear BallTracks)

Fourth Rail

Ball Damage DeflectorFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420204

On Odd Numbered Lanes Rear Ball Tracks

Features & Benefits

Stops Ball Damage: The ZOT Ball Deflector bumper pad reduces dam-age to bowling balls that leave the track and make contact with thecross conveyor pulley assembly.

Simple Design: A Vinyl capped steel bushing secures the bumper pad.

Shaker Pulley Arm Pivot Repair KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420329Features & Benefits

No More League Interruptions: Caused by rear frame shaker armsupport bracket failure. Inspect for cracked brackets, and preventmajor machine breakdown, by installing a ZOT Repair Kit before thefailure occurs.

No Welding: This ZOT exclusive, easy to install, drill and bolt on, kitresupports the shaker pulley arm pivot bracket, without hazardouswelding repair operations.

6

Elev

ator

Asse

mbl

y

45

Elevator Assembly

Universal Urethane Wheel GuardFor Straight ‘A’, Jetback and ‘A2’ Pinsetters

#420305

Keeps pins away from moving belts and elevator wheel; to prevent costly pin damage.

• Durable half-inch Urethane wheel guard that does not mark balls or pins.

• Designed to mount on either the right or left side of the elevator.

• Mounting holes are square to fit the head of carriage bolt mounting hardware.

• All mounting hardware is included.

Direct Replacement: For original A2 Rear Elevator Panel.Also compatible with Jetback and Straight ‘A’ machines.

Stop Welding: ZOT’s replacement Rear Elevator Panel is afar better alternative to repetitive patching and welding –in fact many rear panels are beyond welding and are nolonger fully functional.

Rear Elevator Panel#420485

GreatPrice

Gum Rubber Lift Rod Cover

#420503 — 50 foot roll

#420504 — 90 inch cover

Replace worn and damaged Lift Rod Covers withZOT’s All-Natural Tan Gum Rubber Covers to restoreoptimum performance and reliability to your ball liftsand returns.

ZOT’s Gum Rubber Lift Rod Covers are manufacturedto the same specifications and surface texture as theOriginal Equipment Manufacturers (OEM) product.

A

BK

C

DE

F

G

H

I

49

50

51

Greasable 'X' Washer Pin (At Rake Arm)

#420316

48Counter Balance Pivot Wheel Kit

#420062For 'A2', Jetback and Straight 'A' Pinsetters

For 'A2', Jetback and Straight 'A' Pinsetters

I

B

M

H

Rod Endfor ‘A2’ & Jetback

Link Platefor ‘A2’ & Jetback

50

G

L

For 'A2', Jetbackand Straight 'A'

Pinsetters

Rake Lift Arm Bumper Kit#420016

#620037

#420321

Rod End Trigger Tubes

#640010

#640011

ZOT’s Link Plates are a direct replacement for the Original Equipment Manufacturers (OEM) product.

ZOT’s one-piece greasable Rod End’s are a better alternative to the old style of bushings, spacers and washers, and will help improve pinsetter triggering.

Rake Shaft Assembly - Index

7

Rake S

haftAssem

bly

46

ZOT # Description Brunswick # ZOT # Description Brunswick #A. 420041 Rake Latch Assembly 12-252301-000 H. 420316 X Washer Pin (Greasable Kit) 12-250010-007B. 640011 Tube 46 5/8” 12-252364-003 I. 420321 Rod End (‘A2’ & Jetback) 12-252365-000E. 420013 Rake Spring (Straight ‘A’ Style) 12-250051-000 J. 850007 Rake Spring (‘A2’ Style HD) 12-250051-000F. 520040 Spring Wheel 10-376009-000 K. 420478 Tension Kit N/A

520038 Spacer 12-250197-000 L. 620037 Link Plate N/AG. 420016 Rake Lift Arm Bumper Kit 12-252092-000 M. 420062 Counter Ballance Pivot Wheel Kit N/A

#640011 46 5/8”

#640010 35 3/8”

Hex shaped steel tips provide wrench hold-ing capabilities and eliminates deformedends resulting from nut jamming

GreatPrice

7

Rak

e S

haft

Asse

mbl

y

47

Rake Shaft Assembly

Heavy Duty Counter Balance SpringsSpeeds up rate of Rake Descent

Fewer Scoring Miscounts: Faster or SharperRake Drop rate. Provides more time for thecameras to read pins

Less Dead Wood

For Straight ‘A’ and ZOT Conversions

#4200139% Higher Pro-Load than originalStraight ‘A’ Spring

Brunswick no longer builds the Original‘A’ Spring. Brunswick’s A2 Spring has22% less tension:

A2 Cushion = 70lbs

‘A’ Cushion = 90lbs

Correct Spring Tension is Critical wheninstalling any Fast Drop Rake System onStraight ‘A’ Pinsetters

ZOT’s Redeveloped Heavy Duty Springs include the following:

Swivel Hook that reduces lateral stress on the hook, thereby reducing the incidence of hook breakage

Larger Diameter Spring Steel is used on the Swivel Hook, as compared to the original stationary hook

Premium Grade Spring Steel is used in the construction of the body of the Spring … a far superior grade of steel than the originalstationary spring product.

For A2 and Jetback Pinsetters

#85000728% Higher Preload than Brunswickbranded A2 Spring

Saves Time for Mechanics: ZOT’s moredependable and sharper rate of rakedescent reduces valuable time spentmaking difficult camera adjustments.

Eliminates rake Creep Down

Adjustable Counter Balance Spring Tension Kit

#420478 7 & 10-pin side

The Tension Kit connects to the lower end of the Counter Balance Spring making iteasy to create the optimal rate of Rake descent by adjusting the overall length ofthe spring. Longer yields more tension, shorter yields less.

Redesigned& Improved

360º Rotation

7

Rake S

haftAssem

bly

48

Rake Shaft Assembly


Big Savings: ZOT’s Rake Tube Conversionconverts the original rake shaft assembly toa 3-piece module; and at a fraction of thecost of replacing the complete assembly.Each side of the ZOT Conversion costs abouta third of the cost of a complete replace-ment rake shaft assembly.

Stronger Design: ZOT’s Rake TubeConversion features added Steel reinforcingat the common rake tube breakage points,ensuring longer life.

Save Your Good Parts: Rake CrossoverTubes are rarely damaged, so why replacethem just because the sides are broken?With ZOT’s Conversion you only need toreplace the side that is damaged.

Save Time: It’s faster to replace two sideswith the ZOT Conversion, than to replace theentire rake assembly – which is rarelynecessary.

Note: Only Available From ZOT.

#420068 (7-Pin Side)

#420069 (10-Pin Side)

For Pinsetters with Serial Numbers24,000 and Over, Order: (Gray painted machines)

#420082 (7-Pin Side)

#420083 (10-Pin Side)

For Pinsetters with Serial Numbers24,000 and Under, Order: (Green painted machines)

Note: ZOT Counter Balance Pivot Wheel Kit#420062 is necessary for all pinsetters withserial numbers below 24,000 when replac-ing the rake assembly.

Rake Lift Arm Lever Repair KitsFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

“V” Lever Repair

#420071

Rake Tube ConversionFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

Cut HereAddedmetal farbeyond theend of therake stop

“C” Lever Repair

#420090


Cover Elongated Rabbit Ear Holes: Prevents triggering failure, improperrake drop and automatic scoring miscounts.

Shock Mount Pivot Repair

#420310

7

Rak

e S

haft

Asse

mbl

y

49

Rake Shaft Assembly


Back to Work in Just Five Minutes: That’s allit takes to get a broken rake arm fully oper-ational with ZOT’s Rake Arm Repair Kit – awelcome benefit during league play. It’swedging action provides a strong repair,requiring only a 7/16” open end wrench toinstall.

Becomes Permanent: At a more convenienttime the quick repair can be made morepermanent by drilling two holes andinstalling two bolts (included in the kit).

Compatible: The ZOT kit fits both Americanand Japanese made Brunswick machines.

Most Durable: The ZOT kit is engineered inhigh tensile strength Bronze, making itsdesign 2-times stronger and more durablethan competitive aluminum products.

Only Available From ZOT: Be prepared forthat ‘crisis’ breakdown – order one today.

Rake Return Pivot Repair KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420181


Big Cost Savings: Repairs the Rake-to-Spring tube pivot point at a fraction ofthe cost of a replacement rake assem-bly; and prevents severe damage to therake tube cylinder and rake assembly.

No Welding Required: Installation ofZOT’s Return Pivot repair requires nomore than a simple cold saw, and abolt-on application.

Time Saving: It’s much faster to installZOT’s permanent repair kit, than toweld, or replace, the complete assembly.

Easy to Maintain: The speciallydesigned pin features a Grease Zerk,which yields positive lubrication to allthree new bronze bushings.

Pin Only: Zerk Type Pin#420274

New GreaseZerk Design

Heavier Steel

Grease Zerk

Rake Arm Repair KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420033

Every mechanic

needs one as an

emergency repair kit

Rectangular Tubing is 40% Stronger thanthe Original Round Tubing

7

Rake S

haftAssem

bly

50

Rake Shaft Assembly

Three-Piece Modular Rake Shaft AssemblyFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420150


Eliminates Welding: The ZOT Three-Piece Modular Rake ShaftAssembly features added Steel reinforcing at the commonrake tube breakage points, ensuring two to three timeslonger life; and eliminating welding and lengthy leagueinterruptions.

Lasts Longer – Saves Money: The ZOT Three-Piece Assemblyis so much stronger than all the others that the benefits ofquick and easy installation becomes secondary.

Additional Savings: If one side of your 3-piece assemblyshould ever break, you can simply replace the broken part –without having to replace the entire assembly. It’s faster,easier, and 50% less expensive.

Easy to Ship – Easy to Store: Our Three-Piece Assemblypacks easily into a ‘small’ carton, for big savings on UPSshipping costs. And a spare assembly can be storedwithout using up an entire room!

Product Painted Black to Eliminate Scoring Miscounts.

Note: ZOT Counter Balance Pivot Wheel Kit #420062 isnecessary for all pinsetters with serial numbers below24,000 when replacing the rake assembly.

Great

Price

Older Model Spare Parts #420032:Description Part NumberRake Tube (7-pin side) #640013Center Tube #640014Rake Tube (10-pin side) #640015

New DesignEasier to assemble

and install

New Style Spare Parts #420150:Description Part NumberRake Arm Weldmet #640147(10-pin side) SquareRake Arm Weldmet #640148(7-pin side) SquareCenter Tube Weldmet #640149

ZOT # Description Brunswick #K 640058 Shaft End Weldmet 12-252331-000L 810044 Spring Seat 12-252327-000M 520074 Spacer 12-100185-020N 520076 Grooved Spacer and Bolt 12-252332-000O 620055 Trip Bracket 12-252334-000P 520071 Spacer 10-386062-000Q 520066 Shaft (Main) 12-252333-000R 850013 Compression Spring (Inner) 12-252329-000S 850012 Compression Spring (Outer) 12-252328-000T 800039 Rake Lowering Shock 12-252338-000U 810039 Nylon Bumper 12-252342-000V 640057 Rod End 12-252338-003W 810005 Grommet 12-250189-000X 520063 Steel Spacer 12-250011-021Y 810040 Bronze Bushing 12-250075-000Z 740100 Steel Fender Washer 12-250076-002

ZOT # Description Brunswick #AA 650025 ZOT Body N/ABB 400024 Solenoid N/ACC 520077 Plunger (Shotgun) N/ADD 640059 Trip Lever N/AEE 520062 7/32” Roller N/AFF 700007 1/8” Roll Pin N/AA 810026 Bearing (Plain Bronze) Main (Bruns.) 11-420098-000A 810041 Bearing (Plain Bronze) Main (ZOT) N/AB 520046 Spacer 12-250011-020C 810027 Bearing (Plain Bronze) 11-420096-000D 810042 Bearing (Plain Bronze) 11-420097-000E 520067 Spacer 12-100185-022F 620054 Roller Bracket 12-252326-000G 520068 Spacer 12-100185-021H 810002 Roller Bearing 11-450303-000I 850014 Spring (extension) 12-252330-000J 810043 Bearing (Plain Bronze) 11-420035-000

7

Rak

e S

haft

Asse

mbl

y

Rake Shaft Assembly

Electronic Fast Drop Rake SystemFor Straight ‘A’ and ZOT Conversion Pinsetters

#420159Features and BenefitsFaster Ball Return: Instantaneous rake dropwill elevate the cushions sooner, for a ballreturn that’s 4-seconds faster. This may notsound like much, but it translates into asaving of 15 to 17 minutes, for a typical 5-person team league!

Reduce Dead Wood: Instantaneous rakedrop will stop pins from rolling out of the pindeck, onto the lane surface – eliminating theneed to retrieve the pin; and score correctionproblems caused by inexperienced bowlers.

Equipment Upgrades = Increased Profits:Improving on your machines performancemakes the game far more enjoyable for yourbowlers – which creates an opportunity toacceptably increase prices, especially if youcombine the upgrade with a good promo-tional program.

Years of Proven Reliability: ZOT’s ElectronicShotgun features State-of-the-Art technolo-gy, and is engineered for years of reliableperformance. ZOT’s unit has been the firstchoice for over 5,000 installations, provingits superior performance.

Electronic Trip Rake Lowering Hardware

Note: Is Your Triggering Compatible: Youmust have electronic triggering for this sys-tem. Check to see whether your triggeringis compatible!

Obviously the Electronic Fast Drop RakeSystem is compatible with ZOT ElectronicTriggering.

Note: For serial numbers below 24,000,#420066 also required.

Only Available From ZOT: No other manufac-turer or supplier offers a ‘true’ Electronic FastDrop Rake System.

Rake Latch Replacement PartsFor Brunswick Original and/or ZOT

A

B

C

D

E

F

G

H

IJ

KL

MN OP

Q R

S

T

U

V

W

X

X

Y

Y

Z

Z

AABB

CC FF

EE

DD

M

ZOT Rake Latch Assembly Only#420154

Brunswick Assembly #420041 ZOT Assembly #420154

51

8

Tool& S

afetyProducts

52

Features & Benefits

Clean Up Turret Jams - Easily: If a mechanic has scram-bled to capture, or reassemble, the 149 bearings in theturret just once, they’re certain to put off doing the jobagain until it’s critical. ZOT’s unique Turret Rebuild Toolputs an end to all that. Now the task can be tackled fear-lessly, since ZOT’s Rebuild Tool has made the job so mucheasier.

Trouble Free Turret: Turret bearings become sticky withdust (including from resurfacing), dirt and heavy greaseaccumulation. Your Turret will run more smoothly andtrouble free after cleaning and reassembly. ZOT’s TurretRebuild Tool just made the job much easier.

Captures All The Bearings: ZOT’s Turret Rebuild Tool cap-tures all 149 bearings as the assembly is dismantled, andit spaces up the bearing and spider ring, for easyreassembly.

Turret Rebuild ToolFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420039

53

53

53

53

52

45

54

Half the Priceof Brunswick

Tools and Safety ProductsIndex

8

Tool

& S

afet

yPr

oduc

ts

53

Tools and Safety Products

1. ZOT Pinsetter Parts, Inc., Warrants Products to be free from defectsin material and workmanship under normal condtions of use and service. The obligation of ZOT Pinsetter Parts, Inc., Under thiswarranty, being limited to making good, at the factory, any partmanufactured by ZOT Pinsetter Parts, Inc., which shall within one (1) year after delivery to the original purchaser be returned to the factory of ZOT Pinsetter Parts, Inc., with transportation charges paid.

2. Except as herein above provided, there is no warrant, express, or implied, and none shall be implied by law, and ZOT Pinsetter Parts, Inc., expressly denies on the part of any person or entity to incur or assume, for ZOT Pinsetter Parts, Inc., any other liability in connection with the sale of any ZOT products.

ZOT Pinsetter Parts, Inc., Warranty

Features & Benefits

Increased Safety In The Workplace: No more hazardous climb-ing up the rear of the pinsetters. ZOT Steel Steps, which featureDiamond Plate Tread, makes access to your pinsetters easierthan its ever been.

Easy To Install: ZOT’s All Steel Steps install easily with a simpledrill and bolt on application.

Does Not Turn The Back End Aisle Space Into An ObstacleCourse: The mounting of the steps, which only project 4''(.101M) or less from the rear of the pinsetters (depending onthe style of kickback), begin at the level of the first riser, leavingthe aisle and floor space free for easy access and cleaning.

Steel StepsFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420311

Features & Benefits

Easier Access To Top Of The Machines:Whether you have ZOT’s steps or not,adding ZOT’s Catwalk Handle to the backof your catwalks makes scaling themachine far safer, specially if you are car-rying tools.

Easy To Install: Simply drill and bolt theZOT Catwalk Handle to the wooden cat-walk, above the elevator wheel.

“If Climbing Onto Your Pinsetter’s Seems Like ClimbingMount Everest…Install ZOT All Steel Steps – Today”

Catwalk HandleFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420312

“Great LowerPrice”

8

Tool& S

afetyProducts

54

Tools and Safety Products

Features & Benefits

Increased Safety In The Workplace: ZOT’s Pop TopElectrical Control Box Cover is specially designed to pro-tect employees from unnecessary exposure to the pinset-ters electronic components.

Easy Access: When access to electrical components isnecessary, it takes but two seconds to release the latches,allowing the cover to swing down instantly…and withoutusing a screwdriver.

Convenient Tool Tray: Once you’ve released the latches,the cover pivots downward and provides a useful surfaceto use as a tool tray. Or, you can simply remove the coverby sliding it to the left.

Accommodates Larger Power Breakers: A knockout panelaccommodates larger power breakers, e.g. Federal Pacificand General Electric.

No longer available from Brunswick

Pop Top Electrical Control Box CoverFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420186 (American Pinsetters)

#420187 (Japanese Pinsetters)

New knockout will accommodate the Slide front cover to left tolarger power breakers remove sliding hinge(Federal Pacific or General Electric)

M

N

Z

AA

BB

DD

O

P

Q

R

U

T

S

E

L

P

DD

N

Z

O

55

9

PitC

ushi

onAs

sem

bly

Pit Cushion AssemblyIndex

Features & Benefits

Improved Triggering: ZOT’s Cushion Arm Rebuilding Kit includes all parts neces-sary to rebuild one cushion arm to better-than-new condition.

Reduced Maintenance: Kit includes pre-grease grooved bushings and SteelCushion Link with built in grease zerk for easy and reduced maintenance.

Cost Savings: Kit includes ZOT “Steel” Follower Links that outlast all others.

Cushion Arm Rebuilding KitFor ‘A2’ and Jetback Pinsetters

#420018 #420063Kit includes: Kit includes:Steel Follower Link casting Aluminum Follower Link casting

ZOT# Description Brunswick#

A. 620093 Curtain Rod Bracket LH 12-252269-000620094 Curtain Rod Bracket RH 12-252268-000

B. 420175 Cushion Mount Bracket 12-252341-000C. 620072 Support Arm (cushion) 12-252073-000D. 800006 Shock Absorber (cushion) 12-252173-000E. 810011 Rod End (uniball) LH THD 12-252060-000F. 640010 Tube (cushion lift 35-3/8”) 12-252364-002G. 420321 Rod End (lift tube) 12-252365-000H. 800017 Pit Cushion (‘A2’ & JB) 12-862578-000I. 810029 Cushion Facing (‘A2’ & JB) 12-252308-000

Strap on Facing OnlyJ. 810012 Grooved Bearing (bronze) 10-424001-000K. 520012 Spacer (cushion mount pivot) 12-100185-036L. 620010 Link (cushion) 12-252069-000M. 520014 Bushing (cushion link) 12-252350-000N. 810013 Plain Bearing (bronze) 11-420094-000O. 810014 Urethane Follower Link Roller 12-252351-000P. 650005 Follower Link (steel casting) 12-252346-000Q. 520010 Spacer (grommet steel 12-250011-002

bushing)R. 520015 X Washer Pin (short) 10-229601-000S. 520016 X Washer Pin (long) 10-229602-000T. 810005 Rubber Bushing (urethane 12-250189-000

grommet)U. 420218 X Washer 1/4”(pkg. 25) 11-230005-001V. 620037 Link Plate (‘A2’ & JB tri) 12-252359-000W. 420223 Washer (fiber _” ID) 12-250076-002X. 520009 Spacer (tri-plate link) 12-250011-003Y. 810007 Bearing (bronze tri-plate) 12-250248-000Z. 520011 Spacer (follower roller) 12-252349-000AA. 520013 Spacer (follower casting) 10-386092-000BB. 740127 Washer 13/32” ID (special 11-190512-000

follower)CC. 640011 Tube 46 5/8” 12-252364-003DD. 710204 Cushion Arm Bolt 12-252325-000EE. 620054 Follower Link(aluminum casting)FF. 710111 Hex Screw 2-20 x 3 1/2GG. 740118 1/2 SAE WasherHH. 710337 Screw 3/8-24 x 2 1/4II. 710156 Hex Screw 3/8-24 x 2 3/4

For ‘A2’ and Jetback Pinsetters

Q

BB

55

56 59

A

B

CD

E

F

G

HI

KLM

NO

P

R

T

UV

W

X

Y

Z

Z

AA

56

58

57

56

CC

J

S

“Mini” Cushion Arm Rebuild Kit

#420509Good Cushion Arm maintenance is essential to ensure a“Smooth Running” cushion operation.

ZOT’s “Mini” Cushion Arm Rebuild Kit offers an affordableoption to restore your Cushion Arm assemblies.

EE

EEBB

FF

GG

HHIIO

J Z

N

K MJ K

56

Pit Cushion Assembly

9

PitCushionAssem

bly

Features & Benefits

Outlasts All Others: ZOT’s precision engi-neered “Steel” Follower Link has nearlythree times the tensile strength of thecheaper aluminum followers favored by theoriginal and other suppliers.

Big Cost Savings: ZOT’s “Steel” FollowerLink could last 5 to 6 times longer than alu-minum. In fact, if used in conjunction withZOT’s Super Follower Link, this may be theLAST Follower Link you ever need to buy.

Improved Triggering: Replacing worn follow-er links will always improve triggering.

Only Available From ZOT: No other manufac-turer or supplier offers an all “Steel”Follower Link!

“Steel” Follower LinkFor ‘A2’ and Jetback Pinsetters

#650005

Note: Kits do not include Tri-Plates whichmust be purchased separately.

Features & Benefits

Improved or Restored Triggering: With ZOT’shardened steel Cushion Link.

Easy Maintenance: ZOT’s Cushion Link fea-tures a Grease Zerk which eliminates havingto dismantle the assembly for preventivemaintenance.

Enhanced Cushion LinkFor ‘A2’ and Jetback Pinsetters

#420067

Features &Benefits

Nuts areStationary:Prevents nutsfrom rotatingor becomingloose throughmachinevibration.

Easy to install:Easy to posi-tion and holdin place. Savesinstallationtime and frustration.

Cushion Link#620010

Direct replacement for original product.

Features & Benefits

Restore to ‘Like New’ Condition: The ZOTreplacement bushings are manufactured tothe precise specifications of the originalbushings.

Extended Life: ZOT Pre ‘Grease-Grooved’Bushings will outlast the originals even withinfrequent or irregular additional lubrication.

Tri-Plate Bushing KitFor ‘A2’ and Jetback Pinsetters

#420017

Curtain Bracket Nut Plate KitFor ‘A2’ and Jetback Pinsetters

#420020

Urethane Follower Link Roller#810014

High impact and wear resistant urethane isused in the manufacture of this bushing forthe ‘A2’ cushion linkage.

Note: Two brackets per kit

Link Plate#620037

ZOT’s Link Plates are a direct replacement forthe Original Equipment Manufacturers (OEM)product

Cushion Mount Bracket#420175

• Solid Steel Construction

• Includes Factory Installed Bronze GrooveBushing

57


9

PitC

ushi

onAs

sem

bly

Features & Benefits

No Drilling: Simply leave the broken bolt inthe metal plate, file it flat; and install thenew ZOT Flat-Head screw and Hold-Downplate.

Versatile: The ZOT Flat-Head screw can beinstalled in any one, or two, of the fourmounting holes in the kickback plate.

Save Time: The ZOT Mount Bolt Repair Kit,for kickback plates, will save you hours.

Always Have a Kit on Hand

Mount Bolt Repair KitFor ‘A2’ and Jetback Pinsetters

#420074

Easy Permanent Repair of Broken Cushion Brackets Bolts

Rubber Pit CurtainFor ‘A2’ and Jetback Pinsetters

#800005

No need toremove

broken bolts

Features & Benefits

Non Reflective Surface: Matte or dull surfacefinish prevents scanner washout preventingscoring miscounts.

American Made: Two-ply, nylon reinforcedrubber belting that’s made in the USA.

Smooth Surface: That’s oil resistant, easy toclean and non marking.

Rugged Construction: Rod loops are bondedwith industrial strength adhesive and rivetedfor added strength.

Bonded & Riveted

BestQuality

BestPrice

58


9

PitCushionAssem

bly

Super Follower LinkFor ‘A2’ and Jetback Pinsetters

#420060Complete Kit (10 Pin Side)

#420064Complete Kit (7 Pin Side)

#420061Base Only (10 Pin Side)

#420065Base Only (7 Pin Side)

Features & Benefits

Reduced Wear and Tear: ZOT’s Unique SuperFollower Link — which is precision engineeredin ‘High Tensile’ steel – features stationary,and recently reinforced, welded and hard-ened studs which prevent the followers fromshifting during every cycle; even when thenuts loosen. It’s this shifting, or ‘Play’ in thefollower link castings that’s the major causeof life-shortening wear and tear on theassemblies rollers and bushings.

Improved Triggering: Installing ZOT’s SuperFollower Link will improve triggering sensitivi-ty by helping to keep the complete assemblyin top shape.

Compatibility: If parts of your present systemare still in good condition you can extendtheir life by assembling them on the ZOTSuper Follower Link weldmet. All Brunswickcomponents are compatible.

Additional Features: The Complete ZOTFollower Link Kit, includes all related compo-nent parts, including: ZOT’s ‘Steel’ FollowerLink, which has nearly 3-times the tensilestrength of the aluminum followers favoredby the original and other suppliers.

Reduced Maintenance = Increased Savings:The ZOT Super Follower Link will substantiallyreduce the frequency that you have to rebuildthis assembly, resulting in cost savings.

Eliminates “Play” Even if the nuts haveLoosened.

Super Link is the Solution. Damaged Kickbacks

All Brunswick parts work on ZOT Super Link

Double nut system keepshold down follower secure

Welded hardened studskeep all components

rolling in alignment

59

9

PitC

ushi

onAs

sem

bly

Pit Cushion AssemblyIndex

M

N

O

For Straight ‘A’ Pinsetters

Bolt-on Wishbone Brace Permanent Repair KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420010 (7-Pin Side)

#420011 (10-Pin Side)

Features & Benefits

No More Hazardous Welding in The Pit Area:This easy to install bolt-on kit re-supportsthe Tri-Plate and Cushion Arms to the properpivot location.

Instant Alignment: Eliminates misalignmentproblems affecting Triggering sensitivity.

Easy Lubrication: Features built-in greasezerk.

ZOT # Description Brunswick#A. 420005 RH Pit Cushion Arm (10 P/S) 12-250074-000B. 420006 LH Pit Cushion Arm (7 P/S) 12-250073-000C. 810005 Grommet 12-250189-000D. 520009 Steel Spacer (tri plate link) 12-250011-003E. 810007 Bearing Bronze (tri plate) 12-250248-000F. 620019 Link Tri Plate (Model ‘A’) 12-250016-000G. 420010 Bracket Assy. Wishbone (LH) 12-350800-052

420011 Bracket Assy. Wishbone (RH)H. 520049 X Washer Pin 12-250010-006I. 520010 Spacer (Grommet Steel 12-250011-002

Bushing)J. 420218 X Washer 11-230005-000K. 420012 Pit Cushion Assy. (Model ‘A’) 12-250166-051L. 420027 Pit Cushion Facing Leather 12-250012-000

(‘A’)M. 620023 LH Mounting Brackets 12-252005-003

620031 RH Mounting Brackets 12-252005-002N. 620032 “U” Bracket 12-252006-000O. 730176 Clamp Nut (spring Assembly) 11-180006-000P. 810006 Bearing (bronze) 12-250075-000Q. 420026 Rubber Patch Kit 12-250281-000

Brunswick Mini Cushion ConversionHardware for Straight ‘A’ Pinsetters.

A

B

C

D

E

FG

H

J

K

P

Q

59

60

60

62

62I

61

GreaseZerk

60


9

PitCushionAssem

bly

Replacement Pit Cushion ArmsFor Straight ‘A’ Pinsetters

#420006 (7-Pin Side)

#420005 (10-Pin Side)

Features & Benefits

Twice the Strength of OriginalArms: ZOT Replacement PitCushion Arms feature added steelreinforcing gusset plates at themain stress points for twice thestrength of the original arms.

No Hazardous Welding orModifications: The ZOT replace-ment arms simply bolt on.

Prevents Major Breakdowns: TheZOT reinforced design helps tokeep your pinsetters runningsmoothly.

Compare Our Price: We think youwill be pleasantly surprised.

Stabilizer Link Bushing KitFor Straight ‘A’ Pinsetters

#420003

Features & Benefits

Restores assembly to peakperformance, reduces leagueplay interruptions, and improves trigger sensitivity.

Tri-Plate Bushing KitFor Straight ‘A’ Pinsetters

#420007

Features & Benefits

Restore to ‘Like New’ Condition: The ZOT replace-ment bushings are manufactured to the precisespecifications of the original bushings.

Extended Life: ZOT Pre ‘Grease-Grooved’ Bushingswill outlast the originals even with infrequent orirregular additional lubrication.

Note: Kits do not include Tri-Plates which must bepurchased separately.

#420005

#420006

ImprovedHigh-TemperedSteel Casting

Priced 20%Less than

Brunswick

Model “A” Tri-Plates Only

#620019

61


9

PitC

ushi

onAs

sem

bly

Polyvinyl (PVC) Cushion CoversFor ‘A2’ & Jetback Pinsetters

#810029(Includes Tie-Wrap)

Features & Benefits

Polyvinyl (PVC): Long lasting ball andcushion damage protection

Non marking.

#700032(Heavy Duty Tie-Wrap only)

Leather Cushion CoversFor Straight ‘A’ and ZOT I Conversions

#420027

Features Benefits

Premium Grade Bull Hide: Lasts two to threetimes longer than synthetic covers.

For Straight ‘A’ & ZOT I Conversion #420024

Pit Carpet

#420506 .................Pricing Upon Product Release

ZOT’s Pit Carpet is manufactured to the same specifications asthe Original Equipment Manufacturers (OEM) product

The backing of this “Highly Durable” product is Latex Sealed,ensuring a good bonding surface for gluing

Carpet King

#420505

ZOT’s ‘Easy-to-Maintain” Hardwearing Rubberized WovenBelting Material Carpet King does an excellent job when itcomes to speeding up pins into the elevator.

Easy to Clean: The ZOT Carpet King features a Velcro styleHook and Latch strip making it easy to quickly remove forcleaning and positively attach to the existing pit carpet.

62


9

PitCushionAssem

bly

Factory Rebuilt Cushion AssemblyFor Straight ‘A’ and ZOT I Conversions

#420012

Rubber Patch KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420026

Features & Benefits

Reduce Waste: The one pound kit is divided into two easy-to-mix 2-section packets.

Easy to Mix: Simply remove the clip separating the two halves of onepacket and allow the contents of the ‘A’ half to mix with the ‘B’ half byhand squeezing (knead). After thoroughly mixing cut the bag and

apply compound. No more measuring to use less than a one pound kitand no messy measuring cups and stir sticks.

Reduce Maintenance Costs: Extends the life of pit cushions...savinghundreds of dollars of part replacements.

Note: We recommend use of #420046 Rubber Primer to ensure thebest adhesion to rubber surfaces.

#80 Liquid / .86 pound Kit

Features & Benefits

Time and Labor Saving Option: Let ZOT dothe hard repair work for you. Simply pur-chase a ‘ready to install’ ZOT Rebuilt PitCushion Assembly — Today!

Long Life Durability: ZOT rebuilt cushions arecovered with premium ‘Grade A’ 6-8 oz. BullHide, the only material that can last two tothree times longer than synthetic covers.

ZOT Exclusive: No other supplier, or originalmanufacturer, offers this assembly forStraight ‘A’’s, new or rebuilt. Only ZOT! Dueto core availability supplies may be limited.

Priced Right.Half the Cost of Devcon!!

Urethane Pit Shaker Mounts#420507 (rear)#420508 (front)ZOT’s Molded “Dynamic PerformancePolyurethane” (DPP) Pit Shaker Mounts arespecially formulated for High-Flex applica-tions, such as shock pads.These durablePit Shaker Mounts come complete withmounting hardware.

Front

Rear

63


9

PitC

ushi

onAs

sem

bly

Check out these features:

Say Goodbye to Welding: and re-welding broken upper shaker framesuntil welding is no longer an option.

Temporary or Permanent Repair: without welding.

Easy to Install: ZOT’s combination of Bolt and Clamp Repair Kit is easy toinstall as a temporary or permanent repair.

Added Strength: ZOT’s Repair Kit reinforces your upper shaker frame atits weakest point (with an additional gusset) at the center of the assem-bly on the tail plank side of the frame.

Added Support: ZOT’s Upper Shaker repair Kit is designed to enable youto add a 5th* shaker mount for added support.

*Note: The 5th shaker mount must be identical to the other four.Mismatched shaker mounts may distort and weaken the frame.

Upper Shaker Frame Repair Kit#420473

“Saves Money” the Total Cost of all thecomponents is hundred’s of dollars less

than replacing an entire frame.

# 420489Original Metal Shaker Mount (Front)

# 420491Upper Shaker StrutReplacement

# 420473Upper Shaker Frame Repair Kit

#420512

Original Metal Shaker Shock Mount (Rear)

# 420474Shaker Tube (1 1/4”) Repair

Rubber Pit Mount#420490Especially engineered for mechanics that prefer a more standard form of pit frame mount. ZOT’s RubberPit Mount has the same specifications and Durometer readings as the Original Equipment Manufacturer’s(OEM) product.

Ball Return AssemblyIndex

64

10

BallReturn

Assembly

A

6566

66

67

67

‘Y’ Switch Parts

67

F 69

68

66

C

B

D

E

66

For ‘A2’ and Jetback Pinsetters For Straight ‘A’, ZOT Conversion and Mini Jetback

ZOT Front Ball Lift Relay BoxFor all centers with Brunswick ‘S’Style Front Ball Lifts with two LiftWheels/Tires

#400208ZOT’s Front Ball Lift Relay Box is a directreplacement for the relay box on allBrunswick ‘S’ Style Front Ball LiftAssemblies with two Wheels or Tires,including AMF, Brunswick, Murrey andVantage.

Check out these benefits

Easy to Service: The entire relay PCBoard can be changed in minutes.

Easy to Install: The relay box can bechanged in minutes. All wire connec-tions feature solderless fittings.

Simple Design: Eliminates expensivemilitary style connector.

Circuit Protection: The Motor Circuit fea-tures a resettable breaker. When a ball-jam occurs simply clear the jam andreset the breaker.

Features & Benefits

Faster Bowling = Increased Revenues: ZOT’s Ball Accelerator improves the ballreturn time, without speeding up the pinset-ter, resulting in upwards of 15% increase inball return speed – depending on whichmodel you install, and on which machines.This translates into potential savings of any-where between 7 to 15 minutes for a typicalleague. Faster bowling makes the gamemore fun for both league and recreationalbowlers, and adds to your bottom line.

Fastest Wheel Driven Accelerator Available:ZOT’s acceleration time is twice as fast asany competitive wheel driven unit available,including the original manufacturers JetbackBall Booster.

Eliminates Crisis Breakdown Time:Whenever there is a problem with a ballbooster system your machines are down forhours when using competing product. Notso with ZOT’s Ball Accelerator. It’s the mostserviceable unit available. It reduces the irri-tation of difficult and costly acceleratormaintenance to belts, pulleys, etc. Andthere is nothing that can happen to ZOT’sBall Accelerator, that can prevent you fromrestoring your ball return function in undertwo minutes – guaranteed.

Proven Reliability: Has a forty year proventrack record.

Installs In Under An Hour: The ZOTAccelerator can be installed by a housemechanic.

Ball AcceleratorFor Mini Conversions And Straight ‘A’ Pinsetters

#420301 Maximum Acceleration (115V/60Hz)#420130 Standard Acceleration (115V/60Hz)#420322 Standard Acceleration (230V/50Hz)

Replacement PartsItem ZOT# Description1. 200003 Motor 2. 300006 Open Style Relays3. 300007 Closed Style Relays4. 400014 Relay Box Assembly5. 420148 Shaft Kit6. 420149 “T” Bolt Kit7. 420236 3/8”- 16 x 6 1/2” Bolt (2ea.)8. 420256 Vinyl Tubing9A. 420275 Key 3/16” Sq. x 2 1/2” (6ea.)

Item ZOT# Description9B. 420276 Key 3/16” Sq. X 1” (6ea.) 10. 520044 Shaft Only (Two Key Ways)11. 640054 Frame for 3 3/8” Pillow Block

Bearing 12. 640055 “T” Bolt Only13. 650019 End Bracket (T-Bolt)14. 650020 End Bracket (Standard)15A. 800024 2” Pulley15B. 800025 2 1/2” Pulley

Item ZOT# Description15C. 800026 3 1/2” Pulley16. 800028 Drive Wheel17. 800029 Large Pulley18A. 800030 Belt Slow For 2” Pulley18B. 800031 Belt Medium For 2 1/2” Pulley18C. 800032 Belt Fast for 3 1/2” Pulley19. 800033 Locking Collar20A. 810037 3 3/8” Pillow Block Bearing20B. 810038 3” Pillow Block Bearing

Note: With Mini Conversions and Straight ‘A’Pinsetters you need to add ZOT’s ‘Long’Three-Rail Ball Guide System #420059 for‘Maximum’ acceleration.

1

1416

17

5

6

7

8

10

11

12

13

9A 9B

19

15A

15B

15C

18A

18B

18C

20A

20B

2 3

4

65

Ball Return Assembly

10

Bal

lRet

urn

Asse

mbl

y

66


10

BallReturn

Assembly

Steel Tube TrackFor Subway Ball Returns with ‘A2’, Jetback and Straight ‘A’ Pinsetters

Features & Benefits

Direct Replacement: ZOT’s Steel Tube Track is a directreplacement for the original Brunswick 144” steel tubetrack, and is price competitive.

Ideal for New Installations and Surface to SubwayConversions: The ZOT Track is also compatible to the ZOTDrop Sweep Ball Track Assembly #420471 and #420330.

Can be Shipped by UPS: The ZOT Part #420319 (whichincludes 2 x 72" sections, and connecting inserts) can beshipped by UPS, which is less expensive.

12’ Sections: ZOT #640101 A typical installation requiresfive plus sections per ball return run.

Drop Sweep Tube TrackFor Straight ‘A’ Pinsetters and Mini Jetbackwith Subway Ball Returns

#420330 Features and Benefits

Direct Replacement: ZOT’s Drop SweepTube Track is a direct replacement forthe original 'A' & Jetback steel dropsweep tracks, neither of which is avail-able from Brunswick.

Ideal for New Installations: The ZOTDrop Sweep Tube Track is also compati-ble to ZOT Steel Tube Track Kit #420319& #640101 shown above.

Can be Shipped by UPS: Which reducesshipping costs.


Reduced League and Open Play Time:ZOT’s ‘Long’ Three Rail Ball GuideSystem holds the ball on the track asit’s propelled into the subway ballreturn. This allows you to double thespeed of your ZOT Ball Accelerator,save 5-7 minutes on a typical league;and with reduced power consumptionand maintenance.Prevents Ball Damage: The solid steelrails are covered with a replaceablenylon insert that protects the balls.


Give Your Center A New andMore Modern Look: WithZOT’s Ball Track Covers.

Easy to Install: The three-piece gray metal cover kitincludes all hardware neces-sary for easy installation.

Ships UPS: For Convenienceand Savings.

Support Bracket

#620158

Support Pipe

#640075

‘Long’ Three Rail Ball Guide SystemFor Mini Conversions and Straight ‘A’ Pinsetters

#420059

ModernAppearanceto Enhance Your Center

#420056

Track Cover KitFor Straight ‘A’ and Jetback Pinsetters

#420070#420070

#420319 2 each x 72" sections

#640101 1 x 144" section

For Jetback with Subway Ball Returns

#420471

Approach Down SweepFor Surface to Subway Conversions

#420486 Approach Down Sweep Track*

#420487 Odd Lane Side Guide Rail*

#420488 Even Lane Side Guide Rail**Must be ordered individuallyDirect Replacement: For connecting surface to subway tubetrack in centers where the concrete has been trenched out toenable the ball drop below the approach and feed into ‘S’Style Power Ball Lifts with two lift wheels/tires.

Note: When used with Maximum Speed Ball Accelerators you willneed to add ZOT’s ‘Short 3-Rail Ball Guide System #420056.

Odd Lane Side#420487

Even Lane Side#420488

#420486

Track AdaptorNot Included

NEW

NEW

67


10

Bal

lRet

urn

Asse

mbl

y

“Solve ‘A2’ Long Belt Tracking Problems – Today”

‘Y’ Switch Stop Conversion KitFor ‘A2’ and Jetback Pinsetter

#420072

Features & Benefits

Maintain Proper Belt Tracking: Long belt ten-sion adjustments are even more critical withtoday’s resin reactive bowling balls and laneoil conditions. ZOT’s Accelerator SupportConversion is the only affordable solution.

Reduces Wear On Pulley And Support Shaft:By repositioning the accelerator assemblythe belts tension and lateral movement isreduced as the ball passes the apex of thetrack.

Long belt rollsoff top of ball:Shifting beltsideways asball Is propelled

Features & Benefits

Big Cost Savings: ZOT’s UniqueKit is a better product and costsless than half of the originalmanufacturers replacement.

Reduced Maintenance: ZOT’s ‘Y’Switch Conversion Kit eliminatesworn out bumpers and brokenswitch stop brackets completely.ZOT’s unique design productdeadens switch bounce.

Easy To Install And Adjust: Thisfully adjustable conversion fea-tures a simple drill and boltinstallation.

Normal belt tension

Belt tension when ball is at apex of track

Reduced Tension after ZOT supportconversion is installed

‘Y’ Track Ball Deflector KitFor Mini Conversions and Straight ‘A’Pinsetters

#420284

Features & Benefits

Prevent Ball Damage: ZOT’s Spring SteelBall Deflector prevents balls from beingdamaged by derailing as they turn into thepinsetter ‘Y’ track.

Big Savings All Around: This kit, which isalready half the price of the original manu-facturers product, pays for itself every timeit prevents a resin reactive ball from con-tacting the pinsetter frame.

Accelerator Support Conversion KitFor ‘A2’ Pinsetters

#420206

Most Cost Effective Solution Available: ZOT’sKit is four to eight times less expensive thanreplacing flat surface pulleys with highcrowned accelerator pulleys.

Returns Two Or Three Balls At One Time –Without Belt Shift: ZOT’s Kit will improve theoverall belt tracking over the ball.

Only Available From ZOT: No other manufac-turer offers this cost effective solution.

68


10

BallReturn

Assembly

Heavy Duty ‘Y’ Track WeldmetFor ‘A2’ and Jetback Pinsetters#640042

“A mechanics nightmare and an ongoing issue is finally resolved”

Features & Benefits

Direct Replacement: This producthas been manufactured to conformto the original mounting connections.

Reinforced Design:It also incorpo-rates I-Beam technology forgreater durability and longer life.

Ten-Times Stronger at CommonFailure Point.

Modified ‘Y’ Switch Stop BracketFor ‘A2’ and Jetback Pinsetters#620067

With added securing options

Features & Benefits

Positions Bumper Correctly: Replacingbent ‘Y’ Switch brackets reduces balljams.

Additional Mounting Holes: If ‘Y’ Switchtrack breaks at stop bracket the ZOT brack-et can be mounted on the kickbacks.

Features & Benefits

Bolting ZOT’s Modified ‘Y’ Switch Stop Bracket#620067 to the kickbacks reduces breakageto the ‘Y’ Track weldmet.

Adding ZOT’s Auxiliary ‘Y’ Stop MountingBracket Kit to the Modified ‘Y’ Track weldmetensures the fixture remains secure.

Note: The Auxiliary ‘Y’ Stop Mounting Bracketkit requires #620067.

Auxiliary ‘Y’ Stop Mounting Bracket Kit#420304

I-Beamtechnology

Threaded

Reinforced Channel Iron for Greater Durability

69


10

Bal

lRet

urn

Asse

mbl

y

Urethane ‘Y’ SwitchFor ‘A2’ and Jetback Pinsetters

#680005

Features & Benefits

Urethane: Non-marking, gentle on high-end bowling balls.Rugged construction for years of dependable service.

Rigid Polymer: A strong material that eliminates bending whichcauses ball stops. The ZOT product will never require shimming.

‘Y’ Switch Shaft#520159

Features & Benefits

Longer Threads: Allows shimming of ‘Y’ Switch height.

Protective Finish: Wear resistant finish for years of dependable service.

Urethane ‘Y’ Switch Plate Spacer#680007

Urethane ‘Y’ Switch Bumper#680006

Features & Benefits

Pull-through Retainer: No metal stud to become exposed that maycause damage to expensive high-performance bowling balls.

Features & Benefits

Isolates Vibration: Reduces breakage to trackweldment and other related metal parts.

Tired Of Flat Gutter Related Ball And Pin Damage?…Tired OfRe-drilling Holes To Re-Anchor Flat Gutters?

With ZOT’s Threaded Steel Flat Gutter Anchors there’s no more needto redrill flat gutters that have become loose. ZOT’s Threaded SteelFlat Gutter Anchors are a permanent solution to this age old problem.

Flat Gutter Anchor

#420343 Complete One-Lane Kit(Includes hold down screws and 4-Threaded Steel Flat GutterAnchors for tail-plank end, & 4 Anchors for cross foundation tosecure 2 x Flat Gutters)

#420361 Individual Anchors, Tail Plank End

#420362 Individual Anchors, Cross Foundation

11

Lane Products

70

Lane Products

ZOT PermaDeck Back-End Lane Products

ZOT Pinsetter Parts is pleased to introduce a new line of back endlane products including flat gutters, kickback plates, edge boardsand tail plank tops. All of these products are made from industrial-ly engineered HDPE (High Density Polyethylene) As the namewould imply, HDPE is durable, requires no maintenance, and itnever needs recoating with finish. To maintain quality and durabil-ity none of ZOT’s HDPE products use recycled materials. ZOT’sback end lane products are also ABC approved.

• ZOT’s Kick Back Plates are undrilled enabling the installer to drillholes and screw the kick back plates into kick back surfaces wherethere are no old or enlarged holes, ensuring a secure installation

PermaDeck Flat Gutter Kit For AMF & Brunswick

#420479 (for one lane)


• Costs less than comparable products.• Virtually maintenance free and durable.• Made of 1” thick “Warp Resistant” HDPE for maximum strength

and life. Note: less expensive brands use 3/4” plastic whichtends to warp and has a much shorter lifespan.

• Easy to install: either by the center mechanic or a lane resurfacer.

ZOT PermaDeck Kickback PlatesFor AMF & Brunswick (Black & Undrilled)

#42048215” x 33” fits all AMF and early modelBrunswick

#42048319” x 23 3/4” for early model Brunswick

#42048416” x 40” for late Brunswick


• Highly durable.• Restore your kickbacks to ABC

Specifications.• Improves scorability and reduces pin

damage. • Easy to install.

ZOT PermaDeck Tail Plank TopsFits AMF & Brunswick Wood Pindecks

#4204811 3/4” x 1 1/2” x 43” (per lane)

#420511Fits Brunswick & Synthetic/HPL Pindecks1/2” x 2 3/8” x 41 7/8” Check out these features:

• Restores your tailplanks to ABCSpecifications.

• Improves scorability.• Extend the life of your pins.

ZOT PermaDeck Edge BoardsFits AMF & Brunswick Wood Pindecks

#4204801” x 2 1/2” x 46” (each)

#420510Fits Brunswick & Synthetic/HPL Pindecks1/2” x 2 3/8” x 47 5/8”Check out these features:

• Restores your wooden pindecks to ABCSpecifications.

• Helps improve scorability.• Extends the life of your pins.

NEW

11

Lane

Pro

duct

s

71

Lane Products

ZOT’s GlowRod Fascia and Quarter Round Trim products aredesigned to improve the appearance and highlight the riser orstep from the bowlers settee area to the approach. The GlowRodFascia and Quarter Round Trim (shown in the illustration below)

clearly highlights the riser in either a Glow or Non-Glow Bowlingenvironment which, in addition to enhancing the image of yourcenter, brings safety to the equation too — especially during Glow-Bowling activities.

GlowRod Fascia & Quarter Round TrimCheck these features:Improved Safety: The GlowRod Fascia illuminates in anUltra Violet (Glow Bowling) lighting environment, clearlyhighlighting the riser or step-up to the approach. The UVadditive in the rod will Glow under Ultra Violet Light withno additional power necessary.

Durable: Made of virtually indestructible industriallyengineered HDPE (High Density Polyethylene) that willoutlive the life of your approaches.

Maintenance Free: ZOT’s GlowRod Fascia and QuarterRound Trim never needs painting, and will look good for10-15 years without cracking or splitting.

Cost Effective: Costs about the same as replacing theoriginal, and less durable, worn and damaged maplefascia.

Note: ZOT’s GlowRod is sold by the foot and separatelyfrom the Fascia. See below for color selection and partnumbers, etc.

How it all works:You start by measuring the height of the riser (step) fromthe settee area to the the approach, and then the lengthof the fascia needed to extend across the width of theapproaches.

Note: Fascia and Quarter Round Trim (with or withoutGlowRod) is a custom product that’s “Made-to-Order”.

Once you have the specifications and place an orderwith ZOT it will take a few weeks to process (custombuild) and ship the finished product.

Here are three options:

Option 1ZOT’s HDPE Fascia and Quarter Round Trim is designedto be used as a replacement for the original wood fascia.

ZOT GlowRod Fascia and Quarter Round Trim for Approaches

NEW

Option 2HDPE Fascia and Quarter Round Trim is also available with a groove toaccommodate the installation of a Glow Rod, which is an optional add-on.

Option 3Glow Dowels can also be added to either Option 1 or 2.

Part # DescriptionFascia With & Without Quarter Round Trim(Order Glow Rod and Glow Dowels Separately)

800137 1” NO/Quarter Round Trim –NO GLOW

800138 1.5” NO/Quarter Round Trim – NO GLOW

800139 2” W/ Quarter Round Trim

800140 2.5” W/ Quarter Round Trim











Part # Description

Quarter Round Trim, GlowRod & Glow Dowels

800151 Quarter Round Trim

GLOW ROD for installing in Fascia (add to per foot price of fascia)

420493 Glow Rod — Yellow/Green

420494 Glow Rod — Green

420495 Glow Rod — Red

420496 Glow Rod — Orange

GLOW DOWELS for installing in Fascia

420501 Glow Dowels — Four Dowels per foot

• Glow Dowels are factory installed in the Fascia• All orders for Fascia include Mounting Screws Fascia, Quarter Round

Trim and GlowRod are shipped in 5-foot lengths and can thereforebe shipped by UPS

72

Pinsetter Conversion Kits

12

PinsetterConversion

PHASE I

Replaces Brunswick #12-862608-008

Note: order by ZOT part number to ensure bestprice and features

PHASE III

ZOT II Conversion Components

“Featured are the main components–and how theywork and relate to your Straight ‘A’ Pinsetters”

Phase I

ZOT Infrared Triggering

#400150100% Positive Triggering: ZOT’s Triggering features anInfrared Sensor Source that’s Solid State Diode rated for millions of hours of dependable service – which means 100% Positive Triggering…regardless of ballweight or speed.

Easy to Align: ZOT’s Infrared Triggering features an exclusive 4-unit LED system which indicates when the sensorsignal is strongest.

Kit Includes: Four Triggering components for the most com-plete Electronic box upgrade in the industry.

#400145 Time Delay Plus System

#400147 Expander Card

#400144 Infrared Sensor ‘add-on’ Kit

#420001 Electronic Gearbox Trip Assembly

Preferred Sensor Mounting: ZOT Time Delay PlusSystem for Straight ‘A’ pinsetters include #400021 Mercury Switch Kit, enabling the installer to mountthe Infrared Sensor behind the Rake (in the Rake Path).

Note: For a more detailed description of ZOT triggering,see pages 22-29.

Phase III

ZOT Ball Accelerator

#420301 (Maximum Acceleration)

#420130 (Standard Acceleration)

Fastest Wheel Driven Accelerator Available: ZOT’s BallAccelerator improves ball return time by upwards of 15%,without speeding up the pinsetter. This acceleration time istwice as fast as any competitive wheel driven unit available.

Eliminates Crisis Breakdowns: ZOT’s Ball Accelerator can beinstalled by a house mechanic in under an hour! There’s nothing that can happen to ZOT’s Ball Acceleratorthat can prevent you from restoring your ball return function in under two minutes – guaranteed!

Ball Guide: Order a Three-Rail-Guide, or Down-Sweep-Cover separately (for a more detailed description of theseproducts, see page 66).


73


12

Pins

ette

rCo

nver

sion

PHASE II

RakeLoweringHardware

Replaces Brunswick #12-862907-000

Note: order by ZOT part number to ensure best priceand features

“ZOT Offers ‘Four’ AttractiveOptions to Update Your Straight ‘A’Pinsetters”

Phase II

ZOT Electronic Fast Drop Rake

#420159Faster Ball Return: Instantaneous rake drop will elevate the cushion sooner, for a ball return that’s 4-seconds faster. This may not sound like much, but it translates into savings of 15-17 minutes for a typical5-person team league.

Reduce Dead Wood: Instantaneous rake drop will stop pins from rolling out from the pindeck, and onto the lane surface – eliminating the need to retrieve the pin; and score correction problems caused by inexperienced bowlers.

Note: For a more detailed description of this system see page 51.

PHASE IV

Phase IV

ZOT Cushion Suspension

#420414‘A2’ Cushion: Includes new ‘A2’ style cushion and retailed suspension hardware, made to the same specifications as the origi-nal manufacturers product. Several of the ZOT parts are of a heavierduty design, but all of the parts in this phase are interchangeablewith parts from the original equipment.

Pivoted Suspension: The ‘A2’ style Cushion Suspension Kitfeatures a pivoted cushion which allows the cushion to ‘roll’ withthe ball impact. A hydraulic shock absorption system greatlyreduces damaging ball impact to the pit cushion – resulting in hugecost savings.

Extended Pinsetter Life: In Phase IV, hundreds of worn, and metalfatigued, parts are replaced. This high wear area of your pinsetter isreplaced with an upgrade system. Some of the parts you discard areno longer available from the original manufacturer.

Note: You must have Phase I & II installed to yield peak performance from Phase IV.

(continued)

74


12

PinsetterConversion

ZOT I Conversion Service Manual#160082Includes:• Total exploded diagrams of all models• produced from 1964 to present.• Adjustment Section.• Trouble Shooting Section.• Lubrication Guide.

ZOT I Conversion Suspension Package (includes exchange cushion)

#420166

Section E —Suspension Bolt Assembly

Section C —Lift Spring Assembly

Section D —Stabilizer Arm Assembly

Section F —Air Shock Absorber Assembly

A6

A7

A5

A4A3

A2A1

with counterbore

without counterbore

Complete Cylinder & Piston Assembly#420127

75


12

Pins

ette

rCo

nver

sion

Air Shock Seal Kits#420146Eliminates Ball Jams in Pin Wheel: Properoperating air shock stops the ball at thecushion.Retain: Properly operating air shock willreduce ball impact damage in relatedparts.

Section A — MiscellaneousItem Part Description Order Old

Number Number1 Cushion Mounting Plate Assy. 420139 10311-0-02 Curtain Hanger Casting 650009 10105-013 Grommet (Hour Glass Shape) 810005 10202-024 Pit Cushion Arm 10-pin side Assy 420093 10202-05 Pit Cushion Arm 7-pin side Assy 420094 10203-06 Spring Bar 10-pin side Assy 420101 ALL7 Spring Bar 7-pin side Assy 420104 ALL

Section B — Tri-Plate Assembly1 Tri-Plate 620019 10101-012 Steel Space Bushing 520009 10101-023 Bronze Bushing 810007 10101-034 Nylatron Washer 420211 10101-045 3/8” – 16 x 2 1/2” S.H.C.S. 420212 10101-056 3/8” – 16 Lock Nut 420213 10101-06

Section C — Lift Spring Assembly1 Lift Spring 850008 10210-022 Spring Plug 650011 10110-033 Female Uni-ball 810045 10110-044 5/16” – 24 x 4” Stud 420231 10110-055 5/16” – 24 Hex Nuts 420232 10110-066 5/16” – Flat Washers 420233 10110-077 5/16” – 18 x 1 1/2 H.H.M.S 420234 10110-088 5/16” 18 Lock ut 420235 10110-099 Male Uni-Ball 810034 10111-02

Section D — Stabilizer Arm Assembly1 Turnbuckle Body 650008 10204-012 End Mount (Mach. End) 640046 10204-023 End Mount (Arm End) 640047 10204-034 Fiber Washers Arm End (Thin) 420223 10204-045 Fiber Washers Mach. End 420215 10104-056 Urethane Grommet Mach. End 810004 10204-067 Bronze Bushing Mach. End 810032 10104-078 Urethane Grommet Arm End 810033 10204-089 Bronze Bushing Arm End 810007 10104-09

10 “X” Washer Pin 520049 10104-1011 “X” Washer 420218 10104-1112 5/8” – 11 R.H. Ex. Heavy Nut 420219 10104-1213 5/8” – 11 L.H. Ex. Heavy Nut 420220 10104-1314 5/8” – Lock Washer 420221 10104-1415 Tab Lock Washer 740129 10104-15

Section E — Suspension Bolt AssemblyItem Part Description Order Old

Number Number1 Suspension Bolt Assembly 420105 10113-012 Urethane Grommet 810033 10213-023 Bronze Bushing 810007 10113-034 Fiber Washer (Thin) 420223 10113-045 Square Head “X” Washer Pin 520058 10213-056 “X” Washer 420218 10113-067 5/8” – 18 Hex Nut 420244 10113-078 5/8” – Lock Nut 420221 10113-089 5/8” – Flat Washer 420245 10113-09

Section F — Air Shock Absorber Assembly1 Air Cylinder w/counterbore 640052 10218-01

Air cylinder w/o counterbore 640051 10181-012 End Mount Assembly 420147 10218-023 Urethane Grommet 810033 10281-034 Bronze Bushing 810006 10118-045 Steel Spacer Bushing 520009 10118-056 Fiber Washers 420223 10118-067 Air Intake Valve 420161 10118-078 Adjustable Air Outlet Valve 420162 10218-089 1/4” – 20 x 1/2” B.H.S. 420255 10118-09

10 3/8” – 16 x 1 1/4” H.H.M.S. 710131 10318-1011 3/8” – 16 x 2 1/4” H.H.M.S. 710141 10218-1112 3/8” – 16 Hex Lock Nut 420213 10218-1213 Mount Bracket 650018 10117-0114 Piston Rod End Mount 420143 10217-0215 3/4” 16-Bulk Head Nut 420247 10117-0516 3/4” Split Collar (Threaded) 800020 10317-06

3/4” Split Collar (No Threads) 800022 10217-0617 Piston Rod (With Flat) 520053 10217-07

Piston Rod (No Flat) 520050 10417-0718 Piston Rod Spring 420248 10117-0819 Spring Sleeve 420249 10117-0920 Washer (special) 420250 10117-1021 Cyl. End Cap (Inc. Flange Bushing) 520051 10217-1122 Flange Bushing 810036 10117-1223 Aluminum Piston 520052 10217-1324 Teflon Ring 420253 10217-1425 Gasket 420251 10117-1526 Flat Machinery Shim 420254 10217-1627 “X” Washer Pin 520049 10117-1828 “X Washer 420218 10117-1929 3/8” – 16 x 3/4” Gr. 2 MS 420252 10117-2030 3/8” Flat Washer 420241 10117-22

For Accelerator parts see page 65For Electronic Fast Drop Rake parts see page 51

Section B — Tri-Plate Assembly

ZOT Brunswick Catalog

Documents

Transcript of ZOT Brunswick Catalog