Trend Timbers | Laguna Tools Catalogue · Laguna 6” ShearTec II Jointer Laguna 8” Wedgebed...

w w w. t r e n d t i m b e r s . c o m . a u

TREND TIMBERSOne Stop Woodworking

Phone: +61 2 4577 5277Email: [email protected]: 15 Railway Rd North Mulgrave NSW 2756

TABLES SAWS

Laguna Fusion 10” tablesaw

Laguna Platinum 10" Tablesaw

Laguna Platinum Dovetail 10” Tablesaw

BANDSAWS

Laguna 14” Bandsaw 14 | Twelve

Laguna LT14 SUV Bandsaw

Laguna 18” Bandsaw LT 18 3000

PLANERS / THICKNESSERS

Laguna Planer 16” ShearTec II

Laguna Planer 20” 4 Post Planer

Laguna Planer 20” HD Planer

Laguna Planer 25” HD Thicknesser

JOINTERS

Laguna 6” Jointer

Laguna 6” ShearTec II Jointer

Laguna 8” Wedgebed Jointer with Shear-Tec

Laguna 8” Parallelogram Jointer with Shear-Tec


ROUTER AND SPINDLE MOULDING

Laguna Pro Spindle Moulder

LATHE

Laguna Lathe REVO 24 x 36 – 3HP



Laguna Fusion 10’ tablesawLT*FUSION-10/1



PRODUCT FEATURES

Wheels are built in

Fence Storage

Quick change riving knife & precision fence with Hairline readout

Push Stick is mounted onto the Rip Fence for convenience

Double Miter Slot

TECHNICAL INFORMATION

Motor: 1 3/4 HP, 1 phase

Blade Diameter: 10” (254mm)

Arbor: 5/8”

Max Dado: 13/16”

Quick Release Riving Knife: Yes

Safety Blade Guard: Yes

Rip Capacity Right: 36” (915mm) optional 52” (1320mm)

Rip Capacity Left: 12”(305mm)

Blade Tilt: 90°-45°

Cast Iron Table: 20” x 27” (508mm x 685mm)

Cast Iron Table Extension X 2: 12” x 27” (305m x 685mm)

Table Height: 34 1/2” (876mm)

Built-In Wheel System: Yes

Miter Slots x 2: 3/4” x 3/8” (19mm x 9.5mm)

Dustport: 4” (100mm)

Drive: 1 + 1 Belt

Weight Net/Ship: 266/349 Lbs. (120 / 158kg)



Laguna Platinum 10” TablesawLT*PLATINUM-10/1



PRODUCT FEATURES

Precision ground table made of premium grade cast iron, heat treated and ground to a mirror like finish.

Massive widely spaced cabinet mounted trunnions: perfectly machined to high accuracy to support the heavy duty saw carriage.

Quick release riving knife with access through throat plate.

Robust spindle supported by two precision ball bearings.

Triple V-belt drive system mounted between the two spindle bearings.

EZ—Glide T square system for accuracy, repeatability and easy operation.

Standard precisely machined miter gauge with adjustable miter bar.

Minimal vibration that ensures proper blade alignment.

CSA, UL, CE certified.


Motor: 3HP Leeson single phase

Blade Diameter: (250mm)

Left hand blade tilt: 0-45°

Depth of cut: 90˚| 80mm, 45˚| 57mm

Rip capacity: 762mm, Optional: 1300mm

Arbor spindle size: 16mm: Contact

Assembled table dimension: 1000 x 675 x 850mm H

Dado diameter: 200mm, Maximum width: 20mm

Mitre slots X 2: 19 x 9.5mm

Dust port: 100mm (E-Z remove)

Drive: 3 x V-belt

Weight: 220Kgs



Laguna Platinum Dovetail 10” TablesawLT*DOVETAIL-10/1



PRODUCT FEATURES

Precision ground table made of premium grade cast iron, heat treated and ground to a mirror like finish.

Heavy duty supported saw carriage in precision machined dovetails: perfectly machined to high accuracy to support the heavy duty saw carriage.

Quick release riving knife with access through throat plate.

Robust spindle supported by two precision ball bearings.

Triple V-belt drive system mounted between the two spindle bearings.

EZ—Glide T square system for accuracy, repeatability and easy operation.

Standard precisely machined miter gauge with adjustable miter bar.

Minimal vibration that ensures proper blade alignment.

CSA, UL, CE certified.


Motor: 3HP Leeson single phase

Blade Diameter: (250mm)

Left hand blade tilt: 0-45°

Depth of cut: 90˚| 80mm, 45˚| 57mm

Rip capacity: 1300mm

Arbor spindle size: 16mm: Contact

Assembled table dimension: 1600 x 675 x 850mm H

Dado diameter: 200mm, Maximum width: 20mm

Mitre slots X 2: 19 x 9.5mm

Dust port: 100mm (E-Z remove)

Drive: 3 x V-belt

Weight: 250Kgs



Laguna 14” Bandsaw 14 | TwelveLT*B/SAW-1412



PRODUCT FEATURES

Euro-style hinges & ceramic guides

Tension window, tracking window & tension indicator

Worm gear rack & pinion upper guide

Tension quick release

Cast iron wheels

Flat Poly-groove drive belt

Brass-tipped lock handle for rip fence

Adjustable anodized aluminium throat plate


Table 540mm x 405mm & height 965mm

90 “ positive stop

45° table-tilt right / 7° table-tilt left

Hi / low aluminium fence 460mm x 140mm x 12mm

Heavy duty cast trunion – 200mm x 330mm

Motor: 1 3/4 HP TEFC single phase

Blade length: 2920mm

Min-Max width of blade: 3mm – 19mm

Resaw capacity: 335mm

Throat Capacity: 330mm

Dust Port: 100mm

Dimensions: 635mm x 460mm x 1785mm high

Shipping dimensions: 1400mm x 565mm x 565mm

Weight: 117kgs


*Does not include blade*Please see our accessories for blade options.


Laguna LT14 SUV BandsawLT*B/SAW-14SUV



PRODUCT FEATURES

Strong table lock designed to last

Rubber-seals inside doors for improved dust collection & lower noise level

Windows for easy blade tracking adjustments

Large leveling pads for extra suitability

Large and well designed handles & wheels

Quick release blade tension

Foot brake with micro switch

Rack and pinion table tilt 45°R, 15°L

Rack and pinion upper guide


Motor: 3HP 1 Phase

Min-Max blade width: 0.125 – 25.4mm

Resaw Capacity: 355mm

Throat: 336mm

Blade Length: 3175mm

Cast Table Size: 500 x 400mm

Table Height: 900mm

Dust Ports: 100mm

Overall Height: 1778mm

Dimensions: 762 X 915 X 1905mm

Net Weight: 154kg

Weight (Ship): 170kg


14” of resaw capacity requires more power & blade width,

so Laguna equipped the LT14 SUV with a 3HP Leeson

motor & gave it a 1” blade capacity.

Coupled with the Laguna Resaw King blade, this saw

makes cutting large stock into smaller workpieces, OR

slicing wafer thin veneers a breeze.



Laguna 18” Bandsaw LT 18 3000LT*B/SAW18-3000




Motor: 3HP 1 Phase

Resaw capacity: 385mm

Throat: 440mm

Min-Max blade width: 3.0—31.75mm (1/8”-1 1/4”)

Dust Ports: 2 x 100mm

Cast Table Size: 510 x 510mm

Nitrogen cylinder table tilt

Blade Length: 3685mm

Table Height: 900mm

Overall Height: 1875mm

Gross Weight: 254kg

Net Weight: NW 238kg


Meet the ‘senior’ member of our Bandsaw family the LT18

3000 Series that has been designed to improve your

performance.

All of the Laguna innovations are included, such as the

patented and award winning Laguna Ceramic Guides,

massive three horsepower motor, rack and pinion tilt

system to tilt the table and counter balanced with a gas

spring.



Laguna Planer 16” ShearTec IILT*THICK-16/1



PRODUCT FEATURES

Depth of cut digital readout with tape backup

ShearTec ll helical cutter head

Mechanical adjustment of bed

Mechanical adjustment of bed rollers

2 cast iron extension tables

2 polished steel rollers for material return

Internal caster system for mobility


Width of cut: 400mm (16”)

Motor: 3 HP,1 PH

Table: 1400 X 400mm including 2 x extensions

6 Rows of 18 helical knives = 108 total

2 Feed Speeds: 4.8 & 6.0 metres / min

Dust-hood: 100mm

Max removal: 3mm (1/8”) per pass

Min-Max: 4.8—153mm (3/16” – 6”)

Dimensions: 875 x 1400 x 1125mm high

Net Weight: 258 kg

Gross Weight: 304 kg


With optional keypad lockout system fitted


Laguna Planer 20” 4 Post Planer



PRODUCT FEATURES


Table: 1442 x 508mm wide including 2 x extensions

6 rows ShearTec II helical cutterheads with four sided German carbide knife inserts



2 Cast iron extension tables

2 Steel rollers for material return

Internal caster system for mobility


Width of cut: 500mm (20”)

Motor: 3 HP, 1 PH | 5 HP, 3 PH

6 rows of 23 helical knives = 138 total knives

2 x feed speeds: 4.8 & 6.0 metres / min

125mm dust hood

Max removal: 3mm per pass

Min-Max depth of cut: 4.8mm – 203mm (3/16” – 8”)

Overall dimensions with cast iron extension tables installed: 990 x 1524 x 1143mm high

Net Weight: 399kg

Gross Weight: 449kg



Laguna Planer 20” HD PlanerLT*THICK-20HD/3



PRODUCT FEATURES

500mm (20”) width of cut


6 rows ShearTec II helical cutterheads with four sided German carbide knife inserts



Fully enclosed cabinet


Motor: 10 HP, 3 PH

6 rows of 23 helical knives = 138 total knives

2 x feed speeds: 4.8 & 6.0 metres / min

125mm dust hood

Overall dimensions with cast iron extension tables installed: 990 x 1575 x 1170mm high

Weight: 544kg



Laguna Planer 25” HD ThicknesserLT*THICK-25IND3



PRODUCT FEATURES

Solid cast Sheartec II helical head with four-sided insert tooling,

Built with digital readout & simple PC controller

Segmented infeed roller with segmented chip breakers

Infeed & outfeed rollers are supported by four large & sealed needle bearings for long life

Table rollers built with a quick-set lever to raise & lower the table

Heavy cast iron frame & extra wide side panels with gibs

Large precision ground table contains two adjustable table rollers

3 speed feed selector allows quick feed rate changes

10 pieces 4-sided carbide inserts with 10 screws & 2 screwdrivers

Ø150mm / Ø127mm dust port adaptor

4 foot pads


Motor: 11100W/415V (3PH -15HP)

Max planning width: 635mm

Planning thickness: 4-230mm

Max chip removal: 6mm

Feed speed: 6, 8, 10m/min

Segmented infeed roller dia.: 76mm

Steel outfeed roller dia.: 65mm (x2)

Bed rollers: 2

Table size: 820 x 660mm

Max work piece length: 250mm

Cutter block speed: 5000RPM

Cutter block dia.: 86mm

No. of knives helical head: 174

Weight: 720Kgs

Dimensions: 1320 x 915 x 1500mm



Laguna 6” JointerLT*JOINTER-6/1



PRODUCT FEATURES

3 High Speed Steel blades

1422mm long bed allows for longer work pieces

Enclosed steel stand

In-feed table adjustment wedge bed with lever


Motor 1.5 HP

Single phase Cutter-Head: 5000 RPM

Cutting Width: 150mm

Cutting Depth: 12.5mm

3 HSS Blades

Cutter-Head Diameter: 60mm

Table Dimensions: 150 X 1422mm

Fence Dimensions: 100 X 736mm

Fence Tilt: 90° & 45° with Positive Stop

Table Height: 805mm

Dust port: 100mm



LT*JOINTER-6/1H



PRODUCT FEATURES

6 row ShearTec II helical cutterhead Deep gullets in the head allow chips to exit fast & keep the machining area clear of chips

42 four-sided German carbide helical cutter inserts set into the head on a flat landing surface which allows more torque to be applied when fixing

Inserts are slightly angled to give a shear type cut with low impact and less kick-back

Insert leading edge crowned to prevent lines appearing

6 rows of cutters in each head for premium results

1422mm long bed allows for longer work pieces


In-feed table adjustment wedge bed w lever


Motor 1.5 HP

Single phase Cutter-Head: 5000 RPM

Cutting Width: 150mm

Cutting Depth: 12.5mm

4 Sided Solid Carbide

6 Rows X 7 = 42 inserts


Table Dimensions: 150 X 1422mm



Table Height: 805mm

Dust port: 100mm


Laguna 6” ShearTec II Jointer


LT*JOINTER-8/1W



PRODUCT FEATURES

Oversized table give maximum support for long work pieces

Precision ground cast in and out feed tables feature independent adjustment on dovetail ways

Deep gullets in the head allow chips to exit fast & keep the machining area clear of chips

Inserts are slightly angled to give a shear type cut with low impact and less kick-back action


Inserts leading edge crowned to prevent lines appearing

6 rows of cutters in each head for premium results



Motor: 2HP single phase 10A

Cutter-Head: 5600 RPM

Fence Tilt: 45 Degree. 90 ° & 45 ° positive stop

Width of cut: 200mm

Depth of cut: 12.5mm

Rabbeting capacity: 12.5mm

4 Sided carbide inserts 6 Row X 9 = 54


Table Dimensions: 228 x 1803mm


Table height: 800mm

Weight: 231kg

Dust port: 100mm


Laguna Jointer 8” Wedgebed Jointer with Shear-Tec

Oversized table give maximum support for long

work pieces.

Precision ground cast in and out feed tables

feature independent adjustment on dovetail ways

Deep gullets in the head allow chips to exit fast &

keep the machining area clear of chips.

Inserts are slightly angled to give a shear type cut

with low impact and less kick-back action.


LT*JOINTER-8/1



PRODUCT FEATURES

Adjustment: Parallelogram with crank allows the table to move in the same arc as the cutter-head when raised or lowered, keeping clearance to a minimum.

6 row Shear Tec II helical cutter-head for premium results

Deep gullets in the head allow chips to exit fast and keep the machining area clear of chips


Inserts angled to give a shear cut with low impact and less kick-back action—edge crowned to prevent lines appearing Built in mobility wheels with locking screws

Fully enclosed steel cabinet protects motor and mechanics

2108mm long bed allows for very long work pieces


Bed length: 2108mm

Motor: 3 HP single Phase, 15 Amp

Cutter head: 5200 RPM

Cutter-head diameter: 75mm

4 sided carbide inserts 6 rows x 9 = 54

Width of cut: 200mm


Table dimensions: 2108 x 200mm

Fence dimensions: 914 x 127mm

Table height : 838mm

Dust port: 100mm

Overall dimensions: 2108 x 635 x 1193mm

Weight: gross 319kg, net 248kg




LT*12”L/BEDJOIN



PRODUCT FEATURES

Adjustment: Parallelogram with crank allows the table to move in the same arc as the cutter-head when raised or lowered, keeping clearance to a minimum.

6 row Shear Tec II helical cutter-head for premium results

Deep gullets in the head allow chips to exit fast and keep the machining area clear of chips


Inserts angled to give a shear cut with low impact and less kick-back action

Edge crowned to prevent lines appearing

Built in mobility wheels with locking screws

2210 x 305mm bed allows for very large work pieces

Fully enclosed steel cabinet protects motor and mechanics


Bed size: 2210 x 305mm

Motor: 3 HP 1 Phase or 5 HP 3 Phase

Cutter head: 5500 RPM

Cutter head diameter: 100mm (4”)

4 sided carbide inserts 6 rows x 14 = 84

Width of cut: 300mm

Rabbeting capacity: 19mm

Fence Tilt: 90°, 45° & 135°

Positive stops: 90° & 45°

Fence dimensions: 1524 x 137 mm

Table height : 838mm

Dust port: 152mm

Overall dimensions: 2235 x 838 x 1130mm

Gross Weight: 488kg

Net Weight: 399kg



Choice of 3 HP Single Phase or 5 HP Phase Three motor.


LT*S/MOULDER/3



PRODUCT FEATURES

Standard digital readout

Heavy duty motor

Quick change poly-groove belt system

Each full revolution of the turn handle gives an exact 1.5mm adjustment to the fence

Pre-drilled holes to accept most power feeders

Wheel kit built right into the machine base


Motor: 7 1/2 HP 3 Phase 415V

Table size: 998 X 798 X 89mm

Spindle travel: 101mm

Spindle size: 19mm and 31mm

Spindle speeds: 5000 / 7000 / 10000 RPM

Table opening diameter: 185mm

Direction: forward / reversing switch

Fence: micro adjustment

Net Weight: 290kg

Ship Weight: 326 kg


Laguna Pro Spindle Moulder


LT*LATHE24-36



Laguna tools is leading the Revo-lution in lathes. The new

generation lathe has more mass than an other machine in

its class, less vibration and a revolutionary servo motor drive

system for much higher torque in low RPM.

Expect the REVO to exceed your expectations.


Motor Power: 3HP single phase reversible

Swing over bed: 609mm

Distance between centres: 900mm

Swing over tool rest base: 508mm

RPM: 200—3500 (high) / 50-820 (low)

Floor to spindle centre height: 1117mm

Maximum outboard turning swing: 863mm

Spindle size: 1-1/4 x 8(RH) TPI

Spindle bore: 16mm / 5/8”

Hole through tailstock: 9.5mm / 3/8”

Tailstock quill travel: 115mm

Tool rest width: 355mm

304mm cast extension with swing away park system

Face Plate: 75mm

Net Weight: 349kg

Ship Weight: 408 kg


Laguna Lathe REVO 24 x 36 – 3HP

Trend Timbers | Laguna Tools Catalogue · Laguna 6” ShearTec II Jointer Laguna 8” Wedgebed...

Documents

Transcript of Trend Timbers | Laguna Tools Catalogue · Laguna 6” ShearTec II Jointer Laguna 8” Wedgebed...