SAP® Farm Management by Vistex, release 6
Transcript of SAP® Farm Management by Vistex, release 6
Application Help PUBLIC
Document Version: 1.0 – Final
Date: March 30, 2020
SAP® Farm Management by Vistex, release 6.1
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
Table of Contents 1 Navigation ............................................................................................................................................................... 6
1.1 Help Navigation ................................................................................................................................................ 6
1.1.1 Contents ................................................................................................................................................... 6
1.1.2 Documentation ......................................................................................................................................... 6
2 Glossary .................................................................................................................................................................. 7
2.1 A ....................................................................................................................................................................... 7
2.1.1 AB Application .......................................................................................................................................... 7
2.1.2 Absolute Terrain Area .............................................................................................................................. 7
2.1.3 Active Ingredient ...................................................................................................................................... 7
2.1.4 Agreement................................................................................................................................................ 7
2.1.5 Application Method ................................................................................................................................... 7
2.1.6 Attribute .................................................................................................................................................... 7
2.1.7 Attribute Group ......................................................................................................................................... 7
2.2 B ....................................................................................................................................................................... 7
2.2.1 Basis for Order Quantity ........................................................................................................................... 7
2.2.2 Bucket ...................................................................................................................................................... 7
2.2.3 Business Script ........................................................................................................................................ 7
2.3 C ....................................................................................................................................................................... 8
2.3.1 Calculated Contract Area ......................................................................................................................... 8
2.3.2 Calculated Yield ....................................................................................................................................... 8
2.3.3 CAT Confirmation Criteria ........................................................................................................................ 8
2.3.4 Confirmation Quantity .............................................................................................................................. 8
2.3.5 Crop Group .............................................................................................................................................. 8
2.3.6 Crop Process ........................................................................................................................................... 8
2.3.7 Crop Season ............................................................................................................................................ 8
2.4 D ....................................................................................................................................................................... 8
2.4.1 Deduction Procedure ............................................................................................................................... 8
2.5 E ....................................................................................................................................................................... 8
2.5.1 Estimated Yield ........................................................................................................................................ 8
2.5.2 Expected Yield ......................................................................................................................................... 8
2.6 G ....................................................................................................................................................................... 8
2.6.1 Gross Terrain Area ................................................................................................................................... 8
2.7 I ......................................................................................................................................................................... 9
2.7.1 Irrigation Type .......................................................................................................................................... 9
2.8 L ........................................................................................................................................................................ 9
2.8.1 Launchpad ............................................................................................................................................... 9
2.9 M ....................................................................................................................................................................... 9
2.9.1 Measurement Document .......................................................................................................................... 9
2.9.2 Multi Order ............................................................................................................................................... 9
2.10 O ................................................................................................................................................................... 9
2.10.1 Order Level .............................................................................................................................................. 9
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
2.10.2 Ownership ................................................................................................................................................ 9
2.11 P ................................................................................................................................................................... 9
2.11.1 Planning Number ..................................................................................................................................... 9
2.11.2 Planning Version ...................................................................................................................................... 9
2.11.3 Post-Harvest Interval (PHI) ...................................................................................................................... 9
2.11.4 Process Cycle .......................................................................................................................................... 9
2.11.5 Process Order .......................................................................................................................................... 9
2.11.6 Produce Type ........................................................................................................................................... 9
2.12 Q ................................................................................................................................................................. 10
2.12.1 Quality Characteristics (Agreement) ...................................................................................................... 10
2.12.2 Quality Deduction Amount...................................................................................................................... 10
2.13 R ................................................................................................................................................................. 10
2.13.1 Receiver Material ................................................................................................................................... 10
2.13.2 Restricted Entry Interval (REI) ................................................................................................................ 10
2.14 S ................................................................................................................................................................. 10
2.14.1 Schedule Category ................................................................................................................................. 10
2.14.2 Schedule Task ....................................................................................................................................... 10
2.14.3 Schedule Type ....................................................................................................................................... 10
2.14.4 Season ................................................................................................................................................... 10
2.14.5 Settlement .............................................................................................................................................. 10
2.15 T ................................................................................................................................................................. 10
2.15.1 Task ....................................................................................................................................................... 10
2.15.2 Task order .............................................................................................................................................. 10
2.15.3 Terrain .................................................................................................................................................... 10
2.15.4 Terrain Level .......................................................................................................................................... 11
2.15.5 Terrain structure indicator ...................................................................................................................... 11
2.16 U ................................................................................................................................................................. 11
2.16.1 Unplanned Indicator ............................................................................................................................... 11
2.17 V ................................................................................................................................................................. 11
2.17.1 Variant (Crop Master) ............................................................................................................................. 11
2.18 W ................................................................................................................................................................ 11
2.18.1 Workbench ............................................................................................................................................. 11
2.18.2 Work Breakdown Structure (WBS) Element ........................................................................................... 11
2.19 Y ................................................................................................................................................................. 11
2.19.1 Yard Material .......................................................................................................................................... 11
2.19.2 Yard Order ............................................................................................................................................. 11
3 Global ................................................................................................................................................................... 12
3.1 Terrain Master Workbench ............................................................................................................................. 12
3.1.1 Definition ................................................................................................................................................ 12
3.1.2 Access ................................................................................................................................................... 12
3.1.3 Structure................................................................................................................................................. 12
3.1.4 Procedure............................................................................................................................................... 15
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
3.2 Crop Master Workbench ................................................................................................................................. 17
3.2.1 Definition ................................................................................................................................................ 17
3.2.2 Access ................................................................................................................................................... 17
3.2.3 Structure................................................................................................................................................. 17
3.2.4 Procedure............................................................................................................................................... 35
3.3 Crop Seasons ................................................................................................................................................. 39
3.3.1 Definition ................................................................................................................................................ 39
3.3.2 Access ................................................................................................................................................... 39
3.3.3 Structure................................................................................................................................................. 39
3.3.4 Procedure............................................................................................................................................... 42
3.4 Attribute Workbench ....................................................................................................................................... 43
3.4.1 Definition ................................................................................................................................................ 43
3.4.2 Access ................................................................................................................................................... 43
3.4.3 Structure................................................................................................................................................. 44
3.4.4 Procedure............................................................................................................................................... 44
3.5 Attribute Group Workbench ............................................................................................................................ 45
3.5.1 Definition ................................................................................................................................................ 45
3.5.2 Access ................................................................................................................................................... 45
3.5.3 Structure................................................................................................................................................. 45
3.5.4 Procedure............................................................................................................................................... 46
3.6 Status Profile Workbench ............................................................................................................................... 47
3.6.1 Definition ................................................................................................................................................ 47
3.6.2 Access ................................................................................................................................................... 47
3.6.3 Structure................................................................................................................................................. 48
3.6.4 Procedure............................................................................................................................................... 57
3.7 Status Flow Workbench .................................................................................................................................. 58
3.7.1 Definition ................................................................................................................................................ 58
3.7.2 Access ................................................................................................................................................... 58
3.7.3 Structure................................................................................................................................................. 58
Flow Steps ............................................................................................................................................................ 64
Outcomes for Steps: ............................................................................................................................................. 66
3.7.4 Procedure............................................................................................................................................... 70
4 Farm Management ............................................................................................................................................... 73
4.1 Farming Process ............................................................................................................................................. 73
4.1.1 Definition ................................................................................................................................................ 73
4.1.2 Access ................................................................................................................................................... 74
4.1.3 Structure................................................................................................................................................. 74
4.1.4 Procedure............................................................................................................................................... 81
4.2 Schedule Task Orders .................................................................................................................................... 85
4.2.1 Definition ................................................................................................................................................ 85
4.2.2 Access ................................................................................................................................................... 85
4.2.3 Structure................................................................................................................................................. 85
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
4.2.4 Procedure............................................................................................................................................... 87
4.3 Schedule and Task Orders ............................................................................................................................. 88
4.3.1 Definition ................................................................................................................................................ 88
4.3.2 Access ................................................................................................................................................... 88
4.3.3 Structure................................................................................................................................................. 88
4.3.4 Procedure............................................................................................................................................... 89
4.4 Create Mass Unplanned Task Orders ............................................................................................................. 90
4.4.1 Definition ................................................................................................................................................ 90
4.4.2 Access ................................................................................................................................................... 90
4.4.3 Structure................................................................................................................................................. 91
4.4.4 Procedure............................................................................................................................................... 91
4.5 Mass Farming Process Order Creation ........................................................................................................... 92
4.5.1 Definition ................................................................................................................................................ 92
4.5.2 Access ................................................................................................................................................... 92
4.5.3 Structure................................................................................................................................................. 92
4.5.4 Procedure............................................................................................................................................... 93
4.6 Mass Order Confirmation ................................................................................................................................ 93
4.6.1 Definition ................................................................................................................................................ 93
4.6.2 Access ................................................................................................................................................... 94
4.6.3 Structure................................................................................................................................................. 94
4.6.4 Procedure............................................................................................................................................... 95
4.7 Mass Technically Complete/Revoke Task Orders .......................................................................................... 95
4.7.1 Definition ................................................................................................................................................ 95
4.7.2 Access ................................................................................................................................................... 95
4.7.3 Structure................................................................................................................................................. 95
4.7.4 Procedure............................................................................................................................................... 96
4.8 Nursery Process ............................................................................................................................................. 97
4.8.1 Definition ................................................................................................................................................ 97
4.8.2 Access ................................................................................................................................................... 97
4.8.3 Structure................................................................................................................................................. 97
4.8.4 Procedure............................................................................................................................................. 104
4.9 Produce Receipt ........................................................................................................................................... 105
4.9.1 Definition .............................................................................................................................................. 105
4.9.2 Access ................................................................................................................................................. 105
4.9.3 Structure............................................................................................................................................... 105
4.9.4 Procedure............................................................................................................................................. 114
Application Help PUBLIC
1 Navigation
1.1 Help Navigation The help screen is organized into two panes:
• Contents, which appears in the left pane. The opening display is considered the Home page.
NOTE: This pane also displays search results. To quickly locate documentation for a specific topic,
enter the word(s) to search for in the Search field and click on the Go button. From the resulting list of
documents, click on a specific document title.
• Documentation, which appears in the right pane
1.1.1 Contents Use the Contents pane to view a list of topics included in the documentation. The following icons are used in the
list:
• Folder, which stores the documents for a topic (and sometimes other folders). Click on the icon to
expand the topic list. When expanded, the icon changes to ; click on this icon to collapse the topic
list.
• Topic, which links to a specific document.
NOTE: To hide the Contents pane, click on the X (Hide Navigation Component) control. To re-display the
Contents pane, click on the Contents button at the top of the page.
1.1.2 Documentation Each document contains the following information:
• Title Icon
• Hypertext Links
1.1.2.1 Title Icon
1.1.2.2 Links within Documents Within a document, hypertext links provide quick access to other documents.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
7
2 Glossary
2.1 A
2.1.1 AB Application It is used at the Process Cycle to establish if the processes for a determined Crop will correspond to farming or
nursery (seed production).
2.1.2 Absolute Terrain Area It refers to the net area of a Terrain (field) available for the sowing.
2.1.3 Active Ingredient In ABS is the code and description used to identify the components of the chemical product to be applied on the
field.
2.1.4 Agreement Contract between two or more parties with mutual obligations. It serves as central repository and is the foundation
for Grower Management processing.
2.1.5 Application Method Code and description to identify the diverse methods used to put or spread on the chemical substances on the
field.
2.1.6 Attribute Known as a characteristic in SAP, an attribute defines the allowed values for an organizational object.
2.1.7 Attribute Group A flexible grouping of attributes based on business requirements. Attribute groups appear as tab headings in the
organizational object workbenches.
2.2 B
2.2.1 Basis for Order Quantity Refers to the quantity base used to create an order to execute the farming or nursery activities. It could be: Absolute
Area, Gross Area or Estimated Yield.
2.2.2 Bucket A place holder for data that needs to be processed. ABS buckets are used to index ABS document line items based
on certain criteria, in preparation for subsequent processing of a large volume of data across multiple ABS
documents.
2.2.3 Business Script Vistex scripting method used to configure business rules, define validations, and create calculation formulas.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
8
2.3 C
2.3.1 Calculated Contract Area Area included in the agreement calculated from the area of the terrains assigned to the agreement and their
corresponding percentage.
2.3.2 Calculated Yield If the product of multiply the Expected Yield registered at the Crop Master and the Absolute Terrain Area of the
Crop Season.
2.3.3 CAT Confirmation Criteria Parameter to use to confirm the activities within the Chemical Application Tracking. It could be by number of tanks
or by worked area.
2.3.4 Confirmation Quantity Specifies the quantity to be posted as a good receipt of a task order (progress), or as a good issue in the case of
the supplies.
2.3.5 Crop Group Code assigned to diverse crops and seasons in the Agri Planning Demand, in order to run a grouped planning
scenario.
2.3.6 Crop Process Represents a major agricultural process (Planting, Growing, Harvesting) as agricultural stage to be planned and
scheduled during a period of time.
2.3.7 Crop Season Corresponds to the assignment of a particular crop to a terrain in a period.
2.4 D
2.4.1 Deduction Procedure Defines how the deduction are going to be handled within the agreement and bucket for settlement.
2.5 E
2.5.1 Estimated Yield Refers to the total quantity of yield estimated for a crop in a particular terrain, in its absolute area.
2.5.2 Expected Yield Quantity expected to be obtained from the farming processes when harvest activities are completed in a determined
area.
2.6 G
2.6.1 Gross Terrain Area Corresponds to the total area of a terrain or field, including the area not used for sowing, like roads or water affluent.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
9
2.7 I
2.7.1 Irrigation Type Indicates the type of infrastructure to be created, according to the equipment to be used like weather stations,
measurement equipment, or implements for application as pumps or sprinklers among others
2.8 L
2.8.1 Launchpad A user-friendly screen that allows authorized users to access their notifications, work list, and a predefined menu
of GUI transactions and reports, web-based applications, and external links (URLs). Menus can be designed for
specific roles, organizational objects, and individual users.
2.9 M
2.9.1 Measurement Document Document used to track through time measures of field Attribute groups. This document is used to record readings
related to the terrains, irrigation and/or harvesting activities.
2.9.2 Multi Order Flag which indicates the allowance of create several orders for a process in a crop season.
2.10 O
2.10.1 Order Level Indicates the level within a crop process to create and schedule orders. It could be only at process level, or at
process and task level.
2.10.2 Ownership Indicates if the terrain to be sowed belongs to the company or to a third parties.
2.11 P
2.11.1 Planning Number Number which identifies each planning scenario in a plant.
2.11.2 Planning Version Key that identifies the Agribusiness Planning Scenario; it is used to determinate the control parameters of the
planning.
2.11.3 Post-Harvest Interval (PHI) Refers to the time that must pass between the chemical application and the produce harvest.
2.11.4 Process Cycle Object to set the major agricultural processes for farming or nursery operations, with the basic data required to
further agricultural activities.
2.11.5 Process Order Order created to program the process and trigger the activities related to it (if applies).
2.11.6 Produce Type Refers to the crop type.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
10
2.12 Q
2.12.1 Quality Characteristics (Agreement) Attributes to be measured that could affect the settlement to a grower.
2.12.2 Quality Deduction Amount Amount that is deducted during the settlement process, due to results of quality inspections procedures.
2.13 R
2.13.1 Receiver Material Material received by the processing plant during the produce receipt process.
2.13.2 Restricted Entry Interval (REI) Time period immediately following a pesticide application during which entry into the treated area is restricted.
2.14 S
2.14.1 Schedule Category Determines how the schedule type is going to be handled within the agreement, in a specific date, periodic or by
milestone
2.14.2 Schedule Task Flag that indicates whether a task in a crop process require to be scheduled or not, previous creation of its order.
2.14.3 Schedule Type Defines the type of object to be scheduled for a grower in the agreement. (e.g. advances, milestone payments).
2.14.4 Season Establish the period of production of the crop, defining estimated start and end date to perform agricultural
processes.
2.14.5 Settlement Process of paying participants of a plan, depending on qualifying eligibility and calculations. Postings are made to
Finance GL accounts.
2.15 T
2.15.1 Task Correspond to agriculture activity that has to be executed within a process of the crop cycle. Alphanumeric key
uniquely identifying the task.
2.15.2 Task order Order which represents the activity the task performed on a field.
2.15.3 Terrain Object that represents physical locations or fields where farm operations are performed, containing all the relevant
information of the land and the farming processes related to it.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
11
2.15.4 Terrain Level Use to represent the geographic and administrative areas disposed for costing and farm operations.
2.15.5 Terrain structure indicator Establish the hierarchy levels structure for a terrain. E.g. 1 Company, 2 State, 3 Region, 4 Zone, 5 Block.
2.16 U
2.16.1 Unplanned Indicator Flag which indicates that a Task Order has been created without a previous schedule. (Unplanned order).
2.17 V
2.17.1 Variant (Crop Master)
Object that allows to have different versions of agricultural treatments, which contains the crop processes to
perform in a crop.
2.18 W
2.18.1 Workbench A work area where many different functionalities within Vistex can be created, changed, or deleted
2.18.2 Work Breakdown Structure (WBS) Element
Individual elements in the Project System. Within the Vistex Agribusiness Suite WBS elements are used to
identify a terrain and the crop sowed on it in a period. These elements belong to a Project which represents the
terrain.
2.19 Y
2.19.1 Yard Material
Final produce obtained after the farming processes performed on commercial fields, and which is delivered and
weighed on the scale through produce receipt functionality.
2.19.2 Yard Order Order created for a Yard Material used to carry costs of the whole agricultural farming processes.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
12
3 Global
3.1 Terrain Master Workbench
3.1.1 Definition Terrains for Vistex Agribusiness Suite allows to represent physical locations or fields where farm operations are
performed, containing all the relevant information of the land and the farming processes related to it.
3.1.2 Access
Transaction code: /AGRI/GLFLM
3.1.3 Structure
The Terrain Workbench screen is organized into the following areas:
• Search and Worklist
Use the Search and Worklist to view selected Terrains in a grid format. From the grid, click on Terrains
to display that Terrain in focus in the Work Area.
• Work Area
Use the Work Area to maintain Terrain. In the standard Vistex Implementation, the Work Area contains the
following tabs:
3.1.3.1 Search and Worklist
When you enter the transaction, the Search and Worklist appears in the left side of the screen, with the Search
tab active.
The Search and Worklist initially appears collapsed but can be resized horizontally. As needed, use the following
buttons (located above the Search and Worklist) to adjust the Search and Worklist:
Button Action Alternate Access
Display ↔ Hide Worklist
Toggle between displaying and hiding the Search and Worklist.
F7 or
Menu bar: Environment → Display ↔Hide Worklist
Minimize Worklist
Partial screen view of Search and Worklist.
F8 or
Menu bar: Environment → Minimize Worklist
Maximize Worklist
Full screen view of Search and Worklist.
F9 or
Menu bar: Environment → Maximize Worklist
Worklist ↔ Calendar
Toggle between displaying the Search and Worklist and the Calendar view.
Shift+F9
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
13
The Search and Worklist contains the following tabs:
• Search
• Worklist
Click on a tab to activate it (the active tab name will be shown as white text in a dark background). In the tab
name, the number in parentheses indicates the number of displayed lines.
Search Tab
Use the Search tab to locate and list of process orders. Search results appear in a grid that can be sorted and
searched.
The following buttons appear in the Search tab:
Button Action
Search
View the search criteria screen. Enter the search criteria, and then click on
the Execute button to perform the search.
NOTE: Search results are not retained when you leave the transaction.
Search More
After you perform a search, use Search More to retain the results from the previous search, perform a new search, and append the new results to the list already displayed.
Add to Favorites
Copy selected records from the search results to your Favorites group (on the Worklist tab) to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Favorites button to copy the lines to the Favorites group on the Worklist tab.
Add to Worklist
Copy selected records from the search results to the Worklist tab to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Worklist button. Select an existing group from the Move to Group dropdown list or create a new group to which the items will be copied.
Details
View selected records in a vertical column format in a separate window.
Sort in Ascending Order
Sort the data in a selected column in ascending alphanumeric sequence.
Sort in Descending Order
Sort the data in a selected column in descending alphanumeric sequence.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
14
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window. In that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
Worklist Tab
Use the Worklist tab to list the Terrains currently assigned to your worklist. Worklist entries appear in a grid format
that can be sorted and searched.
The following buttons appear in the Worklist tab:
Button Action
Add to Favorites
Copy selected records from the search results to your Favorites group (on the Worklist tab) to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Favorites button to copy the lines to the Favorites group on the Worklist tab.
Move to Group
Create a group for selected, move selected to an existing group or Favorites, or rename groups.
Delete
Delete selected from Favorites or other Worklist group.
Details
View selected records in a vertical column format in a separate window.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
15
Sort in Ascending Order
Sort the data in a selected column in ascending alphanumeric sequence.
Sort in Descending Order
Sort the data in a selected column in descending alphanumeric sequence.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window. In that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
3.1.3.2 Work Area
The following buttons above the Work Area apply to the Terrain displayed in focus:
3.1.4 Procedure
➢ Creating a New Terrain
➢ Maintaining the Terrain
Button Action Alternate Access
Display ↔ Change
Toggle between Display mode and Change mode.
F6 or
Menu bar: Terrain → Display ↔Change
Create (Change mode only)
Create a new Order.
NOTE: This button appears only when no existing process order is currently displayed in the Work Area.
F5 or
Menu bar: Farm Process → Create
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
16
➢ Displaying the Terrain
➢ Deleting the Terrain
Create Terrain Master
1.1. Access transaction code /AGRI/GLFLM
1.2. Select “Display <-> Change” button
1.3. Click on the “New” button
1.4. Enter the following information
1.4.1. Select the structure indicator
1.4.2. Enter the Terrain id to be created
1.5. Click “Enter” on your keyboard and Click on “Continue” button
1.6. Go to General Tab and enter the Gross Area and Unit
1.7. Click on the “Save” button
1.8. Terrain will be created
Maintaining the Terrain
1. Access transaction code /AGRI/GLFLM
2. Click on the button Display <--> Change, to enable the modification.
3. Click on the button Search, to open the searching options screen.
4. Enter the Terrain Id or required selection to get the terrain to be changed
5. Do the required changes and save
Displaying the Terrain
1. Access transaction code /AGRI/GLFLM.
2. Click on the button Search, to open the searching options screen.
3. Click on selected fields to activate ones, in order to make the searching.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
17
Deleting the Terrain
1. Access transaction code /AGRI/GLFLM.
2. Click on the button Display <--> Change, to enable the modification.
3. Click on the button Search, to open the searching options screen.
4. Enter the Terrain Id or required selection to get the terrain to be deleted
5. Select the terrain id and click on Terrain at the work area and select delete – Set
6. Terrain will be set to deletion flag
3.2 Crop Master Workbench
3.2.1 Definition
The Crop Master Workbench is to maintain the crop varieties information to the users. Relevant information, such
as the duration through each agricultural process at field, the often quality characteristics to check during the
growing and pre-harvesting, and so on, can be define into this functionality
3.2.2 Access
Transaction code: /AGRI/GLCMM
3.2.3 Structure
The Crop Master Workbench screen is organized into the following areas:
• Search and Worklist
Use the Search and Worklist to view selected Cop in a grid format. From the grid, click on Crop to
display that Crop in focus in the Work Area.
• Work Area
Use the Work Area to maintain Crop. In the standard Vistex Implementation, the Work Area contains the
following tabs:
3.2.3.1 Search and Worklist
When you enter the transaction, the Search and Worklist appears in the left side of the screen, with the
Search tab active.
The Search and Worklist initially appears collapsed but can be resized horizontally. As needed, use the
following buttons (located above the Search and Worklist) to adjust the Search and Worklist:
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
18
Button Action Alternate Access
Display ↔ Hide Worklist
Toggle between displaying and hiding the Search and Worklist.
F7 or
Menu bar: Environment → Display ↔Hide Worklist
Minimize Worklist
Partial screen view of Search and Worklist.
F8 or
Menu bar: Environment → Minimize Worklist
Maximize Worklist
Full screen view of Search and Worklist.
F9 or
Menu bar: Environment → Maximize Worklist
Worklist ↔ Calendar
Toggle between displaying the Search and Worklist and the Calendar view.
Shift+F9
The Search and Worklist contains the following tabs:
• Search
• Worklist
Click on a tab to activate it (the active tab name will be shown as white text in a dark background). In
the tab name, the number in parentheses indicates the number of displayed lines.
Search Tab
Use the Search tab to locate and list of crops. Search results appear in a grid that can be sorted and searched.
The following buttons appear in the Search tab:
Button Action
Search
View the search criteria screen. Enter the search criteria, and then click on
the Execute button to perform the search.
NOTE: Search results are not retained when you leave the transaction.
Search More
After you perform a search, use Search More to retain the results from the previous search, perform a new search, and append the new results to the list already displayed.
Add to Favorites
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
19
Copy selected records from the search results to your Favorites group (on the Worklist tab) to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Favorites button to copy the lines to the Favorites group on the Worklist tab.
Add to Worklist
Copy selected records from the search results to the Worklist tab to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Worklist button. Select an existing group from the Move to Group dropdown list, or create a new group to which the items will be copied.
Details
View selected records in a vertical column format in a separate window.
Sort in Ascending Order
Sort the data in a selected column in ascending alphanumeric sequence.
Sort in Descending Order
Sort the data in a selected column in descending alphanumeric sequence.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window. In that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
20
Worklist Tab
Use the Worklist tab to list the agreements currently assigned to your worklist. Worklist entries appear in a grid format that can be sorted and searched.
The following buttons appear in the Worklist tab:
Button Action
Add to Favorites
Copy selected records from the search results to your Favorites group (on the Worklist tab) to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Favorites button to copy the lines to the Favorites group on the Worklist tab.
Move to Group
Create a group for selected, move selected to an existing group or Favorites, or rename groups.
Delete
Delete selected from Favorites or other Worklist group.
Details
View selected records in a vertical column format in a separate window.
Sort in Ascending Order
Sort the data in a selected column in ascending alphanumeric sequence.
Sort in Descending Order
Sort the data in a selected column in descending alphanumeric sequence.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
21
If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window. In that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
3.2.3.2 Work Area
The following buttons above the Work Area apply to the Crop displayed in focus:
The screen areas into the Work Area, are as follows:
➢ Header screen
➢ Screen Tabs
✓ General
✓ Plants
✓ Crop Season
✓ Crop Cycles
✓ Quality Characteristics
✓ Status
Button Action Alternate Access
Display ↔ Change
Toggle between Display mode and Change mode.
F6 or
Menu bar: Crop → Display ↔Change
Create (Change mode only)
Create a new Order.
NOTE: This button appears only when no existing process order is currently displayed in the Work Area.
F5 or
Menu bar: Crop → Create
Copy
Used to copy the stored information from
a crop master as a template for the new
crop master.
Ctrl + F6
Delete
Used to delete the selected crop master
from the worklist.
Shift + F2
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
22
✓ Text
✓ Notes
✓ Additional Data 1
✓ Admin Data
Header:
This screen is used to select the crop to create. The screen displays the following fields:
Field Description
Produce Type Produce Type represents the crop specie.
Crop Code for the crop to create.
Description Description for the crop.
Reference Crop Code of Crop Master used as template to be copied.
Release Status Allows to Realese or Block the use of the crop master.
Current User Status Display the current crop master status.
Screen Tabs:
General Tab
This tab is used to assign the produce and delivery materials which will be posted into the Agribusiness
system once the harvested crop has been finished. The screen displays the following fields:
Field Description
Expected Yield The expected Yield field refers to the quantity in weight expected
to produce after the harvest for a crop variety in a determined
Area.
Yard Material Represent the current agricultural produce that has to be delivered
on the weight bridge scale at plant.
Receiver Material Receiver Material refers to the produced material received at
plant during the fruit reception (it can be a fruit, grain, seed,
other). It represents the main supply material required for the
production process.
Seed Production Material Represents the different seed production stages, since starting
process until be ready to be planted.
Plants Tab
This tab enables to add the available plants to produce the crop. The screen displays the following fields:
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
23
Field Description
Plant Plants code where are going to be enable the crop master.
Name 1 Defined name for the plant.
Valid From Date indicating the start when an entry is valid.
Valid To Date indicating the end when an entry is valid.
The following buttons are enables to use within the plants tab:
Button Action Alternate Access
Create New row to add the plant and the validation date.
Delete Delete the selected row from the plants table.
Details Open a new pop up window to display the plants tab information.
Find Find a term within the items table. The system highlights any cell that contains the term.
Find Next Find the next instance of a term searched for previously.
Filter Chose the records to be displayed. The filter can be associated to each column from the table.
Total Summarize the values for the selected column. This option is enabling only for valuated columns.
Subtotals There is possible to create subtotals in one or more columns in the list that are not value columns. The pre-requisite is to have stablished a total value for a least one column.
Export Export the entire contents of the items table to the selected document type/file type.
Choose Layout Choose, change, save, and manage column layouts within plant table.
Crop seasons Tab
This tab enables to display and create crop seasons for the crop master. The screen displays the
following fields:
Field Description
Terrain Terrain is a geographical place; represent the largest piece of land
where the plantation is taking place. A terrain can be divided into
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
24
several portions according to the agroindustry hierarchical views.
In ABS are used to represent the field structure.
Variante The variant allows to have different versions that contains the crop
processes to performance for a determined crop.
Season The Season is used to establish the production times (start
production and End Period) for a determined Produce type or
Crop. This information is used to schedule the times of the
agricultural processes.
Year Period, 12 months as a rule, for which the season is valid.
Start Date The Season Start Date indicates the starting time to perform the
Agricultural processes and tasks for a determined crop.
End Date The Season End Date indicates the finish time to perform the
Agricultural processes and tasks for a determined crop.
AB Application The AB Application is used at the Process Cycle to establish the
processes for farming or nursery (seed production) for a
determined Crop.
Status The Crop Season Status indicates if the Crop Season is Inactive,
Active or Closed.
WBS Element A structural element in a work breakdown structure representing
the hierarchical unique key associated to the terrain.
% of Terrain Area Represents the Percentage of Terrain Area used for a
determined crop variety.
Absolute Area The Absolute Terrain Area refers to the Net Area of a Terrain
(field) available for the sowing.
Gross Area The gross Terrain Area correspond to the Total Area of a terrain
or field. (Include roads and water effluents).
Internal Measure Unit Internal, language-independent, measurement unit format.
Calculated Yield The Calculated Yield is performed using the Expected Yield
registered at the Crop Master and the Absolute Terrain Area of
the Crop Season.
Unit of Measure Unit of measure for the calculated yield.
Expected Harvest Date Refers to the Date Expected for Harvest the crop from a
determined Field (Terrain).
Estimated Yield Refers to the Total Quantity Estimated Yield for a Crop in a
Determined Terrain (field). The user has to fill this field.
Weight Unit Unit of measure for the direct weight. Usually is used the KG or
TON units.
Crop Quantity Field used when agricultural task is going to be manage in a
different unit to the Area. In this field you have to enter the
quantity.
Crop Unit of Measure Field used when agricultural task is going to be manage in a
different unit to the Area. At this field enter the Unit of Measure.
Yard Order Represents the production order created for a yard material to
carry the cost of the whole agricultural production process. It
should be created before creating the orders for planting,
growing and harvest.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
25
Asset This is the number which, together with the asset sub-number,
identifies a fixed asset in Asset Accounting.
Cost Center Associated cost center to the terrain.
Settlement Order Display the object to settle the yard order.
Delete When a crop season has been deleted, the flag is set up into the check
box.
Elevation Elevation of the terrain.
Internal Measure Unit Unit of measure for the elevation.
Date Date on which the measurement reading was taken.
Measurement Time Time on which the measurement reading was taken.
Message Displays the text of the message.
The different options to handle the information, are as follows:
Button Action
Season Details
Open a pop up window with the crop season information for the selected row.
Process Cycles
Open a pop up window and shows the information from the crop cycle tab. For the selected row.
Process Flow
Open a pop up window with three splits, every one displays a list of the created orders for the process and tasks related to the crop season.
Display Measurement Documents
Link to open the measurement documents transaction and display the associated measure document for the crop season.
Column to row shuffle
Transpose the columns for the rows.
Details
View selected records in a vertical column format in a separate window.
Sort in Ascending Order
Sort the data in a selected column in ascending alphanumeric sequence.
Sort in Descending Order
Sort the data in a selected column in descending alphanumeric sequence.
Find
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
26
Find a term within the grid values. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Set Filter
Chose the records to be displayed. The filter can be associated to each column from the table.
Total
Summarize the values for the selected column. This option is enabling only for valuated columns.
Subtotals
There is possible to create subtotals in one or more columns in the list that are not value columns. The prerequisite is to have stablished a total value for a least one column.
Output device selection to print the records.
Views
Print Preview based on the printer settings.
Export
Export the entire contents of the grid area to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
Display Graphic
Displaying the values using the standard grapics and methods.
Change Layout
Allows the add or remove the columns from the ALV.
Crop Cycle Tab
A Crop Process Represents a major agricultural process (Planting, Growing, Harvesting) as Agricultural Stage to be planned and scheduled during a period of time. A process corresponds to each one of the main elements of a crop cycle. Each process is created as a material and is associated to a Crop master to create a variant.
The subareas into the crop cycle tab, are as follows:
➢ Variants ➢ Crop Process ➢ Operations list
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
27
Variants
The variants screen area allows to select the process cycle to create a new variant for the crop
process. The screen displays the following fields:
Field Description
Process Variants The process variant can have several means, such as treatments
for the crop, crop varieties and so on.
Description Description for the Process Variant.
AB Application The AB Application is used at the Process Cycle to establish the
processes for farming or nursery (seed production) for a
determined Crop.
Description Description for the AB Application.
Process Cycle Contains the processes sequence to follow up for a determined
crop. (Planting process, Growing process and Harvest process).
Description Description for the AB Application.
The following buttons are enables to use within the variant screen area:
Button Action Alternate Access
Create
Used to create a new variant code.
Change
Used to change the selected variant code from the list.
Delete
Used to delete the selected variant code from the list.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Change Layout
Allows the add or remove the columns from the ALV.
Details
View selected records in a vertical column format in a separate window.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
28
Crop Process
The Crop Process screen has a table where is showed the stored information for the selected process
cycle during the variant creation. The screen displays the following fields:
Field Description
Crop Process A Crop Process Represents a major agricultural process
(Planting, Growing, Harvesting) as Agricultural Stage to be
planned and scheduled during a period of time. A process
corresponds to each one of the main elements of a crop cycle.
Each process is created as a material and is associated to a Crop
master to create a variant.
Each material should have a Bill of Material and a Routing, in order
to schedule the agricultural activities to be performed on the fields.
Description Describes the crop process in more detail.
Prior Process Indicates that the Prior Process is required to continue with the
next crop process.
Order Level The Order Level has two options: A Process, B Process and
Task. A Process allows only to create Process orders. B.
Process and Task allows to create the process order and allows
to schedule the agricultural tasks.
Material Represents the material code in the ABS system, associated to
each crop process at farm.
Material Description Describes the process material in more detail.
Minimum Time Interval Minimum time interval to execute the crop process.
Time Unit Unit of time that the user wants to use.
Maximum Time Interval Maximum Time Interval to perform a Crop Process.
Time Unit Unit of time that the user wants to use.
Multi Order The multi Older flag allows to generate several orders for a same
process.
Goods Receipt Create When the Goods Receipt Create flag is active it allows the
material movements for process and task materials orders.
Basis of Order Quantity Refers to the quantity base used to create an order. There are
three options to use: Absolute Area, Gross Area and Estimated
Yield.
Schedule Task The schedule task field allows to schedule the agricultural task
required for a determined crop process, when the flag is active.
Special Application The Special Application has three options: Chemical Application,
Irrigation and Produce Receipt. Produce Receipt field is used to
define for Harvest if the material process will be used in the fruit
reception or in the harvest administration.
Sequence Refers to the sequence of performing the crop processes. The
sequence Indicates which crop process is first (planting
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
29
process), which crop process goes second (growing process),
which crop process goes third (harvest process).
The following buttons are enables to use within the crop process area:
Button Action Alternate Access
Display <-> Hide
Display or Hide the process variants screen.
Sync Process
Update the table with the current information from the crop cycle.
Details
View selected records in a vertical column format in a separate window.
Find
Find a term within the items table. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Filter
Chose the records to be displayed. The filter can be associated to each column from the table.
Total
Summarize the values for the selected column. This option is enabling only for valuated columns.
Subtotals
There is possible to create subtotals in one or more columns in the list that are not value columns. The prerequisite is to have stablished a total value for a least one column.
Export
Export the entire contents of the items table to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
30
Operations List
The Operation List screen has a table where is displayed the require information to stablish the crop
process duration. This information is taken from the routing for the process material. The screen
displays the following fields:
Field Description
Operation Determines the operations sequence for carried out.
Operation Short Text Operation description.
Required Overlapping The overlapping means that the selected operation will be
executed at the same time. The active flag is use to define the
overlapping among operations.
Base Quantity Quantity of the material to be produced to which the standard
values of the operation refer.
Unit of Measure Unit of measure used in the operation for the crop process
material.
Time Interval Time Interval required to perform an agricultural process.
Time Unit Time Unit used to indicate the Maximum and Minimum Time
Interval to perform a Crop Process.
The following buttons are enables to use within the operations list area:
Button Action Alternate Access
Sync Process
Update the table with the current information from the crop cycle.
Details
View selected records in a vertical column format in a separate window.
Find
Find a term within the items table. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Filter
Chose the records to be displayed. The filter can be associated to each column from the table.
Total
Summarize the values for the selected column. This option is enabling only for valuated columns.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
31
Subtotals
There is possible to create subtotals in one or more columns in the list that are not value columns. The prerequisite is to have stablished a total value for a least one column.
Export
Export the entire contents of the items table to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
Quality Characteristics Tab
The quality tab allows to add the inspection characteristic which will be inspected during the fruit reception. This tab has a table with the next columns:
Columns Description
Master Characteristics Inspection characteristic code. The data source to list comes from
the inspection plan for the material, the crop master and
agreements.
Short Text Description for the Master Characteristic
Quality Characteristics Tab
The following buttons are enables to use within the quality tab:
Button Action Alternate Access
Create
New row to add the quality inspection characteristic from a catalog.
Delete
Delete the selected row from the items table.
Details
View the selected records in a vertical column format in a separate window.
Find
Find a term within the items table. The system highlights any cell that contains the term.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
32
Find Next
Find the next instance of a term searched for previously.
Filter
Chose the records to be displayed. The filter can be associated to each column from the table.
Total
Summarize the values for the selected column. This option is enabling only for valuated columns.
Subtotals
There is possible to create subtotals in one or more columns in the list that are not value columns. The prerequisite is to have stablished a total value for a least one column.
Export
Export the entire contents of the items table to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
Status Tab
The status tab is used to control the crop master modification using status profiles for the users. There
have two splits areas, such as at the top area, there can be include the history flowcharts objects and
the other one is used to handle the status for the crop master using approvals to change it.
Text Tab
This tab is used to add any comments about the crop master. The user must have a role with permission to do that. The screen displays a work area to include the comments.
There are enable interactive options, as the follows:
Button Action Alternate Access
Cut
Used to cut the selected comment.
Ctrl + X
Copy
Used to copy the selected comment.
Ctrl + C
Insert
Used to paste the selected comment.
Ctrl + V
Undo
Used to undo the proposed comment.
Ctrl + Z
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
33
Restore
Used to restore the proposed comment.
Ctrl + Y
Find/Replace
Find a term within the selected comment. The system
highlights any cell that contains the term.
Ctrl + F
Find Next
Find the next instance of a term searched for previously.
Ctrl + G
Save as Local File
Export the entire contents of the selected comments to
the selected document type/file type.
Notes Tab
This tab is used to add the batch number in cases when the fruit needs traceability for the further
process. The screen displays the following field:
Field Description
Crop Master Display the Crop Master code
Note Type List the previous created notes.
Entered By User who created the note.
From Date when was created the note.
Security Level Security level of the note to be viewed by other users.
The following buttons are enables to use within the Work Area:
Button Action Alternate Access
Display Note
Display the selected note.
Insert Notes
Create new notes.
Display <-> Changes
Enables to change or display the note.
Delete
Delete the selected note.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
34
Cut
Used to cut the selected note.
Copy
Used to copy the selected note.
Insert
Used to paste the selected note.
Undo
Used to undo the proposed note.
Restore
Used to restore the proposed note.
Find
Find a term within the note. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously note.
Export
Export the entire contents of the note to the selected document type/file type.
Additional Data 1 & 2 Tab
This division enable to select date for valid from. The screen displays the following fields:
Field Description
Field Description Default configured field name.
Field Value Catalog with the field names.
Description Description for the field value.
Admin Tab
This division enable to select date for valid from. The screen displays the following fields:
Field Description
Created By User who created the crop master.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
35
Created On Date on which the crop master was created.
Time The time of the day at which the crop master code was created
and stored in the system.
Changed By User who created or changed the crop master in status saved.
Changed On Date on which the crop master information was changed.
Time of Change Time when the most recent change was made.
Most Recent Notes Text notes to reference any comment during the creation,
change od closure of the fruit reception guide.
3.2.4 Procedure
➢ Creating a New Crop Master
➢ Maintaining the Crop Master
➢ Displaying the Crop Master
➢ Delete the Crop Master
Creating a New Crop Master
1. Access transaction code /AGRI/GLCMM.
2. Click on the button Display <--> Change, to enable the modification.
3. Click on the button Create, to activate the creation mode.
4. Click on the Produce type field to list the options.
5. Select the Produce type.
6. Click on the Crop field to activate it.
7. Fill up the field with the Crop master code.
8. Click on the Description field to activate it.
9. Fill up the field with the description for the new crop master.
10. Click on the button to continue.
11. Click on the General tab
12. Click on the Expected Yield field to activate it.
13. Fill up the field with the yield value and the unit.
14. Click on the Yard Material field to activate it.
15. Click on the button or press F4 on the keyboard to open a new window with the material
list.
16. Select the material from the list.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
36
17. Click on the Receiver Material field to activate it.
18. Click on the button or press F4 on the keyboard to open a new window with the material
list.
19. Select the material from the list.
20. Click on the Seed Production Material field to activate it.
21. Click on the button or press F4 on the keyboard to open a new window with the material
list.
22. Select the material from the list.
23. Click on the Plants tab
24. Click on the button Create to add a new plant.
25. Click on the button or press F4 on the keyboard to open a new window with the plants list.
26. Select the Plant from the list.
27. Click on the Valid from field to activate it.
28. Click on the button or press F4 on the keyboard to open a new window with the calendar.
29. Select the date from the calendar.
30. Click on the Valid to field to activate it.
31. Click on the button or press F4 on the keyboard to open a new window with the calendar.
32. Select the date from the calendar.
33. Click on the Crop Cycles tab
34. From the Process variants table, the steps to do are as follows:
34.1. Click on the button Create, to activate the creation mode.
34.2. Click on the Variant field to activate it.
34.3. Fill up the field with the Variant code.
34.4. Click on the Description field to activate it.
34.5. Fill up the field with the Description for the new Variant.
34.6. Click on the Process Cycle field to activate it.
34.7. Click on the button or press F4 on the keyboard to open a new window with
the process cycles list.
34.8. Select the Process Cycle from the list.
34.9. Click on the button to continue.
35. From the crop process table, the steps to do are as follows:
35.1. Click on the Material field from the table to activate it for each defined crop process.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
37
35.2. Click on the button or press F4 on the keyboard to open a new window with the Material list.
35.3. Select the Material code from the list.
35.4. Click on the Valid to field to activate it.
35.5. Click on the Minimum Interval field to activate it.
35.6. Fill up the field with time quantity.
35.7. Click on the Time unit field to activate it for each defined crop process.
35.8. Click on the button or press F4 on the keyboard to open a new window with the Units list.
35.9. Select the Unit code from the list.
35.10. Click on the Maximum Interval field to activate it.
35.11. Fill up the field with time quantity.
35.12. Click on the Time unit field to activate it for each defined crop process.
35.13. Click on the button or press F4 on the keyboard to open a new window with the
Units list.
35.14. Select the Unit code from the list.
36. Click on the Plant option list.
37. Select the plant from the list.
38. From the crop process table, the steps to do are as follows:
38.1. Click on the interval unit field to activate it per operation.
38.2. Fill up the field with time quantity.
39. Click on the Quality tab
40. Click on the button Create to add a new characteristic.
41. Click on the button or press F4 on the keyboard to open a new window with the master
characteristics list.
42. Select the Quality characteristic from the list.
43. Click on the Notes tab
44. Click on the Insert Notes button
45. Click on the Note Type option list
46. Select the note type from the list.
47. Click on the Security Level option list
48. Select the security level from the list.
49. Fill up the work area with the notes to add to the crop master.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
38
50. Click on the button Save from the top main menu, in order to store the new crop master into
the Agribusiness Database.
Maintaining the Crop Master
1. Access transaction code /AGRI/GLCMM.
2. Click on the button Display <--> Change, to enable the modification.
3. Click on the button Search, to open the searching options screen.
4. Click on selected fields to activate ones, in order to make the searching.
5. Click on the button or press F4 on the keyboard to open a new window with the data
element list.
6. Fill in with desired values.
7. Click on the button to execute the searching.
8. Click on the Crop field from the search tab to display the guide information is the Work area.
9. Only can be changed the information in the enable fields.
10. Once changed the values, click on the button to save the crop master.
11. Click on the button to close the pop up confirmation message.
Displaying the Crop Master
1. Access transaction code /AGRI/GLCMM.
2. Click on the button Search, to open the searching options screen.
3. Click on selected fields to activate ones, in order to make the searching.
4. Click on the button or press F4 on the keyboard to open a new window with the data
element list.
5. Fill in with desired values.
6. Click on the button to execute the searching.
7. Click on the Crop field from the search tab to display the guide information is the Work area.
8. There can be displayed any tab whenever the user wants.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
39
Deleting the Crop Master
1. Access transaction code /AGRI/GLCMM.
2. Click on the button Display <--> Change, to enable the modification.
3. Click on the button Search, to open the searching options screen.
4. Click on Status field to activate it.
5. Click on the button or press F4 on the keyboard to open a new window with the data element list.
6. Select the desired values.
7. Click on the button to execute the searching.
8. Click on the Crop code from the search tab to display the Crop Master information in the Work area.
9. Click on the delete button, to delete the selected guide.
10. Click on the button, to confirm the deletion.
3.3 Crop Seasons
3.3.1 Definition
Crop Season for Vistex Agribusiness Suite allows to assign the crop type or crop types/varieties that
will be sowed in a terrain during a period, using a agricultural treatment.
3.3.2 Access
Transaction code: /AGRI/GLFLCA
3.3.3 Structure
The Crop seasons is a grid which allows to do multiple functionalities. Following button appears on
the screen.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
40
Search:
Button Action
Search
View the search criteria screen. Enter the search criteria, and then click on
the Execute button to perform the search.
NOTE: Search results are not retained when you leave the transaction.
Search More
After you perform a search, use Search More to retain the results from the previous search, perform a new search, and append the new results to the list already displayed.
Display ↔ Change
Toggle between Display mode and Change mode.
Worklist:
The following buttons appear in the Worklist:
Button Action
Crop Seasons Details
View selected records in a vertical column format in a separate window.
Process Cycle assigned to the selected crop seasons
Check if any errors in the added crop seasons
Process flow of the selected Crop seasons – List of Processes with orders created
Display Measurement Documents for the selected Crop seasons
Create Crop seasons
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
41
Delete/Undo Delete Crop seasons
Extend in case of Ratoons scenario
Create the following:
WBS Element
Yard Order
Measurement Document
Crop seasons Close
Activate Crop seasons
Set Values
Calculate End date
Column to Row Shuffle
Details
View selected records in a vertical column format in a separate window.
Sort in Ascending Order
Sort the data in a selected column in ascending alphanumeric sequence.
Sort in Descending Order
Sort the data in a selected column in descending alphanumeric sequence.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation
(Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
42
If you used the Total button to calculate the total for a selected column, you
also may have the system calculate subtotals. Click to view a dialog window. In
that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
3.3.4 Procedure
➢ Creating Crop seasons
➢ Maintaining Crop seasons
➢ Displaying Crop seasons
➢ Deleting Crop seasons
Create Cropseasons
1.9. Access transaction code /AGRI/GLFLCA
1.10. Select “Display <-> Change” button
1.11. To add one/multiple line item, click on “Create” button and enter the following
information
• Terrain
• Crop
• Variant
• Season
• Year
1.12. Click on “Continue” button and “Save” button
1.13. Crop seasons will be created
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
43
Maintaining Cropseasons
1. Access transaction code /AGRI/GLFLCA
2. Click on the button Display <--> Change, to enable the change
3. Click on the button Search, to open the searching options screen
4. Enter the Terrain Id or required selection to get the crop seasons to be changed
5. Do the required changes and save
Displaying Cropseasons
1. Access transaction code /AGRI/GLFLCA.
2. Click on the button Search, to open the searching options screen.
3. Click on selected fields to activate ones, in order to make the searching.
Deleting Cropseasons
1. Access transaction code /AGRI/GLFLCA.
2. Click on the button Display <--> Change, to enable the modification.
3. Click on the button Search, to open the searching options screen. 4. Enter the Terrain Id or required selection to get the Crop seasons to be deleted
5. Click on button and select delete
6. Click on “Save” button 7. Crop seasons will be set to deletion flag
3.4 Attribute Workbench
3.4.1 Definition
An Attribute is a characteristic that describes the properties of objects. The attributes can be grouped
in attributes groups.
3.4.2 Access
Transaction code: /AGRI/GLATM
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
44
3.4.3 Structure
The information is organized into the following:
• Header
• General
• Values
• Keywords
• Additional Data; extra tabs that can hold additional fields programmed to appear
• Admin Data
NOTE: Functions accessed from the menu bar apply only to the Attribute displayed in focus in the Work
Area and do not apply to the data in the Search and Worklist.
IMPORTANT: Because Vistex software is extremely versatile, the user screen may be customized. As
a result, the screen may appear different from the standard screen described in this document.
3.4.4 Procedure
➢ Creating an Attribute
➢ Displaying an Attribute
➢ Deleting an Attribute
Creating an Attribute
1. Access transaction code /AGRI/GLATM
2. Press change button then Click on the Create button to display the Create Attribute
Main Screen.
3. On Header part, enter the Attribute Name, Description, Attribute Group Category and Status.
4. On General tab, fill the fields that applies for the attribute on creation process, at least:
Grouping, Data type, Number of chars, decimal places and Unit.
5. On Values tab, enter the values (if applies) for the attribute. Remember, it can be specific value
list, refers to a table-field, or no specific values.
6. Click on Save button and the Attribute will be created.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
45
Displaying an Attribute
1. Access transaction code /AGRI/GLATM.
2. In the Search Button, perform a search. Click on the option Attribute Name and choose
one option from the match code to display the attribute created in the system.
Note: Also, you can use additional fields to search like Attribute Group Category and
description.
3. Click on the Attribute name to display the information assigned to it.
Deleting an Attribute
1. Display the Attribute.
2. Click on the Display ↔ Change button to activate Change mode.
3. From the menu bar, select Attribute → Delete.
4. In the Confirm Action dialog window select Yes to confirm the delete.
3.5 Attribute Group Workbench
3.5.1 Definition
An Attribute group is used to manage a large number of attributes, group this according to particular
features.
3.5.2 Access
Transaction code: /AGRI/GLAGM
3.5.3 Structure
The information is organized into the following:
• Header
• Basic Data
• List of Assigned Attributes
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
46
NOTE: Functions accessed from the menu bar apply only to the Attribute group displayed in focus in
the Work Area and do not apply to the data in the Search and Worklist.
IMPORTANT: Because Vistex software is extremely versatile, the user screen may be customized. As
a result, the screen may appear different from the standard screen described in this document.
3.5.4 Procedure
➢ Creating an Attribute group
➢ Displaying an Attribute group
➢ Deleting an Attribute group
Creating an Attribute group
1. Access transaction code /AGRI/GLAGM
2. Press change button then Click on the Create button to display the Create Attribute
Group Main Screen.
3. On Header part, enter the Attribute Group Name, Description, Attribute Group Category and
Status.
NOTE: If the Attribute Group Category selected is Measurement Point (MP), it is required to
enter: Measurement Level and Measurement Document Type.
4. On List of Assigned Attributes part, enter the attribute(s) to be grouped.
5. Click on Save button and the Attribute Group will be created.
Displaying an Attribute group
1. Access transaction code /AGRI/GLAGM.
2. In the Search Button, perform a search. Click on the option Attribute Group and choose one option from the match code to display an Attribute Group created in the system.
NOTE: Also, you can use additional fields to search like Attribute Group Category (MP) and description.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
47
3. Click on the Attribute Group Name to display the information assigned to it.
Deleting an Attribute group
1. Display the Attribute Group.
2. Click on the Display ↔ Change button to activate Change mode.
3. Click on the Delete button.
Alternately, from the menu bar, select Attribute Group → Delete.
4. In the Confirm Action dialog window select Yes to confirm the delete.
3.6 Status Profile Workbench
3.6.1 Definition
Use the Status Profile Workbench to select an existing SAP status profile that will be attached to a
new Vistex status profile of the same name. Selection of an SAP status profile in this workbench flags
the system to use Vistex status flow.
The statuses from the SAP status profile will appear on the Statuses tab. If the SAP status profile was
assigned an object type in the following configuration, that object type appears in the header of that
workbench.
The Vistex status profile contains a list of triggers, each of which starts the status flow it is linked to. For
example, you might attach one trigger to the standard flow and another trigger to an abbreviated flow.
As needed, an authorized user can manually change the trigger in the Status tab of the object
workbench to redirect the approval process from one flow to another. Business Script functionality also
can be used to change triggers conditionally.
Create any number of triggers and list them on the Flow tab. One trigger must be set as the default,
and all must be flagged as a User Entry. To attach a status flow to each trigger, either select from the
list of existing status flows or navigate to the Status Flow Workbench to create a new status flow.
3.6.2 Access
Transaction code: /IRM/GSPM
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
48
3.6.3 Structure
The Status Profile Workbench screen is organized into the following areas:
• Search and Worklist
Use the Search and Worklist to view selected profiles in a grid format. From the grid, click on
a status profile number to display that profile in focus in the Work Area.
• Work Area
Use the Work Area to maintain one status profile. In the standard Vistex implementation, the
Work Area contains the following tabs:
• Flow
• Statuses
• Admin Data
NOTE: Functions accessed from the menu bar apply only to the status profile displayed in focus in the
Work Area and do not apply to the data in the Search and Worklist.
IMPORTANT: Because Vistex software is extremely versatile, the user screen may be customized. As
a result, the screen may appear different from the standard screen described in this document.
3.6.3.1 Search and Worklist
When you enter the transaction, the Search and Worklist appears in the left side of the screen, with
the Search tab active.
The Search and Worklist initially appears collapsed but can be resized horizontally. As needed, use
the following buttons (located above the Search and Worklist) to adjust the Search and Worklist:
Button Action Alternate Access
Display ↔ Hide Worklist
Toggle between displaying and hiding the Search and Worklist.
F6 or
Menu bar: Environment → Display ↔ Hide Worklist
Minimize Worklist
Partial screen view of Search and Worklist.
Shift+F6 or
Menu bar: Environment → Minimize Worklist
Maximize Worklist
Full screen view of Search and Worklist.
Shift+F7 or
Menu bar: Environment → Maximize Worklist
The Search and Worklist contains the following tabs:
• Search
• Worklist
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
49
Click on a tab to activate it (the active tab name will be shown as white text in a dark background). In
the tab name, the number in parentheses indicates the number of displayed lines.
Search Tab:
Use the Search tab to locate and list status profiles. Search results appear in a grid that can be sorted
and searched.
The following buttons appear in the Search tab:
Button Action
Search
Click to view the search criteria screen. Enter the search criteria, and
then click on the Execute button to perform the search.
NOTE: Search results are not retained when you leave the transaction.
Search More
After you perform a search, use Search More to retain the results from the previous search, perform a new search, and append the new results to the list already displayed.
Add to Favorites
Copy selected records from the search results to your Favorites group (on the Worklist tab) to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Favorites button to copy the lines to the Favorites group on the Worklist tab.
Add to Worklist
Copy selected records from the search results to the Worklist tab to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Worklist button. Select an existing group from the Move to Group dropdown list, or create a new group to which the items will be copied.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
50
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window. In that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
Worklist Tab
Use the Worklist tab to list the status profiles currently assigned to your worklist. Worklist entries appear
in a grid format that can be sorted and searched.
The following buttons appear in the Worklist tab:
Button Action
Add to Favorites
Copy selected records from the search results to your Favorites group (on the Worklist tab) to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Favorites button to copy the lines to the Favorites group on the Worklist tab.
Move to Group
Create a group for selected status profiles, move selected status profiles to an existing group or Favorites, or rename groups.
Delete
Delete selected status profiles from Favorites or other Worklist group.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
51
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window. In that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
3.6.3.2 Work Area
The following buttons above the Work Area apply to the Status Profile displayed in focus:
Button Action Alternate Access
Display ↔ Change
Toggle between Display mode and Change mode.
Shift+F12 or
Menu bar: Status Profile → Display ↔ Change
Create
Create a new status profile.
F5 or
Menu bar: Status Profile → Create
Delete (Change mode only)
Delete the status profile displayed in the Work Area.
Shift+F2 or
Menu bar: Status Profile → Delete
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
52
The Work Area contains the following sections:
• Status Profile Header
• Status Profile Tabs
Status Profile Header:
The following fields appear in the header:
Field Description
Status Profile Name and alphanumeric identifier of the SAP status profile, selected from a dropdown list.
Object Category Displays the identifier for the object category linked to the profile in the Status Profile field. The name of the first object type in the category appears next to the field.
Click on the icon to view the list of object types assigned to the object category.
Status Profile Tabs:
The following tabs appear in the standard implementation:
• Flow
• Statuses
• Admin Data
Status Profile (Change mode only)
Transfer to configuration to view or maintain an-SAP status profile.
Shift+F8
Transport
Create a transport request.
Creating/maintaining a Vistex status profile is not an IMG activity. You can transport the status profile if needed, but creating a transport is not required.
Ctrl+F6
Script
Create a business script/formula.
Ctrl+F10
Delete Script (Change mode only - when a script exists)
Delete the existing script for the status profile displayed in the Work Area.
Ctrl+F9
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
53
Flow Tab
Use the Flow tab to list each status profile trigger and attach status flows to that trigger. The tab is
organized into two sections:
➢ Trigger used to list the trigger(s) in the status profile.
➢ If multiple triggers are listed, one must be flagged as the default.
➢ All triggers must be flagged for user entry.
➢ Status Flows for Trigger used to list the status flow(s) attached to a trigger. Each trigger must
be assigned a status flow.
NOTE: You may need to deactivate multiple flows if the trigger can be called from multiple
steps, such as approve and reject.
Trigger:
The following buttons appear above the grid:
Button Action
Delete (Change mode only) Deletes the selected step.
Find Find a term within the grid values. The system highlights any cell that contains the term.
Find Next Find the next instance of a term searched for previously.
Set Filter Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns) Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used) If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window. In that window, check the checkbox of the column used to calculate subtotals.
Export Export the entire contents of the grid area to the selected document type/file type.
Choose Layout Choose, change, save, and manage column layouts within the ALV grid.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
54
The following fields appear in the grid:
Field Description
Trigger Trigger number. Click on the link to view and maintain the list of status flows for that trigger.
Description Description of the trigger.
Default Check the checkbox only for the first trigger to be used (default trigger).
User Entry Checkbox must be checked for all the triggers.
Status flow for Trigger:
The following buttons appear above the grid:
Button Action
Display Transfer to Status Flow Workbench to display the status flow.
Change (Change mode only) Transfer to Status Flow Workbench to maintain the status flow.
Create (Change mode only) Transfer to Status Flow Workbench to create a status flow for the trigger.
Delete (Change mode only) Deletes the selected status flow.
Find Find a term within the grid values. The system highlights any cell that contains the term.
Find Next Find the next instance of a term searched for previously.
Set Filter Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns) Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used) If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window. In that window, check the checkbox of the column used to calculate subtotals.
Export Export the entire contents of the grid area to the selected document type/file type.
Choose Layout Choose, change, save, and manage column layouts within the ALV grid.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
55
The following fields appear in the grid:
Field Description
Status Flow List the status flows affected by the trigger. If the trigger starts the initial flow, only list that flow. If the trigger stops one flow and starts another, list both flows: activate the new flow and deactivate the previous flog. To select a status flow, either:
• Select it from the list of existing status flows
• Create a new status flow. A status flow may be created from
this tab (click on the Create button) or directly at the Status Flow Workbench level.
Activate/Deactivate Assign a code to each status flow. Options:
• Activate
• Deactivate Multiple status flows can be assigned to each trigger, and the defined flows can be set to activate or deactivate, as required. Status flows not used in the specified trigger need to be deactivated to prevent any interference between the active status flow and the inactive status flows.
Activity Completion Reason
If configured, you may select an activity completion reason code from the dropdown list to explain why the flow was deactivated.
Statuses Tab
The Statuses tab is organized into two panes:
• Left pane, which lists the user statuses created in SAP IMG that are attached to the Vistex
status profile
• Right pane, which lists the business transactions assigned to that user status. This pane
appears when you click on a status.
The following buttons appear above the grid:
Button Action
Find Find a term within the grid values. The system highlights any cell that contains the term.
Find Next Find the next instance of a term searched for previously.
Set Filter Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns) Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used) If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
56
In that window, check the checkbox of the column used to calculate subtotals.
Export Export the entire contents of the grid area to the selected document type/file type.
Change Layout Filter, sort, and change column design.
The following fields appear in the tab:
Field Description
Status Number Number used to indicate the sequence of the user statuses in the Vistex status profile. The status number is blank in the SAP status profile.
Status Name SAP user status name. Click on the link to view a list of business transactions that are assigned the user status. For each listed business transaction, a series of radio buttons indicates whether the transaction is allowed, displays a warning, or is not allowed.
User Status User status sequence number.
Status Short text of the SAP user status.
Initial status The letter X appears if the status is the initial status; otherwise the field is blank.
Authorization key User statuses may be assigned an authorization key. If assigned, the system will check the user's authorization when a user status is set or deleted.
Admin Tab
The Admin Data tab uses standard SAP functionality. The tab displays information regarding who
created and changed the information for this transaction and when the creation and most recent
changes occurred.
The Most Recent Notes section of the tab displays comments from the Notes tab.
The following fields appear in the Creation section of the tab:
Field Description
Created By User ID of the author of the original record.
Created on Date the record was created.
Time Time the document was created.
The following fields appear in the Most Recent Change section of the tab:
Field Description
Changed By User who last changed the document.
Changed on Date the document was changed.
Time of Change Time the document was changed.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
57
3.6.4 Procedure
➢ Displaying a Status Profile
➢ Creating a Status Profile
➢ Maintaining a Status Profile
➢ Deleting a Status Profile
Displaying a Status Profile
1. Access transaction code /IRM/GSPM.
2. In the Search and Worklist, perform a search or display your worklist. Click on a status profile
name to display that status profile in focus in the Work Area.
Creating a Status Profile
1. Access transaction code /IRM/GSPM.
2. Click on the Display ↔ Change button to activate Change mode.
3. Click on the Create button.
4. In the Status Profile field, select an SAP status profile from the dropdown list. The system
populates the Object Category, based on the status profile you selected.
5. Access the flow tab. On the tab, list each trigger. Flag each as a User Entry, and flag one as
the Default (first) trigger.
6. For each trigger, at the bottom of the Flow tab assign a status flow to the trigger.
NOTE: To create a status flow for a trigger, select the trigger and click on the Create
button. The system transfers to the Status flow workbench.
7. Save the status profile.
Maintaining a Status Profile
1. Access transaction code /IRM/GSPM.
2. In the Search and Worklist, perform a search or display your worklist. Click on a status profile
name to display that status profile in focus in the Work Area.
3. Click on the Display ↔ Change button to activate Change mode.
4. Enter the changes, as needed, and save the changes.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
58
5. To view/change the corresponding SAP status profile, click on the Status Profile
button.
NOTE: All changes take effect on new objects; already created objects will not be changed.
Deleting a Status Profile
1. Access transaction code /IRM/GSPM.
2. In the Search and Worklist, perform a search or display your worklist. Click on a status profile
name to display that status profile in focus in the Work Area.
3. Click on the Display ↔ Change button to activate Change mode.
4. Click on the Delete button.
Alternately, from the menu bar, select Status Profile → Delete.
5. In the Confirm Action dialog window select Yes to confirm the delete.
NOTE: If no profile exists, standard SAP flow will be used on all new objects. Existing objects will not
be changed.
3.7 Status Flow Workbench
3.7.1 Definition
Use the Status Flow Workbench to create and maintain the list of the steps (and their possible
outcomes) in a status flow. Outcomes define the next steps and activities triggered when the step is
reached. Status flows are assigned to triggers in a status profile that is assigned to an object type, such
as an agreement type or Crop type or Terrain.
3.7.2 Access
Transaction code: /IRM/GSFM.
Enter this transaction directly or from the Status Profile Workbench.
3.7.3 Structure
The Status Profile Workbench screen is organized into the following areas:
• Search and Worklist
Use the Search and Worklist to view selected profiles in a grid format. From the grid, click on
a status profile number to display that profile in focus in the Work Area.
• Work Area
Use the Work Area to maintain one status profile. In the standard Vistex implementation, the
Work Area contains the following tabs:
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
59
• Steps
• Statuses
• Admin Data
NOTE: Functions accessed from the menu bar apply only to the status profile displayed in focus in the
Work Area and do not apply to the data in the Search and Worklist.
IMPORTANT: Because Vistex software is extremely versatile, the user screen may be customized. As
a result, the screen may appear different from the standard screen described in this document.
3.7.3.1 Search and Worklist
When you enter the transaction, the Search and Worklist appears in the left side of the screen, with
the Search tab active.
The Search and Worklist initially appears collapsed but can be resized horizontally. As needed, use
the following buttons (located above the Search and Worklist) to adjust the Search and Worklist:
Button Action Alternate Access
Display ↔ Hide Worklist
Toggle between displaying and hiding the Search and Worklist.
F6 or
Menu bar: Environment → Display ↔ Hide Worklist
Minimize Worklist
Partial screen view of Search and Worklist.
Shift+F6 or
Menu bar: Environment → Minimize Worklist
Maximize Worklist
Full screen view of Search and Worklist.
Shift+F7 or
Menu bar: Environment → Maximize Worklist
The Search and Worklist contains the following tabs:
• Search
• Worklist
Click on a tab to activate it (the active tab name will be shown as white text in a dark background). In
the tab name, the number in parentheses indicates the number of displayed lines.
Search Tab:
Use the Search tab to locate and list status profiles. Search results appear in a grid that can be sorted
and searched.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
60
The following buttons appear in the Search tab:
Button Action
Search
Click to view the search criteria screen. Enter the search criteria, and
then click on the Execute button to perform the search.
NOTE: Search results are not retained when you leave the transaction.
Search More
After you perform a search, use Search More to retain the results from the previous search, perform a new search, and append the new results to the list already displayed.
Add to Favorites
Copy selected records from the search results to your Favorites group (on the Worklist tab) to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Favorites button to copy the lines to the Favorites group on the Worklist tab.
Add to Worklist
Copy selected records from the search results to the Worklist tab to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Worklist button. Select an existing group from the Move to Group dropdown list, or create a new group to which the items will be copied.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
61
window. In that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
Worklist Tab
Use the Worklist tab to list the status profiles currently assigned to your worklist. Worklist entries
appear in a grid format that can be sorted and searched.
The following buttons appear in the Worklist tab:
Button Action
Add to Favorites
Copy selected records from the search results to your Favorites group (on the Worklist tab) to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Favorites button to copy the lines to the Favorites group on the Worklist tab.
Move to Group
Create a group for selected status flows, move selected status flows to an existing group or Favorites, or rename groups.
Delete
Delete selected status flows from Favorites or other Worklist group.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
62
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window. In that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
3.7.3.2 Work Area
The following buttons above the Work Area apply to the Status flow displayed in focus:
Button Action Alternate Access
Display ↔ Change
Toggle between Display mode and Change mode.
Shift+F12 or
Menu bar: Status Profile → Display ↔ Change
Create
Create a new status profile.
F5 or
Menu bar: Status Profile → Create
Delete (Change mode only)
Delete the status profile displayed in the Work Area.
Shift+F2 or
Menu bar: Status Profile → Delete
Status Profile (Change mode only)
Transfer to configuration to view or maintain an SAP status profile.
Shift+F8
Transport
Create a transport request.
Creating/maintaining a Vistex status profile is not an IMG activity. You can transport the status profile if needed, but creating a transport is not required.
Ctrl+F6
Script
Create a business script/formula.
Ctrl+F10
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
63
The Work Area contains the following sections:
• Status Flow Header
• Status Flow Tabs
Status Flow Header:
The following fields appear in the header:
Field Description
Status Profile Name and alphanumeric identifier of the SAP status profile, selected from a dropdown list.
Object Category Displays the identifier for the object category linked to the profile in the Status Profile field. The name of the first object type in the category appears next to the field.
Click on the icon to view the list of object types assigned to the object category.
Status Flow Tabs:
The following tabs appear in the standard implementation:
• Steps
• Preview, which displays a graphical representation of the flow (if Step Style is selected for
each step).
• Statuses
• Script, which indicates whether or not a Step and/or Outcome business script exists. Step
scripts are used to skip approval steps; Outcome scripts are used to select an outcome. Click
on the Create icon to create a script, Maintain icon to change the existing script,
and Delete icon to delete the existing script.
• Admin Data
Delete Script (Change mode only - when a script exists)
Delete the existing script for the status profile displayed in the Work Area.
Ctrl+F9
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
64
Steps
Use the Steps tab to list each status flow step and its outcomes. The tab is organized into two sections:
• Flow Steps
• Outcomes for Step
Flow Steps
The following buttons appear above the grid:
Button Action
Delete (Change mode only)
Deletes the selected step.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window. In that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
65
The following fields appear in the grid:
Field Description
Step Identifier assigned to the step.
Click on the step ID to view the Outcomes information for that step.
Description Description of the step.
Long Text Click on the icon to enter text in multiple languages. The system language is used as the initial language.
Level Assign a numeric level to each step. The level numbers are unique for each step, except for when parallel steps are used.
Example: Two managers must approve an agreement before it can be sent to the director. The level number for the two manager steps must be the same.
Description Description of the level.
In UI (Fiori) applications, the level descriptions are displayed at the top of the screen, with steps listed as pages.
If multiple steps are assigned the same level, then the Description field will be enabled for only the first step; the Description field will be disabled for the remaining steps assigned that same level.
Start Check the checkbox of the first step in the flow. One of the steps in the flow must be checked.
End (Optional) If a formal final step is needed, check the checkbox of the final step in the flow.
If no step is flagged as the end step, the system assumes that the last step is the final if it has no assigned outcomes.
Status Selected status from the dropdown list of user statuses that are available for the status profile attached to the status flow. The field value is a combination of the SAP status identifier and short text.
Available statuses are listed on the Statuses tab.
Activities Click on the icon to enter information in the User Statuses dialog window. Information in the window links the flow step to the activity and activity template.
Activities can be assigned at either the Flow Step level (upper grid) or at the Outcome level (lower grid).
Step Style To view a graphical representation of the flow on the Preview tab, assign a style from the dropdown list.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
66
Outcomes for Steps:
The following buttons appear above the grid:
Button Action
Display
Transfer to Status Flow Workbench to display the status flow.
Change (Change mode only)
Transfer to Status Flow Workbench to maintain the status flow.
Create (Change mode only)
Transfer to Status Flow Workbench to create a status flow for the trigger.
Delete (Change mode only)
Deletes the selected status flow.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window. In that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
67
The following fields appear in the grid:
Field Description
Outcome Name of the outcome.
Outcomes must be defined for each status flow step. Outcomes define the next steps and activities triggered when the particular step is reached.
Description Description of the outcome.
Long Text Click on the icon to create text in multiple languages. The system language is used as the initial language.
User Entry Check the checkbox for each outcome.
Step Enter the next step in the flow.
Next Steps If assigning multiple parallel next steps to this outcome, click on the icon to display the More Flow Steps pop-up used to enter the multiple next steps.
• The multiple steps must be assigned the same level (Level field in the upper grid).
• All parallel steps must be approved before the system advances to the next sequential step.
Status Click on the icon to view/maintain the user status information for the outcome, including activity assignment and setting the SAP status.
Activities can be assigned at either the Flow Step level (upper grid) or at the Outcome level (lower grid).
Auto Check to enable the Set Auto Outcome function.
To use Set Auto Outcome:
• Check the Auto checkbox. Only one outcome in a step can be set as automatic.
• Enter the amount of time (Time Unit and Time Interval), after which the item is flagged to have the system set the outcome.
• Run the Activity Mass Process report, with the Set Auto Outcome option selected, to automatically set all the outcomes that were flagged. Alternately, run mass processing for Set Auto Outcome in the Activities Workbench.
Time Unit Appears only when Set Auto Outcome is enabled.
Select a time unit. Options:
• Days
• Hours
• Minutes
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
68
Time Interval Appears only when Set Auto Outcome is enabled.
Enter the number of days/hours/minutes after which the outcome will be flagged for the system to set that outcome automatically.
Statuses Tab
The Statuses tab is organized into two panes:
• Left pane, which lists the user statuses created in SAP IMG that are attached to the Vistex
status profile
• Right pane, which lists the business transactions assigned to that user status. This pane
appears when you click on a status.
The following buttons appear above the grid:
Button Action
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window. In that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Change Layout
Filter, sort, and change column design.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
69
The following fields appear in the tab:
Field Description
Status Number Number used to indicate the sequence of the user statuses in the Vistex status profile. The status number is blank in the SAP status profile.
Status Name SAP user status name.
Click on the link to view a list of business transactions that are assigned the user status. For each listed business transaction, a series of radio buttons indicates whether the transaction is allowed, displays a warning, or is not allowed.
User Status User status sequence number.
Status Short text of the SAP user status.
Initial status The letter X appears if the status is the initial status; otherwise the field is blank.
Authorization key User statuses may be assigned an authorization key. If assigned, the system will check the user's authorization when a user status is set or deleted.
Admin Tab
The Admin Data tab uses standard SAP functionality. The tab displays information regarding who
created and changed the information for this transaction and when the creation and most recent
changes occurred.
The Most Recent Notes section of the tab displays comments from the Notes tab.
The following fields appear in the Creation section of the tab:
Field Description
Created By User ID of the author of the original record.
Created on Date the record was created.
Time Time the document was created.
The following fields appear in the Most Recent Change section of the tab:
Field Description
Changed By User who last changed the document.
Changed on Date the document was changed.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
70
Time of Change Time the document was changed.
3.7.4 Procedure
➢ Displaying a Status Flow
➢ Creating a Status Flow
➢ Copying a Status Flow
➢ Maintaining a Status Flow
➢ Deleting a Status Flow
Displaying a Status Flow
2. Access transaction code /IRM/GSFM.
3. In the Search and Worklist, perform a search or display your worklist. Click on a status profile
name to display that status profile in focus in the Work Area.
Creating a Status Flow
1. Access transaction code /IRM/GSFM.
2. Click on the Display ↔ Change button to activate Change mode.
3. Click on the Create button.
4. Enter an alphanumeric identifier in the Status Flow field. Enter a value in the Description field.
In the Status Profile field, select a profile from the dropdown list.
5. Display the Steps tab.
6. For the first step, enter a step number, description, level, and status. Set the Default flag.
Press ENTER.
7. Click on the icon in the Long Text field to create text in multiple languages. The system
language is used as the initial language.
8. Click on the icon in the Activities field to display the User Statuses dialog window, which is
used to link each activity and activity template to the flow step, as well as to list processors for
the flow step.
Information in the window tells the system to, for this step, use the specified activity template
to create an activity of the selected type and medium, and send it to the listed processors.
9. Enter a Step Style if you will be creating a graphical representation of the flow.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
71
10. Click on the link in the Flow Step field to enter outcomes for that step. For each outcome, click
on the icon in the Status field to assign activities as needed, and to set the
Activate/Deactivate status.
11. Enter the remaining steps, as needed, and their outcomes.
12. Save the status flow.
Copying a Status Flow
1. Access transaction code /IRM/GSFM.
2. In the Search and Worklist, perform a search or display your worklist. Click on a status flow
number to display that status flow in focus in the Work Area.
3. Click on the Display ↔ Change button to activate Change mode.
4. Click on the Copy button.
5. In the Copy Status Flow pop-up enter the name and description. In the Status Profile field,
select the corresponding status profile.
You may select a different status profile than the one assigned to the copy from status flow.
Only steps and outcomes will be copied, not the activities.
6. Click on to create the status flow.
7. Enter changes, as needed.
8. Save the new status flow.
Maintaining a Status Flow
1. Access transaction code /IRM/GSFM.
2. In the Search and Worklist, perform a search or display your worklist. Click on a status flow
identifier to display that status flow in focus in the Work Area.
6. Click on the Display ↔ Change button to activate Change mode.
7. Enter the changes, as needed, and save the changes.
8. To view/change the corresponding SAP status profile, click on the Status Profile
button.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
72
Deleting a Status Flow
1. Access transaction code /IRM/GSFM.
2. In the Search and Worklist, perform a search or display your worklist. Click on a status flow
number to display that status flow in focus in the Work Area.
3. Click on the Display ↔ Change button to activate Change mode.
4. Click on the Delete button.
Alternately, from the menu bar, select Status Flow → Delete.
5. In the Confirm Action dialog window select Yes to confirm the delete.
NOTE: If the status flow had not been transported, a message will appear asking if you want to
transport before the status flow is deleted.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
73
4 Farm Management
A core component of the Vistex enterprise-class Agribusiness Suite, the Farm Management module
is a comprehensive and integrated business solution designed specifically for agro-industrial
companies, and to support the full life cycle of farm management operations. From planning and
planting, to growing and harvesting, Farm Management combines the day-to-day needs of field
managers, supervisors and workers with the analytical requirements of senior management.
▪ POWERFUL integrated solution to centralize ALL Farm Management processes
4.1 Farming Process
4.1.1 Definition
The Farming Process Work Bench is used to create and release agricultural process orders at terrain
level by crop and variant. This setup gives the user a full view of all the planned tasks required to
complete an agricultural process for each of the terrains. Simultaneously task orders can be created,
confirmed and technically complete. Additional to this flexibility the user may create unplanned orders
within the process when required due to unexpected events might take place in a normal agricultural
production process.
Master data that allows the processes to take place are materials, terrains, crop master, crop cycle,
crop season and variants.
FARM Management Is for the growers to operate the farm
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
74
4.1.2 Access
FARMING PROCESS Transaction code: /AGRI/FMFPM
4.1.3 Structure
The Farming Process Workbench screen is organized into the following areas:
• Search and Worklist
Use the Search and Worklist to view selected process order in a grid format. From the grid,
click on farming process order to display that process order in focus in the Work Area.
• Work Area
Use the Work Area to maintain Farming process order. In the standard Vistex
Implementation, the Work Area contains the following tabs:
4.1.3.1 Search and Worklist
When you enter the transaction, the Search and Worklist appears in the left side of the screen, with
the Search tab active.
The Search and Worklist initially appears collapsed but can be resized horizontally. As needed, use
the following buttons (located above the Search and Worklist) to adjust the Search and Worklist:
Button Action Alternate Access
Display ↔ Hide Worklist
Toggle between displaying and hiding the Search and Worklist.
F7 or
Menu bar: Environment → Display ↔Hide Worklist
Minimize Worklist
Partial screen view of Search and Worklist.
F8 or
Menu bar: Environment → Minimize Worklist
Maximize Worklist
Full screen view of Search and Worklist.
F9 or
Menu bar: Environment → Maximize Worklist
Worklist ↔ Calendar
Toggle between displaying the Search and Worklist and the Calendar view.
Shift+F9
The Search and Worklist contains the following tabs:
• Search
• Worklist
Click on a tab to activate it (the active tab name will be shown as white text in a dark background). In
the tab name, the number in parentheses indicates the number of displayed lines.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
75
Search Tab
Use the Search tab to locate and list of process orders. Search results appear in a grid that can be
sorted and searched.
The following buttons appear in the Search tab:
Button Action
Search
View the search criteria screen. Enter the search criteria, and then click on
the Execute button to perform the search.
NOTE: Search results are not retained when you leave the transaction.
Search More
After you perform a search, use Search More to retain the results from the previous search, perform a new search, and append the new results to the list already displayed.
Technically complete (Change mode only; post search)
Select the process order to change, then click on the button to display a selection menu. Options:
• Next Process Steps
• Release to next process
• Technically complete
• Revoke Technical completion
Add to Favorites
Copy selected records from the search results to your Favorites group (on the Worklist tab) to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Favorites button to copy the lines to the Favorites group on the Worklist tab.
Add to Worklist
Copy selected records from the search results to the Worklist tab to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Worklist button. Select an existing group from the Move to Group dropdown list or create a new group to which the items will be copied.
Details
View selected records in a vertical column format in a separate window.
Sort in Ascending Order
Sort the data in a selected column in ascending alphanumeric sequence.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
76
Sort in Descending Order
Sort the data in a selected column in descending alphanumeric sequence.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you
also may have the system calculate subtotals. Click to view a dialog window. In
that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
Worklist Tab
Use the Worklist tab to list the agreements currently assigned to your worklist. Worklist entries appear in a grid format that can be sorted and searched.
The following buttons appear in the Worklist tab:
Button Action
Add to Favorites
Copy selected records from the search results to your Favorites group (on the
Worklist tab) to access those records each time you enter the transaction,
without performing a search.
From the search results, select one or more lines, and then click on the Add to
Favorites button to copy the lines to the Favorites group on the Worklist tab.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
77
Move to Group
Create a group for selected, move selected to an existing group or Favorites, or
rename groups.
Delete
Delete selected process order from Favorites or other Worklist group.
Details
View selected records in a vertical column format in a separate window.
Sort in Ascending Order
Sort the data in a selected column in ascending alphanumeric sequence.
Sort in Descending Order
Sort the data in a selected column in descending alphanumeric sequence.
Find
Find a term within the grid values. The system highlights any cell that contains
the term.
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column
filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation
(Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you
also may have the system calculate subtotals. Click to view a dialog window. In
that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file
type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the
Search and Worklist.
4.1.3.2 Work Area
The following buttons above the Work Area apply to the Process Order displayed in focus:
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
78
Button Action Alternate Access
Display ↔ Change
Toggle between Display mode and Change mode.
F6 or
Menu bar: Farm Process → Display ↔Change
Create (Change mode only)
Create a new Order.
NOTE: This button appears only when no existing process order is currently displayed in the Work Area.
F5 or
Menu bar: Farm Process → Create
Next Process Step (Change mode only) Ctrl+F1
Process Cycle Shift+F9
The Work Area is organized into the following sections:
• Basic Data
• Header
• Items
Basic Data
The Basic Data area displays basic information about a Process Order.
All header fields will appear when you display each tab, unless you click on the Compress button.
The following fields are available with the standard Vistex implementation.
Basic Data displays the following fields:
Field Description
Order type Key to differentiate type of Order. Here its process order
Process Order Defines the process order number generated for a crop seasons
Process with Description Define the process step for which the process order has been
created
Target Quantity Area for which the Process order has been defined
Status Status of the process order
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
79
Header
Header shows the detailed information. The following tabs are available in the standard Vistex implementation.
• Details
• Confirmation
• Admin Data
NOTE: Functions accessed from the menu bar apply only to the Process Order Workbench displayed
in focus in the Work Area and do not apply to the data in the Search and Worklist.
IMPORTANT: Because Vistex software is extremely versatile, the user screen may be customized. As
a result, the screen may appear different from the standard screen described in this document.
Details
This Tab contains the Application Parameters. The Tab displays the following fields:
Header:
Field Description
Terrain Terrain is a geographical place. Represent the largest piece of
land where the plantation is taking place. A terrain can be divided
into several portions according to the agroindustry hierarchical
views. In ABS are used to represent the field structure.
Crop Crop Masters is a Produce type template with specific information
that allow define new cultural treatments for every specie that will
be planted in the field; each template should represent a crop
master which will be used in the subsequent elements of field
management.
Crop Process A Crop Process Represents a major agricultural process (Planting, Growing, Harvesting) as Agricultural Stage to be planned and scheduled during a period. A process corresponds to each one of the main elements of a crop cycle. Each process is created as a material and is associated to a Crop master to create a variant.
Each material should have a Bill of Material and a Routing, in order to schedule the agricultural activities to be performed on the fields.
Variant The variant allows to have different versions that contains the crop processes to performance for a determined crop.
Season Start Date The Season Start Date indicates the starting time to perform the Agricultural processes and tasks for a determined crop.
Season End Date The Season End Date indicates the finish time to perform the
Agricultural processes and tasks for a determined crop.
Delivered Qty Refers to the progress of the task
Consumed Qty Refers to consumed quantity of supplies in task orders.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
80
Basic Start date Start date of the process
Basic Finish date Finish date of the process
Planning Plant Logical plant of the land
Preceding order Prior order of the process
WBS element Unique key of a crop seasons
Confirmations Tab
Shows the below details of Tasks performed.
• Goods Receipt (Showing progress of tasks)
• Confirmation details of task orders
• Consumption details of task orders
Admin Data Tab
The Admin Data tab uses standard SAP functionality. The tab displays information regarding who
created and changed the information for this transaction and when the creation and most recent
changes occurred.
The Most Recent Notes section of the tab displays comments from the Notes tab.
The following fields appear in the Creation section of the tab:
Field Description
Created By User ID of the author of the original record.
Created on Date the record was created.
Time Time the document was created.
The following fields appear in the Most Recent Change section of the tab:
Field Description
Changed By User who last changed the document.
Changed on Date the document was changed.
Time of Change Time the document was changed.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
81
4.1.4 Procedure
➢ Displaying a process order
➢ Creating a process order
➢ Creating next process step
➢ Release to next process
➢ Technically complete process orders
➢ Revoke Technical Completion
➢ Schedule a planned task order
➢ Create a planned task order
➢ Create unplanned task order
➢ Confirm a task order
➢ Mass confirmation of task orders
➢ Technically complete task orders
➢ Revoke Technical completion of task orders
Displaying Crop Process Orders
1. Access transaction code /AGRI/FMFPM
2. In the Search and Worklist, perform a search or display your worklist. In the grid, select the
crop process order to be displayed.
3. Sort, filter, print, or export selected condition records, as needed.
Create Crop Process Orders
1. Access transaction code /AGRI/FMFPM
2. In the tool bar in Change mode press Create (F5) button to display the Create orders
window. Alternately, from the menu bar select Farm Process → Create
3. In the Create orders dialogue select the terrains for which an order will be created. Select the
Crop that determines the processes available. Input the valid on date to filter out unavailable
terrains and press Enter.
4. Select the variant from the dropdown menu. Select the Crop process from the drop down menu
5. Click on to display the terrains for which the orders will be created. Modify data if required
in the following fields: Bas. Start date, Target qty, Personnel number
6. Select a row item on the left and click . The system creates the order number and returns
to the Worklist Search screen.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
82
Create Next Process Steps
1. Access transaction code /AGRI/FMFPM
2. In the Search options select the required crop process order.
3. In the tool bar in Change mode, select the order line and press and click on Next Process
Step option. System validates if the order is released and user must then press to create
the next crop process order. If order is not release, please refer to the Release to Next Process
Steps procedure
Release to Next Process Step
1. Access transaction code /AGRI/FMFPM
2. In the Search options select the required crop process order.
3. In the tool bar in Change mode, select the order line and press and click on Release to
Next Process Step option. System validates if the order must be released. Press Yes. System
generates log with order number that was released.
TECO Process Order
1. Access transaction code /AGRI/FMFPM
2. In the Search options select the required crop process order.
3. In the tool bar in Change mode, select the order line and press and click on Technically
Complete option. System validates if the order must be technically complete. Press Yes.
System generates log with order number that was technically completed.
Revoke TECO Process Order
1. Access transaction code /AGRI/FMFPM
2. In the Search options select the required crop process order.
3. In the tool bar in Change mode, select the order line and press and click on Revoke
Technical Completion option. System validates if revoke technically complete is required. Press
Yes. System generates log with order number with technically revoked completion.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
83
Schedule Planned Task Orders
1. Access transaction code /AGRI/FMFPM
2. In the Search options select the required crop process order.
3. In the tool bar select Change mode
4. In the Work Area (Line Item details) select the line item with the required task to be scheduled.
Input version if required and available. Modify Task quantity and Action date based on
requirements
5. Select the order line and press and click on Schedule option. The system validates if
scheduling is required. Press Yes. System inputs the scheduled date and activates the
Scheduled flag.
Create Planned Task Orders
1. Access transaction code /AGRI/FMFPM
2. In the Search options select the required crop process order.
3. In the tool bar select Change mode
4. In the Work Area (Line Item details) select the line item with the required task to be created.
Input version if required and available. Modify Task quantity and Action date based on
requirements. Input equipment if required.
5. Select the order line and press and click on Create Task Order option. The system
validates if task order creation is required. Press Yes. System displays pop up window with the
task order number and the crop process number. It also input the task order number in the task
order field.
Create Unplanned Task Orders
1. Access transaction code /AGRI/FMFPM
2. In the Search options select the required crop process order.
3. In the tool bar select Change mode
4. In the Work Area (Line Item details) press to add an additional line item to the crop process
order
5. In operation short text input a description of the task that will be selected
6. In task select a task material that is not planned to take place
7. In ver. Field select a version if available and required
8. In the Task qty field input the required quantity and in unit input the unit of measure
9. In the action date input the date the order is required, and press enter. The system activates
the Unplanned flag.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
84
10. Select the newly added line item and press and click on Create Task Order option. The
system validates if task order creation is required. Press Yes. System displays pop up window
with the task order number and the crop process number. It also input the task order number
in the task order field.
Confirm Task Orders
1. Access transaction code /AGRI/FMFPM
2. In the Search options select the required crop process order.
3. In the tool bar select Change mode
4. In the Work Area (Line Item details) select the line item that has a task order number in the task
order field press and click on Order confirmations option. The system displays a window
with three sections: Operations, Materials and work centers
5. In the Operations section the user inputs Conf. Qty, posting date, Personnel number if required,
Unl. point if required, number of employees that did that task, Execution start date and time,
Finish date and time
6. In the materials section the user clicks on to add materials that might have been
consumed during the execution of that task. The user must input the material code, the
confirmed quantity and unit of measure, plant code, storage location, movement type (261 when
consuming supplies) and batch number if required.
7. In the work center section, the user must input quantity of time it used a resource for that task.
8. Select the line items to be confirmed in each section.
9. In the tool bar section press
10. System displays log stating how many operations were successfully confirmed.
Mass Confirmation of Task Orders
1. Access transaction code /AGRI/FMFPM
2. In the Search options select the required crop process order.
3. In the tool bar select Change mode
4. In the Work Area (Line Item details) select the line items that have task order numbers in the
task order field press and click on Mass Confirmations option. The system validates if
standard values will be confirmed. Press yes. The system generates log with the confirmations
done for all the operations in each of the selected task orders. If No is pressed nothing happens.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
85
TECO (Technical Complete) Task Orders
1. Access transaction code /AGRI/FMFPM
2. In the Search options select the required crop process order.
3. In the tool bar select Change mode
4. In the Work Area (Line Item details) select the line items that have task order numbers in the
task order field press and click on Technically Complete option. The system validates
if the order must be technically complete. Press yes. The system generates log stating that the
order is saved with the new status.
Revoke TECO (Technical Complete) Task Orders
1. Access transaction code /AGRI/FMFPM
2. In the Search options select the required crop process order.
3. In the tool bar select Change mode
4. In the Work Area (Line Item details) select the line items that have task order numbers in the
task order field press and click on Revoke Technical Completion option. The system
validates if the technical complete must be revoked. Press yes. The system generates log stating
that the order is saved with the new status.
4.2 Schedule Task Orders
4.2.1 Definition
The Schedule Task Orders transaction allows the user to determine when the task orders proposed by
a Crop Process Order should be executed.
This transaction requires that a process order is created for a terrain.
4.2.2 Access
Transaction code: /AGRI/FMST23
4.2.3 Structure
The Schedule Task Orders screen is organized into the following areas:
• Selection Use this screen to input information to schedule tasks proposed by the crop process orders previously created.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
86
As needed, use the following buttons (located above the Selection Area) to execute the transaction or
have effects on in the input information in the Selection Area:
Button Action Alternate Access
Schedules selected tasks and activates a flag in the
scheduled field
Shift+F2
Un-schedules selected tasks and deactivates the flag
in the scheduled field
Shift+F5
Displays selected line item information in pop-up
window
Sorts selected column in ascending order
Sorts selected column in descending order
Find a term within the displayed table
Find next term within the displayed table
Set filter
Totals a selected column which has numeric
characters
Subtotals a totaled column by selecting a different
column
Export displayed information
Change layout
Mass selection of tasks to be scheduled
Single selection of a task to be scheduled
All Selection Area fields will appear when transaction is executed from the main menu.
Field Description
Terrain Displays the terrain in which the task is available for scheduling
Crop Displays the crop assigned to the terrain
Order Displays the process order number available for that terrain under
which task will be scheduled
Item No. Displays the item number within the process order
OpAc Displays the Operation / Activity within the process order
Operation short text Displays a description of the operation
Task Displays the task available for scheduling
Material Description Displays description of the task
Target order quantity Displays quantity
Task qty. Displays quantity of the task that will be scheduled
UoM Displays Unit of measure
Schedule Date Displays date in which the task is scheduled in the system
Scheduled Displays flag when the task is scheduled
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
87
The user must click either or to select the tasks to be scheduled.
NOTE: Functions accessed from the menu bar apply only to the process order displayed in focus in the
Selection Area.
IMPORTANT: Because Vistex software is extremely versatile, the user screen may be customized. As
a result, the screen may appear different from the standard screen described in this document.
4.2.4 Procedure
➢ Schedule selected tasks
Schedule selected tasks
1. Access transaction code /AGRI/FMST23
2. In the Selection Area input any of the following fields as search criteria:
2.1. Order type (For example: Planting ZP00 / Growing ZG00)
2.2. Process order number
2.3. Terrains (individual, range of terrain or a selection of terrains by clicking on
2.4. Select Crop
2.5. Enter a variant
2.6. Crop process
2.7. Process
2.8. Task
2.9. Planning plant
2.10. Basic start date
2.11. Basic finish date
3. Press Execute
4. Select the tasks to be scheduled within the process for each terrain that is required by clicking on
5. Press Shift+F2
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
88
6. Confirm action? Yes
7. System confirms task is scheduled
8. Flag is activated for the selected tasks
4.3 Schedule and Task Orders
4.3.1 Definition
The Schedule and create Task Orders transaction allows the user to determine when the task orders
proposed by a Crop Process Order should be executed and option to create the task orders
This transaction requires that a process order is created for a terrain.
4.3.2 Access
Transaction code: /AGRI/FMSC23
4.3.3 Structure
The Schedule and Create Task Orders screen is organized into the following areas:
• Selection Use this screen to input information to schedule tasks proposed by the crop process orders previously created.
As needed, use the following buttons (located above the Selection Area) to execute the
transaction or have effects on in the input information in the Selection Area:
Button Action Alternate Access
Schedules selected tasks and activates a flag in the
scheduled field
Shift+F2
Un-schedules selected tasks and deactivates the flag
in the scheduled field
Shift+F5
Enables to create task orders for the selection F5
Displays selected line item information in pop-up
window
Sorts selected column in ascending order
Sorts selected column in descending order
Find a term within the displayed table
Find next term within the displayed table
Set filter
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
89
Totals a selected column which has numeric
characters
Subtotals a totaled column by selecting a different
column
Export displayed information
Change layout
Mass selection of tasks to be scheduled
Single selection of a task to be scheduled
All Selection Area fields will appear when transaction is executed from the main menu.
Field Description
Terrain Displays the terrain in which the task is available for scheduling
Crop Displays the crop assigned to the terrain
Order Displays the process order number available for that terrain under
which task will be scheduled
Item No. Displays the item number within the process order
OpAc Displays the Operation / Activity within the process order
Operation short text Displays a description of the operation
Task Displays the task available for scheduling
Material Description Displays description of the task
Target order quantity Displays quantity
Task qty. Displays quantity of the task that will be scheduled
UoM Displays Unit of measure
Schedule Date Displays date in which the task is scheduled in the system
Scheduled Displays flag when the task is scheduled
• The user must click either or to select the tasks to be scheduled.
NOTE: Functions accessed from the menu bar apply only to the process order displayed in focus in the
Selection Area.
IMPORTANT: Because Vistex software is extremely versatile, the user screen may be customized. As
a result, the screen may appear different from the standard screen described in this document.
4.3.4 Procedure
➢ Schedule and Create selected tasks
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
90
Schedule and Create selected tasks
1. Access transaction code /AGRI/FMSC23
2. In the Selection Area input any of the following fields as search criteria: 1. Order type (For example: Planting ZP00 / Growing ZG00) 2. Process order number
3. Terrains (individual, range of terrain or a selection of terrains by clicking on 4. Select Crop 5. Enter a variant 6. Crop process 7. Process 8. Task 9. Planning plant 10. Basic start date 11. Basic finish date
3. Press Execute
4. Select the tasks to be scheduled within the process for each terrain that is required by clicking on
5. Press Shift+F2
6. Confirm action? Yes
7. System confirms task is scheduled
8. Flag is activated for the selected tasks
9. Once its scheduled, select the line items scheduled and click on at the top
10. Task orders will be created
4.4 Create Mass Unplanned Task Orders
4.4.1 Definition
Mass Unplanned Task Orders transaction allows the user to create the unplanned task orders for
multiple terrains.
This transaction requires that a process order is created for a terrain.
4.4.2 Access
Transaction code: /AGRI/FMUT23
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
91
4.4.3 Structure
The Unplanned Task Orders screen is organized into the following areas:
• Selection Use this screen to input information to get the create screen for task orders
Field Description
Plant Logical plant to which the crop seasons belongs to
Crop Displays the crop assigned to the terrain
Task Displays the task for the Unplanned order to be created
Basis of Order Quantity Qty for Task order creation: Absolute Area or Estimated Yield
Terrain Terrain for which the unplanned task order to be created
Variant Process variant from Crop seasons
Crop Process Process for which the task has to eb created
Valid On Date at which the crop seasons is valid to. Default: System date
Production Version Operations and BOM are combined to form a production version.
Defines which production version to be considered for the task
order creation
IMPORTANT: Because Vistex software is extremely versatile, the user screen may be customized. As
a result, the screen may appear different from the standard screen described in this document.
4.4.4 Procedure
➢ Create Unplanned Task Orders
Create Unplanned Task Orders
1. Access transaction code /AGRI/FMUT23
2. In the Selection Area input all the below fields:
3. Plant
4. Crop
5. Task
6. Basis of Order Qty
7. Terrains (individual, range of terrain or a selection of terrains by clicking on
8. Variant
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
92
9. Crop Process
10. Valid On
11. Production Version
12. Press Execute
13. Select the line items and click on to create the unplanned task orders
4.5 Mass Farming Process Order Creation
4.5.1 Definition
Mass Unplanned Task Orders transaction allows the user to create the unplanned task orders for
multiple terrains.
4.5.2 Access
Transaction code: /AGRI/FMFP23
4.5.3 Structure
When you enter the transaction, the Selection Area appears with fields that require information to be
input. This is the information the system will process to generate the orders.
As needed, use the following buttons (located above the Selection Area) to execute the transaction or
have effects on in the input information in the Selection Area:
Button Action Alternate Access
Execute
Creates process orders based on the
selection criteria
F8
Get variant
Fill selection criteria previously saved
into the system
Shift+F5
Other selection
Clear Selection Area input fields (Variant
and Crop process)
Ctrl+F1
All Selection Area fields will appear when transaction is executed from the main menu.
Field Description
Planning Plant Identifies the maintenance planning plant to which terrains are
associated
Terrain Input the terrains for which process orders will be created. It
can be individual, range or a list of terrains
Crop Crop assigned to the selected terrains. It determines the
available variants and crop processes
Variant Is the available crop processes
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
93
Crop Process Dropdown menu that allows the selection of the process for
which an order is to be generated
Release Prior Process Order
(flag)
When this indicator is active it releases the previous process
for the system to generate the next process order for the
selected terrains
Basic Start date Input date for which the process order is expected to start
Personnel number Option to input who is responsible for those orders
4.5.4 Procedure
➢ Create Mass Farming Process Orders
Create Mass Farming Process Orders
1. Access transaction code /AGRI/FMFP23
2. In the Selection Area input the following fields:
2.1.1. Planning plant
2.2. Terrains (individual, range of terrain or a selection of terrains by clicking on
2.3. Select Crop. NOTE: The crop must be assigned previously to the terrain for this process to
work
2.4. Press Enter
2.5. Select available Variant
2.6. Select available Crop Process NOTE: system validates if there is a previous process to generate or not a new process order
2.7. Determine if a previous process order must be released by activating the flag
2.8. Input Basic start date
2.9. Input personnel number
2.10. Select to create the process orders associated to the selected terrains
4.6 Mass Order Confirmation
4.6.1 Definition
Mass Order Confirmation transaction allows the user to confirm multiple task orders.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
94
4.6.2 Access
Transaction code: /AGRI/FMFP25
4.6.3 Structure
Mass Order Confirmation screen is organized into the following areas:
• Selection
When we enter the transaction, the Selection Area appears with fields that require information to be
input. This is the information the system will process to get the task orders to be confirmed
As needed, use the following buttons (located above the Selection Area) to execute the transaction or
have effects on in the input information in the Selection Area:
Button Action
Execute
Creates process orders based on the selection criteria
Get variant
Fill selection criteria previously saved into the system
Dynamic selection (allows further selection)
All Selection Area fields will appear when transaction is executed from the main menu.
Field Description
Terrain Terrain for which the task orders are created
Crop Crop for which the task orders are created
Process Relevant process material
Process Material Description Relevant process material description
Process Order Process Order number
Process Order Type Process Order type
Task Order Task Order to be confirmed
Planning Plant Plant
Target Qty Target quantity of Confirmation
Delivered Qty Confirmed qty
Confirmation Qty To be confirmed qty
Unit Area unit/task order unit
Posting Date Date of Posting for the task order confirmation
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
95
Consume Check box if Consumables are required to be consumed or not
4.6.4 Procedure
➢ Mass Order Confirmation
Mass Order Confirmation
1. Access transaction code /AGRI/FMFP25 2. In the Selection Area input the required fields to get the task orders to be confirmed.
3. Select the required line items
4. Change the confirmation qty if partial confirmation has to be done
5. Change the posting date of required
6. Select the consume checkbox if consumables are required
7. Click on Confirm button to confirm the selected task orders
4.7 Mass Technically Complete/Revoke Task Orders
4.7.1 Definition
This transaction allows the user to technically complete multiple task orders and revoke task orders.
4.7.2 Access
Transaction code: /AGRI/FMFP27
4.7.3 Structure
Mass Order Confirmation screen is organized into the following areas:
• Selection
When we enter the transaction, the Selection Area appears with fields that require information to be
input. This is the information the system will process to get the task orders to be Technically completed
or revoked
As needed, use the following buttons (located above the Selection Area) to execute the transaction or
have effects on in the input information in the Selection Area:
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
96
Button Action
Execute
Creates process orders based on the selection criteria
Get variant
Fill selection criteria previously saved into the system
Dynamic selection (allows further selection)
Radio Button to select the function. Technically complete/Revoke
4.7.4 Procedure
➢ Mass Technical Completion of Task Orders
➢ Mass Revoke of Task Orders
Mass Technical completion of Task Orders
1. Access transaction code /AGRI/FMFP27
2. Select the function
3. In the Selection Area input the required fields to get the task orders to be technically completed
4. Select the required line items and click on at the top
5. Click yes to proceed further
6. Orders will be technically completed
Mass Revoke of technically completed Task Orders
1. Access transaction code /AGRI/FMFP27
2. Select the function 3. In the Selection Area input the required fields to get the task orders to be revoked
4. Select the required line items and click on at the top 5. Click yes to proceed further 6. Orders will be revoked
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
97
4.8 Nursery Process
4.8.1 Definition
The Farming Process Work Bench is used to create and release agricultural process orders at terrain
level by crop and variant. This setup gives the user a full view of all the planned tasks required to
complete an agricultural process for each of the terrains. Simultaneously task orders can be created,
confirmed and technically complete. Additional to this flexibility the user may create unplanned orders
within the process when required due to unexpected events might take place in a normal agricultural
production process.
Master data that allows the processes to take place are materials, terrains, crop master, crop cycle,
crop season and variants.
4.8.2 Access
FARMING PROCESS Transaction code: /AGRI/FMNSM
4.8.3 Structure
The Nursery Workbench screen is organized into the following areas:
• Search and Worklist Use the Search and Worklist to view selected process order in a grid format. From the grid,
click on farming process order to display that process order in focus in the Work Area.
• Work Area
Use the Work Area to maintain Nursery process order. In the standard Vistex
Implementation, the Work Area contains the following tabs:
4.8.3.1 Search and Worklist
When you enter the transaction, the Search and Worklist appears in the left side of the screen, with the Search tab active.
The Search and Worklist initially appears collapsed but can be resized horizontally. As needed, use the following buttons (located above the Search and Worklist) to adjust the Search and Worklist:
Button Action Alternate Access
Display ↔ Hide Worklist
Toggle between displaying and hiding the Search and Worklist.
F7 or
Menu bar: Environment → Display ↔Hide Worklist
Minimize Worklist
Partial screen view of Search and Worklist.
F8 or
Menu bar: Environment → Minimize Worklist
Maximize Worklist
Full screen view of Search and Worklist.
F9 or
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
98
Menu bar: Environment → Maximize Worklist
Worklist ↔ Calendar
Toggle between displaying the Search and Worklist and the Calendar view.
Shift+F9
The Search and Worklist contains the following tabs:
• Search
• Worklist
Click on a tab to activate it (the active tab name will be shown as white text in a dark background). In the tab name, the number in parentheses indicates the number of displayed lines.
Search Tab
Use the Search tab to locate and list of nursery orders. Search results appear in a grid that can be sorted and searched.
The following buttons appear in the Search tab:
Button Action
Search
View the search criteria screen. Enter the search criteria, and then click on
the Execute button to perform the search.
NOTE: Search results are not retained when you leave the transaction.
Search More
After you perform a search, use Search More to retain the results from the previous search, perform a new search, and append the new results to the list already displayed.
Technically complete (Change mode only; post search)
Select the process order to change, then click on the button to display a selection menu. Options:
• Next Process Steps
• Release to next process
• Technically complete
• Revoke Technical completion
Add to Favorites
Copy selected records from the search results to your Favorites group (on the Worklist tab) to access those records each time you enter the transaction, without performing a search.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
99
From the search results, select one or more lines, and then click on the Add to Favorites button to copy the lines to the Favorites group on the Worklist tab.
Add to Worklist
Copy selected records from the search results to the Worklist tab to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Worklist button. Select an existing group from the Move to Group dropdown list or create a new group to which the items will be copied.
Details
View selected records in a vertical column format in a separate window.
Sort in Ascending Order
Sort the data in a selected column in ascending alphanumeric sequence.
Sort in Descending Order
Sort the data in a selected column in descending alphanumeric sequence.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window. In that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
Worklist Tab
Use the Worklist tab to list the agreements currently assigned to your worklist. Worklist entries appear in a grid format that can be sorted and searched.
The following buttons appear in the Worklist tab:
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
100
Button Action
Add to Favorites
Copy selected records from the search results to your Favorites group (on the Worklist tab) to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Favorites button to copy the lines to the Favorites group on the Worklist tab.
Move to Group
Create a group for selected, move selected to an existing group or Favorites, or rename groups.
Delete
Delete selected process order from Favorites or other Worklist group.
Details
View selected records in a vertical column format in a separate window.
Sort in Ascending Order
Sort the data in a selected column in ascending alphanumeric sequence.
Sort in Descending Order
Sort the data in a selected column in descending alphanumeric sequence.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window. In that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
101
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
4.8.3.2 Work Area
The following buttons above the Work Area apply to the Process Order displayed in focus:
Button Action Alternate Access
Display ↔ Change
Toggle between Display mode and Change mode.
F6 or
Menu bar: Nursery Process → Display ↔Change
Create (Change mode only)
Create a new Order.
NOTE: This button appears only when no existing process order is currently displayed in the Work Area.
F5 or
Menu bar: Nursery Process → Create
Next Process Step (Change mode only) Ctrl+F1
Process Cycle Shift+F9
The Work Area is organized into the following sections:
• Basic Data
• Header
• Items
Basic Data
The Basic Data area displays basic information about Nursery Process Order.
All header fields will appear when you display each tab, unless you click on the Compress button.
The following fields are available with the standard Vistex implementation.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
102
Basic Data displays the following fields:
Field Description
Order type Key to differentiate type of Order. Here its process order
Process Order Defines the process order number generated for a crop seasons
Process with Description Define the process step for which the process order has been
created
Target Quantity Area for which the Process order has been defined
Status Status of the process order
Header
Header shows the detailed information. The following tabs are available in the standard Vistex implementation.
• Details
• Confirmation
• Admin Data
NOTE: Functions accessed from the menu bar apply only to the Process Order Workbench
displayed in focus in the Work Area and do not apply to the data in the Search and Worklist.
IMPORTANT: Because Vistex software is extremely versatile, the user screen may be customized.
As a result, the screen may appear different from the standard screen described in this document.
Details
This Tab contains the Application Parameters. The Tab displays the following fields:
Header:
Field Description
Terrain Terrain is a geographical place. Represent the largest piece of
land where the plantation is taking place. A terrain can be divided
into several portions according to the agroindustry hierarchical
views. In ABS are used to represent the field structure.
Crop Crop Masters is a Produce type template with specific information
that allow define new cultural treatments for every specie that will
be planted in the field; each template should represent a crop
master which will be used in the subsequent elements of field
management.
Crop Process A Crop Process Represents a major agricultural process
(Planting, Growing, Harvesting) as Agricultural Stage to be
planned and scheduled during a period. A process corresponds
to each one of the main elements of a crop cycle. Each process
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
103
is created as a material and is associated to a Crop master to
create a variant.
Each material should have a Bill of Material and a Routing, in
order to schedule the agricultural activities to be performed on the
fields.
Variant The variant allows to have different versions that contains the crop
processes to performance for a determined crop.
Season Start Date The Season Start Date indicates the starting time to perform the
Agricultural processes and tasks for a determined crop.
Season End Date The Season End Date indicates the finish time to perform the
Agricultural processes and tasks for a determined crop.
Delivered Qty Refers to the progress of the task
Consumed Qty Refers to consumed quantity of supplies in task orders.
Basic Start date Start date of the process
Basic Finish date Finish date of the process
Planning Plant Logical plant of the land
Preceding order Prior order of the process
WBS element Unique key of a crop seasons
Confirmations Tab
Shows the below details of Tasks performed.
• Goods Receipt (Showing progress of tasks)
• Confirmation details of task orders
• Consumption details of task orders
Admin Data Tab
The Admin Data tab uses standard SAP functionality. The tab displays information regarding who
created and changed the information for this transaction and when the creation and most recent
changes occurred.
The Most Recent Notes section of the tab displays comments from the Notes tab. The following fields appear in the Creation section of the tab:
Field Description
Created By User ID of the author of the original record.
Created on Date the record was created.
Time Time the document was created.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
104
The following fields appear in the Most Recent Change section of the tab:
Field Description
Changed By User who last changed the document.
Changed on Date the document was changed.
Time of Change Time the document was changed.
4.8.4 Procedure
➢ Create Nursery Orders, Batch Creation and Confirmation
➢ Create Task Orders and Confirmation
Create Nursery Orders, Batch creation and Confrimation
1. Access transaction code /AGRI/FMNSM
2. Click on the change button and Click on the create button
3. Enter the below details
4. Enter Terrain
5. Enter Crop and click on enter
6. Select the variant
7. Select the Crop process
8. Click on “Execute” button
9. Select line items or click on “Select All” to select all the line items and click on button
10. Click on create batch at the header and enter the Batch to be created in the pop up
11. Select the Batch created in the Batch tab and click on batch confirmation
12. Select the required operations and click on confirm
13. Batch confirmation done
Create Task orders and Confirmation
1. Access transaction code /AGRI/FMNSM
2. Click on Task Orders tab
3. In the Work Area (Line Item details) select the line item with the required task to be created.
Input version if required and available. Modify Task quantity and Action date based on
requirements. Input equipment if required.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
105
4. Select the order line and press and click on Create Task Order option. The system
validates if task order creation is required. Press Yes. System displays pop up window with the
task order number and the crop process number. It also input the task order number in the task
order field.
5. In the Work Area (Line Item details) select the line item that has a task order number in the task
order field press and click on Order confirmations option. The system displays a window
with three sections: Operations, Materials and work centers
6. In the Operations section the user inputs Conf. Qty, posting date, Personnel number if required,
Unl. point if required, number of employees that did that task, Execution start date and time,
Finish date and time
7. In the materials section the user clicks on to add materials that might have been
consumed during the execution of that task. The user must input the material code, the
confirmed quantity and unit of measure, plant code, storage location, movement type (261 when
consuming supplies) and batch number if required.
8. In the work center section, the user must input quantity of time it used a resource for that task.
9. Select the line items to be confirmed in each section.
10. In the tool bar section press
11. System displays log stating how many operations were successfully confirmed
4.9 Produce Receipt
4.9.1 Definition
The Produce Receipt Workbench is the fruit reception procedure on weighbridge at production plant.
This functionality covers two main scenarios for the received fruit, such as, when the fruit belongs to
third party grower or whether the company is its owner. There are multiple functionalities, such as, to
create, to change and display the save information during the fruit reception.
4.9.2 Access
Transaction code: /AGRI/FMPRM
4.9.3 Structure
The Produce Receipt Workbench screen is organized into the following areas:
• Search and Worklist
Use the Search and Worklist to view selected Produce Receipt in a grid format. From the grid,
click on farming process order to display that process order in focus in the Work Area.
• Work Area
Use the Work Area to maintain Produce Receipt. In the standard Vistex
Implementation, the Work Area contains the following tabs:
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
106
4.9.3.1 Search and Worklist
When you enter the transaction, the Search and Worklist appears in the left side of the screen, with the
Search tab active.
The Search and Worklist initially appears collapsed but can be resized horizontally. As needed, use the
following buttons (located above the Search and Worklist) to adjust the Search and Worklist:
Button Action Alternate Access
Display ↔ Hide Worklist
Toggle between displaying and hiding the Search and Worklist.
F7 or
Menu bar: Environment → Display ↔Hide Worklist
Minimize Worklist
Partial screen view of Search and Worklist.
F8 or
Menu bar: Environment → Minimize Worklist
Maximize Worklist
Full screen view of Search and Worklist.
F9 or
Menu bar: Environment → Maximize Worklist
Worklist ↔ Calendar
Toggle between displaying the Search and Worklist and the Calendar view.
Shift+F9
The Search and Worklist contains the following tabs:
• Search
• Worklist
Click on a tab to activate it (the active tab name will be shown as white text in a dark background). In the tab name, the number in parentheses indicates the number of displayed lines.
Search Tab
Use the Search tab to locate and list of process orders. Search results appear in a grid that can be sorted and searched.
The following buttons appear in the Search tab:
Button Action
Search
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
107
Click to view the search criteria screen. Enter the search criteria, and then click on
the Execute button to perform the search.
NOTE: Search results are not retained when you leave the transaction.
Search More
After you perform a search, use Search More to retain the results from the previous
search, perform a new search, and append the new results to the list already
displayed.
Entry
In Change mode, used to either create a list or to make header and detail changes
to more than one guide number at a time. When in Change mode, highlight the
guide to be maintained in the Search tab. Click on the button and select the Mass
Changes option. Select the data to be changed, by tab.
Add to Favorites
Copy selected records from the search results to your Favorites group (on the
Worklist tab) to access those records each time you enter the transaction, without
performing a search.
From the search results, select one or more lines, and then click on the Add to
Favorites button to copy the lines to the Favorites group on the Worklist tab.
Add to Worklist
Copy selected records from the search results to the Worklist tab to access those
records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to
Worklist button. Select an existing group from the Move to Group dropdown list
or create a new group to which the items will be copied.
Details
View selected records in a vertical column format in a separate window.
Sort in Ascending Order
Sort the data in a selected column in ascending alphanumeric sequence.
Sort in Descending Order
Sort the data in a selected column in descending alphanumeric sequence.
Find
Find a term within the grid values. The system highlights any cell that contains
the term.
Find Next
Find the next instance of a term searched for previously.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
108
Set Filter
Select a column, and then click the Set Filter button to set and delete column
filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation
(Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you
also may have the system calculate subtotals. Click to view a dialog window. In
that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file
type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the
Search and Worklist.
Worklist Tab
Use the Worklist tab to list the agreements currently assigned to your worklist. Worklist entries appear
in a grid format that can be sorted and searched.
The following buttons appear in the Worklist tab:
Button Action
Add to Favorites
Copy selected records from the search results to your Favorites group (on the Worklist tab) to access those records each time you enter the transaction, without performing a search.
From the search results, select one or more lines, and then click on the Add to Favorites button to copy the lines to the Favorites group on the Worklist tab.
Move to Group
Create a group for selected, move selected to an existing group or Favorites, or rename groups.
Delete
Delete selected Produce Receipt number from Favorites or other Worklist group.
Details
View selected records in a vertical column format in a separate window.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
109
Sort in Ascending Order
Sort the data in a selected column in ascending alphanumeric sequence.
Sort in Descending Order
Sort the data in a selected column in descending alphanumeric sequence.
Find
Find a term within the grid values. The system highlights any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Set Filter
Select a column, and then click the Set Filter button to set and delete column filters.
Total (restricted to relevant numeric columns)
Highlight at least one numeric column, and then select a type of calculation (Total, Mean Value, Minimum, or Maximum) from the dropdown list.
Subtotals (active only when the Total button is used)
If you used the Total button to calculate the total for a selected column, you also may have the system calculate subtotals. Click to view a dialog window. In that window, check the checkbox of the column used to calculate subtotals.
Export
Export the entire contents of the grid area to the selected document type/file type.
Choose Layout
Choose, change, save, and manage column layouts within the ALV grid in the Search and Worklist.
4.9.3.2 Work Area
The following buttons above the Work Area apply to the Process Order displayed in focus:
Button Action Alternate Access
Display ↔ Change
Toggle between Display mode and Change mode.
F6 or
Menu bar: Farm Process → Display ↔Change
Create (Change mode only)
Create a new Order.
NOTE: This button appears only when no existing process order is currently displayed in the Work Area.
F5 or
Menu bar: Farm Process → Create
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
110
Next Process Step (Change mode only) Ctrl+F1
Process Cycle Shift+F9
The Work Area is organized into the following sections:
• Header screen
• Screen Tabs
✓ Header
✓ Quality
✓ Batch Management
o Additional Data
o Admin Data
o Items
Header Screen:
This screen is used to select the scenario in process, such as, whether the fruit comes from a third party
or the own fields. This selection including the plant defines the logistic process to perform into the SAP
system. The screen displays the following fields:
Field Description
Produce Receipt Internal Guide number for the document class. It is proposed
automatically and displayed during the saving.
Produce Type Produce Type represents the crop specie.
Document Class Predefined Document with some configurations methods and sub-
routines validations, which will be used during the fruit reception
procedure.
Status The Status indicates if the defined logistic process were performed
successfully or not. The main status are Saved, Closed, Error and
Processing.
Plant Plant code where is going to be received the fruit.
Fiscal Year Period, 12 months as a rule, for which the company is to create its
inventory and balance sheet. The fiscal year can be the same as
the calendar year but does not have to be.
Weight Scale ID Represents the code identify in the system the physical weight
scale.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
111
Screen tabs:
Header
This tab enables to select relevant information for the postings. The screen displays the following fields:
Field Description
Company Code The company code is an organizational unit within financial
accounting.
Document Date Date on which the fruit reception guide was created.
Time Date Time on which the fruit reception guide was created.
Posting Date Date on which the fruit received quantity was posted within the
inventory in the system.
Equipment N° Transport number for the freight.
License N° License number belonging to the transport number.
Equipment Type Identify in the system the transport type.
Gross Weight Gross weight value of fruit taken from the weighbridge scale. The
weight includes the transport equipment and the fruit.
Tare Weight Tare weight value taken from the weighbridge scale. The weight
includes only the transport equipment.
Net Weight Net weight value taken from the weighbridge scale.
Net Weight = Gross Weight – Tare Weight
Calculated Net Weight Calculated Net weight according with the total weights from the
items table.
Deviation Deviation in percentage. It is calculated based on the Net weight
and the Calculated Net Weight
Quality Tab
The quality tab allows to add the inspection characteristic which will be inspected during the fruit reception. This tab has a table with the next columns:
Field Description
Master Characteristics Inspection characteristic code. The data source to list comes from
the inspection plan for the material, the crop master and
agreements.
Short Text Description for the Master Characteristic
Characteristics Type The characteristic to be treated can be quantitative or qualitative.
Version Version number of the Master Characteristic.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
112
Result In this field you can confirm the result for inspection result. There
can be selected the values from a define catalog or adding any
value into the field.
Description The value description is taken from the associated catalog to the
column.
Internal Measure Unit Internal, language-independent, measurement unit format.
Batch Management Tab
This tab is used to add the batch number in cases when the fruit needs traceability for the further process. The screen displays the following field:
Field Description
Batch Assigns the batch number to create in order to have the traceability.
Additional Data Tab
Configured fields will appear here
Admin Data Tab
The Admin Data tab uses standard SAP functionality. The tab displays information regarding who
created and changed the information for this transaction and when the creation and most recent
changes occurred.
The Most Recent Notes section of the tab displays comments from the Notes tab.
The following fields appear in the Creation section of the tab:
Field Description
Created By User ID of the author of the original record.
Created on Date the record was created.
Time Time the document was created.
The following fields appear in the Most Recent Change section of the tab:
Field Description
Changed By User who last changed the document.
Changed on Date the document was changed.
Time of Change Time the document was changed.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
113
Items Tab
There, can be associated the main information about fruit source and some details. The screen displays the following fields:
Field Description
Item Sequence numbers.
Terrain Terrain is a geographical place that represents the largest
piece of land where the plantation is taking place. A terrain can
be divided into several portions according to the agroindustry
hierarchical views. In ABS are used to represent the field
structure.
Crop Code for the crop
Material Is the received fruit at plant which is identified into the system
as the receiver material to consumed during the packing.
Vendor Specifies an alphanumeric key that uniquely identifies the
grower in the SAP system.
Agreement Agreement number. This compiles all the grower information
including the farm/production zone/field/block, loans, advances,
among others.
Direct Weight The weight can be specified per position. It is used to handle
the weight distribution whether the guide has several terrains
as fruit sources.
Unit of measure Unit of measure for the direct weight. Usually is used the KG
unit.
Number of units Quantity to receive per position. This field is used when the
direct weight is un-known.
Receiving Unit Type Received unit type the unit for the column “Number of units”.
This is used whether is going to be received the fruit using
different units, such as, BOXES.
Calculated Weight Conversion of the number of units in KG units.
Distribution % Percentage of weight for the total terrains into the items table.
Weigh bridge weight Calculated Net weight based on the distribution percentage.
Batch Assigns the batch number to create in order to have the
traceability.
Ticket number Internal Guide number for the document class. It is proposed
automatically and displayed during the saving.
The following buttons are enables to use within the Work Area:
Button Action Alternate Access
Compress
Compress or extend the desired screen area.
Select
Select all records from the items tab.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
114
Delete
Delete the selected row from the items table.
Sort in Ascending Order
Sort the data in a selected column in ascending
alphanumeric sequence.
Sort in Descending Order
Sort the data in a selected column in descending
alphanumeric sequence.
Find
Find a term within the items table. The system highlights
any cell that contains the term.
Find Next
Find the next instance of a term searched for previously.
Total
Summarize the values for the selected column. This
option is enabling only for valuated columns.
Subtotals
There is possible to create subtotals in one or more
columns in the list that are not value columns. The
prerequisite is to have stablished a total value for a least
one column.
Export
Export the entire contents of the items table to the
selected document type/file type.
4.9.4 Procedure
➢ Creating a New Produce Receipt
➢ Maintaining the Produce Receipt
➢ Displaying the Produce Receipt
➢ Reverse the Produce Receipt
➢ Delete the Produce Receipt
Creating a New Produce Receipt
1. Access transaction code /AGRI/FMPRM.
2. Click on the button Display <--> Change, to enable the modification.
3. Click on the button Create, to activate the creation mode.
4. Click on the Produce type field to list the options.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
115
5. Select the Produce type.
6. Click on the Plant field to activate it.
7. Click on the button or press F4 on the keyboard to open a new window with the data element list.
8. Select the plant number from the list, where is going to be receptioned the fruit.
9. Click on the Document class field to list the options.
10. Select the Document class from the list.
11. Click on the Fiscal year field to activate it.
12. Fill in with the calendar year.
13. Click on the Weight Scale ID field to list the options.
14. Select the Weight Scale ID from the list.
15. Click on the header tab
16. Click on the Document date / time field to activate it.
17. Click on the button or press F4 on the keyboard to open a new window with the calendar.
18. Select the date from the calendar.
19. Click on the Posting date field to activate it.
20. Click on the button or press F4 on the keyboard to open a new window with the calendar.
21. Select the date from the calendar.
22. Click on the Equipment N° field to activate it.
23. Click on the button or press F4 on the keyboard to open a new window with the equipment list.
24. Select the equipment from the list.
25. Click on the button to save the guide number.
26. Click on the button to close the pop up confirmation message.
27. Click on the Gross Weight field to activate it.
28. Fill in with the Gross Weight value.
29. Click on the button to save the guide number.
30. Click on the button to close the pop up confirmation message.
31. Click on the Tare Weight field to activate it.
32. Fill in with the Tare Weight value.
33. Click on the button to save the guide number.
34. Click on the button to close the pop up confirmation message.
35. Click on the Items tab
36. Click on the Terrain field to activate it.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
116
37. Click on the button or press F4 on the keyboard to open a new window with the terrain list.
38. Select the terrain from the list.
39. Click on the Crop field to activate it.
40. Click on the button or press F4 on the keyboard to open a new window with the crop list.
41. Select the crop from the list.
42. Click on the Direct Weight field to activate it.
43. Fill in with the Weighted value.
44. Click on the N° of units field to activate it.
45. Fill in with the number of units.
46. Click on the Receiving unit type field to activate it.
47. Select the receiving unit from the list.
48. Click on the Quality tab
49. Click on the Result field per listed characteristic to activate it.
50. Click on the button or press F4 on the keyboard to open a new window with the catalog data.
51. Click on the Batch Management tab
52. Click on the Batch field to activate it.
53. Fill in with the Batch number for the traceability. By default, the system proposes the same guide number.
54. Click on the button to save the guide number.
55. Click on the button to close the pop up confirmation message.
56. Click on the button, from the main menu.
57. Click on the button from the drop down list.
Maintaining the Produce Receipt
1. Access transaction code /AGRI/FMPRM.
2. Click on the button Display <--> Change, to enable the modification.
3. Click on the button Search, to open the searching options screen.
4. Click on selected fields to activate ones, in order to make the searching.
5. Click on the button or press F4 on the keyboard to open a new window with the data element list.
6. Fill in with desired values.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
117
7. Click on the button to execute the searching.
8. Click on the Ticket N° value from the search tab to display the guide information is the Work area.
9. Only can be changed the information in the enable fields.
10. Once changed the values, click on the button to save the guide number.
11. Click on the button to close the pop up confirmation message.
Displaying the Produce Receipt
1. Access transaction code /AGRI/FMPRM.
2. Click on the button Search, to open the searching options screen.
3. Click on selected fields to activate ones, in order to make the searching.
4. Click on the button or press F4 on the keyboard to open a new window with the data element list.
5. Fill in with desired values.
6. Click on the button to execute the searching.
7. Click on the Ticket N° value from the search tab to display the guide information is the Work area.
8. There can be displayed any tab whenever the user wants.
Reverse the Produce Receipt
1. Access transaction code /AGRI/FMPRM.
2. Click on the button Search, to open the searching options screen.
3. Click on Status field to activate it.
4. Click on the button or press F4 on the keyboard to open a new window with the data element list.
5. Select the option C.
6. Click on the button to execute the searching.
7. Click on the Ticket type column from the search tab.
8. Must be filter the values S or N, using the filter option
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
118
9. Click on the Ticket N° value from the search tab to display the guide information is the Work area.
10. Click on the reversal button, to create a new guide with the same information from the selected guide.
11. Click on the button, to confirm the reversal.
12. Click on the button to close the pop up confirmation message.
13. At the bottom screen appears the created guide number as a message notification.
14. Click on the button Search, to open the searching options screen.
15. Click on Ticket Number to activate it.
16. Fill in with the new guide number.
17. Click on the button to execute the searching.
18. Click on the button to process the guide and reverse the last one.
19. Click on the button to close the pop up confirmation message.
20. Click on the logs button to display the reversal status per each logistic process.
Delete the Produce Receipt
1. Access transaction code /AGRI/FMPRM.
2. Click on the button Display <--> Change, to enable the modification.
3. Click on the button Search, to open the searching options screen.
4. Click on Status field to activate it.
5. Click on the button or press F4 on the keyboard to open a new window with the data element list.
6. Select the option S.
7. Click on the button to execute the searching.
8. Click on the Ticket type column from the search tab.
9. Must be filter the values S or N, using the filter option
10. Click on the Ticket N° value from the search tab to display the guide information is the Work area.
11. Click on the delete button, to delete the selected guide.
12. Click on the button, to confirm the deletion.
Application Help PUBLIC
SAP Farm Management by Vistex March 30, 2020
Application Help – Version: 1.0 – Final © 2020 Vistex, Inc. All rights reserved.
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
119
www.sap.com/contactsap
© 2020 SAP SE or an SAP affiliate company. All rights reserved.
No part of this publication may be reproduced or transmitted in
any form or for any purpose without the express permission of
SAP SE or an SAP affiliate company. The information contained
herein may be changed without prior notice.
Some software products marketed by SAP SE and its distributors
contain proprietary software components of other software
vendors. National product specifications may vary.
These materials are provided by SAP SE or an SAP affiliate
company for informational purposes only, without representation
or warranty of any kind, and SAP or its affiliate companies shall
not be liable for errors or omissions with respect to the materials.
The only warranties for SAP or SAP affiliate company products
and services are those that are set forth in the express warranty
statements accompanying such products and services, if any.
Nothing herein should be construed as constituting an additional
warranty.
SAP and other SAP products and services mentioned herein as
well as their respective logos are trademarks or registered
trademarks of SAP SE (or an SAP affiliate company) in Germany
and other countries. All other product and service names
mentioned are the trademarks of their respective companies.
Please see https://www.sap.com/about/legal/trademark.html for
additional trademark information and notices.