Ulterion 245 PA
-
Upload
kurt-heinrich -
Category
Documents
-
view
223 -
download
2
description
Transcript of Ulterion 245 PA
Ulterion International, Inc.
P.O. Box 236
Braselton, GA 30517
Phone: 706-654-2222
Fax: 706-654-2234
www.ulterion.com
The information contained herein is thought to be accurate in all aspects; however, the
applications for these products mentioned are presented without guarantee or responsibility as to
the suitability of our products whether used singly or in combination with other products. Nothing
herein is to be taken as a license to operate under or as a recommendation to infringe any patents.
The products are sold without warranty, expressed or implied, and are purchased at buyer’s risk.
TECHNICAL BULLETIN
Contains no phosphorus Stable in presence of hypochlorites Good anti-scaling efficiency at low
dosage over wide ranges of pH, water hardness and temperature conditions.
Strong dispersant activity FDA approved for food contact Product Description Ulterion® 245 PA is a low molecular weight, 20% partially neutralized, Sodium salt, polyacrylate polymer that is designed to inhibit deposition of carbonates, oxalates, and sulfates scales across a broad range of pH, temperature and water hardness, as well as to control deposition of commonly encountered particulate matter. Typical Properties
Solids, % 48 pH, 25°C 3.6 Molecular Weight 4,500 (Mw) Charge Anionic Appearance Clear to Slightly Hazy Specific gravity 1.24 Viscosity (cPs) 800 Origin USA
FDA Status Ulterion® 245 PA comply with the FDA Food Additives regulations: 173.310 Boiler water additives 175.105 Adhesives 176.170 Components of paper,
paperboard in contact with aqueous and fatty food.
176.180 Components of paper, paperboard in contact with dry food.
Industrial water treatment
Application Methods Ulterion® 245 PA prevents scale formation in open recirculation cooling circuits and is particular for CaCO3 scale inhibition. It also is a dispersant for all types of cooling circuits and for boiler sludge control. Handling / Storage Stability Ulterion® 245 PA should be stored in a temperature-controlled environment. Insulated tanks are recommended for bulk storage. These products are freeze-thaw stable. However, if frozen, product must be mixed thoroughly prior to use. It is recommended to keep Ulterion® 245 PA from freezing. For spills of Ulterion® 245 PA sprinkle sawdust or vermiculite over the spill area and sweep the material into approved chemical disposal containers. Product Safety When considering the use of Ulterion International products, please refer to the latest Material Safety Data Sheets (MSDS). If you require an MSDS for this product; please call (706) 654-2222 or your Ulterion International Representative.
ULTERION® 245 PA DISPERSANT
Performance Features MARKET USES