Page 1of 4

File name:document.xls

PROCEDURE FOR WRC-107 CALCULATIONS FOR NOZZLES

Sketch

Step 1

Step 2

Step 3 A new window "COADE CALC" will open as in Step 4 below

Step 4 Goto 'Analysis'→'Choose Analysis type'→'WRC 107 / FEA'As shown below in sketch

Open PVElite

Go to Component Data Analysis by clicking →

Page 2of 4

File name:document.xls

Step 5

Step 6

Step 7

A new window will open. Click " +" new Item button

Click 'Import Nozzle Data from PVElit file' button

Select PVElite file by going to its location, a nozzle list will be displayed select the nozzle for which WRC Analysis is required and click 'OK'.

Page 3of 4

File name:document.xls

Step 8 COADE CALC picks up data of selected nozzle itself . Only Nozzle Loading Data to be added as shown below:

Note: This "Nozzle data" to be re provided for WRC analysis, again

Step 9 Save your program by Clicking

Page 4of 4

File name:document.xls

Step 10

Step 11

STEP 12

Analyze you program by clicking

Read at the end of Report.

If the results are Fail. Go to PVElite input file and increase the thickness or dia of nozzle or add a pad.

Unless you get Passed message