Ulterion 140 WD
1
ULTERION ® 140 WD COATING LUBRICANT Imparts coating uniformity Water dispersible Imparts high temperature lubricity FDA approved for food contact Product Description Ulterion ® 140 WD is a 100% active coating lubricant designed specifically to improve the runnability of high speed coaters. Its unique molecular composition imparts rheological and water holding characteristics to all types of paper coating and sizing formulations. Ulterion ® 140 WD effectively reduces or eliminates such coatings problems as streaking, whiskering and blade weeping. When used in sizing applications, Ulterion ® 140 WD also eliminates dryer can build up. Analytical Data Acetone insolubles Min 55 % Gardner color Max 14 Moisture Max 1.0 % Acid value Max 28 Viscosity Max 9000 cps Typical Properties % Solids 100 pH 7.0 Odor Organic Appearance Milky Golden Color Specific gravity 1.07 Viscosity (cps) 20 - 350 Origin USA FDA Status Ulterion ® 140 WD is composed of ingredients, which are in compliance with FDA for direct and indirect food contact (21CFR 176.170 & 21CFR 176.180). Paper coatings Application Methods Ulterion International recommends that Ulterion ® 140 WD be used at a level of 0.75 – 1.0 part based on pigment solids for coatings and 0.5 – 1.0 part based on solids of starch or binder Ulterion ® 140 WD can be used with all types of binder systems as well as various pigments commonly used throughout the coating industry. If a desired viscosity is required that is higher than the base polymer, consult an Ulterion International Technical Services person for product recommendations. Handling / Storage Stability In its original packaging, Ulterion ® 140 WD can be stored for 12 months at a temperature of 77°F (25°C). Ulterion ® 140 WD should be stored in properly sealed containers, avoiding light and moisture. Product Safety When considering the use of Ulterion International products, please refer to the latest Material Safety Data Sheets (MSDS). If you require an MSDS for this product; please call (706) 654-2222 or your Ulterion International Representative PERFORMANCE FEATURES MARKET USES
-
Upload
kurt-heinrich -
Category
Documents
-
view
222 -
download
1
description
FDA Status Application Methods Ulterion ® 140 WD is composed of ingredients, which are in compliance with FDA for direct and indirect food contact (21CFR 176.170 & 21CFR 176.180). Product Description Product Safety Analytical Data Typical Properties In its original packaging, Ulterion ® 140 WD can be stored for 12 months at a temperature of 77°F (25°C). Ulterion ® 140 WD should be stored in properly sealed containers, avoiding light and moisture. Handling / Storage Stability ®
Transcript of Ulterion 140 WD
ULTERION® 140 WD COATING LUBRICANT
Imparts coating uniformity Water dispersible Imparts high temperature lubricity FDA approved for food contact
Product Description Ulterion® 140 WD is a 100% active coating lubricant designed specifically to improve the runnability of high speed coaters. Its unique molecular composition imparts rheological and water holding characteristics to all types of paper coating and sizing formulations. Ulterion® 140 WD effectively reduces or eliminates such coatings problems as streaking, whiskering and blade weeping. When used in sizing applications, Ulterion® 140 WD also eliminates dryer can build up. Analytical Data
Acetone insolubles Min 55 % Gardner color Max 14 Moisture Max 1.0 % Acid value Max 28 Viscosity Max 9000 cps Typical Properties % Solids 100 pH 7.0 Odor Organic Appearance Milky Golden Color Specific gravity 1.07 Viscosity (cps) 20 - 350 Origin USA FDA Status Ulterion® 140 WD is composed of ingredients, which are in compliance with FDA for direct and indirect food contact (21CFR 176.170 & 21CFR 176.180).
Paper coatings
Application Methods Ulterion International recommends that Ulterion® 140 WD be used at a level of 0.75 – 1.0 part based on pigment solids for coatings and 0.5 – 1.0 part based on solids of starch or binder Ulterion® 140 WD can be used with all types of binder systems as well as various pigments commonly used throughout the coating industry. If a desired viscosity is required that is higher than the base polymer, consult an Ulterion International Technical Services person for product recommendations. Handling / Storage Stability In its original packaging, Ulterion® 140 WD can be stored for 12 months at a temperature of 77°F (25°C). Ulterion® 140 WD should be stored in properly sealed containers, avoiding light and moisture. Product Safety When considering the use of Ulterion International products, please refer to the latest Material Safety Data Sheets (MSDS). If you require an MSDS for this product; please call (706) 654-2222 or your Ulterion International Representative
PERFORMANCE FEATURES MARKET USES
