Willkommen Welcome to KNF - presentation
Transcript of Willkommen Welcome to KNF - presentation
KNF modular system, way to Project
pump heads available in: - aluminium - plastics (PPS, Peek …)- stainless steel- PTFE
diaphragms und valves available in:- Neopren- EPDM- Viton- Teflon- Kalrez
Motors:- different kind of AC / DC motors - in all worldwide necessary voltage / frequency combinations
Gas pumps for analyzer applications
Micro gas pumps
Mini gas pumps
Diaphragm Vacuum Pumps and Compressors
EX - Proof Vacuum Pumps and Compressors
Heat resist and heated gas pumps
Micro Gas Pumps
Defence / Security
• Portable (hand held) explosives and illegal drug detector.
Portable gas Analyzers
• Portable (hand held) air or food quality detector.
Medical analyses
• (Anesthesia) gas monitoring
Micro Diaphragm Gas Pumps
NMP05 – 015:
� Different motors, S (up to 300h), M (up to 600h), L (up to 2000 h), B (up to 10 000h)
� One way product
� Small size, for portable applications
� Flow adjustment possible thought motor speed
Micro Diaphragm Gas Pumps
NMS020:
� Different motors, S (up to 300h), L (up to 2000 h), B (up to 10 000h)
�Small size, for portable applications
� Low current draw
� Flow adjustment possible thought motor speed
Micro Diaphragm Gas Pumps
NMP830 – 850:
� Different motors, DC – Brush, DC – Brushless, NMP830 also with AC-Motor
� Replacement of ware parts possible
� Small size, for portable applications
� Flow adjustment possible thought motor speed and small eccentric
� Many combinations on project base possible
Mini Gas Pumps
Industry and Analyses• Gas monitoring for industry and food production• Sample draw systems for drink / waste water / milk• Gas monitoring for environmental technology• Gas transfer without contamination
Mini Diaphragm Gas Pumps
N85 – 814:
� Different motors, DC – Brush, DC – Brushless (on request), AC-Motor
� Simply and economical design
� Flow adjustment possible
� Many different modifications on project base possible
Mini Diaphragm Gas Pumps
N815 – 838:
� Different motors, DC – Brush, DC – Brushless (on project base), AC-Motor
� Simply and economical design
� Flow adjustment possible
� Many different modifications on project base possible
Diaphragm Vacuum Pumps and Compressors
Industry and Analyses• Sample draw systems for drink / waste water• Compressor for liquid filtration• Gas transfer pump for dangerous or high value gases• Gas tight sample draw
N022 - 026:
� AC-Motor, 3 – phase motor
� Gas tight design possible
� N026 - model is available also with Ex – proof motor
� Many different variations on project base possible
Diaphragm Vacuum Pumps and Compressors
N035:
� AC-Motor
� Gas tight design possible
� Many different variations on project base possible
Diaphragm Vacuum Pumps and Compressors
N860 - 0150:
� AC-Motor, 3 – phase motor
� Gas tight design possible
� N0150 - model is available also with Ex – proof motor
� Many different variations on project base possible
Diaphragm Vacuum Pumps and Compressors
2 bar g115 mbar abs220 l/minN0150.1.2_T.9E EX
2 bar g115 mbar abs120 l/minN0150_T.9E EX
4 bar g100 mbar abs45 l/minN186.1.2_T.9E EX
4 bar g100 mbar abs27 l/minN143_T.9E EX
2.5 bar g100 mbar abs33 l/minN026.1.2_T.9E EX
2.5 bar g100 mbar abs17 l/minN026_T.9E EX
1.5 bar g53 mbar abs16 l/minN726FTE EX
1.5 bar g140 mbar abs7.5 l/minN87TTE EX
PressureVacuumFlow RateModel Number
EX - Proof Vacuum Pumps and Compressors
EX - Proof Vacuum Pumps and Compressors
N87TTE EX
Performance:
- Free delivery: 7,5 l/min (STP)
- Ultimate vacuum: 140 mbar abs.
- Max. operation pressure: 1,5 bar G (100% duty)
Design Materials:
- Pump head: PVDF, on project base Aluminum and SS possible
- Diaphragm: PTFE coated, on project base EPDM possible (H2 applications)
- Valves: FFPM, on project base EPDM possible (H2 applications)
Explosion protection:
- Motor: Single phase IP54, EEx de IIC – T4, ATEX
- Pump head: EEx IIB –T4 (PVDF), ATEX
- On project base: EEx IIB + H2 – T4 for H2 applications (aluminum and SS head), ATEX
EX - Proof Vacuum Pumps and Compressors
N726FTE EX
Performance:
- Free delivery: 13 l/min (STP)
- Ultimate vacuum: 53 mbar abs.
- Max. operation pressure: 1,5 bar G (100% duty)
Design Materials:
- Pump head: massive PTFE
- Diaphragm: PTFE coated
- Valves: PTFE
Explosion protection:
- Motor: Single phase IP44, EEx II – T3, ATEX
- Motor: 3 – Phase IP44, EEx II – T4, ATEX
- Pump head: EEx IIB –T4 (PVDF), ATEX
On project base:
- Available also double head version (20 LPM or 10 mbar abs.)
- Available also as a heat resistant version up to 200 °C
EX - Proof Vacuum Pumps and Compressors
N026.x A/ST.9E EX
Performance:
- Free delivery: N026A/ST.9E 15 l/min (STP), N026.1.2A/ST.9E 26 l/min (STP),
- Ultimate vacuum: 100 mbar abs.
- Max. operation pressure: N026A/ST.9E 2,5 bar G, N026.1.2A/T.9E 2,0 bar G
Design Materials:
- Pump head: Aluminum or SS
- Diaphragm: PTFE coated, on project base EPDM possible (H2 applications)
- Valves: SS
Explosion protection:
- Motor: Single phase IP44, EEx eII – T3, ATEX
- Motor: 3-phase IP44, EEx eII – T4, ATEX
- Pump head: EEx IIB –T4, ATEX
- On project base: EEx IIB + H2 – T4 for H2 applications, ATEX
Gas tight: 6 x 10-3 mbar l/s (tested)
EX - Proof Vacuum Pumps and Compressors
N143A/ST.9E EX and N186.1.2A/ST.9E
Performance:
- Free delivery: N143A/ST.9E 27 l/min (STP), N186.1.2A/ST.9E 48 l/min (STP),
- Ultimate vacuum: 100 mbar abs.
- Max. operation pressure: 4 bar G (100% duty)
Design Materials:
- Pump head: Aluminum or SS
- Diaphragm: PTFE coated, on project base EPDM possible (H2 applications)
- Valves: SS
Explosion protection:
- Motor: 3-phase IP54 or 55, EEx eII – T3 or EEx de IIC – T4 ATEX
- Motor: Single phase IP54, EEx de IIC – T4, ATEX
- Pump head: EEx IIB –T4, ATEX
- On project base pump head: EEx IIB + H2 – T4 for H2 applications, ATEX
Gas tight: 6 x 10-3 mbar l/s (tested)
On project base: gas tightness 6 x 10-6 mbar l/s possible
EX - Proof Vacuum Pumps and Compressors
N0150A/ST.9E EX and N0150.1.2A/ST.9E
Performance:
- Free delivery: N0150A/ST.9E 120 l/min (STP), N0150.1.2A/ST.9E 220 l/min (STP),
- Ultimate vacuum: 115 mbar abs.
- Max. operation pressure: 1 bar G (100% duty)
Design Materials:
- Pump head: Aluminum or SS
- Diaphragm: PTFE coated, on project base EPDM possible (H2 applications)
- Valves: SS
Explosion protection:
- Motor: 3-phase IP55, EEx eII – T3 or EEx de IIC – T4 ATEX
- Motor: On project base, Single phase IP54, EEx de IIC – T4, ATEX
- Pump head: EEx IIB –T4, ATEX
- On project base pump head: EEx IIB + H2 – T4 for H2 applications, ATEX
Gas tight: 6 x 10-3 mbar l/s (tested)
On project base: gas tightness 6 x 10-6 mbar l/s possible
- Gas Analysis
- Process
- Petrochemical
EX - Proof Vacuum Pumps and Compressors
Condensate
Pump
Filter
Heat exchanger
Heat exchanger
Analyzer
Flue gas
sampling
1.5 bar g180 mbar abs100 l/minN0100_T.__E
1.5 bar g240 mbar abs15 l/min
On project base
N026FT.16E
(chemical resist)
1.5 bar g200 mbar abs60 l/minN036.0_T.__E
1.5 bar g200 mbar abs30 l/minN036_T.__E
1.5 bar g200 mbar abs18 l/minN024_T.__E
1.5 bar g240 mbar abs10.5 l/minN012_T.__E
1.5 bar g290 mbar abs6 l/minN86_T.__E
PressureVacuumFlow RateModel Number
Heat resist and heated gas pumps
AC motor
N024 ST. 16 E
Pump typeN86
N012
N024N036
N036.0
N0100
PTFEPTFEStainless steel
ST
PTFEPTFEAluminumAT
ValvesDiaphragmHeadCode
Electrically heated, with Electronic Temperature Control to 240 °C.26
Electrically heated, with Thermostat to 240 °C.11
Temperature resistant to 240 °C.16
Heat resist and heated gas pumps
- FID (Flame Ionization Detector
- Process Gas Analysis
- Engine test benches
Heat resist and heated gas pumps