Ulterion 245 PA
1
Contains no phosphorus Stable in presence of hypochlorites Good anti-scaling efficiency at low dosage over wide ranges of pH, water hardness and temperature conditions. Strong dispersant activity FDA approved for food contact Product Description Ulterion ® 245 PA is a low molecular weight, 20% partially neutralized, Sodium salt, polyacrylate polymer that is designed to inhibit deposition of carbonates, oxalates, and sulfates scales across a broad range of pH, temperature and water hardness, as well as to control deposition of commonly encountered particulate matter. Typical Properties Solids, % 48 pH, 25°C 3.6 Molecular Weight 4,500 (Mw) Charge Anionic Appearance Clear to Slightly Hazy Specific gravity 1.24 Viscosity (cPs) 800 Origin USA FDA Status Ulterion ® 245 PA comply with the FDA Food Additives regulations: 173.310 Boiler water additives 175.105 Adhesives 176.170 Components of paper, paperboard in contact with aqueous and fatty food. 176.180 Components of paper, paperboard in contact with dry food. Industrial water treatment Application Methods Ulterion ® 245 PA prevents scale formation in open recirculation cooling circuits and is particular for CaCO3 scale inhibition. It also is a dispersant for all types of cooling circuits and for boiler sludge control. Handling / Storage Stability Ulterion ® 245 PA should be stored in a temperature-controlled environment. Insulated tanks are recommended for bulk storage. These products are freeze-thaw stable. However, if frozen, product must be mixed thoroughly prior to use. It is recommended to keep Ulterion ® 245 PA from freezing. For spills of Ulterion ® 245 PA sprinkle sawdust or vermiculite over the spill area and sweep the material into approved chemical disposal containers. Product Safety When considering the use of Ulterion International products, please refer to the latest Material Safety Data Sheets (MSDS). If you require an MSDS for this product; please call (706) 654-2222 or your Ulterion International Representative. ULTERION ® 245 PA DISPERSANT Performance Features MARKET USES
-
Upload
kurt-heinrich -
Category
Documents
-
view
217 -
download
0
description
FDA Status Application Methods Contains no phosphorus Stable in presence of hypochlorites Good anti-scaling efficiency at low dosage over wide ranges of pH, water hardness and temperature conditions. Strong dispersant activity FDA approved for food contact Product Description Product Safety Typical Properties Handling / Storage Stability Industrial water treatment
Transcript of Ulterion 245 PA
Contains no phosphorus Stable in presence of hypochlorites Good anti-scaling efficiency at low
dosage over wide ranges of pH, water hardness and temperature conditions.
Strong dispersant activity FDA approved for food contact Product Description Ulterion® 245 PA is a low molecular weight, 20% partially neutralized, Sodium salt, polyacrylate polymer that is designed to inhibit deposition of carbonates, oxalates, and sulfates scales across a broad range of pH, temperature and water hardness, as well as to control deposition of commonly encountered particulate matter. Typical Properties
Solids, % 48 pH, 25°C 3.6 Molecular Weight 4,500 (Mw) Charge Anionic Appearance Clear to Slightly Hazy Specific gravity 1.24 Viscosity (cPs) 800 Origin USA
FDA Status Ulterion® 245 PA comply with the FDA Food Additives regulations: 173.310 Boiler water additives 175.105 Adhesives 176.170 Components of paper,
paperboard in contact with aqueous and fatty food.
176.180 Components of paper, paperboard in contact with dry food.
Industrial water treatment
Application Methods Ulterion® 245 PA prevents scale formation in open recirculation cooling circuits and is particular for CaCO3 scale inhibition. It also is a dispersant for all types of cooling circuits and for boiler sludge control. Handling / Storage Stability Ulterion® 245 PA should be stored in a temperature-controlled environment. Insulated tanks are recommended for bulk storage. These products are freeze-thaw stable. However, if frozen, product must be mixed thoroughly prior to use. It is recommended to keep Ulterion® 245 PA from freezing. For spills of Ulterion® 245 PA sprinkle sawdust or vermiculite over the spill area and sweep the material into approved chemical disposal containers. Product Safety When considering the use of Ulterion International products, please refer to the latest Material Safety Data Sheets (MSDS). If you require an MSDS for this product; please call (706) 654-2222 or your Ulterion International Representative.
ULTERION® 245 PA DISPERSANT
Performance Features MARKET USES
