The Lumberman's Exchange brought to you by LBXonline.com

DEALS OF THE MONTH

WWW.LBXONLINE.COM

For classifieds call (800) 315-9950 or (615) 349-1890 or

With your smart phone: Scan QR Code to visit—

'06 HYDRO AX 321 FB W/KOEHRING 16" SAW

Reduced! Runs Great!!Item ID: 12551Contact: TomPh: 800-315-9950 x604

Priced to Sell Fast!Item ID: 12579Contact: DarenPh: 800-315-9950 x603

1987 COMPLETE CLEEREMAN MILL

Since 1986 - The Original (800) 315-9950 or (615) 349-1890

August 2012

For Classifieds Call Your LBX REP at 1-800-315-9950 August 2012 3

Traveling Arch SawHydraulically controlledNo manual cuttingOur most popular turn key system

Portable Yard SawModel 200MP-7-SS GasModel 100MP-7-SS Electric3 inch side shift, a standard feature

Automatic Strapping SystemAttach bottom crossersSide squeeze incorporatedPolyester strap Flush End Bump Rollcase

Reduce or eliminate your end trims

L-M Deck Cut Off Saw3 foot to 12 foot bar lengthsHydraulically controlled

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL!

The New L-M �“I-CUT�” Bundle cross cut system!* 60�’ long frame to precision cut your I-Joists* Precision accuracy of +- 1/32�”* Shorter system are available to process all your cutting needs* Tremendous labor savings, Guaranteed!

L-M Equipment Co. LtdPhone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: [email protected]

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

4 The Original Lumberman’s Exchange Visit us online at www.LBXonline.com!


FOR CLASSIFIEDS Call 800.315.9950

See pictures, prices, and Location of all equipment at

www.LBXonline.com

CHIPPERS2008 Dynamic 585 Chipper - Factory Rebuilt with upgraded components including new discharge chute, new larger bearings, new larger feed pins, new access panels to chip chamber wear plates. JD 500 HP engine with 2200 hours. Limited factory warranty on upgraded features. - Item ID-12059 - Tom 800-315-9950 x60448” Precision Chip Pack - Precision 48” 3 knife chip pac, 5x5 screener, with a brand new Y valve, 100 hp electric motor on the chipper, 15 hp motor on the blower, and a 3hp motor on the shaker. This machine is in very good condition and is ready to work. There is a vibrating conveyor available with this machine. Ask about details and price. - Item ID-12128 - Daren 800-315-9950 x60348” Precision Chip pack - 48” Precision Chip pack item is currently being refurbished and will have new knives, new holders, new bearings, new paint, and a 30 day warranty. This machine will be ready to work!!! Before and after photo - Item ID-12484 - Daren 800-315-9950 x603Precision 58” Chip Pack - Complete refurbished Precision 58” Chip Pack. This machine is been completely refurbished and is ready to work. - Item ID-12233 - Daren 800-315-9950 x603Precision 58” Chipper - Complete rebuilt Precision 58” Chipper with Factory

Original

The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/ad-vertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lumberman’s Exchange, its prin-ciples and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out written consent.

©2012 by Woods Publishing.

Your #1 Source for Forest Industry

Products!

The Lumberman’s Exchange is published monthly and is circulated internationally to sawmills, loggers, pallet makers, recyclers and industrial wood-working plants.

PUBLISHER Woods Publishing

ADVERTISING SALES Morris Woods (615) 349-1890 [email protected]

DESIGN DIRECTOR Heninger & Associates [email protected]

EQUIPMENT REPS Equipment Representative Daren Bodine (800) 315-9950 x603

Equipment Representative Tom Hirt (800) 315-9950 x604

MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax

AD SUBMISSIONS May be sent to— [email protected]

POSTMASTER Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402

** INFO LINK **AJD Forest Products ................30Amark ..........................................7American Leasing & Financial ..7B & B Mfg. .................................27B. H. Payne ................................13Baker .......................................6, 9Bandit ........................................23Bartlett Saw Service ................26Bay Equipment .........................37Brewer Eagle ...............................4Buck Equipment (AIM) ...........29Built Rite ...................................15Cone Machinery .........................1Cord Master ..............................12Corley Mfg .................................33CRD Metalworks .......................24Dyna Products ..........................18Jackson Lumber .......................32Kasco-SharpTech .....................10 Lignomat ...................................20

Litco ...........................................13LM Equipment, Canada .............3M&F Gauge ................................14Machinery Sales Co., Inc. ..........8Midwest Sharpening Service ..19Multitek .....................................16Paul Bunyon Show ................39Phase-A-Matic ...........................20Piper’s Saw Shop ......................17Resource Recovery ..................35Rotochopper ............................40Row Electric..............................25Sawmill Exchange ....................31Suffolk Machinery ......................2Thomas Tire, Commercial ......28Tri-Rivers Logging ....................10US Blades ..................................36Weaver Electric ........................22Wood-Mizer .........................11, 21

** CALENDAR **WOODSMEN’S FIELD DAYSComing August 17–19, 2012 Bonneville, New Yorkwww.starinfo.com/woodsmen/

INTERNATIONAL WOODWORKING FAIRComing August 22–25, 2012 Georgia World Congress Centerwww.iwfatlanta.com

GREAT LAKES LOGGING CONFERENCEComing September 6–8, 2012 OshKosh, Wisconsinwww.timberpa.com

NATIONAL HARDWOOD LUMBER ASSOCIATION (NHLA)Coming September 12–15, 2012

www.nhla.com/convention

THE PAUL BUNYON SHOW The Original American Forestry ShowComing October 5–7, 2012 8 a.m. – 5 p.m. Friday and Saturday 8 a.m. – 3 p.m. Sunday Guernsey County Fairgrounds Old Washington (Cambridge), Ohio

MID-SOUTH FORESTRY EQUIPMENT SHOW Details at www.midsouthforestry.orgComing October 5 & 6, 2012 Starkville, Mississippi Book Space Soon! Choice site going fast!

11 PBS Ad 4.125x10.875.indd 1 6/23/11 8:09 AM

If y

ou

ne

ed

to

Ch

an

ge

yo

ur

Ad

dre

ss o

r

Ad

d Y

ou

r N

am

e t

o o

ur

ma

ilin

g l

ist,

th

en

p

lea

se c

om

ple

te t

his

fo

rm a

nd

ma

il t

o:

The

Original

Ple

ase

Add

Ple

ase

Chan

ge

Ple

ase

Rem

ove

Co

mp

an

y N

am

e*

*Com

pany

nam

e an

d ad

dres

s re

quire

d to

pro

cess

you

r cha

nge.


The Most

Popular Band

Resaw in the

World!

The Model “A” Baker Band Resaw:One of the All-Time Greats!

[email protected]: (800) 548-6914www.logtolumber.com

DEALS OF THE MONTH

-JULY-'95 VALMET 503 w/KOEHRING 16" SAW HEAD

Totally Rebuilt!Item ID: 12545Contact: TomPh: 800-315-9950 x604

Motivated Seller!Item ID: 12567Contact: DarenPh: 800-315-9950 x603

'04 PRENTICE 384 LOG LOADER W/CTR DELIMBER

WWW.LBXONLINE.COM

For classifieds call (800) 315-9950 or (615) 349-1890 or

With your smart phone: Scan QR Code to visit—

EQUIPMENTREPRESENTATIVES

Daren Bodine Phone: 800-315-9950

Ext. 603

Tom HirtPhone: 800-315-9950

Ext. 604

CALL US TODAY FOR ALL YOUR USED

EQUIPMENT NEEDS!

FREE EQUIPMENT LISTINGS! CALL –(800) 315-9950

Michelle BodinePhone: 800-315-9950

Ext. 606

Warranty. - Item ID-12232 - Daren 800-315-9950 x603º

COMPLETE SAWMILLS

Circle Sawmill - Includes Mellot conveyor, Carthage carriage, Helle setworks, Helle log turner, hydraulic power pack 25-hp, 100hp electric motor, 25hp electric motor and all starters. - Item ID-11992 -

Michelle 800-315-9950 x603Frick Automatic Sawmill - 3 Head Block, Tyrone Berry Feed, 250 H.P. Cummins Power Unit, 4 Strand Live Deck With Stop And Load, Chain Type Log Turner, Frick Edger, Live Rollers, 30 Ft. Live Belt, 18 Ft. Green Chain. Ready To Work! - Item ID-12217 - Chris 800-315-9950 x600Meadows #2 Sawmill - Meadows #2 carriage - 15’ OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk - clock face lumber dial - controls for setworks & dogs. Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp electric motor. Mellott log turner. 35’ log deck with stop & load. 130KW generator. - Item ID-11086 - Michelle 800-315-9950 x603

FIREWOOD PROCESSORSBest Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses


FINANCE YOUR EQUIPMENT PURCHASE TODAYNo Down Payment on Most TransactionsApplication Only up to $100,000Programs in “All Fifty States”Loans and Leases AvailableSame Day Approvals—Next Day Funding

(800) 644-1182(503) 679-7370 Cell

Email: [email protected]: www.americanlf.com

Jake HebenstreitFinance Consultant

Let us reprocess them $25 per 100

Now have Factory Seconds $25 per 100 sticks

Save Your

Stubs & Pieces!

Now AcceptingVisa & Mastercard

'05 KENWORTH T-800 W/ROTOBEC MT27 LOADER

Item ID: 12612Contact: MichellePh: 800-315-9950 x606

www.LBXonline.com

4-way wedge adjustable to single two way. Great Value! PA - Item ID-12062 - Tom 800-315-9950 x604New 2010 Puma Model 18GM Firewood Processor - Brand New. Can produce up to 2 cords/hour. The 18 GM Firewood processor is the introductory PUMA model. Standard features include a live deck, fold-able stacking

conveyor, and a foldaway hitch for easy storage. The 18GM Firewood processor is capable of splitting up to two cords per hour at the centralized operator station. The 18GM is built with heavy-duty construction, offers a

quiet Honda engine, and is perfect for the small start-up operation or weekend warrior. - Item ID-12299 - Tom 800-315-9950 x604Portable Firewood Processor with Circle Saw - Firewood Processor with a 48” Circle Saw, Powered

by a 6cyl Perkins Diesel, 165 hp, 20’ conveyor, Pintle hitch, 6way wedge, It is a heavy-duty machine in ready to work condition. - Item ID-12435 - Michelle 800-315-9950 x603Shop Built Portable Firewood Processor


Mereen-Johnson 48” RipsawPaul Gang RipsawRaimann/Weinig KR450MRipsaw SystemSalem Late Model Combination Edger

FILING ROOM EQUIPMENTArmstrong 3-10C Stretcher RollArmstrong Dual Side GrinderArmstrong No. 4 B.S. Stretcher RollArmstrong No. 4 LH B.S. GrinderArmstrong No. 4 RH B.S. GrinderArmstrong No. 25 CircleArmstrong No. 90 Equalizer Gockel 163” Mag Bed GrinderHanchett DN-40 Knife GrinderHanchett Knife Grinders (10)Hanchett VR120 Mag Bed Newman G-200 GrindersVollmer Cana E (8)Vollmer CH210 Auto Sharpeners (2) Weinig R 934 Profile Grinder Wright Mod. 1801 (3) Wright W-1600 Auto Tipper

HOGS & PULVERIZERSGruendler 50XE Hammer HogJacobson Hammer Mill Jeffrey 36 x 60 ShredderJeffrey 76WBH Horiz. HogWest Salem Big Brute GrinderWilliams 30KS Hammer Hog

MISCELLANEOUS5-Arm Hyd. Tilt Hoist 10’ Hydraulic Lumber StackerCEMCO Combination Planer/Sander Fruilmac End MatcherHurricane 28” Chop Saw Industrial 3496 Finger JointerIndustrial FJS-25 Finger J. SystemIrvington 20’ Trimmer, 1’ Saws

(866) 241-2977

OVER 13 ACRES OF GREAT BUYS ON USED EQUIPMENT!For complete equipment list, visit our website:www.machinerysales.com

OR CALL AND ASK FOR DEPT. LX

Woods Planers 412M, 414M, 407M, 409M. 415M Woods Moulder 132M

Yates Planers A-20, A-62, A-66 Stetson-Ross Planers 6-12-A1, 6-12-C1, 6-10-A1, 6-14-D1

Mattison Moulders 276, 226, 228SAVE BIG ON MOTORS AND MAJOR PARTS!

WE ARE PARTING OUT

WORLD’S LARGEST INVENTORYNew & Used Sawmill & Planing Mill Equipment

9802 North Vancouver Way

Portland, Oregon 97217

WE ARE OVERSTOCKED! PRICES REDUCED!TAKE ADVANTAGE OF THIS CHANCE TO SAVE BIG!

BANDMILLS & HEADRIGSKockums 6’ Air Strain BandmillL&B 6’ Air Strain TwinsMcDonough 62” Twin Air StrainSalem 6’ Air Strain BandmillSalem 5’ Air Strain Bandmill

CARRIAGES & DRIVESCorley 40” Hydraulic 3-Block Salem 42” 4-Block CarriageSalem 60” 4-Block CarriageSalem Linear 36" 2-BlockTyrone 240 Hydraulic Drive USNR 2000, 42" Stud Carriage

CHIPPERS & SCREENSArasmith Lilly Pad ChipperBM&M 5’X14’ Screen BM&M Chip ClassifierCM&E 36” RechipperCM&E Model 60 Horizontal Feed Kockums 66” Horiz. Feed Precision 8x8 ScreenPrecision 48” 8-Knife Drop F.Precision 66" Horizontal F.Precision 96” Whole LogPrecision 118” HFBD ChipperRotex 6’X16’ ScreenWest Salem 58” Horizontal Feed

DEBARKERSNicholson 22” A-5 Debarker

EDGERS, GANGS & RIPSAWSGlobe Panel RipsawGlobe Strip SawKimwood Short Block Ripsaw

L&M Log Cut-Off SawsLumber Stackers (2) Peerless 24-Unit Bins (2)Tektronix Log Metal Detector Timesaver Sanders (6)

PALLET EQUIPMENTPallet Repair Systems NailerSmetco Pallet Turner

PLANERS & MOULDERSBuss 55 Double SurfacerBuss 88 Double Surfacer CEMCO Planer/Sanders (2)Coastal 16-Knife 9” Planer Pkg. Coastal 24” 20-knife PlanerDiehl 6-head TF MoulderMattison 226 12” MoulderMattison 228 16” MoulderNewman 382 Double SurfacerNewman M712 12-Knife Northfield Double SurfacerS-R 6-14-D1 24” 16-KnifeS-R Chip BlankersS-R 6-10-A1 10-KnifeStetson-Ross Timber SizerWadkin 6-Head MoulderWeinig 22A 5-HeadWeinig 22B Complete Line Weinig U22A, 6-head Weinig P22N 5-Head

RESAWS36” Tri-State Tilting ResawKockums 6’ Horiz. Twin Air StrainL&B 6' Setting HorizontalMcDonough 54” Twin HorizontalSalem 5’ Air Strain HorizontalSalem 6’ Horiz. Air Strain Smith Twin Horizontal ResawTurner 52” Rollfeed Resaw


Who’s the Boss? Sawing with a Baker BP Dominator™ Puts You Back In Charge.

Everything works the way you expect it to. ! e BP Dominator equips you to handle even the most trying jobs.

Your Log To Lumber Leader Since 1988

t's no fun being the boss of an operation that won't cooperate. Some-times it can seem like the operation is in charge of you, right? The new Baker BP Dominator™ 20-ft Stationary Band Sawmill

will fully comply with your wishes. The hydraulic controls and heavy duty design puts you back in charge. You sit at your control console and tell it what to do. Every order is followed through with top-notch precision and effi ciency, as the BP Dominator helps you quickly turn logs into high-dollar lumber, bang-bang-bang.

Show your logs who's boss! Invest in the Baker BP Dominator Stationary Band Sawmill.Contact Baker Products today.

t's no fun being the boss of an operation that won't cooperate. Some-times it can seem like the operation is in charge of new

will fully comply with your wishes. The hydraulic controls and heavy duty

Increase production by adding a Baker Stationary Circle Board Edger to your sawmilling operation. Circle Board Edger to your sawmilling operation. Circle Board Edger to your sawmilling operation. Circle Board Edger

will fully comply with your wishes. The hydraulic controls and heavy duty design what to do. Every order is followed through with top-notch precision and effi ciency, as the dollar lumber,

Stationary Band Sawmill

will fully comply with your wishes. The hydraulic controls and heavy duty

backedby parts& SERVICE

Fax: (800) 548-6914

[email protected] www.logtolumber.com

! e Model 3650E Stationary

Electric Baker Band Saw-mill is ! e BP Dominator.

Nicholson Drum Rechipper

(800) 319-8871

Exceptional Prices Excellent Service

BM&M Chip Screen

(800) 319-8871

Exceptional Prices Excellent Service

w/48” circle saw - Shop Built Portable Firewood Processor w/48” circle saw, enclosed cab, 3 strand live deck, diesel powered, mounted on 5th wheel trailer, over had over 100k invested before he pasted away. Family is open to offers on this machine - Item ID-12507 - Daren 800-315-9950 x603

FORKLIFTS1994 Moffett Truck Mount Fork Lift - Very clean machine. Runs well. Owner using now. 2686 Hours. Priced to sell. Great for delivering products or working in warehouse with high reach. This is a bargain! - Item ID-12321 - Tom 800-315-9950 x6042003 Taylor T-180 Fork Lift - 3220 Hours. 18,000 lb capacity. S/N S-C1-23338. Good running condition. Cummins 6BT3.9 engine.

Rear axle steer. Front Tires 14:00 x 24 at 60%. Rear tires 10:00 x 20 at 50%. Enclosed ROPS Cab. Two Stage Mast with Hydraulic tilt and side-shift. 6’ Lumber Forks. Priced to sell! - Item ID-12546 - Tom 800-315-9950 x6042004 Moffett Model M5500 Truck Mounted Forklift - 1418 Hours; Kubota Diesel; 4’ Forks, Side shift, 4 Way steer, 12’ Mast, Tires Front 31.5X13-16.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you. Top brand in the industry. Priced to sell. - Item ID-12069 - Tom 800-315-9950 x6042006 Taylor T-160 Articulated Fork Truck - 2700 Hours. 16,000 lb capacity. S/N S-A1-17076. Articulated 4-Wheel Drive. Detroit 4-71 engine. 17.5 x 25 Tires at 60%. Enclosed

Cab. Two Stage Mast with Hydraulic tilt and side shift. Very nice condition. Priced

to sell. - Item ID-12547 - Tom 800-315-9950 x604


2006 TIMBERPRO 810 LOG FRAME FORWARDER6,740 hrs.; excellent

condition; $165,000

Contact: Mark Dotson816.215.2297 orContact: Kim Dotson816.215.2298 [email protected]

2008 Timbco 425EXL w/Quadco Hot SawNew Undercarriage!

Item ID: 12574Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

HOGS/WOODGRINDERSWest Salem Grinder and Gen Set - Model WSM 2822, With a Cutler Hammer Soft start. There is also a full set of extra hammers that go with it plus one original from factory to use as a pattern when rebuilding the others with hard surfacing. The gen set is a 360 KW with a Big Cam 855 Cummins engine. Extremely low 670 Hours. Owner is negotiable. - Item ID-12386 - Daren 800-315-9950 x603

LOGGING EQUIPMENT1961 Caterpillar 944 Wheel Loader - Tire, Brakes, Bucket all are in good shape, Machine is Ready to

work Serial #43A1589 - Item ID-12156 - Daren 800-315-9950 x6031974 JD 440B Skidder - Very strong skidder. New center pin. New JD Clutch. New Turbo on engine. Pulls extremely well. 18” tires at 40%. - Item ID-12459 - Tom 800-315-9950 x6041976 Clark 664 Cable Skidder - Approximately 7500 hours. S/N 514F-2341-CAC. Strong Clark Winch; Tire chains; Pulls good. Front tires at 70%. Rears at 30%. Detroit 3-53 runs well. Center pin tight. Slight play in steering pin. Straight metal. Weighs about 18,000 lbs. Can haul on 10 ton

trailer. - Item ID-12249 - Tom 800-315-9950 x6041976 JD 440B - MINT CONDITION. WON’T FIND ANY BETTER THAN THIS! just over 3000 hrs. Excellent condition; New u bolts on the center shaft ( less than 6 mo ago); New front hyd pump ( one year ago); Center pins are tight; Does not burn oil; Like new set of bear paw chains on the front; Tires in excellent shape approx. 70 %; Not used for commercial logging, strickly firewood ( pulled tops); Never been repainted or redone, all original; Comes with complete spare tire and rim; Brand new 100ft of cable on winch line ( less than 2 mo ago); New seat; Clean operator station; Starts really well even when it is very cold. - Item ID-12494 - Tom 800-315-9950 x6041977 (est) JD 540A Cable Skidder - Nice little unit that still runs well. 28L tires at 35%. JD engine. Hour meter not working. - Item ID-12199 - Tom 800-315-9950 x6041977 Franklin 132XL

Forwarder - Nice machine. Runs good. Tires at 50%. - Item ID-12528 - Tom 800-315-9950 x6041978 Clark 666 Grapple Skidder - Strong skidder. Esco 26 grapple with winch. 28L x 26 tires at 60%. Open ROPS cab. Stick Steering. Detroit 4-53 engine. Runs good. - Item ID-12325 - Tom 800-315-9950 x6041979 JD 440C Cable Skidder - Rebuilt Deere 4 cyl. engine; Manual Transmission, Body- good, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400. Color - Yellow. VIN #: 440C334150T - Item ID-12091 - Tom 800-315-9950 x6041980 (est) JD 640C Reconditioned Swing Boom Grapple Skidder - Reconditioned John Deere 640C Skidder. Comes with hydraulic tilt decking blade & ESCO Model 212 Swing Boom Grapple - 72” Tongs, 4-way Hydraulic Tilt Blade c/w Brush Rake attachment, 23.1 x 26 Tires at 70%, Rear Wheel Skidder Tire Chain. #54. COMES WITH 30 DAY LIMITED WARRANTY. FOB: BC,


TRIED. TRUE. TRIED. TRUE. TRUSTED.TRUSTED.

CALL OR

GO ONLINE

FOR CURRENT

SAVINGS.

800.553.0182 SawLumber.com

*Price in U.S. dollars and subject to change without notice.©2012 Wood-Mizer Products, Inc. All rights reserved.


Highest Production

Lowest Maintenance

GUARANTEED!!!

Trailer: Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw: Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine: 50 to170 HP or PTO Drive with user’s tractor.

Hydraulics: Commercial Shearing

Splitter: 35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge. Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor: 16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

2040 ROGERS ROAD,PERTH ,ONTAR IO K7H 1P9CANADA

www.cord-master.comEmail : [email protected]

NEWGRAPPLESYSTEMNow Available!

Today!888-219-9663


When You Buy Your Circular Saws From B.H. Payne

Make Sure To Ask For Our Free, Complete Saw CatalogWe Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels, Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627Quality Brand

Reg. U.S. Pat Off

Circular SawsSaw Bits and Shanks

Circular KnivesCarbide Tipped Saws

Carbide Strobe ® SawsB.H. Payne & Company

Saw Manufacturers

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627

P.O. Box 90608

404 761-8711

“Since 1890”

E-mail: [email protected] Web Site: www.paynesaws.com

32’ Crosby

Conveyor Item ID: 12589Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

‘93 Mellott Debarker w/Sweeps& 2-Strand Green Chain

Item ID: 12608Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.comCANADA - Item ID-12550 - Tom 800-315-9950 x6041981 Dresser 510B - Dresser 510B Pay Loader, meter shows 8571 hours. Had a new Komatsu engine installed 3000 hours ago. Starts and runs great, tires are 85%. Comes with forks, owner also has bucket. - Item ID-12359 - Michelle 800-315-9950 x6031981 Hydro Ax 411B w/Koehring 16” Hot Saw - Strong Cummins 6BT 150HP engine with no blow by. 23.1 x 26 tires at 75%. Koehring Hot Saw has fresh teeth and runs well. Very nice machine for the price. - Item ID-12538 - Tom 800-315-9950 x6041983 Caterpillar 988B Loader with very low hours - Hours 5228, Caterpillar 3408T Engine, s/n# 50W06423 T246 988B, It has a Rayco Bucket that is 11’6” wide x 5’ tall (8 yard bucket). - Item ID-12375 - Daren 800-315-9950 x6031984 John Deere 640D Cable Skidder - NEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works well; Runs good. VIN #: 640DC513656 NC - Item ID-12092 - Tom 800-315-9950 x604

1988 Timberjack 450B Dual Arch Grapple Skidder w/winch - 2045 hours, 23.1 tires front 40% and rears are 50%+/-, Pins are tight, Machine is ready to WORK!! - Item ID-12512 - Michelle 800-315-9950 x6031989 Clark 666 Dual arch grapple skidder - The machine has a new cummins 5.9l engine with less than 300 hrs on it. A new grapple with around 50hrs, 2 new interstate batteries and a new starter on it. It fires right up even in the winter. This machine is ready to work!!! - Item ID-12219 - Daren 800-315-9950 x6031990 Volvo Grapple Truck - 1990 GMC Volvo WG64 tandem axle grapple crane truck. The GVW is 56000. Cummins diesel, horsepower 270. 9 speed manual transmission with spring suspension. No odometer only a hour meter. Hour meter reads 21965. The crane model number is BAR803-C S/N 18615. It has a 20’ reach. Has a steel bed and has a front GAWR of 16,000 and a rear or 44,000 with floatation steers. It has


REAL TUFF BALER&BAGGERTM

Phone: (325) 641-8300 Fax: (325) 643-3243Manufactured by M & F Gauge & Specialty Co., Inc.

www.realtuffbaler.com

$15,905

BUILT TO LASTReal Tuff Baler Dimensions & Specifications

using a two spool valve

starter not included

ponents are used

Effective May 1, 2012

‘85 Barko 550 Rail Mounted Material HandlerItem ID: 12573Contact: Tom

800.315.9950 Ext. 604

www.LBXonline.com

1999 Prentice 410E Art CarItem ID: 12572Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

‘97 Ford L9000

Item ID: 12602Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

John Deere

Arch Grapple SkidderItem ID: 12619Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

good tires and runs good, - Item ID-12495 - Tom 800-315-9950 x6041991 John Deere 548D Grapple Skidder - 1991 John Deere 548D Grapple Skidder with winch, machine is tight and ready to work - Item ID-12208 - Daren 800-315-9950 x6031992 Ardco Swamp Trencher - Model H-150. SN:1522. Only 2200 HRS. Very Good Condition.

DETROIT 6V71 with 310HP; Eaton heavy duty Hydrostatic Hydraulic Pumps and Motors = Sunstrand Hydraulic Drive = Funk double pump, 2800 series. Three Point Hitch for implement attachment Ditcher is a Dondi model 55 or 75. Enclosed cab with good working AC. Tires = 66 x 68:00 x 25 - 6 ply Super Wide Flotation Tires at 98%. This machine only

offered by Lumberman’s. Fantastic buy if you need to work in wet ground. Used to help drain swamps or work in other soft ground conditions. This machine almost walks on water! Service records and books available from owner. FOB: GA. - Item ID-12312 - Tom 800-315-9950 x6041992 John Deere 643 feller buncher - Complete rebuild & paint less than 1000 hrs ago. New 28 L tires under 300 hrs. Brand new ice chains are included. All pins are tight, cylinders are dry. Strong hydraulics & hydrostats. Strong 6.8 L turbo diesel, 175 hp, no smoke or blow by. Many new parts & hoses. Has some minor hydraulic leaks & minor slop in the accumulator arm. Great brakes. E -brake needs adjusting, back up alarm doesnt work. No heat or a/c. Has a 20” shear head. - Item ID-12285 - Chris 800.315.9950 x6001992 John Deere 643 Shear Feller Buncher - Complete rebuild & paint less than 1000 hrs ago. New 28 L tires under 300 hrs. Brand new ice chains are included. All pins are tight, cylinders are

dry. Strong hydraulics & hydrostatic transmission. Strong John Deere 6.8 L turbo diesel, 175 hp, no smoke or blow by. Many new parts & hoses. Great brakes. No heat or a/c. Has a 20” shear head. - Item ID-12537 - Tom 800-315-9950 x6041992 Peerless Drop Center Chip Trailer - One (1) Peerless Drop Center - Open Top - Chip Trailer 1992 Model - Serial#: 1PLE04426NPC80940 Model 44 - DC X 96” - Top Henge Rear Gate - Spring Suspension - Reyco. 11R24.5 Tires - Steel Disc Wheels - Good Floor 50 - 70% Tires - Except 2 that are 40% 50% Brakes. - Item ID-12341 - Tom 800-315-9950 x6041993 Prentice 210 Loader on Trailer - Very clean unit. Works well. Cummins engine. 9355 hours. Bar Saw hydraulics. Heat and AC. Some cosmetic dents. Great value. - Item ID-12289 - Tom 800-315-9950 x6041994 Husky 235XL Loader Package - Hour meter broken. OT Delimber Trailer; CTR 314 Cradle Delimber; Bar Slasher; Heat and AC work; Strong


Triple Multi-Wedge, Powered Feed Rolls, Circular Saw...

Coming SoonInsulated Operators Cab, Joystick Controls, 100 HP Kubota Diesel

(800) 757-2520 Built-Rite MFG., Corp. [email protected]

WOODSMEN’S FIELD DAYSSee Us August 17–19, 2012

‘10 CAT 564 ForwarderLow Hours!


www.LBXonline.com

1989 Int’l Clean-up Truckw/2004 Serco 8000 Ldr.


www.LBXonline.com

Loader; JD 160HP Engine. - Item ID-12445 - Tom 800-315-9950 x6041994 JD 640E Cable Skidder - Just over 10,000 hours; 23.1 x 26 Tires at 70%; Chains NOT included: Many updates-New Hydraulic Pump (6 months old), Rear end redone (3 Months ago); Hydraulic Control Block-New Seals (3 Months ago); Rebuilt Water pump (3 months ago). Unit running today. - Item ID-12500 - Tom 800-315-9950 x6041994 Timbco 425 Feller Buncher with Bar Saw Head - 9,142 Hours; 28in. Saw head; B Cummins Engine; Accumulator; Tracks need rails and sprockets; No leaks; Runs well; Ready to go and work. - Item ID-12417 - Tom 800-315-9950 x6041995 Bell Super T - Dangle Head bar Saw. 28L Tires

at 60%. Engine has issues and does not run. All components are there. Parts machine, or one to fix up and use. Priced cheap! Serial Number BCH3660 - Item ID-12470 - Tom 800-315-9950 x6041995 Caterpillar 518C Grapple Skidder - 1995 518C Caterpillar log skidder. This machine is clean and is ready to go to work. Over $12,000 worth of work has been done to this machine(All workorders can be e-mailed). All belly pans and sheet metal were removed for steam cleaning. We have rebuilt the hinge pins and the steering pins. We changed the front and rear seals in the transmission, and the pinion seals in both differentials. The radiator has been repaired. It has new fan belts and hoses.

The steering valve, grapple valve, and brake valves were rebuilt. All cylinders have been repacked. The Lufkin winch has been rebuilt with new clutch packs. Installed new door latches. Doors open and close good. All fluids and filters have been changed. The tires are 28L- 26 in size and the tread will

average about 99 percent. Machine has been sanded and painted. The engine cranks up instantly and the transmission shifts good - Item ID-12302 - Daren 800-315-9950 x6031995 JD 290D with Hytec 4700 Harvester Head - 290D in good condition. Engine just overhauled. Undercarriage at 50%.


Multitek Firewood ProcessorsIncrease Your Productivity and Profitability

Made in the U.S.A.

2011 Fecon FTX100 w/Mulcher HeadDemo Unit. Great Buy!


www.LBXonline.com

2001 HydroAx 721E w/Rotary Ax Brush CutterExcellent Condition!


www.LBXonline.com

Mid 70’s John Deere 540A Cable Skidder Item ID: 12594Contact: Daren

800.315.9950 Ext. 603

www.LBXonline.com

Hyster 70 XL2 ForkliftItem ID: 12607Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

Cab has heat and air with stereo and all run well. Head recently updated and does great job in hardwood with stroker extension that shoots out at tough limbs. Priced to sell! - Item ID-12206 - Tom 800-315-9950 x6041995 Morbark Wolverine 3 wheeled with Shear head

- 5351 hours, Drive tires are 90%, Machine is ready to Work. - Item ID-12516 - Michelle 800-315-9950 x6031995 Morbark Wolverine 3-Wheeled Feller Buncher - S/N 4073. Only 1000 hours on new JD 4 cylinder engine. Recently replaced turbo. 23.1 tires at 50%. 16” Rapid Buncher shear head.

Machine is fast and in very good condition. - Item ID-12531 - Tom 800-315-9950 x6041995 Timbco 445 with Quadco hotsaw - 1995 Timbco 445, approx. 9000 hours, New track Drive Motor, Cylinders just packed, Cummins engine, u/c 60%, this machine is in the woods daily - Item ID-

12388 - Daren 800-315-9950 x6031995 Valmet 503 w/Koehring 16” Saw Head - Totally rebuilt. New Engine. New Disc. New glass in cab. AC blows cold. Can spin the tires! Owner painted for improved image on jobs. Selling now due to larger timber and needs bigger machine. Must see to appreciate. - Item ID-12545 -


PIPER’SSaw Shop

Promotional Pricing OfferSimonds Red Streak Hard Back

$14.27 eachTell us you saw it here!

Limited

Time

Only$14.71 each

Case 6590T Power UnitItem ID: 12611Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

‘97 John Deere

Grapple SkidderItem ID: 12583Contact: DarenPh: 800-315-9950 x603

www.LBXonline.com

Tom 800-315-9950 x6041996 511EX Hydro-Ax With Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps. Comfort cab with working air. 28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine. - Item ID-12072 - Tom 800-315-9950 x6041996 Hood 20000 Loader w/Delimber & Circle Saw Slasher - Hour meter shows 1650 hours on rebuilt engine. Slasher and delimber run good. 30’ boom. Overall good condition. - Item ID-12433 - Tom 800-315-9950 x6041996 JD770BH Motor Grader - 7720 Hours; s/n

DW770BH557633. 12’ Blade; JD 6076 Engine. Very well maintained. Runs strong. Excellent price. - Item ID-12313 - Tom 800-315-9950 x6041996 Timberjack 610 Forwarder - Good running unit. Needs Brakes. All else works well. About 12000 hours.23.1X26 tires at 40%; 23.1X26 tires 70% Joystick controls; Manual transmission; Cummins Engine - Item ID-12521 - Tom 800-315-9950 x604

1997 Barko 160C Knuckleboom Loader on Trailer - Nice loader. Cummins 6 Cyl engine. 8400 hours. Pitts trailer. Standard lever controls. Rotobec 4642 continuous grapple. - Item ID-12229 - Tom 800-315-9950 x6041997 IH 4000 Truck with Prentice Loader - 6 Cyl. Diesel engine; 26000 GVW. Used as yard machine. Loader runs and lift good. - Item ID-12261 - Tom 800-315-9950 x604

1997 Timbco 455EXL Feller Buncher w/Hot Saw - Decent machine running today. Approx. 12,800 hours. Undercarriage at 50%. Quadco 22” High Speed Disc Saw. Running today. Nice Price. - Item ID-12532 - Tom 800-315-9950 x6041997 Volvo A25C Articulated Dump Truck - Very good machine with 10,000 hours and one owner. $16,000 of recent service and maintenance


To find the nearest dealer call:

(888) 820-3962


Call Marvin Miller for a quote 231-924-5953 (fax) 231-924-6166 11606 Brickyard Rd. Holton, MI 49425

We also offer expert Sharpening Services, plus…

Gang Edger ScraggTrim Split Strob

…and just about any Custom Saws you

need to keep you cutting longer…

for less!

Welded to your lengths!

BANDSAW BLADESWe have the most popular sizes in stock & ready to

ship from major manufacturers, including…

2007 Valmet/Komatsu Model 911 Extreme HarvesterAmazing Machine! New Log Max Head!

Item ID: 12571 Contact: Tom 800.315.9950 x604

www.LBXonline.com

‘04 45’ Battle


www.LBXonline.com

2003 Manitou 523Item ID: 12604Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

by local Volvo Dealer. 6 x 6 all wheel drive capacity. Super Value! - Item ID-12444 - Tom 800-315-9950 x6041998 650g Full Forestry Package - approx. 3000 hours, works excellent 2010 complete under carriage new chains pads and sprockets winch and machine works excellent all pins and bushing all tight replaced main blade bushing replaced all blade cylinders Janurary 2011 Selling because no longer needed for my operation. - Item ID-12488 - Daren 800-315-9950 x6031998 CAT 525 Grapple Skidder - 9600 hours on well maintained machine. 34 x 25” Tires at 50%. Single Arch Esco Grapple and Winch all work well. Center section tight. Cat engine runs well. - Item ID-12429 -

Tom 800-315-9950 x6041998 JD TC54H w/Logging Forks - Very well maintained machine. 13,000 hours. Maintained by John Deere. Machine used for personal only. Never on saw mill. Tires are 28L x 26 at 85%. Runs good. - Item ID-12467 - Tom 800-315-9950 x6041998 Model DM Mack Log Truck - 300 HP Mack Engine; 330,000 miles; 7 Speed Transmission, 46K Rear, 20K Front, Tri -Axle, 22.5 Tires, Like New Log Bed, Truck is in very good condition! Plumbed to take pup trailer. Very well maintained. - Item ID-12493 - Tom 800-315-9950 x6041998 Tigercat 240 Tracked Loader - 9550 Hours. 32’ Reach. Rotobec continuous grapple. Strong Machine. Works well. New Cummins

6BT engine in last 500 hours. Cab riser for high stacking. Clean cab with AC. - Item ID-12242 - Tom 800-315-9950 x6041998 Valmet 603 3-Wheeled Buncher - 6500 hours on total machine but no hours on 4BT3.9 Reman Cummins Engine. Equipped with 18” Waratah High Speed Disc Saw. 28L x 26 Tires at 40% complete with chains. This machine has been extremely well maintained and runs very well. Hard to find them in this good of condition. Has a twin that is available if you need two units. - Item ID-12524 - Tom 800-315-9950 x6041998 Valmet 603 3-Wheeled Buncher - Good running machine with about 6620 hours. Owner maintains his equipment to the highest

degree and it shows. Complete with Waratah High Speed Disc Saw Head. 28L x 26 Tires with chains at 90%. Just installed new Reman Cummins 4BT3.9 Engine. - Item ID-12525 - Tom 800-315-9950 x6041998 Valmet 911.1 Harvester - Single Owner machine. Super Clean and ready to go to work. 10,200 hours. All regular maintenance done consistently. Tires at 75%. Sisu Engine uses less than 4 gal/hr. Slide Boom design easy to learn and operate. - Item ID-12338 - Tom 800-315-9950 x6041999 BELL TF120B Feller Bunchers - one owner machine, it is on D5 cat tracks, Hours not known; meter not working. Price : 60,000.00 USD - Item ID-


1997 Ford Tree


www.LBXonline.com

2005 Valmet 941 HarvesterItem ID: 12569Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

11480 - Daren 800-315-9950 x6031999 Hyundai 280 w/Denharco 3500 Stroker - Good running unit. Priced to sell. Approx 9800 hours. Could use some updates, but great value. - Item ID-12455 - Tom 800-315-9950 x6041999 Mack DM 600 Truck with Prentice 120 - The DM 600 GK has a Mack 235 HP

Engine; 44,000 mack rear ends with a gear ratio of 4:64; Mack 6 speed T20 transmission. Hour meter shows 4000 hours. Runs good. Strong Prentice 120E Loader with 25’ reach and continuous rotation grapple. - Item ID-12448 - Tom 800-315-9950 x6041999 Timbco 820 Forwarder - Good running condition. Tires at 80%. 5000 hours.

Bunks included. Also had Clam Bunk Grapple Option included. Nice package. - Item ID-12454 - Tom 800-315-9950 x6041999 Timberjack 735 Shovel Logger - Ugly but very good machine. Bank Repo. Has sat idle due to court settlement and now can be sold free and clear. 75% undercarriage. Runs well. Low hours. GREAT PRICE! - Item ID-12311 - Tom 800-315-9950 x6042000 Cat 550 Harvester w/Log Max 840 Head - Very nice harvester with 6500 hours on machine, but only 3500 on 1997 Log Max 840 Processing Head. Cat 3126 engine w/180HP. Tires and Chains at 75%. Unit comes with spare squirt boom and many spare parts for processing head. s/n available on request. - Item ID-12349 - Tom 800-315-9950 x6042000 JD 1270 Harvester - 1270C; s/n 01GE0004; Hours unknown...estimated 7500; Cummins 218 HP Engine; Hydrostatic Transmission; Tires and wheels 700MM; John Deere 762C Processing Head; Boom 28’ 2”; Weight = 36,045 lbs.; Ground pressure 6.7 front 6.0 back; Overall Height 11’

11” Length 23’6” Width 9’4”. Very Motivated Seller. FOB: Alaska - Item ID-12477 - Tom 800-315-9950 x6042000 Peterbilt Sleeper Truck - Good running condition. Priced to sell. - Item ID-12492 - Tom 800-315-9950 x6042000 Peterbuilt Logging Truck - 2000 Peterbuilt, N-14Cummins engine, 18spd., 120 Prentice loader, pup trailer. - Item ID-12159 - Michelle 800-315-9950 x6032000 Sterling Road Truck/Tractor - Truck has 259 k miles, a N-14 Cummins 370+ engine, 9 spd. trans. 4:10 rears with 4 air bag tandem axle, 24.5 rubber almost new. Runs Great! Includes wet line kit on truck. FOB: NC - Item ID-12323 - Tom 800-315-9950 x6042001 Precision 23/66 Whole Tree Chipper - One Owner: S/N 3310. Cat 3412E engine with 750HP s/n 4CR01701. New Injectors. Includes air compressor. Oil changed every 250 hours. 10,500 hours and runs like new. 3 axle trailer, California legal, rubber at 85%, and good brakes. Tows smooth. Equipped with Husky 175 loader. Has 3 knife disc with key knife system installed. Makes a super clean chip. Cab has heat and AC working well. Also has


All purpose, durable blade for most sawing applications.

Copyright 2012, Wood-Mizer Products, Inc.

800.522.5760 woodmizerblades.com

All purpose, durable blade

PROF

ILE GROUND TOOTHPPRR

OOFFIILLLLEEEE

GGRROOUUNNDDDD TTOOOOTTHH2008 JD 648H Dual Arch SkidderItem ID: 12613Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

stereo radio and CB. New glass in loader. External chute controls. Super Clean! - Item ID-12526 - Tom 800-315-9950 x6042001 Quadco 22B Hot Saw with Low Mounted Arms - High Torque Single Pinion Wrist; All Cylinders Rebuilt; Saw Disc Re-Centered to 1 3/8” thick, $3500.00 Value; New Beaver teeth; Saw Motor Rebuilt, new shaft and Adapter Spline; Drive shaft bearing surfaces re-chromed to new spec, New Bearings & Seals; All Cracks Repaired; New Paint. - Item ID-12471 - Tom 800-315-9950 x6042001 Timbco 445D w/Quadco 2800 Saw - Only 4050 hours on this gem! Extremely well maintained. Very Good Condition. Undercarriage at 80%. 360 rotation on head. New 12 tooth disc on saw. Ready to work. - Item ID-12486 - Tom 800-315-9950 x6042001 Timberjack/Deere 840 FB - Total hours = 8700. 75 hours on Rebuilt Engine. Machine is tight and dry. New Oil Cooler. Joy Stick Steering. 34” Tires at 70%. JD 22” Saw Head is tight and runs well. Very clean unit and a great price. - Item ID-12410 - Tom 800-

315-9950 x6042002 Daewoo 290LL Log Loader - Located in MI. Daewoo 290LL, Pierce Pacific Log Loader Package, Elevated Cab, High Walker, Forestry Protected Cab and all logging guarded, Pierce Boom, Dry Chemical Fire Suppression System, Good Undercarriage, Butt n Top grapple. 2002 Year model, 19000 hours, but well maintained, updated, and upgraded. Runs very well. Man engine package lasts 40,000 hours. FOB: MI - Item ID-12480 - Tom 800-315-9950 x6042002 Franklin 185 Cable Skidder - Very clean machine with about 7800 hours. Cummins Power. One owner. Well maintained. Tires at 80%. - Item ID-12451 - Tom 800-315-9950 x6042002 John Deere 648GIII Dual Function Grapple Skidder - 9700 total hours, 3000 on Reman. engine, Reman. transmission 6000 hrs. 30.5x32 tires at 60%. MAchine is working daily. - Item ID-12231 - Daren 800-315-9950 x6032002 New Holland TV140 w/10’ Brush Cutter - Only 3000 hours. Very well maintained. Brush Cutter

has less than 500 hours. Complete with winch and forestry package. Tires at 80%. Comfort cab with great visibility. Extremely productive and stingy on fuel. - Item ID-12414 - Tom 800-315-9950 x6042002 Timbco 445D w/22” Quadco Hot Saw - Only 2400 hours on Upper which was replaced after burning at 2000 hours. Total hours on lower undercarriage is 4400 and has been rebuilt. 70% life left on lower. Customer has rebuilt the engine with a new cylinder head, pistons, rings,bearings,gaskets, and fuel transfer pump with only 700 hrs. on rebuild.. Unit has a new saw disc on the 22” Quadco Hot saw with 360 degree wrist... Main boom to stick boom pin and bushings have been replaced in a the last 3 months and saw pump

was installed about a year ago. THIS IS ONE OF THE CLEANEST 2002 MODELS YOU WILL FIND AT THIS PRICE! - Item ID-12541 - Tom 800-315-9950 x6042002 Timberjack 608s with hot saw - approx. 6000 hours, Machine is in very good shape and has been well maintained. - Item ID-12194 - Daren 800-315-9950 x6032002 Vermeer Horizonal Grinder Model HG365 - Cummins Engine, 365 HP, 20” capacity, New belt, New teeth, New floor plates - Item ID-12372 - Daren 800-315-9950 x6032003 CAT 330 Log Loader - 13,750 hrs. new u/c less rolls nice tight and clean log loader. Located near Portland OR; 38’ Live Heel boom; Forestry package on cab. 40” cab riser with tilt for transport. AC/Heat work good. Very nice yard

1999 Timbco 820 ForwarderRuns well!!


www.LBXonline.com


VFD

OF MOTORS

(Solid State)

Reconditioned Electrical Equipment

Saves You Money, Big Money!

We Buy, Sell, or Rent— Used, Obsolete and Hard to Find Industrial Electrical Equipment

Many ItemsIn Stock Ready for

Immediate Shipment!

When you need it NOW—And at the BEST Price!

YOU NEED WEAVER ELECTRIC

CALL TODAY!Toll Free 800-257-0038

Web: www.weaverelec.com

2000 Waratah 622 Proc. HeadTotally Updated!


www.LBXonline.com

machine. - Item ID-12478 - Tom 800-315-9950 x6042003 Cat 950 Loader w/ Log Forks - 1500 hours on new engine. Very good condition. Total hours 7350. Priced to sell. - Item

ID-12544 - Tom 800-315-9950 x6042003 Franklin 185 Cable Skidder - 7600 Hours; Very good condition; Cummins Power; Enclosed Cab with working heat and air; Tires at 80%. S/N18562 - Item ID-12447 - Tom 800-315-9950 x6042003 Franklin Q70 Grapple

Skidder - Model Q70-M31A,Enclosed Cab W/Heat & A/C,28Lx26 Tires 85% Rear,70% Front, 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Winch and Grapple. Excellent one owner machine! - Item ID-12337 - Tom 800-315-9950 x6042003 Franklin Q80 Grapple Skidder - 7500 hours, but just 5000 hours on reman engine. New Radiator; New

Hydraulic Pump; Comfort cab with good working heat and air; Tires at 80%. - Item ID-12450 - Tom 800-315-9950 x6042003 TimberPro Model TS 620 Six-Wheeled Grapple Skidder - 4990 hours, Cummins motor, 6WD. Has 400 hours on rebuilt engine, New ECM; New drive pump; New tires. Excellent condition; Great Value. Perfect for long hauls or handling big loads. Rear bogey tracks included.

Bandit Industries Announces NEW DEALERS IN OKLAHOMA, SOUTHERN CALIFORNIABandit Industries is proud to announce the addition of two new dealers to the company’s North American dealer network. These new locations will provide sales and service for Bandit hand-fed chippers and stump grinders, while also serving most chipper owners by stocking Zenith knives for a variety of machines.

Bandit Tree Care Products of Southern California is based in Foothill Ranch, California. This brand-new dealership is conveniently located between Los Angeles and San Diego, serving customers in both metro areas as well as the entire Southern California region. Bandit Tree Care Products of Southern California is stocked with Bandit equipment and Zenith knives for almost every chipper make and model, and the staff is ready to deliver the legendary customer service for which Bandit is known. Visit Bandit Tree Care Products of Southern California at 70 Auto Center Drive in Foothill Ranch, call them at 760-828-7343, or check them out online at http://www.banditofsocal.com.

Miner’s Equipment and Truck Repair is centrally located in Oklahoma City to serve customers throughout Oklahoma in a quick, efficient manner. The staff is highly experienced in equipment maintenance and repair, servicing a wide range of machinery but specializing in arborist equipment. Miner’s Equipment and Truck Repair will also sell new Bandit chippers and stump grinders as well as Zenith knives. The company is located at 9640 NW 6th Street in Oklahoma City; they can be reached by telephone at 405-234-6460 or online at http://www.minersrepair.com.

Bandit Industries Inc. is a leading manufacturer of equipment for the logging, tree care, biomass, land clearing, and wood waste recycling industries. Bandit offers a complete line of hand-fed wood chippers, stump grinders, whole tree chip-pers, forestry mowers and horizontal grinders, all manufac-tured at the company headquarters in Remus, Michigan.

‘94 Husky 235XL Loader

Runs Good! Priced Right!


www.LBXonline.com

Now, Three Ways to Make

Your Day More Profitable

WOODBINE FIREWOOD PROCESSORS

PERFORMANCE POWER PROFIT

50' slasher saw with 8-way wedge.Take on huge yields with a reasonable pricepoint.

$54,900

Smaller, but just as powerful.4 Cords/hr. up to 16" diameter wood.

$46,900

1

3

Let us show you the Woodbine way........$67,900

MADE IN USA


FAX TO: 800-248-4479 419-244-8887 419-248-4479

[email protected]

2008 Timbco/Valmet 445FXLLow Price!!

Item ID: 12614Contact: Tom

Ph: 800-315-9950 x604

www.LBXonline.com

2009 Peterbuilt Clean-up Truck w/ a 2009 Extenda Boom

Loader


www.LBXonline.com

1999 CAT 525B Grapple SkidderItem ID: 12618Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

1989 CAT 518G Grapple SkidderItem ID: 12621Contact: Michelle

800.315.9950 Ext. 606

www.LBXonline.com

- Item ID-12254 - Tom 800-315-9950 x6042004 72” CSI R72 Circle Saw - Year model 2004, hydraulic. 20’ deck. Sold without the blade. New blade is additional $3500.00. Was over $40,000.00 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs Price : 17,000.00 USD - Item ID-12125 - Michelle 800-315-9950 x6032004 Barko 375A Loader on Rough Terrain Carrier - Mounted on rough terrain carrier. 40’ boom, hydraulic tilt cab, engine covers are hyd raised & lowered. 7209 hours. Rotobec continuous grapple. Very nice machine.

- Item ID-12380 - Tom 800-315-9950 x6042004 Barko 395 on SP Carrier - Very Clean Machine. 8800 hours. Mounted on Big John Self Propelled Carrier. JD 6.9 Powertech Engine. Rotobec 4547 Grapple. 35’ Reach with heel bar. Comfort Cab with Heat/AC/Stereo. Nice yard machine. - Item ID-12278 - Tom 800-315-9950 x6042004 CAT 525B Grapple Skidder PRICED TO SELL FAST!!!! - 8,538 hours, Caterpillar 3126 Engine, Powershift transmission, 30.5L-32 Tires (3 Poor, 1 Like New), More photos available, Machine is in

southeast - Item ID-12424 - Daren 800-315-9950 x6032004 Hood 28000 Loader with hotsaw - 72” hot saw; has 8000 hours. - Item ID-11418 - Michelle 800-315-9950 x6032004 Hydro-Ax 570 Feller Buncher - 9405 Hours. S/N HA18599. Cummins 205HP Engine. Hydrostatic drive. Hydro-Ax bunching saw head with side cut feature. New 30.5 x 32 tires. New engine 2500 hours ago. New Gear Box 2500 hours ago. New saw disc. Runs well. Ready to go. - Item ID-12316 - Tom 800-315-9950 x6042004 JD 843H Feller Buncher w/JD 22” Hot Saw - Very clean machine.

Model 843H; Year 2004; S/N WC843HX882337; Condition Good; Hours 3,267; Engine JD 6.8 liter; Tires 28L-26 14 ply 50%; Chains on front tires; Enclosed cab with heat and air; JD Hot saw head 22”; All functions work. No leaks. ONE OWNER. WELL MAINTAINED. - Item ID-12466 - Tom 800-315-9950 x6042004 Prentice 384 TMS Loader Package - 11,145 Hours; CTR 450 Delimber; Recon John Deere engine with less than 200 hours. Runs good. Working on job today. Good condition. TN - Item ID-12171 - Tom 800-


‘01 Precision 23/66 Whole Tree ChipperItem ID: 12526Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2002 Timbco 445D w/22" Quadco Hot Saw - Low Price; Low Hours!Item ID: 12541 Contact: Tom 800.315.9950 x604

www.LBXonline.com

2004 Hood 28000 Loader w/HotsawItem ID: 11418Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

315-9950 x6042004 Tigercat 724D Feller Buncher - Only 2800 CONFIRMED hours. One owner who is a construction contractor that only used this machine on occasion. New engine installed in 2010. Tigercat 22” Hot Saw. Shows 44” tires, but will be equipped with 30.5 x 32 tires at 75%. - Item ID-12496 - Tom 800-315-9950 x6042004 Timberking TK560 Loader with CTR450 Delimber - 7200 hours, new knives in delimber, very tight and dry machine. WOODS READY!! - Item ID-12483 - Daren 800-315-9950 x6032005 Hydro Ax 670 with 22in Saw head - 7200hours,

22inch high capacity bunching head, New Cummins engine, 1 new firestone tire other 3 at 40%, Tires are 30.5 - Item ID-12481 - Daren 800-315-9950 x6032005 Prentice 280 TMS - Good running machine. Hour meter shows less than 5000 hours but owner believes it to have about 7800. Machine serial number is PR59771. Unit has Cummins engine and runs good with no blow-by and has no leaks and is tight Dependable machine that is priced right with the market. - Item ID-12527 - Tom 800-315-9950 x6042005 Prentice 384 with Saw Hookups - 10123 Hours, 2nd owner, This machine is in

very good condition and is ready to work!!! - Item ID-12396 - Daren 800-315-9950 x6032005 Takeuchi Supertrack Skid Steer with B74 Fecon Head - 981 Hours. 102 HP Engine. New Tracks. Fecon B74 Mulching head with new teeth. Winch. Comes with spare 80” bucket. Half the price of new. - Item ID-12413 - Tom 800-315-9950 x6042005 Valmet 860.1 8-Wheeled Forwarder - 11,800 hours. New hydraulic transmission and gear box. Spare pump ($7,000 value) Good running condition. Sisu engine uses 4 gal/hour. 16 ton capacity. Tracks for front and back. Front blade.

Hood guard. - Item ID-12267 - Tom 800-315-9950 x6042005 Valmet/Timbco 415 Harvester with 370E Head - Very nice unit. 7400 hours. 370E Harvesting head just added 22 months ago and only has 2000 hours. 36” Triple Grouser tracks at 60%. Sisu engine that is very stingy on fuel. 8’ squirt at end of boom for 30’ reach. Reversible fan and auxiliary oil cooler. - Item ID-12266 - Tom 800-315-9950 x6042005 Volvo L90E Wheel Loader w Forks & Bkt - 7561 Hours on this very nice woodyard loader. Volvo 119HP engine is stingy on gas. Includes 106” bucket for loading chips or waste. 20.5R25 tires at 80%. Comfortable cab with AC & Heat. Ready to load today. - Item ID-12404 - Tom 800-315-9950 x6042005 Waratah 622 Proc. Head with Top Saw - Good condition and well maintained. Needs minor maintenance and new monitor, but priced to allow for that. Complete with computer and some spare parts. Chain size is .404 top and 3/4 bottom. No drive motors have been replaced.


Sell Your WOOD – $300/cord or More!Double or triple your profits by shrink wrapping wastewood - fore-wood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for produc-ing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee.

B & B Manufacturing

SHRINK WRAP FIREWOOD/WASTEWOOD

1980 (est) JD 640C RECON

Grapple SkidderRebuilt! Unique!


www.LBXonline.com

1988 Morbark 27RXL Whole Tree ChipperItem ID: 12519Contact: Michelle800.315.9950 Ext. 606

www.LBXonline.com

All working well. One cylinder leaking slightly. He is original owner. Machine received Waratah updates by Waratah about 2 years ago. New knives. There is a pilot filter but not an inline filter - Item ID-12420 - Tom 800-315-9950 x6042006 Barko 595 CRL Loader - 40’ Live Heel for high stacking. 8555 well maintained hours. JD 6068T engine. Rotobec 4048HD Grapple. Undercarriage at 60%. Hyd tilt cab. Work ready! Good condition. - Item ID-12405 - Tom 800-315-9950 x6042006 Cat M318 MH - Totally refurbished with 30 day warranty. Gone

through from end to end by professional rebuild factory. Hydraulic elevated cab for great visibility. 38’ reach. Logging grapple included. Fantastic Yard Machine. FOB: Baltimore - Item ID-12520 - Tom 800-315-9950 x6042006 GT25 Gyro Trac - Refurbished undercarriage at 80% with new tracks and new set of cutter teeth, this machine is work-ready. 773 hours on Cummins 230HP diesel, overall good condition. Pressurized cab, winch, ROPS. - Item ID-12268 - Tom 800-315-9950 x6042006 Hydro Ax 321 FB w/Koehring 16” Saw - Good running unit with less than 6000 hours. 23.1 tires at 40%. Koehring 16” Saw Head runs good. JD Engine. Chains for 23” Tires. Hard

to find units like this. Great value. - Item ID-12551 - Tom 800-315-9950 x6042006 JD 310 Loader/Backhoe - 1762 Hours. Very nice condition. Extenda-Hoe. 4 wheel drive. Runs good. - Item ID-12464 - Tom 800-315-9950 x6042006 JD 540GIII Cable Skidder - Only 1800 hours. Bought with 575 hours in 2009 and used sparingly in hardwood application. 23.1 Tirees at 80%. AM/FM Radio with Heater in cab. Removable glass for summer. Great condition. - Item ID-12411 - Tom 800-315-9950 x6042006 JD 748GIII Dual Arch Skidder - Approx 8400 hours; Very well maintained; 30.5 tires at 40%; Sweda axles; Winch. Unit working everyday. - Item ID-12117 - Tom 800-

315-9950 x6042006 John Deere 748GIII Dual Arch Skidder - 8900 hours. Good condition. Working today. One owner machine. Tight and dry. 32.5 tires at 50%. - Item ID-12542 - Tom 800-315-9950 x6042006 Lamtrac LTR7230 with New FAE 175 mulching head - Only 522 demo hours, this machine still carries a warranty from the MFG. Equipped with Cummins C8.3 - 230HP. FAE Head is Brand New and has ZERO hours! It replaces the head in the photo. Weight is 26,000 lbs giving it a very light 4.42PSI ground pressure. Superior traction and stability through Lamtrac’s unique quad track/double articulated platform. Priced well below dealer cost.


SKIDDER TIRES

TRUCK TIRES

(800) 537-2042

ASK ABOUT FREE DELIVERY

1997 Prentice

Includes Delimber &

Slasher!


www.LBXonline.com

1996 Bell Ultra “T” on Tracks30” Dangle Head


www.LBXonline.com

1988 Jackson

Very good condition!!


www.LBXonline.com

2008 Mack CHU 633w/Lowboy TrailerItem ID: 12535Contact: Tom

800.315.9950 Ext. 604

www.LBXonline.com

This is a bargain from the manufacturer that won’t be seen again. See more at www.lamtrac.com. - Item ID-12353 - Tom 800-315-9950 x6042006 Log Lift 115Z Foldable Self Loader - Never mounted. This loader is the highest quality on the market. Includes Stainless Steel Cab that hydraulically raises 5 feet; Two Section knuckle boom with squirt extension for total of 32’...Longest Reach in it’s class. Lift capacity of 2000 lbs at full reach. Unique foldable ‘Z’ design allows loader to fold up and store totally behind the cab or between trailer and pup without resting boom in front of truck or on load. Out & Down outriggers give maximum stability. Log Lift Loader also weighs 20% less than other loaders in

it’s class. Piston pumps give smooth fast cycle times. Cab is heated and has joystick controls. A/C can be added. This is the best you can buy in a self loader. - Item ID-12356 - Tom 800-315-9950 x6042006 Peerless Open Top Chip Trailer - One (1) Peerless Straight Floor - Open Top - Chip Trailer 2006 Year Model - Serial#: 1PLE045206 PJ54716 Model 45 CST - Top Henge Rear Gate 11R 24.5 Tires - Steel Disc Wheels - Good Floor Spring Suspension - Reyco 50% Tires - New Brakes - Item ID-12342 - Tom 800-315-9950 x6042006 Talbert 25T Trailer - Model 25XPL Tri-Axle. 25 ton capacity with 25’ Floor with 6’ Dove. ABS. Tires at 70%. Very Good Condition. - Item ID-12416 - Tom 800-315-9950 x604

2006 Tigercat 726E Feller Buncher - Unit has 6900 hours but new meter was recently installed at 6180 hours and only shows 716 hours. Owner has documentation to show true hours of 6900. Has 34” tires at 65%. Equipped with Tigercat 5702 felling head. Machine in very good condition and is ready to work. Unit is tight and dry with plenty of power. - Item ID-12529 - Tom 800-315-9950 x6042006 Valmet 603 w/Hot Saw - 5600 hours on very nice machine. Cummins 4BT3.9 engine runs well. 28L x 26 tires at 45%. New Saw Motor. AC and Stereo both working. Uses about

4.5 gal/hour. Great thinning machine. Low cost to operate. These types of machines are hard to find! - Item ID-12539 - Tom 800-315-9950 x6042007 Case 1150K Dozer - 2565 Hours on very strong dozer. Case 130HP engine. Open ROPS cab. 24” pads; Rock Guards; Canopy Brush Guard; Hydraulic PTO; Runs strong and priced to sell. - Item ID-12348 - Tom 800-315-9950 x6042007 Cat 325D w 624 Waratah Processing Head - 7800 hours. Very clean machine. Head updated.


2011 Morbark 40x36 Drum ChipperItem ID: 12540Contact: Tom

Ph: 800-315-9950 x604

www.LBXonline.com

2003 Meadows #3 Mill Item ID: 12580Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

Hydro Ax 670 Feller Buncher w/Saw Head

Item ID: 12566Contact: Daren

800.315.9950 Ext. 603

www.LBXonline.com

‘06 CAT M318 MH Totally Rebuilt!

Great Yard Machine!


www.LBXonline.com

Unit is working today. 34” Triple Grouser Pads. Great landing machine. - Item ID-12283 - Tom 800-315-9950 x6042007 John Deere 335C Loader - 2000 hrs, comes with a NEW CTR Reversable Bucksaw. - Item ID-12234 - Daren 800-315-9950 x6032007 Kenworth W900B Log Truck w/Loader - Only 129,000 miles. Great condition. C-15 Cat engine with 18 speed transmission. New Tires. 24’ bed. Chalmers Axles, 20K Front; 46K Rear. Hubler Brothers Loader installation of Prentice 2124 includes headache rack oil cooler. 2011 Pitts Pup Trailer adds $10,000. - Item ID-12412 - Tom 800-315-9950 x6042007 Liebherr A924B

Wheeled Log Loader - 10,100 hours. Very Good Condition. Liebherr makes the highest quality heavy equipment in the world. This unit can go another 20,000 hours. 44’ reach with over 7000 lb capacity at 40’. Hydraulic raising cab for 16’ 8” operator eye level. Front blade for pushing or cleaning road debris. Grapple NOT included. Travels up to 12.5 mph with variable speed hydraulic transmission. Super smooth hydraulics make this a great wood yard machine. - Item ID-12503 - Tom 800-315-9950 x6042007 Rayco C-87-L Crawler Mulcher - Only 2500 hours. Very Good Condition. Runs well. Deutz 87 HP engine - Oil Cooled. Steel Tracks w/

14” Pads. 6 track rollers. 1 carrier roller. Enclosed ROPS Cab with working Heat and Air. Attachment is Gyro Tract Model Toma Axe GT500 Planer Knife Cutter. Works Great! S/N 794429. - Item ID-12548 - Tom 800-315-9950 x6042007 Tigercat 234 Loader w/Slasher - Very clean unit with just 4600 hours. Powerful with Cummins 173HP engine. 32’ Reach. Tigercat continuous rotation grapple. CSI DL4400R reversible sawbuck. Mounted on Pitts trailer. Comfort cab with AC/Heat/Stereo and Satellite Ready. Less than half the price of new and in excellent condition. - Item ID-12347 - Tom 800-315-9950 x6042007 Tigercat 250 w/2011 Log Max 7000XT - 7500 hours on Tigercat. 700 hours on new 2011 Log

Max 7000XT head. New pump for head. 36” Triple Grouser pads on 60% undercarriage. Cummins 6 cyl engine. Smooth and powerful machine. Log Max head can do multi-stem delimbing (see photos). Owner closing down job. Below market price. - Item ID-12366 - Tom 800-315-9950 x6042007 Tigercat 630C Skidder - Very clean unit. S/N on request. Tires at 60%. 6519 hours. Big capacity grapple. Tight and ready to work. One owner machine. - Item ID-12275 - Tom 800-315-9950 x6042008 Lamtrac Model 8290 Quad with FAE 300-U Head - Only 1200 Hours on this amazing land clearing machine. Super light foot print allows this machine to go where no other can and climb where no other machine dares! Cummings


AJD Forest ProductsPremium Kiln Dried Hardwoods

Northern Red Oak is Our SpecialtyLake States Largest Producer of Industrial Lumber

Grapple SkidderItem ID: 12558Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

1992 JD 643 Shear Feller BuncherPrice Reduced!!

Item ID: 12537Contact: Tom

Ph: 800-315-9950 x604

www.LBXonline.com

2010 Prentice

Post Saw HeadClean and Runs Well!


www.LBXonline.com

‘05 Western Star w/’09 Lemco 75XLT LoaderItem ID: 12598Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

290 HP provides maximum power to the head for best performance in its’ class. Very low ground pressure of 3.97 PSI. Weighs 36,000 lbs. Operator comfort is second to none. Safe and easy to maintain. This unit is priced well below wholesale. See www.lamtrac.com for videos and specifications. - Item ID-12354 - Tom 800-315-9950 x6042008 Mack CHU 633 w/Low Boy Trailer - 2008 Mack CHU 633 has 150k miles on it. Vin is 1M1AN07Y98N001230. Also has a 2010 Kaufman trailer FR50DT in excellent condition. Fantastic value. - Item ID-12535 - Tom 800-315-9950 x6042008 Morbark 3800 Wood Hog - Just refurbished at

factory. Customer has invested $Thousands in upgrades to make ready for sale. Super Clean machine! Only 3064 hours. Very well maintained. S/N 189-1033. JD 600 HP Tier 3 Engine. Remote control. Mag End Pulley. Hydraulic Fan. Break away mounts. PT Tec Wet Clutch. 3” Hex Screens. - Item ID-12277 - Tom 800-315-9950 x6042008 NEW Lamtrac Model 8290Q Mulcher/Right of Way Clearing Machine - New 2008 w/15 demo hours and FULL FACTORY WARRANTY. Cummins QSC 8.3 Tier III - 290HP; Rexroth Hydraulics; Berco undercarriage; Weight - 36,000 lbs (with head); 3.7psi ground pressure ROPS/FOPS/OPS certified cab with premium comfort

package. Its ingenious four track, double articulated design enhances maneuverability while maximizing traction. Goes ANYWHERE! Best in class! TX - Item ID-12146 - Tom 800-315-9950 x6042008 Prentice 2432 Dual Arch Skidder - Very good condition. 2800 Hours. 30.5 x 32 Tires at 60%. Working today. Machine is tight and dry. No blow by in Cummins engine. Dual Arch Grapple. Comfort Cab with AC/Heat/Stereo. - Item ID-12536 - Tom 800-315-9950 x6042008 Valmet 890.3 20 Ton Forwarder - 7200 Hours. Good Condition. 8-wheeled with Eco Tracks for all bogeys. Best Price on Market! New Hydrostatic Transmission just installed

with full factory warranty. Customer ready to sell. Tires at 50%. Sisu Engine uses about 4 GPH! Front Blade. Hood Guard. One owner machine who took great care. - Item ID-12263 - Tom 800-315-9950 x604CBI Grinder Model Magnum Force 6400T. Weight: 80,750 lbs. Cat C27 engine w/1050 HP. 1850 hours; 1 1/2” x 2” screen. 95% U/C. Customer has the feeder belt. Very good condition! - Item ID-12422 - Tom 800-315-9950 x6042009 JD 437C Loader with Delimber - Super Clean unit with only 3119 hours. Complete with CSI 264 Delimber. Comfort Cab with AC/Heat/Stereo. Joystick controls. JD 180HP engine. Kodiak Trailer. Very clean and runs well. - Item ID-


SAWMILL EXCHANGENorth America's Largest Source

of Used Portable Sawmills.

Over 800 Ads:

and Much More!!

The Place to Sell Your Equipment

800-459-2148 www.sawmillexchange.com

3-Strand Green Chain 36’x8’ w/ StopsItem ID: 12596Contact: Daren

800.315.9950 Ext. 603

www.LBXonline.com

2008 Prentice 2432 Dual Arch SkidderItem ID: 12536Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

12523 - Tom 800-315-9950 x6042009 John Deere 843J Feller Buncher - 1800 hours. Very clean machine in excellent condition. Customer lost job. 30.5 x 32 Tires at 90%. JD Hot Saw. Comfort Cab with Head/Air/Stereo. - Item ID-12490 - Tom 800-315-9950 x6042009 Risley Eclipse R300 Mulcher - Well maintained machine with only 585 hours. Owner downsizing operation. All components in excellent condition. Tracks at 90%. Risley Mulching Head cuts 102” wide. Weighs 30,400 lbs without head. POWER: Cummins™ QSL 9 litre Tier 3, 300hp @ 2100 rpm (BULGE 325HP @1900RPM)

24 volt 2-12 volt batteries

FlexXairE™ Fan system (auto/man-reversing, VARIABLE PIT CH) POWER

ion – Dual-path closed loop hydrostatic (Sauer-

Drive – Lohman GFT -40

Hydraulic filtration – Full

Press ure/full flow filtration

Interlocking 28” wide, single grouser (STEEL )

Rubber bush ing supported with high strength pins - Item ID-12534 - Tom 800-315-9950 x6042009 Tigercat 720E Feller Buncher - 5239 Hours on this well maintained machine. Equipped with Tigercat 5603 bunching head with new carbide teeth. 24.5 x 32 tires at 75%. Cummins engine runs strong with no blow by. Machine is tight and dry. Ready to work today - Item ID-12530 - Tom 800-315-9950 x6042010 Bandit 2400 Tracked Disc Chipper - 1433 Hours. 700HP. Very clean unit to make paper quality chips. Tracks allow this chipper to work right of ways or pipelines. Excellent condition. Super value. - Item ID-12501 - Tom 800-315-9950 x6042010 JD 648H Grapple Skidders - LOW HRs. - 2300 hours. Owner lost his job. 30.5 x 32 tires at 95%. Dual Arch Grapple. Save $80,000 off new. Super Clean! - Item ID-12473 - Tom 800-315-9950 x6042010 JD 748H Grapple Skidder - Like New

Condition. 2100 hours. 30.5 x 32 Tires at 80%. Loaded. Customer lost contract. Save big over new machine purchase. - Item ID-12282 - Tom 800-315-9950 x6042010 Prentice 2670 w/Bunching Head - ONLY 1504 Hours. Excellent Condition. 34” Tires at 80%. One Owner. You will not find units like this on the market very often! - Item ID-12452 - Tom 800-315-9950 x6042010 Prentice 2670 w/Single Post Saw Head. - Only 3199 hours. Cummins engine. 30.5 x 32 tires at 40%. Single post saw head. Great Value! - Item ID-12552 - Tom 800-315-9950 x6042010 Valmet 860.4 Forwarder - Incredible opportunity if you are looking for a new forwarder! Only 722 hours. MFG warranty still applies.

This machine is LOADED including the WEBASTO programmable pre-heater! Includes 2 sets of Eco Tracks; Blade, and Hood Guard. Owner changing jobs and no longer needs this machine. Save $50,000 off of new machine! - Item ID-12351 - Tom 800-315-9950 x6042011 JD Model 748H Dual Arch Skidder - 30.5 x 32 Tires. 600 Hours. Job shut down after buying skidder new in Jan. Save 10% off new and pay no sales tax! - Item ID-12262 - Tom 800-315-9950 x6042011 Morbark 5500 Flail Debarker/Delimber - Cat C15 engine w/600HP. Only 912 hours. 3 Flail design. Gross weight 68,060 lbs. Like new! Excellent condtion - Item ID-12423 - Tom 800-315-9950 x6042011 ‘NEW’ GN Roy Model


”Jackson has been around long enough so they’ve figured out

what works and what doesn’t.”

“Jackson Wood Shaving Mills

rugged and dependable.”

“In volume tests on production, the Jackson Wood Shaving Mill

was tops—and in day-in, day-out production, it’s still tops!”

“Our Jackson Shaving Mill was built in 1966 and is still going strong!”

“As our business has expanded, we’ve come back to Jackson for Shaving Mills again and again.”

“We like the low maintenance and availability of manufactured parts for our Jackson equipment.”

WHAT OUR CUSTOMERS ARE SAYING—

Questions about Shaving Mills

has 50 years of answers!plus

Several Models to choose from producing 7.4 Cubic Yards (5.7 Cubic Meters) to 50 Cubic Yards (38.2 Cubic Meters)

Utilize low-grade Logs & Slabs Produce high-quality, fluffy shavings

Complete wood shavings plant layout services available

Shavings Drying Systems

Wood Shaving Mill

— Shaving Mills Webb Solid-fuel Burners “Premier” Scragg Mills Stationary Sawmill Carriages Hydraulic, Electric and Electronic Setworks Vertical Edgers, Horizontal Edgers “Lumber Harvester” Portable Sawmills

SL H

L

M H S Phone: (715) 926-3816Fax: (715) 926-4545

830 N. State Road 37, Mondovi, Wisconsin 54755 USA

WE HAVEDRYERS

AVAILABLE SINGLE OR TWIN-BOX MACHINE?WE OFFER BOTH.

PHONE US FOR DETAILS.


Carriage Linear & Set ShaftLewis Controls “Electronics for sawmills by sawmillers”

The Most Complete Line of Sawmill Machinery Since 1905!

More Production & Profit is Only One Call AwayFor Parts, Service & Sales

Call (423) 698-0284

Several Timberjack Rear Ends

460, and 380

Item ID: 12603Contact: Daren

800.315.9950 Ext. 603

www.LBXonline.com

(2) ‘98 Valmet 603 3-Wheeled Buncher

Condition!


www.LBXonline.com2252C Hot Saw - Brand new 22” capacity hot saw. Never mounted. 360 rotation, planetary drive in the wrist. Bent axial motor to run the planetary. They also us a 63 series Rexroth motor to turn the saw, same as Quadco, Koehring/JD, Cat etc. Includes new boom adapter & pins to match the machine. Save $25,000 off new price. - Item ID-12472 - Tom 800-315-9950 x6042011 Pitts Pup Trailer - Excellent condition. Tires at 80% Stakes straight. Photos say it all. - Item ID-12415 - Tom 800-315-9950 x6042011 Reconditioned KMC Tracked Grapple Skidder - Model #42 KMC Model 2500P (Dual Arch Grapple) Track Skidder. Cummins 6BTA (174 HP). - Clark 28000 Series Powershift Transmission. John Deere Model 40 Winch (40,000 lb line pull). Hydraulic operated controlled Steering Differential. Planetary Final Drives. - ESCO Dual Arch Grapple. - Fully enclosed Hi-Vis Cab c/w Heater, Air Conditioning, Lights, Swivel Suspension seat c/w

Joystick Controls. - Pilot operated closed center Hydraulics. Sundstrand Sauer 45 Series Pump: - DanFoss Model L90LS 5 spool control valve - New. KMC Wear Resistant Tracks & Sprockets . Torsion Bar suspension. Heavy Duty Cast Steel KMC Road/Idler Wheels. Standard Decking Blade. FOB: BC, Canada INCLUDES ONE YEAR LIMITED WARRANTY!! - Item ID-12549 - Tom 800-315-9950 x60440’ Finch tri-axle Log Trailer - 18 bunks, tires are road ready, everything works on the trailer. - Item ID-12505 - Daren 800-315-9950 x60345’ Tri-axle Log Trailer with Prentice 120 loader - 9 bunks, brakes and tires are road ready. - Item ID-12506 - Daren 800-315-9950 x603Cat 518 Grapple/winch Skidder - Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber. 130-hp, all pins are good. - Item ID-12202 - Daren 800-315-9950 x603Caterpillar 225LC Shear Excavator - 4226 hours, Undecarriage is in GOOD Condition, Machine is

WOODS ready. - Item ID-12517 - Michelle 800-315-9950 x603Caterpillar Dozer Model D4E with winch - 3304 caterpillar engine, power shift, 50,000 lb winch - Item ID-12369 - Daren 800-315-9950 x603Caterpillar Excavator Model 235 - 1239 hours, 3306 Caterpillar engine, hydraulic thumb - Item ID-12371 - Daren 800-315-9950 x603Clark 664D Cable Skidder - 5 cylinder 88hp deutz engine, newly rebuilt transmission, new head gaskets, new injectors, new mainline. - Item ID-12221 - Daren 800-315-9950 x603Euclid Dump Truck Model R-13 - Hours 3960, Engine Detroit Diesel - Item ID-12373 - Daren 800-315-9950 x603Franklin Skidder - 2003,Model Q70-M31A,

Enclosed Cab W/Heat & A/C,28Lx26 Tires 85% Rear,70% Front, 100 Hours On Dealer Rebuilt Transmission, 600 Hours On Cummins Recon Engine 6BTA 200 H.P. Excellent one owner machine! - Item ID-12152 - Chris 800-315-9950 x600Franklin Skidder Model 142 - Hours 7230, Good strong machine, 453 Detroit Power unit - Item ID-12376 - Daren 800-315-9950 x603Franklin Skidder Model 170PT - New tires, New cable ,Hours 6585 - Item ID-12377 - Daren 800-315-9950 x603Haybuster IG-10 Tub Grinder - This 8-ft. tub is powered by a 275 hp CAT engine. This portable tub grinder has 48 swinging hammers and a set of 1” screens. Unit also has new clutch and belts, and the hammers are in good


LOGGING & SAWMILL LIQUIDATION SALE

For Questions or to Schedule an InspectionCall Daren x603 or Michelle x606

(800) 315-9950

Over a million $$ in inventory available. Also available are:

Several Timberjack

models

with Serco loader

Loader

loader

chain with stops, storm

Trailer

1990 D&D pup trailer

chain with drive included

conveyor

Phelps Dust blower

And Much More!!

2005 Kenworth T-800 Rotobec MT27

Case 6590 T Power Unit 1997 Ford Tree Trimming Truck

Hyster Forklift 2003 Manitou 523 Case W20C

1989 Intl. Clean-Up Truck 1997 Ford L9000 Log Truck John Deere 540 Cable Skidder

40" Cleerman Mill Meadows Edger Meadows #3 Sawmill

1987 Cleerman Mill 1997 John Deere 648G 45' Log Trailer


Made in the USA

Nothing Eats Wood Like a Beaver

FEATURES:1 to 2 plus full cords per hour (128 cubic feet)Cuts up to 16” diameter and up to 20’ lengthsSplits wood from 12” to 24” lengthsSplitter cycle time 4.5 secondsPTO drivenHonda Engine GX-630 630cc

Call Toll Free1-800-569-6813

www.woodbeaver.net | [email protected]

Beaver Model 16THE FIREWOOD FACTORY COMING

SOONNew Models4

Safe

Durable

Reliable Convenient

$8995Optional Features Availale

Starting at

‘09 JD 437C Loader w/DelimberItem ID: 12523Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

on TrailerItem ID: 12617Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

shape. It was being used to grind green waste but can also be used for processing many types of wood waste. With a pintle hitch for mobility, this machine is ready to be pulled to your site today and put to work. - Item ID-12361 - Michelle 800-315-9950 x603Iron Mule 4500 - Complete Overhauled Engine, Barko 40 Loader w/By Pass Bucket, Tires Like New - Item ID-12365 - Michelle 800-315-9950 x603Morgan 4 head Resaw - 3 phase 480V, belt driven,

running daily. - Item ID-12553 - Daren 800-315-9950 x603Prentice 210D - 1995, Model 210D Mounted On A Prentice Articulated Self Propelled Carrier, S/N 210P52736, Prentice C742 Grapple, Lever Controls, 6059 Deere Engine. Working daily,good dependable machine. - Item ID-12174 - Chris 800-315-9950 x600Rayco Stump Grinder Model RG1665AC - New teeth - Item ID-12374 - Daren 800-315-9950 x603Timberjack 450B single arch grapple skidder w/winch - Timberjack 450B single arch grapple skidder w/winch, 1409 hours, tires are at 50% +/-, Center pins are tight, Ready for the WOODS!! - Item ID-12511 - Michelle 800-315-9950 x603WANTED: USED 3-Wheeled Feller Bunchers - Lumberman’s has many customers who are looking for good used 3 wheeled bunchers like Valmet, Hydro-Ax, Bell, or Franklin. If you have an old but good

running machine you need to sell, give Tom a call at 800-315-9950 Ext. 604 to get your top dollar! - Item ID-12502 - Tom 800-315-9950 x604Wanted: USED Cat 518C Series Skidders - We have customers looking for CAT Model 518C Skidders in running condition. Grapple or Cable. Contact Tom. Will need serial numbers and photos. - Item ID-12432 - Tom 800-315-9950 x604WANTED: Used Clark F Series Skidders - If you have an older Clark F Series Cable or Grapple Skidder that you would like to sell, please call to discuss. We have customers looking. Year models are from around 1986 to 19995. - Item ID-12151 - Tom 800-315-9950 x604

MOULDERS2000 Pinheiro Moulder Planer - approx. 100 hours, 3 phase 480V, Used for Log siding. - Item ID-12554 - Daren 800-315-9950 x603

PALLET MACHINERY2005 Bronco Model 2006

Pallet Nailing System - Pallet nailing system with roll-out. Was used to build 48”x40”. New in 2005. One owner. - Item ID-12108 - Daren 800-315-9950 x603Smart Bandsaw Dismantler - 64” table. Two-man operation. Less than 100 hours on a complete rebuild. Powered by a 15-hp 3-phase motor. Push button table height adjustment. 400-700 pallets per 8 hour shift. Manufactured by Smart Products. - Item ID-11066 - Michelle 800-315-9950 x603Williams 200 H.P. Hammermill Grinder - This 200 H.P. hammermill was recently removed from a sawmill where it was being used to grind wood waste to boiler fuel for several large industrial customers. This grinder has a very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27” X 52”. This grinder is powered by a 200 H.P. electric motor that


Why?Why?We use only the highest quality nickel alloy steel NEW state of the art CNC milling centers for perfect pocket geometry

100 + years of combined hammering and manufacturing experience

Proudly made in the USAStock to 10 days on standard sizesNations largest distributor/manufacturer of saws and knives

www.usblades.net

CALL 800-862-4544Locations in

Hampden, ME Meridian, MS Florence, SC West Monroe, LA

operates at 1200 RPM and uses 460 voltage for its power. The electric motor is direct coupled to the grinder through a shear coupler to prevent damage from being done to the grinder. This machine is equipped with a bar type screen that determines the size material the machine is going to produce. Of course this screen can be changed to achieve many different size materials being produced from the same machine. This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical cabinet. This is a very nice clean unit and would work ideally for many grinding applications. - Item ID-12011 - Daren 800-315-9950 x603

PLANERSYates American Planer - Yates American Planer, model# 820-12, infeed deck, duct work to main line included, pineapple roller feed, currently up and running - Item ID-12556 - Daren 800-315-9950 x603

RECYCLING EQUIPMENT2003 Morbark 7600 - 3200 hours on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size! - Item ID-11830 - Michelle 800-315-9950 x6031987 Morbark 27 WCL NEEDS MOTOR - Morbark 1000 Knuckle boom loader, 3 knife disc, Newer discharge chute, New banding around disc, Brakes and tires are also OK, Everything works well Newer clutch -- with outboard bearing, Had Cummins KTTA 750 HP engine -- needs repower - Item ID-12443 - Daren 800-315-9950 x6031988 Morbark 27 RXL Whole Tree Chipper - Morbark 1000 loader, Cummins Engine, This Machine is ready to work!!!! - Item ID-12519 - Michelle 800-315-9950 x6031993 Morbark Model 20 Tracked Chipper - Just over 8000 hours. Very solid and compact machine in good condition and ready to work. Compact for the size. Has loader so unit is totally self contained. Tracks at 60%. Great value for a tracked chipper. - Item ID-12339 - Tom 800-315-9950 x6041998 Rotochopper 166 with Coloring system - less than 1000 hours on rebuilt Cat 3406 engine, 460hp, 2 sets of screens 2” and 4”, 2 types of hitches pintle and 5th wheel. This machine is priced well under its market value. - Item ID-12428 - Daren 800-315-9950 x6031999 CBI Model 4800 Grinder - 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just


HEAVY DUTY FORKSAT BIG SAVINGS

LET US QUOTE YOUR

BAY EQUIPMENT CO. / (616) 392-1811

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair.

Also, 4”, 5”, 6” thick forks to 168” long.

48” Precision 6’Knife Chip PakPriced Below Wholesale!


www.LBXonline.com

Late 80’s Case W20C Wheel Loader Item ID: 12606Contact: Daren

800.315.9950 Ext. 603

www.LBXonline.com

2006 Taylor T-160 Articulated Fork Truck (Unique!)Item ID: 12547Contact: Tom

Ph: 800-315-9950 x604

www.LBXonline.com

230 LoaderItem ID: 12616Contact: Tom

Ph: 800-315-9950 x604

www.LBXonline.com

completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800-315-9950 x6041999 CBI Model 4800 Grinder - 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very good condition - Item ID-12047 - Tom 800-315-9950 x6042000 Morbark 22RXL Chiphavester - The infeed area has been beefed up with T-1 steel for more strength and longer life with less weight. Enclosed weatherized operator’s cab tilts hydraulically for transport . Overall Length 38” Transport height 13’ 6” Width 10” 6” Weight 70000 lbs. Chipping capacity 22” diameter 750 hp 3412 CAT engine, M1000 loader - Item ID-12397 - Daren 800-315-9950 x6032001 Precision 23/66 Whole Tree Chipper - One Owner: S/N 3310. Cat 3412E engine with 750HP s/n 4CR01701. New Injectors. Includes air compressor. Oil changed

every 250 hours. 10,500 hours and runs like new. 3 axle trailer, California legal, rubber at 85%, and good brakes. Tows smooth. Equipped with Husky 175 loader. Has 3 knife disc with key knife system installed. Makes a super clean chip. Cab has heat and AC working well. Also has stereo radio and CB. New glass in loader. External chute controls. Super

Clean! - Item ID-12526 - Tom 800-315-9950 x6042002 Vermeer Horizonal Grinder Model HG365 - Cummins Engine, 365 HP, 20” capacity, New belt, New teeth, New floor plates - Item ID-12372 - Daren 800-315-9950 x6032003 MORBARK 1300 WCL TUB GRINDER - 1280 Hours, Morlift 400 loader with rotobec grapple, Cat

3412 engine, 860Hp, Twin Disc trans w dry clutch and driveline breakaway coupler. Air compressor. Cab is extra clean. Includes all manuals in cab - Item ID-12401 - Daren 800-315-9950 x6032003 MORBARK 1300 WCL TUB GRINDER - 1280 Hours, Morlift 400 loader with rotobec grapple, Cat 3412 engine, 860Hp, Twin


67th AnnualLake States Logging Congress & Equipment EXPO

‘05 Western Star w/’09 Lemco 75XLT LoaderItem ID: 12598Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

Clean-up Truck w/Serco Loader


www.LBXonline.com

Grapple SkidderItem ID: 12615Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

2011 Multitek 1620 w/40” Circle SawItem ID: 12577Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

Disc trans w dry clutch and driveline breakaway coupler. Air compressor. Cab is extra clean. Includes all manuals in cab - Item ID-12401 - Daren 800-315-9950 x6032006 GT25 Gyro Trac - Refurbished undercarriage at 80% with new tracks and new set of cutter teeth, this machine is work-ready. 773 hours on Cummins 230HP diesel, overall good condition. Pressurized cab, winch, ROPS. - Item ID-12268 - Tom 800-315-9950 x6042007 Morbark 22 RXL 1000HP Chipper - 8000 hrs. Cummins 1000 HP Engine runs strong. Just replaced feed tray, end spout, belly liners, hood liners, and one pump. Machine overall is in very good condition.

S/N 2043. DISCHARGE SYSTEM: Dirt separator with deflector Hydraulic swivel/telescoping discharge spout. CHIPPER: 22” diameter chipping capacity, 75” diameter four-knife chipper disc with LH rotation Chip sizes: 5/8”, 3/4”, 7/8”, 1”, 1-1/4”, 2”. Hydraulic chipper hood for easy knife access. 30” x 10’ CAT chain infeed bed. Enclosed weatherized operator’s cab is mounted on rubber shock absorbers with combination air conditioner/heater. Tilts hydraulically for transport. Six-way adjustable seat and joystick controls. Morbark 1000 knuckleboom loader, 25’ reach, 210º swing and by-pass grapple. Lift capacity of 20,000 lbs. at 10’. OPTIONS: reversing fan, twin disc clutch; Electronic RPM sensor with

automatic back feed; 11 hp quincy air compressor; pre lube on engine while starting. - Item ID-12449 - Tom 800-315-9950 x6042008 Morbark 3800 Wood Hog - Just refurbished at factory. Customer has invested $Thousands in upgrades to make ready for sale. Super Clean machine! Only 3064 hours. Very well maintained. S/N 189-1033. JD 600 HP Tier 3 Engine. Remote control. Mag End Pulley. Hydraulic Fan. Break away mounts. PT Tec Wet Clutch. 3” Hex Screens. - Item ID-12277 - Tom 800-315-9950 x6042009 CBI Grinder Model Magnum Force 6400T - Weight: 80,750 lbs. Cat C27 engine w/1050 HP. 1850 hours; 1 1/2” x 2” screen. 95% U/C. Customer has the feeder belt. Very good condition! - Item ID-12422 -

Tom 800-315-9950 x6042011 Morbark 40 x 36 Drum Chipper - 2400 hours on this well maintained chipper. 600 HP John Deere engine with 10 year warranty. Excellent Condition. Chip prices have dropped so owner is selling. Great price! - Item ID-12540 - Tom 800-315-9950 x604Haybuster IG-10 Tub Grinder - This 8-ft. tub is powered by a 275 hp CAT engine. This portable tub grinder has 48 swinging hammers and a set of 1” screens. Unit also has new clutch and belts, and the hammers are in good shape. It was being used to grind green waste but can also be used for processing many types of wood waste. With a pintle hitch for mobility, this machine is ready to be pulled to your


site today and put to work. - Item ID-12361 - Michelle 800-315-9950 x603

ROLLING STOCK1983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+ miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years – windshield, paint, front rims, tires, batteries, reman transmission, conversion to S-cam brake assemblies on front axle, rear brake shoes, air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss rods and frame rail, front grille, cab jack pump, recent clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor leaks. Parts truck available. Hood 7000 loader w/ 22-foot boom, butt grapple and 11k# lift capacity @ 10

feet. New in last 2 years – main boom cylinder, left grapple cylinder, rod ends in right grapple and jib boom cylinders, all other cylinders repacked and/or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/soft lines. Some minor leaks. will take offers! - Item ID-11796 - Michelle 800-315-9950 x603

SAWMILL1992 Sanborn sawmill Mini-Max - 36” x 20’ log capacity, 40 HP diesel engine, hydraulic power unit, uses 6” wide saw blades, includes (10) saws. This machine has a log cleaner ahead of the saw mounted on sawmill. - Item ID-12196 - Daren 800-315-9950 x6031998 Meadows #1 Portable Sawmill - Excellent Condition and a complete package: 50 series Detroit power unit; Fully

automatic; Cab a/c; Live deck 30 ft; 1 live off bearer belt; 1 set rolls 2 1/2’ x 30’; (1) 300 gallon air tank; (1) 500 gallon fuel tank; 2 sawdust sweeps; Meadows edger w/ John Deere power unit; Recent updates and minor repairs; Works and runs good w/ lots of extra features. GREAT VALUE! - Item ID-12461 - Tom 800-315-9950 x6042001 Timber Harvester Grade Resaw System - Capacity 12”x12”x16’, 28” dia all-steel band wheels, 30 HP electric motor, 1-1/2” blade package, Powered rollers, Pop-up cross-over chains, Board seperator, Off-line kicker-type turner, Push button setworks, Seperate hydraulic power pack for feed works - Item ID-12190 - Daren 800-315-9950 x6032008 Challenger Grinder Model CHSP 200-4090 -

Like New Condition. Only 315 hours. 120HP, 3-phase electric motor. 2 sets of screens, 3/4 and 1”. Photos say it all. Machine runs great. Owner lost contract. This machine makes great animal bedding. - Item ID-12284 - Tom 800-315-9950 x604

SHAVING EQUIPMENT1988 Jackson Shaving Mill - Model 1-13137-D-30, Hydraulic moving box, 50hp motor running heads, 2 heads 4 knives per head with cartridge blades, bottom discharge conveyor, 3 phase 480V. - Item ID-12555 - Daren 800-315-9950 x6032009 Salsco 30 in. Shaving Mill - 1255 Hours, 4 Sets Of Knives, 8 ft. Blower Pipe Extention, C4,4TA Cat Engine, Original Owner, Excellent Condition, Can See Running! - Item ID-12182 - Chris 800-315-9950 x600

PRSRT STD.U.S. Postage

PAIDPermit No. 212

Pulaski, TN

The Lumberman's Exchange brought to you by LBXonline.com

Documents

Transcript of The Lumberman's Exchange brought to you by LBXonline.com