VALVES - flowtec.at · Check Valves / Nozzle Check Valves .....44 Swing Check Valves ...
Transcript of VALVES - flowtec.at · Check Valves / Nozzle Check Valves .....44 Swing Check Valves ...
Overview of our product portfolio with product details
For any further questions, please feel free to contact our competent sales team. Our inside and outside sales team are always at your service!
VALVESDetailed Overview
www.flowtec.at
2www.flowtec.atwww.flowtec.at
Table of Contents
About Us ........................................................................................................................................................ 1
Flowtec - About Us.......................................................................................................................................1
Contact Details ..............................................................................................................................................1
Overview of our Services ..........................................................................................................................2
Butterfly Valves ............................................................................................................................................ 3
Butterfly Valves, Type GR ..........................................................................................................................3
Butterfly Valves, Type GRF ........................................................................................................................3
Butterfly Valves, Type OptiSeal (2-piece Body) ..................................................................................4
Butterfly Valves, Type CompoSeal (Composite Material) .................................................................4
Butterfly Valves, Type ECLI (DVGW - Water) .......................................................................................5
Butterfly Valves, Type CST, PTFE-, TFM-, UHMPE lined ....................................................................5
Shut-off and Control Butterfly Valves ....................................................................................................... 6
Double/Triple Eccentric High Performance Butterfly Valves ..........................................................6
Double Eccentric High Performance Butterfly Valves ......................................................................6
Triple Eccentric Butterfly Valves, Type 30000 ...................................................................................6
Safety Shut-off Valves according to EN 161 ............................................................................................. 7
Type AK/DVGW + AK/DVGW-SSK, Series 049 ......................................................................................7
Type AK/SSK, Series 054............................................................................................................................7
On/off and Control Butterfly Valves.......................................................................................................... 8
Butterfly Control Valves, Type LDKf / LDKe ........................................................................................8
On/off and Control Butterfly Valves, Type HRD / HRA .....................................................................8
On/off and Control Butterfly Valves, Type RD / RA ...........................................................................8
Ball Valves ..................................................................................................................................................... 9
3-piece Ball Valves, Type KH3A...............................................................................................................9
3-piece Ball Valves, Type KH88 ...............................................................................................................9
3-piece Ball Valves, Type FP3 ..................................................................................................................9
Flanged Ball Valves, Type EF 190 ........................................................................................................ 10
Compact Ball Valves ................................................................................................................................. 10
Ball Valves, Type SKV ............................................................................................................................... 10
Compact Ball Valves - One-piece Body, Type FA1/FC1 ................................................................. 11
Compact Ball Valves - One-piece Body, Type FB1 .......................................................................... 11
Compact Ball Valves - Two-piece Body, Type FA2/FC2 ................................................................. 11
Compact Ball Valves - Two-piece Body, Type FB2 .......................................................................... 12
3-Way Ball Valves, Type FT4/FZ4 and FT6/FZ6 .............................................................................. 12
Fully-Welded Ball Valves ........................................................................................................................ 13
„Top Entry“ Ball Segment Valves .......................................................................................................... 13
Cryogenic Ball Valves ............................................................................................................................... 14
Two- and Multi-Way-Ball Valves for Demanding Applications ................................................... 14
Lined Flanged Ball Valves, Type AKH2.2 ........................................................................................... 14
Lined Flanged Ball Valves with One-piece Ball/Stem, Type AKH8 ............................................ 15
www.flowtec.atwww.flowtec.at3
Table of Contents
Knife Gate Valves ....................................................................................................................................... 16
Knife Gate Valves, Type EB in Stainless Steel .................................................................................. 16
Knife Gate Valves, Type EB in Cast Iron ............................................................................................. 16
Pulp Knife Gate Valves, Type EK/EX ................................................................................................... 16
Knife Gate Valve as End-Of-Line Valve, Type ET ............................................................................. 17
High Pressure Knife Gate Valve, Type CW ......................................................................................... 17
Special Valve in Welded Construction, Type WS ............................................................................. 17
Pulp Knife Gate Valve, Type TK/TH/TL ............................................................................................... 17
Reject Valve, Type CR ............................................................................................................................... 18
Reject Valve, Type DT ............................................................................................................................... 18
Lined Knife Gate Valves, Type VG ........................................................................................................ 18
Gate Valves .................................................................................................................................................. 19
Metal Seated Wedge Gate Valves ......................................................................................................... 19
High Pressure Double Plate Wedge Gate Valves, Type Babcock ................................................ 19
Slide Valves ................................................................................................................................................. 19
Rubber Lined Wedge Gate Valves, Type Multamed / Multamed Premium (Gas) ................... 20
Piston Valves .............................................................................................................................................. 20
Shut-off Valves ........................................................................................................................................... 21
Shut-off and Control Valves ................................................................................................................... 21
Globe Valves with Bellow Seal .............................................................................................................. 21
Manual Slanting Seat Valves, Series MVMFL / VMFL ..................................................................... 22
Pneumatic Slanting Seat On/off Valves, Series VPFL / NPFL / MVPFL ..................................... 22
Pneumatic Globe Valves, Series VPFA / VPOO / SBS / MVPS ..................................................... 22
Carbon Steel Strainers ............................................................................................................................. 23
Y-Strainer, Series FFL ............................................................................................................................... 23
Lined Strainers, Type ASF ...................................................................................................................... 23
Ball Segment Valves ................................................................................................................................... 24
Ball Segment Valves, SOMAS, Centric/Eccentric .............................................................................. 24
Ball Segment Valves, SOMAS, Short Face-to-Face Dimension, Centric/Eccentric .................. 24
Ball Segment Valves, SOMAS, Medium and High Consistency Valves ....................................... 24
Control Valves ............................................................................................................................................. 25
Globe Valves in 2- and 3-Way Design ................................................................................................ 25
Micro Flow Valves ..................................................................................................................................... 25
Cryogenic Control Valves ........................................................................................................................ 25
Sanitary Valves / Valves for Food Processing, Series 600 ........................................................... 26
Dosing Valves, Series VD ........................................................................................................................ 26
Steam Desuperheaters ............................................................................................................................. 26
Check Valves ............................................................................................................................................... 27
Wafer Swing Check Valves, Type ZRK/ZRKF ..................................................................................... 27
Dual Plate Check Valves, Type 915 ..................................................................................................... 27
Tilting Disc Check Valves, Type RM ..................................................................................................... 27
Check Valves, Series VC/L ...................................................................................................................... 28
4www.flowtec.atwww.flowtec.at
Table of Contents
Lined Swing Check Valves, Type ARK2 ............................................................................................ 28
Disco Check Valves, Series 930 ............................................................................................................ 28
PTFE Lined Check Valves, Type DTEF ................................................................................................ 29
Lined Ball Check Valves, Type ARV2 .................................................................................................. 29
Check Valves ............................................................................................................................................... 29
Swing Check Valves .................................................................................................................................. 30
High Pressure Swing Check Valves ...................................................................................................... 30
Plug Valves .................................................................................................................................................. 31
Metal Plug Valves, Type G4E ................................................................................................................. 31
PFA Lined Plug Valves, Type T4E ......................................................................................................... 31
Ceramic Valves, Wear Protection, System Solutions ............................................................................ 32
Ceramic-Lined Modular Ball Valves „Cera Valve“ ............................................................................ 32
Sliding Disc Valves .................................................................................................................................... 33
Wear Protection of Pipes, Pipe Elbows, T/Y-Pieces, Orifice Plates, Reducers ........................ 33
Pinch Valves ................................................................................................................................................ 34
Pinch Valves with Manual Actuator, Type PVE ................................................................................ 34
Pinch Valves with Polyamide Body, Type PVEG .............................................................................. 34
Pinch Valves with Cast Steel Body, Type PVG .................................................................................. 34
Sleeve Types and Replacement Sleeves ............................................................................................. 34
Dampers and Flue Gas Valves ................................................................................................................... 35
Line Blind Valves ........................................................................................................................................ 36
Bulk Solid Valves ........................................................................................................................................ 37
Silo Outlet Valves, Type XC .................................................................................................................... 37
Swing Disc Valves, Type SD .................................................................................................................... 37
Swing Knife Gate Valves, Type SG ........................................................................................................ 37
Square Port Knife Gate Valves, Type BC ............................................................................................ 37
Bottom Outlet Valves ................................................................................................................................. 38
Bottom Outlet Valves ............................................................................................................................... 38
Bottom Outlet Valves, Type KVBW / KVBF ........................................................................................ 38
Bottom Outlet Valves ............................................................................................................................... 38
Sampling Valves ......................................................................................................................................... 39
Sampling Valves ......................................................................................................................................... 39
Sampling Valves, Type TP ....................................................................................................................... 39
Ball Sampling Systems, Type AtoPro ................................................................................................... 39
Safety Valves acc. to API-Standard 526 .................................................................................................. 40
Spring Loaded Pressure Relief Valves, Type JOS-E / JBS-E ....................................................... 40
Spring Loaded Pressure Relief Valves, Series 800 / 900 (900BP) ........................................... 40
Pilot Operated Pressure Relief Valves „Anderson Greenwood“ .................................................. 41
www.flowtec.atwww.flowtec.at5
Table of Contents
Valves for Water Applications: Industry ▪ Municipal ▪ Power Stations .............................................. 42
Butterfly Valves, Type ROCO Wave ...................................................................................................... 42
Butterfly Valves, Type EAK ................................................................................................................... 42
Rubber Lined Wedge Gate Valves, Type Multamed / Multamed Premium (Gas) ................... 42
Knife Gate Valves, Type ERU K1 .......................................................................................................... 43
Knife Gate Valves, Type EB in Stainless Steel .................................................................................. 43
Knife Gate Valves, Type EB in Cast Iron ............................................................................................. 43
Bonneted Gate Valves, Type BU ............................................................................................................ 44
WAGU® Penstocks and Gate Valves, Series WAGU® ......................................................................... 44
Check Valves / Nozzle Check Valves ................................................................................................... 44
Swing Check Valves .................................................................................................................................. 45
Swing Check Valves, Type ERK .............................................................................................................. 45
Ball Check Valves, Type KRV .................................................................................................................. 45
Needle Valves, Type RKV / RKS ............................................................................................................ 46
Fixed Cone Valves, Type CH ............................................................................................................ 46
Pressure Reducing Valves - Spring-Operated, Type DVF .............................................................. 46
Control Valves, Type RV .......................................................................................................................... 47
Pressure Sustaining Valves - Medium-Controlled, Type DHV4 ................................................... 47
Pressure Reducing Valves - Medium-Controlled, Type DVP4 ...................................................... 47
Air Valves, Type TWIN-AIR® ................................................................................................................... 48
Air Valves, Type BEV for Waste Water and Sewage ....................................................................... 48
Ball Valves, Type KH................................................................................................................................. 48
Diaphragm Valves, Type B/FD .............................................................................................................. 49
Dismantling Joints, Type PAS 10/20/30 ............................................................................................ 49
Wall Penstocks, Type MU ........................................................................................................................ 49
Channel Penstocks, Type CC ................................................................................................................... 50
Flap Gates, Type RC/RR .......................................................................................................................... 50
Pneumatic and Hydraulic Actuators ........................................................................................................ 51
Pneumatic Quarter-Turn Actuators, Type F89 .................................................................................. 51
Pneumatic and Hydraulic Actuators, Type Biffi / Morin ............................................................... 51
Electric Actuators ....................................................................................................................................... 52
Electric Actuators, Fail Safe, Type FS-FSQT, Schiebel ..................................................................... 52
Electric Actuators, Type CM, Schiebel ................................................................................................. 52
Electric Actuators, Type Auma .............................................................................................................. 52
Electric Part-Turn Actuators, Type J+J ............................................................................................... 52
Positioners .................................................................................................................................................. 53
Positioners ................................................................................................................................................... 53
Accessories .................................................................................................................................................. 54
Limit Switches, Limit Switch Boxes ..................................................................................................... 54
Solenoid Valves .......................................................................................................................................... 54
Pneumatic Accessories ............................................................................................................................. 54
Mounting Accessories ............................................................................................................................... 54
1www.flowtec.at
Peter Meyer & Co. AGIndustriearmaturen
Buchbergstrasse 20CH-8200 Schaffhausen
Telefon: +41 52 625 25 05 Fax: +41 52 624 64 38Postkonto: 82-1174-6
Bankverbindung: UBS AG, CH-8200 SchaffhausenKonto: 287-M0014430.0 / SWIFT: UBSWCHZH80A
IBAN: CH61 0028 7287 M001 4430 0
CHE-486.035.307 MWST
.
� � � �
� � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � �
� � � �
� � � � � � � � � � � � � � �
ATOMAC
www.flowtec.at
Flowtec - About Us
We are general agent and partner of leading inter-national manufacturers and specialists in the fields of industrial valves, and systems and components for the pulp and paper industry.
We have already been offering our international customers an extensive product range for many years. Our expertise is based on many years of experience, in-depth know-how and the possibility to offer solution-oriented concepts at a good price-service ratio.
Contact Details
AustriaA-8046 Graz, Stattegger Strasse 179 A-1230 Vienna, Eitnergasse 25
SlovakiaK.F. Palmu 28SK-034 01 Ružomberok
Czech RepublicDolní Třebonín 187CZ-382 01 Dolní Třebonín
T +43 316 697069-0 F +43 316 697069-9 M [email protected] www.flowtec.at
T +421 911 580470F +421 444 322710M [email protected]
T +420 602 252549F +43 316 697069-9M [email protected]
About Us
Flowtec - Industrial Valves
Our wide product range covers industrial valves manufactured by internationally leading companies for almost all applications and requests. We will be pleased to advise you and we will be your com-petent partner from the planning phase through product selection to the initial operation. Our employees have more than 30 years of experience within the pulp and paper industry, as well as the general industry.
With Flowtec you have an experienced partner by your side. We are specialized on handling projects of any size professionally and reliably for our customers.
Flowtec - Systems and Components
Our product range covers investment, replacement and wear and tear components for the pulp and paper production.
We work together with renowned and leading manufacturers within the pulp and paper industry.
Next to our wide product range, we will be pleased to support you further by conducting on-site audits of your systems and subse-quently presenting you improvement possibilities and methods to increase your efficiency.
Let us be the strong and reliable partner on your side.
www.flowtec.atwww.flowtec.at2
Overview of our Services
Flowtec operates mainly in Europe. The regions include Austria, with Flowtec‘s head office, and the Eastern European region.
Apart from Slovakia and the Czech Republic, Flowtec serves customers in Poland, Hungary, Romania, Slovenia, Croatia, Bosnia Herzegovina, Serbia, Bulgaria, etc. You can always count on our competent sales team in the respective country.
We would be glad to assist you! Please contact us.
Consulting and Training
▪ Advice and assistance from the planning phase through product selection to start-up
▪ Individual trainings at your site or at one of our offices in Graz or Vienna
Planning and Projects
▪ Professional partner for small and large sizedprojects
▪ Ensuring a smooth progress from the project start to the finalization of the project
Warehouse and Assembly
▪ Modernly equipped workshop allows customizedassembly and testing of the valves according to applicable standards and guidelines
▪ 2 extensive warehouses in Graz and Vienna▪ Delivery of standard valves within one workingday in Austria
Service and Maintenance
▪ Professional repair and maintenance work on time
About Us
Location: Flowtec Graz
Location: Flowtec Vienna
3www.flowtec.atwww.flowtec.at
Butterfly Valves, Type GR
DN (mm): 20 - 900 ▪ Replaceable seat▪ Rounded and polished disc edge
▪ Extended body neck▪ EPDM for higher temperatures
PN (bar): 10, 16
Temperature (°C): -28 up to +160
Body materials: GGG40
Seat materials: EPDM, NBR, NBR-DVGW Gas, FKM, EPDM & NBR food grade
Disc: Stainless steel 316 & 304, aluminium bronze, GGG nickel-plated, GGG epoxy, GGG nylon coated, nickel aluminium bronze, duplex, super duplex
Connections: Lug type, wafer
Approvals: ATEX, FDA, DVGW (Gas), SIL, TA Luft
Butterfly Valves, Type GRF
DN (mm): 600 - 1800(higher on request)
▪ Replaceable seat▪ Rounded and polished disc edge
▪ Extended body neck▪ EPDM for higher temperatures
PN (bar): 10 (as end-of-line: PN6)
Temperature (°C): -28 up to +160
Body materials: GGG40
Seat materials: EPDM, NBR, NBR-DVGW Gas, FKM, EPDM & NBR food grade
Disc: Stainless steel 316 & 304, aluminium bronze, GGG nickel-plated, GGG epoxy, GGG nylon coated, nickel aluminium bronze, duplex, super duplex
Connections: Double flanged acc. to EN 558 series 20, API 609
Approvals: ATEX, FDA, DVGW (Gas), SIL, TA Luft
Butterfly Valves
www.flowtec.atwww.flowtec.at4
Butterfly Valves, Type OptiSeal (2-piece Body)
DN (mm): 40 - 1000 ▪ OptiSeal butterfly valves with PTFE lined seat and PTFE covered disc/stem are ideally suited for applications where excellent chemical resistance and non-toxic properties are required
▪ 2-piece body▪ Rounded and polished disc edge
▪ Easily replaceable seat
PN (bar): 10, 16
Temperature (°C): -40 up to +160
Body materials: GG25, GGG40, GGG40.3, GSC25, 1.4408
Seat materials: EPDM (FDA), EPDM XP (FDA), EPDM PLUS (FDA), NBR, NBR PLUS, NBR white, FKM, PTFE (1 mm sintered on EPDM)
Disc: GGG Epoxy, 1.4408 (pickled, passivated, polished), composite, 1.4462, nickel aluminium bronze, EPDM covered, PTFE covered, titanium, Hastelloy®, Uranus®, etc.
Connections: Lug type, wafer
Approvals: ATEX, FDA, SIL, TA Luft
Butterfly Valves, Type CompoSeal (Composite Material)
DN (mm): 40 - 300 ▪ Pressure range up to PN16▪ Light weight▪ Excellent internal and external chemical corrosion resistance
PN (bar): 10, 16
Temperature (°C): -40 up to +150
Body materials: Composite XP 1600 / Composite XP 1620
Seat materials: EPDM, NBR, FKM
Disc: Composite XP 1620
Connections: Wafer
Zulassungen: FDA, SIL
Butterfly Valves
5www.flowtec.atwww.flowtec.at
Butterfly Valves, Type ECLI (DVGW - Water)
DN (mm): 32 - 1200 ▪ Inside and outside epoxy resin coating, blue color, layer thickness min. 150 µm
▪ Seamlessly coated▪ The valve disc is mounted centrally in the body in maintenance-free bushings (3 pcs)
▪ Completely tight seal in both flow directions
PN (bar): 10, 16
Temperature (°C): -40 up to +150
Body materials: GGG40 epoxy, coated
Disc: 1.4408
Seat materials: EPDM, NBR
Connections: Lug type, wafer
Approvals: DVGW (Water)
Butterfly Valves, Type CST, PTFE-, TFM-, UHMPE lined
DN (mm): 40 - 1050 ▪ To shut off and controlcorrosive and abrasive liquids or gases
▪ Design of pressure package ensures long-term zero leakage
▪ Ball-shaped disc, liner and pusher for smooth operation, longer lifetime and vacuum applications
▪ Special elastomer backups provide gas tightness
PN (bar): 10 (DN 40 - 600) 6 (DN 650 - 1050)
Temperature (°C): -20 up to +200
Body materials: GGG40.3 epoxy, carbon steel, stainless steel, thermoset
Disc: PFA, PFA cond., 1.4404, 1.4408, 1.4409, 1.4581, polished stainless steel, titanium, Hastelloy®
Seat materials: PTFE, TFM, UHMPE
Connections: Lug type, wafer
Approvals: ATEX, FDA, SIL, TA Luft
Butterfly Valves
www.flowtec.atwww.flowtec.at6
Double/Triple Eccentric High Performance Butterfly Valves
DN (mm): 80 - 1600 ▪ Special geometry▪ Solid stainless steel seat▪ Suitable for high flow rates and media containing solids and abrasive media
▪ Ideal shut-off and control valve
▪ Bi-directional sealing▪ Frictionless and torque minimized design
PN (bar) / ANSI: 10 - 100 / CL 150 - 600
Temperature (°C): -196 up to +600
Body materials: 1.4408, special materials
Seat materials: Solid stainless steel, R-PTFE reinforced
Connections: Wafer, double flanged, lug type
Options: Low-noise design, oil and gas applications, high temperature design, cryogenic design, combustion gas applications
Approvals: ATEX, TA Luft, Fire-safe, FDA, SIL
Double Eccentric High Performance Butterfly Valves
DN (mm): 50 - 900 ▪ Double eccentric high performance butterfly valve for high tempera-tures
▪ Efficient, bi-directional sealing for a wide spectrum of service conditions
PN (bar): 40 (DN 50 - 400) 25 (DN 450 - 600) 16 (DN 700 - 900)
Temperature (°C): -50 up to +400
Body materials: Carbon steel, stainless steel
Seat materials: PTFE, R-PTFE, stainless steel, carbon steel
Connections: Wafer, lug type
Options: End-of-line bi-directional feature
Approvals: TA Luft, Fire-safe, FDA, ATEX
Triple Eccentric Butterfly Valves, Type 30000
DN (mm): 80 - 2800 ▪ Shut-off and control butterfly valve for highest requirements in triple eccentric design
▪ Metal seated▪ Bi-directionally gas tight▪ Frictionless and torque minimized design
▪ Absolute leak tightness, even for high temperatu-res and/or high pressures
PN (bar) / ANSI: 10 - 160 / CL 150 - 1500
Temperature (°C): -245 up to +815
Body materials: Carbon steel, stainless steel, special materials
Seat materials: Metallic-lamella or full stainless steel, Stellite® seat
Connections: Lug type, wafer, double flanged, welded ends
Options: High temperature and cryogenic design, safety shut-off function, special face-to-face dimensions, 3-point interlocking
Approvals: ATEX, TA Luft, NACE, SIL, Fire-safe
Shut-off and Control Butterfly Valves
7www.flowtec.atwww.flowtec.at
Type AK/DVGW + AK/DVGW-SSK, Series 049
DN (mm): 50 - 400 ▪ Safety shut-off valve acc. to DIN EN 161, class A
▪ Safety shut-off valve for pipes to burner or multiple burners
▪ For gas lines, biogas plants, wastewater treat-ment plants, as double shut-off valve in furnace systems, etc.
PN (bar): 10
Body materials: Ducile iron, GGG40.3
Seat materials: NBR-DVGW, NBR, EPDM, FPM, FMQ, CSM, IIR
Closing time: < 1 sec.
Connections: Wafer
Approvals: EN 161, DVGW (Gas), SIL, ATEX
Type AK/SSK, Series 054
DN (mm): 500 - 1200 ▪ Safety shut-off valve for pipes to burner or multiple burners
▪ Max. working pressure: 2 bar
▪ Suitable for use in safetyrelated systems as a single safety related subsystem acc. to DIN EN IEC 61508 and DIN EN IEC 61511 for up to and including SIL3
PN (bar): 6
Body materials: Steel 1.0570
Seat materials: NBR-DVGW, FPM (vulcanized)
Closing times: DN 500 < 1 sec., DN 600 - 1200 < 2 sec.
Connections: Wafer
Approvals: EN 161, DVGW (Gas), SIL, ATEX
Safety Shut-off Valves according to EN 161
www.flowtec.atwww.flowtec.at8
Butterfly Control Valves, Type LDKf / LDKe
DN (mm): 80 - 1000 ▪ For ventilation systems▪ Building equipments, gas exhaust systems, combustion systems, quick closing valves, etc.
PN: < 500 mbar
Temperature (°C): up to +900
Body materials: Steel, stainless steel, special materials
Seat materials: Graphite, ceramic, elastomers
Connections: Wafer, flanged
On/off and Control Butterfly Valves, Type HRD / HRA
DN (mm): 50 - 1200 ▪ Industrial construction, oven, shipbuilding, engine test bench, gas exhaust system, steel plant, che-mical industry, etc.
▪ For on/off and control applications
▪ With manual, pneumatic or electric actuator
PN (bar) / ANSI: 6, 10 / CL 150
Temperature (°C): up to +900
Body materials: Cast iron, ductile iron, aluminium cast, stainless steel, special materials
Seat materials: Graphite, PTFE, elastomers
Connections: Wafer
On/off and Control Butterfly Valves, Type RD / RA
DN (mm): 32 - 500 ▪ Industrial construction, oven, shipbuilding, engine test bench, gas exhaust system, steel plant, che-mical industry, etc.
▪ For on/off and control applications
▪ With manual, pneumatic or electric actuator
PN (bar) / ANSI: 6, 10, 16 / CL 150
Temperature (°C): up to +550
Body materials: Cast iron, ductile iron, stainless steel, aluminium cast
Seat materials: Graphite
Connections: Wafer
On/off and Control Butterfly Valves
9www.flowtec.atwww.flowtec.at
3-piece Ball Valves, Type KH3A
DN (mm): 8 - 100 / 1/4“ - 4“ ▪ Pressure equalizing hole▪ 3-piece design▪ Full bore▪ ISO flange for direct mounting
▪ Blow out proof stem▪ Locking device as standard
PN (bar): 63
Body materials: 1.4408
Seat materials: PTFE, TFM 1600,R-PTFE metal mixture
Connections: Threaded, welded ends, long welded ends
Approvals: ATEX, TA Luft
3-piece Ball Valves, Type KH88
DN (mm): 8 - 50 ▪ Pressure equalizing hole▪ 3-piece design▪ Full bore▪ ISO flange for direct mounting
▪ Blow out proof stem▪ Locking device as standard
PN (bar): 100
Body materials: 1.4408
Seat materials: R-PTFE
Connections: Orbital butt weld ends in 1.4404
Approvals: ATEX, TA Luft
3-piece Ball Valves, Type FP3
DN (mm): 8 - 80 / 1/4“-4“ ▪ 3-piece design▪ Full bore▪ ISO flange for direct mounting
PN (bar): 20 - 100
Body materials: Stainless steel, Hastelloy®, titanium, Monel®
Seat materials: PTFE, R-PTFE (PTFE glass, PTFE metal mixture)
Connections: Threaded BSP/NPT, butt weld ends, socket weld ends, Tri-Clamp
Options: Oil & grease-free, cryogenic design, pressure equalizing hole, oval hand lever, cavity filling in PTFE
Approvals: ATEX, FDA, SIL3, TA Luft, Fire-safe
Ball Valves
www.flowtec.atwww.flowtec.at10
Flanged Ball Valves, Type EF 190
DN (mm): 15 - 300 ▪ 2-piece design▪ Full bore▪ ISO flange▪ Blow out proof stem▪ Locking device as standard
PN (bar) / ANSI: 16 - 40 / CL 150, 300
Body materials: 1.0619 (WCB), 1.4408 (CF8M)
Seat materials: PTFE, R-PTFE, UHMWP, PEEK, TFM 1600
Connections: Flanged
Approvals ATEX, TA Luft, Fire-safe, AD 2000 WO
Compact Ball Valves
DN (mm): 15 - 100 ▪ Pressure equalizing hole▪ Compact design▪ Full bore▪ ISO flange fordirect mounting
▪ Blow out proof stem
PN (bar): 16, 40
Temperature (°C): -20 up to +180
Body materials: 1.4408
Seat materials: PTFE
Connections: Flanged
Approvals: ATEX, TA Luft
Ball Valves, Type SKV
DN (mm): 25 - 500 (higher on request)
▪ Shut-off and control valve with high Kv-values
▪ Full bore▪ Easy to replace seats without removing the actuator
▪ Tightness acc. to ANSI Class V to VI
PN (bar) / ANSI: 25, 50 / CL 150, 300
Temperature (°C): -196 up to +550
Body materials: 1.4408, special materials
Seat materials: HiCo (Stellite®) or PTFE / stainless steel (PTFE 53)
Connections: Flanged
Approvals: ATEX, SIL, FDA
Ball Valves
11www.flowtec.atwww.flowtec.at
Compact Ball Valves - One-piece Body, Type FA1/FC1
DN (mm): 10 - 50 ▪ Forged▪ Compact design▪ One-piece mono-block design
▪ Full bore
PN (bar) / ANSI: 10 - 160 / CL 150 - 1500 (DN 50: up to PN 40 / CL 300)
Body materials: Carbon steel, stainless steel (316 / 316L), titanium, Hastelloy®, Monel®
Seat materials: PTFE, R-PTFE (PTFE glass, PTFE metal mixture), PEEK
Connections: Flanged
Options: Heating jacket, oil and grease-free, cryogenic design, pressure equalizing hole, oval hand lever, cavity filling in PTFE or metal
Approvals: ATEX, FDA, SIL3, TA Luft, Fire-safe
Compact Ball Valves - One-piece Body, Type FB1
DN (mm): 32 - 150 ▪ Cast stainless steel▪ Compact design▪ One-piece mono-block design
▪ Full bore
PN (bar) / ANSI: 10 - 40 / CL 150
Body materials: Stainless steel, titanium, Hastelloy®, Monel®
Seat materials: PTFE, R-PTFE (PTFE glass, PTFE metal mixture), PEEK
Connections: Flanges
Options: Heating jacket, oil and grease-free, cryogenic design, pressure equalizing hole, oval hand lever, cavity filling in PTFE or metal
Approvals: ATEX, FDA, SIL3, TA Luft, Fire-safe
Compact Ball Valves - Two-piece Body, Type FA2/FC2
DN (mm): 15 - 250 ▪ Forged▪ Compact design▪ Two-piece design▪ Full bore
PN (bar) / ANSI: 10 - 160 / CL 150 - 1500 (DN 250: up to PN 40 / CL 300)
Body materials: Carbon steel, stainless steel (316 / 316L), titani-um, Hastelloy®, Monel®
Seat materials: PTFE, R-PTFE (PTFE glass, PTFE metal mixture), PEEK
Connections: Flanged
Options: Heating jacket, oil and grease-free, cryogenic design, pressure equalizing hole, oval hand lever, cavity filling in PTFE or metal
Approvals: ATEX, FDA, SIL3, TA Luft, Fire-safe
Ball Valves
www.flowtec.atwww.flowtec.at12
Compact Ball Valves - Two-piece Body, Type FB2
DN (mm): 150 - 200 ▪ Cast stainless steel▪ Compact design▪ Two-piece design▪ Full bore
PN (bar) / ANSI: 10 - 40 / CL 150 - 300
Body materials: Stainless steel, titanium, Hastelloy®, Monel®
Seat materials: PTFE, R-PTFE (PTFE glass, PTFE metal mixture), PEEK
Connections: Flanged
Options: Heating jacket, oil and grease-free, cryogenic design, pressure equalizing hole, oval hand lever, cavity filling in PTFE or metal
Approvals: ATEX, FDA, SIL, TA Luft, Fire-safe
3-Way Ball Valves, Type FT4/FZ4 and FT6/FZ6
DN (mm): 15 - 150 ▪ „L“ or „T“ shaped▪ Type FT6/FZ6 for higher pressures
PN (bar) / ANSI: 10 - 40 / CL 150 - 300 (up to DN 50: PN 63)
Body materials: Carbon steel, stainless steel, titanium, Hastelloy®, Monel®
Seat materials: PTFE, R-PTFE (PTFE glass, PTFE metal mixture)
Connections: Threaded, block flanges
Options: Heating jacket, oil and grease-free, cryogenic design, pressure equalizing hole, oval hand lever, cavity filling in PTFE or metal
Approvals: ATEX, FDA, SIL, TA Luft, Fire-safe
Ball Valves
13www.flowtec.at
Peter Meyer & Co. AGIndustriearmaturen
Buchbergstrasse 20CH-8200 Schaffhausen
Telefon: +41 52 625 25 05 Fax: +41 52 624 64 38Postkonto: 82-1174-6
Bankverbindung: UBS AG, CH-8200 SchaffhausenKonto: 287-M0014430.0 / SWIFT: UBSWCHZH80A
IBAN: CH61 0028 7287 M001 4430 0
CHE-486.035.307 MWST
.
Peter Meyer & Co. AGIndustriearmaturen
Buchbergstrasse 20CH-8200 Schaffhausen
Telefon: +41 52 625 25 05 Fax: +41 52 624 64 38Postkonto: 82-1174-6
Bankverbindung: UBS AG, CH-8200 SchaffhausenKonto: 287-M0014430.0 / SWIFT: UBSWCHZH80A
IBAN: CH61 0028 7287 M001 4430 0
CHE-486.035.307 MWST
.
www.flowtec.at
Fully-Welded Ball Valves
DN (mm): 10 - 150 ▪ One-piece body design(with screwed insert)
▪ Laser welded, without body seal
▪ Full bore▪ Chambered seats▪ Integrated cavity pressure relief system
▪ Replaceable packing in depressurized, built-in condition
▪ Low cavity behind the seats
▪ Antistatic device▪ Minimum weight construction
PN (bar) / ANSI: (6)10 - 40 / CL 150 - 300
Body materials: 1.4404, 1.4435, Hastelloy®, titanium, tantalum (further materials on request)
Seat materials: TFM pure, PTFE pure, PTFE-glass, TFM-glass, BA 130, PEEK mod., TFM 50% VA, metal
Connections: All standard connections, further on customer request
Options: Double gland packing, heating jacket, flushing bore, Ra<0,8mµ in the through bore, locking device, special face-to-face dimensions
Approvals: ATEX, FDA, SIL, TA Luft, Fire-safe, SVGW
„Top Entry“ Ball Segment Valves
DN (mm): 25 - 65 ▪ Top Entry: Valve can be opened from the top
▪ Access to the interior parts without removing the valve from the pipeline
▪ Laser welded, one-piece body construction
PN (bar) / ANSI: (6)10 - 40 / CL 150 - 300
Body materials: 1.4404, Hastelloy®
Seat materials: TFM-glass
Connections: Flanged, welded ends
Options: Double gland packing, flushing bore, Ra<0,5mµ in the through bore, locking device
Approvals: ATEX, FDA, SIL3, TA Luft
Ball Valves
www.flowtec.at
Peter Meyer & Co. AGIndustriearmaturen
Buchbergstrasse 20CH-8200 Schaffhausen
Telefon: +41 52 625 25 05 Fax: +41 52 624 64 38Postkonto: 82-1174-6
Bankverbindung: UBS AG, CH-8200 SchaffhausenKonto: 287-M0014430.0 / SWIFT: UBSWCHZH80A
IBAN: CH61 0028 7287 M001 4430 0
CHE-486.035.307 MWST
.
� � � �
� � � � � � � � � � � � � � � � � � �
� � � � � � � � � � � � � � � � � � � � � �
� � � �
� � � � � � � � � � � � � � �
www.flowtec.at14
Cryogenic Ball Valves
DN (mm): 10 - 150 ▪ One-piece body design▪ Laser welded, without body seal
▪ Full bore▪ Blow out proof stem▪ For cryogenic process installations for very cold media such as liquefied gases CO2, N2, Ar, O2, natural gas (LNG)
▪ Spring loaded seat system for easy operation of the ball (down to -200°C)
PN (bar) / ANSI: (6)10 - 40 / CL 150 - 300
Temperature (°C): -200 up to +200
Body materials: 1.4404, 1.4435, Hastelloy®
Seat materials: TFM pure
Connections: Female threaded, male threaded, flanged, compact flange, welded ends
Options: Double gland packing, cryogenic extension, locking device, special face-to-face dimensions
Approvals: ATEX, SIL, TA Luft, Fire-safe, SVGW
Two- and Multi-Way-Ball Valves for Demanding Applications
DN (mm): 15 - 600 / 1/2“ - 24“ ▪ For special applications like abrasion, high tempe-high tempe-ratures and pressures
▪ Various materials▪ Various coatings▪ For high switching cycles
PN (bar) / ANSI: 10 - 420 / CL 150 - 2500
Temperature (°C): -196 up to +800
Body materials: Carbon steel, stainless steel, titanium, Hastelloy®, special materials
Seat materials: PTFE, graphite, PEEK, metal
Connections: Flanged, threaded, butt weld ends, socket weld ends
Options: Heating and cooling jacket, grid and lock units, special ball and seat coatings
Approvals: ATEX, FDA, SIL, TA Luft, Fire-safe, DVGW (Gas)
Lined Flanged Ball Valves, Type AKH2.2
DN (mm): 15 - 150 / 1/2“ - 4“ (higher on request)
▪ Self-adjusting packing gland
▪ Full bore▪ Leakage-free stem sealing
PN (bar) / ANSI: 16 / CL 150
Temperature (°C): -40 up to +200
Body materials: GGG40.3 PFA/FEP/PA conductive, stainless steel PFA/FEP/PA
Seat materials: PTFE
Connections: Flanged
Options: Pressure equalizing hole, C-ball, ceramic ball, V-ball
Approvals: ATEX, FDA, SIL2, TA Luft, DNV
Ball Valves
15www.flowtec.atwww.flowtec.at
Lined Flanged Ball Valves with One-piece Ball/Stem, Type AKH8
DN (mm): 15 - 100 ▪ Rigid connection between stem and ball
▪ No clearance between ball and stem
▪ Especially for high switching cycles in sticky, adhesive, and highly viscous media
PN (bar): 16
Temperature (°C): -40 up to +200
Body materials: GGG40.3 PFA, PFA conductive
Seat materials: PTFE, PTFE graphite
Connections: Flanged
Options: Pressure equalizing hole, C-ball, ceramic ball, V-ball
Approvals: ATEX, FDA, SIL2, TA Luft
Ball Valves
www.flowtec.atwww.flowtec.at16
Knife Gate Valves, Type EB in Stainless Steel
DN (mm): 50 - 1200 ▪ Bi-directional sealing▪ Full bore▪ Especially suitable for applications in the paper industry as well as in the waste water and chemical industry
PN (bar) / ANSI: up to 10 / CL 150
Body materials: 1.4408, special materials
Seat materials: EPDM, NBR, Viton®
Connections: Wafer
Approvals: ATEX
Knife Gate Valves, Type EB in Cast Iron
DN (mm): 50 - 1600 ▪ Especially suitable for water and waste water applications
▪ Bi-directional with ex-changeable profile seal
▪ Integrated flange seal
PN (bar) / ANSI: up to 10 / CL 150
Body materials: GG25, epoxy-coated
Seat materials: EPDM, NBR, Viton®
Connections: Wafer
Approvals: ATEX
Pulp Knife Gate Valves, Type EK/EX
DN (mm): 50 - 1200 ▪ One-piece body▪ Type EK: Seal ring flange-mounted from the outside
▪ Type EX: Seal ring integ-rated into the body
▪ Uni-directional sealing▪ For suspended solids < 5%, cellulose pulp, recycled paper pulp, water, waste water, bulk material, sludge, etc.
PN (bar) / ANSI: up to 10 / CL 150
Body materials: GG25, GGG40, 1.4408, special materials
Seat materials: PTFE, EPDM, NBR, Viton®, metal
Connections: Wafer
Options: Bonnet design, V-port for regulation, flush connections
Approvals: ATEX
Knife Gate Valves
17www.flowtec.atwww.flowtec.at
Knife Gate Valve as End-Of-Line Valve, Type ET
DN (mm): 50 - 900 ▪ Acc. to TAPPI Standard▪ Drillings acc. to DIN available
▪ Seal ring integrated into body
▪ Uni-directional sealing▪ For liquids containing solids and general use
PN (bar) / ANSI: up to 10 / CL 150
Body materials: 1.4408, cast iron
Seat materials: EPDM, Viton®, NBR, metal, PTFE
Connections: Lug type
Options: Bonnet design, V-port for regulation, flush connections
Approvals: ATEX
High Pressure Knife Gate Valve, Type CW
DN (mm): 100 - 1000 ▪ Applications: hazardous media and in high pressure applications
▪ With hood▪ Uni-directional dealing
PN (bar) / ANSI: up to 64 / CL 300
Body materials: Cast iron, 1.4408, duplex
Seat materials: EPDM, NBR, metal
Connections: Flanged
Options: Bonnet design
Approvals: ATEX
Special Valve in Welded Construction, Type WS
DN (mm): up to 3000 ▪ Special valve for high DN▪ Applications: hazardous media, high pressure applications, hydroelectric stations
▪ Welded construction
PN (bar) / ANSI: up to 25 / CL 150
Body materials: Steel, stainless steel
Seat materials: EPDM, metal
Connections: Wafer
Approvals: ATEX
Pulp Knife Gate Valve, Type TK/TH/TL
DN (mm): 50 - 1600 ▪ Through-going valve plate▪ For materials of high consistency up to 18% and liquids containing solids
▪ Bi-directional sealing▪ TK: Seal ring flange-mounted from the out-side, TL: Seal ring integra-TL: Seal ring integra-Seal ring integra-ted into body,
▪ TH: reinforced construc-tion up to 25 bar
PN (bar) / ANSI: up to 25 / CL 300
Body materials: GG25, 1.4408, special materials
Seat materials: Metal, PTFE, EPDM, NBR, Viton®, special materials
Connections: Wafer
Options: V-port for regulation, flush connections
Approvals: ATEX
Knife Gate Valves
www.flowtec.atwww.flowtec.at18
Reject Valve, Type CR
DN (mm): 100 - 600 ▪ Round inlet and larger rectangular outlet
▪ For rejects, dirt traps, especially in recycled paper processing
PN (bar) / ANSI: up to 10 / CL 150
Body materials: GG25, 1.4408
Seat materials: Polyurethane, metal
Connections: Wafer
Options: Transition pieces square/round
Approvals: ATEX
Reject Valve, Type DT
DN (mm): 100 - 800 ▪ Double plate knife gate valve with short opening and closing times
▪ For rejects, dirt traps, especially in recycled paper processing
▪ UHMW body liner
PN (bar) / ANSI: up to 10 / CL 150
Body materials: Steel, stainless steel
Seat materials: Metal
Connections: Wafer
Approvals: ATEX
Lined Knife Gate Valves, Type VG
DN (mm): 50 - 1000 ▪ For abrasive media▪ With elastomer sleeves▪ Applications: mining in-dustry, chemical industry
PN (bar) / ANSI: up to 10 / CL 150
Body materials: GGG40
Seat materials: NR, EPDM, NBR
Connections: Wafer
Options: Splash-guard
Approvals: ATEX
Knife Gate Valves
19www.flowtec.atwww.flowtec.at
Gate Valves
Metal Seated Wedge Gate Valves
DN (mm): 15 - 1200 / 1/2“ - 64“ ▪ External, rising stem▪ Non-flexible wedge(gate valves up to DN50)
▪ Flexible (split) wedge (gate valves DN50-1200)
PN (bar) / ANSI: 10 - 420 / CL 150 - 2500
Body materials: Various cast and forged materials as well as special materials
Connections: Flanged, welded ends
Design standards: DIN & ASME
Options: Automated (electric, pneumatic, hydraulic), heating jacket, bypass
Approvals: AD2000 A4, AD2000 HPO, TA Luft, ATEX
High Pressure Double Plate Wedge Gate Valves, Type Babcock
DN (mm): 50 - 600 / 2“ - 24“ ▪ Applications: Water, steam, gas, oil
▪ Parallel plates▪ Pressure sealing bonnet
PN (bar) / ANSI: 160 - 630 / CL 900 - 4500
Body materials: Various forged materials
Connections: Flanged, welded ends
Design standards: DIN & ASME
Options: Automated (electric, pneumatic, hydraulic), overpressure safety devices
Approvals AD2000 A4, AD2000 HPO, TA Luft, ATEX
Slide Valves
DN (mm): 50 - 1200 / 2“ - 50“ ▪ Through conduit-design in open position
▪ Dead space-free▪ No pressure loss▪ Low-noise
PN (bar) / ANSI: 2,5 - 50 / CL 10 - 150
Body materials: Various cast and forged materials as well as special materials
Connections: Flanged, welded ends
Options: Automated, limit switches, leakage monitoring, etc.
Approvals: ATEX, FDA, SIL, TA Luft, Fire-safe
www.flowtec.atwww.flowtec.at20
Rubber Lined Wedge Gate Valves, Type Multamed / Multamed Premium (Gas)
DN (mm): 40 - 300 ▪ Safe sealing against dust and humidity
▪ Continuous coating of the body for improved corrosi-on protection
▪ Reinforced stem nut (very high fracture resistance)
▪ Reliable seal, independent of the pressure exerted on the wedge by the medium
▪ Integrated sliding blocks made of special plastic
PN (bar): 10 - 16
Temperature (°C): up to +70
Body materials: GGG50 epoxy min. 250 μm, GGG50 Pro Enamel
Wedge rubber coating, sealings:
EPDM, NBR
Connections: Flanged, welded ends, socket connection
Face-to-face: EN 558, GR14, series 15
Options: Chain wheel, headstocks, adjustable mounting accessories for installation in the ground
Approvals: DVGW (Water), DVGW (Gas)
Piston Valves
DN (mm): 10 - 200 / 1/2“ - 2“ ▪ Sealed-off by two flexible valve rings
▪ Same tightness grade can be achieved across port and atmosphere due to identical valve rings
▪ No metallic contact▪ Large sealing surface▪ Cleaning effect of the piston
PN (bar): 16, 40, 63
Temperature (°C): -10 up to +400
Body materials: Cast iron, ductile iron, carbon steel, stainless steel
Connections: Flanges, threaded, socket weld ends, butt weld ends
Options: Regulating piston, heating jacket
Approvals: ATEX, TA Luft, Fire-safe
Gate Valves
21www.flowtec.atwww.flowtec.at
Shut-off Valves
Shut-off and Control Valves
DN (mm): 15 - 350 / 1/2“ - 20“ ▪ In straight pattern▪ Face-to-face length acc. to EN 558-1 GR 1 & GR 2
▪ Face-to-face length acc. to ANSI B16.10
PN (bar) / ANSI: 10 - 420 / CL 150 - 2500
Body materials: Various cast and forged materials as well as special materials
Connections: Flanged, welded ends
Design standards: DIN & ASME
Approvals: AD2000 A4, AD2000 HPO, TA Luft 2002/VDI 2440, ATEX
Globe Valves with Bellow Seal
DN (mm): 15 - 300 / 1/2“ - 16“ ▪ In straight pattern▪ Face-to-face length acc. to EN 558-1 GR 1 & GR 2
▪ Bellows sealing▪ Face-to-face length acc. to ANSI B16.10
PN (bar) / ANSI: 10 - 160 / CL 150 - 900
Body materials: Various cast and forged materials as well as special materials
Connections: Flanged, welded ends
Design standards: DIN & ASME
Options: Automated (electric, pneumatic, hydraulic), heating jacket, bypass
Approvals: AD2000 A4, AD2000 HPO, TA Luft 2002/VDI 2440, ATEX
www.flowtec.atwww.flowtec.at22
Manual Slanting Seat Valves, Series MVMFL / VMFL
DN (mm): 8 - 100 ▪ Applications: Textile dyeing and finishing plants, chemical plants, water-treating, alimentary, general industrial plants
PN (bar): 16 - 25
Temperature (°C): -30 up to +150
Body materials: 1.4408, 1.4409
Seat materials: PTFE, PTFE/CG
Connections: Flanged, female threaded, butt weld ends, socket weld ends
Options: Packing box and extended bonnet for steam max. +180°C
Approvals: ATEX
Pneumatic Slanting Seat On/off Valves, Series VPFL / NPFL / MVPFL
DN (mm): 8 - 200 ▪ Compact and solid construction
▪ Applications: Textile dyeing and finishing plants, chemical plants, water-treating, alimentary, general industrial plants
PN (bar): 10 - 25
Temperature (°C): -30 up to +200
Body materials: 1.4408, 1.4409
Connections: Flanged, butt weld ends, socket weld ends, female threaded
Options: Manual handwheel, limit switches, solenoid valves, electropneumatic converter signal 4-20 mA
Approvals: ATEX
Pneumatic Globe Valves, Series VPFA / VPOO / SBS / MVPS
DN (mm): 8 - 150 ▪ Compact and solid construction
▪ Applications: Textile dyeing and finishing plants, chemical plants, water-treating, alimentary, general industrial plants
PN (bar) / ANSI: 10 - 40 / CL 150 - 300
Temperature (°C): -196 up to +350
Body materials: GGG40, 1.0460, 1.4408, 1.4409
Connections: Flanged, welded ends
Options: Manual handwheel, limit switches, solenoid valves, electropneumatic converter signal 4-20 mA
Approvals: ATEX
Shut-off Valves
23www.flowtec.atwww.flowtec.at
Strainers
Carbon Steel Strainers
DN (mm): 15 - 300 / 1/2“ - 36“ ▪ Y-type▪ Face-to-face length acc. to EN 558-1 GR 1
▪ Face-to-face length acc. to ANSI B16.10
PN (bar) / ANSI: 10 - 160 / CL 150 - 2500
Body materials: Various cast and forged materials as well as special materials
Connections: Flanged, welded ends
Design standards: DIN & ASME
Approvals: AD2000 A4, AD2000 HPO, TA Luft, ATEX
Y-Strainer, Series FFL
DN (mm): 8 - 200 ▪ „Y“-filter in stainless steel▪ Applications: Textile dyeing and finishing plants, chemical plants, water-treating, alimentary, general industrial plants
PN (bar): 10 - 25
Temperature (°C): -30 up to +150
Body materials: Stainless steel 316L
Connections: Flanged, threaded, welded ends
Options: Various degrees of filtration, drain cap, temperatures of up to +200°C with special seal gaskets
Approvals: ATEX
Lined Strainers, Type ASF
DN (mm): 25 - 200 / 1“ - 8“ ▪ Corrosion resistant filter insert
▪ Easy exchange and cleaning of the clogged filter inserts - not necessary to remove the strainer from the line
PN (bar) / ANSI: 16 / CL 150
Temperature (°C): -40 up to +200
Body materials: GGG40.3-PFA, GGG40.3-FEP
Filter: PTFE/ETFE monofilamented filter screen
Connections: Flanged
Options: Various mesh sizes of filter screens or drillings available,permanent drain connections are available as an option
Approvals: ATEX, FDA, SIL2, TA Luft
www.flowtec.atwww.flowtec.at24
Ball Segment Valves
Ball Segment Valves, SOMAS, Centric/Eccentric
DN (mm): 25/2 - 700 ▪ Standard face-to-face dimensions
▪ Centric (type KVT) or eccentric (type KVX) design
▪ Low-Noise: noise reduc-Low-Noise: noise reduc-tion for high differential pressures
▪ V-groove (type KVMW, KVMF) for high consisten-cy pulp
▪ Particularly high Kv-values
PN (bar) / ANSI: 10 - 100 / CL 150 - 300
Temperature (°C): -196 up to +550
Body materials: 1.4408, Hastelloy® C, titanium, special materials
Seat materials: PTFE (10% carbon)PTFE 53 (50% 1.4435)HiCo (Stellite®)PEEK (high temperature resistant plastic)without seat (hard chromed cover plate)
Connections: Wafer, flanged
Designs: Wafer design - Type KVTW Flanged design - Type KVTF
Options: Manual override, safety interlock at the actuator
Approvals: ATEX, FDA, SIL
Ball Segment Valves, SOMAS, Short Face-to-Face Dimension, Centric/Eccentric
DN (mm): 25 - 250 - Wafer80 - 400 - Flanged
▪ Short face-to-face dimension
▪ Centric (Type KVT) or eccentric (Type KVX) design
▪ Low-Noise: noise reduc-Low-Noise: noise reduc-tion for high differential pressures
▪ V-groove (Type KVMW, KVMF) for high consisten-cy pulp
▪ Particularly high Kv-values
PN (bar) / ANSI: up to 25 / CL 150
Temperature (°C): -196 up to +550
Body materials: 1.4408, Hastelloy® C, titanium, special materials
Seat materials: PTFE (10% carbon)PTFE 53 (50% 1.4435)HiCo (Stellite®)PEEK (high temperature resistant plastic)without seat (hard chromed cover plate)
Options: Manual override, safety interlock at the actuator
Approvals: ATEX, FDA, SIL
Ball Segment Valves, SOMAS, Medium and High Consistency Valves
DN (mm): 100/150 - 350/400 ▪ Special design for high consistencies in the pulp and paper production
▪ Different nominal inlet and outlet sizes
▪ V-groove
PN (bar) / ANSI: 25 / CL 150
Body materials: 1.4408, CF8M
Seat materials: PTFE 53 (50% 1.4435)HiCo (Stellite®)
Connections: Flanged
25www.flowtec.atwww.flowtec.at
Control Valves
Globe Valves in 2- and 3-Way Design
DN (mm): 4 - 200 / 1/4“ - 8“ ▪ Regulation of liquids, gases, or steam
▪ Optimally adapted design depending on the individual application
PN (bar) / ANSI: 10 - 63 / CL 150, 300
Temperature (°C): -196 up to +350
Body materials: GGG40, 1.0619, 1.4408
Seat materials: Stainless steel, Stellite®, plastic layer
Connections: Flanged, threaded and welded ends
Options: Bellow seal, extended stem, cryogenic
Approvals: ATEX
Micro Flow Valves
DN: 15 - 50 / 1/4“ - 2“ ▪ Variety of combinations of materials, innervalve and other components)
▪ Applications:general industry, research, development, pilot plants
▪ Globe or angle design
PN (bar): up to 340 bar
Temperature (°C): -70 up to +530
Body materials: Stainless steel
Seat materials: Stainless steel, Stellite®, Hastelloy®, tantalum
Kvs range: 0,0000015 - 5,1
Connections: Flanged, threaded and special connections
Options: Bellow seal, cooling fins, extended stem, special packings
Approvals: ATEX, SIL, TA Luft, FDA
Cryogenic Control Valves
DN: 1/4“ - 1“ ▪ Suitable for regulation of liquids, gases, and steam
▪ Applications: general industry, research, development, pilot plants
▪ Particularly for regulation of media up to T ≤ -50°C
PN (bar): up to 170 bar
Temperature (°C): -270 up to +530
Body materials: Stainless steel
Seat materials: Stainless steel, Stellite®, Hastelloy®, tantalum
Kvs range: 0,0000015 - 51
Connections: Female threaded(NPT or BSP)
Approvals: ATEX, SIL, TA Luft, FDA
www.flowtec.atwww.flowtec.at26
Sanitary Valves / Valves for Food Processing, Series 600
DN (mm): 15 - 100 ▪ Suitable for regulation of liquids, gases, and steam in the biotechnological, pharmaceutical, and food industry
▪ Suitable for all applica-tions where deposits must be avoided
PN (bar): 10
Temperature (°C): -15 up to +160
Body materials: Stainless steel 1.4404
Seat materials: EPDM, metal
Cvs range: 0,45 - 160
Connections: Tri-Clamp, flanged, welded ends
Options: Polished surfaces, 3-way design
Approvals: ATEX, FDA
Dosing Valves, Series VD
DN (mm): 0,5 - 8 ▪ Dosing valves for various liquids (varnishes, sol-vents, dyes, inks)
▪ Applications: Textile dyeing and finishing plants, printing, general industrial plants
PN (bar): 16
Temperature (°C): -10 up to +100
Body materials: AISI 316 / AISI 316L (1.4408 / 1.4404)
Seat materials: Metal
Connections: Female threaded, male threaded, hose nipple
Options: O-ring Kalrez®
Approvals: ATEX
Steam Desuperheaters
DN steam (mm): 40 - 400 (depending on design)
▪ Wide range of models, sizes, and materials to sa-tisfy all the specifications of the power industry, pulp and paper industry, and process gas applica-tions
▪ Type ‚SPID‘ for small pipes in the power in-the power in-dustry, pulp and paper industry, and process gas applications
DN water (mm): 15 - 80 (depending on design)
PN (bar) / ANSI: 16 - 400 / CL 150 - 2500
Temperature (°C): -210 up to +620
Body materials: DIN & ASME welding materials
Connections: Flanged
Options: Variable nozzle type, Venturi type with up to 8 nozzles, fixed nozzles
Approvals: ATEX, SIL, TA Luft
Control Valves
27www.flowtec.atwww.flowtec.at
Check Valves
Wafer Swing Check Valves, Type ZRK/ZRKF
DN (mm): 32 - 600 ▪ Easy structure, short dimensions
▪ For direct mountingbetween DIN-flanges
PN (bar) / ANSI: 10, 16 / CL 150
Temperature (°C): -10 up to +300
Body materials: GGG40, steel, 1.4408, 1.4571, alubronze, duplex, Hastelloy®
Seat materials: NBR, EPDM, FPM, PTFE, metal
Connections: Mounting between flanges acc. to DIN EN1092-1
Dual Plate Check Valves, Type 915
DN (mm): 50 - 1000 ▪ Low opening pressure▪ Easy structure, short dimensions
▪ For direct mountingbetween DIN-flanges
PN (bar) / ANSI: 6 - 40 / CL 150
Temperature (°C): -10 up to +300
Body materials: GGG40, steel, 1.4408, alub-ronze, duplex, Hastelloy®
Seat materials: NBR, EPDM, FPM, PTFE, FPM/FKM, metal
Connections: Mounting between flanges acc. to DIN EN1092-1
Tilting Disc Check Valves, Type RM
DN (mm): 40 - 900 ▪ Robust design▪ Metal sealing▪ Eccentric design▪ Quick closing reaction due to oblique sealing
▪ Short face-to-face dimension
▪ Suitable as well for low differential pressures
▪ Applications: pulp and paper, wastewater treatment plants, food and beverage, etc.
PN (bar): 10 - 40
Temperature (°C): +400
Body materials: 1.4408, special materials
Seat materials: Metal
Connections: Wafer
Options: Auxiliary spring, counterweight, damper
www.flowtec.atwww.flowtec.at28
Check Valves, Series VC/L
DN (mm): 6 - 50 / 1/8“ - 2“ ▪ 2-way check valve▪ Bar material▪ Low pressure loss
PN (bar): 40
Temperature (°C): -20 up to +120
Body materials: 1.4404
Seat materials: FKM, NBR, EPDM, silicone
Opening pressure: 0,25 bar
Connections: Threaded
Lined Swing Check Valves, Type ARK2
DN (mm): 50 - 400 / 2“ - 16“ ▪ Particularly for highly corrosive media
▪ Installation in vertical and horizontal position
PN (bar) / ANSI: 10 - 16 (> DN 200: only PN 10) CL 150
Temperature (°C): -46 up to +204
Body materials: GGG40.3, PFA
Seat materials: GGG40.3, PFA
Valve disc: PFA
Connections: Mounting between flanges acc. to DIN EN1092-2/ ANSI CL B16.5
Approvals: ATEX, FDA, SIL
Disco Check Valves, Series 930
DN (mm): 15 - 300 ▪ Easy structure, short dimensions
▪ For direct mountingbetween DIN-flanges
PN (bar) / ANSI: 6 - 40 / CL 150
Temperature (°C): -10 up to +300
Body materials: 1.0619 / 1.4408
Seat materials: NBR, EPDM, FPM, PTFE, metal
Connections: Mounting between flanges acc. to DIN EN1092-1
Check Valves
29www.flowtec.atwww.flowtec.at
Check Valves
PTFE Lined Check Valves, Type DTEF
DN (mm): 15 - 150 ▪ Hastelloy® spring coated with PTFE/PFA tube and welded on the ends
PN (bar) / ANSI: 10 / CL 150
Body materials: PTFE + 25% glass, TFM/PTFE cond. FDA
Valve plate: PTFE + 25% glass, TFM/PTFE cond. FDA
Seat materials: Without sealing, Viton®, EPDM, NBR
Connections: Mounting between flanges acc. to Din EN 1092-1
Approvals: ATEX, FDA, SIL
Lined Ball Check Valves, Type ARV2
DN (mm): 15 - 200 / 1/2“ - 8“ ▪ Vertical and horizontal installation possible
▪ Ball: solid PTFE ▪ Full port design▪ Low opening pressure
PN (bar) / ANSI: 10 - 16(DN200: only PN10)CL 150
Temperature (°C): -46 up to +204
Body / seat materials:
GGG40.3/PFA, GGG40.3/FEP
Ball: PTFE
Connections: Flanged
Options: Lined 45° ball check valve (type ARL), lined check valve / sight glass-combination (type ARV/SG)
Approvals: ATEX, FDA, SIL2
Check Valves
DN (mm): 15 - 300 / 1/2“ - 12“ ▪ Face-to-face dimension acc. to EN 558-1 GR 1
▪ Face-to-face dimension acc. to ANSI B16.10
PN (bar) / ANSI: 10 - 420 / CL 150 - 2500
Body materials: Various cast and forged materials as well as special materials
Connections: Flanged, welded ends
Design standards: DIN & ASME
Approvals: AD2000 A4, AD2000 HPO, TA Luft, ATEX
www.flowtec.atwww.flowtec.at30
Swing Check Valves
DN (mm): 50 - 800 / 2“ - 40“ ▪ Inlet shaft▪ Freely swinging flap▪ Face-to-face dimension acc. to EN 558-1 GR 1
▪ Face-to-face dimension acc. to ANSI B16.10
PN (bar) / ANSI: 10 - 420 / CL 150 - 2500
Body materials: Various cast and forged materials as well as special materials
Connections: Flanged, welded ends
Design standards: DIN & ASME
Approvals: AD2000 A4, AD2000 HPO, TA Luft, ATEX
High Pressure Swing Check Valves
DN (mm): 50 - 600 / 2“ - 24“ ▪ High wear resistance▪ Bearing pin: wear-resistant and corrosion-resistant
▪ Pressure sealing bonnet▪ Applications: Water, steam, gas, oil
PN (bar) / ANSI: 160 - 630 / CL 900 - 4500
Body materials: Various forged materials
Connections: Flanged, welded ends
Design standards: DIN & ASME
Approvals: AD2000 A4, AD2000 HPO, TA Luft, ATEX
Check Valves
31www.flowtec.atwww.flowtec.at
Plug Valves
Metal Plug Valves, Type G4E
DN (mm): 15 - 300 / 1/2“ - 12“ ▪ Tighter shut-off than other rotary design valves
▪ For difficult chemical applications and for the isolation of pumps, tanks, reactors, and other critical equipment
PN (bar) / ANSI: 10, 40 CL 150 - 300 (type G4)
Temperature (°C): -46 up to +204
Body materials: GGG40.3, 1.0619, 1.4408, duplex, nickel, Inconel®, Monel®, titanium, zirconi-um
Plug: GGG40.3, 1.0619, 1.4408, duplex, nickel, Inconel®, Monel®, titanium, zirconi-um
Seat materials: PTFE, TM, UHMWPE, TFEG (glass)
Connections: Flanged
Options: Oil and grease-free, fire-safe, heating jacket, locking device, control plug
Approvals: ATEX, SIL2, TA Luft, Fire-safe
PFA Lined Plug Valves, Type T4E
DN (mm): 15 - 300 / 1/2“ - 12“ ▪ Suitable for extreme service and vacuum conditions
▪ Bubble-tight shut-off▪ No valve seat replacement necessary
PN (bar) / ANSI: 10 - 16 / CL 150 - 300
Temperature (°C): -46 up to +204
Body materials: GGG40.3 PFA, 1.0619 PFA, 1.4408 PFA
Plug: PFA lined
Diaphragm: TFM (PFA)
Connections: Flanged
Options: Additional stainless steel diaphragm
Approvals: ATEX, SIL2, TA Luft, FDA
www.flowtec.atwww.flowtec.at32
Ceramic-Lined Modular Ball Valves „Cera Valve“
Ball valves and sliding disc valves are getting highly wear-resistant due to the strategic use of ceramic components. These valves are mainly used for control and on/off applications for abrasive, corrosive, and solid-containing media like fly ash, lime milk, lime mud, kaolin, titanium dioxide, acids, alkaline solutions, pigments, etc.
Primary application fields are the chemical industry, pulp and paper industry, steel mills, power plants, waste incineration plants, pneumatic conveyor systems, etc.
Due to its modular design, „Cera Valve“ provides numerous different designs for many different applica-tion possibilities.
DN (mm): 10 - 300
PN (bar): up to 40 (higher pressures possible)
Temperature (°C): -30 up to +950
Compact or flanged design
Control and on/off valve
Flow rates from 1m³/h up to 2.800m³/h
Spring-loaded sealing system with trunnion mounted and floating ball, also hardened metal ball available
Used ceramics: Aluminium oxide, zirconium oxide, silicon carbide, silicon nitride
Approvals: TA Luft, SIL, ATEX
Valve type BR26 Cera is an on/off ball valve made of stainless steel, with ceramic seats and ceramic ball, for use in abrasive and corrosive applications, e.g. in pneumatic conveyor systems.
DN (mm): 15 - 100
PN (bar): 10 - 40
Temperature (°C): -10 up to +200
Seat materials: Silicon carbide
Ball: ZrO2, tungsten carbide
Body materials: 1.4408
Floating ball
Blow out proof stem
Spring loaded seats
Approvals: TA Luft, SIL, ATEX
Ceramic Valves, Wear Protection, System Solutions
33www.flowtec.at
Systemlösungen mit keramischen KomponentenSystem solutions with ceramic components
KERAMISCHER ROHRVERSCHLEISSSCHUTZCERAMIC PIPE WEAR PROTECTION
www.flowtec.at
Ceramic Valves, Wear Protection, System Solutions
Sliding Disc Valves
The sliding disc valve is dead space-free and gas tight and is particularly suitable for regulation of low volumes as well as dosing tasks.
On type SSC, the medium flows solely through ceramic (no metallic contact). For highly corrosive media, pharmaceutical products, products for microelectronics (pure silicon), etc. Suitable for control and on/off applications.
Key data:
DN (mm): 2 - 100
PN (bar): 40
Temperature (°C): up to +450 (higher on request)
Designs:
Design for chemical industry (type SSC)
Light-weight design (types SSL, SDL, SGL)
4-plate design (type SVC)
Wear Protection of Pipes, Pipe Elbows, T/Y-Pieces, Orifice Plates, Reducers
The pipe elbows made of one-piece, cast ceramic are nominal size conform. These pipe elbows are characterized by the use of premium ceramics, low weight, and step-free transition. The components can also be adapted to existing systems, without changing the pipelines.
DN (mm): 15 - 200
PN (bar): 6 - 16
Design: Steel jacket or GFK-coated, electrically conductive
Various types of connections(flanges, couplings, clamps, etc.)
Ceramic System Solutions
Multi-stage depressurizing (liquid - gas)
Application: coal gasification
„Blackwater“ - waste water
Desalination valves
www.flowtec.atwww.flowtec.at34
Pinch Valves with Manual Actuator, Type PVE
DN (mm): 25 - 1000 ▪ 100% tight▪ Full bore▪ Only the sleeve is in contact with the medium
▪ Self-cleaning▪ Excellent wear resistance
PN (bar): Vacuum - 100
Temperature (°C): -50 up to +160
Body materials: Cast steel, stainless steel, aluminium
Sleeve: SBRT or EPDM, further sleeves depending on the application, e.g. NBR, NR, PU, FPM, etc.
Connections: Flanged
Pinch Valves with Polyamide Body, Type PVEG
DN (mm): 50 - 150 ▪ 100% tight▪ Full bore▪ Only the sleeve is in contact with the medium
▪ Self-cleaning▪ Excellent wear resistance
PN (bar): up to 10
Temperature (°C): up to +70
Body materials: Polyamide mix
Sleeve: SBRT, EPDM
Connections: Flanged
Pinch Valves with Cast Steel Body, Type PVG
DN (mm): 50 - 250 ▪ 100% tight▪ Full bore▪ Only the sleeve is in contact with the medium
▪ Self-cleaning▪ Excellent wear resistance
PN (bar): up to 10
Temperature (°C): -50 up to +120
Body materials: Cast steel
Sleeve: SBRT, EPDM
Connections: Flanged
Sleeve Types and Replacement Sleeves
Depending on the media requirements, various sleeve materials are available like e.g. green liquor sleeves.
PU-Lined SensoMate Conical Vacuum Sleeve Sleeve Sleeve Sleeve
Pinch Valves
35www.flowtec.atwww.flowtec.at
Dampers and Flue Gas Valves
Dampers and flue gas valves (designed according to individual customer requirements) are available in following designs: butterfly valves like e.g. stack dampers, louver dampers, flare gas valves, knife gate valves, goggle dampers, poppet valves, butterfly valves with twin seals and sealing air fan, etc.
DN (mm): 25 - 7000
Working pressure (bar): max. 3
Temperature (°C): -40 up to +1200
Connections: Wafer, double flanged, and welded ends
Construction: round, square, rectangular
Design: casted or welded construction
Body materials: depending on application
Connection acc. to DIN24154 R2/R4, PN 2,5 / PN 6 / PN 10, CL 150
Seat materials: double eccentric soft sealing (Zero Leakage Class VI)
Options: quick opening/closing function, refractory linings
Approvals: tightness acc. to TA Luft (AED certificate), ATEX 94/9/CE certificate, SIL2, Halar® coating
www.flowtec.atwww.flowtec.at36
Line Blind Valves
DN (mm): 25 - 1200 / 1“ - 48“ ▪ Light weight▪ Only one operator required
▪ Safety improved due to locking device
PN (bar) / ANSI: 10 - 400 / CL 150 - 2500
Temperature (°C): -196 up to +535 (+800 high temperature design)
Body materials: Stainless steel, duplex Hastelloy®, Monel®, Incoloy®, Inconel®, titanium, etc.
Connections: Flanged, welded ends, threaded
Options: Automated, limit switches, special face-to-face dimensions, with draining valve
Approvals: ATEX
Line Blind Valves
37www.flowtec.atwww.flowtec.at
Bulk Solid Valves
Silo Outlet Valves, Type XC
DN (mm): 50 - 600 ▪ Special design of the body▪ Ideal for use as silo outlet valve
▪ For industrial bulk hand-ling service applications
▪ Uni-directional sealing
PN (bar) / ANSI: up to 10 / CL 150
Body materials: GG25, 1.4408
Seat materials: EPDM, PTFE, Viton®, silicone, metal
Connections: Wafer
Options: Bonnet design
Approvals: ATEX, FDA
Swing Disc Valves, Type SD
DN (mm): 80 - 300 / 3“ - 12“ ▪ For particularly high switching cycles
▪ For highly abrasivemedia, such as bottom ashes
▪ For pneumatic conveyorsystems
PN (bar): up to 3
Body materials: Cast iron, stainless steel
Seat materials: Soft seat, metal seat
Connections: Wafer
Approvals: ATEX
Swing Knife Gate Valves, Type SG
DN (mm): 80 - 400 / 3“ - 16“ ▪ For industrial bulk hand-ling service applications
▪ Bottom ashesPN (bar): up to 3
Body materials: Stainless steel, steel
Seat materials: Metal seat, soft seat
Connections: Flanged
Approvals: ATEX
Square Port Knife Gate Valves, Type BC
DN (mm): 150x150 - 1000x1000 ▪ Rectangular / square port low-pressure knife gate valve in welded construction
▪ For powdery media
PN (bar): 1 (higher on request)
Body materials: Carbon steel, stainless steel
Seat materials: EPDM, Viton®, silicone, metal
Connections: Flanged
Approvals: ATEX
www.flowtec.at
Peter Meyer & Co. AGIndustriearmaturen
Buchbergstrasse 20CH-8200 Schaffhausen
Telefon: +41 52 625 25 05 Fax: +41 52 624 64 38Postkonto: 82-1174-6
Bankverbindung: UBS AG, CH-8200 SchaffhausenKonto: 287-M0014430.0 / SWIFT: UBSWCHZH80A
IBAN: CH61 0028 7287 M001 4430 0
CHE-486.035.307 MWST
.
www.flowtec.at38
Bottom Outlet Valves
Bottom Outlet Valves
DN (mm): 20 - 400 ▪ Liquids with/without solids, gases, powders, powdery media, viscous and highly viscous media
PN (bar) / ANSI: 10 - 150 / CL 150 - 900
Body materials: Steel, stainless steel, titani-um, zirconium, Uranus® B6, Hastelloy®, Monel®, (super)duplex, carbon steel, Inco-loy® (Reg.), Inconel® (Reg.)
Actuators: Manual, pneumatic, electric, hydraulic
Options: Crust-breaking function, bellow sealed stem, flush connections, surface polished inside and/or outside (CIP/SIP), heating jacket, injection control, dead space free
Approvals: ATEX, FDA, SIL, TA Luft, Fire-safe
Bottom Outlet Valves, Type KVBW / KVBF
DN (mm): 80 - 400 ▪ Specially adaptedinlet flange
▪ Shaft is manufactured in one piece to guarantee a backlash-free transfer of the turning movement
PN (bar): 6
Temperature (°C): 200
Body materials: 1.4408
Seat materials: PTFE 53, Hostaflone® (FDA)
Connections: Flanged, wafer
Options: Flush connections, surface roughness Ra<0,8mµ
Approvals: ATEX, FDA
Bottom Outlet Valves
DN (mm): 40 - 150 ▪ Low cavity behind the seats
▪ Antistatic device▪ Full bore▪ One-piece body design▪ Laser welded, without body seal
PN (bar) / ANSI: (6)10 - 40 / CL 150 - 300
Temperature (°C): -60 up to +400
Body materials: 1.4404, Hastelloy®
Seat materials: PTFE, TFM glass, metal
Connections: Flanged, welded ends, threaded
Options: Double gland packing, heating jacket, flushing bore, integrated cavity pressure relief system, pressure equalizing hole
Approvals: ATEX, FDA, SIL, TA Luft, SVGW, Fire-safe
39www.flowtec.atwww.flowtec.at
Sampling Valves
DN (mm): 10 - 200 ▪ Liquids, solid-containing liquids, gases, powders, powdery media, viscous and highly viscous media
PN (bar): 10 - 100
Body materials: Steel, stainless steel, titani-um, zirconium, Uranus® B6, Hastelloy®, Monel®, (super)duplex, carbon steel, Inco-loy® (Reg.), Inconel® (Reg.)
Actuators: Manual, pneumatic, electric, hydraulic
Options: Crust-breaking function, bellow sealed stem, flush connections, surface polished inside and/or outside (CIP/SIP), fire-safe design, heating jacket, injection control, dead space free
Approvals: ATEX, FDA, SIL, TA Luft, Fire-safe
Sampling Valves, Type TP
DN (mm): 25/40 ▪ DN 25 for consistency of 0-5%
▪ DN 40 for consistency of> 3-5% in case of high reject content or long fiber pulp (without flush connection)
▪ DN 40 for consistency of> 5-8% (with flush connection)
PN (bar): 10
Temperature (°C): 120
Body materials: 1.4408
Seat materials: Soft seat (O-ring NBR),others on request
Connections: Welding connection, screw connection
Options: Pneumatic actuator, flush connections
Approvals: ATEX
Ball Sampling Systems, Type AtoPro
DN (mm): 25 - 80 ▪ For quick sampling▪ High security sampling with a stainless steel protecting case in combination with integrated detoxification filters
PN (bar): 10, 16
Temperature (°C): up to +180
Body materials: GGG40.3 - PFA, GGG40.3 - PFA-conductive,1.4408
Seat materials: PTFE
Connections: Flanged
Options: Lined or stainless steel design, heating jacket, protection case
Approvals: ATEX, SIL2, FDA
Sampling Valves
www.flowtec.atwww.flowtec.at40
Safety Valves acc. to API-Standard 526
Spring Loaded Pressure Relief Valves, Type JOS-E / JBS-E
DN (inch): 1“ D 2“ - 8“ T2 10“(higher on request)
▪ Acc. to API-526 standard ▪ For air, gas, steam, vapor, liquids, and two-phase applications
▪ Exceptionally rugged, standardized design
▪ Perfectly suitable for applications in process and power industries
ANSI: CL 150 - 2500
Temperature (°C): -268 up to +538
Body materials: ASME SA216/217, SA351-CF8M, duplex, Hastelloy®, Monel®, titanium, Inconel®
Seat materials: Metal-to-metal, Buna-N, Viton®, silicone, Kalrez®, TFE, EPR
Connections: Flanged
Options: Materials and certifications for sour gas application NACE, special Teflon® (FEP) bellows coating, BlockBody design, steam jacketed bodies, supplementary loading
Approvals: ASME Boiler and Pressure Vessel Code, section VIII, and API-Norms 526 and 527, NACE
Spring Loaded Pressure Relief Valves, Series 800 / 900 (900BP)
DN (inch): 1/2“ - 2 1/2“ ▪ Acc. to API-526 standard ▪ Series 800 with adjusta-ble blowdown
▪ Serie 900 OMNI-TRIM® with fixed blowdown
▪ For air, gases, steam, liquids, thermal relief
ANSI: CL 150 - 2500
Temperature (°C): -268 up to +399
Body materials: ASME SA216/217, SA351-CF8M, duplex, Hastelloy®, Monel®, titanium, Inconel®
Seat materials: Metal-to-metal, Buna-N, Viton®, silicone, Kalrez®, TFE, EPR
Connections: NPT threaded, socket weld ends, butt weld ends
Options: Materials and certifications for sour gas application NACE, BlockBody design, series BP for liquid applications involving variable back pressure
Approvals: ASME Boiler and Pressure Vessel Code, section VIII and API-Norms 526 and 527, NACE
41www.flowtec.atwww.flowtec.at
Safety Valves gem. API-Standard 526
Pilot Operated Pressure Relief Valves „Anderson Greenwood“
DN (inch): 1“ x 2“ up to 20“ x 24“ ▪ Wide range of products and technologies
▪ Decades of experience in the field of pressure relief
▪ Oil and gas production and processing, petro-petro-chemical, and chemical industry
▪ For gases, liquids, steam, and mixed phase services
▪ Acc. to API-526 standard
ANSI: CL 150 - 2500
Temperature (°C): -268 up to +538
Body materials: Aluminium, carbon steel, stainless steel, special materials
Seat materials: Metal-to-metal, various soft sealings
Connections: Flanged
Approvals: ASME Boiler and Pressure Vessel Code, section VIII and API-Norms 526 and 527, ASME section stamp
www.flowtec.atwww.flowtec.at42
Valves for Water Applications Industry ▪ Municipal ▪ Power Stations
Butterfly Valves, Type ROCO Wave
DN (mm): 150 - 1600 ▪ Double eccentric butterfly valve with flow-optimized “wave“ design
▪ Minimized pressure losses▪ High energy efficiency▪ Polygon connection of shaft and disc
▪ Uninterrupted corrosion protection
▪ Slider crank gearbox
PN (bar): 10 - 40
Temperature (°C): max. 60
Body materials: GGG40 epoxy coated, GGG40 Pro Enamel coated
Seat ring: High quality alloy welding, enamelled
Sealings: EPDM, NBR, Viton®
Connections: Flanged
Face-to-face: EN 558, GR 14 (DIN3202 F4)
Options: EPC (Epoxy-Polymer-Ceramic) for critical media, ATEX coated, rubbered coating
Approvals: DVGW (Water), ATEX
Butterfly Valves, Type EAK
DN (mm): 700 - 3600 ▪ Variants with weightloa-ded hydraulic actuator available
▪ Spindle gear
PN (bar): 6 - 40
Temperature (°C): max. 60
Body materials: GGG40 epoxy coated
Seat ring: Austenitic Cr-Ni steel, enamelled
Sealings: EPDM, NBR, Viton®
Connections: Flanged
Face-to-face: EN 558, GR 14 (DIN3202 F4)
Options: EPC (Epoxy-Polymer-Ceramic) for critical media, ATEX coated, rubbered coating
Approvals: Certificate for drinking water, ATEX
Rubber Lined Wedge Gate Valves, Type Multamed / Multamed Premium (Gas)
DN (mm): 40 - 300 ▪ Safe sealing against dust and humidity
▪ Continuous coating of the body for improved corrosi-on protection
▪ Reinforced stem nut (very high fracture resistance)
▪ Reliable seal, independent of the pressure exerted on the wedge by the medium
▪ Integrated sliding blocks made of special plastic
PN (bar): 10 - 16
Temperature (°C): up to +70
Body materials: GGG50 epoxy min. 250 μm, GGG50 Pro Enamel
Wedge rubber coating, sealings: EPDM, NBR
Connections: Flanged, welded ends, socket connection
Face-to-face: EN 558, GR14, series 15
Options: Chain wheel, headstocks, adjustable mounting accessories for installation in the ground
Approvals: DVGW (Water), DVGW (Gas)
43www.flowtec.atwww.flowtec.at
Knife Gate Valves, Type ERU K1
DN (mm): 50 - 600 ▪ As wafer-type or end-of-line valve
▪ For water, sewage▪ Industries: Sewage treatment plants, power plant industry, steel industry
PN (bar): 4 - 10
Temperature (°C): max. 60
Body materials: GG25 epoxy coated
Valve plate: 1.4571
Sealings: EPDM, NBR
Connections: Can be used as wafer- type or end-of-line valve without counter flange up to 2 bar
Knife Gate Valves, Type EB in Stainless Steel
DN (mm): 50 - 1200 ▪ Bi-directional sealing▪ Full bore▪ Especially suitable for applications in the paper industry as well as in the waste water and chemical industry
PN (bar) / ANSI: up to 10 / CL 150
Body materials: 1.4408, special materials
Seat materials: EPDM, NBR, Viton®
Connections: Wafer
Approvals: ATEX
Knife Gate Valves, Type EB in Cast Iron
DN (mm): 50 - 1600 ▪ Especially suitable for water and waste water applications
▪ Bi-directional with ex-changeble profile seal
▪ Integrated flange seal
PN (bar) / ANSI: up to 10 / CL 150
Body materials: GG25, epoxy-coated
Seat materials: EPDM, NBR, Viton®
Connections: Wafer
Approvals: ATEX
Valves for Water Applications Industry ▪ Municipal ▪ Power Stations
www.flowtec.atwww.flowtec.at44
Bonneted Gate Valves, Type BU
DN (mm): 800x800 - 2000x2500 ▪ Rectangular geometry including by-pass for pressure equalizing
▪ Whole design according to customer requirements
▪ Air vent system
PN: up to 150 mWs
Body materials: Steel, SS304
Seat materials: Bronze
Connections: According to customer requirements
WAGU® Penstocks and Gate Valves, Series WAGU®
DN (mm): 150 - 3000(higher on request)square/rectangular
▪ Penstocks used for iso-lating and regulating open channels, inlets and outlets of canals, sewers, pits, basins, and pipelines
▪ Ideally suited for use in sewage engineering, the water industry, and flood protection
PN (bar): up to 2
Body materials: Hot-dip zinc-coated steel, stainless steel, aluminium alloys
Connections: For wall bolting, grouting, or as flange type
Check Valves / Nozzle Check Valves
DN (mm): 80 - 900 ▪ Particularly economical due to optimized stream-lined design
▪ Short closing stroke and thus minimized pressure surges
PN (bar): 10 - 40
Body materials: EN-JS1025, EN-JS1030
Coatings: Epoxy, enamel
Connections: Flanged
Valves for Water Applications Industry ▪ Municipal ▪ Power Stations
45www.flowtec.atwww.flowtec.at
Valves for Water Applications Industry ▪ Municipal ▪ Power Stations
Swing Check Valves
DN (mm): 50 - 300 ▪ Exterior shaft and intake strainer
▪ For water and sewage in plants, buildings, and valve chambers
▪ Opening angle 93%, for an exceptionally low zeta value
▪ Self-centering of the valve disc
PN (bar): 10 - 16
Temperature (°C): max. +60
Body materials: GGG40-epoxy
Sealings: NBR
Connections: Flanged
Face-to-face: DIN EN 558-1, GR 48 (F6)
Options: With/without weight-loaded lever
Swing Check Valves, Type ERK
DN (mm): 150 - 1400 ▪ Low-weight short face-to-face dimension
▪ Double-offset free-swin-ging and streamlined disc
PN (bar): 10 - 40
Temperature (°C): max. +60
Body materials: GGG40-epoxy coated
Seat ring: Stainless steel
Sealings: EPDM, NBR, Viton®
Connections: Flanged
Face-to-face: DIN EN 558, GR 14
Options: Epoxy-Polymer-Ceramic (EPC), hydraulic damping device
Approvals: DVGW (Water)
Ball Check Valves, Type KRV
DN (mm): 50 - 600 ▪ Especially suitable for waste water posing a high risk of clogging
PN (bar): 10, 16
Body materials: GGG40 coated
Ball: Steel/aluminium,NBR/EPDM rubberized
Connections: Flanged
Face-to-face: DIN EN 558-1, GR 48
Options: Floating ball
www.flowtec.atwww.flowtec.at46
Needle Valves, Type RKV / RKS
DN (mm): 100 - 2000 ▪ For safe and reliable reduction and control of pressure heads and flow rates
▪ One-piece design▪ Optimized flow perfor-mance and minimum pressure losses when fully opened
PN (bar): 10 - 160
Temperature (°C): max. +60
Body materials: GGG50-epoxy & carbon steel-epoxy coated, stain-less steel on requestSeat ring and control inserts made from stainless steel
Construction: Vaned ring or slotted cylinder design
Connections: Flanged
Face-to-face: DIN EN 558, GR 15
Options: EPC (Epoxy-Polymer-Ceramic) for critical media
Approvals: ATEX
Fixed Cone Valves, Type CH
DN (mm): 400 - 2000 ▪ Designed to control the amount of water downstream
▪ Wide range of sizes and special materials in order to match the require-ments of the specific application
PN (bar) / ANSI: According to requirements
Body materials: Stainless steel
Actuators: Manual, electric, hydraulic
Connections: According to requirements
Pressure Reducing Valves - Spring-Operated, Type DVF
DN (mm): 50 - 150 ▪ For converting a higher fluctuating admission pressure into a lower and constant back pressure in water treatment and distribution installations
PN (bar): 10 - 40
Temperature (°C): max. +60
Body materials: GGG40-epoxy coatedBody seat and guide made of alu-bronze
Pressure range (downstream):
1,5 up to 6 bar or 5 and 12 bar
Connections: Flanged
Valves for Water Applications Industry ▪ Municipal ▪ Power Stations
47www.flowtec.atwww.flowtec.at
Valves for Water Applications Industry ▪ Municipal ▪ Power Stations
Control Valves, Type RV
DN (mm): 50 - 150 ▪ For throttling and regulation in water treatment and distribu-tion installations as well as hydroelectric power plants
PN (bar): 16 - 40
Temperature (°C): max. +60
Body materials: GGG50 epoxy coated
Piston and slotted bushing: 1.4031
Sealings: PTFE, NBR
Connections: Flanged
Pressure Sustaining Valves - Medium-Controlled, Type DHV4
DN (mm): 50 - 600 ▪ Stable back pressure in supply networks and maximum flow perfor-mance
▪ For medium-controlled pressure reduction for drinking water in water supply and distribution installations
▪ Precise and stable regulation
PN (bar): 10 - 25
Temperature (°C): max. +60
Body materials: GGG50 epoxy coated
Sealings: EPDM
Upstream pressure range (bar): 0,2 - 2 / 1 - 20
Connections: Flanged
Pressure Reducing Valves - Medium-Controlled, Type DVP4
DN (mm): 50 - 600 ▪ Precise and stable regulation
▪ Low pressure loss with fully open valve
▪ Controlled by flow medium
▪ Clear position indicator: 2 pressure gauges and shut-off valves
PN (bar): 10 - 25
Temperature (°C): max. +60
Body materials: GGG50 epoxy coated
Sealings: EPDM
Downstream pres-sure range (bar): 0,2 - 2 / 1 - 20
Connections: Flanged
www.flowtec.atwww.flowtec.at48
Air Valves, Type TWIN-AIR®
DN (mm): 50 - 200 ▪ Automatic air admissi-on and release of water pipelines
▪ Compact design with low weight
▪ Large cross-section with maximum air admission and release rates
▪ Automatic operational air release via lever with patented self-cleaning
PN (bar): 10 - 40
Temperature (°C): max. +60
Body materials: GGG40 inside and outside epoxy coated, inside ena-melled, EPC inside
Sealings: EPDM
Connections: Flanged
Options: Only air admission, only air release
Air Valves, Type BEV for Waste Water and Sewage
DN (mm): 80 - 200 ▪ Special construction for waste water and sewage
▪ Simple and robust design▪ Air quantity can be adjus-ted precisely
▪ Large free space between float and inner body wall
▪ No blockages due to suspended particles and foreign bodies
PN (bar): 10 - 16
Temperature (°C): max. +60
Body materials: GGG40 epoxy
Sealings: NBR
Connections: Flanged
Options: Only air admission, only air release, flush connection
Ball Valves, Type KH
DN (mm): 80 - 1200 ▪ For diverse applications with water and sewage, particularly at high flow rates (up to max. 15 m/s) and high pressure stages up to PN40
PN (bar): 10 - 40
Temperature (°C): max. +60
Body materials: GGG40 epoxy, GGG50 epoxy, 1.0619 epoxy
Connections: Flanged
Options: With inspection opening, with inspection seal, 3-way ball valve, special coatings
Valves for Water Applications Industry ▪ Municipal ▪ Power Stations
49www.flowtec.atwww.flowtec.at
Diaphragm Valves, Type B/FD
DN (mm): 15 - 300 ▪ With/without rubber coating and different qualities of diaphragm for different media
▪ Hood and pressure piece are not in contact with the medium
▪ Lift restriction as stan-dard
PN (bar): 4 - 10
Temperature (°C): -10 up to +120
Body materials: GG25 or GGG40 Halar® ECTFE coating
Connections: Flanged, threaded (3/8“ - 2“)
Diaphragm: PTFE
Options: Rubber-coated with full bore (Type FD), with PTFE lining
Dismantling Joints, Type PAS 10/20/30
DN (mm): 50 - 1600 ▪ Balancing face-to-face dimensions
▪ For the easy remove of valves
▪ With two flanges and one pressure ring
PN (bar): 10 - 40
Temperature (°C): max. +60
Body materials: Steel-epoxy coated
Sealings: EPDM
Coatings: Flanged
Wall Penstocks, Type MU
DN (mm): 150x150 - 4000x4000 ▪ Square or rectangular port
▪ 4 sided sealing▪ Used for on/off or con-trol applications in wells, tanks, pipe outlets, etc.
PN (mWs): up to 1000x1000 10 mWs, above 6 mWs
Temperature (°C): max. +100
Frame and slide: 1.4301, 1.4404, 1.4571, duplex
Sealings: EPDM
Connections: Flanged, concreted
Options: Larger sizes, mechanical position indicators, actuator manual overrides, locking devices
Approvals: ATEX
Valves for Water Applications Industry ▪ Municipal ▪ Power Stations
www.flowtec.atwww.flowtec.at50
Valves for Water Applications Industry ▪ Municipal ▪ Power Stations
Channel Penstocks, Type CC
DN (mm): 150x150 - 2000x2000 ▪ Channel gate▪ 3 sided sealingPN: Channel height
Temperature (°C): max. +100
Frame and slide: 1.4301, 1.4404, 1.4571, duplex
Sealings: EPDM
Connections: Flanged, concreted
Options: Larger sizes, mechanical position indicators, actuator manual overrides, locking devices
Approvals: ATEX
Flap Gates, Type RC/RR
DN (mm): 150x150 - 1400x1400 ▪ Square, rectangular, or round flap gate
▪ Type RR: round, Type RC: square
▪ Wall mounted or flanged▪ Commonly installed at the end of a line as a check valve
PN: 5 mWS
Temperature (°C): up to 100
Frame and slide: 1.4301, 1.4404, 1.4571, duplex
Sealings: EPDM
Connections: Flanged
Options: Larger sizes on request
Approvals: ATEX
51www.flowtec.atwww.flowtec.at
Pneumatic Quarter-Turn Actuators, Type F89
Body materials: Aluminium ESPC coated
▪ Anodized aluminium body with electrostatic powder coating (ESPC)
▪ Standard mounted travel stops for valve position adjustment in open and close position (+/- 5° at each end)
▪ Pre-compressed spring design and anti-blowout drive pinion
Torque range double acting: 11 - 4173 Nm
Torque range spring return: 6 - 1663 Nm
Air supply pressure: max. 10 bar
Temperature range: -20°C up to +80°C
Low temperature version: -40°C up to +65°C
High temperature version: -15°C up to +150°C
Pneumatic and Hydraulic Actuators, Type Biffi / Morin
Torques: up to 750.000 Nm ▪ Total enclosed, wea-therproof carbon steel housing provides maxi-mum strength, internal coating protects against corrosion
Ambient tempe-rature (°C):
-28 up to +100Optional: -54 up to +150
Pneumatic and Hydraulic Actuators
www.flowtec.atwww.flowtec.at52
Electric Actuators, Fail Safe, Type FS-FSQT, Schiebel
Voltage: 24 V - 400 V AC/DC ▪ For on/off and control function
▪ Easy to change positioning time
▪ Modulating operation possible due to decoupled fail-safe unit
Positioning time Fail Safe:
1 - 10 sec.
90° turn actuator FSQT: up to max. 32.000 Nm
Linear actuator FS: up to max. 190 kN
Options: ATEX version, analog position feedback signal 4-20 mA, bus connection, hand wheel
Electric Actuators, Type CM, Schiebel
Voltage: 24 V - 400 V AC/DC (special voltages on request)
▪ For on/off and control functions
▪ Adjustable speed and positioning time
▪ Compact, space-saving construction
90° turn actuator FSQT:
up to max. 15.000 Nm (higher for AB series)
Rotary actuator: up to max. 500 Nm (higher for AB series)
Linear actuator: up to max. 35 kN (higher for AB series)
Options: Fail-safe, ATEX version, analog position feedback signal 4-20 mA, bus connection
Electric Actuators, Type Auma
Voltage: 24 V - 690 V AC/DC ▪ For on/off and control functions
▪ Standardized control technology for DCS
90° turn actuator: up to max. 675.000 Nm
Rotary actuator: up to max. 32.000 Nm
Linear actuator: up to max. 270 kN
Options: ATEX version, analog position feedback signal 4-20 mA, bus connection
Electric Part-Turn Actuators, Type J+J
Torque: 10 - 300 Nm ▪ Construction acc. to ISO 5211 / DIN 3337
▪ Design:heating resistor, limit switches, manual override
Voltage: 12 V - 230 V AC/DC
Ambient tempe-rature (°C): -20 up to +70
Body materials: Polyamide (PA6), polypropylene (PP)
Degree of protection:
IP65, IP67
Options: Fail-safe with battery, positioning system for control applications
Electric Actuators
53www.flowtec.atwww.flowtec.at
Positioners
Design: Analog, digital ▪ Modular construction▪ Compact, well-proven, and flexible design
▪ Exhaust opening with thread connection
▪ Easy to add on feedback unit F5
▪ Simple calibration, external zero adjustment
▪ High gain pilot valve▪ Built in gauge ports▪ Bright visible indicator, flat or Dome style
▪ Stainless steel cam
Supply air pressure:
up to 10 bar
High air capacity at mini-mum air consumption
Software: Solutions for diagnosis, maintenance, and confi-guration, integration into existing diagnostic systems
Options: HART, profibus, foundation field bus, partial stroke, non-contacting sensor
Approvals: ATEX, SIL2
Positioners
www.flowtec.atwww.flowtec.at54
Limit Switches, Limit Switch Boxes
Portfolio: Available from all well-known manufacturers
Design: Mechanical, inductive, etc.
Mounting: Directly at the actuator/valve or via limit switch box at the actuator
Solenoid Valves
Portfolio: Available from all well-known manufacturers
Design: NAMUR or Inline
Function: 3/2-, 5/2- or 5/3-way
Voltage range: up to 230 V AC/DC
Options: ATEX, cryogenic design
Pneumatic Accessories
Filter regulators
Throttle plates and silencers
Quick exhaust and booster valves
Valve islands
Mounting Accessories
Mounting kits for automation
Mounting kits for manual valves
Reducing sleeves and adapters
Stem extensions
Accessories