VS SERIES SYSTEM VALVES - IMI Precision...
Transcript of VS SERIES SYSTEM VALVES - IMI Precision...
®®
®®
AUSTRALIA
Tel: +61 3 921 30 800
Fax: +61 3 921 30 890
AUSTRIA
Tel: +43 22 36 63 520
Fax: +43 22 36 63 520 20
BELGIUM & LUXEMBURG
Tel: +32 2 333 44 11
Fax: +32 2 333 44 88
BRAZIL
Tel: +55 11 5698 4000
Fax: +55 11 5698-4001
CANADA
Tel: +1 303 794 2611
Fax: +1 303 795 9487
CHINA
Tel: +86 21 64 85 69 09
Fax: +86 21 64 95 60 42
CROATIA
Tel: +386 4 5317550
Fax: +386 (64) 7000949
CZECH REPUBLIC & SLOVAKIA
Tel: +420 465 612 879
Fax: +420 465 612 908
DENMARK
Tel: +45 44 91 41 66
Fax: +45 44 91 15 60
FINLAND
Tel: +358 95 712 140
Fax: +358 95 712 1440
FRANCE
Tel: +33 1 60 04 95 95
Fax: +33 1 60 43 18 86
GERMANY
Tel: +49 2802 49–0
Fax: +49 2802 49356
HONG KONG
Tel: +852 2492 7608
Fax: +852 2498 5878
HUNGARY
Tel: +36 1 284 9000
Fax: +36 1 284 8980
INDIA
Tel: +91-120-3089500/4089500
Fax: +91-120-3089700
IRELAND
Tel: +353 1 8300 288
Fax: +353 1 8300 082
ROMANIA
Tel: +40 31 425 17 06
Fax: +40 31 425 17 08
RUSSIA
Tel: +7 495 710 8661
Fax: +7 495 710 86 62
SINGAPORE
Tel: +65 6862 1811
Fax: +65 6862 1886
SLOVENIA
Tel: +386 4 531 7550
Fax: +386 4 531 7555
SPAIN
Tel: +34 93 748 9800
Fax: +34 93 783 0838
SWEDEN
Tel: +46 40 59 51 00
Fax: +46 40 49 50 90
SWITZERLAND
Tel: +41 71 973 82 00
Fax: +41 71 973 82 01
TAIWAN
Tel: +886 33162673
Fax: +886 33162910
THAILAND
Tel: +66 2750 3598
Fax: +66 2750 3855
UK
Tel: +44 1543 265 000
Fax: +44 1543 265 811
UKRAINE
Tel: +38 095 276 42 25
Fax: +38 044 574 60 36
USA
Tel: +1 303 794 2611
Fax: +1 303 798 4856
Supported by distributors worldwide
www.norgren.com
ITALY
Tel: +39 039 60 631
Fax: +39 039 60 63 301
JAPAN
Tel: +81 6 6876 8913
Fax: +81 6 6876 8929
MALAYSIA
Tel: +60 3 5121 9255
Fax: +60 3 5121 2889
MEXICO
Tel: +52 55 1500 64 00
Fax: +52 55 1500 64 30
NETHERLANDS
Tel: +31 36 548 6828
Fax: +31 36 548 6838
NEW ZEALAND
Tel: +64 9 579 0189
Fax: +64 9 526 3398
NORWAY
Tel: +47 67 90 82 01
Fax: +47 67 97 06 24
POLAND
Tel: +48 22 518 9530
Fax: +48 22 518 9531
a subsidiary of IMI plc
The Roundel,’Norgren’ and ‘IMI’
are registered trade marks
© Norgren Limited 2008.
Due to our policy of continuous
development, Norgren reserve
the right to change specifications
without prior notice.
z7102 en/11/08
VS SERIES SYSTEM VALVES
MODULAR, VERSATILE, RELIABLE AND MAINTENANCE FRIENDLY
02 03
Field expandability has reached new levels with Norgren’s
VS18, VS26, and VS45 system valve range. Whether using a
simple multipole or a complex fieldbus system, expanding
the size of your valve island to match the changing
demands of your equipment is a simple “plug-and-play”
experience. Norgren’s plug-in Printed Circuit Board (PCB)
technology takes only seconds to install and additional
sub-bases can be attached with only two screws.
The VS18, VS26, and VS45 valve islands are
unique in offering two spool technologies.
To maximize the speed of your pneumatic
system, use Norgren’s softseal spool
to achieve enhanced flow rates. For
extended life, our glandless spool and
sleeve delivers hundreds
of millions of trouble-free cycles.
Or incorporate both spool technologies
within the same valve manifold to optimize
your machine’s performance.
Norgren’s VS Series gives you the versatility to
choose the features you need with the modularity to
easily expand and add accessories. By combining flexibility
and Swiss-engineered quality, Norgren has created a
no-compromise valve range with unlimited ability.
INNOVATION
2 patents, 6 pending for New VS45
Universal PNP/NPN 24V d.c. Multipole connection
Full Wave rectification and regulation for 115V a.c.
connections, allowing the use of standard 24V d.c. valves
One Piece Solid PCB valve connection system,
eliminating potential bad connections
Extensive multi-pressure options, allows pressure/
vacuum zoning within the same valve island
MODULAR
Field expandable in single stations
Any number of valves up to 16
Extensive sandwich accessory options
Three sizes of plug-in sub-base valves
Flow from 550 to 4200 l/min.
VERSATILE
Two spool technologies with unique advantages
Universal PNP/NPN 24V d.c. multipole
Eleven valve configurations
Two multipole voltages
Five integrated fieldbus protocols
Numerous porting and manual override options
Millions of possibilities
RELIABLE
200 million cycles valve life (glandless spool and sleeve)
Robust construction
IP 65 and NEMA 4
Durable electrical technology
MAINTENANCE FRIENDLY
Simple plug-in sub-base valve exchange
Interruption-free valve replacement option
Easy exchange of system components
»»»
»
»
»»»»»
»»»»»»»
»»»»
»»»
NO COMPROMISE DESIGN... ...WITH UNLIMITED CAPABILITY
VS SERIES SYSTEM VALVES VS SERIES SYSTEM VALVES
04 05 06
57
6
1
53
52
54
55
07
GLANDLESS OR SOFTSEAL SPOOL VALVES –
THE RIGHT TECHNOLOGY, FOR EVERY APPLICATION
For a higher flow rate use Norgren’s softseal spool.
For maximum reliability choose our glandless spool technology.
Or simply use both to optimize your machine performance.
VS SERIES QUICK GUIDE VS SERIES ADVANTAGEAdd up to 4 stations easily
No need to disassemble the valve island (no tie rods)
Simple installation
Plug-in sub-base valve
Correct connection guaranteed
Simple plug-in electronics
Only seconds to install
Only 2 screws for additional sub-base attachment
Integrated fittings (VS18/VS26)
Reduce installation time, minimize leak paths
1
2
3
4
5
Total reliability
Glandless spool and sleeve deliver millions
of trouble-free cycles
Maximum speed
Soft seal spool for enhanced flow rates
6
7
PRESSURE CONTROLFour choices of pressure regulator
sandwich plates provide individual
pressure and force control as well
as optimized air consumption.
FLOW CONTROLFlow control sandwich plate
provides actuator speed control.
INLET AIR CONTROL (VS18/VS26)
Single valve shut-off plate allows
exchange of valve while valve island
is pressurised.
SINGLE STATION SUB-BASEFor applications requiring single
valves located remotely from the
valve island.
MULTI-PRESSURE CONTROLIntermediate supply & exhaust
manifold and blanking discs enable
simple and sophisticated multi-
pressure designs.
ACCESSORIES
FIELDBUS
Compact size through integrated electronics
Field expandable up to four additional stations
Reliable communications with moulded cables
Wide range of protocols offered
VS SERIES GIVES YOU OPTIONS
PLUG-IN TECHNOLOGY
CONFIGURE YOUR VS SERIES
VALVE ISLAND AT » vi.norgren.com «
MULTIPOLE
24V d.c. and 115V a.c. voltage options
Wide range of electrical connections
Field expandable up to four additional stations
One universal 24V d.c. PCB for both PNP/NPN
PNEUMATICS
Three sizes, 18 mm, 26 mm and 45 mm width
Valve islands up to 16 station (32 solenoids)
VS18 and VS26 comply with ISO 15407-2 standard
Simple multi-pressure functionality
2 x 3/2 valves in one body
2 x 2/2 valves in one body (VS18/VS26)
Size Spool Flow Max. op. Spool technology
type l/min pressure rating
VS18 Glandless 550 16 bar 200 million cycles
VS18 Softseal 650 10 bar 50 million cycles
VS26 Glandless 1000 16 bar 200 million cycles
VS26 Softseal 1350 10 bar 50 million cycles
VS45 Glandless 3200 16 bar 200 million cycles
VS45 Softseal 4200 10 bar 20 million cycles
VS18, VS26, and VS45 Online ConfiguratorValve configuration, pricing, and CAD available online - for additional information go to www.norgren.com
» Product Configurator
Product Configurator VS18FCAXL+++++
Market: EN
Norgren’s valve island configurator program has been designed to make the selection of these products as easy and as straightforward
as possible. You can choose each component part and then specify the exact configuration you require through simple selection lists
You can get assistance with your selection by clicking on the list titles.
VS18Select family i
YES (ATEX conform)ATEX approved? i
Fieldbus 24V DCControl option i
DeviceNetProtocol i
VS18Connector Type i
VS18Plug and cable i
VS18No. of stations i
please select Outlet ports i
please selectEnd plate kit i
please selectPilot supply i
please selectSpool technology iProduct Configurator VS18FCAXL+++++
Reset
ded) /M12 4-pin, left hand
Not actual screen
ONLINE ANSWERS 24/7Simple manifold configurator providing price and availability.
Unique part number assigned to your manifold.
3D downloadable CAD files of your assembled manifold.
3D CAD available in15 different file formats.
VS SERIES SYSTEM VALVES VS SERIES SYSTEM VALVES
VS18Sectors Packaging, paint spraying, automotive, car wash,
assembly and robotics
Applications Blow offs, piloting, end of arm tooling, test equipment,
riveting, small bore, or single acting cylinders
PRODUCT SPECIFICATION
Flow 550 to 650 l/min
Ports 2&4 G1/8, 6 mm or 8 mm PIF
Fieldbus 4 to 16 stations
Multipole 2 to 20 stations
Voltage 24V d.c. or 115V a.c.
Expandable 1 to 4 stations
For further information, please refer to data sheet 5.4.159
VS26Sectors Packaging, material handling, automotive,
food processing
Applications Case erectors, tube bending, conveyor gate
controls, kicker cylinders, medium bore
cylinders, and high speed/flow requirements
PRODUCT SPECIFICATION
Flow 1000 to 1350 l/min
Ports 2&4 G1/4, 8 mm or 10 mm PIF
Fieldbus 4 to 16 stations
Multipole 2 to 20 stations
Voltage 24V d.c. or 115V a.c.
Expandable 1 to 4 stations
For further information, please refer to data sheet 5.4.160
NEWNNNNNNNNNNNNNNNNNNNNNEEEEEEEEEEEEEEEEEEEEEWWWWWWWWWWWWWWWWWWWWWNNNNNNNNNNNNNNNNNNNNNEEEEEEEEEEEEEEEEEEEEEWWWWWWWWWWWWWWWWWWWWWNNNNNNNNNNNNNNNNNNNNNEEEEEEEEEEEEEEEEEEEEWWWWWWWWWWWWWWWWWWWWWVS45
Sectors Wood processing, mining, aluminum manufacturing,
plastics manufacturing, paper conversion
Applications Clamping, platform lifting, door systems, large bore
cylinders and high cylinder speed/flow requirements.
PRODUCT SPECIFICATION
Flow 3200 to 4200 l/min
Ports 2&4 G3/8 or G1/2
Fieldbus 4 to 16 stations
Multipole 2 to 16 stations
Voltage 24V d.c. or 115V a.c.
Expandable 1 to 4 stations
For further information, please refer to data sheet 5.1.450VS18/VS26
VS SERIES SYSTEM VALVES VS SERIES SYSTEM VALVES
i
i
VS18
VS18
please select
Profibus DP
DeviceNet
CANopen
Interbus-S
AS - Interface - Single Slave
AS - Interface - Double Slave