Vistex is a third party tool for better handling of rebates, sales commisssions, Billbacks, chargebacks etc in SAP R3 environment. 

The implementation duration depends on the scope but for example Incentive IP module takes appx 2-3 months in configuration( one resource). Bill back & chargeback takes same time.

Does Vistex implementation involve any Technical development efforts also along with configuration activities OR it is only configuring vistex modules? In SAP implementation project, Vistex consultant works in coordination with SD consultant. Is this understanding correct?

our company is implimenting the billback module but i dont see good documents available for the same even in config also. 

I am working as SD consultant here. 

do you haave any document which can be shared for specially Billback testing??

I recently read about SAP Compensation Management on a blog (sdmodule.com). Apparently it does the same thing as Vistex but it's a standard module and doesn't require an additional license. I don't see much documentation for it other than the enhancement package release notes. Here we implemented the Vistex billback module but it took over 18 months to get it working and the consulting resources were VERY expensive.

Did you know there’s an SAP standard module for contract pricing and chargeback management?  It provides the same functionality as the popular Vistex add-on but there are no license fees.  It’s called SAP Compensation Management and it’s part of the standard Logistics / Global Trade modules.   Take a look at this comparison:

Function Vistex SAP

Contract pricing

Chargeback processing

Chargeback reconciliation

Rebates

Extra license cost Yes Free

If you didn’t know about Compensation Management, don’t feel bad – it’s one of SAP’s best-kept secrets.  You won’t find it in SAP marketing materials or the training curriculum.  Even the online documentation is limited to just two pages, and there’s a lot of confusion with the HR module of the same name.  And yet it offers critical functionality for SAP wholesale distribution.It’s time to drag this shy module into the spotlight and give it the attention it deserves.  Take a look at the Key Features, then read on to learn more about the Compensation Management module in detail.  And of course,contact me with your questions, suggestions and comments.Read the rest of this series:

1. Contracts and Chargebacks with SAP Compensation Management2. SAP Compensation Management Key Features 3. Business Process 4. SAP Process 5. Screenshots 6. Conclusion

Compensation Management is fully available is Enhancement Pack 4 (EHP4), although some

of the code seems to have been present earlier.

To see the menus, you’ll also need to activate some business function sets. Check the EHP1

– EHP4 release notes (the “wholesale distribution” section) for the specific sets for your

implementation. I think you will need ISR_RET_COMPENSATION for the general functionality

and ISR_RET_AGENCY_3 if you want to use complaints processing.

Be sure to try this in a test system first – activating the business function sets is generally

harmless, but it cannot be undone.

As for Pharma, if you’re a manufacturer then I suggest using theCRM Pharma extensions for

manufacturers (inbound chargebacks). If you’re a wholesaler or retailer then Compensation

Management will work better.

VISTEX

Contracts and Chargebacks with SAP Compensation ManagementDid you know there’s an SAP standard module for contract pricing and chargeback management?  It provides the same functionality as the popular Vistex add-on but there are no license fees.  It’s called SAP Compensation Management and it’s part of the standard Logistics / Global Trade modules.   Take a look at this comparison:

Function Vistex SAP

Contract pricing

Chargeback processing

Chargeback reconciliation

Rebates

Extra license cost Yes Free

If you didn’t know about Compensation Management, don’t feel bad – it’s one of SAP’s best-kept secrets.  You won’t find it in SAP marketing materials or the training curriculum.  Even the online documentation is limited to just two pages, and there’s a lot of confusion with the HR module of the same name.  And yet it offers critical functionality for SAP wholesale distribution.It’s time to drag this shy module into the spotlight and give it the attention it deserves.  Take a look at the Key Features, then read on to learn more about the Compensation Management module in detail.  And of course,contact me with your questions, suggestions and comments.Read the rest of this series:1. Contracts and Chargebacks with SAP Compensation Management2. SAP Compensation Management Key Features 3. Business Process 4. SAP Process 5. Screenshots 6. Conclusion Sep 04, 2009 | Compensation Management, Pricing, SAP Chargebacks, SAP Contract Pricing, Vistex, Vistex Documentation | 18 Comments »

SAP Compensation Management Key FeaturesSAP Compensation Management is an ECC module that offers the following functionality:

Contract pricing Contract membership management Chargeback processing (chargeback submission and tracking)

Chargeback reconciliation Online processing and support for EDI (844/845/849)Compensation Management is intended for wholesalers.  For example, it provides outbound chargeback processing (chargeback submission).  If you are a manufacturer you may want to consider SAP CRM instead, since it provides contract pricing and inbound chargeback processing (I’ll post a future series on that topic).Even if you already have Vistex or another add-on package, SAP Compensation Management is worth a look. The provided functionality is superb and it’s even possible to combine the two: for example you can use contract pricing from Compensation Management module along with chargebacks from Vistex, or vice-versa.

Contract Pricing Functions

Contract Loading and Prioritization

 Inbound EDI 845 support

 Multiple overlapping pricing contracts for a customer/product

 Customizable contract prioritization (best-price, contract type, etc.)

Contract Header

 Multiple contract validity dates at header, customer and product level

 Track internal contract reference number and vendor’s contract number

 Set "assignment" number that will appear on all contract-related FI documents

 Special payment terms or additional value days at contract header and product level

 Create contracts in "pending" status

 Configurable contract status management and workflow

 Instantly find SD documents and chargebacks related to a contract

 Configurable texts for notes about contract

 Attach source documents (spreadsheets, emails, faxes, etc.)

 Configurable contract output including EDI, ALE, print, fax, Excel, email, etc.

Contract Customers

 Add and search for customers by DEA number, HIN number, vendor reference number or identifiers

 Load customers in "pending" status until released

 GPO roster management

 Class-of-trade and other customer lists

 Add GPO rosters and customer lists to contract

 Filter (exclude) customers or lists of customers from contract

 Export contract customer list to Excel, print, email, etc.

 Manage contract customers that are not loaded in the wholesaler’s SAP system

 Configurable texts for notes about customer

Contract Pricing Functions

Contract Products and Pricing

 Add products by NDC number

 Search for products by name, number, NDC number, vendor part number, etc.

 Contract pricing, discounts and surcharges by contract, customer, product, etc.

 Contract rebate conditions

 Contract prices by customer, GPO, product or other criteria

 "Tiered" (scaled) contract pricing based on sales quantity

 Validity period management (for example, price validity cannot exceed contract validity)

 Export products and pricing to Excel, print, email, etc.

 Manage contract products that are not loaded in wholesaler’s SAP system

 Search for conditions across multiple contracts

SD Integration

 Display eligible contract and contract determination directly on SD document

 Contract pricing, discounts and surcharges by contract, customer, product, etc.

 WAC pricing

 Accrue expected chargeback revenue

Other

 Standard extractors for BW

 Standard archiving functions

 Full change log and audit history

 Search for contracts by member, product, vendor, dates, etc.

 Report to submit chargebacks when a contract is loaded retroactively

Chargeback Functions

Chargeback Creation

 Outbound EDI 844 and inbound 849 support

 Automatic and manual creation

 Create chargebacks in batch, periodically or immediately

 Combine multiple chargeback requests into a "collective chargeback request" to reduce transaction volume

 Full chargeback workbench integration (all document display and processing can be done without leaving workbench)

 Generate chargebacks when a contract is loaded retroactively

Chargeback Document

Chargeback Functions

 Chargeback pricing procedure and account determination (can be used to adjust chargeback amounts, accrue rebates, post to specific accounts, etc.)

 View contract data in chargeback

 Track vendor’s reference number

 View vendor data in chargeback

 Output and/or re-submit chargebacks using EDI 844, print, fax, email, etc.

 Document flow including chargebacks, SD documents and contracts

 Chargeback linked to all source EDI transactions

 Full change log and audit history

 Standard extractors for BW

 Standard archiving functions

Reconciliation

 All chargeback rejections, statuses and paid amounts visible on chargeback document

 Track requested and paid chargeback amounts separately

 Track rejection reasons

 Customizable rejection processing including custom fields, validations and workflow

 Reverse and reopen posted chargebacks as a result of subsequent reconciliation

 Web portal for manufacturers to enter chargeback response into your SAP system

Read the rest of this series:1. Contracts and Chargebacks with SAP Compensation Management 2. SAP Compensation Management Key Features3. Business Process 4. SAP Process 5. Screenshots 6. Conclusion Sep 04, 2009 | Compensation Management, Pricing, SAP Chargebacks, SAP Contract Pricing, Vistex, Vistex Documentation | Leave A Comment »

Business ProcessSAP Compensation Management covers many different wholesale distribution scenarios.  Any any business that uses sophisticated pricing contracts or chargebacks (or chargeback variants, such a price protection or bill-backs) needs a way to manage those processes.

For this series, I’ll present the business process for pharmaceutical wholesalers as an example, and show how Compensation Management can be used for contract pricing and chargeback management. 

The diagram below shows the pharma wholesale business process from contract negotiation through chargeback reconciliation.

The contract pricing and chargeback process begins when a drug manufacturer negotiates a pricing contract with one or more customers.  The contract defines discounted pricing for certain products.  The Contract may be signed with an individual customer, but more often it is an agreement with a Group Purchasing Organization (GPO) that represents multiple customers.

The manufacturer sends the pricing contract information to wholesalers that carry its products.  The contract is sent via EDI 845, email or fax.  Contracted products are identified by NDC number.  Eligible customers may be listed explicitly by DEA or HIN number, or the contract may just indicate that some customer group is eligible (for example, a GPO’s customer membership or a particular class of trade).

When an eligible end-customer purchases a contracted product, the wholesaler invoices the customer at the contract price.  Contract prices are generally below the Wholesale Acquisition Cost, or "WAC" (the standard price that a wholesaler pays to purchase a product from the manufacturer).  This means that the wholesaler is often in a position where it must sell product below at a price below its own acquisition cost.

To make the wholesaler "whole" again a chargeback request is submitted to the manufacturer.  The chargeback request is a request for a credit of the difference between WAC and contract price. For example: if WAC for a product is $100 and the contract price is $90, the wholesaler will sell the product to an eligible end customer for $90 – but it will also submit a chargeback request to the manufacturer for the $10 difference between WAC and contract price.  The wholesaler’s profit margin is derived from marking up the contract price, or other means (such as collecting a cash discount from the manufacturer).The chargeback request is sent via EDI 844 or EDI 867, email, or fax.  The request includes detailed information about one or more sales to end customers (called the "line items" of the chargeback).  This information includes: the sale date, customer identifier such as DEA or HIN number, the product NDC code, and pricing information such as quantity, WAC price, contract price, and requested chargeback amount.

The manufacturer validates the chargeback request against its own contract pricing system. If the request is approved, the manufacturer issues a credit to the wholesaler, or, if the chargeback is determined to be invalid, it may be partially paid or not paid at all.

The manufacturer then sends the wholesaler a chargeback response via EDI 849, email or fax.  The response lists the payment amount for each chargeback line item.  If a line item was rejected or partially paid, the response also lists rejection reasons explaining why it was not accepted.Read the rest of this series:1. Contracts and Chargebacks with SAP Compensation Management 2. SAP Compensation Management Key Features 3. Business Process4. SAP Process 5. Screenshots 6. Conclusion Sep 04, 2009 | Compensation Management, Pricing, SAP Chargebacks, SAP Contract Pricing, Vistex | Leave A Comment »

SAP ProcessIn the last post in this series I covered the general business process for contract pricing and chargeback processing using SAP Compensation Management instead of Vistex.  This time I’ll explain how the contract pricing and chargeback process is handled within Compensation Management.

1. The process begins with the creation of a pricing contract in the Compensation Management module. The contract is sent from the manufacturer to the wholesaler by EDI 845, email or fax, and a Compensation Management contract is created in SAP.  The contract lists all of the customers and products that are eligible for contract pricing. Each contract is assigned to a manufacturer. The manufacturer is represented as a vendor in SAP. If a GPO was involved in the contract negotiation then it is also assigned to the contract. The GPO may be stored just for reference, or to drive special pricing or special contract prioritization.

2. When a sales order is created in the SD module the system determines for each product whether the customer is eligible for a pricing contract. If so, the contract is assigned to that order line and it is given a contract price. The determination logic may be simple, such as assigning the lowest contract price from a group of contracts, or it can be more complex, such as prioritizing certain contract types or GPOs over others.

3. Normal SD processing then continues and the order is delivered.4. Normal SD processing continues and the customer billing document is created. 

For contracted products the customer is invoiced at the contract price. The billing document also includes several other pricing conditions that are necessary for chargeback processing, including WAC price and expected chargeback revenue.  When the billing document is saved and released to the FI module, the expected chargeback revenue is posted as an accrual.

5. A chargeback request document is created. This chargeback is linked to the billing document and to the pricing contract. It contains all of the data needed to submit a chargeback to the manufacturer.

6. Individual chargeback request documents can be combined into a "collective chargeback request" to reduce chargeback volume with the manufacturer. The individual or collective requests are submitted via EDI 844, email, or fax.

7. The manufacturer reviews the submitted chargebacks and responds with a chargeback reconciliation document via EDI 849, email, or fax. The reconciliation includes the paid amount and any rejection reasons for each chargeback line item.  

8. Once the chargeback document has been reconciled, it is released to FI. The accrual for the chargeback amount is reversed and the actual chargeback amount is posted as a vendor credit.

Read the rest of this series:1. Contracts and Chargebacks with SAP Compensation Management 2. SAP Compensation Management Key Features 3. Business Process 4. SAP Process5. Screenshots 6. Conclusion Sep 04, 2009 | Compensation Management, Pricing, SAP Chargebacks, SAP Contract Pricing, Vistex | 1 Comment »

ScreenshotsIn prior posts, I’ve presented the business process and the SAP process for chargeback processing and contract pricing, using the SAP standard Compensation Management module instead of Vistex.This time I’ll cover the process in more detail and work through an example in an SAP system.  I’ll reference the diagram below and provide some screenshots for each step (note that you can click on the thumbnails to see a full-size image).

One thing you may notice immediately from the diagram is that all contract pricing and chargeback data is available in SAP BW.  SAP provides standard BW extractors and key figures for detailed contract and chargeback reporting.

Step 1. Condition Contract

The first step in the process is to create a pricing contract. Figure 1 shows the SAP Compensation Management contract entry screen.   In this example the contract was

received from vendor 3818 and it represents an agreement to sell material "MS" to customer CMS0000031 for $90.00 per piece.

Figure 1: SAP Compensation Management Contract (click for larger image)

I’ll also enter a comment about how this contract was received and attach a spreadsheet received from the manufacturer. The texts are fully customizable and a separate "attachment" button allows source documents such as spreadsheets, emails, and so on to be attached directly to the contract.

Figure 2: Contract Comments and Attachments (click for larger image)

Step 2. Sales Order

Now I’ll switch over to the SD module and enter a sales order for the contracted customers and material.  For contract-priced items, the order line item can be double-clicked to see the "Compensation Management" tab, which shows the contracts that were considered for pricing. The user can view the details for a contract by clicking on it.

Figure 3: Sales Order Contracts Tab (click for larger image)

Switching to the pricing conditions for the line item, we can see that SAP determined the WAC (condition ZWAC), contract price (condition PCHB) and expected chargeback amount (condition CHBK). The conditions are configurable, so it’s easy to create additional condition types such as discounts, surcharges or rebates.

In this example, the normal price for the item is $110.00 but the contract price is $90.00 so the sale is made at $90.00.  WAC is $100.00, so the expected chargeback amount is the difference between WAC and contract price, or $10.00.

Figure 4: Sales Order Contract Pricing (click for larger image)

Step 3. Billing Document

Once the order is delivered, the wholesaler’s end customer is invoiced.  The billing document has the same pricing conditions as the sales order.  When it’s released to accounting the expected chargeback amount is posted as an accrual.

Like the sales order, the billing document has a Compensation Management tab at the line level for contracted items, but it also has a Compensation Management tab at the header level.  This tab provides an overview of all chargeback "PPF actions" (outputs) generated for the billing document.  Here we can see that the system automatically created a chargeback request when the billing document was saved.

Figure 5: Billing Header Contracts Tab (click for larger image)

The second sub-tab "chargeback overview" shows information about all chargeback documents related to this billing document.  It’s possible to "drill-in" to any chargeback document directly from this screen.

Figure 6: Billing Document Header Chargeback Overview (click for larger image)

Step 4. Post A/R and Accrue Chargeback

When the billing document is released to FI, the expected chargeback amount is posted as an accrual.

Figure 7: Accounting Document for Customer Billing Document (click for larger image)

Step 5. Chargeback Request

Chargeback processing begins as soon as a chargeback-relevant SD billing document is saved.  A chargeback request is automatically created from the billing document (it’s also possible to group requests into a "collective request").

SAP calls a chargeback request a "remuneration request".  It’s represented in the system as an Agency Business document of type "CHBK".

The "chargeback workbench" transaction is used to monitor and control chargebacks at any point in the process.  The standard workbench settings allow users to perform all document processing without ever leaving the workbench.

In Figure 8 I’ve listed some chargeback documents and selected the header and item data for the chargeback I created previously.

Figure 8: Chargeback Workbench (click for larger image)

The chargeback request looks a lot like an SD billing document: it has header data, item data, texts, outputs, pricing conditions, and so on.  Figure 9 shows a chargeback request.

The "invoicing party" is the vendor to whom we’re submitting the chargeback (3818) and the "payment reference" field is used to store the chargeback reference number received from the vendor in the chargeback response document (see below).  Since I haven’t submitted the chargeback to the vendor yet, this field is blank.

The chargeback document has its own pricing procedure along with configurable rules for copying pricing conditions from the source billing document.  This is a very powerful feature because it allows all kinds of new pricing in the chargeback.  For example, the chargeback pricing procedure can be used to adjust chargeback amounts by vendor or product, to automatically post payment differences to a write-off account, or to post additional conditions such as rebate accruals.

Figure 9: Chargeback Request (click for larger image)

Step 6. Send Chargeback to Vendor

The chargeback can now be submitted to the vendor.  SAP provides a configurable output procedure for chargeback requests, and outputs can be triggered based on business logic or generated manually.  Messages are entered on the chargeback document "output" tab.  Figure 10 shows an EDI 844 message sent to the vendor.

Figure 10: EDI 844 Output (click for larger image)

Step 7. Record Vendor Response and Reconcile

The vendor reviews the submitted chargeback and provides a chargeback response (via EDI 849, email, or fax). A reference number is also included in the response and stored on the SAP chargeback document for future resubmissions.

For each line item the vendor will approve it and pay it, or specify a partial payment amount along with one or more rejection reasons.

For this example, we’ll assume the item was partially paid with a rejection reason code "WAC incorrect".  The vendor expected WAC to be $99.95, but the WAC on the chargeback request was $100.00.  Based on a $90.00 contract price, the vendor expected a chargeback request for $9.95 rather than the $10.00 that was submitted.

The system behavior for each type of rejection is fully configurable.  In this example, the system has been set to automatically post the chargeback difference to a write-off account.

Rejections are recorded on the chargeback document as a "complaint", which links the chargeback to a "complaint document".  Complaint processing is completely configurable: for each reason code additional fields, validations, triggers, and workflows can be defined.

Figure 11: Chargeback Complaint (click for larger image)

Step 8. Release Chargeback to FI

The chargeback is now complete and can be released to FI.  Based on the chargeback pricing procedure, the original chargeback accrual (for $10.00) is reversed and the actual amount paid ($9.95) is posted to chargeback revenue and as a credit on the vendor account.  The difference of $0.05 is posted to a write-off account.

The chargeback release can be performed through various transactions.  I’ll use the chargeback workbench – just clicking on the "execute" button will release all selected chargebacks to FI (see Figure 12).

Figure 12: Mass Chargeback Release to FI (click for larger image)

Read the rest of this series:1. Contracts and Chargebacks with SAP Compensation Management 2. SAP Compensation Management Key Features 3. Business Process 4. SAP Process 5. Screenshots6. Conclusion Sep 04, 2009 | Compensation Management, Pricing, SAP Chargebacks, SAP Contract Pricing, Vistex | Leave A Comment »

ConclusionI hope you’ve enjoyed this brief introduction to wholesaler contract pricing and chargeback processing using SAP Compensation Management instead of Vistex.I’ve barely scratched the surface about topics like chargeback reconciliation, pricing, and rebates.  And there are other areas like credit-and-re-bill processing and the chargeback web portal that I didn’t cover at all.

If you’d like to know more, I encourage you to check out the key features post to get an idea about what other functionality is available (at a high level).  Then let me know what you’d like to see in future posts.And of course: if you would like consulting or training help, please contact me.Read the rest of this series:1. Contracts and Chargebacks with SAP Compensation Management 2. SAP Compensation Management Key Features 3. Business Process 4. SAP Process 5. Screenshots 6. Conclusion